Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (68 commits) hwmon: (it87) Add support for the IT8721F/IT8758E hwmon: (it87) Move conversion functions hwmon: Remove many EXPERIMENTAL flags hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode hwmon: (lm85) Document the ADT7468 as supported hwmon: (lm85) Fix ADT7468 frequency table hwmon: I2C addresses are constant Move ams driver to macintosh hwmon: (pcf8591) Don't attempt to detect devices hwmon: (pcf8591) Register as a hwmon device hwmon: (w83795) Use standard attributes for chassis intrusion hwmon: (w83795) Exclude fan control feature by default hwmon: (w83795) Add myself as co-author and maintainer hwmon: (w83795) More style cleanups hwmon: (w83795) Fix LSB reading of voltage limits hwmon: (w83795) Use dev_get_drvdata() where possible hwmon: (w83795) Delay reading pwm config registers hwmon: (w83795) Delay reading limit registers hwmon: (w83795) Move register reads to dedicated functions hwmon: (w83795) Pack similar register reads ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2010-10-28 12:17:00 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2010-10-28 12:17:00 -0700
commit: 150cd843fac0160fce616fb3e5cbe64e9db7481e (patch)
tree: eca7ed23a2238665462ff92fe6e9b591da3e092a
parent: f063a0c0c995d010960efcc1b2ed14b99674f25c (diff)
parent: 44c1bcd4bcde32b2a31a6775a277706ab489c0dc (diff)
download: op-kernel-dev-150cd843fac0160fce616fb3e5cbe64e9db7481e.zip
op-kernel-dev-150cd843fac0160fce616fb3e5cbe64e9db7481e.tar.gz
27 files changed, 3284 insertions, 556 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8d08bf0..38425f0 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'it8720'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8721F/IT8758E
+    Prefix: 'it8721'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -67,7 +71,7 @@ Description
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8726F and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -86,14 +90,15 @@ the driver won't notice and report changes in the VID value. The two
 upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
-The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for
-2 additional fans. The additional fans are supported by the driver.
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
+have support for 2 additional fans. The additional fans are supported by the
+driver.
 
-The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have
-optional 16-bit tachometer counters for fans 1 to 3. This is better (no more
-fan clock divider mess) but not compatible with the older chips and
-revisions. The 16-bit tachometer mode is enabled by the driver when one
-of the above chips is detected.
+The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
+IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
+is better (no more fan clock divider mess) but not compatible with the older
+chips and revisions. The 16-bit tachometer mode is enabled by the driver when
+one of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
@@ -115,7 +120,12 @@ alarm is triggered if the voltage has crossed a programmable minimum or
 maximum limit. Note that minimum in this case always means 'closest to
 zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt. The battery voltage in8 does not have limit registers.
+0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
+not have limit registers.
+
+On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
+the chip (in7, in8 and optionally in3). The driver handles this transparently
+so user-space doesn't have to care.
 
 The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
 the voltage level your processor should work with. This is hardcoded by
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index b98e0e0..239258a 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'adt7463'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
+  * Analog Devices ADT7468
+    Prefix: 'adt7468'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468
   * SMSC EMC6D100, SMSC EMC6D101
     Prefix: 'emc6d100'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
@@ -34,7 +38,7 @@ Description
 -----------
 
 This driver implements support for the National Semiconductor LM85 and
-compatible chips including the Analog Devices ADM1027, ADT7463 and
+compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and
 SMSC EMC6D10x chips family.
 
 The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
@@ -87,14 +91,22 @@ To smooth the response of fans to changes in temperature, the LM85 has an
 optional filter for smoothing temperatures. The ADM1027 has the same
 config option but uses it to rate limit the changes to fan speed instead.
 
-The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure
-temperatures with 0.25 degC resolution. They also provide an offset to the
-temperature readings that is automatically applied during measurement.
-This offset can be used to zero out any errors due to traces and placement.
-The documentation says that the offset is in 0.25 degC steps, but in
-initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
-confirmed this "bug". The ADT7463 is reported to work as described in the
-documentation. The current lm85 driver does not show the offset register.
+The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore
+measure temperatures with 0.25 degC resolution. They also provide an offset
+to the temperature readings that is automatically applied during
+measurement. This offset can be used to zero out any errors due to traces
+and placement. The documentation says that the offset is in 0.25 degC
+steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog
+Devices has confirmed this "bug". The ADT7463 is reported to work as
+described in the documentation. The current lm85 driver does not show the
+offset register.
+
+The ADT7468 has a high-frequency PWM mode, where all PWM outputs are
+driven by a 22.5 kHz clock. This is a global mode, not per-PWM output,
+which means that setting any PWM frequency above 11.3 kHz will switch
+all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM
+frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency
+between 10 and 100 Hz, which can then be tuned separately.
 
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
@@ -125,17 +137,17 @@ datasheet for a complete description of the differences. Other than
 identifying the chip, the driver behaves no differently with regard to
 these two chips. The LM85B is recommended for new designs.
 
-The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be
-used to signal the chipset in case a limit is exceeded or the temperature
-sensors fail. Individual sensor interrupts can be masked so they won't
-trigger SMBALERT. The SMBALERT output if configured replaces one of the other
-functions (PWM2 or IN0). This functionality is not implemented in current
-driver.
+The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output
+that can be used to signal the chipset in case a limit is exceeded or the
+temperature sensors fail. Individual sensor interrupts can be masked so
+they won't trigger SMBALERT. The SMBALERT output if configured replaces one
+of the other functions (PWM2 or IN0). This functionality is not implemented
+in current driver.
 
-The ADT7463 also has an optional THERM output/input which can be connected
-to the processor PROC_HOT output. If available, the autofan control
-dynamic Tmin feature can be enabled to keep the system temperature within
-spec (just?!) with the least possible fan noise.
+The ADT7463 and ADT7468 also have an optional THERM output/input which can
+be connected to the processor PROC_HOT output. If available, the autofan
+control dynamic Tmin feature can be enabled to keep the system temperature
+within spec (just?!) with the least possible fan noise.
 
 Configuration Notes
 -------------------
@@ -201,8 +213,8 @@ the temperatures to compensate for systemic errors in the
 measurements. These features are not currently supported by the lm85
 driver.
 
-In addition to the ADM1027 features, the ADT7463 also has Tmin control
-and THERM asserted counts. Automatic Tmin control acts to adjust the
-Tmin value to maintain the measured temperature sensor at a specified
-temperature. There isn't much documentation on this feature in the
-ADT7463 data sheet. This is not supported by current driver.
+In addition to the ADM1027 features, the ADT7463 and ADT7468 also have
+Tmin control and THERM asserted counts. Automatic Tmin control acts to
+adjust the Tmin value to maintain the measured temperature sensor at a
+specified temperature. There isn't much documentation on this feature in
+the ADT7463 data sheet. This is not supported by current driver.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 6a03dd4..fa475c0 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -63,8 +63,8 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
   * Maxim MAX6659
-    Prefix: 'max6657'
-    Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
+    Prefix: 'max6659'
+    Addresses scanned: I2C 0x4c, 0x4d, 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
   * Maxim MAX6680
@@ -84,6 +84,21 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+  * Maxim MAX6695
+    Prefix: 'max6695'
+    Addresses scanned: I2C 0x18
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+  * Maxim MAX6696
+    Prefix: 'max6695'
+    Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+                           0x4c, 0x4d and 0x4e
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+  * Winbond/Nuvoton W83L771W/G
+    Prefix: 'w83l771'
+    Addresses scanned: I2C 0x4c
+    Datasheet: No longer available
   * Winbond/Nuvoton W83L771AWG/ASG
     Prefix: 'w83l771'
     Addresses scanned: I2C 0x4c
@@ -101,10 +116,11 @@ well as the temperature of up to one external diode. It is compatible
 with many other devices, many of which are supported by this driver.
 
 Note that there is no easy way to differentiate between the MAX6657,
-MAX6658 and MAX6659 variants. The extra address and features of the
-MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only
-differ in their pinout, therefore they obviously can't (and don't need to)
-be distinguished.
+MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
+supported by this driver if the chip is located at address 0x4d or 0x4e,
+or if the chip type is explicitly selected as max6659.
+The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
+can't (and don't need to) be distinguished.
 
 The specificity of this family of chipsets over the ADM1021/LM84
 family is that it features critical limits with hysteresis, and an
@@ -151,11 +167,21 @@ MAX6680 and MAX6681:
   * Selectable address
   * Remote sensor type selection
 
+MAX6695 and MAX6696:
+  * Better local resolution
+  * Selectable address (max6696)
+  * Second critical temperature limit
+  * Two remote sensors
+
+W83L771W/G
+  * The G variant is lead-free, otherwise similar to the W.
+  * Filter and alert configuration register at 0xBF
+  * Moving average (depending on conversion rate)
+
 W83L771AWG/ASG
+  * Successor of the W83L771W/G, same features.
   * The AWG and ASG variants only differ in package format.
-  * Filter and alert configuration register at 0xBF
   * Diode ideality factor configuration (remote sensor) at 0xE3
-  * Moving average (depending on conversion rate)
 
 All temperature values are given in degrees Celsius. Resolution
 is 1.0 degree for the local temperature, 0.125 degree for the remote
diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591
index e76a789..ac020b3 100644
--- a/Documentation/hwmon/pcf8591
+++ b/Documentation/hwmon/pcf8591
@@ -4,7 +4,7 @@ Kernel driver pcf8591
 Supported chips:
   * Philips/NXP PCF8591
     Prefix: 'pcf8591'
-    Addresses scanned: I2C 0x48 - 0x4f
+    Addresses scanned: none
     Datasheet: Publicly available at the NXP website
                http://www.nxp.com/pip/PCF8591_6.html
 
@@ -58,18 +58,16 @@ Module parameters
 Accessing PCF8591 via /sys interface
 -------------------------------------
 
-! Be careful !
-The PCF8591 is plainly impossible to detect! Stupid chip.
-So every chip with address in the interval [0x48..0x4f] is
-detected as PCF8591. If you have other chips in this address
-range, the workaround is to load this module after the one
-for your others chips.
+The PCF8591 is plainly impossible to detect! Thus the driver won't even
+try. You have to explicitly instantiate the device at the relevant
+address (in the interval [0x48..0x4f]) either through platform data, or
+using the sysfs interface. See Documentation/i2c/instantiating-devices
+for details.
 
-On detection (i.e. insmod, modprobe et al.), directories are being
-created for each detected PCF8591:
+Directories are being created for each instantiated PCF8591:
 
 /sys/bus/i2c/devices/<0>-<1>/
-where <0> is the bus the chip was detected on (e. g. i2c-0)
+where <0> is the bus the chip is connected to (e. g. i2c-0)
 and <1> the chip address ([48..4f])
 
 Inside these directories, there are such files:
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 48ceabe..6456990 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -309,6 +309,20 @@ temp[1-*]_crit_hyst
 		from the critical value.
 		RW
 
+temp[1-*]_emergency
+		Temperature emergency max value, for chips supporting more than
+		two upper temperature limits. Must be equal or greater than
+		corresponding temp_crit values.
+		Unit: millidegree Celsius
+		RW
+
+temp[1-*]_emergency_hyst
+		Temperature hysteresis value for emergency limit.
+		Unit: millidegree Celsius
+		Must be reported as an absolute temperature, NOT a delta
+		from the emergency value.
+		RW
+
 temp[1-*]_lcrit	Temperature critical min value, typically lower than
 		corresponding temp_min values.
 		Unit: millidegree Celsius
@@ -505,6 +519,7 @@ fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm
+temp[1-*]_emergency_alarm
 		Limit alarm
 		0: no alarm
 		1: alarm
diff --git a/MAINTAINERS b/MAINTAINERS
index ba9480e..d0c2206 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -432,7 +432,7 @@ AMS (Apple Motion Sensor) DRIVER
 M:	Stelian Pop <stelian@popies.net>
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
-F:	drivers/hwmon/ams/
+F:	drivers/macintosh/ams/
 
 AMSO1100 RNIC DRIVER
 M:	Tom Tucker <tom@opengridcomputing.com>
@@ -6465,6 +6465,12 @@ S:	Maintained
 F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
+W83795 HARDWARE MONITORING DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/w83795.c
+
 W83L51xD SD/MMC CARD INTERFACE DRIVER
 M:	Pierre Ossman <pierre@ossman.eu>
 S:	Maintained
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c357c83..a56f6ad 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -129,7 +129,7 @@ config SENSORS_ADM1025
 
 config SENSORS_ADM1026
 	tristate "Analog Devices ADM1026 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for Analog Devices ADM1026
@@ -140,7 +140,7 @@ config SENSORS_ADM1026
 
 config SENSORS_ADM1029
 	tristate "Analog Devices ADM1029"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for Analog Devices ADM1029
 	  sensor chip.
@@ -151,7 +151,7 @@ config SENSORS_ADM1029
 
 config SENSORS_ADM1031
 	tristate "Analog Devices ADM1031 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for Analog Devices ADM1031
 	  and ADM1030 sensor chips.
@@ -202,7 +202,7 @@ config SENSORS_ADT7470
 
 config SENSORS_ADT7475
 	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Analog Devices
@@ -249,32 +249,6 @@ config SENSORS_K10TEMP
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
 
-config SENSORS_AMS
-	tristate "Apple Motion Sensor driver"
-	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
-	select INPUT_POLLDEV
-	help
-	  Support for the motion sensor included in PowerBooks. Includes
-	  implementations for PMU and I2C.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called ams.
-
-config SENSORS_AMS_PMU
-	bool "PMU variant"
-	depends on SENSORS_AMS && ADB_PMU
-	default y
-	help
-	  PMU variant of motion sensor, found in late 2005 PowerBooks.
-
-config SENSORS_AMS_I2C
-	bool "I2C variant"
-	depends on SENSORS_AMS && I2C
-	default y
-	help
-	  I2C variant of motion sensor, found in early 2005 PowerBooks and
-	  iBooks.
-
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on X86 && I2C && EXPERIMENTAL
@@ -322,7 +296,6 @@ config SENSORS_I5K_AMB
 
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
-	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
 	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
@@ -333,7 +306,6 @@ config SENSORS_F71805F
 
 config SENSORS_F71882FG
 	tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
-	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
 	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
@@ -343,8 +315,8 @@ config SENSORS_F71882FG
 	  will be called f71882fg.
 
 config SENSORS_F75375S
-	tristate "Fintek F75375S/SP and F75373";
-	depends on I2C && EXPERIMENTAL
+	tristate "Fintek F75375S/SP and F75373"
+	depends on I2C
 	help
 	  If you say yes here you get support for hardware monitoring
 	  features of the Fintek F75375S/SP and F75373
@@ -456,8 +428,8 @@ config SENSORS_IT87
 	select HWMON_VID
 	help
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
-	  IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
-	  SiS960 clone.
+	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
+	  chips, and the SiS960 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
@@ -499,7 +471,7 @@ config SENSORS_LM63
 
 config SENSORS_LM70
 	tristate "National Semiconductor LM70 / Texas Instruments TMP121"
-	depends on SPI_MASTER && EXPERIMENTAL
+	depends on SPI_MASTER
 	help
 	  If you say yes here you get support for the National Semiconductor
 	  LM70 and Texas Instruments TMP121/TMP123 digital temperature
@@ -567,7 +539,7 @@ config SENSORS_LM78
 
 config SENSORS_LM80
 	tristate "National Semiconductor LM80"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for National Semiconductor
 	  LM80 sensor chips.
@@ -587,11 +559,12 @@ config SENSORS_LM83
 
 config SENSORS_LM85
 	tristate "National Semiconductor LM85 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for National Semiconductor LM85
-	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
+	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
+	  EMC6D101 and EMC6D102.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.
@@ -614,8 +587,8 @@ config SENSORS_LM90
 	  If you say yes here you get support for National Semiconductor LM90,
 	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
-	  MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
-	  sensor chips.
+	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
+	  W83L771W/G/AWG/ASG sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
@@ -726,7 +699,6 @@ config SENSORS_PC87360
 
 config SENSORS_PC87427
 	tristate "National Semiconductor PC87427"
-	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get access to the hardware monitoring
 	  functions of the National Semiconductor PC87427 Super-I/O chip.
@@ -763,14 +735,14 @@ config SENSORS_SHT15
 	  will be called sht15.
 
 config SENSORS_S3C
-	tristate "S3C24XX/S3C64XX Inbuilt ADC"
-	depends on ARCH_S3C2410
+	tristate "Samsung built-in ADC"
+	depends on S3C_ADC
 	help
 	  If you say yes here you get support for the on-board ADCs of
-	  the Samsung S3C24XX or S3C64XX series of SoC
+	  the Samsung S3C24XX, S3C64XX and other series of SoC
 
 	  This driver can also be built as a module. If so, the module
-	  will be called s3c-hwmo.
+	  will be called s3c-hwmon.
 
 config SENSORS_S3C_RAW
 	bool "Include raw channel attributes in sysfs"
@@ -854,7 +826,7 @@ config SENSORS_SMSC47M1
 
 config SENSORS_SMSC47M192
 	tristate "SMSC LPC47M192 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the temperature and
@@ -910,7 +882,7 @@ config SENSORS_AMC6821
 
 config SENSORS_THMC50
 	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for Texas Instruments THMC50
 	  sensor chips and clones: the Analog Devices ADM1022.
@@ -968,7 +940,6 @@ config SENSORS_VIA686A
 
 config SENSORS_VT1211
 	tristate "VIA VT1211"
-	depends on EXPERIMENTAL
 	select HWMON_VID
 	help
 	  If you say yes here then you get support for hardware monitoring
@@ -1012,7 +983,7 @@ config SENSORS_W83791D
 
 config SENSORS_W83792D
 	tristate "Winbond W83792D"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for the Winbond W83792D chip.
 
