Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits)
  MIPS: Lasat: Fix botched changes to sysctl code.
  RTC: rtc-cmos.c: Fix warning on MIPS
  MIPS: Cleanup random differences beween lmo and Linus' kernel.
  MIPS: No longer hardwire CONFIG_EMBEDDED to y
  MIPS: Fix and enhance built-in kernel command line
  MIPS: eXcite: Remove platform.
  MIPS: Loongson: Cleanups of serial port support
  MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer
  MIPS: Excite: move iodev_remove to .devexit.text
  MIPS: Lasat: Convert to proc_fops / seq_file
  MIPS: Cleanup signal code initialization
  MIPS: Modularize COP2 handling
  MIPS: Move EARLY_PRINTK to Kconfig.debug
  MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function
  MIPS: Yeeloong 2F: Add LID open event as the wakeup event
  MIPS: Yeeloong 2F: Add basic EC operations
  MIPS: Move several variables from .bss to .init.data
  MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address
  MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5
  MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer
  ...

255 files changed, 18310 insertions, 4878 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index fd7620f..9541171 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,9 +5,12 @@ config MIPS
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB
-	# Horrible source of confusion.  Die, die, die ...
-	select EMBEDDED
-	select RTC_LIB if !LEMOTE_FULOONG2E
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select RTC_LIB if !MACH_LOONGSON
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -22,6 +25,7 @@ choice
 
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
+	select SYS_SUPPORTS_ZBOOT
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -36,6 +40,7 @@ config AR7
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	select GENERIC_GPIO
 	select GCD
 	select VLYNQ
@@ -43,23 +48,6 @@ config AR7
 	  Support for the Texas Instruments AR7 System-on-a-Chip
 	  family: TNETD7100, 7200 and 7300.
 
-config BASLER_EXCITE
-	bool "Basler eXcite smart camera"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
-	select MIPS_RM9122
-	select SYS_HAS_CPU_RM9000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	help
-	  The eXcite is a smart camera platform manufactured by
-	  Basler Vision Technologies AG.
-
 config BCM47XX
 	bool "BCM47XX based boards"
 	select CEVT_R4K
@@ -192,6 +180,7 @@ config LASAT
 
 config MACH_LOONGSON
 	bool "Loongson family of machines"
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  This enables the support of Loongson family of machines.
 
@@ -233,6 +222,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
+	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
@@ -334,6 +324,24 @@ config PMC_YOSEMITE
 	  Yosemite is an evaluation board for the RM9000x2 processor
 	  manufactured by PMC-Sierra.
 
+config POWERTV
+	bool "Cisco PowerTV"
+	select BOOT_ELF32
+	select CEVT_R4K
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_POWERTV
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select USB_OHCI_LITTLE_ENDIAN
+	help
+	  This enables support for the Cisco PowerTV Platform.
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
@@ -674,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/powertv/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -778,6 +786,9 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
+config CSRC_POWERTV
+	bool
+
 config CSRC_R4K_LIB
 	bool
 
@@ -806,20 +817,6 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
 	bool
 
-config EARLY_PRINTK
-	bool "Early printk" if EMBEDDED && DEBUG_KERNEL
-	depends on SYS_HAS_EARLY_PRINTK
-	default y
-	help
-	  This option enables special console drivers which allow the kernel
-	  to print messages very early in the bootup process.
-
-	  This is useful for kernel debugging when your machine crashes very
-	  early before the console code is initialized. For normal operation,
-	  it is not recommended because it looks ugly on some machines and
-	  doesn't cooperate with an X server. You should normally say N here,
-	  unless you want to debug such a crash.
-
 config SYS_HAS_EARLY_PRINTK
 	bool
 
@@ -1069,6 +1066,21 @@ config CPU_LOONGSON2E
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
 
+	  It has an internal FPGA northbridge, which is compatiable to
+	  bonito64.
+
+config CPU_LOONGSON2F
+	bool "Loongson 2F"
+	depends on SYS_HAS_CPU_LOONGSON2F
+	select CPU_LOONGSON2
+	help
+	  The Loongson 2F processor implements the MIPS III instruction set
+	  with many extensions.
+
+	  Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
+	  have a similar programming interface with FPGA northbridge used in
+	  Loongson2E.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1294,6 +1306,16 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
+config SYS_SUPPORTS_ZBOOT
+	bool
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
+
+config SYS_SUPPORTS_ZBOOT_UART16550
+	bool
+	select SYS_SUPPORTS_ZBOOT
+
 config CPU_LOONGSON2
 	bool
 	select CPU_SUPPORTS_32BIT_KERNEL
@@ -1303,6 +1325,12 @@ config CPU_LOONGSON2
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
+config SYS_HAS_CPU_LOONGSON2F
+	bool
+	select CPU_SUPPORTS_CPUFREQ
+	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
+	select CPU_SUPPORTS_UNCACHED_ACCELERATED
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -1411,8 +1439,17 @@ config CPU_SUPPORTS_32BIT_KERNEL
 	bool
 config CPU_SUPPORTS_64BIT_KERNEL
 	bool
+config CPU_SUPPORTS_CPUFREQ
+	bool
+config CPU_SUPPORTS_ADDRWINCFG
+	bool
 config CPU_SUPPORTS_HUGEPAGES
 	bool
+config CPU_SUPPORTS_UNCACHED_ACCELERATED
+	bool
+config MIPS_PGD_C0_CONTEXT
+	bool
+	default y if 64BIT && CPU_MIPSR2
 
 #
 # Set to y for ptrace access to watch registers.
@@ -2024,15 +2061,6 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
-config PROBE_INITRD_HEADER
-	bool "Probe initrd header created by addinitrd"
-	depends on BLK_DEV_INITRD
-	help
-	  Probe initrd header at the last page of kernel image.
-	  Say Y here if you are using arch/mips/boot/addinitrd.c to
-	  add initrd or initramfs image to the kernel image.
-	  Otherwise, say N.
-
 source "kernel/Kconfig.freezer"
 
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
@@ -2104,6 +2132,7 @@ config MMU
 
 config I8253
 	bool
+	select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32
 	bool
@@ -2180,6 +2209,8 @@ source "kernel/power/Kconfig"
 
 endmenu
 
+source "arch/mips/kernel/cpufreq/Kconfig"
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 364ca89..d2b88a0 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -6,15 +6,66 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED
+	depends on SYS_HAS_EARLY_PRINTK
+	default y
+	help
+	  This option enables special console drivers which allow the kernel
+	  to print messages very early in the bootup process.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation,
+	  it is not recommended because it looks ugly on some machines and
+	  doesn't cooperate with an X server. You should normally say N here,
+	  unless you want to debug such a crash.
+
+config CMDLINE_BOOL
+	bool "Built-in kernel command line"
+	default n
+	help
+	  For most systems, it is firmware or second stage bootloader that
+	  by default specifies the kernel command line options.  However,
+	  it might be necessary or advantageous to either override the
+	  default kernel command line or add a few extra options to it.
+	  For such cases, this option allows you to hardcode your own
+	  command line options directly into the kernel.  For that, you
+	  should choose 'Y' here, and fill in the extra boot arguments
+	  in CONFIG_CMDLINE.
+
+	  The built-in options will be concatenated to the default command
+	  line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
+	  command line will be ignored and replaced by the built-in string.
+
+	  Most MIPS systems will normally expect 'N' here and rely upon
+	  the command line from the firmware or the second-stage bootloader.
+
 config CMDLINE
 	string "Default kernel command string"
+	depends on CMDLINE_BOOL
 	default ""
 	help
 	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  other cases you can specify kernel args so that you don't have
-	  to set them up in board prom initialization routines.
+	  pass arguments to the kernel.  For these platforms, and for the cases
+	  when you want to add some extra options to the command line or ignore
+	  the default command line, you can supply some command-line options at
+	  build time by entering them here.  In other cases you can specify
+	  kernel args so that you don't have to set them up in board prom
+	  initialization routines.
+
+	  For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
+	  options.
+
+config CMDLINE_OVERRIDE
+	bool "Built-in command line overrides firware arguments"
+	default n
+	depends on CMDLINE_BOOL
+	help
+	  By setting this option to 'Y' you will have your kernel ignore
+	  command line arguments from firmware or second stage bootloader.
+	  Instead, the built-in command line will be used exclusively.
+
+	  Normally, you will choose 'N' here.
 
 config DEBUG_STACK_USAGE
 	bool "Enable stack utilization instrumentation"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 77f5021..1893efd 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -48,7 +48,16 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+ifndef CONFIG_FUNCTION_TRACER
 cflags-y := -ffunction-sections
+endif
+ifdef CONFIG_FUNCTION_GRAPH_TRACER
+  ifndef KBUILD_MCOUNT_RA_ADDRESS
+    ifeq ($(call cc-option-yn,-mmcount-ra-address), y)
+      cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS
+    endif
+  endif
+endif
 cflags-y += $(call cc-option, -mno-check-zero-division)
 
 ifdef CONFIG_32BIT
@@ -69,6 +78,7 @@ endif
 
 all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)
 all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64)
+all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
 
 #
 # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
@@ -124,6 +134,8 @@ cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
 cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+	$(call cc-option,-march=loongson2f,-march=r4600)
 
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
@@ -324,6 +336,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
 cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
                     -mno-branch-likely
 load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
 
 #
 # MIPS Malta board
@@ -331,7 +344,7 @@ load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
 cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
+all-$(CONFIG_MIPS_MALTA)	:= vmlinuz.bin
 
 #
 # MIPS SIM
@@ -356,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemit
 load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
 
 #
-# Basler eXcite
-#
-core-$(CONFIG_BASLER_EXCITE)	+= arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE)	+= -I$(srctree)/arch/mips/include/asm/mach-excite
-load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
-
-#
 # LASAT platforms
 #
 core-$(CONFIG_LASAT)		+= arch/mips/lasat/
@@ -441,6 +447,13 @@ core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
 load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
 
 #
+# Cisco PowerTV Platform
+#
+core-$(CONFIG_POWERTV)		+= arch/mips/powertv/
+cflags-$(CONFIG_POWERTV)        += -I$(srctree)/arch/mips/include/asm/mach-powertv
+load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
+
+#
 # SGI IP22 (Indy/Indigo2)
 #
 # Set the load address to >= 0xffffffff88069000 if you want to leave space for
@@ -581,7 +594,7 @@ load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
 else
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
 endif
-all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
+all-$(CONFIG_SNI_RM)		:= vmlinuz.ecoff
 
 #
 # Common TXx9
@@ -699,9 +712,23 @@ vmlinux.64: vmlinux
 	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 
 makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
+makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
+	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1)
 
 all:	$(all-y)
 
+vmlinuz: vmlinux FORCE
+	+@$(call makezboot,$@)
+
+vmlinuz.bin: vmlinux
+	+@$(call makezboot,$@)
+
+vmlinuz.ecoff: vmlinux
+	+@$(call makezboot,$@)
+
+vmlinuz.srec: vmlinux
+	+@$(call makezboot,$@)
+
 vmlinux.bin: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
@@ -726,11 +753,13 @@ endif
 
 install:
 	$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+	$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
 	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
 	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
 
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
+	@$(MAKE) $(clean)=arch/mips/boot/compressed
 	@$(MAKE) $(clean)=arch/mips/lasat
 
 define archhelp
@@ -738,10 +767,18 @@ define archhelp
 	echo '  vmlinux.ecoff        - ECOFF boot image'
 	echo '  vmlinux.bin          - Raw binary boot image'
 	echo '  vmlinux.srec         - SREC boot image'
+	echo '  vmlinuz              - Compressed boot(zboot) image'
+	echo '  vmlinuz.ecoff        - ECOFF zboot image'
+	echo '  vmlinuz.bin          - Raw binary zboot image'
+	echo '  vmlinuz.srec         - SREC zboot image'
 	echo
 	echo '  These will be default as apropriate for a configured platform.'
 endef
 
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
-	       vmlinux.ecoff
+	       vmlinux.ecoff \
+	       vmlinuz \
+	       vmlinuz.ecoff \
+	       vmlinuz.bin \
+	       vmlinuz.srec
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 835f3f0..85169c0 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -505,7 +505,7 @@ static int __init ar7_register_devices(void)
 	int res;
 	u32 *bootcr, val;
 #ifdef CONFIG_SERIAL_8250
-	static struct uart_port uart_port[2];
+	static struct uart_port uart_port[2] __initdata;
 
 	memset(uart_port, 0, sizeof(struct uart_port) * 2);
 
diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig
deleted file mode 100644
index ba50607..0000000
--- a/arch/mips/basler/excite/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-config BASLER_EXCITE_PROTOTYPE
-	bool "Support for pre-release units"
-	depends on BASLER_EXCITE
-	default n
-	help
-	  Pre-series (prototype) units are different from later ones in
-	  some ways. Select this option if you have one of these. Please
-	  note that a kernel built with this option selected will not be
-	  able to run on normal units.
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
deleted file mode 100644
index cff29cf..0000000
--- a/arch/mips/basler/excite/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Basler eXcite
-#
-
-obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
-				   excite_device.o excite_procfs.o
-
-obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
deleted file mode 100644
index e00bc2d..0000000
--- a/arch/mips/basler/excite/excite_device.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/err.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-#include <rm9k_eth.h>
-#include <rm9k_wdt.h>
-#include <rm9k_xicap.h>
-#include <excite_nandflash.h>
-
-#include "excite_iodev.h"
-
-#define RM9K_GE_UNIT	0
-#define XICAP_UNIT	0
-#define NAND_UNIT	0
-
-#define DLL_TIMEOUT	3		/* seconds */
-
-
-#define RINIT(__start__, __end__, __name__, __parent__) {	\
-	.name	= __name__ "_0",				\
-	.start	= (__start__),					\
-	.end	= (__end__),					\
-	.flags	= 0,						\
-	.parent	= (__parent__)					\
-}
-
-#define RINIT_IRQ(__irq__, __name__) {	\
-	.name	= __name__ "_0",	\
-	.start	= (__irq__),		\
-	.end	= (__irq__),		\
-	.flags	= IORESOURCE_IRQ,	\
-	.parent	= NULL			\
-}
-
-
-
-enum {
-	slice_xicap,
-	slice_eth
-};
-
-
-
-static struct resource
-	excite_ctr_resource __maybe_unused = {
-		.name		= "GPI counters",
-		.start		= 0,
-		.end		= 5,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_gpislice_resource __maybe_unused = {
-		.name		= "GPI slices",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_mdio_channel_resource __maybe_unused = {
-		.name		= "MDIO channels",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fifomem_resource __maybe_unused = {
-		.name		= "FIFO memory",
-		.start		= 0,
-		.end		= 767,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_scram_resource __maybe_unused = {
-		.name		= "Scratch RAM",
-		.start		= EXCITE_PHYS_SCRAM,
-		.end		= EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fpga_resource __maybe_unused = {
-		.name		= "System FPGA",
-		.start		= EXCITE_PHYS_FPGA,
-		.end		= EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_nand_resource __maybe_unused = {
-		.name		= "NAND flash control",
-		.start		= EXCITE_PHYS_NAND,
-		.end		= EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_titan_resource __maybe_unused = {
-		.name		= "TITAN registers",
-		.start		= EXCITE_PHYS_TITAN,
-		.end		= EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	};
-
-
-
-static void adjust_resources(struct resource *res, unsigned int n)
-{
-	struct resource *p;
-	const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA;
-
-	for (p = res; p < res + n; p++) {
-		const struct resource * const parent = p->parent;
-		if (parent) {
-			p->start += parent->start;
-			p->end   += parent->start;
-			p->flags =  parent->flags & mask;
-		}
-	}
-}
-
-
-
-#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
-static struct resource xicap_rsrc[] = {
-	RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
-	RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
-	RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
-	RINIT_IRQ(TITAN_IRQ,  XICAP_RESOURCE_IRQ)
-};
-
-static struct platform_device xicap_pdev = {
-	.name		= XICAP_NAME,
-	.id		= XICAP_UNIT,
-	.num_resources	= ARRAY_SIZE(xicap_rsrc),
-	.resource	= xicap_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init xicap_devinit(void)
-{
-	unsigned long tend;
-	u32 reg;
-	int retval;
-
-	adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11100 << slice_xicap);
-	titan_writel(reg, CPTC1R);
-
-	/* Enable slice & DLL. */
-	reg= titan_readl(CPRR);
-	reg &= ~(0x00030003 << (slice_xicap * 2));
-	titan_writel(reg, CPRR);
-
-	/* Wait for DLLs to lock */
-	tend = jiffies + DLL_TIMEOUT * HZ;
-	while (time_before(jiffies, tend)) {
-		if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
-			break;
-		yield();
-	}
-
-	if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
-		printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
-		       xicap_pdev.name, DLL_TIMEOUT);
-		retval = -ETIME;
-	} else {
-		/* Register platform device */
-		retval = platform_device_register(&xicap_pdev);
-	}
-
-	return retval;
-}
-
-device_initcall(xicap_devinit);
-#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
-
-
-
-#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
-static struct resource wdt_rsrc[] = {
-	RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
-	RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
-	RINIT_IRQ(TITAN_IRQ,  WDT_RESOURCE_IRQ)
-};
-
-static struct platform_device wdt_pdev = {
-	.name		= WDT_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_rsrc),
-	.resource	= wdt_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init wdt_devinit(void)
-{
-	adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
-	return platform_device_register(&wdt_pdev);
-}
-
-device_initcall(wdt_devinit);
-#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
-
-
-
-static struct resource excite_nandflash_rsrc[] = {
- 	RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS,  &excite_nand_resource)
-};
-
-static struct platform_device excite_nandflash_pdev = {
-	.name		= "excite_nand",
-	.id		= NAND_UNIT,
-	.num_resources	= ARRAY_SIZE(excite_nandflash_rsrc),
-	.resource	= excite_nandflash_rsrc
-};
-
-/*
- * Create a platform device for the access to the nand-flash
- * port
- */
-static int __init excite_nandflash_devinit(void)
-{
-	adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
-
-        /* nothing to be done here */
-
-        /* Register platform device */
-	return platform_device_register(&excite_nandflash_pdev);
-}
-
-device_initcall(excite_nandflash_devinit);
-
-
-
-static struct resource iodev_rsrc[] = {
-	RINIT_IRQ(FPGA1_IRQ,  IODEV_RESOURCE_IRQ)
-};
-
-static struct platform_device io_pdev = {
-	.name		= IODEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(iodev_rsrc),
-	.resource	= iodev_rsrc
-};
-
-/*
- * Create a platform device for the external I/O ports.
- */
-static int __init io_devinit(void)
-{
-	adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
-	return platform_device_register(&io_pdev);
-}
-
-device_initcall(io_devinit);
-
-
-
-
-#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
-static struct resource rm9k_ge_rsrc[] = {
-	RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
-	RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
-	RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
-	RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
-	RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
-	RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
-	RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
-	RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
-	RINIT_IRQ(TITAN_IRQ,  RM9K_GE_RESOURCE_IRQ_MAIN),
-	RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
-};
-
-static struct platform_device rm9k_ge_pdev = {
-	.name		= RM9K_GE_NAME,
-	.id		= RM9K_GE_UNIT,
-	.num_resources	= ARRAY_SIZE(rm9k_ge_rsrc),
-	.resource	= rm9k_ge_rsrc
-};
-
-
-
-/*
- * Create a platform device for the Ethernet port.
- */
-static int __init rm9k_ge_devinit(void)
-{
-	u32 reg;
-
-	adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11000 << slice_eth);
-	reg |= 0x100 << slice_eth;
-	titan_writel(reg, CPTC1R);
-
-	/* Take the MAC out of reset, reset the DLLs. */
-	reg = titan_readl(CPRR);
-	reg &= ~(0x00030000 << (slice_eth * 2));
-	reg |= 0x3 << (slice_eth * 2);
-	titan_writel(reg, CPRR);
-
-	return platform_device_register(&rm9k_ge_pdev);
-}
-
-device_initcall(rm9k_ge_devinit);
-#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
-
-
-
-static int __init excite_setup_devs(void)
-{
-	int res;
-	u32 reg;
-
-	/* Enable xdma and fifo interrupts */
-	reg = titan_readl(0x0050);
-	titan_writel(reg | 0x18000000, 0x0050);
-
-	res = request_resource(&iomem_resource, &excite_titan_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_scram_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_fpga_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_nand_resource);
-	if (res)
-		return res;
-	excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-	excite_nand_resource.flags = excite_nand_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-
-	return 0;
-}
-
-arch_initcall(excite_setup_devs);
-
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
deleted file mode 100644
index 938b1d0..0000000
--- a/arch/mips/basler/excite/excite_iodev.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  Copyright (C) 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-#include "excite_iodev.h"
-
-
-
-static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
-static int __init iodev_probe(struct platform_device *);
-static int __exit iodev_remove(struct platform_device *);
-static int iodev_open(struct inode *, struct file *);
-static int iodev_release(struct inode *, struct file *);
-static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
-static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
-static irqreturn_t iodev_irqhdl(int, void *);
-
-
-
-static const char iodev_name[] = "iodev";
-static unsigned int iodev_irq;
-static DECLARE_WAIT_QUEUE_HEAD(wq);
-
-
-
-static const struct file_operations fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= iodev_open,
-	.release	= iodev_release,
-	.read		= iodev_read,
-	.poll		= iodev_poll
-};
-
-static struct miscdevice miscdev =
-{
-	.minor		= MISC_DYNAMIC_MINOR,
-	.name		= iodev_name,
-	.fops		= &fops
-};
-
-static struct platform_driver iodev_driver = {
-	.driver = {
-		.name		= iodev_name,
-		.owner		= THIS_MODULE,
-	},
-	.probe		= iodev_probe,
-	.remove		= __devexit_p(iodev_remove),
-};
-
-
-
-static const struct resource *
-iodev_get_resource(struct platform_device *pdv, const char *name,
-		     unsigned int type)
-{
-	char buf[80];
-	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
-		return NULL;
-	return platform_get_resource_byname(pdv, type, buf);
-}
-
-
-
-/* No hotplugging on the platform bus - use __init */
-static int __init iodev_probe(struct platform_device *dev)
-{
-	const struct resource * const ri =
-		iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
-
-	if (unlikely(!ri))
-		return -ENXIO;
-
-	iodev_irq = ri->start;
-	return misc_register(&miscdev);
-}
-
-
-
-static int __exit iodev_remove(struct platform_device *dev)
-{
-	return misc_deregister(&miscdev);
-}
-
-static int iodev_open(struct inode *i, struct file *f)
-{
-	int ret;
-
-	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
-			   iodev_name, &miscdev);
-
-	return ret;
-}
-
-static int iodev_release(struct inode *i, struct file *f)
-{
-	free_irq(iodev_irq, &miscdev);
-	return 0;
-}
-
-
-
-
-static ssize_t
-iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
-{
-	ssize_t ret;
-	DEFINE_WAIT(w);
-
-	prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
-	if (!signal_pending(current))
-		schedule();
-	ret = signal_pending(current) ? -ERESTARTSYS : 0;
-	finish_wait(&wq, &w);
-	return ret;
-}
-
-
-static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
-{
-	poll_wait(f, &wq, p);
-	return POLLOUT | POLLWRNORM;
-}
-
-static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
-{
-	wake_up(&wq);
-
-	return IRQ_HANDLED;
-}
-
-static int __init iodev_init_module(void)
-{
-	return platform_driver_register(&iodev_driver);
-}
-
-
-
-static void __exit iodev_cleanup_module(void)
-{
-	platform_driver_unregister(&iodev_driver);
-}
-
-module_init(iodev_init_module);
-module_exit(iodev_cleanup_module);
-
-
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
-MODULE_VERSION("0.0");
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h
deleted file mode 100644
index cbfbb5d..0000000
--- a/arch/mips/basler/excite/excite_iodev.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __EXCITE_IODEV_H__
-#define __EXCITE_IODEV_H__
-
-/* Device name */
-#define IODEV_NAME		"iodev"
-
-/* Resource names */
-#define IODEV_RESOURCE_IRQ	"excite_iodev_irq"
-
-#endif /* __EXCITE_IODEV_H__ */
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
deleted file mode 100644
index 934e0a6..0000000
--- a/arch/mips/basler/excite/excite_irq.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- *  Copyright (C) by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslereb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-extern asmlinkage void excite_handle_int(void);
-
-/*
- * Initialize the interrupt handler
- */
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-	rm7k_cpu_irq_init();
-	rm9k_cpu_irq_init();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	const u32
-		interrupts = read_c0_cause() >> 8,
-		mask = ((read_c0_status() >> 8) & 0x000000ff) |
-		       (read_c0_intcontrol() & 0x0000ff00),
-		pending = interrupts & mask;
-	u32 msgintflags, msgintmask, msgint;
-
-	/* process timer interrupt */
-	if (pending & (1 << TIMER_IRQ)) {
-		do_IRQ(TIMER_IRQ);
-		return;
-	}
-
-	/* Process PCI interrupts */
-#if USB_IRQ < 10
-	msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
-	if ((pending & (1 << USB_IRQ)) && msgint) {
-#else
-	if (pending & (1 << USB_IRQ)) {
-#endif
-		do_IRQ(USB_IRQ);
-		return;
-	}
-
-	/* Process TITAN interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
-	if ((pending & (1 << TITAN_IRQ)) && msgint) {
-		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-		do_IRQ(TITAN_IRQ);
-		return;
-	}
-
-	/* Process FPGA line #0 interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
-	if ((pending & (1 << FPGA0_IRQ)) && msgint) {
-		do_IRQ(FPGA0_IRQ);
-		return;
-	}
-
-	/* Process FPGA line #1 interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
-	if ((pending & (1 << FPGA1_IRQ)) && msgint) {
-		do_IRQ(FPGA1_IRQ);
-		return;
-	}
-
-	/* Process PHY interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
-	if ((pending & (1 << PHY_IRQ)) && msgint) {
-		do_IRQ(PHY_IRQ);
-		return;
-	}
-
-	/* Process spurious interrupts */
-	spurious_interrupt();
-}
diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c
deleted file mode 100644
index 08923e6..0000000
--- a/arch/mips/basler/excite/excite_procfs.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  Procfs support for Basler eXcite
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/stat.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-static int excite_unit_id_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%06x", unit_id);
-	return 0;
-}
-
-static int excite_unit_id_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, excite_unit_id_proc_show, NULL);
-}
-
-static const struct file_operations excite_unit_id_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= excite_unit_id_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int
-excite_bootrom_read(char *page, char **start, off_t off, int count,
-		  int *eof, void *data)
-{
-	void __iomem * src;
-
-	if (off >= EXCITE_SIZE_BOOTROM) {
-		*eof = 1;
-		return 0;
-	}
-
-	if ((off + count) > EXCITE_SIZE_BOOTROM)
-		count = EXCITE_SIZE_BOOTROM - off;
-
-	src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
-	if (src) {
-		memcpy_fromio(page, src, count);
-		iounmap(src);
-		*start = page;
-	} else {
-		count = -ENOMEM;
-	}
-
-	return count;
-}
-
-void excite_procfs_init(void)
-{
-	/* Create & populate /proc/excite */
-	struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL);
-	if (pdir) {
-		struct proc_dir_entry * e;
-
-		e = proc_create("unit_id", S_IRUGO, pdir,
-				&excite_unit_id_proc_fops);
-		if (e) e->size = 6;
-
-		e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
-					   excite_bootrom_read, NULL);
-		if (e) e->size = EXCITE_SIZE_BOOTROM;
-	}
-}
diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c
deleted file mode 100644
index 68d8bc5..0000000
--- a/arch/mips/basler/excite/excite_prom.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
- *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- *  Manish Lachwani.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/bootinfo.h>
-#include <asm/string.h>
-
-#include <excite.h>
-
-/* This struct is used by Redboot to pass arguments to the kernel */
-typedef struct
-{
-	char *name;
-	char *val;
-} t_env_var;
-
-struct parmblock {
-	t_env_var memsize;
-	t_env_var modetty0;
-	t_env_var ethaddr;
-	t_env_var env_end;
-	char *argv[2];
-	char text[0];
-};
-
-static unsigned int prom_argc;
-static const char ** prom_argv;
-static const t_env_var * prom_env;
-
-static void prom_halt(void) __attribute__((noreturn));
-static void prom_exit(void) __attribute__((noreturn));
-
-
-
-const char *get_system_type(void)
-{
-	return "Basler eXcite";
-}
-
-/*
- * Halt the system
- */
-static void prom_halt(void)
-{
-	printk(KERN_NOTICE "\n** System halted.\n");
-	while (1)
-		asm volatile (
-			"\t.set\tmips3\n"
-			"\twait\n"
-			"\t.set\tmips0\n"
-		);
-}
-
-/*
- * Reset the CPU and re-enter Redboot
- */
-static void prom_exit(void)
-{
-	unsigned int i;
-	volatile unsigned char * const flg =
-		(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
-
-	/* Clear the watchdog reset flag, set the reboot flag */
-	*flg &= ~0x01;
-	*flg |= 0x80;
-
-	for (i = 0; i < 10; i++) {
-		*(volatile unsigned char *)  (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
-		iob();
-		mdelay(1000);
-	}
-
-	printk(KERN_NOTICE "Reset failed\n");
-	prom_halt();
-}
-
-static const char __init *prom_getenv(char *name)
-{
-	const t_env_var * p;
-	for (p = prom_env; p->name != NULL; p++)
-		if(strcmp(name, p->name) == 0)
-			break;
-	return p->val;
-}
-
-/*
- * Init routine which accepts the variables from Redboot
- */
-void __init prom_init(void)
-{
-	const struct parmblock * const pb = (struct parmblock *) fw_arg2;
-
-	prom_argc = fw_arg0;
-	prom_argv = (const char **) fw_arg1;
-	prom_env = &pb->memsize;
-
-	/* Callbacks for halt, restart */
-	_machine_restart = (void (*)(char *)) prom_exit;
-	_machine_halt = prom_halt;
-
-#ifdef CONFIG_32BIT
-	/* copy command line */
-	strcpy(arcs_cmdline, prom_argv[1]);
-	memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
-	strcpy(modetty, prom_getenv("modetty0"));
-#endif /* CONFIG_32BIT */
-
-#ifdef CONFIG_64BIT
-#	error 64 bit support not implemented
-#endif /* CONFIG_64BIT */
-}
-
-/* This is called from free_initmem(), so we need to provide it */
-void __init prom_free_prom_memory(void)
-{
-	/* Nothing to do */
-}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
deleted file mode 100644
index d66b3b8..0000000
--- a/arch/mips/basler/excite/excite_setup.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- *  Manish Lachwani.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable-32.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-#define TITAN_UART_CLK	25000000
-
-#if 1
-/* normal serial port assignment */
-#define REGBASE_SER0	0x0208
-#define REGBASE_SER1	0x0238
-#define MASK_SER0	0x1
-#define MASK_SER1	0x2
-#else
-/* serial ports swapped */
-#define REGBASE_SER0	0x0238
-#define REGBASE_SER1	0x0208
-#define MASK_SER0	0x2
-#define MASK_SER1	0x1
-#endif
-
-unsigned long memsize;
-char modetty[30];
-unsigned int titan_irq = TITAN_IRQ;
-static void __iomem * ctl_regs;
-u32 unit_id;
-
-volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
-volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
-
-/* Protect access to shared GPI registers */
-DEFINE_SPINLOCK(titan_lock);
-int titan_irqflags;
-
-
-/*
- * The eXcite platform uses the alternate timer interrupt
- *
- * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
- * to handle the alternate timer interrupt of the RM9000.
- */
-void __init plat_time_init(void)
-{
-	const u32 modebit5 = ocd_readl(0x00e4);
-	unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
-	unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
-
-	if (div == 33)
-		div = 1;
-	mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
-}
-
-static int __init excite_init_console(void)
-{
-#if defined(CONFIG_SERIAL_8250)
-	static __initdata char serr[] =
-		KERN_ERR "Serial port #%u setup failed\n";
-	struct uart_port up;
-
-	/* Take the DUART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-
-#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
-	/* Enable both ports */
-	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
-#else
-	/* Enable port #0 only */
-	titan_writel(MASK_SER0, UACFG);
-#endif
-
- 	/*
-	 * Set up serial port #0. Do not use autodetection; the result is
-	 * not what we want.
- 	 */
-	memset(&up, 0, sizeof(up));
-	up.membase	= (char *) titan_addr(REGBASE_SER0);
-	up.irq		= TITAN_IRQ;
-	up.uartclk	= TITAN_UART_CLK;
-	up.regshift	= 0;
-	up.iotype	= UPIO_RM9000;
-	up.type		= PORT_RM9000;
-	up.flags	= UPF_SHARE_IRQ;
-	up.line		= 0;
-	if (early_serial_setup(&up))
-		printk(serr, up.line);
-
-#if CONFIG_SERIAL_8250_NR_UARTS > 1
-	/* And now for port #1. */
-	up.membase	= (char *) titan_addr(REGBASE_SER1);
-	up.line		= 1;
- 	if (early_serial_setup(&up))
-		printk(serr, up.line);
-#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
-#else
-	/* Leave the DUART in reset */
-	titan_writel(0x00ff3cff, CPRR);
-#endif  /* defined(CONFIG_SERIAL_8250) */
-
-	return 0;
-}
-
-static int __init excite_platform_init(void)
-{
-	unsigned int i;
-	unsigned char buf[3];
-	u8 reg;
-	void __iomem * dpr;
-
-	/* BIU buffer allocations */
-	ocd_writel(8, CPURSLMT);	/* CPU */
-	titan_writel(4, CPGRWL);	/* GPI / Ethernet */
-
-	/* Map control registers located in FPGA */
-	ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
-	if (!ctl_regs)
-		panic("eXcite: failed to map platform control registers\n");
-	memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
-	unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
-
-	/* Clear the reboot flag */
-	dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
-	reg = __raw_readb(dpr);
-	__raw_writeb(reg & 0x7f, dpr);
-	iounmap(dpr);
-
-	/* Interrupt controller setup */
-	for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
-		ocd_writel(0x00000000, i + 0x04);
-		ocd_writel(0xffffffff, i + 0x0c);
-	}
-	ocd_writel(0x2, NMICONFIG);
-
-	ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
-		   INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
-	ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
-	ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
-	ocd_writel((0x1 << (PHY_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
-#if USB_IRQ < 10
-	ocd_writel((0x1 << (USB_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
-#endif
-	/* Enable the packet FIFO, XDMA and XDMA arbiter */
-	titan_writel(0x00ff18ff, CPRR);
-
-	/*
-	 * Set up the PADMUX. Power down all ethernet slices,
-	 * they will be powered up and configured at device startup.
-	 */
-	titan_writel(0x00878206, CPTC1R);
-	titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
-
-	/* Reset and enable the FIFO block */
-	titan_writel(0x00000001, SDRXFCIE);
-	titan_writel(0x00000001, SDTXFCIE);
-	titan_writel(0x00000100, SDRXFCIE);
-	titan_writel(0x00000000, SDTXFCIE);
-
-	/*
-	 * Initialize the common interrupt shared by all components of
-	 * the GPI/Ethernet subsystem.
-	 */
-	titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
-	titan_writel(TITAN_MSGINT, CPCFG1);
-
-	/*
-	 * XDMA configuration.
-	 * In order for the XDMA to be sharable among multiple drivers,
-	 * the setup must be done here in the platform. The reason is that
-	 * this setup can only be done while the XDMA is in reset. If this
-	 * were done in a driver, it would interrupt all other drivers
-	 * using the XDMA.
-	 */
-	titan_writel(0x80021dff, GXCFG);	/* XDMA reset */
-	titan_writel(0x00000000, CPXCISRA);
-	titan_writel(0x00000000, CPXCISRB);	/* clear pending interrupts */
-#if defined(CONFIG_HIGHMEM)
-#	error change for HIGHMEM support!
-#else
-	titan_writel(0x00000000, GXDMADRPFX);	/* buffer address prefix */
-#endif
-	titan_writel(0, GXDMA_DESCADR);
-
-	for (i = 0x5040; i <= 0x5300; i += 0x0040)
-		titan_writel(0x80080000, i);	/* reset channel */
-
-	titan_writel((0x1 << 29)			/* no sparse tx descr. */
-		     | (0x1 << 28)			/* no sparse rx descr. */
-		     | (0x1 << 23) | (0x1 << 24)	/* descriptor coherency */
-		     | (0x1 << 21) | (0x1 << 22)	/* data coherency */
-		     | (0x1 << 17)
-		     | 0x1dff,
-		     GXCFG);
-
-#if defined(CONFIG_SMP)
-#	error No SMP support
-#else
-	/* All interrupts go to core #0 only. */
-	titan_writel(0x1f007fff, CPDST0A);
-	titan_writel(0x00000000, CPDST0B);
-	titan_writel(0x0000ff3f, CPDST1A);
-	titan_writel(0x00000000, CPDST1B);
-	titan_writel(0x00ffffff, CPXDSTA);
-	titan_writel(0x00000000, CPXDSTB);
-#endif
-
-	/* Enable DUART interrupts, disable everything else. */
-	titan_writel(0x04000000, CPGIG0ER);
-	titan_writel(0x000000c0, CPGIG1ER);
-
-	excite_procfs_init();
-	return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-	volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
-
-	/* Announce RAM to system */
-	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-
-	/* Set up the peripheral address map */
-	*(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
-	wmb();
-	*(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
-	wmb();
-
-	ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
-	ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
-	ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
-	ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
-
-	/* Local bus slot #0 */
-	ocd_writel(0x00040510, LDP0);
-	ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
-	ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
-
-	/* Local bus slot #2 */
-	ocd_writel(0x00000330, LDP2);
-	ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
-	ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
-
-	/* Local bus slot #3 */
-	ocd_writel(0x00123413, LDP3);
-	ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
-	ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
-}
-
-
-
-console_initcall(excite_init_console);
-arch_initcall(excite_platform_init);
-
-EXPORT_SYMBOL(titan_lock);
-EXPORT_SYMBOL(titan_irqflags);
-EXPORT_SYMBOL(titan_irq);
-EXPORT_SYMBOL(ocd_base);
-EXPORT_SYMBOL(titan_base);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index fb284c3..c51405e 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -100,11 +100,11 @@ static __init void prom_init_console(void)
 
 static __init void prom_init_cmdline(void)
 {
-	static char buf[CL_SIZE] __initdata;
+	static char buf[COMMAND_LINE_SIZE] __initdata;
 
 	/* Get the kernel command line from CFE */
-	if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
-		buf[CL_SIZE-1] = 0;
+	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+		buf[COMMAND_LINE_SIZE - 1] = 0;
 		strcpy(arcs_cmdline, buf);
 	}
 
@@ -112,13 +112,13 @@ static __init void prom_init_cmdline(void)
 	 * as CFE is not available anymore later in the boot process. */
 	if ((strstr(arcs_cmdline, "console=")) == NULL) {
 		/* Try to read the default serial port used by CFE */
-		if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0)
+		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
 		    || (strncmp("uart", buf, 4)))
 			/* Default to uart0 */
 			strcpy(buf, "uart0");
 
 		/* Compute the new command line */
-		snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200",
+		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
 			 arcs_cmdline, buf[4]);
 	}
 }
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 2a209d7..094bc84 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -25,7 +25,7 @@ strip-flags	= $(addprefix --remove-section=,$(drop-sections))
 
 VMLINUX = vmlinux
 
-all: vmlinux.ecoff vmlinux.srec addinitrd
+all: vmlinux.ecoff vmlinux.srec
 
 vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
 	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
@@ -39,11 +39,7 @@ vmlinux.bin: $(VMLINUX)
 vmlinux.srec: $(VMLINUX)
 	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
 
