Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

92 files changed, 3416 insertions, 1883 deletions

diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cf2fce7..6df1dfd 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -14,7 +14,7 @@
   </authorgroup>
 
   <copyright>
-   <year>2003</year>
+   <year>2003-2005</year>
    <holder>Jeff Garzik</holder>
   </copyright>
 
@@ -44,30 +44,38 @@
 
 <toc></toc>
 
-  <chapter id="libataThanks">
-     <title>Thanks</title>
+  <chapter id="libataIntroduction">
+     <title>Introduction</title>
   <para>
-  The bulk of the ATA knowledge comes thanks to long conversations with
-  Andre Hedrick (www.linux-ide.org).
+  libATA is a library used inside the Linux kernel to support ATA host
+  controllers and devices.  libATA provides an ATA driver API, class
+  transports for ATA and ATAPI devices, and SCSI&lt;-&gt;ATA translation
+  for ATA devices according to the T10 SAT specification.
   </para>
   <para>
-  Thanks to Alan Cox for pointing out similarities 
-  between SATA and SCSI, and in general for motivation to hack on
-  libata.
-  </para>
-  <para>
-  libata's device detection
-  method, ata_pio_devchk, and in general all the early probing was
-  based on extensive study of Hale Landis's probe/reset code in his
-  ATADRVR driver (www.ata-atapi.com).
+  This Guide documents the libATA driver API, library functions, library
+  internals, and a couple sample ATA low-level drivers.
   </para>
   </chapter>
 
   <chapter id="libataDriverApi">
      <title>libata Driver API</title>
+     <para>
+     struct ata_port_operations is defined for every low-level libata
+     hardware driver, and it controls how the low-level driver
+     interfaces with the ATA and SCSI layers.
+     </para>
+     <para>
+     FIS-based drivers will hook into the system with ->qc_prep() and
+     ->qc_issue() high-level hooks.  Hardware which behaves in a manner
+     similar to PCI IDE hardware may utilize several generic helpers,
+     defining at a bare minimum the bus I/O addresses of the ATA shadow
+     register blocks.
+     </para>
      <sect1>
         <title>struct ata_port_operations</title>
 
+	<sect2><title>Disable ATA port</title>
 	<programlisting>
 void (*port_disable) (struct ata_port *);
 	</programlisting>
@@ -78,6 +86,9 @@ void (*port_disable) (struct ata_port *);
 	unplug).
 	</para>
 
+	</sect2>
+
+	<sect2><title>Post-IDENTIFY device configuration</title>
 	<programlisting>
 void (*dev_config) (struct ata_port *, struct ata_device *);
 	</programlisting>
@@ -88,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Set PIO/DMA mode</title>
 	<programlisting>
 void (*set_piomode) (struct ata_port *, struct ata_device *);
 void (*set_dmamode) (struct ata_port *, struct ata_device *);
@@ -108,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap);
 	->set_dma_mode() is only called if DMA is possible.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Taskfile read/write</title>
 	<programlisting>
 void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
 void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -120,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	taskfile register values.
 	</para>
 
+	</sect2>
+
+	<sect2><title>ATA command execute</title>
 	<programlisting>
 void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
@@ -129,17 +149,37 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	->tf_load(), to be initiated in hardware.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
+	<programlisting>
+int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+	</programlisting>
+
+	<para>
+Allow low-level driver to filter ATA PACKET commands, returning a status
+indicating whether or not it is OK to use DMA for the supplied PACKET
+command.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
 u8   (*check_status)(struct ata_port *ap);
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*check_err)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
-	Reads the Status ATA shadow register from hardware.  On some
-	hardware, this has the side effect of clearing the interrupt
-	condition.
+	Reads the Status/AltStatus/Error ATA shadow register from
+	hardware.  On some hardware, reading the Status register has
+	the side effect of clearing the interrupt condition.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
 void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
@@ -147,9 +187,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	<para>
 	Issues the low-level hardware command(s) that causes one of N
 	hardware devices to be considered 'selected' (active and
-	available for use) on the ATA bus.
+	available for use) on the ATA bus.  This generally has no
+meaning on FIS-based devices.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Reset ATA bus</title>
 	<programlisting>
 void (*phy_reset) (struct ata_port *ap);
 	</programlisting>
@@ -162,17 +206,31 @@ void (*phy_reset) (struct ata_port *ap);
 	functions ata_bus_reset() or sata_phy_reset() for this hook.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Control PCI IDE BMDMA engine</title>
 	<programlisting>
 void (*bmdma_setup) (struct ata_queued_cmd *qc);
 void (*bmdma_start) (struct ata_queued_cmd *qc);
+void (*bmdma_stop) (struct ata_port *ap);
+u8   (*bmdma_status) (struct ata_port *ap);
 	</programlisting>
 
 	<para>
-	When setting up an IDE BMDMA transaction, these hooks arm
-	(->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
-	engine.
+When setting up an IDE BMDMA transaction, these hooks arm
+(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
+the hardware's DMA engine.  ->bmdma_status is used to read the standard
+PCI IDE DMA Status register.
 	</para>
 
+	<para>
+These hooks are typically either no-ops, or simply not implemented, in
+FIS-based drivers.
+	</para>
+
+	</sect2>
+
+	<sect2><title>High-level taskfile hooks</title>
 	<programlisting>
 void (*qc_prep) (struct ata_queued_cmd *qc);
 int (*qc_issue) (struct ata_queued_cmd *qc);
@@ -190,20 +248,26 @@ int (*qc_issue) (struct ata_queued_cmd *qc);
 	->qc_issue is used to make a command active, once the hardware
 	and S/G tables have been prepared.  IDE BMDMA drivers use the
 	helper function ata_qc_issue_prot() for taskfile protocol-based
-	dispatch.  More advanced drivers roll their own ->qc_issue
-	implementation, using this as the "issue new ATA command to
-	hardware" hook.
+	dispatch.  More advanced drivers implement their own ->qc_issue.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Timeout (error) handling</title>
 	<programlisting>
 void (*eng_timeout) (struct ata_port *ap);
 	</programlisting>
 
 	<para>
-	This is a high level error handling function, called from the
-	error handling thread, when a command times out.
+This is a high level error handling function, called from the
+error handling thread, when a command times out.  Most newer
+hardware will implement its own error handling code here.  IDE BMDMA
+drivers may use the helper function ata_eng_timeout().
 	</para>
 
+	</sect2>
+
+	<sect2><title>Hardware interrupt handling</title>
 	<programlisting>
 irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
 void (*irq_clear) (struct ata_port *);
@@ -216,6 +280,9 @@ void (*irq_clear) (struct ata_port *);
 	is quiet.
 	</para>
 
+	</sect2>
+
+	<sect2><title>SATA phy read/write</title>
 	<programlisting>
 u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
 void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@@ -227,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
 	if ->phy_reset hook called the sata_phy_reset() helper function.
 	</para>
 
+	</sect2>
+
+	<sect2><title>Init and shutdown</title>
 	<programlisting>
 int (*port_start) (struct ata_port *ap);
 void (*port_stop) (struct ata_port *ap);
@@ -240,15 +310,17 @@ void (*host_stop) (struct ata_host_set *host_set);
 	tasks.  
 	</para>
 	<para>
-	->host_stop() is called when the rmmod or hot unplug process
-	begins.  The hook must stop all hardware interrupts, DMA
-	engines, etc.
-	</para>
-	<para>
 	->port_stop() is called after ->host_stop().  It's sole function
 	is to release DMA/memory resources, now that they are no longer
 	actively being used.
 	</para>
+	<para>
+	->host_stop() is called after all ->port_stop() calls
+have completed.  The hook must finalize hardware shutdown, release DMA
+and other resources, etc.
+	</para>
+
+	</sect2>
 
      </sect1>
   </chapter>
@@ -279,4 +351,24 @@ void (*host_stop) (struct ata_host_set *host_set);
 !Idrivers/scsi/sata_sil.c
   </chapter>
 
+  <chapter id="libataThanks">
+     <title>Thanks</title>
+  <para>
+  The bulk of the ATA knowledge comes thanks to long conversations with
+  Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
+  and SCSI specifications.
+  </para>
+  <para>
+  Thanks to Alan Cox for pointing out similarities 
+  between SATA and SCSI, and in general for motivation to hack on
+  libata.
+  </para>
+  <para>
+  libata's device detection
+  method, ata_pio_devchk, and in general all the early probing was
+  based on extensive study of Hale Landis's probe/reset code in his
+  ATADRVR driver (www.ata-atapi.com).
+  </para>
+  </chapter>
+
 </book>
diff --git a/MAINTAINERS b/MAINTAINERS
index 97bc927..65ad825 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -239,6 +239,12 @@ L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
 
+ALI1563 I2C DRIVER
+P:	Rudolf Marek
+M:	r.marek@sh.cvut.cz
+L:	sensors@stimpy.netroedge.com
+S:	Maintained
+
 ALPHA PORT
 P:	Richard Henderson
 M:	rth@twiddle.net
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 247a21c..c1e20d6 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents,
 {
 	struct epoll_event *events64 = NULL;
 	mm_segment_t old_fs = get_fs();
-	int error, numevents, size;
+	int numevents, size;
 	int evt_idx;
 	int do_free_pages = 0;
 
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 2c75741..736e328 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs)
 	return IRQ_HANDLED;
 }
 
-#endif /* CONFIG_ACPI */
-
 /*
  *  ia64_mca_cpe_poll
  *
@@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy)
 	platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0);
 }
 
+#endif /* CONFIG_ACPI */
+
 /*
  * C portion of the OS INIT handler
  *
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 2b6c9d3..c4a33f2 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -45,11 +45,13 @@ asmlinkage void ret_from_fork(void);
  */
 void default_idle(void)
 {
-	while(1) {
-		if (need_resched())
-			__asm__("stop #0x2000" : : : "cc");
-		schedule();
+	local_irq_disable();
+ 	while (!need_resched()) {
+		/* This stop will re-enable interrupts */
+ 		__asm__("stop #0x2000" : : : "cc");
+		local_irq_disable();
 	}
+	local_irq_enable();
 }
 
 void (*idle)(void) = default_idle;
@@ -63,7 +65,12 @@ void (*idle)(void) = default_idle;
 void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
-	idle();
+	while (1) {
+		idle();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
 }
 
 void machine_restart(char * __unused)
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
index 2cee871..7f15136 100644
--- a/arch/ppc/syslib/prom_init.c
+++ b/arch/ppc/syslib/prom_init.c
@@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad,
 	l = call_prom("package-to-path", 3, 1, node,
 		      mem_start, mem_end - mem_start);
 	if (l >= 0) {
+		char *p, *ep;
+
 		np->full_name = PTRUNRELOC((char *) mem_start);
 		*(char *)(mem_start + l) = 0;
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = (char *)mem_start, ep = p + l; p < ep; p++)
+			if ((*p) == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--;
+			}
 		mem_start = ALIGNUL(mem_start + l + 1);
 	}
 
diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S
index d360405..b61572e 100644
--- a/arch/ppc64/kernel/entry.S
+++ b/arch/ppc64/kernel/entry.S
@@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)
 
-#ifdef CONFIG_PPC_ISERIES
-	clrrdi	r7,r1,THREAD_SHIFT	/* get current_thread_info() */
-	ld	r7,TI_FLAGS(r7)		/* Get run light flag */
-	mfspr	r9,CTRLF
-	srdi	r7,r7,TIF_RUN_LIGHT
-	insrdi	r9,r7,1,63		/* Insert run light into CTRL */
-	mtspr	CTRLT,r9
-#endif
-
 	/* convert old thread to its task_struct for return value */
 	addi	r3,r3,-THREAD
 	ld	r7,_NIP(r1)	/* Return to _switch caller in new task */
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 92a744c..346dbf6 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -626,10 +626,10 @@ system_reset_iSeries:
 	lhz	r24,PACAPACAINDEX(r13)	/* Get processor # */
 	cmpwi	0,r24,0			/* Are we processor 0? */
 	beq	.__start_initialization_iSeries	/* Start up the first processor */
-	mfspr	r4,CTRLF
-	li	r5,RUNLATCH		/* Turn off the run light */
+	mfspr	r4,SPRN_CTRLF
+	li	r5,CTRL_RUNLATCH	/* Turn off the run light */
 	andc	r4,r4,r5
-	mtspr	CTRLT,r4
+	mtspr	SPRN_CTRLT,r4
 
 1:
 	HMT_LOW
@@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary)
 	mfspr	r4, HID0
 	ori	r4, r4, 0x1
 	mtspr	HID0, r4
-	mfspr	r4, CTRLF
+	mfspr	r4, SPRN_CTRLF
 	oris	r4, r4, 0x40
-	mtspr	CTRLT, r4
+	mtspr	SPRN_CTRLT, r4
 	blr
 #endif
 
diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c
index da20120..6d06eb5 100644
--- a/arch/ppc64/kernel/iSeries_setup.c
+++ b/arch/ppc64/kernel/iSeries_setup.c
@@ -852,6 +852,28 @@ static int __init iSeries_src_init(void)
 
 late_initcall(iSeries_src_init);
 
+static int set_spread_lpevents(char *str)
+{
+	unsigned long i;
+	unsigned long val = simple_strtoul(str, NULL, 0);
+
+	/*
+	 * The parameter is the number of processors to share in processing
+	 * lp events.
+	 */
+	if (( val > 0) && (val <= NR_CPUS)) {
+		for (i = 1; i < val; ++i)
+			paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
+
+		printk("lpevent processing spread over %ld processors\n", val);
+	} else {
+		printk("invalid spread_lpevents %ld\n", val);
+	}
+
+	return 1;
+}
+__setup("spread_lpevents=", set_spread_lpevents);
+
 void __init iSeries_early_setup(void)
 {
 	iSeries_fixup_klimit();
diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
index 6abc621..f24ce2b 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/ppc64/kernel/idle.c
@@ -75,13 +75,9 @@ static int iSeries_idle(void)
 {
 	struct paca_struct *lpaca;
 	long oldval;
-	unsigned long CTRL;
 
 	/* ensure iSeries run light will be out when idle */
-	clear_thread_flag(TIF_RUN_LIGHT);
-	CTRL = mfspr(CTRLF);
-	CTRL &= ~RUNLATCH;
-	mtspr(CTRLT, CTRL);
+	ppc64_runlatch_off();
 
 	lpaca = get_paca();
 
@@ -111,7 +107,9 @@ static int iSeries_idle(void)
 			}
 		}
 
+		ppc64_runlatch_on();
 		schedule();
+		ppc64_runlatch_off();
 	}
 
 	return 0;
diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c
index cb5443f..dc2a69d 100644
--- a/arch/ppc64/kernel/pSeries_reconfig.c
+++ b/arch/ppc64/kernel/pSeries_reconfig.c
@@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np)
 		remove_proc_entry(pp->name, np->pde);
 		pp = pp->next;
 	}
-
-	/* Assuming that symlinks have the same parent directory as
-	 * np->pde.
-	 */
-	if (np->name_link)
-		remove_proc_entry(np->name_link->name, parent->pde);
-	if (np->addr_link)
-		remove_proc_entry(np->addr_link->name, parent->pde);
 	if (np->pde)
 		remove_proc_entry(np->pde->name, parent->pde);
 }
diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c
index 8b06861..cdfecbe 100644
--- a/arch/ppc64/kernel/process.c
+++ b/arch/ppc64/kernel/process.c
@@ -378,9 +378,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		childregs->gpr[1] = sp + sizeof(struct pt_regs);
 		p->thread.regs = NULL;	/* no user register state */
 		clear_ti_thread_flag(p->thread_info, TIF_32BIT);
-#ifdef CONFIG_PPC_ISERIES
-		set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
-#endif
 	} else {
 		childregs->gpr[1] = usp;
 		p->thread.regs = childregs;
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index bc53967..b7683ab 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -211,13 +211,23 @@ struct {
  */
 #define ADDR(x)		(u32) ((unsigned long)(x) - offset)
 
+/*
+ * Error results ... some OF calls will return "-1" on error, some
+ * will return 0, some will return either. To simplify, here are
+ * macros to use with any ihandle or phandle return value to check if
+ * it is valid
+ */
+
+#define PROM_ERROR		(-1u)
+#define PHANDLE_VALID(p)	((p) != 0 && (p) != PROM_ERROR)
+#define IHANDLE_VALID(i)	((i) != 0 && (i) != PROM_ERROR)
+
+
 /* This is the one and *ONLY* place where we actually call open
  * firmware from, since we need to make sure we're running in 32b
  * mode when we do.  We switch back to 64b mode upon return.
  */
 
-#define PROM_ERROR	(-1)
-
 static int __init call_prom(const char *service, int nargs, int nret, ...)
 {
 	int i;
@@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void)
 {
 	unsigned long offset = reloc_offset();
 	ihandle elfloader;
-	int ret;
 
 	elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
 	if (elfloader == 0) {
 		prom_printf("couldn't open /packages/elf-loader\n");
 		return;
 	}
-	ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+	call_prom("call-method", 3, 1, ADDR("process-elf-header"),
 			elfloader, ADDR(&fake_elf));
 	call_prom("close", 1, 0, elfloader);
 }
@@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align)
 	    base = _ALIGN_UP(base + 0x100000, align)) {
 		prom_debug("    trying: 0x%x\n\r", base);
 		addr = (unsigned long)prom_claim(base, size, 0);
-		if ((int)addr != PROM_ERROR)
+		if (addr != PROM_ERROR)
 			break;
 		addr = 0;
 		if (align == 0)
@@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align,
 	for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align))  {
 		prom_debug("    trying: 0x%x\n\r", base);
 		addr = (unsigned long)prom_claim(base, size, 0);
-		if ((int)addr != PROM_ERROR)
+		if (addr != PROM_ERROR)
 			break;
 		addr = 0;
 	}
@@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void)
 {
 	unsigned long offset = reloc_offset();
 	struct prom_t *_prom = PTRRELOC(&prom);
-	phandle prom_rtas, rtas_node;
+	phandle rtas_node;
+	ihandle rtas_inst;
 	u32 base, entry = 0;
 	u32 size = 0;
 
 	prom_debug("prom_instantiate_rtas: start...\n");
 
-	prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
-	prom_debug("prom_rtas: %x\n", prom_rtas);
-	if (prom_rtas == (phandle) -1)
+	rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+	prom_debug("rtas_node: %x\n", rtas_node);
+	if (!PHANDLE_VALID(rtas_node))
 		return;
 
-	prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+	prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
 	if (size == 0)
 		return;
 
@@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void)
 		prom_printf("RTAS allocation failed !\n");
 		return;
 	}
-	prom_printf("instantiating rtas at 0x%x", base);
 
-	rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
-	prom_printf("...");
+	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
+	if (!IHANDLE_VALID(rtas_inst)) {
+		prom_printf("opening rtas package failed");
+		return;
+	}
+
+	prom_printf("instantiating rtas at 0x%x ...", base);
 
 	if (call_prom("call-method", 3, 2,
 		      ADDR("instantiate-rtas"),
-		      rtas_node, base) != PROM_ERROR) {
+		      rtas_inst, base) != PROM_ERROR) {
 		entry = (long)_prom->args.rets[1];
 	}
 	if (entry == 0) {
@@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void)
 
 	reserve_mem(base, size);
 
-	prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
-	prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+	prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
+	prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
 
 	prom_debug("rtas base     = 0x%x\n", base);
 	prom_debug("rtas entry    = 0x%x\n", entry);
@@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void)
 
 		prom_printf("opening PHB %s", path);
 		phb_node = call_prom("open", 1, 1, path);
-		if ( (long)phb_node <= 0)
+		if (phb_node == 0)
 			prom_printf("... failed\n");
 		else
 			prom_printf("... done\n");
@@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp)
 
 	/* get a handle for the stdout device */
 	_prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
-	if ((long)_prom->chosen <= 0)
+	if (!PHANDLE_VALID(_prom->chosen))
 		prom_panic("cannot find chosen"); /* msg won't be printed :( */
 
 	/* get device tree root */
 	_prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
-	if ((long)_prom->root <= 0)
+	if (!PHANDLE_VALID(_prom->root))
 		prom_panic("cannot find device tree root"); /* msg won't be printed :( */
 }
 
@@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void)
 	}
 	/* Default to pSeries. We need to know if we are running LPAR */
 	rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
-	if (rtas != (phandle) -1) {
-		unsigned long x;
-		x = prom_getproplen(rtas, "ibm,hypertas-functions");
+	if (PHANDLE_VALID(rtas)) {
+		int x = prom_getproplen(rtas, "ibm,hypertas-functions");
 		if (x != PROM_ERROR) {
 			prom_printf("Hypertas detected, assuming LPAR !\n");
 			return PLATFORM_PSERIES_LPAR;
@@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void)
 		 * leave some room at the end of the path for appending extra
 		 * arguments
 		 */
-		if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+		if (call_prom("package-to-path", 3, 1, node, path,
+			      PROM_SCRATCH_SIZE-10) == PROM_ERROR)
 			continue;
 		prom_printf("found display   : %s, opening ... ", path);
 		
 		ih = call_prom("open", 1, 1, path);
-		if (ih == (ihandle)0 || ih == (ihandle)-1) {
+		if (ih == 0) {
 			prom_printf("failed\n");
 			continue;
 		}
@@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str)
 	return 0;
 }
 
+/*
+ * The Open Firmware 1275 specification states properties must be 31 bytes or
+ * less, however not all firmwares obey this. Make it 64 bytes to be safe.
+ */
+#define MAX_PROPERTY_NAME 64
+
 static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
 					 unsigned long *mem_end)
 {
@@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
 	/* get and store all property names */
 	prev_name = RELOC("");
 	for (;;) {
-		
-		/* 32 is max len of name including nul. */
-		namep = make_room(mem_start, mem_end, 32, 1);
-		if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+		int rc;
+
+		/* 64 is max len of name including nul. */
+		namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
+		rc = call_prom("nextprop", 3, 1, node, prev_name, namep);
+		if (rc != 1) {
 			/* No more nodes: unwind alloc */
 			*mem_start = (unsigned long)namep;
 			break;
@@ -1555,18 +1577,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
 	}
 }
 
-/*
- * The Open Firmware 1275 specification states properties must be 31 bytes or
- * less, however not all firmwares obey this. Make it 64 bytes to be safe.
- */
-#define MAX_PROPERTY_NAME 64
-
 static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 					unsigned long *mem_end)
 {
 	int l, align;
 	phandle child;
-	char *namep, *prev_name, *sstart;
+	char *namep, *prev_name, *sstart, *p, *ep;
 	unsigned long soff;
 	unsigned char *valp;
 	unsigned long offset = reloc_offset();
@@ -1588,6 +1604,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 			call_prom("package-to-path", 3, 1, node, namep, l);
 		}
 		namep[l] = '\0';
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = namep, ep = namep + l; p < ep; p++)
+			if (*p == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--; l--;
+			}
 		*mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4);
 	}
 
@@ -1599,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 	prev_name = RELOC("");
 	sstart = (char *)RELOC(dt_string_start);
 	for (;;) {
-		if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+		int rc;
+
+		rc = call_prom("nextprop", 3, 1, node, prev_name, pname);
+		if (rc != 1)
 			break;
 
 		/* find string offset */
@@ -1615,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 		l = call_prom("getproplen", 2, 1, node, pname);
 
 		/* sanity checks */
-		if (l < 0)
+		if (l == PROM_ERROR)
 			continue;
 		if (l > MAX_PROPERTY_LENGTH) {
 			prom_printf("WARNING: ignoring large property ");
@@ -1763,17 +1790,18 @@ static void __init fixup_device_tree(void)
 
 	/* Some G5s have a missing interrupt definition, fix it up here */
 	u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
-	if ((long)u3 <= 0)
+	if (!PHANDLE_VALID(u3))
 		return;
 	i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
-	if ((long)i2c <= 0)
+	if (!PHANDLE_VALID(i2c))
 		return;
 	mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
-	if ((long)mpic <= 0)
+	if (!PHANDLE_VALID(mpic))
 		return;
 
 	/* check if proper rev of u3 */
-	if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+	if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
+	    == PROM_ERROR)
 		return;
 	if (u3_rev != 0x35)
 		return;
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 21c57f5..dce198d 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -103,11 +103,6 @@ extern void unflatten_device_tree(void);
 
 extern void smp_release_cpus(void);
 
-unsigned long decr_overclock = 1;
-unsigned long decr_overclock_proc0 = 1;
-unsigned long decr_overclock_set = 0;
-unsigned long decr_overclock_proc0_set = 0;
-
 int have_of = 1;
 int boot_cpuid = 0;
 int boot_cpuid_phys = 0;
@@ -1120,64 +1115,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg)
 	printk("[dump]%04x %s\n", src, msg);
 }
 
-int set_spread_lpevents( char * str )
-{
-	/* The parameter is the number of processors to share in processing lp events */
-	unsigned long i;
-	unsigned long val = simple_strtoul( str, NULL, 0 );
-	if ( ( val > 0 ) && ( val <= NR_CPUS ) ) {
-		for ( i=1; i<val; ++i )
-			paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
-		printk("lpevent processing spread over %ld processors\n", val);
-	}
-	else
-		printk("invalid spreaqd_lpevents %ld\n", val);
-	return 1;
-}	
-
 /* This should only be called on processor 0 during calibrate decr */
 void setup_default_decr(void)
 {
 	struct paca_struct *lpaca = get_paca();
 
-	if ( decr_overclock_set && !decr_overclock_proc0_set )
-		decr_overclock_proc0 = decr_overclock;
-
-	lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0;	
+	lpaca->default_decr = tb_ticks_per_jiffy;
 	lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
 }
 
-int set_decr_overclock_proc0( char * str )
-{
-	unsigned long val = simple_strtoul( str, NULL, 0 );
-	if ( ( val >= 1 ) && ( val <= 48 ) ) {
-		decr_overclock_proc0_set = 1;
-		decr_overclock_proc0 = val;
-		printk("proc 0 decrementer overclock factor of %ld\n", val);
-	}
-	else
-		printk("invalid proc 0 decrementer overclock factor of %ld\n", val);
-	return 1;
-}
-
-int set_decr_overclock( char * str )
-{
-	unsigned long val = simple_strtoul( str, NULL, 0 );
-	if ( ( val >= 1 ) && ( val <= 48 ) ) {
-		decr_overclock_set = 1;
-		decr_overclock = val;
-		printk("decrementer overclock factor of %ld\n", val);
-	}
-	else
-		printk("invalid decrementer overclock factor of %ld\n", val);
-	return 1;
-
-}
-
-__setup("spread_lpevents=", set_spread_lpevents );
-__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
-__setup("decr_overclock=", set_decr_overclock );
-
 #ifndef CONFIG_PPC_ISERIES
 /*
  * This function can be used by platforms to "find" legacy serial ports.
diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c
index 3b906cd..9ef5d36 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/ppc64/kernel/smp.c
@@ -334,7 +334,6 @@ void smp_call_function_interrupt(void)
 	}
 }
 
-extern unsigned long decr_overclock;
 extern struct gettimeofday_struct do_gtod;
 
 struct thread_info *current_set[NR_CPUS];
@@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu)
 	if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
 		return -EINVAL;
 
-	paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock;
+	paca[cpu].default_decr = tb_ticks_per_jiffy;
 
 	if (!cpu_has_feature(CPU_FTR_SLB)) {
 		void *tmp;
diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c
index 0925694..c8fa656 100644
--- a/arch/ppc64/kernel/sysfs.c
+++ b/arch/ppc64/kernel/sysfs.c
@@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void)
 #ifdef CONFIG_PPC_PSERIES
 	unsigned long set, reset;
 	int ret;
-	unsigned int ctrl;
 #endif /* CONFIG_PPC_PSERIES */
 
 	/* Only need to enable them once */
@@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void)
 	 * On SMT machines we have to set the run latch in the ctrl register
 	 * in order to make PMC6 spin.
 	 */
-	if (cpu_has_feature(CPU_FTR_SMT)) {
-		ctrl = mfspr(CTRLF);
-		ctrl |= RUNLATCH;
-		mtspr(CTRLT, ctrl);
-	}
+	if (cpu_has_feature(CPU_FTR_SMT))
+		ppc64_runlatch_on();
 #endif /* CONFIG_PPC_PSERIES */
 }
 
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 01ae196..c067435 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -28,6 +28,7 @@
 //#include <linux/kernel_stat.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
+#include <linux/workqueue.h>
 
 #include "appldata.h"
 
@@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
 
 /*
- * Tasklet
+ * Work queue
  */
-static struct tasklet_struct appldata_tasklet_struct;
+static struct workqueue_struct *appldata_wq;
+static void appldata_work_fn(void *data);
+static DECLARE_WORK(appldata_work, appldata_work_fn, NULL);
+
 
 /*
  * Ops list
@@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock);
 static LIST_HEAD(appldata_ops_list);
 
 
-/************************* timer, tasklet, DIAG ******************************/
+/*************************** timer, work, DIAG *******************************/
 /*
  * appldata_timer_function()
  *
- * schedule tasklet and reschedule timer
+ * schedule work and reschedule timer
  */
 static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
 {
@@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
 		atomic_read(&appldata_expire_count));
 	if (atomic_dec_and_test(&appldata_expire_count)) {
 		atomic_set(&appldata_expire_count, num_online_cpus());
-		tasklet_schedule((struct tasklet_struct *) data);
+		queue_work(appldata_wq, (struct work_struct *) data);
 	}
 }
 
 /*
- * appldata_tasklet_function()
+ * appldata_work_fn()
  *
  * call data gathering function for each (active) module
  */
-static void appldata_tasklet_function(unsigned long data)
+static void appldata_work_fn(void *data)
 {
 	struct list_head *lh;
 	struct appldata_ops *ops;
 	int i;
 
-	P_DEBUG("  -= Tasklet =-\n");
+	P_DEBUG("  -= Work Queue =-\n");
 	i = 0;
 	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
@@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
 			: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
 	return (int) ry;
 }
-/********************** timer, tasklet, DIAG <END> ***************************/
+/************************ timer, work, DIAG <END> ****************************/
 
 
 /****************************** /proc stuff **********************************/
@@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 	struct list_head *lh;
 
 	found = 0;
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		if (&tmp_ops->ctl_table[2] == ctl) {
@@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		}
 	}
 	if (!found) {
-		spin_unlock_bh(&appldata_ops_lock);
+		spin_unlock(&appldata_ops_lock);
 		return -ENODEV;
 	}
 	ops = ctl->data;
 	if (!try_module_get(ops->owner)) {	// protect this function
-		spin_unlock_bh(&appldata_ops_lock);
+		spin_unlock(&appldata_ops_lock);
 		return -ENODEV;
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	if (!*lenp || *ppos) {
 		*lenp = 0;
@@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		return -EFAULT;
 	}
 
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	if ((buf[0] == '1') && (ops->active == 0)) {
-		if (!try_module_get(ops->owner)) {	// protect tasklet
-			spin_unlock_bh(&appldata_ops_lock);
+		// protect work queue callback
+		if (!try_module_get(ops->owner)) {
+			spin_unlock(&appldata_ops_lock);
 			module_put(ops->owner);
 			return -ENODEV;
 		}
@@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		}
 		module_put(ops->owner);
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 out:
 	*lenp = len;
 	*ppos += len;
@@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops)
 	}
 	memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table));
 