@@ -1031,6 +1002,33 @@ config SENSORS_W83793
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83793.
 
+config SENSORS_W83795
+	tristate "Winbond/Nuvoton W83795G/ADG"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Winbond W83795G and
+	  W83795ADG hardware monitoring chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83795.
+
+config SENSORS_W83795_FANCTRL
+	boolean "Include fan control support (DANGEROUS)"
+	depends on SENSORS_W83795 && EXPERIMENTAL
+	default n
+	help
+	  If you say yes here, support for the both manual and automatic
+	  fan control features will be included in the driver.
+
+	  This part of the code wasn't carefully reviewed and tested yet,
+	  so enabling this option is strongly discouraged on production
+	  servers. Only developers and testers should enable it for the
+	  time being.
+
+	  Please also note that this option will create sysfs attribute
+	  files which may change in the future, so you shouldn't rely
+	  on them being stable.
+
 config SENSORS_W83L785TS
 	tristate "Winbond W83L785TS-S"
 	depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d30f0f6..2479b3d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
 obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
 obj-$(CONFIG_SENSORS_W83792D)	+= w83792d.o
 obj-$(CONFIG_SENSORS_W83793)	+= w83793.o
+obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
@@ -35,7 +36,6 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
-obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index a0c3851..b5fcd87 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -146,7 +146,7 @@
 #define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
 #define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
 
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 enum chips { adt7473, adt7475, adt7476, adt7490 };
 
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index 89b4f3b..d2596ce 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -28,7 +28,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
 	0x2c, 0x2d, 0x2e, I2C_CLIENT_END
 };
 
@@ -52,7 +52,7 @@ struct asc7621_chip {
 	u8 company_id;
 	u8 verstep_reg;
 	u8 verstep_id;
-	unsigned short *addresses;
+	const unsigned short *addresses;
 };
 
 static struct asc7621_chip asc7621_chips[] = {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f770129..14a5d98 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -15,7 +15,9 @@
  *            IT8716F  Super I/O chip w/LPC interface
  *            IT8718F  Super I/O chip w/LPC interface
  *            IT8720F  Super I/O chip w/LPC interface
+ *            IT8721F  Super I/O chip w/LPC interface
  *            IT8726F  Super I/O chip w/LPC interface
+ *            IT8758E  Super I/O chip w/LPC interface
  *            Sis950   A clone of the IT8705F
  *
  *  Copyright (C) 2001 Chris Gauthron
@@ -54,7 +56,7 @@
 
 #define DRVNAME "it87"
 
-enum chips { it87, it8712, it8716, it8718, it8720 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -126,6 +128,7 @@ superio_exit(void)
 #define IT8716F_DEVID 0x8716
 #define IT8718F_DEVID 0x8718
 #define IT8720F_DEVID 0x8720
+#define IT8721F_DEVID 0x8721
 #define IT8726F_DEVID 0x8726
 #define IT87_ACT_REG  0x30
 #define IT87_BASE_REG 0x60
@@ -202,56 +205,6 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 #define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
 #define IT87_REG_AUTO_PWM(nr, i)  (0x65 + (nr) * 8 + (i))
 
-#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
-#define IN_FROM_REG(val) ((val) * 16)
-
-static inline u8 FAN_TO_REG(long rpm, int div)
-{
-	if (rpm == 0)
-		return 255;
-	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
-	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
-			     254);
-}
-
-static inline u16 FAN16_TO_REG(long rpm)
-{
-	if (rpm == 0)
-		return 0xffff;
-	return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
-}
-
-#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
-/* The divider is fixed to 2 in 16-bit mode */
-#define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2))
-
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
-					((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) ((val) * 1000)
-
-#define PWM_TO_REG(val)   ((val) >> 1)
-#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
-
-static int DIV_TO_REG(int val)
-{
-	int answer = 0;
-	while (answer < 7 && (val >>= 1))
-		answer++;
-	return answer;
-}
-#define DIV_FROM_REG(val) (1 << (val))
-
-static const unsigned int pwm_freq[8] = {
-	48000000 / 128,
-	24000000 / 128,
-	12000000 / 128,
-	8000000 / 128,
-	6000000 / 128,
-	3000000 / 128,
-	1500000 / 128,
-	750000 / 128,
-};
-
 
 struct it87_sio_data {
 	enum chips type;
@@ -279,6 +232,7 @@ struct it87_data {
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
+	u16 in_scaled;		/* Internal voltage sensors are scaled */
 	u8 in[9];		/* Register value */
 	u8 in_max[8];		/* Register value */
 	u8 in_min[8];		/* Register value */
@@ -310,6 +264,96 @@ struct it87_data {
 	s8 auto_temp[3][5];	/* [nr][0] is point1_temp_hyst */
 };
 
+static u8 in_to_reg(const struct it87_data *data, int nr, long val)
+{
+	long lsb;
+
+	if (data->type == it8721) {
+		if (data->in_scaled & (1 << nr))
+			lsb = 24;
+		else
+			lsb = 12;
+	} else
+		lsb = 16;
+
+	val = DIV_ROUND_CLOSEST(val, lsb);
+	return SENSORS_LIMIT(val, 0, 255);
+}
+
+static int in_from_reg(const struct it87_data *data, int nr, int val)
+{
+	if (data->type == it8721) {
+		if (data->in_scaled & (1 << nr))
+			return val * 24;
+		else
+			return val * 12;
+	} else
+		return val * 16;
+}
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+static inline u16 FAN16_TO_REG(long rpm)
+{
+	if (rpm == 0)
+		return 0xffff;
+	return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
+				1350000 / ((val) * (div)))
+/* The divider is fixed to 2 in 16-bit mode */
+#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+			     1350000 / ((val) * 2))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (((val) - 500) / 1000) : \
+					((val) + 500) / 1000), -128, 127))
+#define TEMP_FROM_REG(val) ((val) * 1000)
+
+static u8 pwm_to_reg(const struct it87_data *data, long val)
+{
+	if (data->type == it8721)
+		return val;
+	else
+		return val >> 1;
+}
+
+static int pwm_from_reg(const struct it87_data *data, u8 reg)
+{
+	if (data->type == it8721)
+		return reg;
+	else
+		return (reg & 0x7f) << 1;
+}
+
+
+static int DIV_TO_REG(int val)
+{
+	int answer = 0;
+	while (answer < 7 && (val >>= 1))
+		answer++;
+	return answer;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+static const unsigned int pwm_freq[8] = {
+	48000000 / 128,
+	24000000 / 128,
+	12000000 / 128,
+	8000000 / 128,
+	6000000 / 128,
+	3000000 / 128,
+	1500000 / 128,
+	750000 / 128,
+};
+
 static inline int has_16bit_fans(const struct it87_data *data)
 {
 	/* IT8705F Datasheet 0.4.1, 3h == Version G.
@@ -319,7 +363,8 @@ static inline int has_16bit_fans(const struct it87_data *data)
 	    || (data->type == it8712 && data->revision >= 0x08)
 	    || data->type == it8716
 	    || data->type == it8718
-	    || data->type == it8720;
+	    || data->type == it8720
+	    || data->type == it8721;
 }
 
 static inline int has_old_autopwm(const struct it87_data *data)
@@ -357,7 +402,7 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+	return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr]));
 }
 
 static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
@@ -367,7 +412,7 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+	return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_min[nr]));
 }
 
 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
@@ -377,7 +422,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+	return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_max[nr]));
 }
 
 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
@@ -393,7 +438,7 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->in_min[nr] = IN_TO_REG(val);
+	data->in_min[nr] = in_to_reg(data, nr, val);
 	it87_write_value(data, IT87_REG_VIN_MIN(nr),
 			data->in_min[nr]);
 	mutex_unlock(&data->update_lock);
@@ -412,7 +457,7 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->in_max[nr] = IN_TO_REG(val);
+	data->in_max[nr] = in_to_reg(data, nr, val);
 	it87_write_value(data, IT87_REG_VIN_MAX(nr),
 			data->in_max[nr]);
 	mutex_unlock(&data->update_lock);
@@ -642,7 +687,8 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm_duty[nr]));
+	return sprintf(buf, "%d\n",
+		       pwm_from_reg(data, data->pwm_duty[nr]));
 }
 static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -812,7 +858,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->pwm_duty[nr] = PWM_TO_REG(val);
+	data->pwm_duty[nr] = pwm_to_reg(data, val);
 	/* If we are in manual mode, write the duty cycle immediately;
 	 * otherwise, just store it for later use. */
 	if (!(data->pwm_ctrl[nr] & 0x80)) {
@@ -916,7 +962,8 @@ static ssize_t show_auto_pwm(struct device *dev,
 	int nr = sensor_attr->nr;
 	int point = sensor_attr->index;
 
-	return sprintf(buf, "%d\n", PWM_FROM_REG(data->auto_pwm[nr][point]));
+	return sprintf(buf, "%d\n",
+		       pwm_from_reg(data, data->auto_pwm[nr][point]));
 }
 
 static ssize_t set_auto_pwm(struct device *dev,
@@ -933,7 +980,7 @@ static ssize_t set_auto_pwm(struct device *dev,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->auto_pwm[nr][point] = PWM_TO_REG(val);
+	data->auto_pwm[nr][point] = pwm_to_reg(data, val);
 	it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
 			 data->auto_pwm[nr][point]);
 	mutex_unlock(&data->update_lock);
@@ -1203,9 +1250,16 @@ static ssize_t show_label(struct device *dev, struct device_attribute *attr,
 		"5VSB",
 		"Vbat",
 	};
+	static const char *labels_it8721[] = {
+		"+3.3V",
+		"3VSB",
+		"Vbat",
+	};
+	struct it87_data *data = dev_get_drvdata(dev);
 	int nr = to_sensor_dev_attr(attr)->index;
 
-	return sprintf(buf, "%s\n", labels[nr]);
+	return sprintf(buf, "%s\n", data->type == it8721 ? labels_it8721[nr]
+							 : labels[nr]);
 }
 static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
 static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
@@ -1490,6 +1544,9 @@ static int __init it87_find(unsigned short *address,
 	case IT8720F_DEVID:
 		sio_data->type = it8720;
 		break;
+	case IT8721F_DEVID:
+		sio_data->type = it8721;
+		break;
 	case 0xffff:	/* No device at all */
 		goto exit;
 	default:
@@ -1530,11 +1587,17 @@ static int __init it87_find(unsigned short *address,
 		int reg;
 
 		superio_select(GPIO);
-		/* We need at least 4 VID pins */
+
 		reg = superio_inb(IT87_SIO_GPIO3_REG);
-		if (reg & 0x0f) {
-			pr_info("it87: VID is disabled (pins used for GPIO)\n");
+		if (sio_data->type == it8721) {
+			/* The IT8721F/IT8758E doesn't have VID pins at all */
 			sio_data->skip_vid = 1;
+		} else {
+			/* We need at least 4 VID pins */
+			if (reg & 0x0f) {
+				pr_info("it87: VID is disabled (pins used for GPIO)\n");
+				sio_data->skip_vid = 1;
+			}
 		}
 
 		/* Check if fan3 is there or not */
@@ -1572,7 +1635,7 @@ static int __init it87_find(unsigned short *address,
 		}
 		if (reg & (1 << 0))
 			sio_data->internal |= (1 << 0);
-		if (reg & (1 << 1))
+		if ((reg & (1 << 1)) || sio_data->type == it8721)
 			sio_data->internal |= (1 << 1);
 
 		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
@@ -1650,6 +1713,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		"it8716",
 		"it8718",
 		"it8720",
+		"it8721",
 	};
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1686,6 +1750,16 @@ static int __devinit it87_probe(struct platform_device *pdev)
 	/* Check PWM configuration */
 	enable_pwm_interface = it87_check_pwm(dev);
 
+	/* Starting with IT8721F, we handle scaling of internal voltages */
+	if (data->type == it8721) {
+		if (sio_data->internal & (1 << 0))
+			data->in_scaled |= (1 << 3);	/* in3 is AVCC */
+		if (sio_data->internal & (1 << 1))
+			data->in_scaled |= (1 << 7);	/* in7 is VSB */
+		if (sio_data->internal & (1 << 2))
+			data->in_scaled |= (1 << 8);	/* in8 is Vbat */
+	}
+
 	/* Initialize the IT87 chip */
 	it87_init_device(pdev);
 
@@ -2051,7 +2125,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 
 		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
 		/* The 8705 does not have VID capability.
-		   The 8718 and the 8720 don't use IT87_REG_VID for the
+		   The 8718 and later don't use IT87_REG_VID for the
 		   same purpose. */
 		if (data->type == it8712 || data->type == it8716) {
 			data->vid = it87_read_value(data, IT87_REG_VID);
@@ -2151,7 +2225,7 @@ static void __exit sm_it87_exit(void)
 
 MODULE_AUTHOR("Chris Gauthron, "
 	      "Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver");
+MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
 module_param(update_vbat, bool, 0);
 MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
 module_param(fix_pwm_polarity, bool, 0);
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 39ead2a..418496f 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -191,38 +191,31 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 	model = boot_cpu_data.x86_model;
 	stepping = boot_cpu_data.x86_mask;
 
-	switch (boot_cpu_data.x86) {
-	case 0xf:
-		/* feature available since SH-C0, exclude older revisions */
-		if (((model == 4) && (stepping == 0)) ||
-		    ((model == 5) && (stepping <= 1))) {
-			err = -ENODEV;
-			goto exit_free;
-		}
-
-		/*
-		 * AMD NPT family 0fh, i.e. RevF and RevG:
-		 * meaning of SEL_CORE bit is inverted
-		 */
-		if (model >= 0x40) {
-			data->swap_core_select = 1;
-			dev_warn(&pdev->dev, "Temperature readouts might be "
-				 "wrong - check erratum #141\n");
-		}
-
-		if (is_rev_g_desktop(model)) {
-			/*
-			 * RevG desktop CPUs (i.e. no socket S1G1 or
-			 * ASB1 parts) need additional offset,
-			 * otherwise reported temperature is below
-			 * ambient temperature
-			 */
-			data->temp_offset = 21000;
-		}
+	/* feature available since SH-C0, exclude older revisions */
+	if (((model == 4) && (stepping == 0)) ||
+	    ((model == 5) && (stepping <= 1))) {
+		err = -ENODEV;
+		goto exit_free;
+	}
 
-		break;
+	/*
+	 * AMD NPT family 0fh, i.e. RevF and RevG:
+	 * meaning of SEL_CORE bit is inverted
+	 */
+	if (model >= 0x40) {
+		data->swap_core_select = 1;
+		dev_warn(&pdev->dev, "Temperature readouts might be wrong - "
+			 "check erratum #141\n");
 	}
 
