summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Korsgaard <jacmet@sunsite.dk>2011-04-26 01:45:41 +0000
committerDavid S. Miller <davem@davemloft.net>2011-04-28 13:35:44 -0700
commitb3b270054b80e6195b1d2b2ce082239911261839 (patch)
treeabdebb8715a776d8ac9d8093ab84ffd8a2970f50
parent68972efa657040f891c7eda07c7da8c8dd576788 (diff)
downloadop-kernel-dev-b3b270054b80e6195b1d2b2ce082239911261839.zip
op-kernel-dev-b3b270054b80e6195b1d2b2ce082239911261839.tar.gz
dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085
The 88e6085 has a few differences from the other devices in the port control registers, causing unknown multicast/broadcast packets to get dropped when using the standard port setup. At the same time update kconfig to clarify that the mv88e6085 is now supported. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--net/dsa/Kconfig4
-rw-r--r--net/dsa/mv88e6131.c26
2 files changed, 23 insertions, 7 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 87bb5f4..c53ded2 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU
default n
config NET_DSA_MV88E6131
- bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+ bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
select NET_DSA_MV88E6XXX
select NET_DSA_MV88E6XXX_NEED_PPU
select NET_DSA_TAG_DSA
---help---
- This enables support for the Marvell 88E6095/6095F/6131
+ This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
config NET_DSA_MV88E6123_61_65
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index 3da4188..45f7411 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -207,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* mode, but do not enable forwarding of unknown unicasts.
*/
val = 0x0433;
- if (p == dsa_upstream_port(ds))
+ if (p == dsa_upstream_port(ds)) {
val |= 0x0104;
+ /*
+ * On 6085, unknown multicast forward is controlled
+ * here rather than in Port Control 2 register.
+ */
+ if (ps->id == ID_6085)
+ val |= 0x0008;
+ }
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
REG_WRITE(addr, 0x04, val);
@@ -251,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* If this is the upstream port for this switch, enable
* forwarding of unknown multicast addresses.
*/
- val = 0x0080 | dsa_upstream_port(ds);
- if (p == dsa_upstream_port(ds))
- val |= 0x0040;
- REG_WRITE(addr, 0x08, val);
+ if (ps->id == ID_6085)
+ /*
+ * on 6085, bits 3:0 are reserved, bit 6 control ARP
+ * mirroring, and multicast forward is handled in
+ * Port Control register.
+ */
+ REG_WRITE(addr, 0x08, 0x0080);
+ else {
+ val = 0x0080 | dsa_upstream_port(ds);
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0040;
+ REG_WRITE(addr, 0x08, val);
+ }
/*
* Rate Control: disable ingress rate limiting.
OpenPOWER on IntegriCloud