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n",
@@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops)
 				APPLDATA_PROC_NAME_LENGTH) == 0) {
 			P_ERROR("Name \"%s\" already registered!\n", ops->name);
 			kfree(ops->ctl_table);
-			spin_unlock_bh(&appldata_ops_lock);
+			spin_unlock(&appldata_ops_lock);
 			return -EBUSY;
 		}
 		if (tmp_ops->ctl_nr == ops->ctl_nr) {
 			P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr);
 			kfree(ops->ctl_table);
-			spin_unlock_bh(&appldata_ops_lock);
+			spin_unlock(&appldata_ops_lock);
 			return -EBUSY;
 		}
 	}
 	list_add(&ops->list, &appldata_ops_list);
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	ops->ctl_table[0].ctl_name = CTL_APPLDATA;
 	ops->ctl_table[0].procname = appldata_proc_name;
@@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops)
  */
 void appldata_unregister_ops(struct appldata_ops *ops)
 {
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	unregister_sysctl_table(ops->sysctl_header);
 	list_del(&ops->list);
 	kfree(ops->ctl_table);
 	ops->ctl_table = NULL;
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 	P_INFO("%s-ops unregistered!\n", ops->name);
 }
 /********************** module-ops management <END> **************************/
@@ -602,7 +607,7 @@ appldata_online_cpu(int cpu)
 	init_virt_timer(&per_cpu(appldata_timer, cpu));
 	per_cpu(appldata_timer, cpu).function = appldata_timer_function;
 	per_cpu(appldata_timer, cpu).data = (unsigned long)
-		&appldata_tasklet_struct;
+		&appldata_work;
 	atomic_inc(&appldata_expire_count);
 	spin_lock(&appldata_timer_lock);
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu)
 	del_virt_timer(&per_cpu(appldata_timer, cpu));
 	if (atomic_dec_and_test(&appldata_expire_count)) {
 		atomic_set(&appldata_expire_count, num_online_cpus());
-		tasklet_schedule(&appldata_tasklet_struct);
+		queue_work(appldata_wq, &appldata_work);
 	}
 	spin_lock(&appldata_timer_lock);
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = {
 /*
  * appldata_init()
  *
- * init timer and tasklet, register /proc entries
+ * init timer, register /proc entries
  */
 static int __init appldata_init(void)
 {
@@ -657,6 +662,12 @@ static int __init appldata_init(void)
 	P_DEBUG("sizeof(parameter_list) = %lu\n",
 		sizeof(struct appldata_parameter_list));
 
+	appldata_wq = create_singlethread_workqueue("appldata");
+	if (!appldata_wq) {
+		P_ERROR("Could not create work queue\n");
+		return -ENOMEM;
+	}
+
 	for_each_online_cpu(i)
 		appldata_online_cpu(i);
 
@@ -670,7 +681,6 @@ static int __init appldata_init(void)
 	appldata_table[1].de->owner = THIS_MODULE;
 #endif
 
-	tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0);
 	P_DEBUG("Base interface initialized.\n");
 	return 0;
 }
@@ -678,7 +688,7 @@ static int __init appldata_init(void)
 /*
  * appldata_exit()
  *
- * stop timer and tasklet, unregister /proc entries
+ * stop timer, unregister /proc entries
  */
 static void __exit appldata_exit(void)
 {
@@ -690,7 +700,7 @@ static void __exit appldata_exit(void)
 	/*
 	 * ops list should be empty, but just in case something went wrong...
 	 */
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
 		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
@@ -700,7 +710,7 @@ static void __exit appldata_exit(void)
 				"return code: %d\n", ops->name, rc);
 		}
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	for_each_online_cpu(i)
 		appldata_offline_cpu(i);
@@ -709,7 +719,7 @@ static void __exit appldata_exit(void)
 
 	unregister_sysctl_table(appldata_sysctl_header);
 
-	tasklet_kill(&appldata_tasklet_struct);
+	destroy_workqueue(appldata_wq);
 	P_DEBUG("... module unloaded!\n");
 }
 /**************************** init / exit <END> ******************************/
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 462ee9a..f0e2fbe 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -68,7 +68,7 @@ struct appldata_mem_data {
 	u64 pgmajfault;		/* page faults (major only) */
 // <-- New in 2.6
 
-} appldata_mem_data;
+} __attribute__((packed)) appldata_mem_data;
 
 
 static inline void appldata_debug_print(struct appldata_mem_data *mem_data)
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index dd61638..2a4c743 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -57,7 +57,7 @@ struct appldata_net_sum_data {
 	u64 rx_dropped;		/* no space in linux buffers     */
 	u64 tx_dropped;		/* no space available in linux   */
 	u64 collisions;		/* collisions while transmitting */
-} appldata_net_sum_data;
+} __attribute__((packed)) appldata_net_sum_data;
 
 
 static inline void appldata_print_debug(struct appldata_net_sum_data *net_data)
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index b83f074..e0a476b 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -49,7 +49,7 @@ struct appldata_os_per_cpu {
 	u32 per_cpu_softirq;	/* ... spent in softirqs            */
 	u32 per_cpu_iowait;	/* ... spent while waiting for I/O  */
 // <-- New in 2.6
-};
+} __attribute__((packed));
 
 struct appldata_os_data {
 	u64 timestamp;
@@ -75,7 +75,7 @@ struct appldata_os_data {
 
 	/* per cpu data */
 	struct appldata_os_per_cpu os_cpu[0];
-};
+} __attribute__((packed));
 
 static struct appldata_os_data *appldata_os_data;
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 2688936..06afa31 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -40,6 +40,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/unistd.h>
 
 #ifdef CONFIG_S390_SUPPORT
 #include "compat_ptrace.h"
@@ -130,13 +131,19 @@ static int
 peek_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset, tmp;
+	addr_t offset, tmp, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb reading
+		 * from acrs[15]. Result is a 64 bit value. Read the
+		 * 32 bit acrs[15] value and shift it by 32. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			tmp = ((unsigned long) child->thread.acrs[15]) << 32;
+		else
+#endif
 		tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
+		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+			tmp &= (unsigned long) FPC_VALID_MASK
+				<< (BITS_PER_LONG - 32);
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
@@ -191,13 +211,19 @@ static int
 poke_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset;
+	addr_t offset, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell indeed...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb writing
+		 * to acrs[15] with a 64 bit value. Ignore the lower
+		 * half of the value and write the upper 32 bit to
+		 * acrs[15]. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			child->thread.acrs[15] = (unsigned int) (data >> 32);
+		else
+#endif
 		*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * floating point regs. are stored in the thread structure
 		 */
 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
-		    (data & ~FPC_VALID_MASK) != 0)
+		    (data & ~((unsigned long) FPC_VALID_MASK
+			      << (BITS_PER_LONG - 32))) != 0)
 			return -EINVAL;
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
@@ -723,6 +761,13 @@ syscall_trace(struct pt_regs *regs, int entryexit)
 				 ? 0x80 : 0));
 
 	/*
+	 * If the debuffer has set an invalid system call number,
+	 * we prepare to skip the system call restart handling.
+	 */
+	if (!entryexit && regs->gprs[2] >= NR_syscalls)
+		regs->trap = -1;
+
+	/*
 	 * this isn't the same as continuing with a signal, but it will do
 	 * for normal use.  strace only continues with a signal if the
 	 * stopping signal is not SIGTRAP.  -brl
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 80306bc..75fde94 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
 	 * we are not in an interrupt and that there is a 
 	 * user context.
 	 */
-        if (user_address == 0 || in_interrupt() || !mm)
+        if (user_address == 0 || in_atomic() || !mm)
                 goto no_context;
 
 	/*
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 33ca56c..2803bc7 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -196,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long
 	return NULL;
 }
 
+static int iommu_alloc_ctx(struct pci_iommu *iommu)
+{
+	int lowest = iommu->ctx_lowest_free;
+	int sz = IOMMU_NUM_CTXS - lowest;
+	int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest);
+
+	if (unlikely(n == sz)) {
+		n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1);
+		if (unlikely(n == lowest)) {
+			printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
+			n = 0;
+		}
+	}
+	if (n)
+		__set_bit(n, iommu->ctx_bitmap);
+
+	return n;
+}
+
+static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
+{
+	if (likely(ctx)) {
+		__clear_bit(ctx, iommu->ctx_bitmap);
+		if (ctx < iommu->ctx_lowest_free)
+			iommu->ctx_lowest_free = ctx;
+	}
+}
+
 /* Allocate and map kernel buffer of size SIZE using consistent mode
  * DMA for PCI device PDEV.  Return non-NULL cpu-side address if
  * successful and set *DMA_ADDRP to the PCI side dma address.
@@ -236,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	npages = size >> IO_PAGE_SHIFT;
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 	first_page = __pa(first_page);
 	while (npages--) {
 		iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) |
@@ -317,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 		}
 	}
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	order = get_order(size);
@@ -360,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	base_paddr = __pa(oaddr & IO_PAGE_MASK);
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
@@ -380,39 +410,53 @@ bad:
 	return PCI_DMA_ERROR_CODE;
 }
 
-static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages)
+static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction)
 {
 	int limit;
 
-	PCI_STC_FLUSHFLAG_INIT(strbuf);
 	if (strbuf->strbuf_ctxflush &&
 	    iommu->iommu_ctxflush) {
 		unsigned long matchreg, flushreg;
+		u64 val;
 
 		flushreg = strbuf->strbuf_ctxflush;
 		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
 
-		limit = 100000;
 		pci_iommu_write(flushreg, ctx);
-		for(;;) {
-			if (((long)pci_iommu_read(matchreg)) >= 0L)
-				break;
-			limit--;
-			if (!limit)
-				break;
-			udelay(1);
+		val = pci_iommu_read(matchreg);
+		val &= 0xffff;
+		if (!val)
+			goto do_flush_sync;
+
+		while (val) {
+			if (val & 0x1)
+				pci_iommu_write(flushreg, ctx);
+			val >>= 1;
 		}
-		if (!limit)
+		val = pci_iommu_read(matchreg);
+		if (unlikely(val)) {
 			printk(KERN_WARNING "pci_strbuf_flush: ctx flush "
-			       "timeout vaddr[%08x] ctx[%lx]\n",
-			       vaddr, ctx);
+			       "timeout matchreg[%lx] ctx[%lx]\n",
+			       val, ctx);
+			goto do_page_flush;
+		}
 	} else {
 		unsigned long i;
 
+	do_page_flush:
 		for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
 			pci_iommu_write(strbuf->strbuf_pflush, vaddr);
 	}
 
+do_flush_sync:
+	/* If the device could not have possibly put dirty data into
+	 * the streaming cache, no flush-flag synchronization needs
+	 * to be performed.
+	 */
+	if (direction == PCI_DMA_TODEVICE)
+		return;
+
+	PCI_STC_FLUSHFLAG_INIT(strbuf);
 	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
 	(void) pci_iommu_read(iommu->write_complete_reg);
 
@@ -466,7 +510,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
 	if (strbuf->strbuf_enabled)
-		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -474,6 +518,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
 			       npages, ctx);
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -613,7 +659,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	/* Step 4: Choose a context if necessary. */
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 
 	/* Step 5: Create the mappings. */
 	if (strbuf->strbuf_enabled)
@@ -678,7 +724,7 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
 	if (strbuf->strbuf_enabled)
-		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -686,6 +732,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
 			       npages, ctx);
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -724,7 +772,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size
 	}
 
 	/* Step 2: Kick data out of streaming buffers. */
-	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
@@ -768,7 +816,7 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i
 	i--;
 	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
 		  - bus_addr) >> IO_PAGE_SHIFT;
-	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 3567fa8..534320e 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p)
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 5525d1e..53d333b 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p,
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index e93fcad..5753175 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses, SCHIZO has iommu ctx flushing. */
 	iommu->iommu_control  = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index 76ea645..89f5e01 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -117,17 +117,25 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages
 
 #define STRBUF_TAG_VALID	0x02UL
 
-static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction)
 {
 	unsigned long n;
 	int limit;
 
-	iommu->strbuf_flushflag = 0UL;
 	n = npages;
 	while (n--)
 		upa_writeq(base + (n << IO_PAGE_SHIFT),
 			   iommu->strbuf_regs + STRBUF_PFLUSH);
 
+	/* If the device could not have possibly put dirty data into
+	 * the streaming cache, no flush-flag synchronization needs
+	 * to be performed.
+	 */
+	if (direction == SBUS_DMA_TODEVICE)
+		return;
+
+	iommu->strbuf_flushflag = 0UL;
+
 	/* Whoopee cushion! */
 	upa_writeq(__pa(&iommu->strbuf_flushflag),
 		   iommu->strbuf_regs + STRBUF_FSYNC);
@@ -421,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size,
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
-	sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -584,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int
 	iommu = sdev->bus->iommu;
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
-	sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -596,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t
 	size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -620,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int
 	size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index d1dcd8e..5b77188 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y)
   fore_200e-objs		+= fore200e_pca_fw.o
   # guess the target endianess to choose the right PCA-200E firmware image
   ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
-    CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi)
+    byteorder.h			:= include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
+    CONFIG_ATM_FORE200E_PCA_FW	:= $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
   endif
 endif
 
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 9e65bfb..5f70219 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e)
     switch(fore200e->state) {
 
     case FORE200E_STATE_COMPLETE:
-	if (fore200e->stats)
-	    kfree(fore200e->stats);
+	kfree(fore200e->stats);
 
     case FORE200E_STATE_IRQ:
 	free_irq(fore200e->irq, fore200e->atm_dev);
@@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e)
 		entry, txq->tail, entry->vc_map, entry->skb);
 
 	/* free copy of misaligned data */
-	if (entry->data)
-	    kfree(entry->data);
+	kfree(entry->data);
 	
 	/* remove DMA mapping */
 	fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 3022c54..df2c83f 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 init_one_failure:
 	if (atm_dev)
 		atm_dev_deregister(atm_dev);
-	if (he_dev)
-		kfree(he_dev);
+	kfree(he_dev);
 	pci_disable_device(pci_dev);
 	return err;
 }
@@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc)
 open_failed:
 
 	if (err) {
-		if (he_vcc)
-			kfree(he_vcc);
+		kfree(he_vcc);
 		clear_bit(ATM_VF_ADDR, &vcc->flags);
 	}
 	else
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 85bf5c8..b2a7b75 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
    PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
       
    /* Initialize SCQ0, the only VBR SCQ used */
-   card->scq1 = (scq_info *) NULL;
-   card->scq2 = (scq_info *) NULL;
+   card->scq1 = NULL;
+   card->scq2 = NULL;
    card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
-   if (card->scq0 == (scq_info *) NULL)
+   if (card->scq0 == NULL)
    {
       printk("nicstar%d: can't get SCQ0.\n", i);
       error = 12;
@@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd)
    int i;
 
    if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
-      return (scq_info *) NULL;
+      return NULL;
 
    scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
-   if (scq == (scq_info *) NULL)
-      return (scq_info *) NULL;
+   if (scq == NULL)
+      return NULL;
    scq->org = kmalloc(2 * size, GFP_KERNEL);
    if (scq->org == NULL)
    {
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
                                           (size / NS_SCQE_SIZE), GFP_KERNEL);
-   if (scq->skb == (struct sk_buff **) NULL)
+   if (scq->skb == NULL)
    {
       kfree(scq->org);
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->num_entries = size / NS_SCQE_SIZE;
    scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc)
          vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
 
          scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
-         if (scq == (scq_info *) NULL)
+         if (scq == NULL)
          {
             PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
             card->scd2vc[frscdi] = NULL;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 47a8005..8d5e65c 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc)
 		zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
 		dealloc_shaper(vcc->dev,zatm_vcc->shaper);
 	}
-	if (zatm_vcc->ring) kfree(zatm_vcc->ring);
+	kfree(zatm_vcc->ring);
 }
 
 
@@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev)
 	return 0;
     out:
 	for (i = 0; i < NR_MBX; i++)
-		if (zatm_dev->mbx_start[i] != 0)
-			kfree((void *) zatm_dev->mbx_start[i]);
-	if (zatm_dev->rx_map != NULL)
-		kfree(zatm_dev->rx_map);
-	if (zatm_dev->tx_map != NULL)
-		kfree(zatm_dev->tx_map);
+		kfree(zatm_dev->mbx_start[i]);
+	kfree(zatm_dev->rx_map);
+	kfree(zatm_dev->tx_map);
 	free_irq(zatm_dev->irq, dev);
 	return error;
 }
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ce42889..adc4dcc 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,13 +8,12 @@
  * and is not licensed separately. See file COPYING for details.
  *
  * TODO (sorted by decreasing priority)
+ *  -- Kill first_open (Al Viro fixed the block layer now)
  *  -- Do resets with usb_device_reset (needs a thread context, use khubd)
  *  -- set readonly flag for CDs, set removable flag for CF readers
  *  -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- *  -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...)
  *  -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
  *  -- verify the 13 conditions and do bulk resets
- *  -- normal pool of commands instead of cmdv[]?
  *  -- kill last_pipe and simply do two-state clearing on both pipes
  *  -- verify protocol (bulk) from USB descriptors (maybe...)
  *  -- highmem and sg
@@ -49,7 +48,14 @@
 #define US_SC_SCSI	0x06		/* Transparent */
 
 /*
+ * This many LUNs per USB device.
+ * Every one of them takes a host, see UB_MAX_HOSTS.
  */
+#define UB_MAX_LUNS   4
+
+/*
+ */
+
 #define UB_MINORS_PER_MAJOR	8
 
 #define UB_MAX_CDB_SIZE      16		/* Corresponds to Bulk */
@@ -65,7 +71,7 @@ struct bulk_cb_wrap {
 	u32	Tag;			/* unique per command id */
 	__le32	DataTransferLength;	/* size of data */
 	u8	Flags;			/* direction in bit 0 */
-	u8	Lun;			/* LUN normally 0 */
+	u8	Lun;			/* LUN */
 	u8	Length;			/* of of the CDB */
 	u8	CDB[UB_MAX_CDB_SIZE];	/* max command */
 };
@@ -168,6 +174,7 @@ struct ub_scsi_cmd {
 	unsigned int len;		/* Requested length */
 	// struct scatterlist sgv[UB_MAX_REQ_SG];
 
+	struct ub_lun *lun;
 	void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
 	void *back;
 };
@@ -252,25 +259,47 @@ struct ub_scsi_cmd_queue {
 };
 
 /*
- * The UB device instance.
+ * The block device instance (one per LUN).
+ */
+struct ub_lun {
+	struct ub_dev *udev;
+	struct list_head link;
+	struct gendisk *disk;
+	int id;				/* Host index */
+	int num;			/* LUN number */
+	char name[16];
+
+	int changed;			/* Media was changed */
+	int removable;
+	int readonly;
+	int first_open;			/* Kludge. See ub_bd_open. */
+
+	/* Use Ingo's mempool if or when we have more than one command. */
+	/*
+	 * Currently we never need more than one command for the whole device.
+	 * However, giving every LUN a command is a cheap and automatic way
+	 * to enforce fairness between them.
+	 */
+	int cmda[1];
+	struct ub_scsi_cmd cmdv[1];
+
+	struct ub_capacity capacity; 
+};
+
+/*
+ * The USB device instance.
  */
 struct ub_dev {
 	spinlock_t lock;
-	int id;				/* Number among ub's */
 	atomic_t poison;		/* The USB device is disconnected */
 	int openc;			/* protected by ub_lock! */
 					/* kref is too implicit for our taste */
 	unsigned int tagcnt;
-	int changed;			/* Media was changed */
-	int removable;
-	int readonly;
-	int first_open;			/* Kludge. See ub_bd_open. */
-	char name[8];
+	char name[12];
 	struct usb_device *dev;
 	struct usb_interface *intf;
 
-	struct ub_capacity capacity; 
-	struct gendisk *disk;
+	struct list_head luns;
 
 	unsigned int send_bulk_pipe;	/* cached pipe values */
 	unsigned int recv_bulk_pipe;
@@ -279,10 +308,6 @@ struct ub_dev {
 
 	struct tasklet_struct tasklet;
 
-	/* XXX Use Ingo's mempool (once we have more than one) */
-	int cmda[1];
-	struct ub_scsi_cmd cmdv[1];
-
 	struct ub_scsi_cmd_queue cmd_queue;
 	struct ub_scsi_cmd top_rqs_cmd;	/* REQUEST SENSE */
 	unsigned char top_sense[UB_SENSE_SIZE];
@@ -301,9 +326,9 @@ struct ub_dev {
 /*
  */
 static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    struct request *rq);
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_scsi_cmd *cmd, struct request *rq);
 static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
     struct request *rq);
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -320,8 +345,10 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
     int stalled_pipe);
 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static int ub_sync_tur(struct ub_dev *sc);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret);
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_capacity *ret);
+static int ub_probe_lun(struct ub_dev *sc, int lnum);
 
 /*
  */
@@ -342,6 +369,7 @@ MODULE_DEVICE_TABLE(usb, ub_usb_ids);
  */
 #define UB_MAX_HOSTS  26
 static char ub_hostv[UB_MAX_HOSTS];
+
 static DEFINE_SPINLOCK(ub_lock);	/* Locks globals and ->openc */
 
 /*
@@ -406,6 +434,8 @@ static ssize_t ub_diag_show(struct device *dev, char *page)
 {
 	struct usb_interface *intf;
 	struct ub_dev *sc;
+	struct list_head *p;
+	struct ub_lun *lun;
 	int cnt;
 	unsigned long flags;
 	int nc, nh;
@@ -421,9 +451,15 @@ static ssize_t ub_diag_show(struct device *dev, char *page)
 	spin_lock_irqsave(&sc->lock, flags);
 
 	cnt += sprintf(page + cnt,
-	    "qlen %d qmax %d changed %d removable %d readonly %d\n",
-	    sc->cmd_queue.qlen, sc->cmd_queue.qmax,
-	    sc->changed, sc->removable, sc->readonly);
+	    "qlen %d qmax %d\n",
+	    sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+
+	list_for_each (p, &sc->luns) {
+		lun = list_entry(p, struct ub_lun, link);
+		cnt += sprintf(page + cnt,
+		    "lun %u changed %d removable %d readonly %d\n",
+		    lun->num, lun->changed, lun->removable, lun->readonly);
+	}
 
 	if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
 	for (j = 0; j < SCMD_TRACE_SZ; j++) {
@@ -523,53 +559,63 @@ static void ub_put(struct ub_dev *sc)
  */
 static void ub_cleanup(struct ub_dev *sc)
 {
+	struct list_head *p;
+	struct ub_lun *lun;
 	request_queue_t *q;
 
-	/* I don't think queue can be NULL. But... Stolen from sx8.c */
-	if ((q = sc->disk->queue) != NULL)
-		blk_cleanup_queue(q);
+	while (!list_empty(&sc->luns)) {
+		p = sc->luns.next;
+		lun = list_entry(p, struct ub_lun, link);
+		list_del(p);
 
-	/*
-	 * If we zero disk->private_data BEFORE put_disk, we have to check
-	 * for NULL all over the place in open, release, check_media and
-	 * revalidate, because the block level semaphore is well inside the
-	 * put_disk. But we cannot zero after the call, because *disk is gone.
-	 * The sd.c is blatantly racy in this area.
-	 */
-	/* disk->private_data = NULL; */
-	put_disk(sc->disk);
-	sc->disk = NULL;
+		/* I don't think queue can be NULL. But... Stolen from sx8.c */
+		if ((q = lun->disk->queue) != NULL)
+			blk_cleanup_queue(q);
+		/*
+		 * If we zero disk->private_data BEFORE put_disk, we have
+		 * to check for NULL all over the place in open, release,
+		 * check_media and revalidate, because the block level
+		 * semaphore is well inside the put_disk.
+		 * But we cannot zero after the call, because *disk is gone.
+		 * The sd.c is blatantly racy in this area.
+		 */
+		/* disk->private_data = NULL; */
+		put_disk(lun->disk);
+		lun->disk = NULL;
+
+		ub_id_put(lun->id);
+		kfree(lun);
+	}
 
-	ub_id_put(sc->id);
 	kfree(sc);
 }
 
 /*
  * The "command allocator".
  */
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc)
+static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
 {
 	struct ub_scsi_cmd *ret;
 
-	if (sc->cmda[0])
+	if (lun->cmda[0])
 		return NULL;
-	ret = &sc->cmdv[0];
-	sc->cmda[0] = 1;
+	ret = &lun->cmdv[0];
+	lun->cmda[0] = 1;
 	return ret;
 }
 
-static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
 {
-	if (cmd != &sc->cmdv[0]) {
+	if (cmd != &lun->cmdv[0]) {
 		printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
-		    sc->name, cmd);
+		    lun->name, cmd);
 		return;
 	}
-	if (!sc->cmda[0]) {
-		printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name);
+	if (!lun->cmda[0]) {
+		printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
 		return;
 	}
-	sc->cmda[0] = 0;
+	lun->cmda[0] = 0;
 }
 
 /*
@@ -630,29 +676,30 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
 
 static void ub_bd_rq_fn(request_queue_t *q)
 {
-	struct ub_dev *sc = q->queuedata;
+	struct ub_lun *lun = q->queuedata;
 	struct request *rq;
 
 	while ((rq = elv_next_request(q)) != NULL) {
-		if (ub_bd_rq_fn_1(sc, rq) != 0) {
+		if (ub_bd_rq_fn_1(lun, rq) != 0) {
 			blk_stop_queue(q);
 			break;
 		}
 	}
 }
 
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
 {
+	struct ub_dev *sc = lun->udev;
 	struct ub_scsi_cmd *cmd;
 	int rc;
 
-	if (atomic_read(&sc->poison) || sc->changed) {
+	if (atomic_read(&sc->poison) || lun->changed) {
 		blkdev_dequeue_request(rq);
 		ub_end_rq(rq, 0);
 		return 0;
 	}
 
-	if ((cmd = ub_get_cmd(sc)) == NULL)
+	if ((cmd = ub_get_cmd(lun)) == NULL)
 		return -1;
 	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
 
@@ -661,32 +708,30 @@ static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
 	if (blk_pc_request(rq)) {
 		rc = ub_cmd_build_packet(sc, cmd, rq);
 	} else {
-		rc = ub_cmd_build_block(sc, cmd, rq);
+		rc = ub_cmd_build_block(sc, lun, cmd, rq);
 	}
 	if (rc != 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
-		blk_start_queue(sc->disk->queue);
 		return 0;
 	}
-
 	cmd->state = UB_CMDST_INIT;
+	cmd->lun = lun;
 	cmd->done = ub_rw_cmd_done;
 	cmd->back = rq;
 
 	cmd->tag = sc->tagcnt++;
 	if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
-		blk_start_queue(sc->disk->queue);
 		return 0;
 	}
 
 	return 0;
 }
 
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    struct request *rq)
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_scsi_cmd *cmd, struct request *rq)
 {
 	int ub_dir;
 #if 0 /* We use rq->buffer for now */
@@ -707,7 +752,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	sg = &cmd->sgv[0];
 	n_elem = blk_rq_map_sg(q, rq, sg);
 	if (n_elem <= 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
 		blk_start_queue(q);
 		return 0;		/* request with no s/g entries? */
@@ -716,7 +761,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	if (n_elem != 1) {		/* Paranoia */
 		printk(KERN_WARNING "%s: request with %d segments\n",
 		    sc->name, n_elem);
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
 		blk_start_queue(q);
 		return 0;
@@ -748,8 +793,8 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	 * The call to blk_queue_hardsect_size() guarantees that request
 	 * is aligned, but it is given in terms of 512 byte units, always.
 	 */
-	block = rq->sector >> sc->capacity.bshift;
-	nblks = rq->nr_sectors >> sc->capacity.bshift;
+	block = rq->sector >> lun->capacity.bshift;
+	nblks = rq->nr_sectors >> lun->capacity.bshift;
 
 	cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
 	/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -803,7 +848,8 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 {
 	struct request *rq = cmd->back;
-	struct gendisk *disk = sc->disk;
+	struct ub_lun *lun = cmd->lun;
+	struct gendisk *disk = lun->disk;
 	request_queue_t *q = disk->queue;
 	int uptodate;
 
@@ -818,7 +864,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	else
 		uptodate = 0;
 
-	ub_put_cmd(sc, cmd);
+	ub_put_cmd(lun, cmd);
 	ub_end_rq(rq, uptodate);
 	blk_start_queue(q);
 }
@@ -887,7 +933,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	bcb->Tag = cmd->tag;		/* Endianness is not important */
 	bcb->DataTransferLength = cpu_to_le32(cmd->len);
 	bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
-	bcb->Lun = 0;			/* No multi-LUN yet */
+	bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
 	bcb->Length = cmd->cdb_len;
 
 	/* copy the command payload */
@@ -1002,9 +1048,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * The control pipe clears itself - nothing to do.
 			 * XXX Might try to reset the device here and retry.
 			 */
-			printk(KERN_NOTICE "%s: "
-			    "stall on control pipe for device %u\n",
-			    sc->name, sc->dev->devnum);
+			printk(KERN_NOTICE "%s: stall on control pipe\n",
+			    sc->name);
 			goto Bad_End;
 		}
 
@@ -1025,9 +1070,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * The control pipe clears itself - nothing to do.
 			 * XXX Might try to reset the device here and retry.
 			 */
-			printk(KERN_NOTICE "%s: "
-			    "stall on control pipe for device %u\n",
-			    sc->name, sc->dev->devnum);
+			printk(KERN_NOTICE "%s: stall on control pipe\n",
+			    sc->name);
 			goto Bad_End;
 		}
 
@@ -1046,9 +1090,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1107,9 +1150,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1140,9 +1182,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1164,9 +1205,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * encounter such a thing, try to read the CSW again.
 			 */
 			if (++cmd->stat_count >= 4) {
-				printk(KERN_NOTICE "%s: "
-				    "unable to get CSW on device %u\n",
-				    sc->name, sc->dev->devnum);
+				printk(KERN_NOTICE "%s: unable to get CSW\n",
+				    sc->name);
 				goto Bad_End;
 			}
 			__ub_state_stat(sc, cmd);
@@ -1207,10 +1247,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 */
 			if (++cmd->stat_count >= 4) {
 				printk(KERN_NOTICE "%s: "
-				    "tag mismatch orig 0x%x reply 0x%x "
-				    "on device %u\n",
-				    sc->name, cmd->tag, bcs->Tag,
-				    sc->dev->devnum);
+				    "tag mismatch orig 0x%x reply 0x%x\n",
+				    sc->name, cmd->tag, bcs->Tag);
 				goto Bad_End;
 			}
 			__ub_state_stat(sc, cmd);
@@ -1244,8 +1282,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	} else {
 		printk(KERN_WARNING "%s: "
-		    "wrong command state %d on device %u\n",
-		    sc->name, cmd->state, sc->dev->devnum);
+		    "wrong command state %d\n",
+		    sc->name, cmd->state);
 		goto Bad_End;
 	}
 	return;
@@ -1288,7 +1326,6 @@ static void __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		ub_state_done(sc, cmd, rc);
 		return;
@@ -1333,6 +1370,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	scmd->state = UB_CMDST_INIT;
 	scmd->data = sc->top_sense;
 	scmd->len = UB_SENSE_SIZE;
+	scmd->lun = cmd->lun;
 	scmd->done = ub_top_sense_done;
 	scmd->back = cmd;
 
@@ -1411,14 +1449,14 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 	}
 	if (cmd != scmd->back) {
 		printk(KERN_WARNING "%s: "
-		    "sense done for wrong command 0x%x on device %u\n",
-		    sc->name, cmd->tag, sc->dev->devnum);
+		    "sense done for wrong command 0x%x\n",
+		    sc->name, cmd->tag);
 		return;
 	}
 	if (cmd->state != UB_CMDST_SENSE) {
 		printk(KERN_WARNING "%s: "
-		    "sense done with bad cmd state %d on device %u\n",
-		    sc->name, cmd->state, sc->dev->devnum);
+		    "sense done with bad cmd state %d\n",
+		    sc->name, cmd->state);
 		return;
 	}
 
@@ -1429,68 +1467,32 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 	ub_scsi_urb_compl(sc, cmd);
 }
 