+	/*
+	 * RevG desktop CPUs (i.e. no socket S1G1 or ASB1 parts) need
+	 * additional offset, otherwise reported temperature is below
+	 * ambient temperature
+	 */
+	if (is_rev_g_desktop(model))
+		data->temp_offset = 21000;
+
 	pci_read_config_byte(pdev, REG_TEMP, &scfg);
 	scfg &= ~(SEL_PLACE | SEL_CORE);		/* Select sensor 0, core0 */
 	pci_write_config_byte(pdev, REG_TEMP, scfg);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index ab5b87a..f36eb80 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -1,22 +1,22 @@
 /*
-    lm75.c - Part of lm_sensors, Linux kernel modules for hardware
-             monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * lm75.c - Part of lm_sensors, Linux kernel modules for hardware
+ *	 monitoring
+ * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -103,7 +103,12 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm75_data *data = i2c_get_clientdata(client);
 	int nr = attr->index;
-	long temp = simple_strtol(buf, NULL, 10);
+	long temp;
+	int error;
+
+	error = strict_strtol(buf, 10, &temp);
+	if (error)
+		return error;
 
 	mutex_lock(&data->update_lock);
 	data->temp[nr] = LM75_TEMP_TO_REG(temp);
@@ -335,9 +340,11 @@ static struct i2c_driver lm75_driver = {
 
 /* register access */
 
-/* All registers are word-sized, except for the configuration register.
-   LM75 uses a high-byte first convention, which is exactly opposite to
-   the SMBus standard. */
+/*
+ * All registers are word-sized, except for the configuration register.
+ * LM75 uses a high-byte first convention, which is exactly opposite to
+ * the SMBus standard.
+ */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
 	int value;
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index b3841a6..1e22984 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -64,9 +64,12 @@ enum chips {
 #define	LM85_REG_VERSTEP		0x3f
 
 #define	ADT7468_REG_CFG5		0x7c
-#define		ADT7468_OFF64		0x01
+#define		ADT7468_OFF64		(1 << 0)
+#define		ADT7468_HFPWM		(1 << 1)
 #define	IS_ADT7468_OFF64(data)		\
 	((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
+#define	IS_ADT7468_HFPWM(data)		\
+	((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
 
 /* These are the recognized values for the above regs */
 #define	LM85_COMPANY_NATIONAL		0x01
@@ -567,8 +570,14 @@ static ssize_t show_pwm_freq(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf, "%d\n", FREQ_FROM_REG(data->freq_map,
-						  data->pwm_freq[nr]));
+	int freq;
+
+	if (IS_ADT7468_HFPWM(data))
+		freq = 22500;
+	else
+		freq = FREQ_FROM_REG(data->freq_map, data->pwm_freq[nr]);
+
+	return sprintf(buf, "%d\n", freq);
 }
 
 static ssize_t set_pwm_freq(struct device *dev,
@@ -580,10 +589,22 @@ static ssize_t set_pwm_freq(struct device *dev,
 	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
-	data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map, val);
-	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
-		(data->zone[nr].range << 4)
-		| data->pwm_freq[nr]);
+	/* The ADT7468 has a special high-frequency PWM output mode,
+	 * where all PWM outputs are driven by a 22.5 kHz clock.
+	 * This might confuse the user, but there's not much we can do. */
+	if (data->type == adt7468 && val >= 11300) {	/* High freq. mode */
+		data->cfg5 &= ~ADT7468_HFPWM;
+		lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
+	} else {					/* Low freq. mode */
+		data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map, val);
+		lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+				 (data->zone[nr].range << 4)
+				 | data->pwm_freq[nr]);
+		if (data->type == adt7468) {
+			data->cfg5 |= ADT7468_HFPWM;
+			lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
+		}
+	}
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1259,6 +1280,7 @@ static int lm85_probe(struct i2c_client *client,
 	switch (data->type) {
 	case adm1027:
 	case adt7463:
+	case adt7468:
 	case emc6d100:
 	case emc6d102:
 		data->freq_map = adm1027_freq_map;
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 760ef72..812781c 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -28,9 +28,11 @@
  * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
  * chips made by Maxim. These chips are similar to the LM86.
  * Note that there is no easy way to differentiate between the three
- * variants. The extra address and features of the MAX6659 are not
- * supported by this driver. These chips lack the remote temperature
- * offset feature.
+ * variants. We use the device address to detect MAX6659, which will result
+ * in a detection as max6657 if it is on address 0x4c. The extra address
+ * and features of the MAX6659 are only supported if the chip is configured
+ * explicitly as max6659, or if its address is not 0x4c.
+ * These chips lack the remote temperature offset feature.
  *
  * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
  * MAX6692 chips made by Maxim.  These are again similar to the LM86,
@@ -42,6 +44,11 @@
  * chips. The MAX6680 and MAX6681 only differ in the pinout so they can
  * be treated identically.
  *
+ * This driver also supports the MAX6695 and MAX6696, two other sensor
+ * chips made by Maxim. These are also quite similar to other Maxim
+ * chips, but support three temperature sensors instead of two. MAX6695
+ * and MAX6696 only differ in the pinout so they can be treated identically.
+ *
  * This driver also supports the ADT7461 chip from Analog Devices.
  * It's supported in both compatibility and extended mode. It is mostly
  * compatible with LM90 except for a data format difference for the
@@ -81,11 +88,11 @@
  * Addresses to scan
  * Address is fully defined internally and cannot be changed except for
  * MAX6659, MAX6680 and MAX6681.
- * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657
- * and MAX6658 have address 0x4c.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657,
+ * MAX6658 and W83L771 have address 0x4c.
  * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d.
  * MAX6647 has address 0x4e.
- * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
+ * MAX6659 can have address 0x4c, 0x4d or 0x4e.
  * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
  * 0x4c, 0x4d or 0x4e.
  */
@@ -93,8 +100,8 @@
 static const unsigned short normal_i2c[] = {
 	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
-enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
-	w83l771 };
+enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
+	max6646, w83l771, max6696 };
 
 /*
  * The LM90 registers
@@ -135,26 +142,30 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
 #define LM90_REG_R_TCRIT_HYST		0x21
 #define LM90_REG_W_TCRIT_HYST		0x21
 
-/* MAX6646/6647/6649/6657/6658/6659 registers */
+/* MAX6646/6647/6649/6657/6658/6659/6695/6696 registers */
 
 #define MAX6657_REG_R_LOCAL_TEMPL	0x11
+#define MAX6696_REG_R_STATUS2		0x12
+#define MAX6659_REG_R_REMOTE_EMERG	0x16
+#define MAX6659_REG_W_REMOTE_EMERG	0x16
+#define MAX6659_REG_R_LOCAL_EMERG	0x17
+#define MAX6659_REG_W_LOCAL_EMERG	0x17
 
-/*
- * Device flags
- */
-#define LM90_FLAG_ADT7461_EXT		0x01	/* ADT7461 extended mode */
+#define LM90_DEF_CONVRATE_RVAL	6	/* Def conversion rate register value */
+#define LM90_MAX_CONVRATE_MS	16000	/* Maximum conversion rate in ms */
 
 /*
- * Functions declaration
+ * Device flags
  */
-
-static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info);
-static int lm90_probe(struct i2c_client *client,
-		      const struct i2c_device_id *id);
-static void lm90_init_client(struct i2c_client *client);
-static void lm90_alert(struct i2c_client *client, unsigned int flag);
-static int lm90_remove(struct i2c_client *client);
-static struct lm90_data *lm90_update_device(struct device *dev);
+#define LM90_FLAG_ADT7461_EXT	(1 << 0) /* ADT7461 extended mode	*/
+/* Device features */
+#define LM90_HAVE_OFFSET	(1 << 1) /* temperature offset register	*/
+#define LM90_HAVE_LOCAL_EXT	(1 << 2) /* extended local temperature	*/
+#define LM90_HAVE_REM_LIMIT_EXT	(1 << 3) /* extended remote limit	*/
+#define LM90_HAVE_EMERGENCY	(1 << 4) /* 3rd upper (emergency) limit	*/
+#define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm		*/
+#define LM90_HAVE_TEMP3		(1 << 6) /* 3rd temperature sensor	*/
+#define LM90_HAVE_BROKEN_ALERT	(1 << 7) /* Broken alert		*/
 
 /*
  * Driver data (common to all clients)
@@ -172,25 +183,85 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6649", max6646 },
 	{ "max6657", max6657 },
 	{ "max6658", max6657 },
-	{ "max6659", max6657 },
+	{ "max6659", max6659 },
 	{ "max6680", max6680 },
 	{ "max6681", max6680 },
+	{ "max6695", max6696 },
+	{ "max6696", max6696 },
 	{ "w83l771", w83l771 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
 
-static struct i2c_driver lm90_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "lm90",
+/*
+ * chip type specific parameters
+ */
+struct lm90_params {
+	u32 flags;		/* Capabilities */
+	u16 alert_alarms;	/* Which alarm bits trigger ALERT# */
+				/* Upper 8 bits for max6695/96 */
+	u8 max_convrate;	/* Maximum conversion rate register value */
+};
+
+static const struct lm90_params lm90_params[] = {
+	[adm1032] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+		  | LM90_HAVE_BROKEN_ALERT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 10,
+	},
+	[adt7461] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+		  | LM90_HAVE_BROKEN_ALERT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 10,
+	},
+	[lm86] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+		.alert_alarms = 0x7b,
+		.max_convrate = 9,
+	},
+	[lm90] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+		.alert_alarms = 0x7b,
+		.max_convrate = 9,
+	},
+	[lm99] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+		.alert_alarms = 0x7b,
+		.max_convrate = 9,
+	},
+	[max6646] = {
+		.flags = LM90_HAVE_LOCAL_EXT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 6,
+	},
+	[max6657] = {
+		.flags = LM90_HAVE_LOCAL_EXT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 8,
+	},
+	[max6659] = {
+		.flags = LM90_HAVE_LOCAL_EXT | LM90_HAVE_EMERGENCY,
+		.alert_alarms = 0x7c,
+		.max_convrate = 8,
+	},
+	[max6680] = {
+		.flags = LM90_HAVE_OFFSET,
+		.alert_alarms = 0x7c,
+		.max_convrate = 7,
+	},
+	[max6696] = {
+		.flags = LM90_HAVE_LOCAL_EXT | LM90_HAVE_EMERGENCY
+		  | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3,
+		.alert_alarms = 0x187c,
+		.max_convrate = 6,
+	},
+	[w83l771] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 8,
 	},
-	.probe		= lm90_probe,
-	.remove		= lm90_remove,
-	.alert		= lm90_alert,
-	.id_table	= lm90_id,
-	.detect		= lm90_detect,
-	.address_list	= normal_i2c,
 };
 
 /*
@@ -203,26 +274,268 @@ struct lm90_data {
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 	int kind;
-	int flags;
+	u32 flags;
+
+	int update_interval;	/* in milliseconds */
 
 	u8 config_orig;		/* Original configuration register value */
-	u8 alert_alarms;	/* Which alarm bits trigger ALERT# */
+	u8 convrate_orig;	/* Original conversion rate register value */
+	u16 alert_alarms;	/* Which alarm bits trigger ALERT# */
+				/* Upper 8 bits for max6695/96 */
+	u8 max_convrate;	/* Maximum conversion rate */
 
 	/* registers values */
-	s8 temp8[4];	/* 0: local low limit
+	s8 temp8[8];	/* 0: local low limit
 			   1: local high limit
 			   2: local critical limit
-			   3: remote critical limit */
-	s16 temp11[5];	/* 0: remote input
+			   3: remote critical limit
+			   4: local emergency limit (max6659 and max6695/96)
+			   5: remote emergency limit (max6659 and max6695/96)
+			   6: remote 2 critical limit (max6695/96 only)
+			   7: remote 2 emergency limit (max6695/96 only) */
+	s16 temp11[8];	/* 0: remote input
 			   1: remote low limit
 			   2: remote high limit
-			   3: remote offset (except max6646 and max6657)
-			   4: local input */
+			   3: remote offset (except max6646, max6657/58/59,
+					     and max6695/96)
+			   4: local input
+			   5: remote 2 input (max6695/96 only)
+			   6: remote 2 low limit (max6695/96 only)
+			   7: remote 2 high limit (ma6695/96 only) */
 	u8 temp_hyst;
-	u8 alarms; /* bitvector */
+	u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
 };
 
 /*
+ * Support functions
+ */
+
+/*
+ * The ADM1032 supports PEC but not on write byte transactions, so we need
+ * to explicitly ask for a transaction without PEC.
+ */
+static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
+{
+	return i2c_smbus_xfer(client->adapter, client->addr,
+			      client->flags & ~I2C_CLIENT_PEC,
+			      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+
+/*
+ * It is assumed that client->update_lock is held (unless we are in
+ * detection or initialization steps). This matters when PEC is enabled,
+ * because we don't want the address pointer to change between the write
+ * byte and the read byte transactions.
+ */
+static int lm90_read_reg(struct i2c_client *client, u8 reg, u8 *value)
+{
+	int err;
+
+	if (client->flags & I2C_CLIENT_PEC) {
+		err = adm1032_write_byte(client, reg);
+		if (err >= 0)
+			err = i2c_smbus_read_byte(client);
+	} else
+		err = i2c_smbus_read_byte_data(client, reg);
+
+	if (err < 0) {
+		dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
+			 reg, err);
+		return err;
+	}
+	*value = err;
+
+	return 0;
+}
+
+static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
+{
+	int err;
+	u8 oldh, newh, l;
+
+	/*
+	 * There is a trick here. We have to read two registers to have the
+	 * sensor temperature, but we have to beware a conversion could occur
+	 * inbetween the readings. The datasheet says we should either use
+	 * the one-shot conversion register, which we don't want to do
+	 * (disables hardware monitoring) or monitor the busy bit, which is
+	 * impossible (we can't read the values and monitor that bit at the
+	 * exact same time). So the solution used here is to read the high
+	 * byte once, then the low byte, then the high byte again. If the new
+	 * high byte matches the old one, then we have a valid reading. Else
+	 * we have to read the low byte again, and now we believe we have a
+	 * correct reading.
+	 */
+	if ((err = lm90_read_reg(client, regh, &oldh))
+	 || (err = lm90_read_reg(client, regl, &l))
+	 || (err = lm90_read_reg(client, regh, &newh)))
+		return err;
+	if (oldh != newh) {
+		err = lm90_read_reg(client, regl, &l);
+		if (err)
+			return err;
+	}
+	*value = (newh << 8) | l;
+
+	return 0;
+}
+
+/*
+ * client->update_lock must be held when calling this function (unless we are
+ * in detection or initialization steps), and while a remote channel other
+ * than channel 0 is selected. Also, calling code must make sure to re-select
+ * external channel 0 before releasing the lock. This is necessary because
+ * various registers have different meanings as a result of selecting a
+ * non-default remote channel.
+ */
+static inline void lm90_select_remote_channel(struct i2c_client *client,
+					      struct lm90_data *data,
+					      int channel)
+{
+	u8 config;
+
+	if (data->kind == max6696) {
+		lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+		config &= ~0x08;
+		if (channel)
+			config |= 0x08;
+		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+					  config);
+	}
+}
+
+/*
+ * Set conversion rate.
+ * client->update_lock must be held when calling this function (unless we are
+ * in detection or initialization steps).
+ */
+static void lm90_set_convrate(struct i2c_client *client, struct lm90_data *data,
+			      unsigned int interval)
+{
+	int i;
+	unsigned int update_interval;
+
+	/* Shift calculations to avoid rounding errors */
+	interval <<= 6;
+
+	/* find the nearest update rate */
+	for (i = 0, update_interval = LM90_MAX_CONVRATE_MS << 6;
+	     i < data->max_convrate; i++, update_interval >>= 1)
+		if (interval >= update_interval * 3 / 4)
+			break;
+
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, i);
+	data->update_interval = DIV_ROUND_CLOSEST(update_interval, 64);
+}
+
+static struct lm90_data *lm90_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	unsigned long next_update;
+
+	mutex_lock(&data->update_lock);
+
+	next_update = data->last_updated
+	  + msecs_to_jiffies(data->update_interval) + 1;
+	if (time_after(jiffies, next_update) || !data->valid) {
+		u8 h, l;
+		u8 alarms;
+
+		dev_dbg(&client->dev, "Updating lm90 data.\n");
+		lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
+		lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
+		lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
+		lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
+		lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
+
+		if (data->flags & LM90_HAVE_LOCAL_EXT) {
+			lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
+				    MAX6657_REG_R_LOCAL_TEMPL,
+				    &data->temp11[4]);
+		} else {
+			if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
+					  &h) == 0)
+				data->temp11[4] = h << 8;
+		}
+		lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+			    LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
+
+		if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
+			data->temp11[1] = h << 8;
+			if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
+			 && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
+					  &l) == 0)
+				data->temp11[1] |= l;
+		}
+		if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
+			data->temp11[2] = h << 8;
+			if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
+			 && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
+					  &l) == 0)
+				data->temp11[2] |= l;
+		}
+
+		if (data->flags & LM90_HAVE_OFFSET) {
+			if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH,
+					  &h) == 0
+			 && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
+					  &l) == 0)
+				data->temp11[3] = (h << 8) | l;
+		}
+		if (data->flags & LM90_HAVE_EMERGENCY) {
+			lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG,
+				      &data->temp8[4]);
+			lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
+				      &data->temp8[5]);
+		}
+		lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
+		data->alarms = alarms;	/* save as 16 bit value */
+
+		if (data->kind == max6696) {
+			lm90_select_remote_channel(client, data, 1);
+			lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
+				      &data->temp8[6]);
+			lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
+				      &data->temp8[7]);
+			lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+				    LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]);
+			if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
+				data->temp11[6] = h << 8;
+			if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
+				data->temp11[7] = h << 8;
+			lm90_select_remote_channel(client, data, 0);
+
+			if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
+					   &alarms))
+				data->alarms |= alarms << 8;
+		}
+
+		/* Re-enable ALERT# output if it was originally enabled and
+		 * relevant alarms are all clear */
+		if ((data->config_orig & 0x80) == 0
+		 && (data->alarms & data->alert_alarms) == 0) {
+			u8 config;
+
+			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+			if (config & 0x80) {
+				dev_dbg(&client->dev, "Re-enabling ALERT#\n");
+				i2c_smbus_write_byte_data(client,
+							  LM90_REG_W_CONFIG1,
+							  config & ~0x80);
+			}
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
  * Conversions
  * For local temperatures and limits, critical limits and the hysteresis
  * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
@@ -377,18 +690,27 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 			 const char *buf, size_t count)
 {
-	static const u8 reg[4] = {
+	static const u8 reg[8] = {
 		LM90_REG_W_LOCAL_LOW,
 		LM90_REG_W_LOCAL_HIGH,
 		LM90_REG_W_LOCAL_CRIT,
 		LM90_REG_W_REMOTE_CRIT,
+		MAX6659_REG_W_LOCAL_EMERG,
+		MAX6659_REG_W_REMOTE_EMERG,
+		LM90_REG_W_REMOTE_CRIT,
+		MAX6659_REG_W_REMOTE_EMERG,
 	};
 