-$(obj)/addinitrd: $(obj)/addinitrd.c
-	$(HOSTCC) -o $@ $^
-
-clean-files += addinitrd \
-	       elf2ecoff \
+clean-files += elf2ecoff \
 	       vmlinux.bin \
 	       vmlinux.ecoff \
 	       vmlinux.srec
diff --git a/arch/mips/boot/addinitrd.c b/arch/mips/boot/addinitrd.c
deleted file mode 100644
index b5b3feb..0000000
--- a/arch/mips/boot/addinitrd.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * addinitrd - program to add a initrd image to an ecoff kernel
- *
- * (C) 1999 Thomas Bogendoerfer
- * minor modifications, cleanup: Guido Guenther <agx@sigxcpu.org>
- * further cleanup: Maciej W. Rozycki
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <netinet/in.h>
-
-#include "ecoff.h"
-
-#define MIPS_PAGE_SIZE	4096
-#define MIPS_PAGE_MASK	(MIPS_PAGE_SIZE-1)
-
-#define swab16(x) \
-        ((unsigned short)( \
-                (((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \
-                (((unsigned short)(x) & (unsigned short)0xff00U) >> 8) ))
-
-#define swab32(x) \
-        ((unsigned int)( \
-                (((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \
-                (((unsigned int)(x) & (unsigned int)0x0000ff00UL) <<  8) | \
-                (((unsigned int)(x) & (unsigned int)0x00ff0000UL) >>  8) | \
-                (((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) ))
-
-#define SWAB(a)	(swab ? swab32(a) : (a))
-
-void die(char *s)
-{
-	perror(s);
-	exit(1);
-}
-
-int main(int argc, char *argv[])
-{
-	int fd_vmlinux, fd_initrd, fd_outfile;
-	FILHDR efile;
-	AOUTHDR eaout;
-	SCNHDR esecs[3];
-	struct stat st;
-	char buf[1024];
-	unsigned long loadaddr;
-	unsigned long initrd_header[2];
-	int i, cnt;
-	int swab = 0;
-
-	if (argc != 4) {
-		printf("Usage: %s <vmlinux> <initrd> <outfile>\n", argv[0]);
-		exit(1);
-	}
-
-	if ((fd_vmlinux = open (argv[1], O_RDONLY)) < 0)
-		 die("open vmlinux");
-	if (read (fd_vmlinux, &efile, sizeof efile) != sizeof efile)
-		die("read file header");
-	if (read (fd_vmlinux, &eaout, sizeof eaout) != sizeof eaout)
-		die("read aout header");
-	if (read (fd_vmlinux, esecs, sizeof esecs) != sizeof esecs)
-		die("read section headers");
-	/*
-	 * check whether the file is good for us
-	 */
-	/* TBD */
-
-	/*
-	 * check, if we have to swab words
-	 */
-	if (ntohs(0xaa55) == 0xaa55) {
-		if (efile.f_magic == swab16(MIPSELMAGIC))
-			swab = 1;
-	} else {
-		if (efile.f_magic == swab16(MIPSEBMAGIC))
-			swab = 1;
-	}
-
-	/* make sure we have an empty data segment for the initrd */
-	if (eaout.dsize || esecs[1].s_size) {
-		fprintf(stderr, "Data segment not empty. Giving up!\n");
-		exit(1);
-	}
-	if ((fd_initrd = open (argv[2], O_RDONLY)) < 0)
-		die("open initrd");
-	if (fstat (fd_initrd, &st) < 0)
-		die("fstat initrd");
-	loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)
-			+ MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8;
-	if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)))
-		loadaddr += MIPS_PAGE_SIZE;
-	initrd_header[0] = SWAB(0x494E5244);
-	initrd_header[1] = SWAB(st.st_size);
-	eaout.dsize = esecs[1].s_size = initrd_header[1] = SWAB(st.st_size+8);
-	eaout.data_start = esecs[1].s_vaddr = esecs[1].s_paddr = SWAB(loadaddr);
-
-	if ((fd_outfile = open (argv[3], O_RDWR|O_CREAT|O_TRUNC, 0666)) < 0)
-		die("open outfile");
-	if (write (fd_outfile, &efile, sizeof efile) != sizeof efile)
-		die("write file header");
-	if (write (fd_outfile, &eaout, sizeof eaout) != sizeof eaout)
-		die("write aout header");
-	if (write (fd_outfile, esecs, sizeof esecs) != sizeof esecs)
-		die("write section headers");
-	/* skip padding */
-	if(lseek(fd_vmlinux, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1)
-		die("lseek vmlinux");
-	if(lseek(fd_outfile, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1)
-		die("lseek outfile");
-	/* copy text segment */
-	cnt = SWAB(eaout.tsize);
-	while (cnt) {
-		if ((i = read (fd_vmlinux, buf, sizeof buf)) <= 0)
-			die("read vmlinux");
-		if (write (fd_outfile, buf, i) != i)
-			die("write vmlinux");
-		cnt -= i;
-	}
-	if (write (fd_outfile, initrd_header, sizeof initrd_header) != sizeof initrd_header)
-		die("write initrd header");
-	while ((i = read (fd_initrd, buf, sizeof buf)) > 0)
-		if (write (fd_outfile, buf, i) != i)
-			die("write initrd");
-	close(fd_vmlinux);
-	close(fd_initrd);
-	return 0;
-}
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
new file mode 100644
index 0000000..e27f40b
--- /dev/null
+++ b/arch/mips/boot/compressed/Makefile
@@ -0,0 +1,100 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.
+#
+# Adapted for MIPS Pete Popov, Dan Malek
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Adapted for PowerPC by Gary Thomas
+# modified by Cort (cort@cs.nmt.edu)
+#
+# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
+# Author: Wu Zhangjin <wuzj@lemote.com>
+#
+
+# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
+VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
+VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
+VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))))
+
+# set the default size of the mallocing area for decompressing
+BOOT_HEAP_SIZE := 0x400000
+
+# Disable Function Tracer
+KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
+
+KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+
+KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+
+obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+
+obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+
+OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
+$(obj)/vmlinux.bin: $(KBUILD_IMAGE)
+	$(call if_changed,objcopy)
+
+suffix_$(CONFIG_KERNEL_GZIP)  = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+tool_$(CONFIG_KERNEL_GZIP)    = gzip
+tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
+tool_$(CONFIG_KERNEL_LZMA)    = lzma
+$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
+	$(call if_changed,$(tool_y))
+
+$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \
+		--add-section=.image=$< \
+		--set-section-flags=.image=contents,alloc,load,readonly,data \
+		$(obj)/dummy.o $@
+
+LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
+vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
+	$(call if_changed,ld)
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+
+#
+# Some DECstations need all possible sections of an ECOFF executable
+#
+ifdef CONFIG_MACH_DECSTATION
+  E2EFLAGS = -a
+else
+  E2EFLAGS =
+endif
+
+# elf2ecoff can only handle 32bit image
+
+ifdef CONFIG_32BIT
+	VMLINUZ = vmlinuz
+else
+	VMLINUZ = vmlinuz.32
+endif
+
+vmlinuz.32: vmlinuz
+	$(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+
+vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
+	$(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS)
+
+$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
+	$(Q)$(HOSTCC) -o $@ $^
+
+drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags	= $(addprefix --remove-section=,$(drop-sections))
+
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
+vmlinuz.bin: vmlinuz
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+vmlinuz.srec: vmlinuz
+	$(call if_changed,objcopy)
+
+clean:
+clean-files += *.o \
+	       vmlinu*
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
new file mode 100644
index 0000000..ff4dc7a
--- /dev/null
+++ b/arch/mips/boot/compressed/dbg.c
@@ -0,0 +1,37 @@
+/*
+ * MIPS-specific debug support for pre-boot environment
+ *
+ * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * need to implement your own putc().
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+
+void __attribute__ ((weak)) putc(char c)
+{
+}
+
+void puts(const char *s)
+{
+	char c;
+	while ((c = *s++) != '\0') {
+		putc(c);
+		if (c == '\n')
+			putc('\r');
+	}
+}
+
+void puthex(unsigned long long val)
+{
+
+	unsigned char buf[10];
+	int i;
+	for (i = 7; i >= 0; i--) {
+		buf[i] = "0123456789ABCDEF"[val & 0x0F];
+		val >>= 4;
+	}
+	buf[8] = '\0';
+	puts(buf);
+}
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
new file mode 100644
index 0000000..67330c2
--- /dev/null
+++ b/arch/mips/boot/compressed/decompress.c
@@ -0,0 +1,126 @@
+/*
+ * Misc. bootloader code for many machines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Matt Porter <mporter@mvista.com> Derived from
+ * arch/ppc/boot/prep/misc.c
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/addrspace.h>
+
+/* These two variables specify the free mem region
+ * that can be used for temporary malloc area
+ */
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+char *zimage_start;
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin, __image_end;
+extern unsigned char __ramdisk_begin, __ramdisk_end;
+unsigned long initrd_size;
+
+/* debug interfaces  */
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+
+void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while (1)
+		;	/* Halt */
+}
+
+/* activate the code for pre-boot environment */
+#define STATIC static
+
+#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	int i;
+	const char *s = src;
+	char *d = dest;
+
+	for (i = 0; i < n; i++)
+		d[i] = s[i];
+	return dest;
+}
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = s;
+
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+	return s;
+}
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+void decompress_kernel(unsigned long boot_heap_start)
+{
+	int zimage_size;
+
+	/*
+	 * We link ourself to an arbitrary low address.  When we run, we
+	 * relocate outself to that address.  __image_beign points to
+	 * the part of the image where the zImage is. -- Tom
+	 */
+	zimage_start = (char *)(unsigned long)(&__image_begin);
+	zimage_size = (unsigned long)(&__image_end) -
+	    (unsigned long)(&__image_begin);
+
+	/*
+	 * The zImage and initrd will be between start and _end, so they've
+	 * already been moved once.  We're good to go now. -- Tom
+	 */
+	puts("zimage at:     ");
+	puthex((unsigned long)zimage_start);
+	puts(" ");
+	puthex((unsigned long)(zimage_size + zimage_start));
+	puts("\n");
+
+	if (initrd_size) {
+		puts("initrd at:     ");
+		puthex((unsigned long)(&__ramdisk_begin));
+		puts(" ");
+		puthex((unsigned long)(&__ramdisk_end));
+		puts("\n");
+	}
+
+	/* this area are prepared for mallocing when decompressing */
+	free_mem_ptr = boot_heap_start;
+	free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
+
+	/* Display standard Linux/MIPS boot prompt for kernel args */
+	puts("Uncompressing Linux at load address ");
+	puthex(VMLINUX_LOAD_ADDRESS_ULL);
+	puts("\n");
+	/* Decompress the kernel with according algorithm */
+	decompress(zimage_start, zimage_size, 0, 0,
+		   (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error);
+	/* FIXME: is there a need to flush cache here? */
+	puts("Now, booting the kernel...\n");
+}
diff --git a/arch/mips/boot/compressed/dummy.c b/arch/mips/boot/compressed/dummy.c
new file mode 100644
index 0000000..31dbf45
--- /dev/null
+++ b/arch/mips/boot/compressed/dummy.c
@@ -0,0 +1,4 @@
+int main(void)
+{
+	return 0;
+}
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
new file mode 100644
index 0000000..4e65a84
--- /dev/null
+++ b/arch/mips/boot/compressed/head.S
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1995 - 1999 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+	.set noreorder
+	.cprestore
+	LEAF(start)
+start:
+	/* Save boot rom start args */
+	move	s0, a0
+	move	s1, a1
+	move	s2, a2
+	move	s3, a3
+
+	/* Clear BSS */
+	PTR_LA	a0, _edata
+	PTR_LA	a2, _end
+1:	sw	zero, 0(a0)
+	bne	a2, a0, 1b
+	 addiu	a0, a0, 4
+
+	PTR_LA	a0, (.heap)          /* heap address */
+	PTR_LA  sp, (.stack + 8192)  /* stack address */
+
+	PTR_LA	ra, 2f
+	PTR_LA	k0, decompress_kernel
+	jr	k0
+	 nop
+2:
+	move	a0, s0
+	move	a1, s1
+	move	a2, s2
+	move	a3, s3
+	PTR_LI	k0, KERNEL_ENTRY
+	jr	k0
+	 nop
+3:
+	b	3b
+	 nop
+	END(start)
+
+	.comm .heap,BOOT_HEAP_SIZE,4
+	.comm .stack,4096*2,4
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
new file mode 100644
index 0000000..29e9f4c
--- /dev/null
+++ b/arch/mips/boot/compressed/ld.script
@@ -0,0 +1,150 @@
+OUTPUT_ARCH(mips)
+ENTRY(start)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .init          : { *(.init)		} =0
+  .text      :
+  {
+    _ftext = . ;
+    *(.text)
+    *(.rodata)
+    *(.rodata1)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  } =0
+  .kstrtab : { *(.kstrtab) }
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  __start___dbe_table = .;	/* Exception table for data bus errors */
+  __dbe_table : { *(__dbe_table) }
+  __stop___dbe_table = .;
+
+  __start___ksymtab = .;	/* Kernel symbol table */
+  __ksymtab : { *(__ksymtab) }
+  __stop___ksymtab = .;
+
+  _etext = .;
+
+  . = ALIGN(8192);
+  .data.init_task : { *(.data.init_task) }
+
+  /* Startup code */
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .setup.init : { *(.setup.init) }
+  __setup_end = .;
+  __initcall_start = .;
+  .initcall.init : { *(.initcall.init) }
+  __initcall_end = .;
+  . = ALIGN(4096);	/* Align double page for init_task_union */
+  __init_end = .;
+
+  . = ALIGN(4096);
+  .data.page_aligned : { *(.data.idt) }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  .fini      : { *(.fini)    } =0
+  .reginfo : { *(.reginfo) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  It would
+     be more correct to do this:
+       . = .;
+     The current expression does not correctly handle the case of a
+     text segment ending precisely at the end of a page; it causes the
+     data segment to skip a page.  The above expression does not have
+     this problem, but it will currently (2/95) cause BFD to allocate
+     a single segment, combining both text and data, for this case.
+     This will prevent the text segment from being shared among
+     multiple executions of the program; I think that is more
+     important than losing a page of the virtual address space (note
+     that no actual memory is lost; the page which is skipped can not
+     be referenced).  */
+  . = .;
+  .data    :
+  {
+    _fdata = . ;
+    *(.data)
+
+   /* Put the compressed image here, so bss is on the end. */
+   __image_begin = .;
+   *(.image)
+   __image_end = .;
+   /* Align the initial ramdisk image (INITRD) on page boundaries. */
+   . = ALIGN(4096);
+   __ramdisk_begin = .;
+   *(.initrd)
+   __ramdisk_end = .;
+   . = ALIGN(4096);
+
+    CONSTRUCTORS
+  }
+  .data1   : { *(.data1) }
+  _gp = . + 0x8000;
+  .lit8 : { *(.lit8) }
+  .lit4 : { *(.lit4) }
+  .ctors         : { *(.ctors)   }
+  .dtors         : { *(.dtors)   }
+  .got           : { *(.got.plt) *(.got) }
+  .dynamic       : { *(.dynamic) }
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata     : { *(.sdata) }
+  . = ALIGN(4);
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __bss_start = .;
+  _fbss = .;
+  .sbss      : { *(.sbss) *(.scommon) }
+  .bss       :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   .  = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+  }
+
+  /* Sections to be discarded */
+  /DISCARD/ :
+  {
+        *(.text.exit)
+        *(.data.exit)
+        *(.exitcall.exit)
+  }
+
+  /* This is the MIPS specific mdebug section.  */
+  .mdebug : { *(.mdebug) }
+  /* These are needed for ELF backends which have not yet been
+     converted to the new style linker.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  /* DWARF debug sections.
+     Symbols in the .debug DWARF section are relative to the beginning of the
+     section so we begin .debug at 0.  It's not clear yet what needs to happen
+     for the others.   */
+  .debug          0 : { *(.debug) }
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  .line           0 : { *(.line) }
+  /* These must appear regardless of  .  */
+  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
+  .comment : { *(.comment) }
+  .note : { *(.note) }
+}
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
new file mode 100644
index 0000000..c9caaf4
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -0,0 +1,43 @@
+/*
+ * 16550 compatible uart based serial debug support for zboot
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+
+#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA)
+#define UART_BASE 0x1fd003f8
+#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
+#endif
+
+#ifdef CONFIG_AR7
+#include <ar7.h>
+#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
+#endif
+
+#ifndef PORT
+#error please define the serial port address for your own machine
+#endif
+
+static inline unsigned int serial_in(int offset)
+{
+	return *((char *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	*((char *)PORT(offset)) = value;
+}
+
+void putc(char c)
+{
+	int timeout = 1024;
+
+	while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
+		;
+
+	serial_out(UART_TX, c);
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 1394362..3e98763 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -9,7 +9,7 @@
 # Copyright (C) 2005-2009 Cavium Networks
 #
 
-obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
+obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c
new file mode 100644
index 0000000..b6df538
--- /dev/null
+++ b/arch/mips/cavium-octeon/cpu.c
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/octeon/octeon.h>
+
+static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
+	void *data)
+{
+	unsigned long flags;
+	unsigned int status;
+
+	switch (action) {
+	case CU2_EXCEPTION:
+		prefetch(&current->thread.cp2);
+		local_irq_save(flags);
+		KSTK_STATUS(current) |= ST0_CU2;
+		status = read_c0_status();
+		write_c0_status(status | ST0_CU2);
+		octeon_cop2_restore(&(current->thread.cp2));
+		write_c0_status(status & ~ST0_CU2);
+		local_irq_restore(flags);
+
+		return NOTIFY_BAD;	/* Don't call default notifier */
+	}
+
+	return NOTIFY_OK;		/* Let default notifier send signals */
+}
+
+static struct notifier_block cnmips_cu2_notifier = {
+	.notifier_call = cnmips_cu2_call,
+};
+
+static int cnmips_cu2_setup(void)
+{
+	return register_cu2_notifier(&cnmips_cu2_notifier);
+}
+early_initcall(cnmips_cu2_setup);
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index be711dd..cfdb4c2 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -159,6 +159,94 @@ out:
 }
 device_initcall(octeon_rng_device_init);
 
+/* Octeon SMI/MDIO interface.  */
+static int __init octeon_mdiobus_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+
+	if (octeon_is_simulation())
+		return 0; /* No mdio in the simulator. */
+
+	/* The bus number is the platform_device id.  */
+	pd = platform_device_alloc("mdio-octeon", 0);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+
+}
+device_initcall(octeon_mdiobus_device_init);
+
+/* Octeon mgmt port Ethernet interface.  */
+static int __init octeon_mgmt_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+	int port, num_ports;
+
+	struct resource mgmt_port_resource = {
+		.flags	= IORESOURCE_IRQ,
+		.start	= -1,
+		.end	= -1
+	};
+
+	if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
+		return 0;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+		num_ports = 1;
+	else
+		num_ports = 2;
+
+	for (port = 0; port < num_ports; port++) {
+		pd = platform_device_alloc("octeon_mgmt", port);
+		if (!pd) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		switch (port) {
+		case 0:
+			mgmt_port_resource.start = OCTEON_IRQ_MII0;
+			break;
+		case 1:
+			mgmt_port_resource.start = OCTEON_IRQ_MII1;
+			break;
+		default:
+			BUG();
+		}
+		mgmt_port_resource.end = mgmt_port_resource.start;
+
+		ret = platform_device_add_resources(pd, &mgmt_port_resource, 1);
+
+		if (ret)
+			goto fail;
+
+		ret = platform_device_add(pd);
+		if (ret)
+			goto fail;
+	}
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+
+}
+device_initcall(octeon_mgmt_device_init);
+
 MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 3564830..5a5b6ba 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 CONFIG_AR7=y
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -265,7 +264,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_PROBE_INITRD_HEADER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -1053,7 +1051,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 94b7d57..267bd46 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 CONFIG_BCM47XX=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1853,7 +1852,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index ea00c18..7fee027 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 CONFIG_BCM63XX=y
 # CONFIG_MIPS_COBALT is not set
@@ -942,7 +941,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 13d9eb4..c2f06e3 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1237,7 +1236,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
 # CONFIG_RUNTIME_DEBUG is not set
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 185df23..72b7e45 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -783,7 +782,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig
index 7afaa28..c8507bc 100644
--- a/arch/mips/configs/cavium-octeon_defconfig
+++ b/arch/mips/configs/cavium-octeon_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -269,7 +268,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -822,7 +820,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 6c8cca8..49e6131 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
@@ -1126,7 +1125,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index dbdf3bb..68e90cd 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index fa68144..9081283 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d73f1de..dabf030 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_MIPS_DB1550 is not set
 CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1172,7 +1171,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=48M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index ec3e028a..a151313 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1390,7 +1389,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 7631dae..6b64339 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
 CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1207,7 +1206,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 9e65e6a..cbb4d86 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MACH_JAZZ is not set
@@ -882,7 +881,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 1bd84d4..52968c4 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -561,7 +560,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
deleted file mode 100644
index 1995d43..0000000
--- a/arch/mips/configs/excite_defconfig
+++ /dev/null
@@ -1,1335 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:31 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-CONFIG_BASLER_EXCITE=y
-# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_COHERENT=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_CPU_RM9K=y
-CONFIG_MIPS_RM9122=y
-CONFIG_SERIAL_RM9000=y
-CONFIG_GPI_RM9000=y
-CONFIG_WDT_RM9000=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_BASLER_EXCITE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WDT_RM9K_GPI=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 0197f0d..a09dd03 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 22:37:00 2009
+# Linux kernel version: 2.6.32-rc4
+# Fri Oct 16 13:18:01 2009
 #
 CONFIG_MIPS=y
 