-#if 0
-/* Determine what the maximum LUN supported is */
-int usb_stor_Bulk_max_lun(struct us_data *us)
-{
-	int result;
-
-	/* issue the command */
-	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
-				 US_BULK_GET_MAX_LUN, 
-				 USB_DIR_IN | USB_TYPE_CLASS | 
-				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, HZ);
-
-	/* 
-	 * Some devices (i.e. Iomega Zip100) need this -- apparently
-	 * the bulk pipes get STALLed when the GetMaxLUN request is
-	 * processed.   This is, in theory, harmless to all other devices
-	 * (regardless of if they stall or not).
-	 */
-	if (result < 0) {
-		usb_stor_clear_halt(us, us->recv_bulk_pipe);
-		usb_stor_clear_halt(us, us->send_bulk_pipe);
-	}
-
-	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
-		  result, us->iobuf[0]);
-
-	/* if we have a successful request, return the result */
-	if (result == 1)
-		return us->iobuf[0];
-
-	/* return the default -- no LUNs */
-	return 0;
-}
-#endif
-
 /*
  * This is called from a process context.
  */
-static void ub_revalidate(struct ub_dev *sc)
+static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
 {
 
-	sc->readonly = 0;	/* XXX Query this from the device */
+	lun->readonly = 0;	/* XXX Query this from the device */
 
-	sc->capacity.nsec = 0;
-	sc->capacity.bsize = 512;
-	sc->capacity.bshift = 0;
+	lun->capacity.nsec = 0;
+	lun->capacity.bsize = 512;
+	lun->capacity.bshift = 0;
 
-	if (ub_sync_tur(sc) != 0)
+	if (ub_sync_tur(sc, lun) != 0)
 		return;			/* Not ready */
-	sc->changed = 0;
+	lun->changed = 0;
 
-	if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
+	if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
 		/*
 		 * The retry here means something is wrong, either with the
 		 * device, with the transport, or with our code.
 		 * We keep this because sd.c has retries for capacity.
 		 */
-		if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
-			sc->capacity.nsec = 0;
-			sc->capacity.bsize = 512;
-			sc->capacity.bshift = 0;
+		if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
+			lun->capacity.nsec = 0;
+			lun->capacity.bsize = 512;
+			lun->capacity.bshift = 0;
 		}
 	}
 }
@@ -1503,12 +1505,15 @@ static void ub_revalidate(struct ub_dev *sc)
 static int ub_bd_open(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ub_lun *lun;
 	struct ub_dev *sc;
 	unsigned long flags;
 	int rc;
 
-	if ((sc = disk->private_data) == NULL)
+	if ((lun = disk->private_data) == NULL)
 		return -ENXIO;
+	sc = lun->udev;
+
 	spin_lock_irqsave(&ub_lock, flags);
 	if (atomic_read(&sc->poison)) {
 		spin_unlock_irqrestore(&ub_lock, flags);
@@ -1529,15 +1534,15 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
 	 * The bottom line is, Al Viro says that we should not allow
 	 * bdev->bd_invalidated to be set when doing add_disk no matter what.
 	 */
-	if (sc->first_open) {
-		if (sc->changed) {
-			sc->first_open = 0;
+	if (lun->first_open) {
+		lun->first_open = 0;
+		if (lun->changed) {
 			rc = -ENOMEDIUM;
 			goto err_open;
 		}
 	}
 
-	if (sc->removable || sc->readonly)
+	if (lun->removable || lun->readonly)
 		check_disk_change(inode->i_bdev);
 
 	/*
@@ -1545,12 +1550,12 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
 	 * under some pretty murky conditions (a failure of READ CAPACITY).
 	 * We may need it one day.
 	 */
-	if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) {
+	if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
 		rc = -ENOMEDIUM;
 		goto err_open;
 	}
 
-	if (sc->readonly && (filp->f_mode & FMODE_WRITE)) {
+	if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
 		rc = -EROFS;
 		goto err_open;
 	}
@@ -1567,7 +1572,8 @@ err_open:
 static int ub_bd_release(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ub_dev *sc = disk->private_data;
+	struct ub_lun *lun = disk->private_data;
+	struct ub_dev *sc = lun->udev;
 
 	ub_put(sc);
 	return 0;
@@ -1597,20 +1603,14 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp,
  */
 static int ub_bd_revalidate(struct gendisk *disk)
 {
-	struct ub_dev *sc = disk->private_data;
-
-	ub_revalidate(sc);
-	/* This is pretty much a long term P3 */
-	if (!atomic_read(&sc->poison)) {		/* Cover sc->dev */
-		printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
-		    sc->name, sc->dev->devnum,
-		    sc->capacity.nsec, sc->capacity.bsize);
-	}
+	struct ub_lun *lun = disk->private_data;
+
+	ub_revalidate(lun->udev, lun);
 
 	/* XXX Support sector size switching like in sr.c */
-	blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);
-	set_capacity(disk, sc->capacity.nsec);
-	// set_disk_ro(sdkp->disk, sc->readonly);
+	blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+	set_capacity(disk, lun->capacity.nsec);
+	// set_disk_ro(sdkp->disk, lun->readonly);
 
 	return 0;
 }
@@ -1626,9 +1626,9 @@ static int ub_bd_revalidate(struct gendisk *disk)
  */
 static int ub_bd_media_changed(struct gendisk *disk)
 {
-	struct ub_dev *sc = disk->private_data;
+	struct ub_lun *lun = disk->private_data;
 
-	if (!sc->removable)
+	if (!lun->removable)
 		return 0;
 
 	/*
@@ -1640,12 +1640,12 @@ static int ub_bd_media_changed(struct gendisk *disk)
 	 * will fail, then block layer discards the data. Since we never
 	 * spin drives up, such devices simply cannot be used with ub anyway.
 	 */
-	if (ub_sync_tur(sc) != 0) {
-		sc->changed = 1;
+	if (ub_sync_tur(lun->udev, lun) != 0) {
+		lun->changed = 1;
 		return 1;
 	}
 
-	return sc->changed;
+	return lun->changed;
 }
 
 static struct block_device_operations ub_bd_fops = {
@@ -1669,7 +1669,7 @@ static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 /*
  * Test if the device has a check condition on it, synchronously.
  */
-static int ub_sync_tur(struct ub_dev *sc)
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
 {
 	struct ub_scsi_cmd *cmd;
 	enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
@@ -1688,6 +1688,7 @@ static int ub_sync_tur(struct ub_dev *sc)
 	cmd->cdb_len = 6;
 	cmd->dir = UB_DIR_NONE;
 	cmd->state = UB_CMDST_INIT;
+	cmd->lun = lun;			/* This may be NULL, but that's ok */
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
@@ -1718,7 +1719,8 @@ err_alloc:
 /*
  * Read the SCSI capacity synchronously (for probing).
  */
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_capacity *ret)
 {
 	struct ub_scsi_cmd *cmd;
 	char *p;
@@ -1743,6 +1745,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
 	cmd->state = UB_CMDST_INIT;
 	cmd->data = p;
 	cmd->len = 8;
+	cmd->lun = lun;
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
@@ -1812,6 +1815,90 @@ static void ub_probe_timeout(unsigned long arg)
 }
 
 /*
+ * Get number of LUNs by the way of Bulk GetMaxLUN command.
+ */
+static int ub_sync_getmaxlun(struct ub_dev *sc)
+{
+	int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+	unsigned char *p;
+	enum { ALLOC_SIZE = 1 };
+	struct usb_ctrlrequest *cr;
+	struct completion compl;
+	struct timer_list timer;
+	int nluns;
+	int rc;
+
+	init_completion(&compl);
+
+	rc = -ENOMEM;
+	if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+		goto err_alloc;
+	*p = 55;
+
+	cr = &sc->work_cr;
+	cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	cr->bRequest = US_BULK_GET_MAX_LUN;
+	cr->wValue = cpu_to_le16(0);
+	cr->wIndex = cpu_to_le16(ifnum);
+	cr->wLength = cpu_to_le16(1);
+
+	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
+	    (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
+	sc->work_urb.transfer_flags = 0;
+	sc->work_urb.actual_length = 0;
+	sc->work_urb.error_count = 0;
+	sc->work_urb.status = 0;
+
+	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+		if (rc == -EPIPE) {
+			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			     sc->name); /* P3 */
+		} else {
+			printk(KERN_WARNING
+			     "%s: Unable to submit GetMaxLUN (%d)\n",
+			     sc->name, rc);
+		}
+		goto err_submit;
+	}
+
+	init_timer(&timer);
+	timer.function = ub_probe_timeout;
+	timer.data = (unsigned long) &compl;
+	timer.expires = jiffies + UB_CTRL_TIMEOUT;
+	add_timer(&timer);
+
+	wait_for_completion(&compl);
+
+	del_timer_sync(&timer);
+	usb_kill_urb(&sc->work_urb);
+
+	if (sc->work_urb.actual_length != 1) {
+		printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
+		    sc->work_urb.actual_length); /* P3 */
+		nluns = 0;
+	} else {
+		if ((nluns = *p) == 55) {
+			nluns = 0;
+		} else {
+  			/* GetMaxLUN returns the maximum LUN number */
+			nluns += 1;
+			if (nluns > UB_MAX_LUNS)
+				nluns = UB_MAX_LUNS;
+		}
+		printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
+		    *p, nluns); /* P3 */
+	}
+
+	kfree(p);
+	return nluns;
+
+err_submit:
+	kfree(p);
+err_alloc:
+	return rc;
+}
+
+/*
  * Clear initial stalls.
  */
 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
@@ -1897,8 +1984,8 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
 	}
 
 	if (ep_in == NULL || ep_out == NULL) {
-		printk(KERN_NOTICE "%s: device %u failed endpoint check\n",
-		    sc->name, sc->dev->devnum);
+		printk(KERN_NOTICE "%s: failed endpoint check\n",
+		    sc->name);
 		return -EIO;
 	}
 
@@ -1921,8 +2008,7 @@ static int ub_probe(struct usb_interface *intf,
     const struct usb_device_id *dev_id)
 {
 	struct ub_dev *sc;
-	request_queue_t *q;
-	struct gendisk *disk;
+	int nluns;
 	int rc;
 	int i;
 
@@ -1931,6 +2017,7 @@ static int ub_probe(struct usb_interface *intf,
 		goto err_core;
 	memset(sc, 0, sizeof(struct ub_dev));
 	spin_lock_init(&sc->lock);
+	INIT_LIST_HEAD(&sc->luns);
 	usb_init_urb(&sc->work_urb);
 	tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
 	atomic_set(&sc->poison, 0);
@@ -1942,19 +2029,16 @@ static int ub_probe(struct usb_interface *intf,
 	ub_init_completion(&sc->work_done);
 	sc->work_done.done = 1;		/* A little yuk, but oh well... */
 
-	rc = -ENOSR;
-	if ((sc->id = ub_id_get()) == -1)
-		goto err_id;
-	snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a');
-
 	sc->dev = interface_to_usbdev(intf);
 	sc->intf = intf;
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
 	// usb_get_intf(sc->intf);	/* Do we need this? */
 
+	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
+	    sc->dev->bus->busnum, sc->dev->devnum);
+
 	/* XXX Verify that we can handle the device (from descriptors) */
 
 	ub_get_pipes(sc, sc->dev, intf);
@@ -1992,35 +2076,88 @@ static int ub_probe(struct usb_interface *intf,
 	 * In any case it's not our business how revaliadation is implemented.
 	 */
 	for (i = 0; i < 3; i++) {	/* Retries for benh's key */
-		if ((rc = ub_sync_tur(sc)) <= 0) break;
+		if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
 		if (rc != 0x6) break;
 		msleep(10);
 	}
 
-	sc->removable = 1;		/* XXX Query this from the device */
-	sc->changed = 1;		/* ub_revalidate clears only */
-	sc->first_open = 1;
+	nluns = 1;
+	for (i = 0; i < 3; i++) {
+		if ((rc = ub_sync_getmaxlun(sc)) < 0) {
+			/* 
+			 * Some devices (i.e. Iomega Zip100) need this --
+			 * apparently the bulk pipes get STALLed when the
+			 * GetMaxLUN request is processed.
+			 * XXX I have a ZIP-100, verify it does this.
+			 */
+			if (rc == -EPIPE) {
+				ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+				ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+			}
+			break;
+		}
+		if (rc != 0) {
+			nluns = rc;
+			break;
+		}
+		mdelay(100);
+	}
 
-	ub_revalidate(sc);
-	/* This is pretty much a long term P3 */
-	printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
-	    sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+	for (i = 0; i < nluns; i++) {
+		ub_probe_lun(sc, i);
+	}
+	return 0;
+
+	/* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
+err_diag:
+	usb_set_intfdata(intf, NULL);
+	// usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
+	kfree(sc);
+err_core:
+	return rc;
+}
+
+static int ub_probe_lun(struct ub_dev *sc, int lnum)
+{
+	struct ub_lun *lun;
+	request_queue_t *q;
+	struct gendisk *disk;
+	int rc;
+
+	rc = -ENOMEM;
+	if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+		goto err_alloc;
+	memset(lun, 0, sizeof(struct ub_lun));
+	lun->num = lnum;
+
+	rc = -ENOSR;
+	if ((lun->id = ub_id_get()) == -1)
+		goto err_id;
+
+	lun->udev = sc;
+	list_add(&lun->link, &sc->luns);
+
+	snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
+	    lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
+
+	lun->removable = 1;		/* XXX Query this from the device */
+	lun->changed = 1;		/* ub_revalidate clears only */
+	lun->first_open = 1;
+	ub_revalidate(sc, lun);
 
-	/*
-	 * Just one disk per sc currently, but maybe more.
-	 */
 	rc = -ENOMEM;
 	if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL)
 		goto err_diskalloc;
 
-	sc->disk = disk;
-	sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a');
-	sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a');
+	lun->disk = disk;
+	sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
+	sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
 	disk->major = UB_MAJOR;
-	disk->first_minor = sc->id * UB_MINORS_PER_MAJOR;
+	disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
 	disk->fops = &ub_bd_fops;
-	disk->private_data = sc;
-	disk->driverfs_dev = &intf->dev;
+	disk->private_data = lun;
+	disk->driverfs_dev = &sc->intf->dev;	/* XXX Many to one ok? */
 
 	rc = -ENOMEM;
 	if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
@@ -2028,28 +2165,17 @@ static int ub_probe(struct usb_interface *intf,
 
 	disk->queue = q;
 
-        // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
 	blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
 	blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
-	// blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
+	blk_queue_segment_boundary(q, 0xffffffff);	/* Dubious. */
 	blk_queue_max_sectors(q, UB_MAX_SECTORS);
-	blk_queue_hardsect_size(q, sc->capacity.bsize);
-
-	/*
-	 * This is a serious infraction, caused by a deficiency in the
-	 * USB sg interface (usb_sg_wait()). We plan to remove this once
-	 * we get mileage on the driver and can justify a change to USB API.
-	 * See blk_queue_bounce_limit() to understand this part.
-	 *
-	 * XXX And I still need to be aware of the DMA mask in the HC.
-	 */
-	q->bounce_pfn = blk_max_low_pfn;
-	q->bounce_gfp = GFP_NOIO;
+	blk_queue_hardsect_size(q, lun->capacity.bsize);
 
-	q->queuedata = sc;
+	q->queuedata = lun;
 
-	set_capacity(disk, sc->capacity.nsec);
-	if (sc->removable)
+	set_capacity(disk, lun->capacity.nsec);
+	if (lun->removable)
 		disk->flags |= GENHD_FL_REMOVABLE;
 
 	add_disk(disk);
@@ -2059,22 +2185,20 @@ static int ub_probe(struct usb_interface *intf,
 err_blkqinit:
 	put_disk(disk);
 err_diskalloc:
-	device_remove_file(&sc->intf->dev, &dev_attr_diag);
-err_diag:
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	usb_put_dev(sc->dev);
-	ub_id_put(sc->id);
+	list_del(&lun->link);
+	ub_id_put(lun->id);
 err_id:
-	kfree(sc);
-err_core:
+	kfree(lun);
+err_alloc:
 	return rc;
 }
 
 static void ub_disconnect(struct usb_interface *intf)
 {
 	struct ub_dev *sc = usb_get_intfdata(intf);
-	struct gendisk *disk = sc->disk;
+	struct list_head *p;
+	struct ub_lun *lun;
+	struct gendisk *disk;
 	unsigned long flags;
 
 	/*
@@ -2124,14 +2248,18 @@ static void ub_disconnect(struct usb_interface *intf)
 	/*
 	 * Unregister the upper layer.
 	 */
-	if (disk->flags & GENHD_FL_UP)
-		del_gendisk(disk);
-	/*
-	 * I wish I could do:
-	 *    set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
-	 * As it is, we rely on our internal poisoning and let
-	 * the upper levels to spin furiously failing all the I/O.
-	 */
+	list_for_each (p, &sc->luns) {
+		lun = list_entry(p, struct ub_lun, link);
+		disk = lun->disk;
+		if (disk->flags & GENHD_FL_UP)
+			del_gendisk(disk);
+		/*
+		 * I wish I could do:
+		 *    set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
+		 * As it is, we rely on our internal poisoning and let
+		 * the upper levels to spin furiously failing all the I/O.
+		 */
+	}
 
 	/*
 	 * Taking a lock on a structure which is about to be freed
@@ -2182,8 +2310,8 @@ static int __init ub_init(void)
 {
 	int rc;
 
-	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n",
-			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev));
+	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
+			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
 
 	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
 		goto err_regblkdev;
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 3571081..fdd881a 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -2,6 +2,7 @@
  *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
  *
  *	Copyright (C) 2004 Patrick Mochel
+ *		      2005 Rudolf Marek <r.marek@sh.cvut.cz>
  *
  *	The 1563 southbridge is deceptively similar to the 1533, with a
  *	few notable exceptions. One of those happens to be the fact they
@@ -57,10 +58,11 @@
 #define HST_CNTL2_BLOCK		0x05
 
 
+#define HST_CNTL2_SIZEMASK	0x38
 
 static unsigned short ali1563_smba;
 
-static int ali1563_transaction(struct i2c_adapter * a)
+static int ali1563_transaction(struct i2c_adapter * a, int size)
 {
 	u32 data;
 	int timeout;
@@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	data = inb_p(SMB_HST_STS);
 	if (data & HST_STS_BAD) {
-		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
 		outb_p(data | HST_STS_BAD,SMB_HST_STS);
 		data = inb_p(SMB_HST_STS);
 		if (data & HST_STS_BAD)
@@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
-		timeout ? "Timeout " : "",
-		data & HST_STS_FAIL ? "Transaction Failed " : "",
-		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
-		data & HST_STS_DEVERR ? "Device Error " : "",
-		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
 
-	if (!(data & HST_STS_DONE))
+	if (!timeout) {
+		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
 		/* Issue 'kill' to host controller */
 		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
-	else
-		/* Issue timeout to reset all devices on bus */
+		data = inb_p(SMB_HST_STS);
+ 	}
+
+	/* device error - no response, ignore the autodetection case */
+	if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
+		dev_err(&a->dev, "Device error!\n");
+	}
+
+	/* bus collision */
+	if (data & HST_STS_BUSERR) {
+		dev_err(&a->dev, "Bus collision!\n");
+		/* Issue timeout, hoping it helps */
 		outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+	}
+
+	if (data & HST_STS_FAIL) {
+		dev_err(&a->dev, "Cleaning fail after KILL!\n");
+		outb_p(0x0,SMB_HST_CNTL2);
+	}
+
 	return -1;
 }
 
@@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
 		timeout ? "Timeout " : "",
 		data & HST_STS_FAIL ? "Transaction Failed " : "",
 		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
@@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
-	outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
 
 	/* Write the command register */
+
 	switch(size) {
 	case HST_CNTL2_BYTE:
 		if (rw== I2C_SMBUS_WRITE)
-			outb_p(cmd, SMB_HST_CMD);
+			/* Beware it uses DAT0 register and not CMD! */
+			outb_p(cmd, SMB_HST_DAT0);
 		break;
 	case HST_CNTL2_BYTE_DATA:
 		outb_p(cmd, SMB_HST_CMD);
@@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 		goto Done;
 	}
 
-	if ((error = ali1563_transaction(a)))
+	if ((error = ali1563_transaction(a, size)))
 		goto Done;
 
 	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 47225e3..4e0f13d 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -72,6 +72,7 @@ static struct amd_ide_chip {
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	0x50, AMD_UDMA_133 },
 	{ 0 }
 };
 
@@ -487,6 +488,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
 	/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
 	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
 	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
+	/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -521,6 +523,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = {
 #endif
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1c563f9..a7f15d9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc,
 }
 
 /* --------------------------------------------------------------------- */
-/*
- * high performance HDLC encoder
- * yes, it's ugly, but generates pretty good code
- */
-
-#define ENCODEITERA(j)                         \
-({                                             \
-        if (!(notbitstream & (0x1f0 << j)))    \
-                goto stuff##j;                 \
-  encodeend##j:    	;                      \
-})
-
-#define ENCODEITERB(j)                                          \
-({                                                              \
-  stuff##j:                                                     \
-        bitstream &= ~(0x100 << j);                             \
-        bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |        \
-                ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);  \
-        numbit++;                                               \
-        notbitstream = ~bitstream;                              \
-        goto encodeend##j;                                      \
-})
-
 
 static void encode_hdlc(struct baycom_state *bc)
 {
@@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc)
 	int pkt_len;
         unsigned bitstream, notbitstream, bitbuf, numbit, crc;
 	unsigned char crcarr[2];
+	int j;
 	
 	if (bc->hdlctx.bufcnt > 0)
 		return;
@@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc)
 		pkt_len--;
 		if (!pkt_len)
 			bp = crcarr;
-		ENCODEITERA(0);
-		ENCODEITERA(1);
-		ENCODEITERA(2);
-		ENCODEITERA(3);
-		ENCODEITERA(4);
-		ENCODEITERA(5);
-		ENCODEITERA(6);
-		ENCODEITERA(7);
-		goto enditer;
-		ENCODEITERB(0);
-		ENCODEITERB(1);
-		ENCODEITERB(2);
-		ENCODEITERB(3);
-		ENCODEITERB(4);
-		ENCODEITERB(5);
-		ENCODEITERB(6);
-		ENCODEITERB(7);
-	enditer:
+		for (j = 0; j < 8; j++)
+			if (unlikely(!(notbitstream & (0x1f0 << j)))) {
+				bitstream &= ~(0x100 << j);
+ 				bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
+					((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
+				numbit++;
+				notbitstream = ~bitstream;
+			}
 		numbit += 8;
 		while (numbit >= 8) {
 			*wp++ = bitbuf;
@@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev)
 	bc->stats.rx_packets++;
 }
 
-#define DECODEITERA(j)                                                        \
-({                                                                            \
-        if (!(notbitstream & (0x0fc << j)))              /* flag or abort */  \
-                goto flgabrt##j;                                              \
-        if ((bitstream & (0x1f8 << j)) == (0xf8 << j))   /* stuffed bit */    \
-                goto stuff##j;                                                \
-  enditer##j:      ;                                                           \
-})
-
-#define DECODEITERB(j)                                                                 \
-({                                                                                     \
-  flgabrt##j:                                                                          \
-        if (!(notbitstream & (0x1fc << j))) {              /* abort received */        \
-                state = 0;                                                             \
-                goto enditer##j;                                                       \
-        }                                                                              \
-        if ((bitstream & (0x1fe << j)) != (0x0fc << j))   /* flag received */          \
-                goto enditer##j;                                                       \
-        if (state)                                                                     \
-                do_rxpacket(dev);                                                      \
-        bc->hdlcrx.bufcnt = 0;                                                         \
-        bc->hdlcrx.bufptr = bc->hdlcrx.buf;                                            \
-        state = 1;                                                                     \
-        numbits = 7-j;                                                                 \
-        goto enditer##j;                                                               \
-  stuff##j:                                                                            \
-        numbits--;                                                                     \
-        bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);        \
-        goto enditer##j;                                                               \
-})
-        
 static int receive(struct net_device *dev, int cnt)
 {
 	struct baycom_state *bc = netdev_priv(dev);
@@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt)
 	unsigned char tmp[128];
         unsigned char *cp;
 	int cnt2, ret = 0;
+	int j;
         
         numbits = bc->hdlcrx.numbits;
 	state = bc->hdlcrx.state;
@@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt)
 			bitbuf |= (*cp) << 8;
 			numbits += 8;
 			notbitstream = ~bitstream;
-			DECODEITERA(0);
-			DECODEITERA(1);
-			DECODEITERA(2);
-			DECODEITERA(3);
-			DECODEITERA(4);
-			DECODEITERA(5);
-			DECODEITERA(6);
-			DECODEITERA(7);
-			goto enddec;
-			DECODEITERB(0);
-			DECODEITERB(1);
-			DECODEITERB(2);
-			DECODEITERB(3);
-			DECODEITERB(4);
-			DECODEITERB(5);
-			DECODEITERB(6);
-			DECODEITERB(7);
-		enddec:
+			for (j = 0; j < 8; j++) {
+
+				/* flag or abort */
+			        if (unlikely(!(notbitstream & (0x0fc << j)))) {
+
+					/* abort received */
+					if (!(notbitstream & (0x1fc << j)))
+						state = 0;
+
+					/* not flag received */
+					else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+						if (state)
+							do_rxpacket(dev);
+						bc->hdlcrx.bufcnt = 0;
+						bc->hdlcrx.bufptr = bc->hdlcrx.buf;
+						state = 1;
+						numbits = 7-j;
+						}
+					}
+
+				/* stuffed bit */
+				else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
+					numbits--;
+					bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
+					}
+				}
 			while (state && numbits >= 8) {
 				if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
 					state = 0;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 41e51711..c6e8b25f 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev)
 		spin_lock_irqsave(&lp->window_lock, flags);
 		update_stats(dev);
 		spin_unlock_irqrestore(&lp->window_lock, flags);
+
+		/* force interrupts off */
+		outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
 	}
 
 	link->open--;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c59507f..b3768d8 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev)
 	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	/* For gigabit rtl8169, MTU + header + CRC + VLAN */
-	RTL_W16(RxMaxSize, tp->rx_buf_sz);
+	/* Low hurts. Let's disable the filtering. */
+	RTL_W16(RxMaxSize, 16383);
 
 	/* Set Rx Config register */
 	i = rtl8169_rx_config |
@@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 	}
 }
 
+static inline int rtl8169_fragmented_frame(u32 status)
+{
+	return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
+}
+
 static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
 {
 	u32 opts1 = le32_to_cpu(desc->opts1);
@@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 
 	while (rx_left > 0) {
 		unsigned int entry = cur_rx % NUM_RX_DESC;
+		struct RxDesc *desc = tp->RxDescArray + entry;
 		u32 status;
 
 		rmb();
-		status = le32_to_cpu(tp->RxDescArray[entry].opts1);
+		status = le32_to_cpu(desc->opts1);
 
 		if (status & DescOwn)
 			break;
 		if (status & RxRES) {
-			printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name);
+			printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
+			       dev->name, status);
 			tp->stats.rx_errors++;
 			if (status & (RxRWT | RxRUNT))
 				tp->stats.rx_length_errors++;
 			if (status & RxCRC)
 				tp->stats.rx_crc_errors++;
+			rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 		} else {
-			struct RxDesc *desc = tp->RxDescArray + entry;
 			struct sk_buff *skb = tp->Rx_skbuff[entry];
 			int pkt_size = (status & 0x00001FFF) - 4;
 			void (*pci_action)(struct pci_dev *, dma_addr_t,
 				size_t, int) = pci_dma_sync_single_for_device;
 
+			/*
+			 * The driver does not support incoming fragmented
+			 * frames. They are seen as a symptom of over-mtu
+			 * sized frames.
+			 */
+			if (unlikely(rtl8169_fragmented_frame(status))) {
+				tp->stats.rx_dropped++;
+				tp->stats.rx_length_errors++;
+				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+				goto move_on;
+			}
+
 			rtl8169_rx_csum(skb, desc);
 			
 			pci_dma_sync_single_for_cpu(tp->pci_dev,
@@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 			tp->stats.rx_bytes += pkt_size;
 			tp->stats.rx_packets++;
 		}
-		
+move_on:		
 		cur_rx++; 
 		rx_left--;
 	}
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index e68cf5f..20edeb3 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -100,35 +100,8 @@ static int sh_debug;		/* Debug flag */
 
 #define SHAPER_BANNER	"CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
 
-/*
- *	Locking
- */
- 
-static int shaper_lock(struct shaper *sh)
-{
-	/*
-	 *	Lock in an interrupt must fail
-	 */
-	while (test_and_set_bit(0, &sh->locked))
-	{
-		if (!in_interrupt())
-			sleep_on(&sh->wait_queue);
-		else
-			return 0;
-			
-	}
-	return 1;
-}
-
 static void shaper_kick(struct shaper *sh);
 
-static void shaper_unlock(struct shaper *sh)
-{
-	clear_bit(0, &sh->locked);
-	wake_up(&sh->wait_queue);
-	shaper_kick(sh);
-}
-
 /*
  *	Compute clocks on a buffer
  */
@@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec)
  *	Throw a frame at a shaper.
  */
   
-static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
+
+static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
+	struct shaper *shaper = dev->priv;
  	struct sk_buff *ptr;
    
- 	/*
- 	 *	Get ready to work on this shaper. Lock may fail if its
- 	 *	an interrupt and locked.
- 	 */
- 	 
- 	if(!shaper_lock(shaper))
- 		return -1;
+	if (down_trylock(&shaper->sem))
+		return -1;
+
  	ptr=shaper->sendq.prev;
  	
  	/*
@@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
                 dev_kfree_skb(ptr);
                 shaper->stats.collisions++;
  	}
- 	shaper_unlock(shaper);
+	shaper_kick(shaper);
+	up(&shaper->sem);
  	return 0;
 }
 
@@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
  
 static void shaper_timer(unsigned long data)
 {
-	struct shaper *sh=(struct shaper *)data;
-	shaper_kick(sh);
+	struct shaper *shaper = (struct shaper *)data;
+
+	if (!down_trylock(&shaper->sem)) {
+		shaper_kick(shaper);
+		up(&shaper->sem);
+	} else
+		mod_timer(&shaper->timer, jiffies);
 }
 
 /*
@@ -311,19 +288,6 @@ static void shaper_kick(struct shaper *shaper)
 	struct sk_buff *skb;
 	
 	/*
-	 *	Shaper unlock will kick
-	 */
-	 
-	if (test_and_set_bit(0, &shaper->locked))
-	{
-		if(sh_debug)
-			printk("Shaper locked.\n");
-		mod_timer(&shaper->timer, jiffies);
-		return;
-	}
-
-		
-	/*
 	 *	Walk the list (may be empty)
 	 */
 	 
@@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper)
 	 
 	if(skb!=NULL)
 		mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
-
-	clear_bit(0, &shaper->locked);
 }
 
 
@@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper)
 static void shaper_flush(struct shaper *shaper)
 {
 	struct sk_buff *skb;
- 	if(!shaper_lock(shaper))
-	{
-		printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
- 		return;
-	}
+
+	down(&shaper->sem);
 	while((skb=skb_dequeue(&shaper->sendq))!=NULL)
 		dev_kfree_skb(skb);
-	shaper_unlock(shaper);
+	shaper_kick(shaper);
+	up(&shaper->sem);
 }
 
 /*
@@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev)
  *	ARP and other resolutions and not before.
  */
 
-
-static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct shaper *sh=dev->priv;
-	return shaper_qframe(sh, skb);
-}
-
 static struct net_device_stats *shaper_get_stats(struct net_device *dev)
 {
      	struct shaper *sh=dev->priv;
@@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev)
 	init_timer(&sh->timer);
 	sh->timer.function=shaper_timer;
 	sh->timer.data=(unsigned long)sh;
-	init_waitqueue_head(&sh->wait_queue);
 }
 
 /*
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 9e9dab7..8132d94 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -1,7 +1,7 @@
 /*
  * CompactPCI Hot Plug Driver
  *
- * Copyright (C) 2002 SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 SOMA Networks, Inc.
  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2001 IBM Corp.
  *
@@ -45,10 +45,10 @@
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(cpci_debug)					\
+		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -111,10 +111,8 @@ enable_slot(struct hotplug_slot *hotplug_slot)
 
 	dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
 
-	if(controller->ops->set_power) {
+	if (controller->ops->set_power)
 		retval = controller->ops->set_power(slot, 1);
-	}
-
 	return retval;
 }
 