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
 
 	/* +16 degrees offset for temp2 for the LM99 */
 	if (data->kind == lm99 && attr->index == 3)
@@ -401,7 +723,11 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 		data->temp8[nr] = temp_to_u8(val);
 	else
 		data->temp8[nr] = temp_to_s8(val);
+
+	lm90_select_remote_channel(client, data, nr >= 6);
 	i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
+	lm90_select_remote_channel(client, data, 0);
+
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -409,7 +735,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
 			   char *buf)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
 	struct lm90_data *data = lm90_update_device(dev);
 	int temp;
 
@@ -430,46 +756,58 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
 			  const char *buf, size_t count)
 {
-	static const u8 reg[6] = {
-		LM90_REG_W_REMOTE_LOWH,
-		LM90_REG_W_REMOTE_LOWL,
-		LM90_REG_W_REMOTE_HIGHH,
-		LM90_REG_W_REMOTE_HIGHL,
-		LM90_REG_W_REMOTE_OFFSH,
-		LM90_REG_W_REMOTE_OFFSL,
+	struct {
+		u8 high;
+		u8 low;
+		int channel;
+	} reg[5] = {
+		{ LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 },
+		{ LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 },
+		{ LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 },
+		{ LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 1 },
+		{ LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
 	};
 
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
-	int nr = attr->index;
+	int nr = attr->nr;
+	int index = attr->index;
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
 
 	/* +16 degrees offset for temp2 for the LM99 */
-	if (data->kind == lm99 && attr->index <= 2)
+	if (data->kind == lm99 && index <= 2)
 		val -= 16000;
 
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
-		data->temp11[nr] = temp_to_u16_adt7461(data, val);
-	else if (data->kind == max6657 || data->kind == max6680)
-		data->temp11[nr] = temp_to_s8(val) << 8;
+		data->temp11[index] = temp_to_u16_adt7461(data, val);
 	else if (data->kind == max6646)
-		data->temp11[nr] = temp_to_u8(val) << 8;
+		data->temp11[index] = temp_to_u8(val) << 8;
+	else if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
+		data->temp11[index] = temp_to_s16(val);
 	else
-		data->temp11[nr] = temp_to_s16(val);
-
-	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
-				  data->temp11[nr] >> 8);
-	if (data->kind != max6657 && data->kind != max6680
-	    && data->kind != max6646)
-		i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
-					  data->temp11[nr] & 0xff);
+		data->temp11[index] = temp_to_s8(val) << 8;
+
+	lm90_select_remote_channel(client, data, reg[nr].channel);
+	i2c_smbus_write_byte_data(client, reg[nr].high,
+				  data->temp11[index] >> 8);
+	if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
+		i2c_smbus_write_byte_data(client, reg[nr].low,
+					  data->temp11[index] & 0xff);
+	lm90_select_remote_channel(client, data, 0);
+
 	mutex_unlock(&data->update_lock);
 	return count;
 }
 
-static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
+static ssize_t show_temphyst(struct device *dev,
+			     struct device_attribute *devattr,
 			     char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
@@ -495,9 +833,14 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
+	long val;
+	int err;
 	int temp;
 
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
+
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		temp = temp_from_u8_adt7461(data, data->temp8[2]);
@@ -530,16 +873,44 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute
 	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
 }
 
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
+static ssize_t show_update_interval(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct lm90_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", data->update_interval);
+}
+
+static ssize_t set_update_interval(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int err;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	lm90_set_convrate(client, data, val);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL, 0, 4);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL, 0, 0);
 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
 	set_temp8, 0);
-static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
-	set_temp11, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 0, 1);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
 	set_temp8, 1);
-static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
-	set_temp11, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 1, 2);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
 	set_temp8, 2);
 static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
@@ -547,8 +918,8 @@ static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
 	set_temphyst, 2);
 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
-	set_temp11, 3);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 2, 3);
 
 /* Individual alarm files */
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
@@ -561,6 +932,9 @@ static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
 /* Raw alarm file for compatibility */
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+		   set_update_interval);
+
 static struct attribute *lm90_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
@@ -581,6 +955,7 @@ static struct attribute *lm90_attributes[] = {
 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 	&dev_attr_alarms.attr,
+	&dev_attr_update_interval.attr,
 	NULL
 };
 
@@ -588,6 +963,86 @@ static const struct attribute_group lm90_group = {
 	.attrs = lm90_attributes,
 };
 
+/*
+ * Additional attributes for devices with emergency sensors
+ */
+static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 4);
+static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 5);
+static SENSOR_DEVICE_ATTR(temp1_emergency_hyst, S_IRUGO, show_temphyst,
+			  NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_emergency_hyst, S_IRUGO, show_temphyst,
+			  NULL, 5);
+
+static struct attribute *lm90_emergency_attributes[] = {
+	&sensor_dev_attr_temp1_emergency.dev_attr.attr,
+	&sensor_dev_attr_temp2_emergency.dev_attr.attr,
+	&sensor_dev_attr_temp1_emergency_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_emergency_hyst.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm90_emergency_group = {
+	.attrs = lm90_emergency_attributes,
+};
+
+static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 13);
+
+static struct attribute *lm90_emergency_alarm_attributes[] = {
+	&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm90_emergency_alarm_group = {
+	.attrs = lm90_emergency_alarm_attributes,
+};
+
+/*
+ * Additional attributes for devices with 3 temperature sensors
+ */
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 3, 6);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 4, 7);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 6);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 7);
+static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst,
+			  NULL, 7);
+
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp3_emergency_alarm, S_IRUGO, show_alarm, NULL, 14);
+
+static struct attribute *lm90_temp3_attributes[] = {
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_emergency.dev_attr.attr,
+	&sensor_dev_attr_temp3_emergency_hyst.dev_attr.attr,
+
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_emergency_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm90_temp3_group = {
+	.attrs = lm90_temp3_attributes,
+};
+
 /* pec used for ADM1032 only */
 static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
 			char *buf)
@@ -600,7 +1055,12 @@ static ssize_t set_pec(struct device *dev, struct device_attribute *dummy,
 		       const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	long val = simple_strtol(buf, NULL, 10);
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
 
 	switch (val) {
 	case 0:
@@ -622,40 +1082,6 @@ static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
  * Real code
  */
 
-/* The ADM1032 supports PEC but not on write byte transactions, so we need
-   to explicitly ask for a transaction without PEC. */
-static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
-{
-	return i2c_smbus_xfer(client->adapter, client->addr,
-			      client->flags & ~I2C_CLIENT_PEC,
-			      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
-}
-
-/* It is assumed that client->update_lock is held (unless we are in
-   detection or initialization steps). This matters when PEC is enabled,
-   because we don't want the address pointer to change between the write
-   byte and the read byte transactions. */
-static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
-{
-	int err;
-
- 	if (client->flags & I2C_CLIENT_PEC) {
- 		err = adm1032_write_byte(client, reg);
- 		if (err >= 0)
- 			err = i2c_smbus_read_byte(client);
- 	} else
- 		err = i2c_smbus_read_byte_data(client, reg);
-
-	if (err < 0) {
-		dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
-			 reg, err);
-		return err;
-	}
-	*value = err;
-
-	return 0;
-}
-
 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int lm90_detect(struct i2c_client *new_client,
 		       struct i2c_board_info *info)
@@ -730,6 +1156,23 @@ static int lm90_detect(struct i2c_client *new_client,
 		}
 	} else
 	if (man_id == 0x4D) { /* Maxim */
+		int reg_emerg, reg_emerg2, reg_status2;
+
+		/*
+		 * We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read
+		 * LM90_REG_R_MAN_ID in between. If MAX6659_REG_R_REMOTE_EMERG
+		 * exists, both readings will reflect the same value. Otherwise,
+		 * the readings will be different.
+		 */
+		if ((reg_emerg = i2c_smbus_read_byte_data(new_client,
+						MAX6659_REG_R_REMOTE_EMERG)) < 0
+		 || i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID) < 0
+		 || (reg_emerg2 = i2c_smbus_read_byte_data(new_client,
+						MAX6659_REG_R_REMOTE_EMERG)) < 0
+		 || (reg_status2 = i2c_smbus_read_byte_data(new_client,
+						MAX6696_REG_R_STATUS2)) < 0)
+			return -ENODEV;
+
 		/*
 		 * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
 		 * register. Reading from that address will return the last
@@ -737,12 +1180,38 @@ static int lm90_detect(struct i2c_client *new_client,
 		 * register. Likewise, the config1 register seems to lack a
 		 * low nibble, so the value will be those of the previous
 		 * read, so in our case those of the man_id register.
+		 * MAX6659 has a third set of upper temperature limit registers.
+		 * Those registers also return values on MAX6657 and MAX6658,
+		 * thus the only way to detect MAX6659 is by its address.
+		 * For this reason it will be mis-detected as MAX6657 if its
+		 * address is 0x4C.
 		 */
 		if (chip_id == man_id
-		 && (address == 0x4C || address == 0x4D)
+		 && (address == 0x4C || address == 0x4D || address == 0x4E)
 		 && (reg_config1 & 0x1F) == (man_id & 0x0F)
 		 && reg_convrate <= 0x09) {
-			name = "max6657";
+			if (address == 0x4C)
+				name = "max6657";
+			else
+				name = "max6659";
+		} else
+		/*
+		 * Even though MAX6695 and MAX6696 do not have a chip ID
+		 * register, reading it returns 0x01. Bit 4 of the config1
+		 * register is unused and should return zero when read. Bit 0 of
+		 * the status2 register is unused and should return zero when
+		 * read.
+		 *
+		 * MAX6695 and MAX6696 have an additional set of temperature
+		 * limit registers. We can detect those chips by checking if
+		 * one of those registers exists.
+		 */
+		if (chip_id == 0x01
+		 && (reg_config1 & 0x10) == 0x00
+		 && (reg_status2 & 0x01) == 0x00
+		 && reg_emerg == reg_emerg2
+		 && reg_convrate <= 0x07) {
+			name = "max6696";
 		} else
 		/*
 		 * The chip_id register of the MAX6680 and MAX6681 holds the
@@ -768,10 +1237,23 @@ static int lm90_detect(struct i2c_client *new_client,
 	} else
 	if (address == 0x4C
 	 && man_id == 0x5C) { /* Winbond/Nuvoton */
-		if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
-		 && (reg_config1 & 0x2A) == 0x00
-		 && reg_convrate <= 0x08) {
-			name = "w83l771";
+		int reg_config2;
+
+		reg_config2 = i2c_smbus_read_byte_data(new_client,
+						LM90_REG_R_CONFIG2);
+		if (reg_config2 < 0)
+			return -ENODEV;
+
+		if ((reg_config1 & 0x2A) == 0x00
+		 && (reg_config2 & 0xF8) == 0x00) {
+			if (chip_id == 0x01 /* W83L771W/G */
+			 && reg_convrate <= 0x09) {
+				name = "w83l771";
+			} else
+			if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
+			 && reg_convrate <= 0x08) {
+				name = "w83l771";
+			}
 		}
 	}
 
@@ -787,6 +1269,69 @@ static int lm90_detect(struct i2c_client *new_client,
 	return 0;
 }
 
+static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data)
+{
+	if (data->flags & LM90_HAVE_TEMP3)
+		sysfs_remove_group(&client->dev.kobj, &lm90_temp3_group);
+	if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
+		sysfs_remove_group(&client->dev.kobj,
+				   &lm90_emergency_alarm_group);
+	if (data->flags & LM90_HAVE_EMERGENCY)
+		sysfs_remove_group(&client->dev.kobj,
+				   &lm90_emergency_group);
+	if (data->flags & LM90_HAVE_OFFSET)
+		device_remove_file(&client->dev,
+				   &sensor_dev_attr_temp2_offset.dev_attr);
+	device_remove_file(&client->dev, &dev_attr_pec);
+	sysfs_remove_group(&client->dev.kobj, &lm90_group);
+}
+
+static void lm90_init_client(struct i2c_client *client)
+{
+	u8 config, convrate;
+	struct lm90_data *data = i2c_get_clientdata(client);
+
+	if (lm90_read_reg(client, LM90_REG_R_CONVRATE, &convrate) < 0) {
+		dev_warn(&client->dev, "Failed to read convrate register!\n");
+		convrate = LM90_DEF_CONVRATE_RVAL;
+	}
+	data->convrate_orig = convrate;
+
+	/*
+	 * Start the conversions.
+	 */
+	lm90_set_convrate(client, data, 500);	/* 500ms; 2Hz conversion rate */
+	if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) {
+		dev_warn(&client->dev, "Initialization failed!\n");
+		return;
+	}
+	data->config_orig = config;
+
+	/* Check Temperature Range Select */
+	if (data->kind == adt7461) {
+		if (config & 0x04)
+			data->flags |= LM90_FLAG_ADT7461_EXT;
+	}
+
+	/*
+	 * Put MAX6680/MAX8881 into extended resolution (bit 0x10,
+	 * 0.125 degree resolution) and range (0x08, extend range
+	 * to -64 degree) mode for the remote temperature sensor.
+	 */
+	if (data->kind == max6680)
+		config |= 0x18;
+
+	/*
+	 * Select external channel 0 for max6695/96
+	 */
+	if (data->kind == max6696)
+		config &= ~0x08;
+
+	config &= 0xBF;	/* run */
+	if (config != data->config_orig) /* Only write if changed */
+		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
+}
+
 static int lm90_probe(struct i2c_client *new_client,
 		      const struct i2c_device_id *id)
 {
@@ -811,31 +1356,48 @@ static int lm90_probe(struct i2c_client *new_client,
 