@@ -10,8 +10,8 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -105,6 +105,8 @@ CONFIG_CPU_LOONGSON2E=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_CPU_LOONGSON2=y
 CONFIG_SYS_HAS_CPU_LOONGSON2E=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
@@ -135,12 +137,16 @@ CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PHYS_ADDR_T_64BIT=y
@@ -148,6 +154,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
@@ -180,6 +187,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-fuloong2e"
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -193,11 +206,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -235,18 +249,16 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -255,8 +267,8 @@ CONFIG_HAVE_SYSCALL_WRAPPERS=y
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -283,7 +295,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -321,9 +333,14 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
 # CONFIG_SUSPEND is not set
-# CONFIG_HIBERNATION is not set
+CONFIG_HIBERNATION_NVS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/hda3"
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
@@ -442,6 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -473,6 +491,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -481,7 +500,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 CONFIG_NET_9P=m
@@ -495,6 +513,7 @@ CONFIG_NET_9P=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -504,9 +523,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -820,6 +839,7 @@ CONFIG_8139TOO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -867,10 +887,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -886,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_CDC_PHONET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -933,12 +951,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -946,6 +968,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1015,6 +1038,7 @@ CONFIG_RTC=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -1070,9 +1094,6 @@ CONFIG_I2C_VIAPRO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1088,7 +1109,6 @@ CONFIG_I2C_VIAPRO=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1105,6 +1125,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -1114,6 +1135,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1198,6 +1220,7 @@ CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1304,7 +1327,6 @@ CONFIG_SND_USB=y
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
 
 #
@@ -1356,6 +1378,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_ISP1760_HCD=m
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1453,6 +1476,7 @@ CONFIG_UIO_CIF=m
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_AEC is not set
 # CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
 
 #
 # TI VLYNQ
@@ -1469,10 +1493,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4DEV_COMPAT=y
 CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_FS_XIP=y
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
@@ -1489,6 +1513,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1557,7 +1582,6 @@ CONFIG_OMFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1666,6 +1690,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1678,13 +1703,14 @@ CONFIG_NOP_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
@@ -1742,11 +1768,13 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f14d38b..222d7ec 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1188,7 +1187,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DYNAMIC_PRINTK_DEBUG=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 1fc73aa..ed84b4c 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -940,7 +939,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 539dccb..dab2e5a 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -816,7 +815,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index d934bde..1841c88 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1126,7 +1125,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index d22df61..14c2ab3 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MACH_JAZZ=y
@@ -1374,7 +1373,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 5380f1f..4d66c44 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -835,7 +834,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index 044074d..08d481e 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -798,7 +797,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
new file mode 100644
index 0000000..b71a0a4
--- /dev/null
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -0,0 +1,1835 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Mon Nov  9 23:42:42 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_LEMOTE_FULOONG2E is not set
+CONFIG_LEMOTE_MACH2F=y
+CONFIG_CS5536=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_LOONGSON2F=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2F=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION_NVS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/hda3"
+# CONFIG_PM_RUNTIME is not set
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_TEXT is not set
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_PRE80211=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_STRADIS is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+CONFIG_FB_SIS=y
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_7x14=y
+CONFIG_FONT_PEARL_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_FONT_SUN8x16=y
+CONFIG_FONT_SUN12x22=y
+CONFIG_FONT_10x18=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=m
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_VME_BUS is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+CONFIG_FB_SM7XX=y
+CONFIG_FB_SM7XX_ACCEL=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3f01870..d3c6012 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1591,7 +1590,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index d001f7e8..6a325c0 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1366,7 +1365,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 7358454..f77a34e 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -635,7 +634,9 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 8c720e5..1720305 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -817,7 +816,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index ecbc030..000d185 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1412,7 +1411,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 9477f04..144b94d 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -3018,7 +3017,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index be8091e..ddf67f6 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1083,7 +1082,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index e74ba79..5ec6083 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1200,7 +1199,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 1d896fd..6647642 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1193,7 +1192,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index fef4d31..848344d5 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1034,7 +1033,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KERNEL_TESTS is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index e10c711..9d721fd 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1215,7 +1214,9 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 5ed3c8d..ab07ec0 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1205,7 +1204,9 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
new file mode 100644
index 0000000..7291633
--- /dev/null
+++ b/arch/mips/configs/powertv_defconfig
@@ -0,0 +1,1550 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug 28 14:49:33 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+CONFIG_POWERTV=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIN_RUNTIME_RESOURCES is not set
+# CONFIG_BOOTLOADER_DRIVER is not set
+CONFIG_BOOTLOADER_FAMILY="R2"
+CONFIG_CSRC_POWERTV=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_HIGHMEM is not set
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+CONFIG_HZ_1000=y
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=1000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_TUNNEL=y
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=y
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=y
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=y
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP210X=y
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index f40c3a0..57a5048 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1204,7 +1203,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 6c6a19a..21c2022 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
@@ -284,7 +283,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -1063,7 +1061,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index e53b8d0..7903628 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1694,7 +1693,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 7f38c0b..7f07bf0 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -961,7 +960,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index b505988..c54d112 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -892,7 +891,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index b06a716..e7c5cd3 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -895,7 +894,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 46512cf..b50032b 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1077,7 +1076,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index b437eb7..c02ba08 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -755,7 +754,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 06acc74..a35bc41 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -887,7 +886,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 69feaf8..e3d68d6 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -824,7 +823,7 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c
index 4ca4eef..5c8603c8 100644
--- a/arch/mips/fw/arc/cmdline.c
+++ b/arch/mips/fw/arc/cmdline.c
@@ -16,11 +16,6 @@
 
 #undef DEBUG_CMDLINE
 
-char * __init prom_getcmdline(void)
-{
-	return arcs_cmdline;
-}
-
 static char *ignored[] = {
 	"ConsoleIn=",
 	"ConsoleOut=",
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index f5dfaf6..09eee09 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -67,9 +67,9 @@
 #define MACH_LEMOTE_ML2F7      3
 #define MACH_LEMOTE_YL2F89     4
 #define MACH_DEXXON_GDIUM2F10  5
-#define MACH_LOONGSON_END      6
-
-#define CL_SIZE			COMMAND_LINE_SIZE
+#define MACH_LEMOTE_NAS        6
+#define MACH_LEMOTE_LL2F       7
+#define MACH_LOONGSON_END      8
 
 extern char *system_type;
 const char *get_system_type(void);
@@ -107,7 +107,7 @@ extern void free_init_pages(const char *what,
 /*
  * Initial kernel command line, usually setup by prom_init()
  */
-extern char arcs_cmdline[CL_SIZE];
+extern char arcs_cmdline[COMMAND_LINE_SIZE];
 
 /*
  * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
new file mode 100644
index 0000000..83894aa
--- /dev/null
+++ b/arch/mips/include/asm/clock.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_MIPS_CLOCK_H
+#define __ASM_MIPS_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+
+extern void (*cpu_wait) (void);
+
+struct clk;
+
+struct clk_ops {
+	void (*init) (struct clk *clk);
+	void (*enable) (struct clk *clk);
+	void (*disable) (struct clk *clk);
+	void (*recalc) (struct clk *clk);
+	int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate) (struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head node;
+	const char *name;
+	int id;
+	struct module *owner;
+
+	struct clk *parent;
+	struct clk_ops *ops;
+
+	struct kref kref;
+
+	unsigned long rate;
+	unsigned long flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+int clk_init(void);
+
+int __clk_enable(struct clk *);
+void __clk_disable(struct clk *);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+#endif				/* __ASM_MIPS_CLOCK_H */
diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
new file mode 100644
index 0000000..6b04c98
--- /dev/null
+++ b/arch/mips/include/asm/cop2.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_COP2_H
+#define __ASM_COP2_H
+
+enum cu2_ops {
+	CU2_EXCEPTION,
+	CU2_LWC2_OP,
+	CU2_LDC2_OP,
+	CU2_SWC2_OP,
+	CU2_SDC2_OP,
+};
+
+extern int register_cu2_notifier(struct notifier_block *nb);
+extern int cu2_notifier_call_chain(unsigned long val, void *v);
+
+#endif /* __ASM_COP2_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 4b96d1a..cf373a9 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -154,6 +154,8 @@
 #define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
 #define PRID_REV_VR4130		0x0080
 #define PRID_REV_34K_V1_0_2	0x0022
+#define PRID_REV_LOONGSON2E	0x0002
+#define PRID_REV_LOONGSON2F	0x0003
 
 /*
  * Older processors used to encode processor version and revision in two
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 8a3ef24..7fcef8e 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -28,15 +28,7 @@
 struct sigcontext;
 struct sigcontext32;
 
-extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
-extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
-
-extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
-extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
-
 extern void fpu_emulator_init_fpu(void);
-extern int fpu_emulator_save_context(struct sigcontext __user *sc);
-extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
 extern void _init_fpu(void);
 extern void _save_fp(struct task_struct *);
 extern void _restore_fp(struct task_struct *);
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index e518957..aecada6 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -25,17 +25,27 @@
 
 #include <asm/break.h>
 #include <asm/inst.h>
+#include <asm/local.h>
+
+#ifdef CONFIG_DEBUG_FS
 
 struct mips_fpu_emulator_stats {
-	unsigned int emulated;
-	unsigned int loads;
-	unsigned int stores;
-	unsigned int cp1ops;
-	unsigned int cp1xops;
-	unsigned int errors;
+	local_t emulated;
+	local_t loads;
+	local_t stores;
+	local_t cp1ops;
+	local_t cp1xops;
+	local_t errors;
 };
 
-extern struct mips_fpu_emulator_stats fpuemustats;
+DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+
+#define MIPS_FPU_EMU_INC_STATS(M)					\
+	cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M))
+
+#else
+#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0)
+#endif /* CONFIG_DEBUG_FS */
 
 extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
 	unsigned long cpc);
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index 40a8c17..3986cd8 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -1 +1,90 @@
-/* empty */
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ *
+ * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#ifndef _ASM_MIPS_FTRACE_H
+#define _ASM_MIPS_FTRACE_H
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR ((unsigned long)(_mcount))
+#define MCOUNT_INSN_SIZE 4		/* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#define mcount _mcount
+
+#define safe_load(load, src, dst, error)		\
+do {							\
+	asm volatile (					\
+		"1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\
+		"   li %[" STR(error) "], 0\n"		\
+		"2:\n"					\
+							\
+		".section .fixup, \"ax\"\n"		\
+		"3: li %[" STR(error) "], 1\n"		\
+		"   j 2b\n"				\
+		".previous\n"				\
+							\
+		".section\t__ex_table,\"a\"\n\t"	\
+		STR(PTR) "\t1b, 3b\n\t"			\
+		".previous\n"				\
+							\
+		: [dst] "=&r" (dst), [error] "=r" (error)\
+		: [src] "r" (src)			\
+		: "memory"				\
+	);						\
+} while (0)
+
+#define safe_store(store, src, dst, error)	\
+do {						\
+	asm volatile (				\
+		"1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\
+		"   li %[" STR(error) "], 0\n"	\
+		"2:\n"				\
+						\
+		".section .fixup, \"ax\"\n"	\
+		"3: li %[" STR(error) "], 1\n"	\
+		"   j 2b\n"			\
+		".previous\n"			\
+						\
+		".section\t__ex_table,\"a\"\n\t"\
+		STR(PTR) "\t1b, 3b\n\t"		\
+		".previous\n"			\
+						\
+		: [error] "=r" (error)		\
+		: [dst] "r" (dst), [src] "r" (src)\
+		: "memory"			\
+	);					\
+} while (0)
+
+#define safe_load_code(dst, src, error) \
+	safe_load(STR(lw), src, dst, error)
+#define safe_store_code(src, dst, error) \
+	safe_store(STR(sw), src, dst, error)
+
+#define safe_load_stack(dst, src, error) \
+	safe_load(STR(PTR_L), src, dst, error)
+
+#define safe_store_stack(src, dst, error) \
+	safe_store(STR(PTR_S), src, dst, error)
+
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+
+#endif /*  CONFIG_DYNAMIC_FTRACE */
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_FUNCTION_TRACER */
+#endif /* _ASM_MIPS_FTRACE_H */
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 09b08d0..0696036 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -113,36 +113,11 @@ do {									\
 
 #endif
 
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- *
- * Ideally there should be away to get this into kernel/irq/handle.c to
- * avoid the overhead of a call for just a tiny function ...
- */
-#define do_IRQ(irq)							\
-do {									\
-	irq_enter();							\
-	__DO_IRQ_SMTC_HOOK(irq);					\
-	generic_handle_irq(irq);					\
-	irq_exit();							\
-} while (0)
+extern void do_IRQ(unsigned int irq);
 
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * To avoid inefficient and in some cases pathological re-checking of
- * IRQ affinity, we have this variant that skips the affinity check.
- */
-
 
-#define do_IRQ_no_affinity(irq)						\
-do {									\
-	irq_enter();							\
-	__NO_AFFINITY_IRQ_SMTC_HOOK(irq);				\
-	generic_handle_irq(irq);					\
-	irq_exit();							\
-} while (0)
+extern void do_IRQ_no_affinity(unsigned int irq);
 