@@ -126,37 +124,41 @@ disable_slot(struct hotplug_slot *hotplug_slot)
 
 	dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
 
+	down_write(&list_rwsem);
+
 	/* Unconfigure device */
 	dbg("%s - unconfiguring slot %s",
 	    __FUNCTION__, slot->hotplug_slot->name);
-	if((retval = cpci_unconfigure_slot(slot))) {
+	if ((retval = cpci_unconfigure_slot(slot))) {
 		err("%s - could not unconfigure slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		return retval;
+		goto disable_error;
 	}
 	dbg("%s - finished unconfiguring slot %s",
 	    __FUNCTION__, slot->hotplug_slot->name);
 
 	/* Clear EXT (by setting it) */
-	if(cpci_clear_ext(slot)) {
+	if (cpci_clear_ext(slot)) {
 		err("%s - could not clear EXT for slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
 		retval = -ENODEV;
+		goto disable_error;
 	}
 	cpci_led_on(slot);
 
-	if(controller->ops->set_power) {
-		retval = controller->ops->set_power(slot, 0);
-	}
+	if (controller->ops->set_power)
+		if ((retval = controller->ops->set_power(slot, 0)))
+			goto disable_error;
 
-	if(update_adapter_status(slot->hotplug_slot, 0)) {
+	if (update_adapter_status(slot->hotplug_slot, 0))
 		warn("failure to update adapter file");
-	}
 
-	if(slot->extracting) {
+	if (slot->extracting) {
 		slot->extracting = 0;
 		atomic_dec(&extracting);
 	}
+disable_error:
+	up_write(&list_rwsem);
 	return retval;
 }
 
@@ -165,9 +167,8 @@ cpci_get_power_status(struct slot *slot)
 {
 	u8 power = 1;
 
-	if(controller->ops->get_power) {
+	if (controller->ops->get_power)
 		power = controller->ops->get_power(slot);
-	}
 	return power;
 }
 
@@ -237,9 +238,8 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last)
 	int status = -ENOMEM;
 	int i;
 
-	if(!(controller && bus)) {
+	if (!(controller && bus))
 		return -ENODEV;
-	}
 
 	/*
 	 * Create a structure for each slot, and register that slot
@@ -316,32 +316,30 @@ int
 cpci_hp_unregister_bus(struct pci_bus *bus)
 {
 	struct slot *slot;
-	struct list_head *tmp;
-	struct list_head *next;
-	int status;
+	struct slot *tmp;
+	int status = 0;
 
 	down_write(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_write(&list_rwsem);
 		return -1;
 	}
-	list_for_each_safe(tmp, next, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
-		if(slot->bus == bus) {
+	list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+		if (slot->bus == bus) {
+			list_del(&slot->slot_list);
+			slots--;
+
 			dbg("deregistering slot %s", slot->hotplug_slot->name);
 			status = pci_hp_deregister(slot->hotplug_slot);
-			if(status) {
+			if (status) {
 				err("pci_hp_deregister failed with error %d",
 				    status);
-				return status;
+				break;
 			}
-
-			list_del(&slot->slot_list);
-			slots--;
 		}
 	}
 	up_write(&list_rwsem);
-	return 0;
+	return status;
 }
 
 /* This is the interrupt mode interrupt handler */
@@ -351,7 +349,7 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs)
 	dbg("entered cpci_hp_intr");
 
 	/* Check to see if it was our interrupt */
-	if((controller->irq_flags & SA_SHIRQ) &&
+	if ((controller->irq_flags & SA_SHIRQ) &&
 	    !controller->ops->check_irq(controller->dev_id)) {
 		dbg("exited cpci_hp_intr, not our interrupt");
 		return IRQ_NONE;
@@ -373,38 +371,30 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs)
  * INS bits of the cold-inserted devices.
  */
 static int
-init_slots(void)
+init_slots(int clear_ins)
 {
 	struct slot *slot;
-	struct list_head *tmp;
 	struct pci_dev* dev;
 
 	dbg("%s - enter", __FUNCTION__);
 	down_read(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_read(&list_rwsem);
 		return -1;
 	}
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
+	list_for_each_entry(slot, &slot_list, slot_list) {
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		if(cpci_check_and_clear_ins(slot)) {
+		if (clear_ins && cpci_check_and_clear_ins(slot))
 			dbg("%s - cleared INS for slot %s",
 			    __FUNCTION__, slot->hotplug_slot->name);
-			dev = pci_find_slot(slot->bus->number, PCI_DEVFN(slot->number, 0));
-			if(dev) {
-				if(update_adapter_status(slot->hotplug_slot, 1)) {
-					warn("failure to update adapter file");
-				}
-				if(update_latch_status(slot->hotplug_slot, 1)) {
-					warn("failure to update latch file");
-				}
-				slot->dev = dev;
-			} else {
-				err("%s - no driver attached to device in slot %s",
-				    __FUNCTION__, slot->hotplug_slot->name);
-			}
+		dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0));
+		if (dev) {
+			if (update_adapter_status(slot->hotplug_slot, 1))
+				warn("failure to update adapter file");
+			if (update_latch_status(slot->hotplug_slot, 1))
+				warn("failure to update latch file");
+			slot->dev = dev;
 		}
 	}
 	up_read(&list_rwsem);
@@ -416,26 +406,28 @@ static int
 check_slots(void)
 {
 	struct slot *slot;
-	struct list_head *tmp;
 	int extracted;
 	int inserted;
 	u16 hs_csr;
 
 	down_read(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_read(&list_rwsem);
 		err("no slots registered, shutting down");
 		return -1;
 	}
 	extracted = inserted = 0;
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
+	list_for_each_entry(slot, &slot_list, slot_list) {
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		if(cpci_check_and_clear_ins(slot)) {
-			/* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */
-			if(slot->dev) {
-				warn("slot %s already inserted", slot->hotplug_slot->name);
+		if (cpci_check_and_clear_ins(slot)) {
+			/*
+			 * Some broken hardware (e.g. PLX 9054AB) asserts
+			 * ENUM# twice...
+			 */
+			if (slot->dev) {
+				warn("slot %s already inserted",
+				     slot->hotplug_slot->name);
 				inserted++;
 				continue;
 			}
@@ -452,7 +444,7 @@ check_slots(void)
 			/* Configure device */
 			dbg("%s - configuring slot %s",
 			    __FUNCTION__, slot->hotplug_slot->name);
-			if(cpci_configure_slot(slot)) {
+			if (cpci_configure_slot(slot)) {
 				err("%s - could not configure slot %s",
 				    __FUNCTION__, slot->hotplug_slot->name);
 				continue;
@@ -465,13 +457,11 @@ check_slots(void)
 			dbg("%s - slot %s HS_CSR (2) = %04x",
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
-			if(update_latch_status(slot->hotplug_slot, 1)) {
+			if (update_latch_status(slot->hotplug_slot, 1))
 				warn("failure to update latch file");
-			}
 
-			if(update_adapter_status(slot->hotplug_slot, 1)) {
+			if (update_adapter_status(slot->hotplug_slot, 1))
 				warn("failure to update adapter file");
-			}
 
 			cpci_led_off(slot);
 
@@ -481,7 +471,7 @@ check_slots(void)
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
 			inserted++;
-		} else if(cpci_check_ext(slot)) {
+		} else if (cpci_check_ext(slot)) {
 			/* Process extraction request */
 			dbg("%s - slot %s extracted",
 			    __FUNCTION__, slot->hotplug_slot->name);
@@ -491,27 +481,25 @@ check_slots(void)
 			dbg("%s - slot %s HS_CSR = %04x",
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
-			if(!slot->extracting) {
-				if(update_latch_status(slot->hotplug_slot, 0)) {
+			if (!slot->extracting) {
+				if (update_latch_status(slot->hotplug_slot, 0)) {
 					warn("failure to update latch file");
-
 				}
-				atomic_inc(&extracting);
 				slot->extracting = 1;
+				atomic_inc(&extracting);
 			}
 			extracted++;
-		} else if(slot->extracting) {
+		} else if (slot->extracting) {
 			hs_csr = cpci_get_hs_csr(slot);
-			if(hs_csr == 0xffff) {
+			if (hs_csr == 0xffff) {
 				/*
 				 * Hmmm, we're likely hosed at this point, should we
 				 * bother trying to tell the driver or not?
 				 */
 				err("card in slot %s was improperly removed",
 				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
+				if (update_adapter_status(slot->hotplug_slot, 0))
 					warn("failure to update adapter file");
-				}
 				slot->extracting = 0;
 				atomic_dec(&extracting);
 			}
@@ -520,10 +508,9 @@ check_slots(void)
 	up_read(&list_rwsem);
 	dbg("inserted=%d, extracted=%d, extracting=%d",
 	    inserted, extracted, atomic_read(&extracting));
-	if(inserted || extracted) {
+	if (inserted || extracted)
 		return extracted;
-	}
-	else if(!atomic_read(&extracting)) {
+	else if (!atomic_read(&extracting)) {
 		err("cannot find ENUM# source, shutting down");
 		return -1;
 	}
@@ -541,12 +528,12 @@ event_thread(void *data)
 	unlock_kernel();
 
 	dbg("%s - event thread started", __FUNCTION__);
-	while(1) {
+	while (1) {
 		dbg("event thread sleeping");
 		down_interruptible(&event_semaphore);
 		dbg("event thread woken, thread_finished = %d",
 		    thread_finished);
-		if(thread_finished || signal_pending(current))
+		if (thread_finished || signal_pending(current))
 			break;
 		do {
 			rc = check_slots();
@@ -558,7 +545,9 @@ event_thread(void *data)
 				thread_finished = 1;
 				break;
 			}
-		} while(atomic_read(&extracting) != 0);
+		} while (atomic_read(&extracting) && !thread_finished);
+		if (thread_finished)
+			break;
 
 		/* Re-enable ENUM# interrupt */
 		dbg("%s - re-enabling irq", __FUNCTION__);
@@ -579,21 +568,21 @@ poll_thread(void *data)
 	daemonize("cpci_hp_polld");
 	unlock_kernel();
 
-	while(1) {
-		if(thread_finished || signal_pending(current))
+	while (1) {
+		if (thread_finished || signal_pending(current))
 			break;
-		if(controller->ops->query_enum()) {
+		if (controller->ops->query_enum()) {
 			do {
 				rc = check_slots();
-				if(rc > 0) {
+				if (rc > 0) {
 					/* Give userspace a chance to handle extraction */
 					msleep(500);
-				} else if(rc < 0) {
+				} else if (rc < 0) {
 					dbg("%s - error checking slots", __FUNCTION__);
 					thread_finished = 1;
 					break;
 				}
-			} while(atomic_read(&extracting) != 0);
+			} while (atomic_read(&extracting) && !thread_finished);
 		}
 		msleep(100);
 	}
@@ -612,12 +601,11 @@ cpci_start_thread(void)
 	init_MUTEX_LOCKED(&thread_exit);
 	thread_finished = 0;
 
-	if(controller->irq) {
+	if (controller->irq)
 		pid = kernel_thread(event_thread, NULL, 0);
-	} else {
+	else
 		pid = kernel_thread(poll_thread, NULL, 0);
-	}
-	if(pid < 0) {
+	if (pid < 0) {
 		err("Can't start up our thread");
 		return -1;
 	}
@@ -630,9 +618,8 @@ cpci_stop_thread(void)
 {
 	thread_finished = 1;
 	dbg("thread finish command given");
-	if(controller->irq) {
+	if (controller->irq)
 		up(&event_semaphore);
-	}
 	dbg("wait for thread to exit");
 	down(&thread_exit);
 }
@@ -642,45 +629,67 @@ cpci_hp_register_controller(struct cpci_hp_controller *new_controller)
 {
 	int status = 0;
 
-	if(!controller) {
-		controller = new_controller;
-		if(controller->irq) {
-			if(request_irq(controller->irq,
-					cpci_hp_intr,
-					controller->irq_flags,
-					MY_NAME, controller->dev_id)) {
-				err("Can't get irq %d for the hotplug cPCI controller", controller->irq);
-				status = -ENODEV;
-			}
-			dbg("%s - acquired controller irq %d", __FUNCTION__,
-			    controller->irq);
+	if (controller)
+		return -1;
+	if (!(new_controller && new_controller->ops))
+		return -EINVAL;
+	if (new_controller->irq) {
+		if (!(new_controller->ops->enable_irq &&
+		     new_controller->ops->disable_irq))
+			status = -EINVAL;
+		if (request_irq(new_controller->irq,
+			       cpci_hp_intr,
+			       new_controller->irq_flags,
+			       MY_NAME,
+			       new_controller->dev_id)) {
+			err("Can't get irq %d for the hotplug cPCI controller",
+			    new_controller->irq);
+			status = -ENODEV;
 		}
-	} else {
-		err("cPCI hotplug controller already registered");
-		status = -1;
+		dbg("%s - acquired controller irq %d",
+		    __FUNCTION__, new_controller->irq);
 	}
+	if (!status)
+		controller = new_controller;
 	return status;
 }
 
+static void
+cleanup_slots(void)
+{
+	struct slot *slot;
+	struct slot *tmp;
+
+	/*
+	 * Unregister all of our slots with the pci_hotplug subsystem,
+	 * and free up all memory that we had allocated.
+	 */
+	down_write(&list_rwsem);
+	if (!slots)
+		goto cleanup_null;
+	list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+		list_del(&slot->slot_list);
+		pci_hp_deregister(slot->hotplug_slot);
+	}
+cleanup_null:
+	up_write(&list_rwsem);
+	return;
+}
+
 int
 cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller)
 {
 	int status = 0;
 
-	if(controller) {
-		if(atomic_read(&extracting) != 0) {
-			return -EBUSY;
-		}
-		if(!thread_finished) {
+	if (controller) {
+		if (!thread_finished)
 			cpci_stop_thread();
-		}
-		if(controller->irq) {
+		if (controller->irq)
 			free_irq(controller->irq, controller->dev_id);
-		}
 		controller = NULL;
-	} else {
+		cleanup_slots();
+	} else
 		status = -ENODEV;
-	}
 	return status;
 }
 
@@ -691,32 +700,28 @@ cpci_hp_start(void)
 	int status;
 
 	dbg("%s - enter", __FUNCTION__);
-	if(!controller) {
+	if (!controller)
 		return -ENODEV;
-	}
 
 	down_read(&list_rwsem);
-	if(list_empty(&slot_list)) {
+	if (list_empty(&slot_list)) {
 		up_read(&list_rwsem);
 		return -ENODEV;
 	}
 	up_read(&list_rwsem);
 
-	if(first) {
-		status = init_slots();
-		if(status) {
-			return status;
-		}
+	status = init_slots(first);
+	if (first)
 		first = 0;
-	}
+	if (status)
+		return status;
 
 	status = cpci_start_thread();
-	if(status) {
+	if (status)
 		return status;
-	}
 	dbg("%s - thread started", __FUNCTION__);
 
-	if(controller->irq) {
+	if (controller->irq) {
 		/* Start enum interrupt processing */
 		dbg("%s - enabling irq", __FUNCTION__);
 		controller->ops->enable_irq();
@@ -728,13 +733,9 @@ cpci_hp_start(void)
 int
 cpci_hp_stop(void)
 {
-	if(!controller) {
+	if (!controller)
 		return -ENODEV;
-	}
-	if(atomic_read(&extracting) != 0) {
-		return -EBUSY;
-	}
-	if(controller->irq) {
+	if (controller->irq) {
 		/* Stop enum interrupt processing */
 		dbg("%s - disabling irq", __FUNCTION__);
 		controller->ops->disable_irq();
@@ -743,34 +744,6 @@ cpci_hp_stop(void)
 	return 0;
 }
 
-static void __exit
-cleanup_slots(void)
-{
-	struct list_head *tmp;
-	struct slot *slot;
-
-	/*
-	 * Unregister all of our slots with the pci_hotplug subsystem,
-	 * and free up all memory that we had allocated.
-	 */
-	down_write(&list_rwsem);
-	if(!slots) {
-		goto null_cleanup;
-	}
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
-		list_del(&slot->slot_list);
-		pci_hp_deregister(slot->hotplug_slot);
-		kfree(slot->hotplug_slot->info);
-		kfree(slot->hotplug_slot->name);
-		kfree(slot->hotplug_slot);
-		kfree(slot);
-	}
-      null_cleanup:
-	up_write(&list_rwsem);
-	return;
-}
-
 int __init
 cpci_hotplug_init(int debug)
 {
@@ -784,7 +757,8 @@ cpci_hotplug_exit(void)
 	/*
 	 * Clean everything up.
 	 */
-	cleanup_slots();
+	cpci_hp_stop();
+	cpci_hp_unregister_controller(controller);
 }
 
 EXPORT_SYMBOL_GPL(cpci_hp_register_controller);
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 69eb4fc..c878028 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -1,7 +1,7 @@
 /*
  * CompactPCI Hot Plug Driver PCI functions
  *
- * Copyright (C) 2002 by SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 by SOMA Networks, Inc.
  *
  * All rights reserved.
  *
@@ -38,10 +38,10 @@ extern int cpci_debug;
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(cpci_debug)					\
+		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -57,16 +57,15 @@ u8 cpci_get_attention_status(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
 
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
+
 	return hs_csr & 0x0008 ? 1 : 0;
 }
 
@@ -78,27 +77,22 @@ int cpci_set_attention_status(struct slot* slot, int status)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(status) {
+	if (status)
 		hs_csr |= HS_CSR_LOO;
-	} else {
+	else
 		hs_csr &= ~HS_CSR_LOO;
-	}
-	if(pci_bus_write_config_word(slot->bus,
+	if (pci_bus_write_config_word(slot->bus,
 				      slot->devfn,
 				      hs_cap + 2,
-				      hs_csr)) {
+				      hs_csr))
 		return 0;
-	}
 	return 1;
 }
 
@@ -110,16 +104,13 @@ u16 cpci_get_hs_csr(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0xFFFF;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0xFFFF;
-	}
 	return hs_csr;
 }
 
@@ -132,24 +123,22 @@ int cpci_check_and_clear_ins(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_INS) {
+	if (hs_csr & HS_CSR_INS) {
 		/* Clear INS (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			ins = 0;
-		}
-		ins = 1;
+		else
+			ins = 1;
 	}
 	return ins;
 }
@@ -163,18 +152,15 @@ int cpci_check_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT)
 		ext = 1;
-	}
 	return ext;
 }
 
@@ -186,23 +172,20 @@ int cpci_clear_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT) {
 		/* Clear EXT (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			return -ENODEV;
-		}
 	}
 	return 0;
 }
@@ -215,18 +198,16 @@ int cpci_led_on(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
+	if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
 		hs_csr |= HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -246,18 +227,16 @@ int cpci_led_off(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_LOO) {
+	if (hs_csr & HS_CSR_LOO) {
 		hs_csr &= ~HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -274,19 +253,6 @@ int cpci_led_off(struct slot* slot)
  * Device configuration functions
  */
 
-static void cpci_enable_device(struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-
-	pci_enable_device(dev);
-	if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		bus = dev->subordinate;
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			cpci_enable_device(dev);
-		}
-	}
-}
-
 int cpci_configure_slot(struct slot* slot)
 {
 	unsigned char busnr;
@@ -294,14 +260,14 @@ int cpci_configure_slot(struct slot* slot)
 
 	dbg("%s - enter", __FUNCTION__);
 
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		dbg("pci_dev null, finding %02x:%02x:%x",
 		    slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn));
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
 	}
 
 	/* Still NULL? Well then scan for it! */
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		int n;
 		dbg("pci_dev still null");
 
@@ -311,10 +277,10 @@ int cpci_configure_slot(struct slot* slot)
 		 */
 		n = pci_scan_slot(slot->bus, slot->devfn);
 		dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n);
-		if(n > 0)
+		if (n > 0)
 			pci_bus_add_devices(slot->bus);
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
-		if(slot->dev == NULL) {
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
+		if (slot->dev == NULL) {
 			err("Could not find PCI device for slot %02x", slot->number);
 			return 1;
 		}
@@ -329,8 +295,6 @@ int cpci_configure_slot(struct slot* slot)
 
 	pci_bus_assign_resources(slot->dev->bus);
 
-	cpci_enable_device(slot->dev);
-
 	dbg("%s - exit", __FUNCTION__);
 	return 0;
 }
@@ -341,15 +305,15 @@ int cpci_unconfigure_slot(struct slot* slot)
 	struct pci_dev *dev;
 
 	dbg("%s - enter", __FUNCTION__);
-	if(!slot->dev) {
+	if (!slot->dev) {
 		err("No device for slot %02x\n", slot->number);
 		return -ENODEV;
 	}
 
 	for (i = 0; i < 8; i++) {
-		dev = pci_find_slot(slot->bus->number,
+		dev = pci_get_slot(slot->bus,
 				    PCI_DEVFN(PCI_SLOT(slot->devfn), i));
-		if(dev) {
+		if (dev) {
 			pci_remove_bus_device(dev);
 			slot->dev = NULL;
 		}
diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c
index 243a51d..7957cdc 100644
--- a/drivers/pci/hotplug/shpchprm_acpi.c
+++ b/drivers/pci/hotplug/shpchprm_acpi.c
@@ -1626,7 +1626,7 @@ int shpchprm_set_hpp(
 	pci_bus->number = func->bus;
 	devfn = PCI_DEVFN(func->device, func->function);
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 
 	if (ab) {
 		if (ab->_hpp) {
@@ -1681,7 +1681,7 @@ void shpchprm_enable_card(
 		| PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
 	bcmd = bcommand  = bcommand | PCI_BRIDGE_CTL_NO_ISA;
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 	if (ab) {
 		if (ab->_hpp) {
 			if (ab->_hpp->enable_perr) {
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 54c5234..3be5464 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -665,15 +665,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	return ata_pci_init_one(pdev, port_info, n_ports);
 }
 
-/**
- *	piix_init -
- *
- *	LOCKING:
- *
- *	RETURNS:
- *
- */
-
 static int __init piix_init(void)
 {
 	int rc;
@@ -689,13 +680,6 @@ static int __init piix_init(void)
 	return 0;
 }
 
-/**
- *	piix_exit -
- *
- *	LOCKING:
- *
- */
-
 static void __exit piix_exit(void)
 {
 	pci_unregister_driver(&piix_pci_driver);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 30a88f0..21d194c 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	ata_wait_idle(ap);
 }
 
+
+/**
+ *	ata_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller using MMIO
+ *	or PIO as indicated by the ATA_FLAG_MMIO flag.
+ *	Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ *	Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ *	hob_lbal, hob_lbam, and hob_lbah.
+ *
+ *	This function waits for idle (!BUSY and !DRQ) after writing
+ *	registers.  If the control register has a new value, this
+ *	function also waits for idle after writing control and before
+ *	writing the remaining registers.
+ *
+ *	May be used as the tf_load() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_exec_command - issue ATA command to host controller
+ *	ata_exec_command_pio - issue ATA command to host controller
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
  *
- *	Issues PIO/MMIO write to ATA command register, with proper
+ *	Issues PIO write to ATA command register, with proper
  *	synchronization with interrupt handler / other threads.
  *
  *	LOCKING:
@@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	ata_pause(ap);
 }
 
+
+/**
+ *	ata_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues PIO/MMIO write to ATA command register, with proper
+ *	synchronization with interrupt handler / other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	ata_tf_read_pio - input device's ATA taskfile shadow registers
  *	@ap: Port from which input is read
  *	@tf: ATA taskfile register set for storing input
  *
@@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	}
 }
 
+
+/**
+ *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	@ap: Port from which input is read
+ *	@tf: ATA taskfile register set for storing input
+ *
+ *	Reads ATA taskfile registers for currently-selected device
+ *	into @tf.
+ *
+ *	Reads nsect, lbal, lbam, lbah, and device.  If ATA_TFLAG_LBA48
+ *	is set, also reads the hob registers.
+ *
+ *	May be used as the tf_read() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile status register for currently-selected device
- *	and return it's value. This also clears pending interrupts
+ *	and return its value. This also clears pending interrupts
  *      from this device
  *
  *	LOCKING:
@@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap)
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile status register for currently-selected device
- *	via MMIO and return it's value. This also clears pending interrupts
+ *	via MMIO and return its value. This also clears pending interrupts
  *      from this device
  *
  *	LOCKING:
@@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap)
        	return readb((void __iomem *) ap->ioaddr.status_addr);
 }
 
+
+/**
+ *	ata_check_status - Read device status reg & clear interrupt
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile status register for currently-selected device
+ *	and return its value. This also clears pending interrupts
+ *      from this device
+ *
+ *	May be used as the check_status() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_check_status(struct ata_port *ap)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap)
 	return ata_check_status_pio(ap);
 }
 
+
+/**
+ *	ata_altstatus - Read device alternate status reg
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile alternate status register for
+ *	currently-selected device and return its value.
+ *
+ *	Note: may NOT be used as the check_altstatus() entry in
+ *	ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_altstatus(struct ata_port *ap)
 {
 	if (ap->ops->check_altstatus)
@@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap)
 	return inb(ap->ioaddr.altstatus_addr);
 }
 
+
+/**
+ *	ata_chk_err - Read device error reg
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile error register for
+ *	currently-selected device and return its value.
+ *
+ *	Note: may NOT be used as the check_err() entry in
+ *	ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_chk_err(struct ata_port *ap)
 {
 	if (ap->ops->check_err)
@@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s,
 	}
 }
 
+
+/**
+ *	ata_noop_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *
+ *	This function performs no actual function.
+ *
+ *	May be used as the dev_select() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	caller.
+ */
 void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
 {
 }
 
+
 /**
  *	ata_std_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
@@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
  *
  *	Use the method defined in the ATA specification to
  *	make either device 0, or device 1, active on the
- *	ATA channel.
+ *	ATA channel.  Works with both PIO and MMIO.
+ *
+ *	May be used as the dev_select() entry in ata_port_operations.
  *
  *	LOCKING:
  *	caller.
@@ -1190,7 +1299,12 @@ err_out:
  *	ata_bus_probe - Reset and probe ATA bus
  *	@ap: Bus to probe
  *
+ *	Master ATA bus probing function.  Initiates a hardware-dependent
+ *	bus reset, then attempts to identify any devices found on
+ *	the bus.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
  *	Zero on success, non-zero on error.
@@ -1229,10 +1343,14 @@ err_out:
 }
 
 /**
- *	ata_port_probe -
- *	@ap:
+ *	ata_port_probe - Mark port as enabled
+ *	@ap: Port for which we indicate enablement
  *
- *	LOCKING:
+ *	Modify @ap data structure such that the system
+ *	thinks that the entire port is enabled.
+ *
+ *	LOCKING: host_set lock, or some other form of
+ *	serialization.
  */
 
 void ata_port_probe(struct ata_port *ap)
@@ -1241,10 +1359,15 @@ void ata_port_probe(struct ata_port *ap)
 }
 
 /**
- *	__sata_phy_reset -
- *	@ap:
+ *	__sata_phy_reset - Wake/reset a low-level SATA PHY
+ *	@ap: SATA port associated with target SATA PHY.
+ *
+ *	This function issues commands to standard SATA Sxxx
+ *	PHY registers, to wake up the phy (and device), and
+ *	clear any reset condition.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 void __sata_phy_reset(struct ata_port *ap)
@@ -1289,10 +1412,14 @@ void __sata_phy_reset(struct ata_port *ap)
 }
 
 /**
- *	__sata_phy_reset -
- *	@ap:
+ *	sata_phy_reset - Reset SATA bus.
+ *	@ap: SATA port associated with target SATA PHY.
+ *
+ *	This function resets the SATA bus, and then probes
+ *	the bus for devices.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 void sata_phy_reset(struct ata_port *ap)
@@ -1304,10 +1431,16 @@ void sata_phy_reset(struct ata_port *ap)
 }
 
 /**
- *	ata_port_disable -
- *	@ap:
+ *	ata_port_disable - Disable port.
+ *	@ap: Port to be disabled.
  *
- *	LOCKING:
+ *	Modify @ap data structure such that the system
+ *	thinks that the entire port is disabled, and should
+ *	never attempt to probe or communicate with devices
+ *	on this port.
+ *
+ *	LOCKING: host_set lock, or some other form of
+ *	serialization.
  */
 
 void ata_port_disable(struct ata_port *ap)
@@ -1416,7 +1549,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@ap: port on which timings will be programmed
  *
+ *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 static void ata_set_mode(struct ata_port *ap)
@@ -1467,7 +1603,10 @@ err_out:
  *	@tmout_pat: impatience timeout
  *	@tmout: overall timeout
  *
- *	LOCKING:
+ *	Sleep until ATA Status register bit BSY clears,
+ *	or a timeout occurs.
+ *
+ *	LOCKING: None.
  *
  */
 
@@ -1553,10 +1692,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
 }
 
 /**
- *	ata_bus_edd -
- *	@ap:
+ *	ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
+ *	@ap: Port to reset and probe
+ *
+ *	Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
+ *	probe the bus.  Not often used these days.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 
@@ -1633,8 +1776,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
  *	the device is ATA or ATAPI.
  *
  *	LOCKING:
- *	Inherited from caller.  Some functions called by this function
- *	obtain the host_set lock.
+ *	PCI/etc. bus probe sem.
+ *	Obtains host_set lock.
  *
  *	SIDE EFFECTS:
  *	Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
@@ -1876,7 +2019,11 @@ static int fgb(u32 bitmap)
  *	@xfer_mode_out: (output) SET FEATURES - XFER MODE code
  *	@xfer_shift_out: (output) bit shift that selects this mode
  *
+ *	Based on host and device capabilities, determine the
+ *	maximum transfer mode that is amenable to all.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
  *	Zero on success, negative on error.
@@ -1909,7 +2056,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap,
  *	@ap: Port associated with device @dev
  *	@dev: Device to which command will be sent
  *
+ *	Issue SET FEATURES - XFER MODE command to device @dev
+ *	on port @ap.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  */
 
 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
@@ -1947,10 +2098,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
 }
 
 /**
- *	ata_sg_clean -
- *	@qc:
+ *	ata_sg_clean - Unmap DMA memory associated with command
+ *	@qc: Command containing DMA memory to be released
+ *
+ *	Unmap all mapped DMA memory associated with this command.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  */
 
 static void ata_sg_clean(struct ata_queued_cmd *qc)
@@ -1981,7 +2135,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
  *	ata_fill_sg - Fill PCI IDE PRD table
  *	@qc: Metadata associated with taskfile to be transferred
  *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command.
+ *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 static void ata_fill_sg(struct ata_queued_cmd *qc)
@@ -2028,7 +2186,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
  *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
  *
+ *	Allow low-level driver to filter ATA PACKET commands, returning
+ *	a status indicating whether or not it is OK to use DMA for the
+ *	supplied PACKET command.
+ *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ *
  *	RETURNS: 0 when ATAPI DMA can be used
  *               nonzero otherwise
  */
@@ -2046,6 +2210,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
  *	ata_qc_prep - Prepare taskfile for submission
  *	@qc: Metadata associated with taskfile to be prepared
  *
+ *	Prepare ATA taskfile for submission.
+ *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  */
@@ -2057,6 +2223,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
 	ata_fill_sg(qc);
 }
 
+/**
+ *	ata_sg_init_one - Associate command with memory buffer
+ *	@qc: Command to be associated
+ *	@buf: Memory buffer
+ *	@buflen: Length of memory buffer, in bytes.
+ *
+ *	Initialize the data-related elements of queued_cmd @qc
+ *	to point to a single memory buffer, @buf of byte length @buflen.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
+
+
+/**
+ *	ata_sg_init_one - Prepare a one-entry scatter-gather list.
+ *	@qc:  Queued command
+ *	@buf:  transfer buffer
+ *	@buflen:  length of buf
+ *
+ *	Builds a single-entry scatter-gather list to initiate a
+ *	transfer utilizing the specified buffer.
+ *
+ *	LOCKING:
+ */
 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 {
 	struct scatterlist *sg;
@@ -2074,6 +2266,32 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 	sg->length = buflen;
 }
 