 	/* Different devices have different alarm bits triggering the
 	 * ALERT# output */
-	switch (data->kind) {
-	case lm90:
-	case lm99:
-	case lm86:
-		data->alert_alarms = 0x7b;
-		break;
-	default:
-		data->alert_alarms = 0x7c;
-		break;
-	}
+	data->alert_alarms = lm90_params[data->kind].alert_alarms;
+
+	/* Set chip capabilities */
+	data->flags = lm90_params[data->kind].flags;
+
+	/* Set maximum conversion rate */
+	data->max_convrate = lm90_params[data->kind].max_convrate;
 
 	/* Initialize the LM90 chip */
 	lm90_init_client(new_client);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group)))
+	err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
+	if (err)
 		goto exit_free;
 	if (new_client->flags & I2C_CLIENT_PEC) {
-		if ((err = device_create_file(&new_client->dev,
-					      &dev_attr_pec)))
+		err = device_create_file(&new_client->dev, &dev_attr_pec);
+		if (err)
+			goto exit_remove_files;
+	}
+	if (data->flags & LM90_HAVE_OFFSET) {
+		err = device_create_file(&new_client->dev,
+					&sensor_dev_attr_temp2_offset.dev_attr);
+		if (err)
 			goto exit_remove_files;
 	}
-	if (data->kind != max6657 && data->kind != max6646) {
-		if ((err = device_create_file(&new_client->dev,
-				&sensor_dev_attr_temp2_offset.dev_attr)))
+	if (data->flags & LM90_HAVE_EMERGENCY) {
+		err = sysfs_create_group(&new_client->dev.kobj,
+					 &lm90_emergency_group);
+		if (err)
+			goto exit_remove_files;
+	}
+	if (data->flags & LM90_HAVE_EMERGENCY_ALARM) {
+		err = sysfs_create_group(&new_client->dev.kobj,
+					 &lm90_emergency_alarm_group);
+		if (err)
+			goto exit_remove_files;
+	}
+	if (data->flags & LM90_HAVE_TEMP3) {
+		err = sysfs_create_group(&new_client->dev.kobj,
+					 &lm90_temp3_group);
+		if (err)
 			goto exit_remove_files;
 	}
 
@@ -848,62 +1410,23 @@ static int lm90_probe(struct i2c_client *new_client,
 	return 0;
 
 exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &lm90_group);
-	device_remove_file(&new_client->dev, &dev_attr_pec);
+	lm90_remove_files(new_client, data);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static void lm90_init_client(struct i2c_client *client)
-{
-	u8 config;
-	struct lm90_data *data = i2c_get_clientdata(client);
-
-	/*
-	 * Start the conversions.
-	 */
-	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
-				  5); /* 2 Hz */
-	if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) {
-		dev_warn(&client->dev, "Initialization failed!\n");
-		return;
-	}
-	data->config_orig = config;
-
-	/* Check Temperature Range Select */
-	if (data->kind == adt7461) {
-		if (config & 0x04)
-			data->flags |= LM90_FLAG_ADT7461_EXT;
-	}
-
-	/*
-	 * Put MAX6680/MAX8881 into extended resolution (bit 0x10,
-	 * 0.125 degree resolution) and range (0x08, extend range
-	 * to -64 degree) mode for the remote temperature sensor.
-	 */
-	if (data->kind == max6680) {
-		config |= 0x18;
-	}
-
-	config &= 0xBF;	/* run */
-	if (config != data->config_orig) /* Only write if changed */
-		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
-}
-
 static int lm90_remove(struct i2c_client *client)
 {
 	struct lm90_data *data = i2c_get_clientdata(client);
 
 	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm90_group);
-	device_remove_file(&client->dev, &dev_attr_pec);
-	if (data->kind != max6657 && data->kind != max6646)
-		device_remove_file(&client->dev,
-				   &sensor_dev_attr_temp2_offset.dev_attr);
+	lm90_remove_files(client, data);
 
 	/* Restore initial configuration */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
+				  data->convrate_orig);
 	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
 				  data->config_orig);
 
@@ -914,10 +1437,14 @@ static int lm90_remove(struct i2c_client *client)
 static void lm90_alert(struct i2c_client *client, unsigned int flag)
 {
 	struct lm90_data *data = i2c_get_clientdata(client);
-	u8 config, alarms;
+	u8 config, alarms, alarms2 = 0;
 
 	lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
-	if ((alarms & 0x7f) == 0) {
+
+	if (data->kind == max6696)
+		lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2);
+
+	if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
 		dev_info(&client->dev, "Everything OK\n");
 	} else {
 		if (alarms & 0x61)
@@ -930,10 +1457,14 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag)
 			dev_warn(&client->dev,
 				 "temp%d diode open, please check!\n", 2);
 
+		if (alarms2 & 0x18)
+			dev_warn(&client->dev,
+				 "temp%d out of range, please check!\n", 3);
+
 		/* Disable ALERT# output, because these chips don't implement
 		  SMBus alert correctly; they should only hold the alert line
 		  low briefly. */
-		if ((data->kind == adm1032 || data->kind == adt7461)
+		if ((data->flags & LM90_HAVE_BROKEN_ALERT)
 		 && (alarms & data->alert_alarms)) {
 			dev_dbg(&client->dev, "Disabling ALERT#\n");
 			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
@@ -943,117 +1474,18 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag)
 	}
 }
 
-static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
-{
-	int err;
-	u8 oldh, newh, l;
-
-	/*
-	 * There is a trick here. We have to read two registers to have the
-	 * sensor temperature, but we have to beware a conversion could occur
-	 * inbetween the readings. The datasheet says we should either use
-	 * the one-shot conversion register, which we don't want to do
-	 * (disables hardware monitoring) or monitor the busy bit, which is
-	 * impossible (we can't read the values and monitor that bit at the
-	 * exact same time). So the solution used here is to read the high
-	 * byte once, then the low byte, then the high byte again. If the new
-	 * high byte matches the old one, then we have a valid reading. Else
-	 * we have to read the low byte again, and now we believe we have a
-	 * correct reading.
-	 */
-	if ((err = lm90_read_reg(client, regh, &oldh))
-	 || (err = lm90_read_reg(client, regl, &l))
-	 || (err = lm90_read_reg(client, regh, &newh)))
-		return err;
-	if (oldh != newh) {
-		err = lm90_read_reg(client, regl, &l);
-		if (err)
-			return err;
-	}
-	*value = (newh << 8) | l;
-
-	return 0;
-}
-
-static struct lm90_data *lm90_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm90_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10)
-	 || !data->valid) {
-		u8 h, l;
-
-		dev_dbg(&client->dev, "Updating lm90 data.\n");
-		lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
-		lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
-		lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
-		lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
-		lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
-
-		if (data->kind == max6657 || data->kind == max6646) {
-			lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
-				    MAX6657_REG_R_LOCAL_TEMPL,
-				    &data->temp11[4]);
-		} else {
-			if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
-					  &h) == 0)
-				data->temp11[4] = h << 8;
-		}
-		lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
-			    LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
-
-		if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
-			data->temp11[1] = h << 8;
-			if (data->kind != max6657 && data->kind != max6680
-			 && data->kind != max6646
-			 && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
-					  &l) == 0)
-				data->temp11[1] |= l;
-		}
-		if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
-			data->temp11[2] = h << 8;
-			if (data->kind != max6657 && data->kind != max6680
-			 && data->kind != max6646
-			 && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
-					  &l) == 0)
-				data->temp11[2] |= l;
-		}
-
-		if (data->kind != max6657 && data->kind != max6646) {
-			if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH,
-					  &h) == 0
-			 && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
-					  &l) == 0)
-				data->temp11[3] = (h << 8) | l;
-		}
-		lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
-
-		/* Re-enable ALERT# output if it was originally enabled and
-		 * relevant alarms are all clear */
-		if ((data->config_orig & 0x80) == 0
-		 && (data->alarms & data->alert_alarms) == 0) {
-			u8 config;
-
-			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
-			if (config & 0x80) {
-				dev_dbg(&client->dev, "Re-enabling ALERT#\n");
-				i2c_smbus_write_byte_data(client,
-							  LM90_REG_W_CONFIG1,
-							  config & ~0x80);
-			}
-		}
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	mutex_unlock(&data->update_lock);
-
-	return data;
-}
+static struct i2c_driver lm90_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm90",
+	},
+	.probe		= lm90_probe,
+	.remove		= lm90_remove,
+	.alert		= lm90_alert,
+	.id_table	= lm90_id,
+	.detect		= lm90_detect,
+	.address_list	= normal_i2c,
+};
 
 static int __init sensors_lm90_init(void)
 {
diff --git a/drivers/hwmon/pcf8591.c b/drivers/hwmon/pcf8591.c
index d4478794..dc7259d 100644
--- a/drivers/hwmon/pcf8591.c
+++ b/drivers/hwmon/pcf8591.c
@@ -23,10 +23,8 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
-					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+#include <linux/err.h>
+#include <linux/hwmon.h>
 
 /* Insmod parameters */
 
@@ -71,6 +69,7 @@ MODULE_PARM_DESC(input_mode,
 #define REG_TO_SIGNED(reg)	(((reg) & 0x80)?((reg) - 256):(reg))
 
 struct pcf8591_data {
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 
 	u8 control;
@@ -167,24 +166,6 @@ static const struct attribute_group pcf8591_attr_group_opt = {
  * Real code
  */
 
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8591_detect(struct i2c_client *client,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
-				     | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -ENODEV;
-
-	/* Now, we would do the remaining detection. But the PCF8591 is plainly
-	   impossible to detect! Stupid chip. */
-
-	strlcpy(info->type, "pcf8591", I2C_NAME_SIZE);
-
-	return 0;
-}
-
 static int pcf8591_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -221,6 +202,12 @@ static int pcf8591_probe(struct i2c_client *client,
 			goto exit_sysfs_remove;
 	}
 
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_sysfs_remove;
+	}
+
 	return 0;
 
 exit_sysfs_remove:
@@ -234,6 +221,9 @@ exit:
 
 static int pcf8591_remove(struct i2c_client *client)
 {
+	struct pcf8591_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
 	kfree(i2c_get_clientdata(client));
@@ -295,10 +285,6 @@ static struct i2c_driver pcf8591_driver = {
 	.probe		= pcf8591_probe,
 	.remove		= pcf8591_remove,
 	.id_table	= pcf8591_id,
-
-	.class		= I2C_CLASS_HWMON,	/* Nearest choice */
-	.detect		= pcf8591_detect,
-	.address_list	= normal_i2c,
 };
 
 static int __init pcf8591_init(void)
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 3f3f9a4..05248f2 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -51,7 +51,7 @@ struct s3c_hwmon_attr {
  * @attr: The holders for the channel attributes.
 */
 struct s3c_hwmon {
-	struct semaphore	lock;
+	struct mutex		lock;
 	struct s3c_adc_client	*client;
 	struct device		*hwmon_dev;
 
@@ -73,14 +73,14 @@ static int s3c_hwmon_read_ch(struct device *dev,
 {
 	int ret;
 
-	ret = down_interruptible(&hwmon->lock);
+	ret = mutex_lock_interruptible(&hwmon->lock);
 	if (ret < 0)
 		return ret;
 
 	dev_dbg(dev, "reading channel %d\n", channel);
 
 	ret = s3c_adc_read(hwmon->client, channel);
-	up(&hwmon->lock);
+	mutex_unlock(&hwmon->lock);
 
 	return ret;
 }
@@ -296,7 +296,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, hwmon);
 
-	init_MUTEX(&hwmon->lock);
+	mutex_init(&hwmon->lock);
 
 	/* Register with the core ADC driver. */
 
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 6b4165c..0517a8f 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -36,8 +36,8 @@
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
-				       I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
+					     I2C_CLIENT_END };
 
 enum chips { tmp421, tmp422, tmp423 };
 