 #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
 
diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
deleted file mode 100644
index 107104c..0000000
--- a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Basler eXcite has an RM9122 processor.
- */
-#define cpu_has_watch		1
-#define cpu_has_mips16		0
-#define cpu_has_divec		0
-#define cpu_has_vce		0
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_prefetch	1
-#define cpu_has_mcheck		0
-#define cpu_has_ejtag		0
-
-#define cpu_has_llsc		1
-#define cpu_has_vtag_icache	0
-#define cpu_has_dc_aliases	0
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_dsp		0
-#define cpu_icache_snoops_remote_store	0
-#define cpu_has_mipsmt		0
-#define cpu_has_userlocal	0
-
-#define cpu_has_nofpuex		0
-#define cpu_has_64bits		1
-
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h
deleted file mode 100644
index 4c29ba4..0000000
--- a/arch/mips/include/asm/mach-excite/excite.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef __EXCITE_H__
-#define __EXCITE_H__
-
-#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/types.h>
-
-#define EXCITE_CPU_EXT_CLOCK 100000000
-
-#if !defined(__ASSEMBLY__)
-void __init excite_kgdb_init(void);
-void excite_procfs_init(void);
-extern unsigned long memsize;
-extern char modetty[];
-extern u32 unit_id;
-#endif
-
-/* Base name for XICAP devices */
-#define XICAP_NAME	"xicap_gpi"
-
-/* OCD register offsets */
-#define LKB0		0x0038
-#define LKB5		0x0128
-#define LKM5		0x012C
-#define LKB7		0x0138
-#define LKM7		0x013c
-#define LKB8		0x0140
-#define LKM8		0x0144
-#define LKB9		0x0148
-#define LKM9		0x014c
-#define LKB10		0x0150
-#define LKM10		0x0154
-#define LKB11		0x0158
-#define LKM11		0x015c
-#define LKB12		0x0160
-#define LKM12		0x0164
-#define LKB13		0x0168
-#define LKM13		0x016c
-#define LDP0		0x0200
-#define LDP1		0x0210
-#define LDP2		0x0220
-#define LDP3		0x0230
-#define INTPIN0		0x0A40
-#define INTPIN1		0x0A44
-#define INTPIN2		0x0A48
-#define INTPIN3		0x0A4C
-#define INTPIN4		0x0A50
-#define INTPIN5		0x0A54
-#define INTPIN6		0x0A58
-#define INTPIN7		0x0A5C
-
-
-
-
-/* TITAN register offsets */
-#define CPRR		0x0004
-#define CPDSR		0x0008
-#define CPTC0R		0x000c
-#define CPTC1R		0x0010
-#define CPCFG0		0x0020
-#define CPCFG1		0x0024
-#define CPDST0A		0x0028
-#define CPDST0B		0x002c
-#define CPDST1A		0x0030
-#define CPDST1B		0x0034
-#define CPXDSTA		0x0038
-#define CPXDSTB		0x003c
-#define CPXCISRA	0x0048
-#define CPXCISRB	0x004c
-#define CPGIG0ER	0x0050
-#define CPGIG1ER	0x0054
-#define CPGRWL		0x0068
-#define CPURSLMT	0x00f8
-#define UACFG		0x0200
-#define UAINTS		0x0204
-#define SDRXFCIE	0x4828
-#define SDTXFCIE	0x4928
-#define INTP0Status0	0x1B00
-#define INTP0Mask0	0x1B04
-#define INTP0Set0	0x1B08
-#define INTP0Clear0	0x1B0C
-#define GXCFG		0x5000
-#define GXDMADRPFX	0x5018
-#define GXDMA_DESCADR	0x501c
-#define GXCH0TDESSTRT	0x5054
-
-/* IRQ definitions */
-#define NMICONFIG		0xac0
-#define TITAN_MSGINT	0xc4
-#define TITAN_IRQ	((TITAN_MSGINT / 0x20) + 2)
-#define FPGA0_MSGINT	0x5a
-#define FPGA0_IRQ	((FPGA0_MSGINT / 0x20) + 2)
-#define FPGA1_MSGINT	0x7b
-#define FPGA1_IRQ	((FPGA1_MSGINT / 0x20) + 2)
-#define PHY_MSGINT	0x9c
-#define PHY_IRQ		((PHY_MSGINT   / 0x20) + 2)
-
-#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
-/* Pre-release units used interrupt pin #9 */
-#define USB_IRQ		11
-#else
-/* Re-designed units use interrupt pin #1 */
-#define USB_MSGINT	0x39
-#define USB_IRQ		((USB_MSGINT / 0x20) + 2)
-#endif
-#define TIMER_IRQ	12
-
-
-/* Device address ranges */
-#define EXCITE_OFFS_OCD		0x1fffc000
-#define	EXCITE_SIZE_OCD		(16 * 1024)
-#define EXCITE_PHYS_OCD		CPHYSADDR(EXCITE_OFFS_OCD)
-#define EXCITE_ADDR_OCD		CKSEG1ADDR(EXCITE_OFFS_OCD)
-
-#define EXCITE_OFFS_SCRAM 	0x1fffa000
-#define	EXCITE_SIZE_SCRAM	(8 << 10)
-#define EXCITE_PHYS_SCRAM 	CPHYSADDR(EXCITE_OFFS_SCRAM)
-#define EXCITE_ADDR_SCRAM 	CKSEG1ADDR(EXCITE_OFFS_SCRAM)
-
-#define EXCITE_OFFS_PCI_IO	0x1fff8000
-#define	EXCITE_SIZE_PCI_IO	(8 << 10)
-#define EXCITE_PHYS_PCI_IO	CPHYSADDR(EXCITE_OFFS_PCI_IO)
-#define EXCITE_ADDR_PCI_IO 	CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
-
-#define EXCITE_OFFS_TITAN	0x1fff0000
-#define EXCITE_SIZE_TITAN	(32 << 10)
-#define EXCITE_PHYS_TITAN	CPHYSADDR(EXCITE_OFFS_TITAN)
-#define EXCITE_ADDR_TITAN	CKSEG1ADDR(EXCITE_OFFS_TITAN)
-
-#define EXCITE_OFFS_PCI_MEM	0x1ffe0000
-#define EXCITE_SIZE_PCI_MEM	(64 << 10)
-#define EXCITE_PHYS_PCI_MEM	CPHYSADDR(EXCITE_OFFS_PCI_MEM)
-#define EXCITE_ADDR_PCI_MEM	CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
-
-#define EXCITE_OFFS_FPGA	0x1ffdc000
-#define EXCITE_SIZE_FPGA	(16 << 10)
-#define EXCITE_PHYS_FPGA	CPHYSADDR(EXCITE_OFFS_FPGA)
-#define EXCITE_ADDR_FPGA	CKSEG1ADDR(EXCITE_OFFS_FPGA)
-
-#define EXCITE_OFFS_NAND	0x1ffd8000
-#define EXCITE_SIZE_NAND	(16 << 10)
-#define EXCITE_PHYS_NAND	CPHYSADDR(EXCITE_OFFS_NAND)
-#define EXCITE_ADDR_NAND	CKSEG1ADDR(EXCITE_OFFS_NAND)
-
-#define EXCITE_OFFS_BOOTROM	0x1f000000
-#define EXCITE_SIZE_BOOTROM	(8 << 20)
-#define EXCITE_PHYS_BOOTROM	CPHYSADDR(EXCITE_OFFS_BOOTROM)
-#define EXCITE_ADDR_BOOTROM	CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
-
-/* FPGA address offsets */
-#define EXCITE_FPGA_DPR		0x0104	/* dual-ported ram */
-#define EXCITE_FPGA_SYSCTL	0x0200	/* system control register block */
-
-#endif /* __EXCITE_H__ */
diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h
deleted file mode 100644
index 0a1ef69..0000000
--- a/arch/mips/include/asm/mach-excite/excite_fpga.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef EXCITE_FPGA_H_INCLUDED
-#define EXCITE_FPGA_H_INCLUDED
-
-
-/**
- * Address alignment of the individual FPGA bytes.
- * The address arrangement of the individual bytes of the FPGA is two
- * byte aligned at the embedded MK2 platform.
- */
-#ifdef EXCITE_CCI_FPGA_MK2
-typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
-#else
-typedef unsigned char excite_cci_fpga_align_t;
-#endif
-
-
-/**
- * Size of Dual Ported RAM.
- */
-#define EXCITE_DPR_SIZE 263
-
-
-/**
- * Size of Reserved Status Fields in Dual Ported RAM.
- */
-#define EXCITE_DPR_STATUS_SIZE 7
-
-
-
-/**
- * FPGA.
- * Hardware register layout of the FPGA interface. The FPGA must accessed
- * byte wise solely.
- * @see EXCITE_CCI_DPR_MK2
- */
-typedef struct excite_fpga {
-
-	/**
-	 * Dual Ported RAM.
-	 */
-	excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
-
-	/**
-	 * Status.
-	 */
-	excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
-
-#ifdef EXCITE_CCI_FPGA_MK2
-	/**
-	 * RM9000 Interrupt.
-	 * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
-	 */
-	excite_cci_fpga_align_t rm9k_int;
-#else
-	/**
-	 * MK2 Interrupt.
-	 * Write access initiates interrupt at the ARM processor of the MK2.
-	 */
-	excite_cci_fpga_align_t mk2_int;
-
-	excite_cci_fpga_align_t gap[0x1000-0x10f];
-
-	/**
-	 * IRQ Source/Acknowledge.
-	 */
-	excite_cci_fpga_align_t rm9k_irq_src;
-
-	/**
-	 * IRQ Mask.
-	 * Set bits enable the related interrupt.
-	 */
-	excite_cci_fpga_align_t rm9k_irq_mask;
-#endif
-
-
-} excite_fpga;
-
-
-
-#endif	/* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h
deleted file mode 100644
index c4cf614..0000000
--- a/arch/mips/include/asm/mach-excite/excite_nandflash.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __EXCITE_NANDFLASH_H__
-#define __EXCITE_NANDFLASH_H__
-
-/* Resource names */
-#define EXCITE_NANDFLASH_RESOURCE_REGS	"excite_nandflash_regs"
-
-#endif /* __EXCITE_NANDFLASH_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h
deleted file mode 100644
index 94705a4..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_eth.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#if !defined(__RM9K_ETH_H__)
-#define __RM9K_ETH_H__
-
-#define RM9K_GE_NAME			"rm9k_ge"
-
-/* Resource names */
-#define RM9K_GE_RESOURCE_MAC      	"rm9k_ge_mac"
-#define RM9K_GE_RESOURCE_MSTAT      	"rm9k_ge_mstat"
-#define RM9K_GE_RESOURCE_PKTPROC	"rm9k_ge_pktproc"
-#define RM9K_GE_RESOURCE_XDMA		"rm9k_ge_xdma"
-#define RM9K_GE_RESOURCE_FIFO_RX  	"rm9k_ge_fifo_rx"
-#define RM9K_GE_RESOURCE_FIFO_TX  	"rm9k_ge_fifo_tx"
-#define RM9K_GE_RESOURCE_FIFOMEM_RX  	"rm9k_ge_fifo_memory_rx"
-#define RM9K_GE_RESOURCE_FIFOMEM_TX  	"rm9k_ge_fifo_memory_tx"
-#define RM9K_GE_RESOURCE_PHY      	"rm9k_ge_phy"
-#define RM9K_GE_RESOURCE_DMADESC_RX  	"rm9k_ge_dmadesc_rx"
-#define RM9K_GE_RESOURCE_DMADESC_TX  	"rm9k_ge_dmadesc_tx"
-#define RM9K_GE_RESOURCE_IRQ_MAIN	"rm9k_ge_irq_main"
-#define RM9K_GE_RESOURCE_IRQ_PHY	"rm9k_ge_irq_phy"
-#define RM9K_GE_RESOURCE_GPI_SLICE	"rm9k_ge_gpi_slice"
-#define RM9K_GE_RESOURCE_MDIO_CHANNEL	"rm9k_ge_mdio_channel"
-
-#endif /* !defined(__RM9K_ETH_H__) */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
deleted file mode 100644
index 3fa3c08..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_wdt.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __RM9K_WDT_H__
-#define __RM9K_WDT_H__
-
-/* Device name */
-#define WDT_NAME		"wdt_gpi"
-
-/* Resource names */
-#define WDT_RESOURCE_REGS	"excite_watchdog_regs"
-#define WDT_RESOURCE_IRQ	"excite_watchdog_irq"
-#define WDT_RESOURCE_COUNTER	"excite_watchdog_counter"
-
-#endif /* __RM9K_WDT_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
deleted file mode 100644
index 0095777..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_xicap.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __EXCITE_XICAP_H__
-#define __EXCITE_XICAP_H__
-
-
-/* Resource names */
-#define XICAP_RESOURCE_FIFO_RX		"xicap_fifo_rx"
-#define XICAP_RESOURCE_FIFO_TX		"xicap_fifo_tx"
-#define XICAP_RESOURCE_XDMA 		"xicap_xdma"
-#define XICAP_RESOURCE_DMADESC		"xicap_dmadesc"
-#define XICAP_RESOURCE_PKTPROC  	"xicap_pktproc"
-#define XICAP_RESOURCE_IRQ		"xicap_irq"
-#define XICAP_RESOURCE_GPI_SLICE	"xicap_gpi_slice"
-#define XICAP_RESOURCE_FIFO_BLK		"xicap_fifo_blocks"
-#define XICAP_RESOURCE_PKT_STREAM	"xicap_pkt_stream"
-
-#endif /* __EXCITE_XICAP_H__ */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
new file mode 100644
index 0000000..021f77c
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
@@ -0,0 +1,305 @@
+/*
+ * The header file of cs5536 sourth bridge.
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu <liujl@lemote.com>
+ */
+
+#ifndef	_CS5536_H
+#define	_CS5536_H
+
+#include <linux/types.h>
+
+extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
+extern void _wrmsr(u32 msr, u32 hi, u32 lo);
+
+/*
+ * MSR module base
+ */
+#define	CS5536_SB_MSR_BASE	(0x00000000)
+#define	CS5536_GLIU_MSR_BASE	(0x10000000)
+#define	CS5536_ILLEGAL_MSR_BASE	(0x20000000)
+#define	CS5536_USB_MSR_BASE	(0x40000000)
+#define	CS5536_IDE_MSR_BASE	(0x60000000)
+#define	CS5536_DIVIL_MSR_BASE	(0x80000000)
+#define	CS5536_ACC_MSR_BASE	(0xa0000000)
+#define	CS5536_UNUSED_MSR_BASE	(0xc0000000)
+#define	CS5536_GLCP_MSR_BASE	(0xe0000000)
+
+#define	SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
+#define	GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
+#define	ILLEGAL_MSR_REG(offset)	(CS5536_ILLEGAL_MSR_BASE | (offset))
+#define	USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
+#define	IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
+#define	DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
+#define	ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
+#define	UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE	| (offset))
+#define	GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
+
+/*
+ * BAR SPACE OF VIRTUAL PCI :
+ * range for pci probe use, length is the actual size.
+ */
+/* IO space for all DIVIL modules */
+#define	CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
+#define	CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
+#define	CS5536_SMB_RANGE	0xfffffff8
+#define	CS5536_SMB_LENGTH	0x08
+#define	CS5536_GPIO_RANGE	0xffffff00
+#define	CS5536_GPIO_LENGTH	0x100
+#define	CS5536_MFGPT_RANGE	0xffffffc0
+#define	CS5536_MFGPT_LENGTH	0x40
+#define	CS5536_ACPI_RANGE	0xffffffe0
+#define	CS5536_ACPI_LENGTH	0x20
+#define	CS5536_PMS_RANGE	0xffffff80
+#define	CS5536_PMS_LENGTH	0x80
+/* IO space for IDE */
+#define	CS5536_IDE_RANGE	0xfffffff0
+#define	CS5536_IDE_LENGTH	0x10
+/* IO space for ACC */
+#define	CS5536_ACC_RANGE	0xffffff80
+#define	CS5536_ACC_LENGTH	0x80
+/* MEM space for ALL USB modules */
+#define	CS5536_OHCI_RANGE	0xfffff000
+#define	CS5536_OHCI_LENGTH	0x1000
+#define	CS5536_EHCI_RANGE	0xfffff000
+#define	CS5536_EHCI_LENGTH	0x1000
+
+/*
+ * PCI MSR ACCESS
+ */
+#define	PCI_MSR_CTRL		0xF0
+#define	PCI_MSR_ADDR		0xF4
+#define	PCI_MSR_DATA_LO		0xF8
+#define	PCI_MSR_DATA_HI		0xFC
+
+/**************** MSR *****************************/
+
+/*
+ * GLIU STANDARD MSR
+ */
+#define	GLIU_CAP		0x00
+#define	GLIU_CONFIG		0x01
+#define	GLIU_SMI		0x02
+#define	GLIU_ERROR		0x03
+#define	GLIU_PM			0x04
+#define	GLIU_DIAG		0x05
+
+/*
+ * GLIU SPEC. MSR
+ */
+#define	GLIU_P2D_BM0		0x20
+#define	GLIU_P2D_BM1		0x21
+#define	GLIU_P2D_BM2		0x22
+#define	GLIU_P2D_BMK0		0x23
+#define	GLIU_P2D_BMK1		0x24
+#define	GLIU_P2D_BM3		0x25
+#define	GLIU_P2D_BM4		0x26
+#define	GLIU_COH		0x80
+#define	GLIU_PAE		0x81
+#define	GLIU_ARB		0x82
+#define	GLIU_ASMI		0x83
+#define	GLIU_AERR		0x84
+#define	GLIU_DEBUG		0x85
+#define	GLIU_PHY_CAP		0x86
+#define	GLIU_NOUT_RESP		0x87
+#define	GLIU_NOUT_WDATA		0x88
+#define	GLIU_WHOAMI		0x8B
+#define	GLIU_SLV_DIS		0x8C
+#define	GLIU_IOD_BM0		0xE0
+#define	GLIU_IOD_BM1		0xE1
+#define	GLIU_IOD_BM2		0xE2
+#define	GLIU_IOD_BM3		0xE3
+#define	GLIU_IOD_BM4		0xE4
+#define	GLIU_IOD_BM5		0xE5
+#define	GLIU_IOD_BM6		0xE6
+#define	GLIU_IOD_BM7		0xE7
+#define	GLIU_IOD_BM8		0xE8
+#define	GLIU_IOD_BM9		0xE9
+#define	GLIU_IOD_SC0		0xEA
+#define	GLIU_IOD_SC1		0xEB
+#define	GLIU_IOD_SC2		0xEC
+#define	GLIU_IOD_SC3		0xED
+#define	GLIU_IOD_SC4		0xEE
+#define	GLIU_IOD_SC5		0xEF
+#define	GLIU_IOD_SC6		0xF0
+#define	GLIU_IOD_SC7		0xF1
+
+/*
+ * SB STANDARD
+ */
+#define	SB_CAP		0x00
+#define	SB_CONFIG	0x01
+#define	SB_SMI		0x02
+#define	SB_ERROR	0x03
+#define	SB_MAR_ERR_EN		0x00000001
+#define	SB_TAR_ERR_EN		0x00000002
+#define	SB_RSVD_BIT1		0x00000004
+#define	SB_EXCEP_ERR_EN		0x00000008
+#define	SB_SYSE_ERR_EN		0x00000010
+#define	SB_PARE_ERR_EN		0x00000020
+#define	SB_TAS_ERR_EN		0x00000040
+#define	SB_MAR_ERR_FLAG		0x00010000
+#define	SB_TAR_ERR_FLAG		0x00020000
+#define	SB_RSVD_BIT2		0x00040000
+#define	SB_EXCEP_ERR_FLAG	0x00080000
+#define	SB_SYSE_ERR_FLAG	0x00100000
+#define	SB_PARE_ERR_FLAG	0x00200000
+#define	SB_TAS_ERR_FLAG		0x00400000
+#define	SB_PM		0x04
+#define	SB_DIAG		0x05
+
+/*
+ * SB SPEC.
+ */
+#define	SB_CTRL		0x10
+#define	SB_R0		0x20
+#define	SB_R1		0x21
+#define	SB_R2		0x22
+#define	SB_R3		0x23
+#define	SB_R4		0x24
+#define	SB_R5		0x25
+#define	SB_R6		0x26
+#define	SB_R7		0x27
+#define	SB_R8		0x28
+#define	SB_R9		0x29
+#define	SB_R10		0x2A
+#define	SB_R11		0x2B
+#define	SB_R12		0x2C
+#define	SB_R13		0x2D
+#define	SB_R14		0x2E
+#define	SB_R15		0x2F
+
+/*
+ * GLCP STANDARD
+ */
+#define	GLCP_CAP		0x00
+#define	GLCP_CONFIG		0x01
+#define	GLCP_SMI		0x02
+#define	GLCP_ERROR		0x03
+#define	GLCP_PM			0x04
+#define	GLCP_DIAG		0x05
+
+/*
+ * GLCP SPEC.
+ */
+#define	GLCP_CLK_DIS_DELAY	0x08
+#define	GLCP_PM_CLK_DISABLE	0x09
+#define	GLCP_GLB_PM		0x0B
+#define	GLCP_DBG_OUT		0x0C
+#define	GLCP_RSVD1		0x0D
+#define	GLCP_SOFT_COM		0x0E
+#define	SOFT_BAR_SMB_FLAG	0x00000001
+#define	SOFT_BAR_GPIO_FLAG	0x00000002
+#define	SOFT_BAR_MFGPT_FLAG	0x00000004
+#define	SOFT_BAR_IRQ_FLAG	0x00000008
+#define	SOFT_BAR_PMS_FLAG	0x00000010
+#define	SOFT_BAR_ACPI_FLAG	0x00000020
+#define	SOFT_BAR_IDE_FLAG	0x00000400
+#define	SOFT_BAR_ACC_FLAG	0x00000800
+#define	SOFT_BAR_OHCI_FLAG	0x00001000
+#define	SOFT_BAR_EHCI_FLAG	0x00002000
+#define	GLCP_RSVD2		0x0F
+#define	GLCP_CLK_OFF		0x10
+#define	GLCP_CLK_ACTIVE		0x11
+#define	GLCP_CLK_DISABLE	0x12
+#define	GLCP_CLK4ACK		0x13
+#define	GLCP_SYS_RST		0x14
+#define	GLCP_RSVD3		0x15
+#define	GLCP_DBG_CLK_CTRL	0x16
+#define	GLCP_CHIP_REV_ID	0x17
+
+/* PIC */
+#define	PIC_YSEL_LOW		0x20
+#define	PIC_YSEL_LOW_USB_SHIFT		8
+#define	PIC_YSEL_LOW_ACC_SHIFT		16
+#define	PIC_YSEL_LOW_FLASH_SHIFT	24
+#define	PIC_YSEL_HIGH		0x21
+#define	PIC_ZSEL_LOW		0x22
+#define	PIC_ZSEL_HIGH		0x23
+#define	PIC_IRQM_PRIM		0x24
+#define	PIC_IRQM_LPC		0x25
+#define	PIC_XIRR_STS_LOW	0x26
+#define	PIC_XIRR_STS_HIGH	0x27
+#define	PCI_SHDW		0x34
+
+/*
+ * DIVIL STANDARD
+ */
+#define	DIVIL_CAP		0x00
+#define	DIVIL_CONFIG		0x01
+#define	DIVIL_SMI		0x02
+#define	DIVIL_ERROR		0x03
+#define	DIVIL_PM		0x04
+#define	DIVIL_DIAG		0x05
+
+/*
+ * DIVIL SPEC.
+ */
+#define	DIVIL_LBAR_IRQ		0x08
+#define	DIVIL_LBAR_KEL		0x09
+#define	DIVIL_LBAR_SMB		0x0B
+#define	DIVIL_LBAR_GPIO		0x0C
+#define	DIVIL_LBAR_MFGPT	0x0D
+#define	DIVIL_LBAR_ACPI		0x0E
+#define	DIVIL_LBAR_PMS		0x0F
+#define	DIVIL_LEG_IO		0x14
+#define	DIVIL_BALL_OPTS		0x15
+#define	DIVIL_SOFT_IRQ		0x16
+#define	DIVIL_SOFT_RESET	0x17
+
+/* MFGPT */
+#define MFGPT_IRQ	0x28
+
+/*
+ * IDE STANDARD
+ */
+#define	IDE_CAP		0x00
+#define	IDE_CONFIG	0x01
+#define	IDE_SMI		0x02
+#define	IDE_ERROR	0x03
+#define	IDE_PM		0x04
+#define	IDE_DIAG	0x05
+
+/*
+ * IDE SPEC.
+ */
+#define	IDE_IO_BAR	0x08
+#define	IDE_CFG		0x10
+#define	IDE_DTC		0x12
+#define	IDE_CAST	0x13
+#define	IDE_ETC		0x14
+#define	IDE_INTERNAL_PM	0x15
+
+/*
+ * ACC STANDARD
+ */
+#define	ACC_CAP		0x00
+#define	ACC_CONFIG	0x01
+#define	ACC_SMI		0x02
+#define	ACC_ERROR	0x03
+#define	ACC_PM		0x04
+#define	ACC_DIAG	0x05
+
+/*
+ * USB STANDARD
+ */
+#define	USB_CAP		0x00
+#define	USB_CONFIG	0x01
+#define	USB_SMI		0x02
+#define	USB_ERROR	0x03
+#define	USB_PM		0x04
+#define	USB_DIAG	0x05
+
+/*
+ * USB SPEC.
+ */
+#define	USB_OHCI	0x08
+#define	USB_EHCI	0x09
+
+/****************** NATIVE ***************************/
+/* GPIO : I/O SPACE; REG : 32BITS */
+#define	GPIOL_OUT_VAL		0x00
+#define	GPIOL_OUT_EN		0x04
+
+#endif				/* _CS5536_H */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
new file mode 100644
index 0000000..4b493d6
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
@@ -0,0 +1,35 @@
+/*
+ * cs5536 mfgpt header file
+ */
+
+#ifndef _CS5536_MFGPT_H
+#define _CS5536_MFGPT_H
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+#ifdef CONFIG_CS5536_MFGPT
+extern void setup_mfgpt0_timer(void);
+extern void disable_mfgpt0_counter(void);
+extern void enable_mfgpt0_counter(void);
+#else
+static inline void __maybe_unused setup_mfgpt0_timer(void)
+{
+}
+static inline void __maybe_unused disable_mfgpt0_counter(void)
+{
+}
+static inline void __maybe_unused enable_mfgpt0_counter(void)
+{
+}
+#endif
+
+#define MFGPT_TICK_RATE 14318000
+#define COMPARE  ((MFGPT_TICK_RATE + HZ/2) / HZ)
+
+#define MFGPT_BASE	mfgpt_base
+#define MFGPT0_CMP2	(MFGPT_BASE + 2)
+#define MFGPT0_CNT	(MFGPT_BASE + 4)
+#define MFGPT0_SETUP	(MFGPT_BASE + 6)
+
+#endif /*!_CS5536_MFGPT_H */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
new file mode 100644
index 0000000..0dca9c8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
@@ -0,0 +1,153 @@
+/*
+ * the definition file of cs5536 Virtual Support Module(VSM).
+ * pci configuration space can be accessed through the VSM, so
+ * there is no need of the MSR read/write now, except the spec.
+ * MSR registers which are not implemented yet.
+ *
+ * Copyright (C) 2007 Lemote Inc.
+ * Author : jlliu, liujl@lemote.com
+ */
+
+#ifndef	_CS5536_PCI_H
+#define	_CS5536_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
+extern u32 cs5536_pci_conf_read4(int function, int reg);
+
+#define	CS5536_ACC_INTR		9
+#define	CS5536_IDE_INTR		14
+#define	CS5536_USB_INTR		11
+#define	CS5536_MFGPT_INTR	5
+#define	CS5536_UART1_INTR	4
+#define	CS5536_UART2_INTR	3
+
+/************** PCI BUS DEVICE FUNCTION ***************/
+
+/*
+ * PCI bus device function
+ */
+#define	PCI_BUS_CS5536		0
+#define	PCI_IDSEL_CS5536	14
+
+/********** STANDARD PCI-2.2 EXPANSION ****************/
+
+/*
+ * PCI configuration space
+ * we have to virtualize the PCI configure space head, so we should
+ * define the necessary IDs and some others.
+ */
+
+/* CONFIG of PCI VENDOR ID*/
+#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
+	(((mod_dev_id) << 16) | (sys_vendor_id))
+
+/* VENDOR ID */
+#define	CS5536_VENDOR_ID	0x1022
+
+/* DEVICE ID */
+#define	CS5536_ISA_DEVICE_ID		0x2090
+#define	CS5536_IDE_DEVICE_ID		0x209a
+#define	CS5536_ACC_DEVICE_ID		0x2093
+#define	CS5536_OHCI_DEVICE_ID		0x2094
+#define	CS5536_EHCI_DEVICE_ID		0x2095
+
+/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
+#define	CS5536_ISA_CLASS_CODE		0x060100
+#define CS5536_IDE_CLASS_CODE		0x010180
+#define	CS5536_ACC_CLASS_CODE		0x040100
+#define	CS5536_OHCI_CLASS_CODE		0x0C0310
+#define	CS5536_EHCI_CLASS_CODE		0x0C0320
+
+/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
+
+#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer)	\
+	((PCI_NONE_BIST << 24) | ((header_type) << 16) \
+		| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
+
+#define	PCI_NONE_BIST			0x00	/* RO not implemented yet. */
+#define	PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
+#define	PCI_NORMAL_HEADER_TYPE		0x00
+#define	PCI_NORMAL_LATENCY_TIMER	0x00
+#define	PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
+
+/* BAR */
+#define	PCI_BAR0_REG			0x10
+#define	PCI_BAR1_REG			0x14
+#define	PCI_BAR2_REG			0x18
+#define	PCI_BAR3_REG			0x1c
+#define	PCI_BAR4_REG			0x20
+#define	PCI_BAR5_REG			0x24
+#define	PCI_BAR_COUNT			6
+#define	PCI_BAR_RANGE_MASK		0xFFFFFFFF
+
+/* CARDBUS CIS POINTER */
+#define	PCI_CARDBUS_CIS_POINTER		0x00000000
+
+/* SUBSYSTEM VENDOR ID  */
+#define	CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
+
+/* SUBSYSTEM ID */
+#define	CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
+#define	CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
+#define	CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
+#define	CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
+#define	CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
+
+/* EXPANSION ROM BAR */
+#define	PCI_EXPANSION_ROM_BAR		0x00000000
+
+/* CAPABILITIES POINTER */
+#define	PCI_CAPLIST_POINTER		0x00000000
+#define PCI_CAPLIST_USB_POINTER		0x40
+/* INTERRUPT */
+
+#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
+	((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
+		((pin) << 8) | (mod_intr))
+
+#define	PCI_MAX_LATENCY			0x40
+#define	PCI_MIN_GRANT			0x00
+#define	PCI_DEFAULT_PIN			0x01
+
+/*********** EXPANSION PCI REG ************************/
+
+/*
+ * ISA EXPANSION
+ */
+#define	PCI_UART1_INT_REG 	0x50
+#define PCI_UART2_INT_REG	0x54
+#define	PCI_ISA_FIXUP_REG	0x58
+
+/*
+ * IDE EXPANSION
+ */
+#define	PCI_IDE_CFG_REG		0x40
+#define	CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
+#define	PCI_IDE_DTC_REG		0x48
+#define	PCI_IDE_CAST_REG	0x4C
+#define	PCI_IDE_ETC_REG		0x50
+#define	PCI_IDE_PM_REG		0x54
+#define	PCI_IDE_INT_REG		0x60
+
+/*
+ * ACC EXPANSION
+ */
+#define	PCI_ACC_INT_REG		0x50
+
+/*
+ * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
+ */
+#define	PCI_OHCI_PM_REG		0x40
+#define	PCI_OHCI_INT_REG	0x50
+
+/*
+ * EHCI EXPANSION
+ */
+#define	PCI_EHCI_LEGSMIEN_REG	0x50
+#define	PCI_EHCI_LEGSMISTS_REG	0x54
+#define	PCI_EHCI_FLADJ_REG	0x60
+
+#endif				/* _CS5536_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
new file mode 100644
index 0000000..6305bea
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
@@ -0,0 +1,31 @@
+/*
+ * the read/write interfaces for Virtual Support Module(VSM)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#ifndef	_CS5536_VSM_H
+#define	_CS5536_VSM_H
+
+#include <linux/types.h>
+
+typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
+typedef u32 (*cs5536_pci_vsm_read)(int reg);
+
+#define DECLARE_CS5536_MODULE(name) \
+extern void pci_##name##_write_reg(int reg, u32 value); \
+extern u32 pci_##name##_read_reg(int reg);
+
+/* ide module */
+DECLARE_CS5536_MODULE(ide)
+/* acc module */
+DECLARE_CS5536_MODULE(acc)
+/* ohci module */
+DECLARE_CS5536_MODULE(ohci)
+/* isa module */
+DECLARE_CS5536_MODULE(isa)
+/* ehci module */
+DECLARE_CS5536_MODULE(ehci)
+
+#endif				/* _CS5536_VSM_H */
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index 71a6851..981c75f 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
+#else
 	return dma_addr & 0x7fffffff;
+#endif
 }
 