+/**
+ *	ata_sg_init - Associate command with scatter-gather table.
+ *	@qc: Command to be associated
+ *	@sg: Scatter-gather table.
+ *	@n_elem: Number of elements in s/g table.
+ *
+ *	Initialize the data-related elements of queued_cmd @qc
+ *	to point to a scatter-gather table @sg, containing @n_elem
+ *	elements.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
+
+/**
+ *	ata_sg_init - Assign a scatter gather list to a queued command
+ *	@qc:  Queued command
+ *	@sg:  Scatter-gather list
+ *	@n_elem:  length of sg list
+ *
+ *	Attaches a scatter-gather list to a queued command.
+ *
+ *	LOCKING:
+ */
+
 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 		 unsigned int n_elem)
 {
@@ -2083,14 +2301,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 }
 
 /**
- *	ata_sg_setup_one -
- *	@qc:
+ *	ata_sg_setup_one - DMA-map the memory buffer associated with a command.
+ *	@qc: Command with memory buffer to be mapped.
+ *
+ *	DMA-map the memory buffer associated with queued_cmd @qc.
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
  *	RETURNS:
- *
+ *	Zero on success, negative on error.
  */
 
 static int ata_sg_setup_one(struct ata_queued_cmd *qc)
@@ -2115,13 +2335,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_sg_setup -
- *	@qc:
+ *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ *	@qc: Command with scatter-gather table to be mapped.
+ *
+ *	DMA-map the scatter-gather table associated with queued_cmd @qc.
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
  *	RETURNS:
+ *	Zero on success, negative on error.
  *
  */
 
@@ -2151,6 +2374,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  *
  *	RETURNS:
  *
@@ -2198,6 +2422,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  */
 
 static void ata_pio_complete (struct ata_port *ap)
@@ -2240,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap)
 	ata_qc_complete(qc, drv_stat);
 }
 
+
+/**
+ *	swap_buf_le16 -
+ *	@buf:  Buffer to swap
+ *	@buf_words:  Number of 16-bit words in buffer.
+ *
+ *	Swap halves of 16-bit words if needed to convert from
+ *	little-endian byte order to native cpu byte order, or
+ *	vice-versa.
+ *
+ *	LOCKING:
+ */
 void swap_buf_le16(u16 *buf, unsigned int buf_words)
 {
 #ifdef __BIG_ENDIAN
@@ -2415,6 +2652,7 @@ err_out:
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  */
 
 static void ata_pio_block(struct ata_port *ap)
@@ -2583,6 +2821,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
  *	transaction completed successfully.
  *
  *	LOCKING:
+ *	Inherited from SCSI layer (none, can sleep)
  */
 
 static void ata_qc_timeout(struct ata_queued_cmd *qc)
@@ -2692,6 +2931,7 @@ out:
  *	@dev: Device from whom we request an available command structure
  *
  *	LOCKING:
+ *	None.
  */
 
 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
@@ -2717,6 +2957,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
  *	@dev: Device from whom we request an available command structure
  *
  *	LOCKING:
+ *	None.
  */
 
 struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
@@ -2781,6 +3022,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
  *	in case something prevents using it.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 void ata_qc_free(struct ata_queued_cmd *qc)
@@ -2794,9 +3036,13 @@ void ata_qc_free(struct ata_queued_cmd *qc)
 /**
  *	ata_qc_complete - Complete an active ATA command
  *	@qc: Command to complete
- *	@drv_stat: ATA status register contents
+ *	@drv_stat: ATA Status register contents
+ *
+ *	Indicate to the mid and upper layers that an ATA
+ *	command has completed, with either an ok or not-ok status.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 
@@ -2892,6 +3138,7 @@ err_out:
 	return -1;
 }
 
+
 /**
  *	ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
  *	@qc: command to issue to device
@@ -2901,6 +3148,8 @@ err_out:
  *	classes called "protocols", and issuing each type of protocol
  *	is slightly different.
  *
+ *	May be used as the qc_issue() entry in ata_port_operations.
+ *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
@@ -2958,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
  *
  *	LOCKING:
@@ -3065,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
 	     ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 }
 
+
+/**
+ *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ *	May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_bmdma_start(struct ata_queued_cmd *qc)
 {
 	if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3073,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
 		ata_bmdma_start_pio(qc);
 }
 
+
+/**
+ *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Writes address of PRD table to device's PRD Table Address
+ *	register, sets the DMA control register, and calls
+ *	ops->exec_command() to start the transfer.
+ *
+ *	May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_bmdma_setup(struct ata_queued_cmd *qc)
 {
 	if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3081,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
 		ata_bmdma_setup_pio(qc);
 }
 
+
+/**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 void ata_bmdma_irq_clear(struct ata_port *ap)
 {
     if (ap->flags & ATA_FLAG_MMIO) {
@@ -3093,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
 
 }
 
+
+/**
+ *	ata_bmdma_status - Read PCI IDE BMDMA status
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Read and return BMDMA status register.
+ *
+ *	May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 u8 ata_bmdma_status(struct ata_port *ap)
 {
 	u8 host_stat;
@@ -3104,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap)
 	return host_stat;
 }
 
+
+/**
+ *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clears the ATA_DMA_START flag in the dma control register
+ *
+ *	May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 void ata_bmdma_stop(struct ata_port *ap)
 {
 	if (ap->flags & ATA_FLAG_MMIO) {
@@ -3203,13 +3517,18 @@ idle_irq:
 
 /**
  *	ata_interrupt - Default ATA host interrupt handler
- *	@irq: irq line
- *	@dev_instance: pointer to our host information structure
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host_set information structure
  *	@regs: unused
  *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_host_intr() for each port that is not disabled.
+ *
  *	LOCKING:
+ *	Obtains host_set lock during operation.
  *
  *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
  *
  */
 
@@ -3302,6 +3621,19 @@ err_out:
 	ata_qc_complete(qc, ATA_ERR);
 }
 
+
+/**
+ *	ata_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates space for PRD table.
+ *
+ *	May be used as the port_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ */
+
 int ata_port_start (struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
@@ -3315,6 +3647,18 @@ int ata_port_start (struct ata_port *ap)
 	return 0;
 }
 
+
+/**
+ *	ata_port_stop - Undo ata_port_start()
+ *	@ap: Port to shut down
+ *
+ *	Frees the PRD table.
+ *
+ *	May be used as the port_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ */
+
 void ata_port_stop (struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
@@ -3357,7 +3701,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
  *	@ent: Probe information provided by low-level driver
  *	@port_no: Port number associated with this ata_port
  *
+ *	Initialize a new ata_port structure, and its associated
+ *	scsi_host.
+ *
  *	LOCKING:
+ *	Inherited from caller.
  *
  */
 
@@ -3412,9 +3760,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
  *	@host_set: Collections of ports to which we add
  *	@port_no: Port number associated with this host
  *
+ *	Attach low-level ATA driver to system.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
+ *	New ata_port on success, for NULL on error.
  *
  */
 
@@ -3447,12 +3799,22 @@ err_out:
 }
 
 /**
- *	ata_device_add -
- *	@ent:
+ *	ata_device_add - Register hardware device with ATA and SCSI layers
+ *	@ent: Probe information describing hardware device to be registered
+ *
+ *	This function processes the information provided in the probe
+ *	information struct @ent, allocates the necessary ATA and SCSI
+ *	host information structures, initializes them, and registers
+ *	everything with requisite kernel subsystems.
+ *
+ *	This function requests irqs, probes the ATA bus, and probes
+ *	the SCSI bus.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
+ *	Number of ports registered.  Zero on error (no ports registered).
  *
  */
 
@@ -3604,7 +3966,15 @@ int ata_scsi_release(struct Scsi_Host *host)
 /**
  *	ata_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
+ *
+ *	Utility function which initializes data_addr, error_addr,
+ *	feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ *	device_addr, status_addr, and command_addr to standard offsets
+ *	relative to cmd_addr.
+ *
+ *	Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
  */
+
 void ata_std_ports(struct ata_ioports *ioaddr)
 {
 	ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
@@ -3646,6 +4016,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
 	return probe_ent;
 }
 
+
+
+/**
+ *	ata_pci_init_native_mode - Initialize native-mode driver
+ *	@pdev:  pci device to be initialized
+ *	@port:  array[2] of pointers to port info structures.
+ *
+ *	Utility function which allocates and initializes an
+ *	ata_probe_ent structure for a standard dual-port
+ *	PIO-based IDE controller.  The returned ata_probe_ent
+ *	structure can be passed to ata_device_add().  The returned
+ *	ata_probe_ent structure should then be freed with kfree().
+ */
+
 #ifdef CONFIG_PCI
 struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
@@ -3727,10 +4111,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
  *	@port_info: Information from low-level host driver
  *	@n_ports: Number of ports attached to host controller
  *
+ *	This is a helper function which can be called from a driver's
+ *	xxx_init_one() probe function if the hardware uses traditional
+ *	IDE taskfile registers.
+ *
+ *	This function calls pci_enable_device(), reserves its register
+ *	regions, sets the dma mask, enables bus master mode, and calls
+ *	ata_device_add()
+ *
  *	LOCKING:
  *	Inherited from PCI layer (may sleep).
  *
  *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
  *
  */
 
@@ -3949,15 +4342,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
 #endif /* CONFIG_PCI */
 
 
-/**
- *	ata_init -
- *
- *	LOCKING:
- *
- *	RETURNS:
- *
- */
-
 static int __init ata_init(void)
 {
 	ata_wq = create_workqueue("ata");
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 416ba67..7a4adc4 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -947,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
 }
 
 /**
- *	ata_scsiop_noop -
+ *	ata_scsiop_noop - Command handler that simply returns success.
  *	@args: device IDENTIFY data / SCSI command of interest.
  *	@rbuf: Response buffer, to which simulated SCSI cmd output is sent.
  *	@buflen: Response buffer length.
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 5794482..3c97aa4 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	int ret, i;
 	unsigned int id, lun;
 	unsigned long serial;
+	unsigned long flags;
 
 	if (!CMD_SP(cmd))
 		return FAILED;
@@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 
 	/* Check active list for command command. */
 	spin_unlock_irq(ha->host->host_lock);
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 		sp = ha->outstanding_cmds[i];
 
@@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		    sp->state));
 		DEBUG3(qla2x00_print_scsi_cmd(cmd);)
 
-		spin_unlock(&ha->hardware_lock);
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		if (qla2x00_abort_command(ha, sp)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			    "mbx failed.\n", __func__, ha->host_no));
@@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    "mbx success.\n", __func__, ha->host_no));
 			ret = SUCCESS;
 		}
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 
 		break;
 	}
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for the command to be returned. */
 	if (ret == SUCCESS) {
-		spin_unlock(&ha->hardware_lock);
 		if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 			qla_printk(KERN_ERR, ha, 
 			    "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 			    "%x.\n", ha->host_no, id, lun, serial, ret);
 		}
-		spin_lock(&ha->hardware_lock);
 	}
 	spin_lock_irq(ha->host->host_lock);
 
@@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 	int	status;
 	srb_t		*sp;
 	struct scsi_cmnd *cmd;
+	unsigned long flags;
 
 	status = 0;
 
@@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 	 * array
 	 */
 	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			cmd = sp->cmd;
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 			if (cmd->device->id == t) {
 				if (!qla2x00_eh_wait_on_command(ha, cmd)) {
 					status = 1;
@@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 				}
 			}
 		} else {
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		}
 	}
 	return (status);
@@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 	int	status;
 	srb_t		*sp;
 	struct scsi_cmnd *cmd;
+	unsigned long flags;
 
 	status = 1;
 
@@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 	 * array
 	 */
 	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			cmd = sp->cmd;
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 			status = qla2x00_eh_wait_on_command(ha, cmd);
 			if (status == 0)
 				break;
 		}
 		else {
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		}
 	}
 	return (status);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index cca7726..8d0d302 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
 	if (!starget)
 		return ERR_PTR(-ENOMEM);
 
+	get_device(&starget->dev);
 	down(&shost->scan_mutex);
 	res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
 	if (res != SCSI_SCAN_LUN_PRESENT)
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 5d2ceb6..1f98532 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port)
 		return "DSIU";
 	}
 
-	return "unknown";
+	return NULL;
 }
 
 static unsigned int siu_tx_empty(struct uart_port *port)
@@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	struct uart_port *port;
 	uint8_t iir, lsr;
 
-	if (dev_id == NULL)
-		return IRQ_NONE;
-
 	port = (struct uart_port *)dev_id;
 
 	iir = siu_read(port, UART_IIR);
@@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port)
 {
 	int retval;
 
+	if (port->membase == NULL)
+		return -ENODEV;
+
 	siu_clear_fifo(port);
 
 	(void)siu_read(port, UART_LSR);
@@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port)
 	unsigned long flags;
 	uint8_t lcr;
 
-	if (port->membase == NULL)
-		return;
-
 	siu_write(port, UART_IER, 0);
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -802,53 +799,6 @@ static int siu_init_ports(void)
 
 #ifdef CONFIG_SERIAL_VR41XX_CONSOLE
 
-static void early_set_termios(struct uart_port *port, struct termios *new,
-                              struct termios *old)
-{
-	tcflag_t c_cflag;
-	uint8_t lcr;
-	unsigned int baud, quot;
-
-	c_cflag = new->c_cflag;
-	switch (c_cflag & CSIZE) {
-	case CS5:
-		lcr = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		lcr = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		lcr = UART_LCR_WLEN7;
-		break;
-	default:
-		lcr = UART_LCR_WLEN8;
-		break;
-	}
-
-	if (c_cflag & CSTOPB)
-		lcr |= UART_LCR_STOP;
-	if (c_cflag & PARENB)
-		lcr |= UART_LCR_PARITY;
-	if ((c_cflag & PARODD) != PARODD)
-		lcr |= UART_LCR_EPAR;
-	if (c_cflag & CMSPAR)
-		lcr |= UART_LCR_SPAR;
-
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
-
-	siu_write(port, UART_DLL, (uint8_t)quot);
-	siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
-
-	siu_write(port, UART_LCR, lcr);
-}
-
-static struct uart_ops early_uart_ops = {
-	.set_termios	= early_set_termios,
-};
-
 #define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
 
 static void wait_for_xmitr(struct uart_port *port)
@@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options)
 	if (port->membase == NULL) {
 		if (port->mapbase == 0)
 			return -ENODEV;
-		port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
+		port->membase = ioremap(port->mapbase, siu_port_size(port));
 	}
 
 	vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
@@ -949,7 +899,7 @@ static int __devinit siu_console_init(void)
 
 	for (i = 0; i < num; i++) {
 		port = &siu_uart_ports[i];
-		port->ops = &early_uart_ops;
+		port->ops = &siu_uart_ops;
 	}
 
 	register_console(&siu_console);
@@ -994,8 +944,10 @@ static int siu_probe(struct device *dev)
 		port->dev = dev;
 
 		retval = uart_add_one_port(&siu_uart_driver, port);
-		if (retval)
+		if (retval < 0) {
+			port->dev = NULL;
 			break;
+		}
 	}
 
 	if (i == 0 && retval < 0) {
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4ab5000..4d0c9e6 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -290,32 +290,30 @@ static ssize_t show_modalias(struct device *dev, char *buf)
 {
 	struct usb_interface *intf;
 	struct usb_device *udev;
+	int len;
 
 	intf = to_usb_interface(dev);
 	udev = interface_to_usbdev(intf);
-	if (udev->descriptor.bDeviceClass == 0) {
-		struct usb_host_interface *alt = intf->cur_altsetting;
 
-		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n",
+	len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
 			       le16_to_cpu(udev->descriptor.idVendor),
 			       le16_to_cpu(udev->descriptor.idProduct),
 			       le16_to_cpu(udev->descriptor.bcdDevice),
 			       udev->descriptor.bDeviceClass,
 			       udev->descriptor.bDeviceSubClass,
-			       udev->descriptor.bDeviceProtocol,
+			       udev->descriptor.bDeviceProtocol);
+	buf += len;
+
+	if (udev->descriptor.bDeviceClass == 0) {
+		struct usb_host_interface *alt = intf->cur_altsetting;
+
+		return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
 			       alt->desc.bInterfaceClass,
 			       alt->desc.bInterfaceSubClass,
 			       alt->desc.bInterfaceProtocol);
  	} else {
-		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n",
-			       le16_to_cpu(udev->descriptor.idVendor),
-			       le16_to_cpu(udev->descriptor.idProduct),
-			       le16_to_cpu(udev->descriptor.bcdDevice),
-			       udev->descriptor.bDeviceClass,
-			       udev->descriptor.bDeviceSubClass,
-			       udev->descriptor.bDeviceProtocol);
+		return len + sprintf(buf, "*isc*ip*\n");
 	}
-
 }
 static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3196c32..19e598c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -124,3 +124,14 @@ config USB_SL811_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sl811-hcd.
 
+config USB_SL811_CS
+	tristate "CF/PCMCIA support for SL811HS HCD"
+	depends on USB_SL811_HCD && PCMCIA
+	default N
+	help
+	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called "sl811_cs".
+
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a574ca0..5dbd3e7 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
+obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a374b76..99d43f7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -2,8 +2,8 @@
  * SL811HS HCD (Host Controller Driver) for USB.
  *
  * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
- * Copyright (C) 2004 David Brownell
- * 
+ * Copyright (C) 2004-2005 David Brownell
+ *
  * Periodic scheduling is based on Roman's OHCI code
  * 	Copyright (C) 1999 Roman Weissgaerber
  *
@@ -15,7 +15,7 @@
  * For documentation, see the SL811HS spec and the "SL811HS Embedded Host"
  * document (providing significant pieces missing from that spec); plus
  * the SL811S spec if you want peripheral side info.
- */ 
+ */
 
 /*
  * Status:  Passed basic stress testing, works with hubs, mice, keyboards,
@@ -67,7 +67,7 @@
 MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION	"15 Dec 2004"
+#define DRIVER_VERSION	"19 May 2005"
 
 
 #ifndef DEBUG
@@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on)
 	/* reset as thoroughly as we can */
 	if (sl811->board && sl811->board->reset)
 		sl811->board->reset(hcd->self.controller);
+	else {
+		sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+		mdelay(20);
+	}
 
 	sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
 	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
@@ -443,6 +447,7 @@ static void finish_request(
 	spin_lock(&urb->lock);
 	if (urb->status == -EINPROGRESS)
 		urb->status = status;
+	urb->hcpriv = NULL;
 	spin_unlock(&urb->lock);
 
 	spin_unlock(&sl811->lock);
@@ -472,7 +477,7 @@ static void finish_request(
 		if (*prev)
 			*prev = ep->next;
 		sl811->load[i] -= ep->load;
-	}	
+	}
 	ep->branch = PERIODIC_SIZE;
 	sl811->periodic_count--;
 	sl811_to_hcd(sl811)->self.bandwidth_allocated
@@ -661,9 +666,9 @@ retry:
 
 #ifdef	QUIRK2
 	/* this may no longer be necessary ... */
-	if (irqstat == 0 && ret == IRQ_NONE) {
+	if (irqstat == 0) {
 		irqstat = checkdone(sl811);
-		if (irqstat /* && irq != ~0 */ )
+		if (irqstat)
 			sl811->stat_lost++;
 	}
 #endif
@@ -722,7 +727,8 @@ retry:
 		if (sl811->active_a) {
 			sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_a,
-				container_of(sl811->active_a->hep->urb_list.next,
+				container_of(sl811->active_a
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_a = NULL;
@@ -731,7 +737,8 @@ retry:
 		if (sl811->active_b) {
 			sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_b,
-				container_of(sl811->active_b->hep->urb_list.next,
+				container_of(sl811->active_b
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_b = NULL;
@@ -761,7 +768,7 @@ retry:
 			goto retry;
 	}
 
-	if (sl811->periodic_count == 0 && list_empty(&sl811->async)) 
+	if (sl811->periodic_count == 0 && list_empty(&sl811->async))
 		sofirq_off(sl811);
 	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
 
@@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load)
 			}
 			if (j < PERIODIC_SIZE)
 				continue;
-			branch = i; 
+			branch = i;
 		}
 	}
 	return branch;
@@ -890,6 +897,7 @@ static int sl811h_urb_enqueue(
 			break;
 		}
 
+		ep->hep = hep;
 		hep->hcpriv = ep;
 	}
 
@@ -961,15 +969,16 @@ fail:
 static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 {
 	struct sl811		*sl811 = hcd_to_sl811(hcd);
-	struct usb_host_endpoint *hep = urb->hcpriv;
+	struct usb_host_endpoint *hep;
 	unsigned long		flags;
 	struct sl811h_ep	*ep;
 	int			retval = 0;
 
+	spin_lock_irqsave(&sl811->lock, flags);
+	hep = urb->hcpriv;
 	if (!hep)
-		return -EINVAL;
+		goto fail;
 
-	spin_lock_irqsave(&sl811->lock, flags);
 	ep = hep->hcpriv;
 	if (ep) {
 		/* finish right away if this urb can't be active ...
@@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 			VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
 				(sl811->active_a == ep) ? "A" : "B");
 	} else
+fail:
 		retval = -EINVAL;
 	spin_unlock_irqrestore(&sl811->lock, flags);
 	return retval;
@@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd)
 	if (sl811->board && sl811->board->power)
 		hub_set_power_budget(udev, sl811->board->power * 2);
 
+	/* enable power and interupts */
+	port_power(sl811, 1);
+
 	return 0;
 }
 
@@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init_or_module
+static int __devexit
 sl811h_remove(struct device *dev)
 {
 	struct usb_hcd		*hcd = dev_get_drvdata(dev);
@@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev)
 	remove_debug_file(sl811);
 	usb_remove_hcd(hcd);
 
-	iounmap(sl811->data_reg);
+	/* some platforms may use IORESOURCE_IO */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->data_reg);
 
-	iounmap(sl811->addr_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->addr_reg);
 
 	usb_put_hcd(hcd);
 	return 0;
 }
 
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init
+static int __devinit
 sl811h_probe(struct device *dev)
 {
 	struct usb_hcd		*hcd;
@@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev)
 	void __iomem		*addr_reg;
 	void __iomem		*data_reg;
 	int			retval;
-	u8			tmp;
+	u8			tmp, ioaddr = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized these three resources and probably board
@@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev)
 	 * minimal sanity checking.
 	 */
 	pdev = container_of(dev, struct platform_device, dev);
-	if (pdev->num_resources < 3)
-		return -ENODEV;
-
-	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0)
+	if (pdev->num_resources < 3 || irq < 0)
 		return -ENODEV;
 
 	/* refuse to confuse usbcore */
@@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev)
 		return -EINVAL;
 	}
 
-	if (!request_mem_region(addr->start, 1, hcd_name)) {
-		retval = -EBUSY;
-		goto err1;
-	}
-	addr_reg = ioremap(addr->start, resource_len(addr));
-	if (addr_reg == NULL) {
-		retval = -ENOMEM;
-		goto err2;
-	}
+	/* the chip may be wired for either kind of addressing */
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	retval = -EBUSY;
+	if (!addr || !data) {
+		addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+		if (!addr || !data)
+			return -ENODEV;
+		ioaddr = 1;
+
+		addr_reg = (void __iomem *) addr->start;
+		data_reg = (void __iomem *) data->start;
+	} else {
+		addr_reg = ioremap(addr->start, 1);
+		if (addr_reg == NULL) {
+			retval = -ENOMEM;
+			goto err2;
+		}
 
-	if (!request_mem_region(data->start, 1, hcd_name)) {
-		retval = -EBUSY;
-		goto err3;
-	}
-	data_reg = ioremap(data->start, resource_len(addr));
-	if (data_reg == NULL) {
-		retval = -ENOMEM;
-		goto err4;
+		data_reg = ioremap(data->start, 1);
+		if (data_reg == NULL) {
+			retval = -ENOMEM;
+			goto err4;
+		}
 	}
 
 	/* allocate and initialize hcd */
@@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev)
 		goto err6;
 	}
 
-	/* sl811s would need a different handler for this irq */
-#ifdef	CONFIG_ARM
-	/* Cypress docs say the IRQ is IRQT_HIGH ... */
-	set_irq_type(irq, IRQT_RISING);
-#endif
-	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+	/* The chip's IRQ is level triggered, active high.  A requirement
+	 * for platform device setup is to cope with things like signal
+	 * inverters (e.g. CF is active low) or working only with edge
+	 * triggers (e.g. most ARM CPUs).  Initial driver stress testing
+	 * was on a system with single edge triggering, so most sorts of
+	 * triggering arrangement should work.
+	 */
+	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
 	if (retval != 0)
 		goto err6;
 
@@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev)
  err6:
 	usb_put_hcd(hcd);
  err5:
-	iounmap(data_reg);
+	if (!ioaddr)
+		iounmap(data_reg);
  err4:
-	release_mem_region(data->start, 1);
- err3:
-	iounmap(addr_reg);
+	if (!ioaddr)
+		iounmap(addr_reg);
  err2:
-	release_mem_region(addr->start, 1);
- err1:
 	DBG("init error, %d\n", retval);
 	return retval;
 }
@@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev)
 #ifdef	CONFIG_PM
 
 /* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls 
+ * and its root hub, except that the root hub only gets direct PM calls
  * when CONFIG_USB_SUSPEND is enabled.
  */
 
@@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase)
 #endif
 
 
-static struct device_driver sl811h_driver = {
+/* this driver is exported so sl811_cs can depend on it */
+struct device_driver sl811h_driver = {
 	.name =		(char *) hcd_name,
 	.bus =		&platform_bus_type,
 
 	.probe =	sl811h_probe,
-	.remove =	sl811h_remove,
+	.remove =	__devexit_p(sl811h_remove),
 
 	.suspend =	sl811h_suspend,
 	.resume =	sl811h_resume,
 };
+EXPORT_SYMBOL(sl811h_driver);
 
 /*-------------------------------------------------------------------------*/
- 
-static int __init sl811h_init(void) 
+
+static int __init sl811h_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;
@@ -1844,8 +1860,8 @@ static int __init sl811h_init(void)
 }
 module_init(sl811h_init);
 
-static void __exit sl811h_cleanup(void) 
-{	
+static void __exit sl811h_cleanup(void)
+{
 	driver_unregister(&sl811h_driver);
 }
 module_exit(sl811h_cleanup);
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
new file mode 100644
index 0000000..6e17326
--- /dev/null
+++ b/drivers/usb/host/sl811_cs.c
@@ -0,0 +1,442 @@
+/*
+ * PCMCIA driver for SL811HS (as found in REX-CFU1U)
+ * Filename: sl811_cs.c
+ * Author:   Yukio Yamamoto
+ *
+ *  Port to sl811-hcd and 2.6.x by
+ *    Botond Botyanszki <boti@rocketmail.com>
+ *    Simon Pickering
+ *
+ *  Last update: 2005-05-12
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <linux/usb_sl811.h>
+
+MODULE_AUTHOR("Botond Botyanszki");
+MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
+MODULE_LICENSE("GPL");
+
+
+/*====================================================================*/
+/* MACROS                                                             */
+/*====================================================================*/
+
+#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG)
+
+static int pc_debug = 0;
+module_param(pc_debug, int, 0644);
+
+#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
+
+#else
+#define DBG(n, args...) do{}while(0)
+#endif	/* no debugging */
+
+#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
+
+#define CS_CHECK(fn, ret) \
+	do { \
+		last_fn = (fn); \
+		if ((last_ret = (ret)) != 0) \
+			goto cs_failed; \
+	} while (0)
+
+/*====================================================================*/
+/* VARIABLES                                                          */
+/*====================================================================*/
+
+static const char driver_name[DEV_NAME_LEN]  = "sl811_cs";
+
+static dev_link_t *dev_list = NULL;
+
+static int irq_list[4] = { -1 };
+static int irq_list_count;
+
+module_param_array(irq_list, int, &irq_list_count, 0444);
+
+INT_MODULE_PARM(irq_mask, 0xdeb8);
+
+typedef struct local_info_t {
+	dev_link_t		link;
+	dev_node_t		node;
+} local_info_t;
+
+/*====================================================================*/
+
+static void release_platform_dev(struct device * dev)
+{
+	DBG(0, "sl811_cs platform_dev release\n");
+	dev->parent = NULL;
+}
+
+static struct sl811_platform_data platform_data = {
+	.potpg		= 100,
+	.power		= 50,		/* == 100mA */
+	// .reset	= ... FIXME:  invoke CF reset on the card
+};
+
+static struct resource resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		// .name   = "address",
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		// .name   = "data",
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+extern struct device_driver sl811h_driver;
+
+static struct platform_device platform_dev = {
+	.id			= -1,
+	.dev = {
+		.platform_data = &platform_data,
+		.release       = release_platform_dev,
+	},
+	.resource		= resources,
+	.num_resources		= ARRAY_SIZE(resources),
+};
+
+static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+{
+	if (platform_dev.dev.parent)
+		return -EBUSY;
+	platform_dev.dev.parent = parent;
+
+	/* finish seting up the platform device */
+	resources[0].start = irq;
+
+	resources[1].start = base_addr;
+	resources[1].end = base_addr;
+
+	resources[2].start = base_addr + 1;
+	resources[2].end   = base_addr + 1;
+
+	/* The driver core will probe for us.  We know sl811-hcd has been
+	 * initialized already because of the link order dependency.
+	 */
+	platform_dev.name = sl811h_driver.name;
+	return platform_device_register(&platform_dev);
+}
+
+/*====================================================================*/
+
+static void sl811_cs_detach(dev_link_t *link)
+{
+	dev_link_t **linkp;
+
+	DBG(0, "sl811_cs_detach(0x%p)\n", link);
+
+	/* Locate device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
+		if (*linkp == link)
+			break;
+	}
+	if (*linkp == NULL)
+		return;
+
+	/* Break the link with Card Services */
+	if (link->handle)
+		pcmcia_deregister_client(link->handle);
+
+	/* Unlink device structure, and free it */
+	*linkp = link->next;
+	/* This points to the parent local_info_t struct */
+	kfree(link->priv);
+}
+
+static void sl811_cs_release(dev_link_t * link)
+{
+
+	DBG(0, "sl811_cs_release(0x%p)\n", link);
+
+	if (link->open) {
+		DBG(1, "sl811_cs: release postponed, '%s' still open\n",
+		    link->dev->dev_name);
+		link->state |= DEV_STALE_CONFIG;
+		return;
+	}
+
+	/* Unlink the device chain */
+	link->dev = NULL;
+
+	platform_device_unregister(&platform_dev);
+	pcmcia_release_configuration(link->handle);
+	if (link->io.NumPorts1)
+		pcmcia_release_io(link->handle, &link->io);
+	if (link->irq.AssignedIRQ)
+		pcmcia_release_irq(link->handle, &link->irq);
+	link->state &= ~DEV_CONFIG;
+
+	if (link->state & DEV_STALE_LINK)
+		sl811_cs_detach(link);
+}
+
+static void sl811_cs_config(dev_link_t *link)
+{
+	client_handle_t		handle = link->handle;
+	struct device		*parent = &handle_to_dev(handle);
+	local_info_t		*dev = link->priv;
+	tuple_t			tuple;
+	cisparse_t		parse;
+	int			last_fn, last_ret;
+	u_char			buf[64];
+	config_info_t		conf;
+	cistpl_cftable_entry_t	dflt = { 0 };
+
+	DBG(0, "sl811_cs_config(0x%p)\n", link);
+
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	/* Look up the current Vcc */
+	CS_CHECK(GetConfigurationInfo,
+			pcmcia_get_configuration_info(handle, &conf));
+	link->conf.Vcc = conf.Vcc;
+
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	while (1) {
+		cistpl_cftable_entry_t	*cfg = &(parse.cftable_entry);
+
+		if (pcmcia_get_tuple_data(handle, &tuple) != 0
+				|| pcmcia_parse_tuple(handle, &tuple, &parse)
+						!= 0)
+			goto next_entry;
+
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
+			dflt = *cfg;
+		}
+
+		if (cfg->index == 0)
+			goto next_entry;
+
+		link->conf.ConfigIndex = cfg->index;
+
+		/* Use power settings for Vcc and Vpp if present */
+		/*  Note that the CIS values need to be rescaled */
+		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
+					!= conf.Vcc)
+				goto next_entry;
+		} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
+					!= conf.Vcc)
+				goto next_entry;
+		}
+
+		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+		/* we need an interrupt */
+		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+			link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+		/* IO window settings */
+		link->io.NumPorts1 = link->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+			link->io.BasePort1 = io->win[0].base;
+			link->io.NumPorts1 = io->win[0].len;
+
+			if (pcmcia_request_io(link->handle, &link->io) != 0)
+				goto next_entry;
+		}
+		break;
+
+next_entry:
+		if (link->io.NumPorts1)
+			pcmcia_release_io(link->handle, &link->io);
+		last_ret = pcmcia_get_next_tuple(handle, &tuple);
+	}
+
+	/* require an IRQ and two registers */
+	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
+		goto cs_failed;
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+		CS_CHECK(RequestIRQ,
+			pcmcia_request_irq(link->handle, &link->irq));
+	else
+		goto cs_failed;
+
+	CS_CHECK(RequestConfiguration,
+		pcmcia_request_configuration(link->handle, &link->conf));
+
+	sprintf(dev->node.dev_name, driver_name);
+	dev->node.major = dev->node.minor = 0;
+	link->dev = &dev->node;
+
+	printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+	       dev->node.dev_name, link->conf.ConfigIndex,
+	       link->conf.Vcc/10, link->conf.Vcc%10);
+	if (link->conf.Vpp1)
+		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+	printk(", irq %d", link->irq.AssignedIRQ);
+	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+	       link->io.BasePort1+link->io.NumPorts1-1);
+	printk("\n");
+
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
+			< 0) {
+cs_failed:
+		printk("sl811_cs_config failed\n");
+		cs_error(link->handle, last_fn, last_ret);
+		sl811_cs_release(link);
+		link->state &= ~DEV_CONFIG_PENDING;
+	}
+}
+
+static int
+sl811_cs_event(event_t event, int priority, event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+
+	DBG(1, "sl811_cs_event(0x%06x)\n", event);
+
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG)
+			sl811_cs_release(link);
+		break;
+
+	case CS_EVENT_CARD_INSERTION:
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		sl811_cs_config(link);
+		break;
+
+	case CS_EVENT_PM_SUSPEND:
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		if (link->state & DEV_CONFIG)
+			pcmcia_release_configuration(link->handle);
+		break;
+
+	case CS_EVENT_PM_RESUME:
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		if (link->state & DEV_CONFIG)
+			pcmcia_request_configuration(link->handle, &link->conf);
+		DBG(0, "reset sl811-hcd here?\n");
+		break;
+	}
+	return 0;
+}
+
+static dev_link_t *sl811_cs_attach(void)
+{
+	local_info_t *local;
+	dev_link_t *link;
+	client_reg_t client_reg;
+	int ret, i;
+
+	local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+	if (!local)
+		return NULL;
+	memset(local, 0, sizeof(local_info_t));
+	link = &local->link;
+	link->priv = local;
+
+	/* Initialize */
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
+	if (irq_list[0] == -1)
+		link->irq.IRQInfo2 = irq_mask;
+	else
+		for (i = 0; i < irq_list_count; i++)
+			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.Handler = NULL;
+
+	link->conf.Attributes = 0;
+	link->conf.Vcc = 33;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	/* Register with Card Services */
+	link->next = dev_list;
+	dev_list = link;
+	client_reg.dev_info = (dev_info_t *) &driver_name;
+	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+	client_reg.EventMask =
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &sl811_cs_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != CS_SUCCESS) {
+		cs_error(link->handle, RegisterClient, ret);
+		sl811_cs_detach(link);
+		return NULL;
+	}
+
+	return link;
+}
+
+static struct pcmcia_driver sl811_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= (char *)driver_name,
+	},
+	.attach		= sl811_cs_attach,
+	.detach		= sl811_cs_detach,
+};
+
+/*====================================================================*/
+
+static int __init init_sl811_cs(void)
+{
+	return pcmcia_register_driver(&sl811_cs_driver);
+}
+module_init(init_sl811_cs);
+
+static void __exit exit_sl811_cs(void)
+{
+	pcmcia_unregister_driver(&sl811_cs_driver);
+}
+module_exit(exit_sl811_cs);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 43215a9..96959ec 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1318,6 +1318,8 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_WACOM_INTUOS2	0x0040
 #define USB_DEVICE_ID_WACOM_VOLITO	0x0060
 #define USB_DEVICE_ID_WACOM_PTU		0x0003
+#define USB_DEVICE_ID_WACOM_INTUOS3	0x00B0
+#define USB_DEVICE_ID_WACOM_CINTIQ	0x003F
 