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
new file mode 100644
index 0000000..1d840aa
--- /dev/null
+++ b/drivers/hwmon/w83795.c
@@ -0,0 +1,2121 @@
+/*
+ *  w83795.c - Linux kernel driver for hardware monitoring
+ *  Copyright (C) 2008 Nuvoton Technology Corp.
+ *                Wei Song
+ *  Copyright (C) 2010 Jean Delvare <khali@linux-fr.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation - version 2.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301 USA.
+ *
+ *  Supports following chips:
+ *
+ *  Chip       #vin   #fanin #pwm #temp #dts wchipid  vendid  i2c  ISA
+ *  w83795g     21     14     8     6     8    0x79   0x5ca3  yes   no
+ *  w83795adg   18     14     2     6     8    0x79   0x5ca3  yes   no
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+	0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
+};
+
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+
+#define W83795_REG_BANKSEL		0x00
+#define W83795_REG_VENDORID		0xfd
+#define W83795_REG_CHIPID		0xfe
+#define W83795_REG_DEVICEID		0xfb
+#define W83795_REG_DEVICEID_A		0xff
+
+#define W83795_REG_I2C_ADDR		0xfc
+#define W83795_REG_CONFIG		0x01
+#define W83795_REG_CONFIG_CONFIG48	0x04
+#define W83795_REG_CONFIG_START	0x01
+
+/* Multi-Function Pin Ctrl Registers */
+#define W83795_REG_VOLT_CTRL1		0x02
+#define W83795_REG_VOLT_CTRL2		0x03
+#define W83795_REG_TEMP_CTRL1		0x04
+#define W83795_REG_TEMP_CTRL2		0x05
+#define W83795_REG_FANIN_CTRL1		0x06
+#define W83795_REG_FANIN_CTRL2		0x07
+#define W83795_REG_VMIGB_CTRL		0x08
+
+#define TEMP_READ			0
+#define TEMP_CRIT			1
+#define TEMP_CRIT_HYST			2
+#define TEMP_WARN			3
+#define TEMP_WARN_HYST			4
+/* only crit and crit_hyst affect real-time alarm status
+ * current crit crit_hyst warn warn_hyst */
+static const u16 W83795_REG_TEMP[][5] = {
+	{0x21, 0x96, 0x97, 0x98, 0x99},	/* TD1/TR1 */
+	{0x22, 0x9a, 0x9b, 0x9c, 0x9d},	/* TD2/TR2 */
+	{0x23, 0x9e, 0x9f, 0xa0, 0xa1},	/* TD3/TR3 */
+	{0x24, 0xa2, 0xa3, 0xa4, 0xa5},	/* TD4/TR4 */
+	{0x1f, 0xa6, 0xa7, 0xa8, 0xa9},	/* TR5 */
+	{0x20, 0xaa, 0xab, 0xac, 0xad},	/* TR6 */
+};
+
+#define IN_READ				0
+#define IN_MAX				1
+#define IN_LOW				2
+static const u16 W83795_REG_IN[][3] = {
+	/* Current, HL, LL */
+	{0x10, 0x70, 0x71},	/* VSEN1 */
+	{0x11, 0x72, 0x73},	/* VSEN2 */
+	{0x12, 0x74, 0x75},	/* VSEN3 */
+	{0x13, 0x76, 0x77},	/* VSEN4 */
+	{0x14, 0x78, 0x79},	/* VSEN5 */
+	{0x15, 0x7a, 0x7b},	/* VSEN6 */
+	{0x16, 0x7c, 0x7d},	/* VSEN7 */
+	{0x17, 0x7e, 0x7f},	/* VSEN8 */
+	{0x18, 0x80, 0x81},	/* VSEN9 */
+	{0x19, 0x82, 0x83},	/* VSEN10 */
+	{0x1A, 0x84, 0x85},	/* VSEN11 */
+	{0x1B, 0x86, 0x87},	/* VTT */
+	{0x1C, 0x88, 0x89},	/* 3VDD */
+	{0x1D, 0x8a, 0x8b},	/* 3VSB */
+	{0x1E, 0x8c, 0x8d},	/* VBAT */
+	{0x1F, 0xa6, 0xa7},	/* VSEN12 */
+	{0x20, 0xaa, 0xab},	/* VSEN13 */
+	{0x21, 0x96, 0x97},	/* VSEN14 */
+	{0x22, 0x9a, 0x9b},	/* VSEN15 */
+	{0x23, 0x9e, 0x9f},	/* VSEN16 */
+	{0x24, 0xa2, 0xa3},	/* VSEN17 */
+};
+#define W83795_REG_VRLSB		0x3C
+
+static const u8 W83795_REG_IN_HL_LSB[] = {
+	0x8e,	/* VSEN1-4 */
+	0x90,	/* VSEN5-8 */
+	0x92,	/* VSEN9-11 */
+	0x94,	/* VTT, 3VDD, 3VSB, 3VBAT */
+	0xa8,	/* VSEN12 */
+	0xac,	/* VSEN13 */
+	0x98,	/* VSEN14 */
+	0x9c,	/* VSEN15 */
+	0xa0,	/* VSEN16 */
+	0xa4,	/* VSEN17 */
+};
+
+#define IN_LSB_REG(index, type) \
+	(((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \
+	: (W83795_REG_IN_HL_LSB[(index)] + 1))
+
+#define IN_LSB_SHIFT			0
+#define IN_LSB_IDX			1
+static const u8 IN_LSB_SHIFT_IDX[][2] = {
+	/* High/Low LSB shift, LSB No. */
+	{0x00, 0x00},	/* VSEN1 */
+	{0x02, 0x00},	/* VSEN2 */
+	{0x04, 0x00},	/* VSEN3 */
+	{0x06, 0x00},	/* VSEN4 */
+	{0x00, 0x01},	/* VSEN5 */
+	{0x02, 0x01},	/* VSEN6 */
+	{0x04, 0x01},	/* VSEN7 */
+	{0x06, 0x01},	/* VSEN8 */
+	{0x00, 0x02},	/* VSEN9 */
+	{0x02, 0x02},	/* VSEN10 */
+	{0x04, 0x02},	/* VSEN11 */
+	{0x00, 0x03},	/* VTT */
+	{0x02, 0x03},	/* 3VDD */
+	{0x04, 0x03},	/* 3VSB	*/
+	{0x06, 0x03},	/* VBAT	*/
+	{0x06, 0x04},	/* VSEN12 */
+	{0x06, 0x05},	/* VSEN13 */
+	{0x06, 0x06},	/* VSEN14 */
+	{0x06, 0x07},	/* VSEN15 */
+	{0x06, 0x08},	/* VSEN16 */
+	{0x06, 0x09},	/* VSEN17 */
+};
+
+
+#define W83795_REG_FAN(index)		(0x2E + (index))
+#define W83795_REG_FAN_MIN_HL(index)	(0xB6 + (index))
+#define W83795_REG_FAN_MIN_LSB(index)	(0xC4 + (index) / 2)
+#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \
+	(((index) & 1) ? 4 : 0)
+
+#define W83795_REG_VID_CTRL		0x6A
+
+#define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_BEEP(index)		(0x50 + (index))
+
+#define W83795_REG_CLR_CHASSIS		0x4D
+
+
+#define W83795_REG_FCMS1		0x201
+#define W83795_REG_FCMS2		0x208
+#define W83795_REG_TFMR(index)		(0x202 + (index))
+#define W83795_REG_FOMC			0x20F
+
+#define W83795_REG_TSS(index)		(0x209 + (index))
+
+#define PWM_OUTPUT			0
+#define PWM_FREQ			1
+#define PWM_START			2
+#define PWM_NONSTOP			3
+#define PWM_STOP_TIME			4
+#define W83795_REG_PWM(index, nr)	(0x210 + (nr) * 8 + (index))
+
+#define W83795_REG_FTSH(index)		(0x240 + (index) * 2)
+#define W83795_REG_FTSL(index)		(0x241 + (index) * 2)
+#define W83795_REG_TFTS			0x250
+
+#define TEMP_PWM_TTTI			0
+#define TEMP_PWM_CTFS			1
+#define TEMP_PWM_HCT			2
+#define TEMP_PWM_HOT			3
+#define W83795_REG_TTTI(index)		(0x260 + (index))
+#define W83795_REG_CTFS(index)		(0x268 + (index))
+#define W83795_REG_HT(index)		(0x270 + (index))
+
+#define SF4_TEMP			0
+#define SF4_PWM				1
+#define W83795_REG_SF4_TEMP(temp_num, index) \
+	(0x280 + 0x10 * (temp_num) + (index))
+#define W83795_REG_SF4_PWM(temp_num, index) \
+	(0x288 + 0x10 * (temp_num) + (index))
+
+#define W83795_REG_DTSC			0x301
+#define W83795_REG_DTSE			0x302
+#define W83795_REG_DTS(index)		(0x26 + (index))
+#define W83795_REG_PECI_TBASE(index)	(0x320 + (index))
+
+#define DTS_CRIT			0
+#define DTS_CRIT_HYST			1
+#define DTS_WARN			2
+#define DTS_WARN_HYST			3
+#define W83795_REG_DTS_EXT(index)	(0xB2 + (index))
+
+#define SETUP_PWM_DEFAULT		0
+#define SETUP_PWM_UPTIME		1
+#define SETUP_PWM_DOWNTIME		2
+#define W83795_REG_SETUP_PWM(index)    (0x20C + (index))
+
+static inline u16 in_from_reg(u8 index, u16 val)
+{
+	/* 3VDD, 3VSB and VBAT: 6 mV/bit; other inputs: 2 mV/bit */
+	if (index >= 12 && index <= 14)
+		return val * 6;
+	else
+		return val * 2;
+}
+
+static inline u16 in_to_reg(u8 index, u16 val)
+{
+	if (index >= 12 && index <= 14)
+		return val / 6;
+	else
+		return val / 2;
+}
+
+static inline unsigned long fan_from_reg(u16 val)
+{
+	if ((val == 0xfff) || (val == 0))
+		return 0;
+	return 1350000UL / val;
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+	if (rpm <= 0)
+		return 0x0fff;
+	return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long time_from_reg(u8 reg)
+{
+	return reg * 100;
+}
+
+static inline u8 time_to_reg(unsigned long val)
+{
+	return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+}
+
+static inline long temp_from_reg(s8 reg)
+{
+	return reg * 1000;
+}
+
+static inline s8 temp_to_reg(long val, s8 min, s8 max)
+{
+	return SENSORS_LIMIT(val / 1000, min, max);
+}
+
+static const u16 pwm_freq_cksel0[16] = {
+	1024, 512, 341, 256, 205, 171, 146, 128,
+	85, 64, 32, 16, 8, 4, 2, 1
+};
+
+static unsigned int pwm_freq_from_reg(u8 reg, u16 clkin)
+{
+	unsigned long base_clock;
+
+	if (reg & 0x80) {
+		base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+		return base_clock / ((reg & 0x7f) + 1);
+	} else
+		return pwm_freq_cksel0[reg & 0x0f];
+}
+
+static u8 pwm_freq_to_reg(unsigned long val, u16 clkin)
+{
+	unsigned long base_clock;
+	u8 reg0, reg1;
+	unsigned long best0, best1;
+
+	/* Best fit for cksel = 0 */
+	for (reg0 = 0; reg0 < ARRAY_SIZE(pwm_freq_cksel0) - 1; reg0++) {
+		if (val > (pwm_freq_cksel0[reg0] +
+			   pwm_freq_cksel0[reg0 + 1]) / 2)
+			break;
+	}
+	if (val < 375)	/* cksel = 1 can't beat this */
+		return reg0;
+	best0 = pwm_freq_cksel0[reg0];
+
+	/* Best fit for cksel = 1 */
+	base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+	reg1 = SENSORS_LIMIT(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
+	best1 = base_clock / reg1;
+	reg1 = 0x80 | (reg1 - 1);
+
+	/* Choose the closest one */
+	if (abs(val - best0) > abs(val - best1))
+		return reg1;
+	else
+		return reg0;
+}
+
+enum chip_types {w83795g, w83795adg};
+
+struct w83795_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	unsigned long last_updated;	/* In jiffies */
+	enum chip_types chip_type;
+
+	u8 bank;
+
+	u32 has_in;		/* Enable monitor VIN or not */
+	u8 has_dyn_in;		/* Only in2-0 can have this */
+	u16 in[21][3];		/* Register value, read/high/low */
+	u8 in_lsb[10][3];	/* LSB Register value, high/low */
+	u8 has_gain;		/* has gain: in17-20 * 8 */
+
+	u16 has_fan;		/* Enable fan14-1 or not */
+	u16 fan[14];		/* Register value combine */
+	u16 fan_min[14];	/* Register value combine */
+
+	u8 has_temp;		/* Enable monitor temp6-1 or not */
+	s8 temp[6][5];		/* current, crit, crit_hyst, warn, warn_hyst */
+	u8 temp_read_vrlsb[6];
+	u8 temp_mode;		/* Bit vector, 0 = TR, 1 = TD */
+	u8 temp_src[3];		/* Register value */
+
+	u8 enable_dts;		/* Enable PECI and SB-TSI,
+				 * bit 0: =1 enable, =0 disable,
+				 * bit 1: =1 AMD SB-TSI, =0 Intel PECI */
+	u8 has_dts;		/* Enable monitor DTS temp */
+	s8 dts[8];		/* Register value */
+	u8 dts_read_vrlsb[8];	/* Register value */
+	s8 dts_ext[4];		/* Register value */
+
+	u8 has_pwm;		/* 795g supports 8 pwm, 795adg only supports 2,
+				 * no config register, only affected by chip
+				 * type */
+	u8 pwm[8][5];		/* Register value, output, freq, start,
+				 *  non stop, stop time */
+	u16 clkin;		/* CLKIN frequency in kHz */
+	u8 pwm_fcms[2];		/* Register value */
+	u8 pwm_tfmr[6];		/* Register value */
+	u8 pwm_fomc;		/* Register value */
+
+	u16 target_speed[8];	/* Register value, target speed for speed
+				 * cruise */
+	u8 tol_speed;		/* tolerance of target speed */
+	u8 pwm_temp[6][4];	/* TTTI, CTFS, HCT, HOT */
+	u8 sf4_reg[6][2][7];	/* 6 temp, temp/dcpwm, 7 registers */
+
+	u8 setup_pwm[3];	/* Register value */
+
+	u8 alarms[6];		/* Register value */
+	u8 beeps[6];		/* Register value */
+
+	char valid;
+	char valid_limits;
+	char valid_pwm_config;
+};
+
+/*
+ * Hardware access
+ * We assume that nobdody can change the bank outside the driver.
+ */
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_set_bank(struct i2c_client *client, u8 bank)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int err;
+
+	/* If the same bank is already set, nothing to do */
+	if ((data->bank & 0x07) == bank)
+		return 0;
+
+	/* Change to new bank, preserve all other bits */
+	bank |= data->bank & ~0x07;
+	err = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to set bank to %d, err %d\n",
+			(int)bank, err);
+		return err;
+	}
+	data->bank = bank;
+
+	return 0;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static u8 w83795_read(struct i2c_client *client, u16 reg)
+{
+	int err;
+
+	err = w83795_set_bank(client, reg >> 8);
+	if (err < 0)
+		return 0x00;	/* Arbitrary */
+
+	err = i2c_smbus_read_byte_data(client, reg & 0xff);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to read from register 0x%03x, err %d\n",
+			(int)reg, err);
+		return 0x00;	/* Arbitrary */
+	}
+	return err;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_write(struct i2c_client *client, u16 reg, u8 value)
+{
+	int err;
+
+	err = w83795_set_bank(client, reg >> 8);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+	if (err < 0)
+		dev_err(&client->dev,
+			"Failed to write to register 0x%03x, err %d\n",
+			(int)reg, err);
+	return err;
+}
+
+static void w83795_update_limits(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int i, limit;
+
+	/* Read the voltage limits */
+	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		data->in[i][IN_MAX] =
+			w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+		data->in[i][IN_LOW] =
+			w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+	}
+	for (i = 0; i < ARRAY_SIZE(data->in_lsb); i++) {
+		if ((i == 2 && data->chip_type == w83795adg) ||
+		    (i >= 4 && !(data->has_in & (1 << (i + 11)))))
+			continue;
+		data->in_lsb[i][IN_MAX] =
+			w83795_read(client, IN_LSB_REG(i, IN_MAX));
+		data->in_lsb[i][IN_LOW] =
+			w83795_read(client, IN_LSB_REG(i, IN_LOW));
+	}
+
+	/* Read the fan limits */
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		u8 lsb;
+
+		/* Each register contains LSB for 2 fans, but we want to
+		 * read it only once to save time */
+		if ((i & 1) == 0 && (data->has_fan & (3 << i)))
+			lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
+
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		data->fan_min[i] =
+			w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
+		data->fan_min[i] |=
+			(lsb >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
+	}
+
+	/* Read the temperature limits */
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
+		for (limit = TEMP_CRIT; limit <= TEMP_WARN_HYST; limit++)
+			data->temp[i][limit] =
+				w83795_read(client, W83795_REG_TEMP[i][limit]);
+	}
+
+	/* Read the DTS limits */
+	if (data->enable_dts) {
+		for (limit = DTS_CRIT; limit <= DTS_WARN_HYST; limit++)
+			data->dts_ext[limit] =
+				w83795_read(client, W83795_REG_DTS_EXT(limit));
+	}
+
+	/* Read beep settings */
+	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+
+	data->valid_limits = 1;
+}
+
+static struct w83795_data *w83795_update_pwm_config(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	int i, tmp;
+
+	mutex_lock(&data->update_lock);
+
+	if (data->valid_pwm_config)
+		goto END;
+
+	/* Read temperature source selection */
+	for (i = 0; i < ARRAY_SIZE(data->temp_src); i++)
+		data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i));
+
+	/* Read automatic fan speed control settings */
+	data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1);
+	data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2);
+	for (i = 0; i < ARRAY_SIZE(data->pwm_tfmr); i++)
+		data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i));
+	data->pwm_fomc = w83795_read(client, W83795_REG_FOMC);
+	for (i = 0; i < data->has_pwm; i++) {
+		for (tmp = PWM_FREQ; tmp <= PWM_STOP_TIME; tmp++)
+			data->pwm[i][tmp] =
+				w83795_read(client, W83795_REG_PWM(i, tmp));
+	}
+	for (i = 0; i < ARRAY_SIZE(data->target_speed); i++) {
+		data->target_speed[i] =
+			w83795_read(client, W83795_REG_FTSH(i)) << 4;
+		data->target_speed[i] |=
+			w83795_read(client, W83795_REG_FTSL(i)) >> 4;
+	}
+	data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f;
+
+	for (i = 0; i < ARRAY_SIZE(data->pwm_temp); i++) {
+		data->pwm_temp[i][TEMP_PWM_TTTI] =
+			w83795_read(client, W83795_REG_TTTI(i)) & 0x7f;
+		data->pwm_temp[i][TEMP_PWM_CTFS] =
+			w83795_read(client, W83795_REG_CTFS(i));
+		tmp = w83795_read(client, W83795_REG_HT(i));
+		data->pwm_temp[i][TEMP_PWM_HCT] = tmp >> 4;
+		data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f;
+	}
+
+	/* Read SmartFanIV trip points */
+	for (i = 0; i < ARRAY_SIZE(data->sf4_reg); i++) {
+		for (tmp = 0; tmp < 7; tmp++) {
+			data->sf4_reg[i][SF4_TEMP][tmp] =
+				w83795_read(client,
+					    W83795_REG_SF4_TEMP(i, tmp));
+			data->sf4_reg[i][SF4_PWM][tmp] =
+				w83795_read(client, W83795_REG_SF4_PWM(i, tmp));
+		}
+	}
+
+	/* Read setup PWM */
+	for (i = 0; i < ARRAY_SIZE(data->setup_pwm); i++)
+		data->setup_pwm[i] =
+			w83795_read(client, W83795_REG_SETUP_PWM(i));
+
+	data->valid_pwm_config = 1;
+
+END:
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+static struct w83795_data *w83795_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	u16 tmp;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (!data->valid_limits)
+		w83795_update_limits(client);
+
+	if (!(time_after(jiffies, data->last_updated + HZ * 2)
+	      || !data->valid))
+		goto END;
+
+	/* Update the voltages value */
+	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
+		tmp |= w83795_read(client, W83795_REG_VRLSB) >> 6;
+		data->in[i][IN_READ] = tmp;
+	}
+
+	/* in0-2 can have dynamic limits (W83795G only) */
+	if (data->has_dyn_in) {
+		u8 lsb_max = w83795_read(client, IN_LSB_REG(0, IN_MAX));
+		u8 lsb_low = w83795_read(client, IN_LSB_REG(0, IN_LOW));
+
+		for (i = 0; i < 3; i++) {
+			if (!(data->has_dyn_in & (1 << i)))
+				continue;
+			data->in[i][IN_MAX] =
+				w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+			data->in[i][IN_LOW] =
+				w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+			data->in_lsb[i][IN_MAX] = (lsb_max >> (2 * i)) & 0x03;
+			data->in_lsb[i][IN_LOW] = (lsb_low >> (2 * i)) & 0x03;
+		}
+	}
+
+	/* Update fan */
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
+		data->fan[i] |= w83795_read(client, W83795_REG_VRLSB) >> 4;
+	}
+
+	/* Update temperature */
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		data->temp[i][TEMP_READ] =
+			w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
+		data->temp_read_vrlsb[i] =
+			w83795_read(client, W83795_REG_VRLSB);
+	}
+
+	/* Update dts temperature */
+	if (data->enable_dts) {
+		for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			data->dts[i] =
+				w83795_read(client, W83795_REG_DTS(i));
+			data->dts_read_vrlsb[i] =
+				w83795_read(client, W83795_REG_VRLSB);
+		}
+	}
+
+	/* Update pwm output */
+	for (i = 0; i < data->has_pwm; i++) {
+		data->pwm[i][PWM_OUTPUT] =
+		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
+	}
+
+	/* update alarm */
+	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+
+	data->last_updated = jiffies;
+	data->valid = 1;
+
+END:
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+/*
+ * Sysfs attributes
+ */
+
+#define ALARM_STATUS      0
+#define BEEP_ENABLE       1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index >> 3;
+	int bit = sensor_attr->index & 0x07;
+	u8 val;
+
+	if (nr == ALARM_STATUS)
+		val = (data->alarms[index] >> bit) & 1;
+	else		/* BEEP_ENABLE */
+		val = (data->beeps[index] >> bit) & 1;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index >> 3;
+	int shift = sensor_attr->index & 0x07;
+	u8 beep_bit = 1 << shift;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index));
+	data->beeps[index] &= ~beep_bit;
+	data->beeps[index] |= val << shift;
+	w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+		    struct device_attribute *attr, const char *buf,
+		    size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0 || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
+	val |= 0x80;
+	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+#define FAN_INPUT     0
+#define FAN_MIN       1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	u16 val;
+
+	if (nr == FAN_INPUT)
+		val = data->fan[index] & 0x0fff;
+	else
+		val = data->fan_min[index] & 0x0fff;
+
+	return sprintf(buf, "%lu\n", fan_from_reg(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	val = fan_to_reg(val);
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[index] = val;
+	w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff);
+	val &= 0x0f;
+	if (index & 1) {
+		val <<= 4;
+		val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+		       & 0x0f;
+	} else {
+		val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+		       & 0xf0;
+	}
+	w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data;
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned int val;
+
+	data = nr == PWM_OUTPUT ? w83795_update_device(dev)
+				: w83795_update_pwm_config(dev);
+
+	switch (nr) {
+	case PWM_STOP_TIME:
+		val = time_from_reg(data->pwm[index][nr]);
+		break;
+	case PWM_FREQ:
+		val = pwm_freq_from_reg(data->pwm[index][nr], data->clkin);
+		break;
+	default:
+		val = data->pwm[index][nr];
+		break;
+	}
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case PWM_STOP_TIME:
+		val = time_to_reg(val);
+		break;
+	case PWM_FREQ:
+		val = pwm_freq_to_reg(val, data->clkin);
+		break;
+	default:
+		val = SENSORS_LIMIT(val, 0, 0xff);
+		break;
+	}
+	w83795_write(client, W83795_REG_PWM(index, nr), val);
+	data->pwm[index][nr] = val;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = sensor_attr->index;
+	u8 tmp;
+
+	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+		tmp = 2;
+		goto out;
+	}
+	for (tmp = 0; tmp < 6; tmp++) {
+		if (data->pwm_tfmr[tmp] & (1 << index)) {
+			tmp = 3;
+			goto out;
+		}
+	}
+	if (data->pwm_fomc & (1 << index))
+		tmp = 0;
+	else
+		tmp = 1;
+
+out:
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	unsigned long val;
+	int i;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val > 2)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	switch (val) {
+	case 0:
+	case 1:
+		data->pwm_fcms[0] &= ~(1 << index);
+		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		for (i = 0; i < 6; i++) {
+			data->pwm_tfmr[i] &= ~(1 << index);
+			w83795_write(client, W83795_REG_TFMR(i),
+				data->pwm_tfmr[i]);
+		}
+		data->pwm_fomc |= 1 << index;
+		data->pwm_fomc ^= val << index;
+		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
+		break;
+	case 2:
+		data->pwm_fcms[0] |= (1 << index);
+		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		break;
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = sensor_attr->index;
+	u8 val = index / 2;
+	u8 tmp = data->temp_src[val];
+
+	if (index & 1)
+		val = 4;
+	else
+		val = 0;
+	tmp >>= val;
+	tmp &= 0x0f;
+
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_src(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	unsigned long tmp;
+	u8 val = index / 2;
+
+	if (strict_strtoul(buf, 10, &tmp) < 0)
+		return -EINVAL;
+	tmp = SENSORS_LIMIT(tmp, 0, 15);
+
+	mutex_lock(&data->update_lock);
+	if (index & 1) {
+		tmp <<= 4;
+		data->temp_src[val] &= 0x0f;
+	} else {
+		data->temp_src[val] &= 0xf0;
+	}
+	data->temp_src[val] |= tmp;
+	w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+#define TEMP_PWM_ENABLE   0
+#define TEMP_PWM_FAN_MAP  1
+static ssize_t
+show_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u8 tmp = 0xff;
+
+	switch (nr) {
+	case TEMP_PWM_ENABLE:
+		tmp = (data->pwm_fcms[1] >> index) & 1;
+		if (tmp)
+			tmp = 4;
+		else
+			tmp = 3;
+		break;
+	case TEMP_PWM_FAN_MAP:
+		tmp = data->pwm_tfmr[index];
+		break;
+	}
+
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long tmp;
+
+	if (strict_strtoul(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	switch (nr) {
+	case TEMP_PWM_ENABLE:
+		if (tmp != 3 && tmp != 4)
+			return -EINVAL;
+		tmp -= 3;
+		mutex_lock(&data->update_lock);
+		data->pwm_fcms[1] &= ~(1 << index);
+		data->pwm_fcms[1] |= tmp << index;
+		w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]);
+		mutex_unlock(&data->update_lock);
+		break;
+	case TEMP_PWM_FAN_MAP:
+		mutex_lock(&data->update_lock);
+		tmp = SENSORS_LIMIT(tmp, 0, 0xff);
+		w83795_write(client, W83795_REG_TFMR(index), tmp);
+		data->pwm_tfmr[index] = tmp;
+		mutex_unlock(&data->update_lock);
+		break;
+	}
+	return count;
+}
+
+#define FANIN_TARGET   0
+#define FANIN_TOL      1
+static ssize_t
+show_fanin(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u16 tmp = 0;