 static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index da70bcf..ee8bc83 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -15,9 +15,6 @@
 #include <linux/io.h>
 #include <linux/init.h>
 
-/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
-#include <asm/mips-boards/bonito64.h>
-
 /* loongson internal northbridge initialization */
 extern void bonito_irq_init(void);
 
@@ -32,7 +29,19 @@ extern unsigned long memsize, highmemsize;
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);
 extern void __init prom_init_cmdline(void);
+extern void __init prom_init_machtype(void);
 extern void __init prom_init_env(void);
+#ifdef CONFIG_LOONGSON_UART_BASE
+extern unsigned long _loongson_uart_base, loongson_uart_base;
+extern void prom_init_loongson_uart_base(void);
+#endif
+
+static inline void prom_init_uart_base(void)
+{
+#ifdef CONFIG_LOONGSON_UART_BASE
+	prom_init_loongson_uart_base();
+#endif
+}
 
 /* irq operation functions */
 extern void bonito_irqdispatch(void);
@@ -40,25 +49,276 @@ extern void __init bonito_irq_init(void);
 extern void __init set_irq_trigger_mode(void);
 extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
+extern int mach_i8259_irq(void);
+
+/* We need this in some places... */
+#define delay()	({		\
+	int x;				\
+	for (x = 0; x < 100000; x++)	\
+		__asm__ __volatile__(""); \
+})
+
+#define LOONGSON_REG(x) \
+	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+
+#define LOONGSON_IRQ_BASE	32
+#define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+
+#define LOONGSON_FLASH_BASE	0x1c000000
+#define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
+#define LOONGSON_FLASH_TOP	(LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
+
+#define LOONGSON_LIO0_BASE	0x1e000000
+#define LOONGSON_LIO0_SIZE	0x01C00000	/* 28M */
+#define LOONGSON_LIO0_TOP	(LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
+
+#define LOONGSON_BOOT_BASE	0x1fc00000
+#define LOONGSON_BOOT_SIZE	0x00100000	/* 1M */
+#define LOONGSON_BOOT_TOP 	(LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE 	0x1fe00000
+#define LOONGSON_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+
+#define LOONGSON_LIO1_BASE 	0x1ff00000
+#define LOONGSON_LIO1_SIZE 	0x00100000	/* 1M */
+#define LOONGSON_LIO1_TOP	(LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
+
+#define LOONGSON_PCILO0_BASE	0x10000000
+#define LOONGSON_PCILO1_BASE	0x14000000
+#define LOONGSON_PCILO2_BASE	0x18000000
+#define LOONGSON_PCILO_BASE	LOONGSON_PCILO0_BASE
+#define LOONGSON_PCILO_SIZE	0x0c000000	/* 64M * 3 */
+#define LOONGSON_PCILO_TOP	(LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
+
+#define LOONGSON_PCICFG_BASE	0x1fe80000
+#define LOONGSON_PCICFG_SIZE	0x00000800	/* 2K */
+#define LOONGSON_PCICFG_TOP	(LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+#define LOONGSON_PCIIO_BASE	0x1fd00000
+#define LOONGSON_PCIIO_SIZE	0x00100000	/* 1M */
+#define LOONGSON_PCIIO_TOP	(LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
+
+/* Loongson Register Bases */
+
+#define LOONGSON_PCICONFIGBASE	0x00
+#define LOONGSON_REGBASE	0x100
 
 /* PCI Configuration Registers */
-#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+#define LOONGSON_PCI_REG(x)	LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
+#define LOONGSON_PCIDID		LOONGSON_PCI_REG(0x00)
+#define LOONGSON_PCICMD		LOONGSON_PCI_REG(0x04)
+#define LOONGSON_PCICLASS 	LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCILTIMER	LOONGSON_PCI_REG(0x0c)
+#define LOONGSON_PCIBASE0 	LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1 	LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2 	LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3 	LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4 	LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIEXPRBASE	LOONGSON_PCI_REG(0x30)
+#define LOONGSON_PCIINT		LOONGSON_PCI_REG(0x3c)
+
+#define LOONGSON_PCI_ISR4C	LOONGSON_PCI_REG(0x4c)
+
+#define LOONGSON_PCICMD_PERR_CLR	0x80000000
+#define LOONGSON_PCICMD_SERR_CLR	0x40000000
+#define LOONGSON_PCICMD_MABORT_CLR	0x20000000
+#define LOONGSON_PCICMD_MTABORT_CLR	0x10000000
+#define LOONGSON_PCICMD_TABORT_CLR	0x08000000
+#define LOONGSON_PCICMD_MPERR_CLR 	0x01000000
+#define LOONGSON_PCICMD_PERRRESPEN	0x00000040
+#define LOONGSON_PCICMD_ASTEPEN		0x00000080
+#define LOONGSON_PCICMD_SERREN		0x00000100
+#define LOONGSON_PCILTIMER_BUSLATENCY	0x0000ff00
+#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT	8
+
+/* Loongson h/w Configuration */
+
+#define LOONGSON_GENCFG_OFFSET		0x4
+#define LOONGSON_GENCFG	LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+
+#define LOONGSON_GENCFG_DEBUGMODE	0x00000001
+#define LOONGSON_GENCFG_SNOOPEN		0x00000002
+#define LOONGSON_GENCFG_CPUSELFRESET	0x00000004
+
+#define LOONGSON_GENCFG_FORCE_IRQA	0x00000008
+#define LOONGSON_GENCFG_IRQA_ISOUT	0x00000010
+#define LOONGSON_GENCFG_IRQA_FROM_INT1	0x00000020
+#define LOONGSON_GENCFG_BYTESWAP	0x00000040
+
+#define LOONGSON_GENCFG_UNCACHED	0x00000080
+#define LOONGSON_GENCFG_PREFETCHEN	0x00000100
+#define LOONGSON_GENCFG_WBEHINDEN	0x00000200
+#define LOONGSON_GENCFG_CACHEALG	0x00000c00
+#define LOONGSON_GENCFG_CACHEALG_SHIFT	10
+#define LOONGSON_GENCFG_PCIQUEUE	0x00001000
+#define LOONGSON_GENCFG_CACHESTOP	0x00002000
+#define LOONGSON_GENCFG_MSTRBYTESWAP	0x00004000
+#define LOONGSON_GENCFG_BUSERREN	0x00008000
+#define LOONGSON_GENCFG_NORETRYTIMEOUT	0x00010000
+#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* PCI address map control */
+
+#define LOONGSON_PCIMAP			LOONGSON_REG(LOONGSON_REGBASE + 0x10)
+#define LOONGSON_PCIMEMBASECFG		LOONGSON_REG(LOONGSON_REGBASE + 0x14)
+#define LOONGSON_PCIMAP_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x18)
+
+/* GPIO Regs - r/w */
+
+#define LOONGSON_GPIODATA 		LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIOIE			LOONGSON_REG(LOONGSON_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define LOONGSON_INTEDGE		LOONGSON_REG(LOONGSON_REGBASE + 0x24)
+#define LOONGSON_INTSTEER 		LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTPOL			LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define LOONGSON_INTENSET 		LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR 		LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTEN			LOONGSON_REG(LOONGSON_REGBASE + 0x38)
+#define LOONGSON_INTISR			LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
+
+/* ICU */
+#define LOONGSON_ICU_MBOXES		0x0000000f
+#define LOONGSON_ICU_MBOXES_SHIFT 	0
+#define LOONGSON_ICU_DMARDY		0x00000010
+#define LOONGSON_ICU_DMAEMPTY		0x00000020
+#define LOONGSON_ICU_COPYRDY		0x00000040
+#define LOONGSON_ICU_COPYEMPTY		0x00000080
+#define LOONGSON_ICU_COPYERR		0x00000100
+#define LOONGSON_ICU_PCIIRQ		0x00000200
+#define LOONGSON_ICU_MASTERERR		0x00000400
+#define LOONGSON_ICU_SYSTEMERR		0x00000800
+#define LOONGSON_ICU_DRAMPERR		0x00001000
+#define LOONGSON_ICU_RETRYERR		0x00002000
+#define LOONGSON_ICU_GPIOS		0x01ff0000
+#define LOONGSON_ICU_GPIOS_SHIFT		16
+#define LOONGSON_ICU_GPINS		0x7e000000
+#define LOONGSON_ICU_GPINS_SHIFT		25
+#define LOONGSON_ICU_MBOX(N)		(1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
+#define LOONGSON_ICU_GPIO(N)		(1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
+#define LOONGSON_ICU_GPIN(N)		(1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
+
+/* PCI prefetch window base & mask */
+
+#define LOONGSON_MEM_WIN_BASE_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
 
 /* PCI_Hit*_Sel_* */
 
-#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
-#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
-#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
-#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
-#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
-#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+#define LOONGSON_PCI_HIT0_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x64)
 
 /* PXArb Config & Status */
 
-#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
-#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+#define LOONGSON_PXARB_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS		LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
+
+/* pcimap */
+
+#define LOONGSON_PCIMAP_PCIMAP_LO0	0x0000003f
+#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define LOONGSON_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define LOONGSON_PCIMAP_PCIMAP_LO2	0x0003f000
+#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define LOONGSON_PCIMAP_PCIMAP_2	0x00040000
+#define LOONGSON_PCIMAP_WIN(WIN, ADDR)	\
+	((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
+#include <linux/cpufreq.h>
+extern void loongson2_cpu_wait(void);
+extern struct cpufreq_frequency_table loongson2_clockmod_table[];
+
+/* Chip Config */
+#define LOONGSON_CHIPCFG0		LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+#endif
+
+/*
+ * address windows configuration module
+ *
+ * loongson2e do not have this module
+ */
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/* address window config module base address */
+#define LOONGSON_ADDRWINCFG_BASE		0x3ff00000ul
+#define LOONGSON_ADDRWINCFG_SIZE		0x180
+
+extern unsigned long _loongson_addrwincfg_base;
+#define LOONGSON_ADDRWINCFG(offset) \
+	(*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
+
+#define CPU_WIN0_BASE	LOONGSON_ADDRWINCFG(0x00)
+#define CPU_WIN1_BASE	LOONGSON_ADDRWINCFG(0x08)
+#define CPU_WIN2_BASE	LOONGSON_ADDRWINCFG(0x10)
+#define CPU_WIN3_BASE	LOONGSON_ADDRWINCFG(0x18)
+
+#define CPU_WIN0_MASK	LOONGSON_ADDRWINCFG(0x20)
+#define CPU_WIN1_MASK	LOONGSON_ADDRWINCFG(0x28)
+#define CPU_WIN2_MASK	LOONGSON_ADDRWINCFG(0x30)
+#define CPU_WIN3_MASK	LOONGSON_ADDRWINCFG(0x38)
+
+#define CPU_WIN0_MMAP	LOONGSON_ADDRWINCFG(0x40)
+#define CPU_WIN1_MMAP	LOONGSON_ADDRWINCFG(0x48)
+#define CPU_WIN2_MMAP	LOONGSON_ADDRWINCFG(0x50)
+#define CPU_WIN3_MMAP	LOONGSON_ADDRWINCFG(0x58)
+
+#define PCIDMA_WIN0_BASE	LOONGSON_ADDRWINCFG(0x60)
+#define PCIDMA_WIN1_BASE	LOONGSON_ADDRWINCFG(0x68)
+#define PCIDMA_WIN2_BASE	LOONGSON_ADDRWINCFG(0x70)
+#define PCIDMA_WIN3_BASE	LOONGSON_ADDRWINCFG(0x78)
+
+#define PCIDMA_WIN0_MASK	LOONGSON_ADDRWINCFG(0x80)
+#define PCIDMA_WIN1_MASK	LOONGSON_ADDRWINCFG(0x88)
+#define PCIDMA_WIN2_MASK	LOONGSON_ADDRWINCFG(0x90)
+#define PCIDMA_WIN3_MASK	LOONGSON_ADDRWINCFG(0x98)
+
+#define PCIDMA_WIN0_MMAP	LOONGSON_ADDRWINCFG(0xa0)
+#define PCIDMA_WIN1_MMAP	LOONGSON_ADDRWINCFG(0xa8)
+#define PCIDMA_WIN2_MMAP	LOONGSON_ADDRWINCFG(0xb0)
+#define PCIDMA_WIN3_MMAP	LOONGSON_ADDRWINCFG(0xb8)
+
+#define ADDRWIN_WIN0	0
+#define ADDRWIN_WIN1	1
+#define ADDRWIN_WIN2	2
+#define ADDRWIN_WIN3	3
+
+#define ADDRWIN_MAP_DST_DDR	0
+#define ADDRWIN_MAP_DST_PCI	1
+#define ADDRWIN_MAP_DST_LIO	1
+
+/*
+ * s: CPU, PCIDMA
+ * d: DDR, PCI, LIO
+ * win: 0, 1, 2, 3
+ * src: map source
+ * dst: map destination
+ * size: ~mask + 1
+ */
+#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
+	s##_WIN##w##_BASE = (src); \
+	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MASK = ~(size-1); \
+} while (0)
+
+#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
+#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
+#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
 
-/* loongson2-specific perf counter IRQ */
-#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
+#endif	/* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
 
 #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index 206ea20..acf8359 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -13,10 +13,15 @@
 
 #ifdef CONFIG_LEMOTE_FULOONG2E
 
-#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
-
 #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
 