 #define USB_VENDOR_ID_KBGEAR		0x084e
 #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO	0x1001
@@ -1404,6 +1406,7 @@ void hid_init_reports(struct hid_device *hid)
 
 #define USB_VENDOR_ID_DELORME		0x1163
 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
+#define USB_DEVICE_ID_DELORME_EM_LT20	0x0200
 
 #define USB_VENDOR_ID_MCC		0x09db
 #define USB_DEVICE_ID_MCC_PMD1024LS	0x0076
@@ -1415,6 +1418,12 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_BTC		0x046e
 #define USB_DEVICE_ID_BTC_KEYBOARD	0x5303
 
+#define USB_VENDOR_ID_VERNIER		0x08f7
+#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
+#define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
+#define USB_DEVICE_ID_VERNIER_SKIP	0x0003
+#define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
+
 
 /*
  * Alphabetically sorted blacklist by quirk type.
@@ -1440,6 +1449,7 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
@@ -1459,6 +1469,10 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
@@ -1484,6 +1498,10 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 
diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog
deleted file mode 100644
index b2eb71a..0000000
--- a/drivers/usb/media/pwc/ChangeLog
+++ /dev/null
@@ -1,143 +0,0 @@
-9.0.2
-
-* Adding #ifdef to compile PWC before and after 2.6.5
-
-9.0.1
-
-9.0
-
-
-8.12
-
-* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
-
-8.11.1
-
-* Fix for PCVC720/40, would not be able to set videomode
-* Fix for Samsung MPC models, appearantly they are based on a newer chipset
-
-8.11
-
-* 20 dev_hints (per request)
-* Hot unplugging should be better, no more dangling pointers or memory leaks
-* Added reserved Logitech webcam IDs
-* Device now remembers size & fps between close()/open()
-* Removed palette stuff altogether
-
-8.10.1
-
-* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
-
-8.10
-
-* Fixed ID for QuickCam Notebook pro
-* Added GREALSIZE ioctl() call
-* Fixed bug in case PWCX was not loaded and invalid size was set
-
-8.9
-
-* Merging with kernel 2.5.49
-* Adding IDs for QuickCam Zoom & QuickCam Notebook
-
-8.8
-
-* Fixing 'leds' parameter
-* Adding IDs for Logitech QuickCam Pro 4000
-* Making URB init/cleanup a little nicer
-
-8.7
-
-* Incorporating changes in ioctl() parameter passing
-* Also changes to URB mechanism
-
-8.6
-
-* Added ID's for Visionite VCS UM100 and UC300
-* Removed YUV420-interlaced palette altogether (was confusing)
-* Removed MIRROR stuff as it didn't work anyway
-* Fixed a problem with the 'leds' parameter (wouldn't blink)
-* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
-  CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
-* VIDIOCGCAP.name now contains real camera model name instead of
-  'Philips xxx webcam'
-* Added PROBE ioctl (see previous point & API doc)
-
-8.5
-
-* Adding IDs for Creative Labs Webcam 5
-* Adding IDs for SOTEC CMS-001 webcam
-* Solving possible hang in VIDIOCSYNC when unplugging the cam 
-* Forgot to return structure in VIDIOCPWCGAWB, oops
-* Time interval for the LEDs are now in milliseconds
-
-8.4
-
-* Fixing power_save option for Vesta range
-* Handling new error codes in ISOC callback
-* Adding dev_hint module parameter, to specify /dev/videoX device nodes
-
-8.3
-
-* Adding Samsung C10 and C30 cameras
-* Removing palette module parameter
-* Fixed typo in ID of QuickCam 3000 Pro
-* Adding LED settings (blinking while in use) for ToUCam cameras.
-* Turns LED off when camera is not in use.
-
-8.2
-
-* Making module more silent when trace = 0 
-* Adding QuickCam 3000 Pro IDs
-* Chrominance control for the Vesta cameras
-* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
-* Included Oliver Neukem's lock_kernel() patch
-* Allocates less memory for image buffers
-* Adds ioctl()s for the whitebalancing
-
-8.1
-
-* Adding support for 750
-* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
-
-8.0
-* 'damage control' after inclusion in 2.4.5.
-* Changed wait-queue mechanism in read/mmap/poll according to the book.
-* Included YUV420P palette.
-* Changed interface to decompressor module.
-* Cleaned up pwc structure a bit.
-
-7.0
-
-* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
-* There is now a clear error message when an image size is selected that
-  is only supported using the decompressor, and the decompressor isn't
-  loaded.
-* When the decompressor wasn't loaded, selecting large image size
-  would create skewed or double images.
-
-6.3
-
-* Introduced spinlocks for the buffer pointer manipulation; a number of
-  reports seem to suggest the down()/up() semaphores were the cause of
-  lockups, since they are not suitable for interrupt/user locking.
-* Separated decompressor and core code into 2 modules.
-
-6.2
-
-* Non-integral image sizes are now padded with gray or black.
-* Added SHUTTERSPEED ioctl().
-* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
-  even though the call succeeded.
-* Added hotplug support for 2.4.*.
-* Memory: the 645/646 uses less memory now.
-
-6.1
-
-* VIDIOCSPICT returns -EINVAL with invalid palettes.
-* Added saturation control.
-* Split decompressors from rest.
-* Fixed bug that would reset the framerate to the default framerate if 
-  the rate field was set to 0 (which is not what I intended, nl. do not 
-  change the framerate!).
-* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
-* Workaround for a bug in the 730 sensor.
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 85476e7..4cbb408 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf)
 			}
 			/* expect bcdVersion 1.0, ignore */
 			if (memcmp(&desc->bGUID, blan_guid, 16)
-				    && memcmp(&desc->bGUID, blan_guid, 16) ) {
+				    && memcmp(&desc->bGUID, safe_guid, 16) ) {
 				/* hey, this one might _really_ be MDLM! */
 				dev_dbg (&intf->dev, "MDLM guid\n");
 				goto bad_desc;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bc798ed..9438909 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_OPTION
+	tristate "USB Option PCMCIA serial driver"
+	depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
+	help
+	  Say Y here if you want to use an Option card. This is a
+	  GSM card, controlled by three serial ports which are connected
+	  via an OHCI adapter located on a PC card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called option.
+
 config USB_SERIAL_OMNINET
 	tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index d56ff6d..6c7cdcc 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
 obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
 obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7e9bb63..4ace996 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -7,6 +7,14 @@
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ * Outstanding Issues:
+ *  Buffers are not flushed when the port is opened.
+ *  Multiple calls to write() may fail with "Resource temporarily unavailable"
+ *
  */
 
 #include <linux/config.h>
@@ -24,7 +32,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.03"
+#define DRIVER_VERSION "v0.04"
 #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
 
 /*
@@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*);
 static void cp2101_close(struct usb_serial_port*, struct file*);
 static void cp2101_get_termios(struct usb_serial_port*);
 static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
+static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+		unsigned int, unsigned int);
 static void cp2101_break_ctl(struct usb_serial_port*, int);
 static int cp2101_startup (struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial*);
@@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*);
 static int debug;
 
 static struct usb_device_id id_table [] = {
-	{USB_DEVICE(0x10c4, 0xea60) },	/*Silicon labs factory default*/
-	{USB_DEVICE(0x10ab, 0x10c5) },	/*Siemens MC60 Cable*/
-	{ } /* Terminating Entry*/
+	{ USB_DEVICE(0x10C4, 0xEA60) },	/* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0x80CA) },	/* Degree Controls Inc */
+	{ USB_DEVICE(0x10AB, 0x10C5) },	/* Siemens MC60 Cable */
+	{ } /* Terminating Entry */
 };
 
 MODULE_DEVICE_TABLE (usb, id_table);
@@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = {
 	.close			= cp2101_close,
 	.break_ctl		= cp2101_break_ctl,
 	.set_termios		= cp2101_set_termios,
+	.tiocmget 		= cp2101_tiocmget,
+	.tiocmset		= cp2101_tiocmset,
 	.attach			= cp2101_startup,
 	.shutdown		= cp2101_shutdown,
 };
 
-/*Config request types*/
+/* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
 
-/*Config SET requests. To GET, add 1 to the request number*/
-#define CP2101_UART 		0x00	/*Enable / Disable*/
-#define CP2101_BAUDRATE		0x01	/*(BAUD_RATE_GEN_FREQ / baudrate)*/
-#define CP2101_BITS		0x03	/*0x(0)(data bits)(parity)(stop bits)*/
-#define CP2101_BREAK		0x05	/*On / Off*/
-#define CP2101_DTRRTS		0x07	/*101 / 202  ???*/
-#define CP2101_CONFIG_16	0x13	/*16 bytes of config data ???*/
-#define CP2101_CONFIG_6		0x19	/*6 bytes of config data ???*/
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 		0x00	/* Enable / Disable */
+#define CP2101_BAUDRATE		0x01	/* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS		0x03	/* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK		0x05	/* On / Off */
+#define CP2101_CONTROL		0x07	/* Flow control line states */
+#define CP2101_MODEMCTL		0x13	/* Modem controls */
+#define CP2101_CONFIG_6		0x19	/* 6 bytes of config data ??? */
 
-/*CP2101_UART*/
+/* CP2101_UART */
 #define UART_ENABLE		0x0001
 #define UART_DISABLE		0x0000
 
-/*CP2101_BAUDRATE*/
+/* CP2101_BAUDRATE */
 #define BAUD_RATE_GEN_FREQ	0x384000
 
-/*CP2101_BITS*/
+/* CP2101_BITS */
 #define BITS_DATA_MASK		0X0f00
+#define BITS_DATA_5		0X0500
 #define BITS_DATA_6		0X0600
 #define BITS_DATA_7		0X0700
 #define BITS_DATA_8		0X0800
@@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = {
 #define BITS_STOP_1		0x0000
 #define BITS_STOP_1_5		0x0001
 #define BITS_STOP_2		0x0002
+
+/* CP2101_BREAK */
 #define BREAK_ON		0x0000
 #define BREAK_OFF		0x0001
 
+/* CP2101_CONTROL */
+#define CONTROL_DTR		0x0001
+#define CONTROL_RTS		0x0002
+#define CONTROL_CTS		0x0010
+#define CONTROL_DSR		0x0020
+#define CONTROL_RING		0x0040
+#define CONTROL_DCD		0x0080
+#define CONTROL_WRITE_DTR	0x0100
+#define CONTROL_WRITE_RTS	0x0200
 
-static int cp2101_get_config(struct usb_serial_port* port, u8 request)
+/*
+ * cp2101_get_config
+ * Reads from the CP2101 configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	unsigned char buf[4];
-	unsigned int value;
-	int result, i;
+	u32 *buf;
+	int result, i, length;
+
+	/* Number of integers required to contain the array */
+	length = (((size - 1) | 3) + 1)/4;
+
+	buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
+	memset(buf, 0, length * sizeof(u32));
+
+	if (!buf) {
+		dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+		return -ENOMEM;
+	}
 
-	/*For get requests, the request number must be incremented*/
+	/* For get requests, the request number must be incremented */
 	request++;
 
-	/*Issue the request, attempting to read 4 bytes*/
+	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, 4, 300);
+				0, buf, size, 300);
 
-	if (result < 0) {
-		dev_err(&port->dev, "%s - Unable to send config request, "
-				"request=0x%x result=%d\n",
-				__FUNCTION__, request, result);
-		return result;
-	}
+	/* Convert data into an array of integers */
+	for (i=0; i<length; i++)
+		data[i] = le32_to_cpu(buf[i]);
 
-	/*Assemble each byte read into an integer value*/
-	value = 0;
-	for (i=0; i<4 && i<result; i++)
-		value |= (buf[i] << (i * 8));
+	kfree(buf);
 
-	dbg( " %s - request=0x%x result=%d value=0x%x",
-			__FUNCTION__, request, result, value);
+	if (result != size) {
+		dev_err(&port->dev, "%s - Unable to send config request, "
+				"request=0x%x size=%d result=%d\n",
+				__FUNCTION__, request, size, result);
+		return -EPROTO;
+	}
 
-	return value;
+	return 0;
 }
 
-static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
+/*
+ * cp2101_set_config
+ * Writes to the CP2101 configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	int result;
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			request, REQTYPE_HOST_TO_DEVICE, value,
-			0, NULL, 0, 300);
+	u32 *buf;
+	int result, i, length;
 
-	if (result <0) {
-		dev_err(&port->dev, "%s - Unable to send config request, "
-				"request=0x%x value=0x%x result=%d\n",
-				__FUNCTION__, request, value, result);
-		return result;
+	/* Number of integers required to contain the array */
+	length = (((size - 1) | 3) + 1)/4;
+
+	buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+	if (!buf) {
+		dev_err(&port->dev, "%s - out of memory.\n",
+				__FUNCTION__);
+		return -ENOMEM;
+	}
+
+	/* Array of integers into bytes */
+	for (i = 0; i < length; i++)
+		buf[i] = cpu_to_le32(data[i]);
+
+	if (size > 2) {
+		result = usb_control_msg (serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+				0, buf, size, 300);
+	} else {
+		result = usb_control_msg (serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				request, REQTYPE_HOST_TO_DEVICE, data[0],
+				0, NULL, 0, 300);
 	}
 
-	dbg(" %s - request=0x%x value=0x%x result=%d",
-			__FUNCTION__, request, value, result);
+	kfree(buf);
+
+	if ((size > 2 && result != size) || result < 0) {
+		dev_err(&port->dev, "%s - Unable to send request, "
+				"request=0x%x size=%d result=%d\n",
+				__FUNCTION__, request, size, result);
+		return -EPROTO;
+	}
 
+	/* Single data value */
+	result = usb_control_msg (serial->dev,
+			usb_sndctrlpipe(serial->dev, 0),
+			request, REQTYPE_HOST_TO_DEVICE, data[0],
+			0, NULL, 0, 300);
 	return 0;
 }
 
+/*
+ * cp2101_set_config_single
+ * Convenience function for calling cp2101_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp2101_set_config_single(struct usb_serial_port* port,
+		u8 request, unsigned int data)
+{
+	return cp2101_set_config(port, request, &data, 2);
+}
+
 static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
+	if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n",
 				__FUNCTION__);
 		return -EPROTO;
@@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 		return result;
 	}
 
-	/*Configure the termios structure*/
+	/* Configure the termios structure */
 	cp2101_get_termios(port);
 
+	/* Set the DTR and RTS pins low */
+	cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
 	return 0;
 }
 
@@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	cp2101_set_config(port, CP2101_UART, UART_DISABLE);
+	cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
 }
 
-/* cp2101_get_termios*/
-/* Reads the baud rate, data bits, parity and stop bits from the device*/
-/* Corrects any unsupported values*/
-/* Configures the termios structure to reflect the state of the device*/
+/*
+ * cp2101_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
 static void cp2101_get_termios (struct usb_serial_port *port)
 {
-	unsigned int cflag;
+	unsigned int cflag, modem_ctl[4];
 	int baud;
 	int bits;
 
@@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 	}
 	cflag = port->tty->termios->c_cflag;
 
-	baud = cp2101_get_config(port, CP2101_BAUDRATE);
-	/*Convert to baudrate*/
+	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+	/* Convert to baudrate */
 	if (baud)
 		baud = BAUD_RATE_GEN_FREQ / baud;
 
 	dbg("%s - baud rate = %d", __FUNCTION__, baud);
 	cflag &= ~CBAUD;
 	switch (baud) {
-		/* The baud rates which are commented out below
+		/*
+		 * The baud rates which are commented out below
 		 * appear to be supported by the device
 		 * but are non-standard
 		 */
@@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			dbg("%s - Baud rate is not supported, "
 					"using 9600 baud", __FUNCTION__);
 			cflag |= B9600;
-			cp2101_set_config(port, CP2101_BAUDRATE,
+			cp2101_set_config_single(port, CP2101_BAUDRATE,
 					(BAUD_RATE_GEN_FREQ/9600));
 			break;
 	}
 
-	bits = cp2101_get_config(port, CP2101_BITS);
+	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
 	switch(bits & BITS_DATA_MASK) {
+		case BITS_DATA_5:
+			dbg("%s - data bits = 5", __FUNCTION__);
+			cflag |= CS5;
+			break;
 		case BITS_DATA_6:
 			dbg("%s - data bits = 6", __FUNCTION__);
 			cflag |= CS6;
@@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			cflag |= CS8;
 			bits &= ~BITS_DATA_MASK;
 			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		default:
 			dbg("%s - Unknown number of data bits, "
@@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			cflag |= CS8;
 			bits &= ~BITS_DATA_MASK;
 			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
@@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 					"disabling parity)", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		case BITS_PARITY_SPACE:
 			dbg("%s - parity = SPACE (not supported, "
 					"disabling parity)", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		default:
 			dbg("%s - Unknown parity mode, "
 					"disabling parity", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
@@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			break;
 		case BITS_STOP_1_5:
 			dbg("%s - stop bits = 1.5 (not supported, "
-					"using 1 stop bit", __FUNCTION__);
+					"using 1 stop bit)", __FUNCTION__);
 			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		case BITS_STOP_2:
 			dbg("%s - stop bits = 2", __FUNCTION__);
@@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			dbg("%s - Unknown number of stop bits, "
 					"using 1 stop bit", __FUNCTION__);
 			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
+	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	if (modem_ctl[0] & 0x0008) {
+		dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+		cflag |= CRTSCTS;
+	} else {
+		dbg("%s - flow control = NONE", __FUNCTION__);
+		cflag &= ~CRTSCTS;
+	}
+
 	port->tty->termios->c_cflag = cflag;
 }
 
@@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		struct termios *old_termios)
 {
 	unsigned int cflag, old_cflag=0;
-	int baud=0;
-	int bits;
+	int baud=0, bits;
+	unsigned int modem_ctl[4];
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 	}
 	cflag = port->tty->termios->c_cflag;
 
-	/* check that they really want us to change something */
+	/* Check that they really want us to change something */
 	if (old_termios) {
 		if ((cflag == old_termios->c_cflag) &&
 				(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 	/* If the baud rate is to be updated*/
 	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
 		switch (cflag & CBAUD) {
-			/* The baud rates which are commented out below
+			/*
+			 * The baud rates which are commented out below
 			 * appear to be supported by the device
 			 * but are non-standard
 			 */
@@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		if (baud) {
 			dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
 					baud);
-			if (cp2101_set_config(port, CP2101_BAUDRATE,
+			if (cp2101_set_config_single(port, CP2101_BAUDRATE,
 						(BAUD_RATE_GEN_FREQ / baud)))
 				dev_err(&port->dev, "Baud rate requested not "
 						"supported by device\n");
 		}
 	}
 
-	/*If the number of data bits is to be updated*/
+	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
+			case CS5:
+				bits |= BITS_DATA_5;
+				dbg("%s - data bits = 5", __FUNCTION__);
+				break;
 			case CS6:
 				bits |= BITS_DATA_6;
 				dbg("%s - data bits = 6", __FUNCTION__);
@@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 				bits |= BITS_DATA_8;
 				break;
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Number of data bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & PARODD) {
@@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 				dbg("%s - parity = EVEN", __FUNCTION__);
 			}
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Parity mode not supported "
 					"by device\n");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 			bits |= BITS_STOP_1;
 			dbg("%s - stop bits = 1", __FUNCTION__);
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Number of stop bits requested "
 					"not supported by device\n");
 	}
+
+	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+				__FUNCTION__, modem_ctl[0], modem_ctl[1],
+				modem_ctl[2], modem_ctl[3]);
+
+		if (cflag & CRTSCTS) {
+			modem_ctl[0] &= ~0x7B;
+			modem_ctl[0] |= 0x09;
+			modem_ctl[1] = 0x80;
+			dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+		} else {
+			modem_ctl[0] &= ~0x7B;
+			modem_ctl[0] |= 0x01;
+			modem_ctl[1] |= 0x40;
+			dbg("%s - flow control = NONE", __FUNCTION__);
+		}
+
+		dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+				__FUNCTION__, modem_ctl[0], modem_ctl[1],
+				modem_ctl[2], modem_ctl[3]);
+		cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	}
+
+}
+
+static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+		unsigned int set, unsigned int clear)
+{
+	int control = 0;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if (set & TIOCM_RTS) {
+		control |= CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (set & TIOCM_DTR) {
+		control |= CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+	if (clear & TIOCM_RTS) {
+		control &= ~CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (clear & TIOCM_DTR) {
+		control &= ~CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+
+	dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+{
+	int control, result;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+
+	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+		|((control & CONTROL_RING)? TIOCM_RI  : 0)
+		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);
+
+	dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+	return result;
 }
 
 static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
 {
-	u16 state;
+	int state;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 	if (break_state == 0)
@@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __FUNCTION__,
 			state==BREAK_OFF ? "off" : "on");
-	cp2101_set_config(port, CP2101_BREAK, state);
+	cp2101_set_config(port, CP2101_BREAK, &state, 2);
 }
 
 static int cp2101_startup (struct usb_serial *serial)
 {
-	/*CP2101 buffers behave strangely unless device is reset*/
+	/* CP2101 buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
@@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial)
 
 	dbg("%s", __FUNCTION__);
 
-	/* stop reads and writes on all ports */
+	/* Stop reads and writes on all ports */
 	for (i=0; i < serial->num_ports; ++i) {
 		cp2101_cleanup(serial->port[i]);
 	}
@@ -560,16 +747,16 @@ static int __init cp2101_init (void)
 
 	retval = usb_serial_register(&cp2101_device);
 	if (retval)
-		return retval; /*Failed to register*/
+		return retval; /* Failed to register */
 
 	retval = usb_register(&cp2101_driver);
 	if (retval) {
-		/*Failed to register*/
+		/* Failed to register */
 		usb_serial_deregister(&cp2101_device);
 		return retval;
 	}
 
-	/*Success*/
+	/* Success */
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
 }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 52394f0..051c3a7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
@@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a52bb13..8866376 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -144,6 +144,8 @@
 