+
+	switch (nr) {
+	case FANIN_TARGET:
+		tmp = fan_from_reg(data->target_speed[index]);
+		break;
+	case FANIN_TOL:
+		tmp = data->tol_speed;
+		break;
+	}
+
+	return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_fanin(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case FANIN_TARGET:
+		val = fan_to_reg(SENSORS_LIMIT(val, 0, 0xfff));
+		w83795_write(client, W83795_REG_FTSH(index), val >> 4);
+		w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
+		data->target_speed[index] = val;
+		break;
+	case FANIN_TOL:
+		val = SENSORS_LIMIT(val, 0, 0x3f);
+		w83795_write(client, W83795_REG_TFTS, val);
+		data->tol_speed = val;
+		break;
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
+static ssize_t
+show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	long tmp = temp_from_reg(data->pwm_temp[index][nr]);
+
+	return sprintf(buf, "%ld\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+	u8 tmp;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val /= 1000;
+
+	mutex_lock(&data->update_lock);
+	switch (nr) {
+	case TEMP_PWM_TTTI:
+		val = SENSORS_LIMIT(val, 0, 0x7f);
+		w83795_write(client, W83795_REG_TTTI(index), val);
+		break;
+	case TEMP_PWM_CTFS:
+		val = SENSORS_LIMIT(val, 0, 0x7f);
+		w83795_write(client, W83795_REG_CTFS(index), val);
+		break;
+	case TEMP_PWM_HCT:
+		val = SENSORS_LIMIT(val, 0, 0x0f);
+		tmp = w83795_read(client, W83795_REG_HT(index));
+		tmp &= 0x0f;
+		tmp |= (val << 4) & 0xf0;
+		w83795_write(client, W83795_REG_HT(index), tmp);
+		break;
+	case TEMP_PWM_HOT:
+		val = SENSORS_LIMIT(val, 0, 0x0f);
+		tmp = w83795_read(client, W83795_REG_HT(index));
+		tmp &= 0xf0;
+		tmp |= val & 0x0f;
+		w83795_write(client, W83795_REG_HT(index), tmp);
+		break;
+	}
+	data->pwm_temp[index][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+
+	return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]);
+}
+
+static ssize_t
+store_sf4_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	w83795_write(client, W83795_REG_SF4_PWM(index, nr), val);
+	data->sf4_reg[index][SF4_PWM][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+
+	return sprintf(buf, "%u\n",
+		(data->sf4_reg[index][SF4_TEMP][nr]) * 1000);
+}
+
+static ssize_t
+store_sf4_temp(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val /= 1000;
+
+	mutex_lock(&data->update_lock);
+	w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val);
+	data->sf4_reg[index][SF4_TEMP][nr] = val;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	long temp = temp_from_reg(data->temp[index][nr]);
+
+	if (nr == TEMP_READ)
+		temp += (data->temp_read_vrlsb[index] >> 6) * 250;
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	long tmp;
+
+	if (strict_strtol(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->temp[index][nr] = temp_to_reg(tmp, -128, 127);
+	w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+static ssize_t
+show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	int tmp;
+
+	if (data->enable_dts & 2)
+		tmp = 5;
+	else
+		tmp = 6;
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+show_dts(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	long temp = temp_from_reg(data->dts[index]);
+
+	temp += (data->dts_read_vrlsb[index] >> 6) * 250;
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct w83795_data *data = dev_get_drvdata(dev);
+	long temp = temp_from_reg(data->dts_ext[nr]);
+
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_dts_ext(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	long tmp;
+
+	if (strict_strtol(buf, 10, &tmp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->dts_ext[nr] = temp_to_reg(tmp, -128, 127);
+	w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	int tmp;
+
+	if (data->temp_mode & (1 << index))
+		tmp = 3;	/* Thermal diode */
+	else
+		tmp = 4;	/* Thermistor */
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+/* Only for temp1-4 (temp5-6 can only be thermistor) */
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	int reg_shift;
+	unsigned long val;
+	u8 tmp;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if ((val != 4) && (val != 3))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	if (val == 3) {
+		/* Thermal diode */
+		val = 0x01;
+		data->temp_mode |= 1 << index;
+	} else if (val == 4) {
+		/* Thermistor */
+		val = 0x03;
+		data->temp_mode &= ~(1 << index);
+	}
+
+	reg_shift = 2 * index;
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+	tmp &= ~(0x03 << reg_shift);
+	tmp |= val << reg_shift;
+	w83795_write(client, W83795_REG_TEMP_CTRL2, tmp);
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+/* show/store VIN */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83795_data *data = w83795_update_device(dev);
+	u16 val = data->in[index][nr];
+	u8 lsb_idx;
+
+	switch (nr) {
+	case IN_READ:
+		/* calculate this value again by sensors as sensors3.conf */
+		if ((index >= 17) &&
+		    !((data->has_gain >> (index - 17)) & 1))
+			val *= 8;
+		break;
+	case IN_MAX:
+	case IN_LOW:
+		lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+		val <<= 2;
+		val |= (data->in_lsb[lsb_idx][nr] >>
+			IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]) & 0x03;
+		if ((index >= 17) &&
+		    !((data->has_gain >> (index - 17)) & 1))
+			val *= 8;
+		break;
+	}
+	val = in_from_reg(index, val);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+	 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 tmp;
+	u8 lsb_idx;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	val = in_to_reg(index, val);
+
+	if ((index >= 17) &&
+	    !((data->has_gain >> (index - 17)) & 1))
+		val /= 8;
+	val = SENSORS_LIMIT(val, 0, 0x3FF);
+	mutex_lock(&data->update_lock);
+
+	lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+	tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr));
+	tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]);
+	tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT];
+	w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp);
+	data->in_lsb[lsb_idx][nr] = tmp;
+
+	tmp = (val >> 2) & 0xff;
+	w83795_write(client, W83795_REG_IN[index][nr], tmp);
+	data->in[index][nr] = tmp;
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	u16 val = data->setup_pwm[nr];
+
+	switch (nr) {
+	case SETUP_PWM_UPTIME:
+	case SETUP_PWM_DOWNTIME:
+		val = time_from_reg(val);
+		break;
+	}
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+	 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83795_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	switch (nr) {
+	case SETUP_PWM_DEFAULT:
+		val = SENSORS_LIMIT(val, 0, 0xff);
+		break;
+	case SETUP_PWM_UPTIME:
+	case SETUP_PWM_DOWNTIME:
+		val = time_to_reg(val);
+		if (val == 0)
+			return -EINVAL;
+		break;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->setup_pwm[nr] = val;
+	w83795_write(client, W83795_REG_SETUP_PWM(nr), val);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+#endif
+
+
+#define NOT_USED			-1
+
+/* Don't change the attribute order, _max and _min are accessed by index
+ * somewhere else in the code */
+#define SENSOR_ATTR_IN(index) {						\
+	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
+		IN_READ, index), \
+	SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_MAX, index),				\
+	SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_LOW, index),				\
+	SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \
+	SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE,		\
+		index + ((index > 14) ? 1 : 0)) }
+
+#define SENSOR_ATTR_FAN(index) {					\
+	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
+		NULL, FAN_INPUT, index - 1), \
+	SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO,		\
+		show_fan, store_fan_min, FAN_MIN, index - 1),	\
+	SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + 31),			\
+	SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) }
+
+#define SENSOR_ATTR_PWM(index) {					\
+	SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm,		\
+		store_pwm, PWM_OUTPUT, index - 1),			\
+	SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_NONSTOP, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_START, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO,	\
+		show_pwm, store_pwm, PWM_STOP_TIME, index - 1),	 \
+	SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO,	\
+		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
+	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
+		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
+		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+
+#define SENSOR_ATTR_DTS(index) {					\
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
+		show_dts_mode, NULL, NOT_USED, index - 7),	\
+	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts,		\
+		NULL, NOT_USED, index - 7),				\
+	SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_dts_ext, \
+		store_dts_ext, DTS_CRIT, NOT_USED),			\
+	SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR,	\
+		show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED),	\
+	SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \
+		store_dts_ext, DTS_WARN, NOT_USED),			\
+	SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED),	\
+	SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,			\
+		show_alarm_beep, NULL, ALARM_STATUS, index + 17),	\
+	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+
+#define SENSOR_ATTR_TEMP(index) {					\
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
+		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,		\
+		NULL, TEMP_READ, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_CRIT, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_CRIT_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_WARN, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_WARN_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,			\
+		show_alarm_beep, NULL, ALARM_STATUS,			\
+		index + (index > 4 ? 11 : 17)),				\
+	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE,		\
+		index + (index > 4 ? 11 : 17)),				\
+	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
+		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm_enable, store_temp_pwm_enable,		\
+		TEMP_PWM_ENABLE, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \
+		show_temp_pwm_enable, store_temp_pwm_enable,		\
+		TEMP_PWM_FAN_MAP, index - 1),				\
+	SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO,		\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \
+	SENSOR_ATTR_2(temp##index##_warn, S_IWUSR | S_IRUGO,		\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \
+	SENSOR_ATTR_2(temp##index##_warn_hyst, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \
+	SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO,	\
+		show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \
+	SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+		show_sf4_pwm, store_sf4_pwm, 6, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+		show_sf4_temp, store_sf4_temp, 6, index - 1) }
+
+
+static struct sensor_device_attribute_2 w83795_in[][5] = {
+	SENSOR_ATTR_IN(0),
+	SENSOR_ATTR_IN(1),
+	SENSOR_ATTR_IN(2),
+	SENSOR_ATTR_IN(3),
+	SENSOR_ATTR_IN(4),
+	SENSOR_ATTR_IN(5),
+	SENSOR_ATTR_IN(6),
+	SENSOR_ATTR_IN(7),
+	SENSOR_ATTR_IN(8),
+	SENSOR_ATTR_IN(9),
+	SENSOR_ATTR_IN(10),
+	SENSOR_ATTR_IN(11),
+	SENSOR_ATTR_IN(12),
+	SENSOR_ATTR_IN(13),
+	SENSOR_ATTR_IN(14),
+	SENSOR_ATTR_IN(15),
+	SENSOR_ATTR_IN(16),
+	SENSOR_ATTR_IN(17),
+	SENSOR_ATTR_IN(18),
+	SENSOR_ATTR_IN(19),
+	SENSOR_ATTR_IN(20),
+};
+
+static const struct sensor_device_attribute_2 w83795_fan[][4] = {
+	SENSOR_ATTR_FAN(1),
+	SENSOR_ATTR_FAN(2),
+	SENSOR_ATTR_FAN(3),
+	SENSOR_ATTR_FAN(4),
+	SENSOR_ATTR_FAN(5),
+	SENSOR_ATTR_FAN(6),
+	SENSOR_ATTR_FAN(7),
+	SENSOR_ATTR_FAN(8),
+	SENSOR_ATTR_FAN(9),
+	SENSOR_ATTR_FAN(10),
+	SENSOR_ATTR_FAN(11),
+	SENSOR_ATTR_FAN(12),
+	SENSOR_ATTR_FAN(13),
+	SENSOR_ATTR_FAN(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+	SENSOR_ATTR_TEMP(1),
+	SENSOR_ATTR_TEMP(2),
+	SENSOR_ATTR_TEMP(3),
+	SENSOR_ATTR_TEMP(4),
+	SENSOR_ATTR_TEMP(5),
+	SENSOR_ATTR_TEMP(6),
+};
+
+static const struct sensor_device_attribute_2 w83795_dts[][8] = {
+	SENSOR_ATTR_DTS(7),
+	SENSOR_ATTR_DTS(8),
+	SENSOR_ATTR_DTS(9),
+	SENSOR_ATTR_DTS(10),
+	SENSOR_ATTR_DTS(11),
+	SENSOR_ATTR_DTS(12),
+	SENSOR_ATTR_DTS(13),
+	SENSOR_ATTR_DTS(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+	SENSOR_ATTR_PWM(1),
+	SENSOR_ATTR_PWM(2),
+	SENSOR_ATTR_PWM(3),
+	SENSOR_ATTR_PWM(4),
+	SENSOR_ATTR_PWM(5),
+	SENSOR_ATTR_PWM(6),
+	SENSOR_ATTR_PWM(7),
+	SENSOR_ATTR_PWM(8),
+};
+
+static const struct sensor_device_attribute_2 sda_single_files[] = {
+	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_chassis_clear, ALARM_STATUS, 46),
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
+		store_fanin, FANIN_TOL, NOT_USED),
+	SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+	SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+	SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+#endif
+};
+
+/*
+ * Driver interface
+ */
+
+static void w83795_init_client(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	static const u16 clkin[4] = {	/* in kHz */
+		14318, 24000, 33333, 48000
+	};
+	u8 config;
+
+	if (reset)
+		w83795_write(client, W83795_REG_CONFIG, 0x80);
+
+	/* Start monitoring if needed */
+	config = w83795_read(client, W83795_REG_CONFIG);
+	if (!(config & W83795_REG_CONFIG_START)) {
+		dev_info(&client->dev, "Enabling monitoring operations\n");
+		w83795_write(client, W83795_REG_CONFIG,
+			     config | W83795_REG_CONFIG_START);
+	}
+
+	data->clkin = clkin[(config >> 3) & 0x3];
+	dev_dbg(&client->dev, "clkin = %u kHz\n", data->clkin);
+}
+
+static int w83795_get_device_id(struct i2c_client *client)
+{
+	int device_id;
+
+	device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID);
+
+	/* Special case for rev. A chips; can't be checked first because later
+	   revisions emulate this for compatibility */
+	if (device_id < 0 || (device_id & 0xf0) != 0x50) {
+		int alt_id;
+
+		alt_id = i2c_smbus_read_byte_data(client,
+						  W83795_REG_DEVICEID_A);
+		if (alt_id == 0x50)
+			device_id = alt_id;
+	}
+
+	return device_id;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83795_detect(struct i2c_client *client,
+			 struct i2c_board_info *info)
+{
+	int bank, vendor_id, device_id, expected, i2c_addr, config;
+	struct i2c_adapter *adapter = client->adapter;
+	unsigned short address = client->addr;
+	const char *chip_name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+	bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+	if (bank < 0 || (bank & 0x7c)) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "bank");
+		return -ENODEV;
+	}
+
+	/* Check Nuvoton vendor ID */
+	vendor_id = i2c_smbus_read_byte_data(client, W83795_REG_VENDORID);
+	expected = bank & 0x80 ? 0x5c : 0xa3;
+	if (vendor_id != expected) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "vendor id");
+		return -ENODEV;
+	}
+
+	/* Check device ID */
+	device_id = w83795_get_device_id(client) |
+		    (i2c_smbus_read_byte_data(client, W83795_REG_CHIPID) << 8);
+	if ((device_id >> 4) != 0x795) {
+		dev_dbg(&adapter->dev,
+			"w83795: Detection failed at addr 0x%02hx, check %s\n",
+			address, "device id\n");
+		return -ENODEV;
+	}
+
+	/* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
+	   should match */
+	if ((bank & 0x07) == 0) {
+		i2c_addr = i2c_smbus_read_byte_data(client,
+						    W83795_REG_I2C_ADDR);
+		if ((i2c_addr & 0x7f) != address) {
+			dev_dbg(&adapter->dev,
+				"w83795: Detection failed at addr 0x%02hx, "
+				"check %s\n", address, "i2c addr");
+			return -ENODEV;
+		}
+	}
+
+	/* Check 795 chip type: 795G or 795ADG
+	   Usually we don't write to chips during detection, but here we don't
+	   quite have the choice; hopefully it's OK, we are about to return
+	   success anyway */
+	if ((bank & 0x07) != 0)
+		i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
+					  bank & ~0x07);
+	config = i2c_smbus_read_byte_data(client, W83795_REG_CONFIG);
+	if (config & W83795_REG_CONFIG_CONFIG48)
+		chip_name = "w83795adg";
+	else
+		chip_name = "w83795g";
+
+	strlcpy(info->type, chip_name, I2C_NAME_SIZE);
+	dev_info(&adapter->dev, "Found %s rev. %c at 0x%02hx\n", chip_name,
+		 'A' + (device_id & 0xf), address);
+
+	return 0;
+}
+
+static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
+			       const struct device_attribute *))
+{
+	struct w83795_data *data = dev_get_drvdata(dev);
+	int err, i, j;
+
+	for (i = 0; i < ARRAY_SIZE(w83795_in); i++) {
+		if (!(data->has_in & (1 << i)))
+			continue;
+		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			err = fn(dev, &w83795_in[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			err = fn(dev, &w83795_fan[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+		err = fn(dev, &sda_single_files[i].dev_attr);
+		if (err)
+			return err;
+	}
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+	for (i = 0; i < data->has_pwm; i++) {
+		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
+			err = fn(dev, &w83795_pwm[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+		for (j = 0; j < ARRAY_SIZE(w83795_temp[0]); j++) {
+#else
+		for (j = 0; j < 8; j++) {
+#endif
+			err = fn(dev, &w83795_temp[i][j].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
+	if (data->enable_dts) {
+		for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				err = fn(dev, &w83795_dts[i][j].dev_attr);
+				if (err)
+					return err;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* We need a wrapper that fits in w83795_handle_files */
+static int device_remove_file_wrapper(struct device *dev,
+				      const struct device_attribute *attr)
+{
+	device_remove_file(dev, attr);
+	return 0;
+}
+
+static void w83795_check_dynamic_in_limits(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+	u8 vid_ctl;
+	int i, err_max, err_min;
+
+	vid_ctl = w83795_read(client, W83795_REG_VID_CTRL);
+
+	/* Return immediately if VRM isn't configured */
+	if ((vid_ctl & 0x07) == 0x00 || (vid_ctl & 0x07) == 0x07)
+		return;
+
+	data->has_dyn_in = (vid_ctl >> 3) & 0x07;
+	for (i = 0; i < 2; i++) {
+		if (!(data->has_dyn_in & (1 << i)))
+			continue;
+
+		/* Voltage limits in dynamic mode, switch to read-only */
+		err_max = sysfs_chmod_file(&client->dev.kobj,
+					   &w83795_in[i][2].dev_attr.attr,
+					   S_IRUGO);
+		err_min = sysfs_chmod_file(&client->dev.kobj,
+					   &w83795_in[i][3].dev_attr.attr,
+					   S_IRUGO);
+		if (err_max || err_min)
+			dev_warn(&client->dev, "Failed to set in%d limits "
+				 "read-only (%d, %d)\n", i, err_max, err_min);
+		else
+			dev_info(&client->dev, "in%d limits set dynamically "
+				 "from VID\n", i);
+	}
+}
+
+/* Check pins that can be used for either temperature or voltage monitoring */
+static void w83795_apply_temp_config(struct w83795_data *data, u8 config,
+				     int temp_chan, int in_chan)
+{
+	/* config is a 2-bit value */
+	switch (config) {
+	case 0x2: /* Voltage monitoring */
+		data->has_in |= 1 << in_chan;
+		break;
+	case 0x1: /* Thermal diode */
+		if (temp_chan >= 4)
+			break;
+		data->temp_mode |= 1 << temp_chan;
+		/* fall through */
+	case 0x3: /* Thermistor */
+		data->has_temp |= 1 << temp_chan;
+		break;
+	}
+}
+
+static int w83795_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int i;
+	u8 tmp;
+	struct device *dev = &client->dev;
+	struct w83795_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct w83795_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->chip_type = id->driver_data;
+	data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+	mutex_init(&data->update_lock);
+
+	/* Initialize the chip */
+	w83795_init_client(client);
+
+	/* Check which voltages and fans are present */
+	data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1)
+		     | (w83795_read(client, W83795_REG_VOLT_CTRL2) << 8);
+	data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1)
+		      | (w83795_read(client, W83795_REG_FANIN_CTRL2) << 8);
+
+	/* Check which analog temperatures and extra voltages are present */
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
+	if (tmp & 0x20)
+		data->enable_dts = 1;
+	w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 5, 16);
+	w83795_apply_temp_config(data, tmp & 0x3, 4, 15);
+	tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+	w83795_apply_temp_config(data, tmp >> 6, 3, 20);
+	w83795_apply_temp_config(data, (tmp >> 4) & 0x3, 2, 19);
+	w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 1, 18);
+	w83795_apply_temp_config(data, tmp & 0x3, 0, 17);
+
+	/* Check DTS enable status */
+	if (data->enable_dts) {
+		if (1 & w83795_read(client, W83795_REG_DTSC))
+			data->enable_dts |= 2;
+		data->has_dts = w83795_read(client, W83795_REG_DTSE);
+	}
+
+	/* Report PECI Tbase values */
+	if (data->enable_dts == 1) {
+		for (i = 0; i < 8; i++) {
+			if (!(data->has_dts & (1 << i)))
+				continue;
+			tmp = w83795_read(client, W83795_REG_PECI_TBASE(i));
+			dev_info(&client->dev,
+				 "PECI agent %d Tbase temperature: %u\n",
+				 i + 1, (unsigned int)tmp & 0x7f);
+		}
+	}
+
+	data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;
+
+	/* pwm and smart fan */
+	if (data->chip_type == w83795g)
+		data->has_pwm = 8;
+	else
+		data->has_pwm = 2;
+
+	err = w83795_handle_files(dev, device_create_file);
+	if (err)
+		goto exit_remove;
+
+	if (data->chip_type == w83795g)
+		w83795_check_dynamic_in_limits(client);
+
+	data->hwmon_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	w83795_handle_files(dev, device_remove_file_wrapper);
+	kfree(data);
+exit:
+	return err;
+}
+
+static int w83795_remove(struct i2c_client *client)
+{
+	struct w83795_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	w83795_handle_files(&client->dev, device_remove_file_wrapper);
+	kfree(data);
+
+	return 0;
+}
+
+
+static const struct i2c_device_id w83795_id[] = {
+	{ "w83795g", w83795g },
+	{ "w83795adg", w83795adg },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83795_id);
+
+static struct i2c_driver w83795_driver = {
+	.driver = {
+		   .name = "w83795",
+	},
+	.probe		= w83795_probe,
+	.remove		= w83795_remove,
+	.id_table	= w83795_id,
+
+	.class		= I2C_CLASS_HWMON,
+	.detect		= w83795_detect,
+	.address_list	= normal_i2c,
+};
+
+static int __init sensors_w83795_init(void)
+{
+	return i2c_add_driver(&w83795_driver);
+}
+
+static void __exit sensors_w83795_exit(void)
+{
+	i2c_del_driver(&w83795_driver);
+}
+
+MODULE_AUTHOR("Wei Song, Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("W83795G/ADG hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83795_init);
+module_exit(sensors_w83795_exit);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index fd85bde..3d7355f 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -256,4 +256,30 @@ config PMAC_RACKMETER
 	  This driver provides some support to control the front panel
           blue LEDs "vu-meter" of the XServer macs.
 