 #endif
 
+/* use fuloong2f as the default machine of LEMOTE_MACH2F */
+#ifdef CONFIG_LEMOTE_MACH2F
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
+
+#endif
+
 #endif /* __ASM_MACH_LOONGSON_MACHINE_H */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
index bd7b3cb..e9960f3 100644
--- a/arch/mips/include/asm/mach-loongson/mem.h
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -12,19 +12,30 @@
 #define __ASM_MACH_LOONGSON_MEM_H
 
 /*
- * On Lemote Loongson 2e
+ * high memory space
  *
- * the high memory space starts from 512M.
- * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G 256M
  */
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START	0x20000000
+#else
+#define LOONGSON_HIGHMEM_START	0x90000000
+#endif
 
-#ifdef CONFIG_LEMOTE_FULOONG2E
-
-#define LOONGSON_HIGHMEM_START  0x20000000
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
 
 #define LOONGSON_MMIO_MEM_START 0x10000000
-#define LOONGSON_MMIO_MEM_END   0x20000000
 
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END	0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END	0x80000000
 #endif
 
 #endif /* __ASM_MACH_LOONGSON_MEM_H */
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index f1663ca..a199a4f 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General
@@ -22,16 +23,39 @@
 #ifndef __ASM_MACH_LOONGSON_PCI_H_
 #define __ASM_MACH_LOONGSON_PCI_H_
 
-extern struct pci_ops bonito64_pci_ops;
+extern struct pci_ops loongson_pci_ops;
 
-#ifdef CONFIG_LEMOTE_FULOONG2E
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
+#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
+
+#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
+					LOONGSON_PCI_MEM_START + 1)
+
+#else	/* loongson2f/32bit & loongson2e */
 
 /* this pci memory space is mapped by pcimap in pci.c */
-#define LOONGSON_PCI_MEM_START	BONITO_PCILO1_BASE
-#define LOONGSON_PCI_MEM_END	(BONITO_PCILO1_BASE + 0x04000000 * 2)
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
 /* this is an offset from mips_io_port_base */
 #define LOONGSON_PCI_IO_START	0x00004000UL
 
-#endif
+#endif	/* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
 
 #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
new file mode 100644
index 0000000..bcad43a
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/asic.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_ASIC_H
+#define _ASM_MACH_POWERTV_ASIC_H
+
+#include <linux/ioport.h>
+#include <asm/mach-powertv/asic_regs.h>
+
+#define DVR_CAPABLE     (1<<0)
+#define PCIE_CAPABLE    (1<<1)
+#define FFS_CAPABLE     (1<<2)
+#define DISPLAY_CAPABLE (1<<3)
+
+/* Platform Family types
+ * For compitability, the new value must be added in the end */
+enum family_type {
+	FAMILY_8500,
+	FAMILY_8500RNG,
+	FAMILY_4500,
+	FAMILY_1500,
+	FAMILY_8600,
+	FAMILY_4600,
+	FAMILY_4600VZA,
+	FAMILY_8600VZB,
+	FAMILY_1500VZE,
+	FAMILY_1500VZF,
+	FAMILIES
+};
+
+/* Register maps for each ASIC */
+extern const struct register_map calliope_register_map;
+extern const struct register_map cronus_register_map;
+extern const struct register_map zeus_register_map;
+
+extern struct resource dvr_cronus_resources[];
+extern struct resource dvr_zeus_resources[];
+extern struct resource non_dvr_calliope_resources[];
+extern struct resource non_dvr_cronus_resources[];
+extern struct resource non_dvr_cronuslite_resources[];
+extern struct resource non_dvr_vz_calliope_resources[];
+extern struct resource non_dvr_vze_calliope_resources[];
+extern struct resource non_dvr_vzf_calliope_resources[];
+extern struct resource non_dvr_zeus_resources[];
+
+extern void powertv_platform_init(void);
+extern void platform_alloc_bootmem(void);
+extern enum asic_type platform_get_asic(void);
+extern enum family_type platform_get_family(void);
+extern int platform_supports_dvr(void);
+extern int platform_supports_ffs(void);
+extern int platform_supports_pcie(void);
+extern int platform_supports_display(void);
+extern void configure_platform(void);
+extern void platform_configure_usb_ehci(void);
+extern void platform_unconfigure_usb_ehci(void);
+extern void platform_configure_usb_ohci(void);
+extern void platform_unconfigure_usb_ohci(void);
+
+/* Platform Resources */
+#define ASIC_RESOURCE_GET_EXISTS 1
+extern struct resource *asic_resource_get(const char *name);
+extern void platform_release_memory(void *baddr, int size);
+
+/* Reboot Cause */
+extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
+extern void set_locked_reboot_cause(char code, unsigned int data,
+	unsigned int data2);
+
+enum sys_reboot_type {
+	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
+	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
+					 * mode */
+	sys_user_reboot = 0x02,		/* Reboot initiated by user */
+	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
+	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
+	sys_silent_reboot = 0x05,	/* Silent reboot */
+	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
+	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_code_change = 0x08,		/* Reboot to take code change.
+					 * Older drivers may report as
+					 * userReboot. */
+	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
+					 * reset button reset.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
+};
+
+#endif /* _ASM_MACH_POWERTV_ASIC_H */
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
new file mode 100644
index 0000000..9a65c93
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/asic_regs.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_MACH_POWERTV_ASIC_H_
+#define __ASM_MACH_POWERTV_ASIC_H_
+#include <linux/io.h>
+
+/* ASIC types */
+enum asic_type {
+	ASIC_UNKNOWN,
+	ASIC_ZEUS,
+	ASIC_CALLIOPE,
+	ASIC_CRONUS,
+	ASIC_CRONUSLITE,
+	ASICS
+};
+
+/* hardcoded values read from Chip Version registers */
+#define CRONUS_10	0x0B4C1C20
+#define CRONUS_11	0x0B4C1C21
+#define CRONUSLITE_10	0x0B4C1C40
+
+#define NAND_FLASH_BASE	0x03000000
+#define ZEUS_IO_BASE	0x09000000
+#define CALLIOPE_IO_BASE	0x08000000
+#define CRONUS_IO_BASE	0x09000000
+#define ASIC_IO_SIZE	0x01000000
+
+/* Definitions for backward compatibility */
+#define UART1_INTSTAT	uart1_intstat
+#define UART1_INTEN	uart1_inten
+#define UART1_CONFIG1	uart1_config1
+#define UART1_CONFIG2	uart1_config2
+#define UART1_DIVISORHI	uart1_divisorhi
+#define UART1_DIVISORLO	uart1_divisorlo
+#define UART1_DATA	uart1_data
+#define UART1_STATUS	uart1_status
+
+/* ASIC register enumeration */
+struct register_map {
+	u32 eic_slow0_strt_add;
+	u32 eic_cfg_bits;
+	u32 eic_ready_status;
+
+	u32 chipver3;
+	u32 chipver2;
+	u32 chipver1;
+	u32 chipver0;
+
+	u32 uart1_intstat;
+	u32 uart1_inten;
+	u32 uart1_config1;
+	u32 uart1_config2;
+	u32 uart1_divisorhi;
+	u32 uart1_divisorlo;
+	u32 uart1_data;
+	u32 uart1_status;
+
+	u32 int_stat_3;
+	u32 int_stat_2;
+	u32 int_stat_1;
+	u32 int_stat_0;
+	u32 int_config;
+	u32 int_int_scan;
+	u32 ien_int_3;
+	u32 ien_int_2;
+	u32 ien_int_1;
+	u32 ien_int_0;
+	u32 int_level_3_3;
+	u32 int_level_3_2;
+	u32 int_level_3_1;
+	u32 int_level_3_0;
+	u32 int_level_2_3;
+	u32 int_level_2_2;
+	u32 int_level_2_1;
+	u32 int_level_2_0;
+	u32 int_level_1_3;
+	u32 int_level_1_2;
+	u32 int_level_1_1;
+	u32 int_level_1_0;
+	u32 int_level_0_3;
+	u32 int_level_0_2;
+	u32 int_level_0_1;
+	u32 int_level_0_0;
+	u32 int_docsis_en;
+
+	u32 mips_pll_setup;
+	u32 usb_fs;
+	u32 test_bus;
+	u32 crt_spare;
+	u32 usb2_ohci_int_mask;
+	u32 usb2_strap;
+	u32 ehci_hcapbase;
+	u32 ohci_hc_revision;
+	u32 bcm1_bs_lmi_steer;
+	u32 usb2_control;
+	u32 usb2_stbus_obc;
+	u32 usb2_stbus_mess_size;
+	u32 usb2_stbus_chunk_size;
+
+	u32 pcie_regs;
+	u32 tim_ch;
+	u32 tim_cl;
+	u32 gpio_dout;
+	u32 gpio_din;
+	u32 gpio_dir;
+	u32 watchdog;
+	u32 front_panel;
+
+	u32 register_maps;
+};
+
+extern enum asic_type asic;
+extern const struct register_map *register_map;
+extern unsigned long asic_phy_base;	/* Physical address of ASIC */
+extern unsigned long asic_base;		/* Virtual address of ASIC */
+
+/*
+ * Macros to interface to registers through their ioremapped address
+ * asic_reg_offset	Returns the offset of a given register from the start
+ *			of the ASIC address space
+ * asic_reg_phys_addr	Returns the physical address of the given register
+ * asic_reg_addr	Returns the iomapped virtual address of the given
+ *			register.
+ */
+#define asic_reg_offset(x)	(register_map->x)
+#define asic_reg_phys_addr(x)	(asic_phy_base + asic_reg_offset(x))
+#define asic_reg_addr(x) \
+	((unsigned int *) (asic_base + asic_reg_offset(x)))
+
+/*
+ * The asic_reg macro is gone. It should be replaced by either asic_read or
+ * asic_write, as appropriate.
+ */
+
+#define asic_read(x)		readl(asic_reg_addr(x))
+#define asic_write(v, x)	writel(v, asic_reg_addr(x))
+
+extern void asic_irq_init(void);
+#endif
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
new file mode 100644
index 0000000..5b8d5eb
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Version from mach-generic modified to support PowerTV port
+ * Portions Copyright (C) 2009  Cisco Systems, Inc.
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+
+#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
+#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
+
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <asm/mach-powertv/asic.h>
+
+static inline bool is_kseg2(void *addr)
+{
+	return (unsigned long)addr >= KSEG2;
+}
+
+static inline unsigned long virt_to_phys_from_pte(void *addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	unsigned long virt_addr = (unsigned long)addr;
+	unsigned long phys_addr = 0UL;
+
+	/* get the page global directory. */
+	pgd = pgd_offset_k(virt_addr);
+
+	if (!pgd_none(*pgd)) {
+		/* get the page upper directory */
+		pud = pud_offset(pgd, virt_addr);
+		if (!pud_none(*pud)) {
+			/* get the page middle directory */
+			pmd = pmd_offset(pud, virt_addr);
+			if (!pmd_none(*pmd)) {
+				/* get a pointer to the page table entry */
+				ptep = pte_offset(pmd, virt_addr);
+				pte = *ptep;
+				/* check for a valid page */
+				if (pte_present(pte)) {
+					/* get the physical address the page is
+					 * refering to */
+					phys_addr = (unsigned long)
+						page_to_phys(pte_page(pte));
+					/* add the offset within the page */
+					phys_addr |= (virt_addr & ~PAGE_MASK);
+				}
+			}
+		}
+	}
+
+	return phys_addr;
+}
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	if (is_kseg2(addr))
+		return phys_to_bus(virt_to_phys_from_pte(addr));
+	else
+		return phys_to_bus(virt_to_phys(addr));
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+	struct page *page)
+{
+	return phys_to_bus(page_to_phys(page));
+}
+
+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
+	dma_addr_t dma_addr)
+{
+	return bus_to_phys(dma_addr);
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
new file mode 100644
index 0000000..629a574
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/interrupts.h
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef	_ASM_MACH_POWERTV_INTERRUPTS_H_
+#define _ASM_MACH_POWERTV_INTERRUPTS_H_
+
+/*
+ * Defines for all of the interrupt lines
+ */
+
+/* Definitions for backward compatibility */
+#define kIrq_Uart1		irq_uart1
+
+#define ibase 0
+
+/*------------- Register: int_stat_3 */
+/* 126 unused (bit 31) */
+#define irq_asc2video		(ibase+126)	/* ASC 2 Video Interrupt */
+#define irq_asc1video		(ibase+125)	/* ASC 1 Video Interrupt */
+#define irq_comms_block_wd	(ibase+124)	/* ASC 1 Video Interrupt */
+#define irq_fdma_mailbox	(ibase+123)	/* FDMA Mailbox Output */
+#define irq_fdma_gp		(ibase+122)	/* FDMA GP Output */
+#define irq_mips_pic		(ibase+121)	/* MIPS Performance Counter
+						 * Interrupt */
+#define irq_mips_timer		(ibase+120)	/* MIPS Timer Interrupt */
+#define irq_memory_protect	(ibase+119)	/* Memory Protection Interrupt
+						 * -- Ored by glue logic inside
+						 *  SPARC ILC (see
+						 *  INT_MEM_PROT_STAT, below,
+						 *  for individual interrupts)
+						 */
+/* 118 unused (bit 22) */
+#define irq_sbag		(ibase+117)	/* SBAG Interrupt -- Ored by
+						 * glue logic inside SPARC ILC
+						 * (see INT_SBAG_STAT, below,
+						 * for individual interrupts) */
+#define irq_qam_b_fec		(ibase+116)	/* QAM  B FEC Interrupt */
+#define irq_qam_a_fec		(ibase+115)	/* QAM A FEC Interrupt */
+/* 114 unused 	(bit 18) */
+#define irq_mailbox		(ibase+113)	/* Mailbox Debug Interrupt  --
+						 * Ored by glue logic inside
+						 * SPARC ILC (see
+						 * INT_MAILBOX_STAT, below, for
+						 * individual interrupts) */
+#define irq_fuse_stat1		(ibase+112)	/* Fuse Status 1 */
+#define irq_fuse_stat2		(ibase+111)	/* Fuse Status 2 */
+#define irq_fuse_stat3		(ibase+110)	/* Blitter Interrupt / Fuse
+						 * Status 3 */
+#define irq_blitter		(ibase+110)	/* Blitter Interrupt / Fuse
+						 * Status 3 */
+#define irq_avc1_pp0		(ibase+109)	/* AVC Decoder #1 PP0
+						 * Interrupt */
+#define irq_avc1_pp1		(ibase+108)	/* AVC Decoder #1 PP1
+						 * Interrupt */
+#define irq_avc1_mbe		(ibase+107)	/* AVC Decoder #1 MBE
+						 * Interrupt */
+#define irq_avc2_pp0		(ibase+106)	/* AVC Decoder #2 PP0
+						 * Interrupt */
+#define irq_avc2_pp1		(ibase+105)	/* AVC Decoder #2 PP1
+						 * Interrupt */
+#define irq_avc2_mbe		(ibase+104)	/* AVC Decoder #2 MBE
+						 * Interrupt */
+#define irq_zbug_spi		(ibase+103)	/* Zbug SPI Slave Interrupt */
+#define irq_qam_mod2		(ibase+102)	/* QAM Modulator 2 DMA
+						 * Interrupt */
+#define irq_ir_rx		(ibase+101)	/* IR RX 2 Interrupt */
+#define irq_aud_dsp2		(ibase+100)	/* Audio DSP #2 Interrupt */
+#define irq_aud_dsp1		(ibase+99)	/* Audio DSP #1 Interrupt */
+#define irq_docsis		(ibase+98)	/* DOCSIS Debug Interrupt */
+#define irq_sd_dvp1		(ibase+97)	/* SD DVP #1 Interrupt */
+#define irq_sd_dvp2		(ibase+96)	/* SD DVP #2 Interrupt */
+/*------------- Register: int_stat_2 */
+#define irq_hd_dvp		(ibase+95)	/* HD DVP Interrupt */
+#define kIrq_Prewatchdog	(ibase+94)	/* watchdog Pre-Interrupt */
+#define irq_timer2		(ibase+93)	/* Programmable Timer
+						 * Interrupt 2 */
+#define irq_1394		(ibase+92)	/* 1394 Firewire Interrupt */
+#define irq_usbohci		(ibase+91)	/* USB 2.0 OHCI Interrupt */
+#define irq_usbehci		(ibase+90)	/* USB 2.0 EHCI Interrupt */
+#define irq_pciexp		(ibase+89)	/* PCI Express 0 Interrupt */
+#define irq_pciexp0		(ibase+89)	/* PCI Express 0 Interrupt */
+#define irq_afe1		(ibase+88)	/* AFE 1 Interrupt */
+#define irq_sata		(ibase+87)	/* SATA 1 Interrupt */
+#define irq_sata1		(ibase+87)	/* SATA 1 Interrupt */
+#define irq_dtcp		(ibase+86)	/* DTCP Interrupt */
+#define irq_pciexp1		(ibase+85)	/* PCI Express 1 Interrupt */
+/* 84 unused 	(bit 20) */
+/* 83 unused 	(bit 19) */
+/* 82 unused 	(bit 18) */
+#define irq_sata2		(ibase+81)	/* SATA2 Interrupt */
+#define irq_uart2		(ibase+80)	/* UART2 Interrupt */
+#define irq_legacy_usb		(ibase+79)	/* Legacy USB Host ISR (1.1
+						 * Host module) */
+#define irq_pod			(ibase+78)	/* POD Interrupt */
+#define irq_slave_usb		(ibase+77)	/* Slave USB */
+#define irq_denc1		(ibase+76)	/* DENC #1 VTG Interrupt */
+#define irq_vbi_vtg		(ibase+75)	/* VBI VTG Interrupt */
+#define irq_afe2		(ibase+74)	/* AFE 2 Interrupt */
+#define irq_denc2		(ibase+73)	/* DENC #2 VTG Interrupt */
+#define irq_asc2		(ibase+72)	/* ASC #2 Interrupt */
+#define irq_asc1		(ibase+71)	/* ASC #1 Interrupt */
+#define irq_mod_dma		(ibase+70)	/* Modulator DMA Interrupt */
+#define irq_byte_eng1		(ibase+69)	/* Byte Engine Interrupt [1] */
+#define irq_byte_eng0		(ibase+68)	/* Byte Engine Interrupt [0] */
+/* 67 unused 	(bit 03) */
+/* 66 unused 	(bit 02) */
+/* 65 unused 	(bit 01) */
+/* 64 unused 	(bit 00) */
+/*------------- Register: int_stat_1 */
+/* 63 unused 	(bit 31) */
+/* 62 unused 	(bit 30) */
+/* 61 unused 	(bit 29) */
+/* 60 unused 	(bit 28) */
+/* 59 unused 	(bit 27) */
+/* 58 unused 	(bit 26) */
+/* 57 unused 	(bit 25) */
+/* 56 unused 	(bit 24) */
+#define irq_buf_dma_mem2mem	(ibase+55)	/* BufDMA Memory to Memory
+						 * Interrupt */
+#define irq_buf_dma_usbtransmit	(ibase+54)	/* BufDMA USB Transmit
+						 * Interrupt */
+#define irq_buf_dma_qpskpodtransmit (ibase+53)	/* BufDMA QPSK/POD Tramsit
+						 * Interrupt */
+#define irq_buf_dma_transmit_error (ibase+52)	/* BufDMA Transmit Error
+						 * Interrupt */
+#define irq_buf_dma_usbrecv	(ibase+51)	/* BufDMA USB Receive
+						 * Interrupt */
+#define irq_buf_dma_qpskpodrecv	(ibase+50)	/* BufDMA QPSK/POD Receive
+						 * Interrupt */
+#define irq_buf_dma_recv_error	(ibase+49)	/* BufDMA Receive Error
+						 * Interrupt */
+#define irq_qamdma_transmit_play (ibase+48)	/* QAMDMA Transmit/Play
+						 * Interrupt */
+#define irq_qamdma_transmit_error (ibase+47)	/* QAMDMA Transmit Error
+						 * Interrupt */
+#define irq_qamdma_recv2high	(ibase+46)	/* QAMDMA Receive 2 High
+						 * (Chans 63-32) */
+#define irq_qamdma_recv2low	(ibase+45)	/* QAMDMA Receive 2 Low
+						 * (Chans 31-0) */
+#define irq_qamdma_recv1high	(ibase+44)	/* QAMDMA Receive 1 High
+						 * (Chans 63-32) */
+#define irq_qamdma_recv1low	(ibase+43)	/* QAMDMA Receive 1 Low
+						 * (Chans 31-0) */
+#define irq_qamdma_recv_error	(ibase+42)	/* QAMDMA Receive Error
+						 * Interrupt */
+#define irq_mpegsplice		(ibase+41)	/* MPEG Splice Interrupt */
+#define irq_deinterlace_rdy	(ibase+40)	/* Deinterlacer Frame Ready
+						 * Interrupt */
+#define irq_ext_in0		(ibase+39)	/* External Interrupt irq_in0 */
+#define irq_gpio3		(ibase+38)	/* GP I/O IRQ 3 - From GP I/O
+						 * Module */
+#define irq_gpio2		(ibase+37)	/* GP I/O IRQ 2 - From GP I/O
+						 * Module (ABE_intN) */
+#define irq_pcrcmplt1		(ibase+36)	/* PCR Capture Complete  or
+						 * Discontinuity 1 */
+#define irq_pcrcmplt2		(ibase+35)	/* PCR Capture Complete or
+						 * Discontinuity 2 */
+#define irq_parse_peierr	(ibase+34)	/* PID Parser Error Detect
+						 * (PEI) */
+#define irq_parse_cont_err	(ibase+33)	/* PID Parser continuity error
+						 * detect */
+#define irq_ds1framer		(ibase+32)	/* DS1 Framer Interrupt */
+/*------------- Register: int_stat_0 */
+#define irq_gpio1		(ibase+31)	/* GP I/O IRQ 1 - From GP I/O
+						 * Module */
+#define irq_gpio0		(ibase+30)	/* GP I/O IRQ 0 - From GP I/O
+						 * Module */
+#define irq_qpsk_out_aloha	(ibase+29)	/* QPSK Output Slotted Aloha
+						 * (chan 3) Transmission
+						 * Completed OK */
+#define irq_qpsk_out_tdma	(ibase+28)	/* QPSK Output TDMA (chan 2)
+						 * Transmission Completed OK */
+#define irq_qpsk_out_reserve	(ibase+27)	/* QPSK Output Reservation
+						 * (chan 1) Transmission
+						 * Completed OK */
+#define irq_qpsk_out_aloha_err	(ibase+26)	/* QPSK Output Slotted Aloha
+						 * (chan 3)Transmission
+						 * completed with Errors. */
+#define irq_qpsk_out_tdma_err	(ibase+25)	/* QPSK Output TDMA (chan 2)
+						 * Transmission completed with
+						 * Errors. */
+#define irq_qpsk_out_rsrv_err	(ibase+24)	/* QPSK Output Reservation
+						 * (chan 1) Transmission
+						 * completed with Errors */
+#define irq_aloha_fail		(ibase+23)	/* Unsuccessful Resend of Aloha
+						 * for N times. Aloha retry
+						 * timeout for channel 3. */
+#define irq_timer1		(ibase+22)	/* Programmable Timer
+						 * Interrupt */
+#define irq_keyboard		(ibase+21)	/* Keyboard Module Interrupt */
+#define irq_i2c			(ibase+20)	/* I2C Module Interrupt */
+#define irq_spi			(ibase+19)	/* SPI Module Interrupt */
+#define irq_irblaster		(ibase+18)	/* IR Blaster Interrupt */
+#define irq_splice_detect	(ibase+17)	/* PID Key Change Interrupt or
+						 * Splice Detect Interrupt */
+#define irq_se_micro		(ibase+16)	/* Secure Micro I/F Module
+						 * Interrupt */
+#define irq_uart1		(ibase+15)	/* UART Interrupt */
+#define irq_irrecv		(ibase+14)	/* IR Receiver Interrupt */
+#define irq_host_int1		(ibase+13)	/* Host-to-Host Interrupt 1 */
+#define irq_host_int0		(ibase+12)	/* Host-to-Host Interrupt 0 */
+#define irq_qpsk_hecerr		(ibase+11)	/* QPSK HEC Error Interrupt */
+#define irq_qpsk_crcerr		(ibase+10)	/* QPSK AAL-5 CRC Error
+						 * Interrupt */
+/* 9 unused 	(bit 09) */
+/* 8 unused 	(bit 08) */
+#define irq_psicrcerr		(ibase+7) 	/* QAM PSI CRC Error
+						 * Interrupt */
+#define irq_psilength_err	(ibase+6) 	/* QAM PSI Length Error
+						 * Interrupt */
+#define irq_esfforward		(ibase+5) 	/* ESF Interrupt Mark From
+						 * Forward Path Reference -
+						 * every 3ms when forward Mbits
+						 * and forward slot control
+						 * bytes are updated. */
+#define irq_esfreverse		(ibase+4) 	/* ESF Interrupt Mark from
+						 * Reverse Path Reference -
+						 * delayed from forward mark by
+						 * the ranging delay plus a
+						 * fixed amount. When reverse
+						 * Mbits and reverse slot
+						 * control bytes are updated.
+						 * Occurs every 3ms for 3.0M and
+						 * 1.554 M upstream rates and
+						 * every 6 ms for 256K upstream
+						 * rate. */
+#define irq_aloha_timeout	(ibase+3) 	/* Slotted-Aloha timeout on
+						 * Channel 1. */
+#define irq_reservation		(ibase+2) 	/* Partial (or Incremental)
+						 * Reservation Message Completed
+						 * or Slotted aloha verify for
+						 * channel 1. */
+#define irq_aloha3		(ibase+1) 	/* Slotted-Aloha Message Verify
+						 * Interrupt or Reservation
+						 * increment completed for
+						 * channel 3. */
+#define irq_mpeg_d		(ibase+0) 	/* MPEG Decoder Interrupt */
+#endif	/* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
+
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
new file mode 100644
index 0000000..e6276d5
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -0,0 +1,90 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ * Portions Copyright (C)  Cisco Systems, Inc.
+ */
+#ifndef __ASM_MACH_POWERTV_IOREMAP_H
+#define __ASM_MACH_POWERTV_IOREMAP_H
+
+#include <linux/types.h>
+
+#define LOW_MEM_BOUNDARY_PHYS	0x20000000
+#define LOW_MEM_BOUNDARY_MASK	(~(LOW_MEM_BOUNDARY_PHYS - 1))
+
+/*
+ * The bus addresses are different than the physical addresses that
+ * the processor sees by an offset. This offset varies by ASIC
+ * version. Define a variable to hold the offset and some macros to
+ * make the conversion simpler. */
+extern unsigned long phys_to_bus_offset;
+
+#ifdef CONFIG_HIGHMEM
+#define MEM_GAP_PHYS		0x60000000
+/*
+ * TODO: We will use the hard code for conversion between physical and
+ * bus until the bootloader releases their device tree to us.
+ */
+#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \
+	((x) + phys_to_bus_offset) : (x))
+#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \
+	((x) - phys_to_bus_offset) : (x))
+#else
+#define phys_to_bus(x) ((x) + phys_to_bus_offset)
+#define bus_to_phys(x) ((x) - phys_to_bus_offset)
+#endif
+
+/*
+ * Determine whether the address we are given is for an ASIC device
+ * Params:  addr    Address to check
+ * Returns: Zero if the address is not for ASIC devices, non-zero
+ *      if it is.
+ */
+static inline int asic_is_device_addr(phys_t addr)
+{
+	return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK);
+}
+
+/*
+ * Determine whether the address we are given is external RAM mappable
+ * into KSEG1.
+ * Params:  addr    Address to check
+ * Returns: Zero if the address is not for external RAM and
+ */
+static inline int asic_is_lowmem_ram_addr(phys_t addr)
+{
+	/*
+	 * The RAM always starts at the following address in the processor's
+	 * physical address space
+	 */
+	static const phys_t phys_ram_base = 0x10000000;
+	phys_t bus_ram_base;
+
+	bus_ram_base = phys_to_bus_offset + phys_ram_base;
+
+	return addr >= bus_ram_base &&
+		addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base));
+}
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+#endif /* __ASM_MACH_POWERTV_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/mips/include/asm/mach-powertv/irq.h
new file mode 100644
index 0000000..4bd5d0c
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/irq.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_IRQ_H
+#define _ASM_MACH_POWERTV_IRQ_H
+#include <asm/mach-powertv/interrupts.h>
+
+#define MIPS_CPU_IRQ_BASE	ibase
+#define NR_IRQS			127
+#endif
diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/mips/include/asm/mach-powertv/powertv-clock.h
new file mode 100644
index 0000000..6f3e9a0
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/powertv-clock.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+/*
+ * Local definitions for the powertv PCI code
+ */
+
+#ifndef _POWERTV_PCI_POWERTV_PCI_H_
+#define _POWERTV_PCI_POWERTV_PCI_H_
+extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+extern int asic_pcie_init(void);
+extern int asic_pcie_init(void);
+
+extern int log_level;
+#endif
diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-powertv/war.h
index 1f82180..7ac05ec 100644
--- a/arch/mips/include/asm/mach-excite/war.h
+++ b/arch/mips/include/asm/mach-powertv/war.h
@@ -3,10 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * This version for the PowerTV platform copied from the Malta version.
+ *
  * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
  */
-#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
-#define __ASM_MIPS_MACH_EXCITE_WAR_H
+#ifndef __ASM_MACH_POWERTV_WAR_H
+#define __ASM_MACH_POWERTV_WAR_H
 