 /* ELV USB Module UO100 (PID sent by Stefan Frings) */
 #define FTDI_ELV_UO100_PID	0xFB58	/* Product Id */
+/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* Product Id */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 0000000..b722175
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,729 @@
+/*
+  Option Card (PCMCIA to) USB to Serial Driver
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  This driver is free software; you can redistribute it and/or modify
+  it under the terms of Version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History:
+
+  2005-05-19  v0.1   Initial version, based on incomplete docs
+                     and analysis of misbehavior of the standard driver
+  2005-05-20  v0.2   Extended the input buffer to avoid losing
+                     random 64-byte chunks of data
+  2005-05-21  v0.3   implemented chars_in_buffer()
+                     turned on low_latency
+                     simplified the code somewhat
+*/
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+/* Function prototypes */
+static int  option_open (struct usb_serial_port *port, struct file *filp);
+static void option_close (struct usb_serial_port *port, struct file *filp);
+static int  option_startup (struct usb_serial *serial);
+static void option_shutdown (struct usb_serial *serial);
+static void option_rx_throttle (struct usb_serial_port *port);
+static void option_rx_unthrottle (struct usb_serial_port *port);
+static int  option_write_room (struct usb_serial_port *port);
+
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
+
+
+static int  option_write (struct usb_serial_port *port,
+                          const unsigned char *buf, int count);
+
+static int  option_chars_in_buffer (struct usb_serial_port *port);
+static int  option_ioctl (struct usb_serial_port *port, struct file *file,
+                          unsigned int cmd, unsigned long arg);
+static void option_set_termios (struct usb_serial_port *port,
+                                struct termios *old);
+static void option_break_ctl (struct usb_serial_port *port, int break_state);
+static int  option_tiocmget (struct usb_serial_port *port, struct file *file);
+static int  option_tiocmset (struct usb_serial_port *port, struct file *file,
+                             unsigned int set, unsigned int clear);
+static int  option_send_setup (struct usb_serial_port *port);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID		0x0AF0
+
+#define	OPTION_PRODUCT_OLD		0x5000
+#define	OPTION_PRODUCT_WLAN		0x6000
+
+static struct usb_device_id option_ids[] = {
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+static struct usb_driver option_driver = {
+	.owner      = THIS_MODULE,
+	.name       = "option",
+	.probe      = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.id_table   = option_ids,
+};
+
+/* The card has three separate interfaces, wich the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+static struct usb_serial_device_type option_3port_device = {
+	.owner			= THIS_MODULE,
+	.name			= "Option 3-port card",
+	.short_name		= "option",
+	.id_table		= option_ids,
+	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_bulk_in		= NUM_DONT_CARE,
+	.num_bulk_out		= NUM_DONT_CARE,
+	.num_ports		= 1, /* 3 */
+	.open			= option_open,
+	.close			= option_close,
+	.write			= option_write,
+	.write_room		= option_write_room,
+	.chars_in_buffer	= option_chars_in_buffer,
+	.throttle		= option_rx_throttle,
+	.unthrottle		= option_rx_unthrottle,
+	.ioctl			= option_ioctl,
+	.set_termios		= option_set_termios,
+	.break_ctl		= option_break_ctl,
+	.tiocmget		= option_tiocmget,
+	.tiocmset		= option_tiocmset,
+	.attach			= option_startup,
+	.shutdown		= option_shutdown,
+	.read_int_callback	= option_instat_callback,
+};
+
+static int debug;
+
+/* per port private data */
+
+#define N_IN_URB	4
+#define N_OUT_URB	1
+#define IN_BUFLEN	1024
+#define OUT_BUFLEN	1024
+
+struct option_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb	*in_urbs[N_IN_URB];
+	char		in_buffer[N_IN_URB][IN_BUFLEN];
+	/* Output endpoints and buffer for this port */
+	struct urb	*out_urbs[N_OUT_URB];
+	char		out_buffer[N_OUT_URB][OUT_BUFLEN];
+
+	/* Settings for the port */
+	int		rts_state;	/* Handshaking pins (outputs) */
+	int		dtr_state;
+	int		cts_state;	/* Handshaking pins (inputs) */
+	int		dsr_state;
+	int		dcd_state;
+	int		ri_state;
+	// int		break_on;
+
+	unsigned long	tx_start_time[N_OUT_URB];
+};
+
+
+/* Functions used by new usb-serial code. */
+static int __init
+option_init (void)
+{
+	int retval;
+	retval = usb_serial_register(&option_3port_device);
+	if (retval)
+		goto failed_3port_device_register;
+	retval = usb_register(&option_driver);
+	if (retval)
+		goto failed_driver_register;
+
+	info(DRIVER_DESC ": " DRIVER_VERSION);
+
+	return 0;
+
+failed_driver_register:
+	usb_serial_deregister (&option_3port_device);
+failed_3port_device_register:
+	return retval;
+}
+
+static void __exit
+option_exit (void)
+{
+	usb_deregister (&option_driver);
+	usb_serial_deregister (&option_3port_device);
+}
+
+module_init(option_init);
+module_exit(option_exit);
+
+static void
+option_rx_throttle (struct usb_serial_port *port)
+{
+	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_rx_unthrottle (struct usb_serial_port *port)
+{
+	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_break_ctl (struct usb_serial_port *port, int break_state)
+{
+	/* Unfortunately, I don't know how to send a break */
+ 	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_set_termios (struct usb_serial_port *port,
+				     struct termios *old_termios)
+{
+	dbg("%s", __FUNCTION__);
+
+	option_send_setup(port);
+}
+
+static int
+option_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+	unsigned int			value;
+	struct option_port_private 	*portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+		((portdata->dtr_state) ? TIOCM_DTR : 0) |
+		((portdata->cts_state) ? TIOCM_CTS : 0) |
+		((portdata->dsr_state) ? TIOCM_DSR : 0) |
+		((portdata->dcd_state) ? TIOCM_CAR : 0) |
+		((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+
+static int
+option_tiocmset (struct usb_serial_port *port, struct file *file,
+                 unsigned int set, unsigned int clear)
+{
+	struct option_port_private 	*portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return option_send_setup(port);
+}
+
+static int
+option_ioctl (struct usb_serial_port *port, struct file *file,
+              unsigned int cmd, unsigned long arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+/* Write */
+static int
+option_write(struct usb_serial_port *port,
+			 const unsigned char *buf, int count)
+{
+	struct option_port_private 	*portdata;
+	int				i;
+	int 				left, todo;
+	struct urb			*this_urb = NULL; /* spurious */
+ 	int 				err;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dbg("%s: write (%d chars)", __FUNCTION__, count);
+
+#if 0
+	spin_lock(&port->lock);
+	if (port->write_urb_busy) {
+		spin_unlock(&port->lock);
+		dbg("%s: already writing", __FUNCTION__);
+		return 0;
+	}
+	port->write_urb_busy = 1;
+	spin_unlock(&port->lock);
+#endif
+
+	i = 0;
+	left = count;
+	while (left>0) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		for (;i < N_OUT_URB; i++) {
+			/* Check we have a valid urb/endpoint before we use it... */
+			this_urb = portdata->out_urbs[i];
+			if (this_urb->status != -EINPROGRESS)
+				break;
+			if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
+				continue;
+			if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			this_urb->transfer_flags |= URB_ASYNC_UNLINK;
+			usb_unlink_urb(this_urb);
+		}
+
+		if (i == N_OUT_URB) {
+			/* no bulk out free! */
+			dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
+#if 0
+			port->write_urb_busy = 0;
+#endif
+			return count-left;
+		}
+
+		dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+
+		memcpy (this_urb->transfer_buffer, buf, todo);
+
+		/* send the data out the bulk port */
+		this_urb->transfer_buffer_length = todo;
+
+		this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+		this_urb->dev = port->serial->dev;
+		err = usb_submit_urb(this_urb, GFP_ATOMIC);
+		if (err) {
+			dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+			continue;
+		}
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+#if 0
+	port->write_urb_busy = 0;
+#endif
+	dbg("%s: wrote (did %d)", __FUNCTION__, count);
+	return count;
+}
+
+static void
+option_indat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	int	i, err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+
+	dbg("%s: %p", __FUNCTION__, urb);
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = (struct usb_serial_port *) urb->context;
+
+	if (urb->status) {
+		dbg("%s: nonzero status: %d on endpoint %02x.",
+		    __FUNCTION__, urb->status, endpoint);
+	} else {
+		tty = port->tty;
+		if (urb->actual_length) {
+			for (i = 0; i < urb->actual_length ; ++i) {
+				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+					tty_flip_buffer_push(tty);
+				tty_insert_flip_char(tty, data[i], 0);
+			}
+			tty_flip_buffer_push(tty);
+		} else {
+			dbg("%s: empty read urb received", __FUNCTION__);
+		}
+
+		/* Resubmit urb so we continue receiving */
+		if (port->open_count && urb->status != -ESHUTDOWN) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err)
+				printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+		}
+	}
+	return;
+}
+
+static void
+option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_serial_port *port;
+
+	dbg("%s", __FUNCTION__);
+
+	port = (struct usb_serial_port *) urb->context;
+
+	if (port->open_count)
+		schedule_work(&port->work);
+}
+
+static void
+option_instat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	int err;
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+
+	dbg("%s", __FUNCTION__);
+	dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+
+	if (urb->status == 0) {
+		struct usb_ctrlrequest *req_pkt =
+				(struct usb_ctrlrequest *)urb->transfer_buffer;
+
+		if (!req_pkt) {
+			dbg("%s: NULL req_pkt\n", __FUNCTION__);
+			return;
+		}
+		if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+			int old_dcd_state;
+			unsigned char signals = *((unsigned char *)
+					urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+
+			dbg("%s: signal x%x", __FUNCTION__, signals);
+
+			old_dcd_state = portdata->dcd_state;
+			portdata->cts_state = 1;
+			portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+			if (port->tty && !C_CLOCAL(port->tty)
+					&& old_dcd_state && !portdata->dcd_state) {
+				tty_hangup(port->tty);
+			}
+		} else
+			dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+	} else
+		dbg("%s: error %d", __FUNCTION__, urb->status);
+
+	/* Resubmit urb so we continue receiving IRQ data */
+	if (urb->status != -ESHUTDOWN) {
+		urb->dev = serial->dev;
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err)
+			dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+	}
+}
+
+
+static int
+option_write_room (struct usb_serial_port *port)
+{
+	struct option_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i=0; i < N_OUT_URB; i++)
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && this_urb->status != -EINPROGRESS)
+			data_len += OUT_BUFLEN;
+
+	dbg("%s: %d", __FUNCTION__, data_len);
+	return data_len;
+}
+
+
+static int
+option_chars_in_buffer (struct usb_serial_port *port)
+{
+	struct option_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i=0; i < N_OUT_URB; i++)
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && this_urb->status == -EINPROGRESS)
+			data_len += this_urb->transfer_buffer_length;
+
+	dbg("%s: %d", __FUNCTION__, data_len);
+	return data_len;
+}
+
+
+static int
+option_open (struct usb_serial_port *port, struct file *filp)
+{
+	struct option_port_private 	*portdata;
+	struct usb_serial 		*serial = port->serial;
+	int				i, err;
+	struct urb			*urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dbg("%s", __FUNCTION__);
+
+	/* Set some sane defaults */
+	portdata->rts_state = 1;
+	portdata->dtr_state = 1;
+
+	/* Reset low level data toggle and start reading from endpoints */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (! urb)
+			continue;
+		if (urb->dev != serial->dev) {
+			dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+			continue;
+		}
+
+		/* make sure endpoint data toggle is synchronized with the device */
+
+		usb_clear_halt(urb->dev, urb->pipe);
+
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+				urb->transfer_buffer_length);
+		}
+	}
+
+	/* Reset low level data toggle on out endpoints */
+	for (i = 0; i < N_OUT_URB; i++) {
+		urb = portdata->out_urbs[i];
+		if (! urb)
+			continue;
+		urb->dev = serial->dev;
+		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+	}
+
+	port->tty->low_latency = 1;
+
+	option_send_setup(port);
+
+	return (0);
+}
+
+static inline void
+stop_urb(struct urb *urb)
+{
+	if (urb && urb->status == -EINPROGRESS) {
+		urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+		usb_kill_urb(urb);
+	}
+}
+
+static void
+option_close(struct usb_serial_port *port, struct file *filp)
+{
+	int			i;
+	struct usb_serial	*serial = port->serial;
+	struct option_port_private 	*portdata;
+
+	dbg("%s", __FUNCTION__);
+	portdata = usb_get_serial_port_data(port);
+
+	portdata->rts_state = 0;
+	portdata->dtr_state = 0;
+
+	if (serial->dev) {
+		option_send_setup(port);
+
+		/* Stop reading/writing urbs */
+		for (i = 0; i < N_IN_URB; i++)
+			stop_urb(portdata->in_urbs[i]);
+		for (i = 0; i < N_OUT_URB; i++)
+			stop_urb(portdata->out_urbs[i]);
+	}
+	port->tty = NULL;
+}
+
+
+/* Helper functions used by option_setup_urbs */
+static struct urb *
+option_setup_urb (struct usb_serial *serial, int endpoint,
+                  int dir, void *ctx, char *buf, int len,
+                  void (*callback)(struct urb *, struct pt_regs *regs))
+{
+	struct urb *urb;
+
+	if (endpoint == -1)
+		return NULL;		/* endpoint not needed */
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
+	if (urb == NULL) {
+		dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+		return NULL;
+	}
+
+		/* Fill URB using supplied data. */
+	usb_fill_bulk_urb(urb, serial->dev,
+		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
+		      buf, len, callback, ctx);
+
+	return urb;
+}
+
+/* Setup urbs */
+static void
+option_setup_urbs(struct usb_serial *serial)
+{
+	int				j;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	port = serial->port[0];
+	portdata = usb_get_serial_port_data(port);
+
+	/* Do indat endpoints first */
+	for (j = 0; j <= N_IN_URB; ++j) {
+		portdata->in_urbs[j] = option_setup_urb (serial,
+                  port->bulk_in_endpointAddress, USB_DIR_IN, port,
+                  portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+	}
+
+	/* outdat endpoints */
+	for (j = 0; j <= N_OUT_URB; ++j) {
+		portdata->out_urbs[j] = option_setup_urb (serial,
+                  port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+                  portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+	}
+}
+
+
+static int
+option_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct option_port_private *portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (port->tty) {
+		int val = 0;
+		if (portdata->dtr_state)
+			val |= 0x01;
+		if (portdata->rts_state)
+			val |= 0x02;
+
+		return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+					0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+	}
+
+	return 0;
+}
+
+
+static int
+option_startup (struct usb_serial *serial)
+{
+	int				i, err;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+		if (!portdata) {
+			dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+			return (1);
+		}
+		memset(portdata, 0, sizeof(struct option_port_private));
+
+		usb_set_serial_port_data(port, portdata);
+
+		if (! port->interrupt_in_urb)
+			continue;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err)
+			dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+	}
+
+	option_setup_urbs(serial);
+
+	return (0);
+}
+
+static void
+option_shutdown (struct usb_serial *serial)
+{
+	int				i, j;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			stop_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			stop_urb(portdata->out_urbs[j]);
+	}
+
+	/* Now free them */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			if (portdata->in_urbs[j]) {
+				usb_free_urb(portdata->in_urbs[j]);
+				portdata->in_urbs[j] = NULL;
+			}
+		}
+		for (j = 0; j < N_OUT_URB; j++) {
+			if (portdata->out_urbs[j]) {
+				usb_free_urb(portdata->out_urbs[j]);
+				portdata->out_urbs[j] = NULL;
+			}
+		}
+	}
+
+	/* Now free per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		kfree(usb_get_serial_port_data(port));
+	}
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
+
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4536f63..5da76dd 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void)
 		goto exit_bus;
 	}
 
-	/* register the generic driver, if we should */
-	result = usb_serial_generic_register(debug);
-	if (result < 0) {
-		err("%s - registering generic driver failed", __FUNCTION__);
-		goto exit_generic;
-	}
-
 	usb_serial_tty_driver->owner = THIS_MODULE;
 	usb_serial_tty_driver->driver_name = "usbserial";
 	usb_serial_tty_driver->devfs_name = "usb/tts/";
@@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void)
 		goto exit_tty;
 	}
 
+	/* register the generic driver, if we should */
+	result = usb_serial_generic_register(debug);
+	if (result < 0) {
+		err("%s - registering generic driver failed", __FUNCTION__);
+		goto exit_generic;
+	}
+
 	info(DRIVER_DESC " " DRIVER_VERSION);
 
 	return result;
 
+exit_generic:
+	usb_deregister(&usb_serial_driver);
+
 exit_tty:
 	tty_unregister_driver(usb_serial_tty_driver);
 
 exit_reg_driver:
-	usb_serial_generic_deregister();
-
-exit_generic:
 	bus_unregister(&usb_serial_bus_type);
 
 exit_bus:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d2891f4..9fcc7bd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -862,6 +862,15 @@ UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
+/* Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
+		"Trumpion Microelectronics, Inc.",
+		"33520 USB Digital Voice Recorder",
+		US_SC_UFI, US_PR_DEVICE, NULL,
+		0),
+
 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		"Trumpion",
diff --git a/fs/cifs/README b/fs/cifs/README
index e74df0c..34b0cf7 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -371,7 +371,7 @@ A partial list of the supported mount options follows:
 		on newly created files, directories, and devices (create, 
 		mkdir, mknod) which will result in the server setting the
 		uid and gid to the default (usually the server uid of the
-		usern who mounted the share).  Letting the server (rather than
+		user who mounted the share).  Letting the server (rather than
 		the client) set the uid and gid is the default. This
 		parameter has no effect if the CIFS Unix Extensions are not
 		negotiated.
@@ -384,7 +384,7 @@ A partial list of the supported mount options follows:
 		client (e.g. when the application is doing large sequential
 		reads bigger than page size without rereading the same data) 
 		this can provide better performance than the default
-		behavior which caches reads (reaadahead) and writes 
+		behavior which caches reads (readahead) and writes 
 		(writebehind) through the local Linux client pagecache 
 		if oplock (caching token) is granted and held. Note that
 		direct allows write operations larger than page size
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 0010511..ea239de 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -228,7 +228,7 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
 			const struct nls_table *nls_codepage, 
 			int remap_special_chars);
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
-extern int cifs_convertUCSpath(char *target, const __u16 *source, int maxlen,
+extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
 			const struct nls_table * codepage);
 extern int cifsConvertToUCS(__le16 * target, const char *source, int maxlen,
 			const struct nls_table * cp, int mapChars);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 741ff0c..3c628bf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -567,7 +567,7 @@ DelFileRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->fileName, fileName, 
+		    cifsConvertToUCS((__le16 *) pSMB->fileName, fileName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -665,7 +665,7 @@ MkDirRetry:
 		return rc;
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-		name_len = cifsConvertToUCS((__u16 *) pSMB->DirName, name, 
+		name_len = cifsConvertToUCS((__le16 *) pSMB->DirName, name, 
 					    PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -719,7 +719,7 @@ openRetry:
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		count = 1;	/* account for one byte pad to word boundary */
 		name_len =
-		    cifsConvertToUCS((__u16 *) (pSMB->fileName + 1),
+		    cifsConvertToUCS((__le16 *) (pSMB->fileName + 1),
 				     fileName, PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -1141,7 +1141,7 @@ renameRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName, 
+		    cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -1149,7 +1149,7 @@ renameRetry:
 	/* protocol requires ASCII signature byte on Unicode string */
 		pSMB->OldFileName[name_len + 1] = 0x00;
 		name_len2 =
-		    cifsConvertToUCS((__u16 *) &pSMB->OldFileName[name_len + 2],
+		    cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2],
 				     toName, PATH_MAX, nls_codepage, remap);
 		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
 		name_len2 *= 2;	/* convert to bytes */
@@ -1236,10 +1236,10 @@ int CIFSSMBRenameOpenFile(const int xid,struct cifsTconInfo *pTcon,
 	/* unicode only call */
 	if(target_name == NULL) {
 		sprintf(dummy_string,"cifs%x",pSMB->hdr.Mid);
-	        len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name,
+	        len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
 					dummy_string, 24, nls_codepage, remap);
 	} else {
-		len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name,
+		len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
 					target_name, PATH_MAX, nls_codepage, remap);
 	}
 	rename_info->target_name_len = cpu_to_le32(2 * len_of_str);
@@ -1296,7 +1296,7 @@ copyRetry:
 	pSMB->Flags = cpu_to_le16(flags & COPY_TREE);
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-		name_len = cifsConvertToUCS((__u16 *) pSMB->OldFileName, 
+		name_len = cifsConvertToUCS((__le16 *) pSMB->OldFileName, 
 					    fromName, PATH_MAX, nls_codepage,
 					    remap);
 		name_len++;     /* trailing null */
@@ -1304,7 +1304,7 @@ copyRetry:
 		pSMB->OldFileName[name_len] = 0x04;     /* pad */
 		/* protocol requires ASCII signature byte on Unicode string */
 		pSMB->OldFileName[name_len + 1] = 0x00;
-		name_len2 = cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2], 
+		name_len2 = cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2], 
 				toName, PATH_MAX, nls_codepage, remap);
 		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
 		name_len2 *= 2; /* convert to bytes */
@@ -1453,7 +1453,7 @@ createHardLinkRetry:
 		return rc;
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
-		name_len = cifsConvertToUCS((__u16 *) pSMB->FileName, toName,
+		name_len = cifsConvertToUCS((__le16 *) pSMB->FileName, toName,
 					    PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -1476,7 +1476,7 @@ createHardLinkRetry:
 	data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len_target =
-		    cifsConvertToUCS((__u16 *) data_offset, fromName, PATH_MAX,
+		    cifsConvertToUCS((__le16 *) data_offset, fromName, PATH_MAX,
 				     nls_codepage, remap);
 		name_len_target++;	/* trailing null */
 		name_len_target *= 2;
@@ -1546,14 +1546,14 @@ winCreateHardLinkRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName,
+		    cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName,
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
 		pSMB->OldFileName[name_len] = 0;	/* pad */
 		pSMB->OldFileName[name_len + 1] = 0x04; 
 		name_len2 =
-		    cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2], 
+		    cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2], 
 				     toName, PATH_MAX, nls_codepage, remap);
 		name_len2 += 1 /* trailing null */  + 1 /* Signature word */ ;
 		name_len2 *= 2;	/* convert to bytes */
@@ -1939,7 +1939,7 @@ queryAclRetry:
                                                                                                                                              
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-			cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, 
+			cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, 
 					 PATH_MAX, nls_codepage, remap);
 		name_len++;     /* trailing null */
 		name_len *= 2;
@@ -2024,7 +2024,7 @@ setAclRetry:
 		return rc;
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-			cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, 
+			cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, 
 				      PATH_MAX, nls_codepage, remap);
 		name_len++;     /* trailing null */
 		name_len *= 2;
@@ -2188,7 +2188,7 @@ QPathInfoRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, 
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -2269,7 +2269,7 @@ UnixQPathInfoRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
 				  PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -2350,7 +2350,7 @@ findUniqueRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName, PATH_MAX
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX
 				  /* find define for this maxpathcomponent */
 				  , nls_codepage);
 		name_len++;	/* trailing null */
@@ -2435,7 +2435,7 @@ findFirstRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName,searchName,
+		    cifsConvertToUCS((__le16 *) pSMB->FileName,searchName,
 				 PATH_MAX, nls_codepage, remap);
 		/* We can not add the asterik earlier in case
 		it got remapped to 0xF03A as if it were part of the
@@ -2726,7 +2726,7 @@ GetInodeNumberRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-			cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+			cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
 				PATH_MAX,nls_codepage, remap);
 		name_len++;     /* trailing null */
 		name_len *= 2;
@@ -2837,7 +2837,7 @@ getDFSRetry:
 	if (ses->capabilities & CAP_UNICODE) {
 		pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->RequestFileName,
+		    cifsConvertToUCS((__le16 *) pSMB->RequestFileName,
 				     searchName, PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -3369,7 +3369,7 @@ SetEOFRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -3627,7 +3627,7 @@ SetTimesRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -3708,7 +3708,7 @@ SetAttrLgcyRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-			ConvertToUCS((wchar_t *) pSMB->fileName, fileName, 
+			ConvertToUCS((__le16 *) pSMB->fileName, fileName, 
 				PATH_MAX, nls_codepage);
 		name_len++;     /* trailing null */
 		name_len *= 2;
@@ -3759,7 +3759,7 @@ setPermsRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, 
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -3904,7 +3904,7 @@ QAllEAsRetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName, 
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -4047,7 +4047,7 @@ QEARetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, 
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
@@ -4194,7 +4194,7 @@ SetEARetry:
 
 	if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
 		name_len =
-		    cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, 
+		    cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, 
 				     PATH_MAX, nls_codepage, remap);
 		name_len++;	/* trailing null */
 		name_len *= 2;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e3137aa..3f3538d 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -392,7 +392,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, struct name
 		rc = 0;
 		d_add(direntry, NULL);
 	} else {
-		cERROR(1,("Error 0x%x or on cifs_get_inode_info in lookup",rc));
+		cERROR(1,("Error 0x%x on cifs_get_inode_info in lookup of %s",
+			   rc,full_path));
 		/* BB special case check for Access Denied - watch security 
 		exposure of returning dir info implicitly via different rc 
 		if file exists or not but no access BB */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 6709472..b8b78cb 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -422,7 +422,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry)
 			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 	if (!rc) {
-		direntry->d_inode->i_nlink--;
+		if(direntry->d_inode)
+			direntry->d_inode->i_nlink--;
 	} else if (rc == -ENOENT) {
 		d_drop(direntry);
 	} else if (rc == -ETXTBSY) {
@@ -440,7 +441,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry)
 					      cifs_sb->mnt_cifs_flags & 
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 			CIFSSMBClose(xid, pTcon, netfid);
-			direntry->d_inode->i_nlink--;
+			if(direntry->d_inode)
+				direntry->d_inode->i_nlink--;
 		}
 	} else if (rc == -EACCES) {
 		/* try only if r/o attribute set in local lookup data? */
@@ -494,7 +496,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry)
 					    cifs_sb->mnt_cifs_flags & 
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 			if (!rc) {
-				direntry->d_inode->i_nlink--;
+				if(direntry->d_inode)
+					direntry->d_inode->i_nlink--;
 			} else if (rc == -ETXTBSY) {
 				int oplock = FALSE;
 				__u16 netfid;
@@ -514,17 +517,20 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry)
 						cifs_sb->mnt_cifs_flags &
 						    CIFS_MOUNT_MAP_SPECIAL_CHR);
 					CIFSSMBClose(xid, pTcon, netfid);
-		                        direntry->d_inode->i_nlink--;
+					if(direntry->d_inode)
+			                        direntry->d_inode->i_nlink--;
 				}
 			/* BB if rc = -ETXTBUSY goto the rename logic BB */
 			}
 		}
 	}
-	cifsInode = CIFS_I(direntry->d_inode);
-	cifsInode->time = 0;	/* will force revalidate to get info when
-				   needed */
-	direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
-		current_fs_time(inode->i_sb);
+	if(direntry->d_inode) {
+		cifsInode = CIFS_I(direntry->d_inode);
+		cifsInode->time = 0;	/* will force revalidate to get info
+					   when needed */
+		direntry->d_inode->i_ctime = current_fs_time(inode->i_sb);
+	}
+	inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb);
 	cifsInode = CIFS_I(inode);
 	cifsInode->time = 0;	/* force revalidate of dir as well */
 
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index db14b50..072b4ee 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -571,6 +571,7 @@ cifs_convertUCSpath(char *target, const __le16 * source, int maxlen,
 				break;
 			case UNI_LESSTHAN:
 				target[j] = '<';
+				break;
 			default: 
 				len = cp->uni2char(src_char, &target[j], 
 						NLS_MAX_CHARSET_SIZE);
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 98d8304..5a97e34 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -188,7 +188,6 @@ static int __cleanup_transaction(journal_t *journal, transaction_t *transaction)
 		} else {
 			jbd_unlock_bh_state(bh);
 		}
-		jh = next_jh;
 	} while (jh != last_jh);
 
 	return ret;
@@ -339,8 +338,10 @@ int log_do_checkpoint(journal_t *journal)
 			}
 		} while (jh != last_jh && !retry);
 
-		if (batch_count)
+		if (batch_count) {
 			__flush_batch(journal, bhs, &batch_count);
+			retry = 1;
+		}
 
 		/*
 		 * If someone cleaned up this transaction while we slept, we're
diff --git a/fs/mpage.c b/fs/mpage.c
index b92c0e6..bb9aebe 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -79,8 +79,11 @@ static int mpage_end_io_write(struct bio *bio, unsigned int bytes_done, int err)
 		if (--bvec >= bio->bi_io_vec)
 			prefetchw(&bvec->bv_page->flags);
 
-		if (!uptodate)
+		if (!uptodate){
 			SetPageError(page);
+			if (page->mapping)
+				set_bit(AS_EIO, &page->mapping->flags);
+		}
 		end_page_writeback(page);
 	} while (bvec >= bio->bi_io_vec);
 	bio_put(bio);
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 67423c6..6fd57f1 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -12,15 +12,8 @@
 #include <asm/uaccess.h>
 
 #ifndef HAVE_ARCH_DEVTREE_FIXUPS
-static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_name_link(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_addr_link(struct device_node *np, struct proc_dir_entry *de)
+static inline void set_node_proc_entry(struct device_node *np,
+				       struct proc_dir_entry *de)
 {
 }
 #endif
@@ -58,89 +51,67 @@ static int property_read_proc(char *page, char **start, off_t off,
 /*
  * Process a node, adding entries for its children and its properties.
  */
-void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *de)
+void proc_device_tree_add_node(struct device_node *np,
+			       struct proc_dir_entry *de)
 {
 	struct property *pp;
 	struct proc_dir_entry *ent;
-	struct device_node *child, *sib;
-	const char *p, *at;
-	int l;
-	struct proc_dir_entry *list, **lastp, *al;
+	struct device_node *child;
+	struct proc_dir_entry *list = NULL, **lastp;
+	const char *p;
 
 	set_node_proc_entry(np, de);
 	lastp = &list;
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		/*
-		 * Unfortunately proc_register puts each new entry
-		 * at the beginning of the list.  So we rearrange them.
-		 */
-		ent = create_proc_read_entry(pp->name, strncmp(pp->name, "security-", 9) ?
-					     S_IRUGO : S_IRUSR, de, property_read_proc, pp);
-		if (ent == 0)
-			break;
-		if (!strncmp(pp->name, "security-", 9))
-		     ent->size = 0; /* don't leak number of password chars */
-		else
-		     ent->size = pp->length;
-		*lastp = ent;
-		lastp = &ent->next;
-	}
-	child = NULL;
-	while ((child = of_get_next_child(np, child))) {
+	for (child = NULL; (child = of_get_next_child(np, child));) {
 		p = strrchr(child->full_name, '/');
 		if (!p)
 			p = child->full_name;
 		else
 			++p;
-		/* chop off '@0' if the name ends with that */
-		l = strlen(p);
-		if (l > 2 && p[l-2] == '@' && p[l-1] == '0')
-			l -= 2;
 		ent = proc_mkdir(p, de);
 		if (ent == 0)
 			break;
 		*lastp = ent;
+		ent->next = NULL;
 		lastp = &ent->next;
 		proc_device_tree_add_node(child, ent);
-
-		/*
-		 * If we left the address part on the name, consider
-		 * adding symlinks from the name and address parts.
-		 */
-		if (p[l] != 0 || (at = strchr(p, '@')) == 0)
-			continue;
-
+	}
+	of_node_put(child);
+	for (pp = np->properties; pp != 0; pp = pp->next) {
 		/*
-		 * If this is the first node with a given name property,
-		 * add a symlink with the name property as its name.
+		 * Yet another Apple device-tree bogosity: on some machines,
+		 * they have properties & nodes with the same name. Those
+		 * properties are quite unimportant for us though, thus we
+		 * simply "skip" them here, but we do have to check.
 		 */
-		sib = NULL;
-		while ((sib = of_get_next_child(np, sib)) && sib != child)
-			if (sib->name && strcmp(sib->name, child->name) == 0)
-				break;
-		if (sib == child && strncmp(p, child->name, l) != 0) {
-			al = proc_symlink(child->name, de, ent->name);
-			if (al == 0) {
-				of_node_put(sib);
+		for (ent = list; ent != NULL; ent = ent->next)
+			if (!strcmp(ent->name, pp->name))
 				break;
-			}
-			set_node_name_link(child, al);
-			*lastp = al;
-			lastp = &al->next;
+		if (ent != NULL) {
+			printk(KERN_WARNING "device-tree: property \"%s\" name"
+			       " conflicts with node in %s\n", pp->name,
+			       np->full_name);
+			continue;
 		}
-		of_node_put(sib);
+
 		/*
-		 * Add another directory with the @address part as its name.
+		 * Unfortunately proc_register puts each new entry
+		 * at the beginning of the list.  So we rearrange them.
 		 */
-		al = proc_symlink(at, de, ent->name);
-		if (al == 0)
+		ent = create_proc_read_entry(pp->name,
+					     strncmp(pp->name, "security-", 9)
+					     ? S_IRUGO : S_IRUSR, de,
+					     property_read_proc, pp);
+		if (ent == 0)
 			break;
-		set_node_addr_link(child, al);
-		*lastp = al;
-		lastp = &al->next;
+		if (!strncmp(pp->name, "security-", 9))
+		     ent->size = 0; /* don't leak number of password chars */
+		else
+		     ent->size = pp->length;
+		ent->next = NULL;
+		*lastp = ent;
+		lastp = &ent->next;
 	}
-	of_node_put(child);
-	*lastp = NULL;
 	de->subdir = list;
 }
 
diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h
index 0035efe..809c634b 100644
--- a/include/asm-ppc64/processor.h
+++ b/include/asm-ppc64/processor.h
@@ -120,103 +120,18 @@
 