+config SENSORS_AMS
+	tristate "Apple Motion Sensor driver"
+	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+	select INPUT_POLLDEV
+	help
+	  Support for the motion sensor included in PowerBooks. Includes
+	  implementations for PMU and I2C.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ams.
+
+config SENSORS_AMS_PMU
+	bool "PMU variant"
+	depends on SENSORS_AMS && ADB_PMU
+	default y
+	help
+	  PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+	bool "I2C variant"
+	depends on SENSORS_AMS && I2C
+	default y
+	help
+	  I2C variant of motion sensor, found in early 2005 PowerBooks and
+	  iBooks.
+
 endif # MACINTOSH_DRIVERS
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index e3132ef..6652a6e 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -48,3 +48,5 @@ obj-$(CONFIG_WINDFARM_PM121)	+= windfarm_pm121.o windfarm_smu_sat.o \
 				   windfarm_max6690_sensor.o \
 				   windfarm_lm75_sensor.o windfarm_pid.o
 obj-$(CONFIG_PMAC_RACKMETER)	+= rack-meter.o
+
+obj-$(CONFIG_SENSORS_AMS)	+= ams/
diff --git a/drivers/hwmon/ams/Makefile b/drivers/macintosh/ams/Makefile
index 41c95b2..41c95b2 100644
--- a/drivers/hwmon/ams/Makefile
+++ b/drivers/macintosh/ams/Makefile
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/macintosh/ams/ams-core.c
index 2ad62c3..2ad62c3 100644
--- a/drivers/hwmon/ams/ams-core.c
+++ b/drivers/macintosh/ams/ams-core.c
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c
index abeecd2..abeecd2 100644
--- a/drivers/hwmon/ams/ams-i2c.c
+++ b/drivers/macintosh/ams/ams-i2c.c
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/macintosh/ams/ams-input.c
index 8a71239..8a71239 100644
--- a/drivers/hwmon/ams/ams-input.c
+++ b/drivers/macintosh/ams/ams-input.c
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/macintosh/ams/ams-pmu.c
index 4f61b3e..4f61b3e 100644
--- a/drivers/hwmon/ams/ams-pmu.c
+++ b/drivers/macintosh/ams/ams-pmu.c
diff --git a/drivers/hwmon/ams/ams.h b/drivers/macintosh/ams/ams.h
index 90f094d..90f094d 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/macintosh/ams/ams.h
author	Linus Torvalds <torvalds@linux-foundation.org>	2010-10-28 12:17:00 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2010-10-28 12:17:00 -0700
commit	150cd843fac0160fce616fb3e5cbe64e9db7481e (patch)
tree	eca7ed23a2238665462ff92fe6e9b591da3e092a
parent	f063a0c0c995d010960efcc1b2ed14b99674f25c (diff)
parent	44c1bcd4bcde32b2a31a6775a277706ab489c0dc (diff)
download	op-kernel-dev-150cd843fac0160fce616fb3e5cbe64e9db7481e.zip op-kernel-dev-150cd843fac0160fce616fb3e5cbe64e9db7481e.tar.gz