 /* Special Purpose Registers (SPRNs)*/
 
-#define	SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
 #define	SPRN_CTR	0x009	/* Count Register */
 #define	SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
-#define	SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
-#define	SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define   DABR_TRANSLATION	(1UL << 2)
 #define	SPRN_DAR	0x013	/* Data Address Register */
-#define	SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
-#define	  DBCR_EDM	0x80000000
-#define	  DBCR_IDM	0x40000000
-#define	  DBCR_RST(x)	(((x) & 0x3) << 28)
-#define	    DBCR_RST_NONE       	0
-#define	    DBCR_RST_CORE       	1
-#define	    DBCR_RST_CHIP       	2
-#define	    DBCR_RST_SYSTEM		3
-#define	  DBCR_IC	0x08000000	/* Instruction Completion Debug Evnt */
-#define	  DBCR_BT	0x04000000	/* Branch Taken Debug Event */
-#define	  DBCR_EDE	0x02000000	/* Exception Debug Event */
-#define	  DBCR_TDE	0x01000000	/* TRAP Debug Event */
-#define	  DBCR_FER	0x00F80000	/* First Events Remaining Mask */
-#define	  DBCR_FT	0x00040000	/* Freeze Timers on Debug Event */
-#define	  DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
-#define	  DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
-#define	  DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
-#define	  DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
-#define	  DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
-#define	    DAC_BYTE	0
-#define	    DAC_HALF	1
-#define	    DAC_WORD	2
-#define	    DAC_QUAD	3
-#define	  DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
-#define	  DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
-#define	  DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
-#define	  DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
-#define	  DBCR_SED	0x00000020	/* Second Exception Debug Event */
-#define	  DBCR_STD	0x00000010	/* Second Trap Debug Event */
-#define	  DBCR_SIA	0x00000008	/* Second IAC Enable */
-#define	  DBCR_SDA	0x00000004	/* Second DAC Enable */
-#define	  DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
-#define	  DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
-#define	SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
-#define	SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */
-#define	SPRN_DBSR	0x3F0	/* Debug Status Register */
-#define	SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
-#define	  DCCR_NOCACHE		0	/* Noncacheable */
-#define	  DCCR_CACHE		1	/* Cacheable */
-#define	SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
-#define	SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
-#define	  DCWR_COPY		0	/* Copy-back */
-#define	  DCWR_WRITE		1	/* Write-through */
-#define	SPRN_DEAR	0x3D5	/* Data Error Address Register */
 #define	SPRN_DEC	0x016	/* Decrement Register */
-#define	SPRN_DMISS	0x3D0	/* Data TLB Miss Register */
 #define	SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE		0x40000000	/* no translation found */
 #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
 #define   DSISR_ISSTORE		0x02000000	/* access was a store */
 #define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
 #define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
-#define	SPRN_EAR	0x11A	/* External Address Register */
-#define	SPRN_ESR	0x3D4	/* Exception Syndrome Register */
-#define	  ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
-#define	  ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
-#define	  ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
-#define	  ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
-#define	  ESR_PIL	0x08000000	/* Program Exception - Illegal */
-#define	  ESR_PPR	0x04000000	/* Program Exception - Priveleged */
-#define	  ESR_PTR	0x02000000	/* Program Exception - Trap */
-#define	  ESR_DST	0x00800000	/* Storage Exception - Data miss */
-#define	  ESR_DIZ	0x00400000	/* Storage Exception - Zone fault */
-#define	SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
-#define	SPRN_HASH1	0x3D2	/* Primary Hash Address Register */
-#define	SPRN_HASH2	0x3D3	/* Secondary Hash Address Resgister */
 #define	SPRN_HID0	0x3F0	/* Hardware Implementation Register 0 */
-#define	  HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
-#define	  HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
-#define	  HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
-#define	  HID0_SBCLK	(1<<27)
-#define	  HID0_EICE	(1<<26)
-#define	  HID0_ECLK	(1<<25)
-#define	  HID0_PAR	(1<<24)
-#define	  HID0_DOZE	(1<<23)
-#define	  HID0_NAP	(1<<22)
-#define	  HID0_SLEEP	(1<<21)
-#define	  HID0_DPM	(1<<20)
-#define	  HID0_ICE	(1<<15)		/* Instruction Cache Enable */
-#define	  HID0_DCE	(1<<14)		/* Data Cache Enable */
-#define	  HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
-#define	  HID0_DLOCK	(1<<12)		/* Data Cache Lock */
-#define	  HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
-#define	  HID0_DCI	(1<<10)		/* Data Cache Invalidate */
-#define   HID0_SPD	(1<<9)		/* Speculative disable */
-#define   HID0_SGE	(1<<7)		/* Store Gathering Enable */
-#define	  HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
-#define   HID0_BTIC	(1<<5)		/* Branch Target Instruction Cache Enable */
-#define   HID0_ABE	(1<<3)		/* Address Broadcast Enable */
-#define	  HID0_BHTE	(1<<2)		/* Branch History Table Enable */
-#define	  HID0_BTCD	(1<<1)		/* Branch target cache disable */
 #define	SPRN_MSRDORM	0x3F1	/* Hardware Implementation Register 1 */
 #define SPRN_HID1	0x3F1	/* Hardware Implementation Register 1 */
 #define	SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
@@ -225,23 +140,8 @@
 #define SPRN_HID5	0x3F6	/* 970 HID5 */
 #define	SPRN_TSC 	0x3FD	/* Thread switch control */
 #define	SPRN_TST 	0x3FC	/* Thread switch timeout */
-#define	SPRN_IAC1	0x3F4	/* Instruction Address Compare 1 */
-#define	SPRN_IAC2	0x3F5	/* Instruction Address Compare 2 */
-#define	SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
-#define	  ICCR_NOCACHE		0	/* Noncacheable */
-#define	  ICCR_CACHE		1	/* Cacheable */
-#define	SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
-#define	SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
-#define	SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
-#define	SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
-#define	SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
 #define	SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define	SPRN_LR		0x008	/* Link Register */
-#define	SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
-#define	SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
-#define	SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
-#define	SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
-#define	SPRN_PID	0x3B1	/* Process ID */
 #define	SPRN_PIR	0x3FF	/* Processor Identification Register */
 #define	SPRN_PIT	0x3DB	/* Programmable Interval Timer */
 #define	SPRN_PURR	0x135	/* Processor Utilization of Resources Register */
@@ -249,9 +149,6 @@
 #define	SPRN_RPA	0x3D6	/* Required Physical Address Register */
 #define	SPRN_SDA	0x3BF	/* Sampled Data Address Register */
 #define	SPRN_SDR1	0x019	/* MMU Hash Base Register */
-#define	SPRN_SGR	0x3B9	/* Storage Guarded Register */
-#define	  SGR_NORMAL		0
-#define	  SGR_GUARDED		1
 #define	SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
 #define	SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
 #define	SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
@@ -264,50 +161,12 @@
 #define	SPRN_TBWL	0x11C	/* Time Base Lower Register (super, W/O) */
 #define	SPRN_TBWU	0x11D	/* Time Base Write Upper Register (super, W/O) */
 #define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
-#define	SPRN_TCR	0x3DA	/* Timer Control Register */
-#define	  TCR_WP(x)		(((x)&0x3)<<30)	/* WDT Period */
-#define	    WP_2_17		0		/* 2^17 clocks */
-#define	    WP_2_21		1		/* 2^21 clocks */
-#define	    WP_2_25		2		/* 2^25 clocks */
-#define	    WP_2_29		3		/* 2^29 clocks */
-#define	  TCR_WRC(x)		(((x)&0x3)<<28)	/* WDT Reset Control */
-#define	    WRC_NONE		0		/* No reset will occur */
-#define	    WRC_CORE		1		/* Core reset will occur */
-#define	    WRC_CHIP		2		/* Chip reset will occur */
-#define	    WRC_SYSTEM		3		/* System reset will occur */
-#define	  TCR_WIE		0x08000000	/* WDT Interrupt Enable */
-#define	  TCR_PIE		0x04000000	/* PIT Interrupt Enable */
-#define	  TCR_FP(x)		(((x)&0x3)<<24)	/* FIT Period */
-#define	    FP_2_9		0		/* 2^9 clocks */
-#define	    FP_2_13		1		/* 2^13 clocks */
-#define	    FP_2_17		2		/* 2^17 clocks */
-#define	    FP_2_21		3		/* 2^21 clocks */
-#define	  TCR_FIE		0x00800000	/* FIT Interrupt Enable */
-#define	  TCR_ARE		0x00400000	/* Auto Reload Enable */
-#define	SPRN_THRM1	0x3FC	/* Thermal Management Register 1 */
-#define	  THRM1_TIN		(1<<0)
-#define	  THRM1_TIV		(1<<1)
-#define	  THRM1_THRES		(0x7f<<2)
-#define	  THRM1_TID		(1<<29)
-#define	  THRM1_TIE		(1<<30)
-#define	  THRM1_V		(1<<31)
-#define	SPRN_THRM2	0x3FD	/* Thermal Management Register 2 */
-#define	SPRN_THRM3	0x3FE	/* Thermal Management Register 3 */
-#define	  THRM3_E		(1<<31)
-#define	SPRN_TSR	0x3D8	/* Timer Status Register */
-#define	  TSR_ENW		0x80000000	/* Enable Next Watchdog */
-#define	  TSR_WIS		0x40000000	/* WDT Interrupt Status */
-#define	  TSR_WRS(x)		(((x)&0x3)<<28)	/* WDT Reset Status */
-#define	    WRS_NONE		0		/* No WDT reset occurred */
-#define	    WRS_CORE		1		/* WDT forced core reset */
-#define	    WRS_CHIP		2		/* WDT forced chip reset */
-#define	    WRS_SYSTEM		3		/* WDT forced system reset */
-#define	  TSR_PIS		0x08000000	/* PIT Interrupt Status */
-#define	  TSR_FIS		0x04000000	/* FIT Interrupt Status */
 #define	SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
 #define	SPRN_XER	0x001	/* Fixed Point Exception Register */
-#define	SPRN_ZPR	0x3B0	/* Zone Protection Register */
 #define SPRN_VRSAVE     0x100   /* Vector save */
+#define SPRN_CTRLF	0x088
+#define SPRN_CTRLT	0x098
+#define   CTRL_RUNLATCH	0x1
 
 /* Performance monitor SPRs */
 #define SPRN_SIAR	780
@@ -352,28 +211,19 @@
 #define	CTR	SPRN_CTR	/* Counter Register */
 #define	DAR	SPRN_DAR	/* Data Address Register */
 #define	DABR	SPRN_DABR	/* Data Address Breakpoint Register */
-#define	DCMP	SPRN_DCMP      	/* Data TLB Compare Register */
 #define	DEC	SPRN_DEC       	/* Decrement Register */
-#define	DMISS	SPRN_DMISS     	/* Data TLB Miss Register */
 #define	DSISR	SPRN_DSISR	/* Data Storage Interrupt Status Register */
-#define	EAR	SPRN_EAR       	/* External Address Register */
-#define	HASH1	SPRN_HASH1	/* Primary Hash Address Register */
-#define	HASH2	SPRN_HASH2	/* Secondary Hash Address Register */
 #define	HID0	SPRN_HID0	/* Hardware Implementation Register 0 */
 #define	MSRDORM	SPRN_MSRDORM	/* MSR Dormant Register */
 #define	NIADORM	SPRN_NIADORM	/* NIA Dormant Register */
 #define	TSC    	SPRN_TSC 	/* Thread switch control */
 #define	TST    	SPRN_TST 	/* Thread switch timeout */
 #define	IABR	SPRN_IABR      	/* Instruction Address Breakpoint Register */
-#define	ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
-#define	IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
-#define	IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
 #define	L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
 #define	__LR	SPRN_LR
 #define	PVR	SPRN_PVR	/* Processor Version */
 #define	PIR	SPRN_PIR	/* Processor ID */
 #define	PURR	SPRN_PURR	/* Processor Utilization of Resource Register */
-//#define	RPA	SPRN_RPA	/* Required Physical Address Register */
 #define	SDR1	SPRN_SDR1      	/* MMU hash base register */
 #define	SPR0	SPRN_SPRG0	/* Supervisor Private Registers */
 #define	SPR1	SPRN_SPRG1
@@ -389,10 +239,6 @@
 #define	TBRU	SPRN_TBRU	/* Time Base Read Upper Register */
 #define	TBWL	SPRN_TBWL	/* Time Base Write Lower Register */
 #define	TBWU	SPRN_TBWU	/* Time Base Write Upper Register */
-#define ICTC	1019
-#define	THRM1	SPRN_THRM1	/* Thermal Management Register 1 */
-#define	THRM2	SPRN_THRM2	/* Thermal Management Register 2 */
-#define	THRM3	SPRN_THRM3	/* Thermal Management Register 3 */
 #define	XER	SPRN_XER
 
 /* Processor Version Register (PVR) field extraction */
@@ -436,12 +282,6 @@
 #define XGLUE(a,b) a##b
 #define GLUE(a,b) XGLUE(a,b)
 
-/* iSeries CTRL register (for runlatch) */
-
-#define CTRLT		0x098
-#define CTRLF		0x088
-#define RUNLATCH	0x0001
-
 #ifdef __ASSEMBLY__
 
 #define _GLOBAL(name) \
@@ -656,6 +496,24 @@ static inline void prefetchw(const void *x)
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
 
+static inline void ppc64_runlatch_on(void)
+{
+	unsigned long ctrl;
+
+	ctrl = mfspr(SPRN_CTRLF);
+	ctrl |= CTRL_RUNLATCH;
+	mtspr(SPRN_CTRLT, ctrl);
+}
+
+static inline void ppc64_runlatch_off(void)
+{
+	unsigned long ctrl;
+
+	ctrl = mfspr(SPRN_CTRLF);
+	ctrl &= ~CTRL_RUNLATCH;
+	mtspr(SPRN_CTRLT, ctrl);
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h
index 2440a2c..04b1a84 100644
--- a/include/asm-ppc64/prom.h
+++ b/include/asm-ppc64/prom.h
@@ -147,9 +147,7 @@ struct device_node {
 	struct	device_node *sibling;
 	struct	device_node *next;	/* next device of same type */
 	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;       /* this node's proc directory */
-	struct  proc_dir_entry *name_link; /* name symlink */
-	struct  proc_dir_entry *addr_link; /* addr symlink */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
 	struct  kref kref;
 	unsigned long _flags;
 };
@@ -174,15 +172,6 @@ static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_e
 	dn->pde = de;
 }
 
-static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->name_link = de;
-}
-
-static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->addr_link = de;
-}
 
 /* OBSOLETE: Old stlye node lookup */
 extern struct device_node *find_devices(const char *name);
diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h
index 037b5e0..48b7900 100644
--- a/include/asm-ppc64/thread_info.h
+++ b/include/asm-ppc64/thread_info.h
@@ -96,7 +96,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
 #define TIF_32BIT		5	/* 32 bit binary */
-#define TIF_RUN_LIGHT		6	/* iSeries run light */
+/* #define SPARE		6 */
 #define TIF_ABI_PENDING		7	/* 32/64 bit switch needed */
 #define TIF_SYSCALL_AUDIT	8	/* syscall auditing active */
 #define TIF_SINGLESTEP		9	/* singlestepping active */
@@ -110,7 +110,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_32BIT		(1<<TIF_32BIT)
-#define _TIF_RUN_LIGHT		(1<<TIF_RUN_LIGHT)
+/* #define _SPARE		(1<<SPARE) */
 #define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h
index c64f8c1..1dc74ba 100644
--- a/include/asm-s390/user.h
+++ b/include/asm-s390/user.h
@@ -10,7 +10,7 @@
 #define _S390_USER_H
 
 #include <asm/page.h>
-#include <linux/ptrace.h>
+#include <asm/ptrace.h>
 /* Core file format: The core file is written in such a way that gdb
    can understand it and provide useful information to the user (under
    linux we use the 'trad-core' bfd).  There are quite a number of
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
index 5fd16e4..0de7a3d 100644
--- a/include/asm-sparc64/iommu.h
+++ b/include/asm-sparc64/iommu.h
@@ -16,4 +16,6 @@
 #define IOPTE_CACHE   0x0000000000000010UL /* Cached (in UPA E-cache)         */
 #define IOPTE_WRITE   0x0000000000000002UL /* Writeable                       */
 
+#define IOMMU_NUM_CTXS	4096
+
 #endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h
index 9299963..4c15610a 100644
--- a/include/asm-sparc64/pbm.h
+++ b/include/asm-sparc64/pbm.h
@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/oplib.h>
+#include <asm/iommu.h>
 
 /* The abstraction used here is that there are PCI controllers,
  * each with one (Sabre) or two (PSYCHO/SCHIZO) PCI bus modules
@@ -40,9 +41,6 @@ struct pci_iommu {
 	 */
 	spinlock_t	lock;
 
-	/* Context allocator. */
-	unsigned int	iommu_cur_ctx;
-
 	/* IOMMU page table, a linear array of ioptes. */
 	iopte_t		*page_table;		/* The page table itself. */
 	int		page_table_sz_bits;	/* log2 of ow many pages does it map? */
@@ -87,6 +85,10 @@ struct pci_iommu {
 		u16	flush;
 	} alloc_info[PBM_NCLUSTERS];
 
+	/* CTX allocation. */
+	unsigned long ctx_lowest_free;
+	unsigned long ctx_bitmap[IOMMU_NUM_CTXS / (sizeof(unsigned long) * 8)];
+
 	/* Here a PCI controller driver describes the areas of
 	 * PCI memory space where DMA to/from physical memory
 	 * are addressed.  Drivers interrogate the PCI layer
diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
index 0485b25..004e6f0 100644
--- a/include/linux/if_shaper.h
+++ b/include/linux/if_shaper.h
@@ -23,7 +23,7 @@ struct shaper
 	__u32 shapeclock;
 	unsigned long recovery;	/* Time we can next clock a packet out on
 				   an empty queue */
-        unsigned long locked;
+	struct semaphore sem;
         struct net_device_stats stats;
 	struct net_device *dev;
 	int  (*hard_start_xmit) (struct sk_buff *skb,
@@ -38,7 +38,6 @@ struct shaper
 	int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
 	void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char *  haddr);
 	struct net_device_stats* (*get_stats)(struct net_device *dev);
-	wait_queue_head_t  wait_queue;
 	struct timer_list timer;
 };
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e74f301..b009f80 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -467,12 +467,34 @@ static inline u8 ata_chk_status(struct ata_port *ap)
 	return ap->ops->check_status(ap);
 }
 
+
+/**
+ *	ata_pause - Flush writes and pause 400 nanoseconds.
+ *	@ap: Port to wait for.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
 static inline void ata_pause(struct ata_port *ap)
 {
 	ata_altstatus(ap);
 	ndelay(400);
 }
 
+
+/**
+ *	ata_busy_wait - Wait for a port status register
+ *	@ap: Port to wait for.
+ *
+ *	Waits up to max*10 microseconds for the selected bits in the port's
+ *	status register to be cleared.
+ *	Returns final value of status register.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
 static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
 			       unsigned int max)
 {
@@ -487,6 +509,18 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
 	return status;
 }
 
+
+/**
+ *	ata_wait_idle - Wait for a port to be idle.
+ *	@ap: Port to wait for.
+ *
+ *	Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ *	Returns final value of status register.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
 static inline u8 ata_wait_idle(struct ata_port *ap)
 {
 	u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
@@ -525,6 +559,18 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns
 		tf->device = ATA_DEVICE_OBS | ATA_DEV1;
 }
 
+
+/**
+ *	ata_irq_on - Enable interrupts on a port.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Enable interrupts on a legacy IDE device using MMIO or PIO,
+ *	wait for idle, clear any pending interrupts.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
 static inline u8 ata_irq_on(struct ata_port *ap)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -544,6 +590,18 @@ static inline u8 ata_irq_on(struct ata_port *ap)
 	return tmp;
 }
 
+
+/**
+ *	ata_irq_ack - Acknowledge a device interrupt.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Wait up to 10 ms for legacy IDE device to become idle (BUSY
+ *	or BUSY+DRQ clear).  Obtain dma status and port status from
+ *	device.  Clear the interrupt.  Return port status.
+ *
+ *	LOCKING:
+ */
+
 static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
 {
 	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 470af8c..ba5d123 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -204,7 +204,7 @@ struct hh_cache
 	/* cached hardware header; allow for machine alignment needs.        */
 #define HH_DATA_MOD	16
 #define HH_DATA_OFF(__len) \
-	(HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1)))
+	(HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
 #define HH_DATA_ALIGN(__len) \
 	(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
 	unsigned long	hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 7ccbc2e..b0d6134 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1230,6 +1230,12 @@
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
+#define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
+#define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO	0x026B
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 41d1a64..2d1ac50 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -796,6 +796,10 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
  * of the iso_frame_desc array, and the number of errors is reported in
  * error_count.  Completion callbacks for ISO transfers will normally
  * (re)submit URBs to ensure a constant transfer rate.
+ *
+ * Note that even fields marked "public" should not be touched by the driver
+ * when the urb is owned by the hcd, that is, since the call to
+ * usb_submit_urb() till the entry into the completion routine.
  */
 struct urb
 {
@@ -803,12 +807,12 @@ struct urb
 	struct kref kref;		/* reference count of the URB */
 	spinlock_t lock;		/* lock for the URB */
 	void *hcpriv;			/* private data for host controller */
-	struct list_head urb_list;	/* list pointer to all active urbs */
 	int bandwidth;			/* bandwidth for INT/ISO request */
 	atomic_t use_count;		/* concurrent submissions counter */
 	u8 reject;			/* submissions will fail */
 
 	/* public, documented fields in the urb that can be used by drivers */
+	struct list_head urb_list;	/* list head for use by the urb owner */
 	struct usb_device *dev; 	/* (in) pointer to associated device */
 	unsigned int pipe;		/* (in) pipe information */
 	int status;			/* (return) non-ISO status */
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 053a883..eae84cc 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -478,7 +478,7 @@ static int __init esp4_init(void)
 {
 	struct xfrm_decap_state decap;
 
-	if (sizeof(struct esp_decap_data)  <
+	if (sizeof(struct esp_decap_data)  >
 	    sizeof(decap.decap_data)) {
 		extern void decap_data_too_small(void);
 
diff --git a/net/ipv4/ipvs/Makefile b/net/ipv4/ipvs/Makefile
index a788461..30e85de 100644
--- a/net/ipv4/ipvs/Makefile
+++ b/net/ipv4/ipvs/Makefile
@@ -11,7 +11,7 @@ ip_vs_proto-objs-$(CONFIG_IP_VS_PROTO_AH) += ip_vs_proto_ah.o
 
 ip_vs-objs :=	ip_vs_conn.o ip_vs_core.o ip_vs_ctl.o ip_vs_sched.o	   \
 		ip_vs_xmit.o ip_vs_app.o ip_vs_sync.o	   		   \
-		ip_vs_est.o ip_vs_proto.o ip_vs_proto_icmp.o		   \
+		ip_vs_est.o ip_vs_proto.o 				   \
 		$(ip_vs_proto-objs-y)
 
 
diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c
index 253c462..867d4e9 100644
--- a/net/ipv4/ipvs/ip_vs_proto.c
+++ b/net/ipv4/ipvs/ip_vs_proto.c
@@ -216,9 +216,6 @@ int ip_vs_protocol_init(void)
 #ifdef CONFIG_IP_VS_PROTO_UDP
 	REGISTER_PROTOCOL(&ip_vs_protocol_udp);
 #endif
-#ifdef CONFIG_IP_VS_PROTO_ICMP
-	REGISTER_PROTOCOL(&ip_vs_protocol_icmp);
-#endif
 #ifdef CONFIG_IP_VS_PROTO_AH
 	REGISTER_PROTOCOL(&ip_vs_protocol_ah);
 #endif
diff --git a/net/ipv4/ipvs/ip_vs_proto_icmp.c b/net/ipv4/ipvs/ip_vs_proto_icmp.c
deleted file mode 100644
index 191e94a..0000000
--- a/net/ipv4/ipvs/ip_vs_proto_icmp.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * ip_vs_proto_icmp.c:	ICMP load balancing support for IP Virtual Server
- *
- * Authors:	Julian Anastasov <ja@ssi.bg>, March 2002
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		version 2 as published by the Free Software Foundation;
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/icmp.h>
-#include <linux/netfilter.h>
-#include <linux/netfilter_ipv4.h>
-
-#include <net/ip_vs.h>
-
-
-static int icmp_timeouts[1] =		{ 1*60*HZ };
-
-static char * icmp_state_name_table[1] = { "ICMP" };
-
-static struct ip_vs_conn *
-icmp_conn_in_get(const struct sk_buff *skb,
-		 struct ip_vs_protocol *pp,
-		 const struct iphdr *iph,
-		 unsigned int proto_off,
-		 int inverse)
-{
-#if 0
-	struct ip_vs_conn *cp;
-
-	if (likely(!inverse)) {
-		cp = ip_vs_conn_in_get(iph->protocol,
-			iph->saddr, 0,
-			iph->daddr, 0);
-	} else {
-		cp = ip_vs_conn_in_get(iph->protocol,
-			iph->daddr, 0,
-			iph->saddr, 0);
-	}
-
-	return cp;
-
-#else
-	return NULL;
-#endif
-}
-
-static struct ip_vs_conn *
-icmp_conn_out_get(const struct sk_buff *skb,
-		  struct ip_vs_protocol *pp,
-		  const struct iphdr *iph,
-		  unsigned int proto_off,
-		  int inverse)
-{
-#if 0
-	struct ip_vs_conn *cp;
-
-	if (likely(!inverse)) {
-		cp = ip_vs_conn_out_get(iph->protocol,
-			iph->saddr, 0,
-			iph->daddr, 0);
-	} else {
-		cp = ip_vs_conn_out_get(IPPROTO_UDP,
-			iph->daddr, 0,
-			iph->saddr, 0);
-	}
-
-	return cp;
-#else
-	return NULL;
-#endif
-}
-
-static int
-icmp_conn_schedule(struct sk_buff *skb, struct ip_vs_protocol *pp,
-		   int *verdict, struct ip_vs_conn **cpp)
-{
-	*verdict = NF_ACCEPT;
-	return 0;
-}
-
-static int
-icmp_csum_check(struct sk_buff *skb, struct ip_vs_protocol *pp)
-{
-	if (!(skb->nh.iph->frag_off & __constant_htons(IP_OFFSET))) {
-		if (skb->ip_summed != CHECKSUM_UNNECESSARY) {
-			if (ip_vs_checksum_complete(skb, skb->nh.iph->ihl * 4)) {
-				IP_VS_DBG_RL_PKT(0, pp, skb, 0, "Failed checksum for");
-				return 0;
-			}
-		}
-	}
-	return 1;
-}
-
-static void
-icmp_debug_packet(struct ip_vs_protocol *pp,
-		  const struct sk_buff *skb,
-		  int offset,
-		  const char *msg)
-{
-	char buf[256];
-	struct iphdr _iph, *ih;
-
-	ih = skb_header_pointer(skb, offset, sizeof(_iph), &_iph);
-	if (ih == NULL)
-		sprintf(buf, "%s TRUNCATED", pp->name);
-	else if (ih->frag_off & __constant_htons(IP_OFFSET))
-		sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u frag",
-			pp->name, NIPQUAD(ih->saddr),
-			NIPQUAD(ih->daddr));
-	else {
-		struct icmphdr _icmph, *ic;
-
-		ic = skb_header_pointer(skb, offset + ih->ihl*4,
-					sizeof(_icmph), &_icmph);
-		if (ic == NULL)
-			sprintf(buf, "%s TRUNCATED to %u bytes\n",
-				pp->name, skb->len - offset);
-		else
-			sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u T:%d C:%d",
-				pp->name, NIPQUAD(ih->saddr),
-				NIPQUAD(ih->daddr),
-				ic->type, ic->code);
-	}
-	printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
-}
-
-static int
-icmp_state_transition(struct ip_vs_conn *cp, int direction,
-		      const struct sk_buff *skb,
-		      struct ip_vs_protocol *pp)
-{
-	cp->timeout = pp->timeout_table[IP_VS_ICMP_S_NORMAL];
-	return 1;
-}
-
-static int
-icmp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
-	int num;
-	char **names;
-
-	num = IP_VS_ICMP_S_LAST;
-	names = icmp_state_name_table;
-	return ip_vs_set_state_timeout(pp->timeout_table, num, names, sname, to);
-}
-
-
-static void icmp_init(struct ip_vs_protocol *pp)
-{
-	pp->timeout_table = icmp_timeouts;
-}
-
-static void icmp_exit(struct ip_vs_protocol *pp)
-{
-}
-
-struct ip_vs_protocol ip_vs_protocol_icmp = {
-	.name =			"ICMP",
-	.protocol =		IPPROTO_ICMP,
-	.dont_defrag =		0,
-	.init =			icmp_init,
-	.exit =			icmp_exit,
-	.conn_schedule =	icmp_conn_schedule,
-	.conn_in_get =		icmp_conn_in_get,
-	.conn_out_get =		icmp_conn_out_get,
-	.snat_handler =		NULL,
-	.dnat_handler =		NULL,
-	.csum_check =		icmp_csum_check,
-	.state_transition =	icmp_state_transition,
-	.register_app =		NULL,
-	.unregister_app =	NULL,
-	.app_conn_bind =	NULL,
-	.debug_packet =		icmp_debug_packet,
-	.timeout_change =	NULL,
-	.set_state_timeout =	icmp_set_state_timeout,
-};
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index e5746b6..eda1fba 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -3,6 +3,7 @@
  * communicating with userspace via netlink.
  *
  * (C) 2000-2002 James Morris <jmorris@intercode.com.au>
+ * (C) 2003-2005 Netfilter Core Team <coreteam@netfilter.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,6 +18,7 @@
  * 2005-01-10: Added /proc counter for dropped packets; fixed so
  *             packets aren't delivered to user space if they're going 
  *             to be dropped. 
+ * 2005-05-26: local_bh_{disable,enable} around nf_reinject (Harald Welte)
  *
  */
 #include <linux/module.h>
@@ -71,7 +73,15 @@ static DECLARE_MUTEX(ipqnl_sem);
 static void
 ipq_issue_verdict(struct ipq_queue_entry *entry, int verdict)
 {
+	/* TCP input path (and probably other bits) assume to be called
+	 * from softirq context, not from syscall, like ipq_issue_verdict is
+	 * called.  TCP input path deadlocks with locks taken from timer
+	 * softirq, e.g.  We therefore emulate this by local_bh_disable() */
+
+	local_bh_disable();
 	nf_reinject(entry->skb, entry->info, verdict);
+	local_bh_enable();
+
 	kfree(entry);
 }
 
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 4a6952e..7c24e64 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -738,7 +738,7 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 			unsigned long amount;
 
 			amount = 0;
-			spin_lock_irq(&sk->sk_receive_queue.lock);
+			spin_lock_bh(&sk->sk_receive_queue.lock);
 			skb = skb_peek(&sk->sk_receive_queue);
 			if (skb != NULL) {
 				/*
@@ -748,7 +748,7 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 				 */
 				amount = skb->len - sizeof(struct udphdr);
 			}
-			spin_unlock_irq(&sk->sk_receive_queue.lock);
+			spin_unlock_bh(&sk->sk_receive_queue.lock);
 			return put_user(amount, (int __user *)arg);
 		}
 
@@ -848,12 +848,12 @@ csum_copy_err:
 	/* Clear queue. */
 	if (flags&MSG_PEEK) {
 		int clear = 0;
-		spin_lock_irq(&sk->sk_receive_queue.lock);
+		spin_lock_bh(&sk->sk_receive_queue.lock);
 		if (skb == skb_peek(&sk->sk_receive_queue)) {
 			__skb_unlink(skb, &sk->sk_receive_queue);
 			clear = 1;
 		}
-		spin_unlock_irq(&sk->sk_receive_queue.lock);
+		spin_unlock_bh(&sk->sk_receive_queue.lock);
 		if (clear)
 			kfree_skb(skb);
 	}
@@ -1334,7 +1334,7 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait)
 		struct sk_buff_head *rcvq = &sk->sk_receive_queue;
 		struct sk_buff *skb;
 
-		spin_lock_irq(&rcvq->lock);
+		spin_lock_bh(&rcvq->lock);
 		while ((skb = skb_peek(rcvq)) != NULL) {
 			if (udp_checksum_complete(skb)) {
 				UDP_INC_STATS_BH(UDP_MIB_INERRORS);
@@ -1345,7 +1345,7 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait)
 				break;
 			}
 		}
-		spin_unlock_irq(&rcvq->lock);
+		spin_unlock_bh(&rcvq->lock);
 
 		/* nothing to see, move along */
 		if (skb == NULL)
diff --git a/net/ipv6/ipv6_syms.c b/net/ipv6/ipv6_syms.c
index 2f4c91d..5ade5a5 100644
--- a/net/ipv6/ipv6_syms.c
+++ b/net/ipv6/ipv6_syms.c
@@ -37,5 +37,4 @@ EXPORT_SYMBOL(in6_dev_finish_destroy);
 EXPORT_SYMBOL(xfrm6_rcv);
 #endif
 EXPORT_SYMBOL(rt6_lookup);
-EXPORT_SYMBOL(fl6_sock_lookup);
 EXPORT_SYMBOL(ipv6_push_nfrag_opts);
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 8a3db9d..d8bd2a5 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -18,7 +18,7 @@
 #include <asm/byteorder.h>
 
 
-#if 1 /* control */
+#if 0 /* control */
 #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
 #else
 #define DPRINTK(format,args...)
@@ -73,8 +73,13 @@ static int dsmark_graft(struct Qdisc *sch,unsigned long arg,
 
 	DPRINTK("dsmark_graft(sch %p,[qdisc %p],new %p,old %p)\n",sch,p,new,
 	    old);
-	if (!new)
-		new = &noop_qdisc;
+
+	if (new == NULL) {
+		new = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops);
+		if (new == NULL)
+			new = &noop_qdisc;
+	}
+
 	sch_tree_lock(sch);
 	*old = xchg(&p->q,new);
 	if (*old)
@@ -163,14 +168,15 @@ static void dsmark_walk(struct Qdisc *sch,struct qdisc_walker *walker)
 		return;
 	for (i = 0; i < p->indices; i++) {
 		if (p->mask[i] == 0xff && !p->value[i])
-			continue;
+			goto ignore;
 		if (walker->count >= walker->skip) {
 			if (walker->fn(sch, i+1, walker) < 0) {
 				walker->stop = 1;
 				break;
 			}
 		}
-                walker->count++;
+ignore:		
+		walker->count++;
         }
 }