 #define R4600_V1_INDEX_ICACHEOP_WAR	0
 #define R4600_V1_HIT_CACHEOP_WAR	0
@@ -14,12 +17,12 @@
 #define R5432_CP0_INTERRUPT_WAR		0
 #define BCM1250_M3_WAR			0
 #define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		1
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		1
-#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR	0
+#define MIPS34K_MISSED_ITLB_WAR		0
 
-#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
+#endif /* __ASM_MACH_POWERTV_WAR_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index a576ce0..d14e2ad 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -26,11 +26,6 @@
 /* offsets from base register */
 #define BONITO(x)	(x)
 
-#elif defined(CONFIG_LEMOTE_FULOONG2E)
-
-#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
-#define BONITO_IRQ_BASE   32
-
 #else
 
 /*
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 6083db5..145bb81 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -24,6 +24,33 @@
 #endif /* SMTC */
 #include <asm-generic/mm_hooks.h>
 
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd)				\
+	tlbmiss_handler_setup_pgd((unsigned long)(pgd))
+
+static inline void tlbmiss_handler_setup_pgd(unsigned long pgd)
+{
+	/* Check for swapper_pg_dir and convert to physical address. */
+	if ((pgd & CKSEG3) == CKSEG0)
+		pgd = CPHYSADDR(pgd);
+	write_c0_context(pgd << 11);
+}
+
+#define TLBMISS_HANDLER_SETUP()						\
+	do {								\
+		TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir);		\
+		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
+	} while (0)
+
+
+static inline unsigned long get_current_pgd(void)
+{
+	return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
+}
+
+#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
+
 /*
  * For the fast tlb miss handlers, we keep a per cpu array of pointers
  * to the current pgd for each processor. Also, the proc. id is stuffed
@@ -46,7 +73,7 @@ extern unsigned long pgd_current[];
 	back_to_back_c0_hazard();					\
 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
 #endif
-
+#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
 #define ASID_INC	0x40
diff --git a/arch/mips/include/asm/octeon/cvmx-agl-defs.h b/arch/mips/include/asm/octeon/cvmx-agl-defs.h
new file mode 100644
index 0000000..ec94b9a
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-agl-defs.h
@@ -0,0 +1,1194 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_AGL_DEFS_H__
+#define __CVMX_AGL_DEFS_H__
+
+#define CVMX_AGL_GMX_BAD_REG \
+	 CVMX_ADD_IO_SEG(0x00011800E0000518ull)
+#define CVMX_AGL_GMX_BIST \
+	 CVMX_ADD_IO_SEG(0x00011800E0000400ull)
+#define CVMX_AGL_GMX_DRV_CTL \
+	 CVMX_ADD_IO_SEG(0x00011800E00007F0ull)
+#define CVMX_AGL_GMX_INF_MODE \
+	 CVMX_ADD_IO_SEG(0x00011800E00007F8ull)
+#define CVMX_AGL_GMX_PRTX_CFG(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000010ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM0(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000180ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM1(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000188ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM2(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000190ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM3(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000198ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM4(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00001A0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM5(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00001A8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CAM_EN(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000108ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_ADR_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000100ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_DECISION(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000040ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_FRM_CHK(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000020ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_FRM_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000018ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_FRM_MAX(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000030ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_FRM_MIN(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000028ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_IFG(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000058ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_INT_EN(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000008ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_INT_REG(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000000ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_JABBER(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000038ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_PAUSE_DROP_TIME(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000068ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000050ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_OCTS(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000088ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_OCTS_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000098ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_OCTS_DMAC(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00000A8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_OCTS_DRP(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00000B8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_PKTS(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000080ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00000C0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_PKTS_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000090ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_PKTS_DMAC(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00000A0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00000B0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RXX_UDD_SKP(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000048ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_RX_BP_DROPX(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000420ull + (((offset) & 1) * 8))
+#define CVMX_AGL_GMX_RX_BP_OFFX(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000460ull + (((offset) & 1) * 8))
+#define CVMX_AGL_GMX_RX_BP_ONX(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000440ull + (((offset) & 1) * 8))
+#define CVMX_AGL_GMX_RX_PRT_INFO \
+	 CVMX_ADD_IO_SEG(0x00011800E00004E8ull)
+#define CVMX_AGL_GMX_RX_TX_STATUS \
+	 CVMX_ADD_IO_SEG(0x00011800E00007E8ull)
+#define CVMX_AGL_GMX_SMACX(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000230ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_STAT_BP \
+	 CVMX_ADD_IO_SEG(0x00011800E0000520ull)
+#define CVMX_AGL_GMX_TXX_APPEND(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000218ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000270ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_MIN_PKT(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000240ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_PAUSE_PKT_INTERVAL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000248ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_PAUSE_PKT_TIME(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000238ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_PAUSE_TOGO(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000258ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_PAUSE_ZERO(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000260ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_SOFT_PAUSE(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000250ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT0(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000280ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT1(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000288ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT2(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000290ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT3(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000298ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT4(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002A0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT5(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002A8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT6(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002B0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT7(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002B8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT8(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002C0ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STAT9(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E00002C8ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_STATS_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000268ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TXX_THRESH(offset) \
+	 CVMX_ADD_IO_SEG(0x00011800E0000210ull + (((offset) & 1) * 2048))
+#define CVMX_AGL_GMX_TX_BP \
+	 CVMX_ADD_IO_SEG(0x00011800E00004D0ull)
+#define CVMX_AGL_GMX_TX_COL_ATTEMPT \
+	 CVMX_ADD_IO_SEG(0x00011800E0000498ull)
+#define CVMX_AGL_GMX_TX_IFG \
+	 CVMX_ADD_IO_SEG(0x00011800E0000488ull)
+#define CVMX_AGL_GMX_TX_INT_EN \
+	 CVMX_ADD_IO_SEG(0x00011800E0000508ull)
+#define CVMX_AGL_GMX_TX_INT_REG \
+	 CVMX_ADD_IO_SEG(0x00011800E0000500ull)
+#define CVMX_AGL_GMX_TX_JAM \
+	 CVMX_ADD_IO_SEG(0x00011800E0000490ull)
+#define CVMX_AGL_GMX_TX_LFSR \
+	 CVMX_ADD_IO_SEG(0x00011800E00004F8ull)
+#define CVMX_AGL_GMX_TX_OVR_BP \
+	 CVMX_ADD_IO_SEG(0x00011800E00004C8ull)
+#define CVMX_AGL_GMX_TX_PAUSE_PKT_DMAC \
+	 CVMX_ADD_IO_SEG(0x00011800E00004A0ull)
+#define CVMX_AGL_GMX_TX_PAUSE_PKT_TYPE \
+	 CVMX_ADD_IO_SEG(0x00011800E00004A8ull)
+
+union cvmx_agl_gmx_bad_reg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_bad_reg_s {
+		uint64_t reserved_38_63:26;
+		uint64_t txpsh1:1;
+		uint64_t txpop1:1;
+		uint64_t ovrflw1:1;
+		uint64_t txpsh:1;
+		uint64_t txpop:1;
+		uint64_t ovrflw:1;
+		uint64_t reserved_27_31:5;
+		uint64_t statovr:1;
+		uint64_t reserved_23_25:3;
+		uint64_t loststat:1;
+		uint64_t reserved_4_21:18;
+		uint64_t out_ovr:2;
+		uint64_t reserved_0_1:2;
+	} s;
+	struct cvmx_agl_gmx_bad_reg_s cn52xx;
+	struct cvmx_agl_gmx_bad_reg_s cn52xxp1;
+	struct cvmx_agl_gmx_bad_reg_cn56xx {
+		uint64_t reserved_35_63:29;
+		uint64_t txpsh:1;
+		uint64_t txpop:1;
+		uint64_t ovrflw:1;
+		uint64_t reserved_27_31:5;
+		uint64_t statovr:1;
+		uint64_t reserved_23_25:3;
+		uint64_t loststat:1;
+		uint64_t reserved_3_21:19;
+		uint64_t out_ovr:1;
+		uint64_t reserved_0_1:2;
+	} cn56xx;
+	struct cvmx_agl_gmx_bad_reg_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_bist {
+	uint64_t u64;
+	struct cvmx_agl_gmx_bist_s {
+		uint64_t reserved_10_63:54;
+		uint64_t status:10;
+	} s;
+	struct cvmx_agl_gmx_bist_s cn52xx;
+	struct cvmx_agl_gmx_bist_s cn52xxp1;
+	struct cvmx_agl_gmx_bist_s cn56xx;
+	struct cvmx_agl_gmx_bist_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_drv_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_drv_ctl_s {
+		uint64_t reserved_49_63:15;
+		uint64_t byp_en1:1;
+		uint64_t reserved_45_47:3;
+		uint64_t pctl1:5;
+		uint64_t reserved_37_39:3;
+		uint64_t nctl1:5;
+		uint64_t reserved_17_31:15;
+		uint64_t byp_en:1;
+		uint64_t reserved_13_15:3;
+		uint64_t pctl:5;
+		uint64_t reserved_5_7:3;
+		uint64_t nctl:5;
+	} s;
+	struct cvmx_agl_gmx_drv_ctl_s cn52xx;
+	struct cvmx_agl_gmx_drv_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_drv_ctl_cn56xx {
+		uint64_t reserved_17_63:47;
+		uint64_t byp_en:1;
+		uint64_t reserved_13_15:3;
+		uint64_t pctl:5;
+		uint64_t reserved_5_7:3;
+		uint64_t nctl:5;
+	} cn56xx;
+	struct cvmx_agl_gmx_drv_ctl_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_inf_mode {
+	uint64_t u64;
+	struct cvmx_agl_gmx_inf_mode_s {
+		uint64_t reserved_2_63:62;
+		uint64_t en:1;
+		uint64_t reserved_0_0:1;
+	} s;
+	struct cvmx_agl_gmx_inf_mode_s cn52xx;
+	struct cvmx_agl_gmx_inf_mode_s cn52xxp1;
+	struct cvmx_agl_gmx_inf_mode_s cn56xx;
+	struct cvmx_agl_gmx_inf_mode_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_prtx_cfg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_prtx_cfg_s {
+		uint64_t reserved_6_63:58;
+		uint64_t tx_en:1;
+		uint64_t rx_en:1;
+		uint64_t slottime:1;
+		uint64_t duplex:1;
+		uint64_t speed:1;
+		uint64_t en:1;
+	} s;
+	struct cvmx_agl_gmx_prtx_cfg_s cn52xx;
+	struct cvmx_agl_gmx_prtx_cfg_s cn52xxp1;
+	struct cvmx_agl_gmx_prtx_cfg_s cn56xx;
+	struct cvmx_agl_gmx_prtx_cfg_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam0 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam0_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam1 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam1_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam2 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam2_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam3 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam3_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam4 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam4_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam5 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam5_s {
+		uint64_t adr:64;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_cam_en {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_cam_en_s {
+		uint64_t reserved_8_63:56;
+		uint64_t en:8;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_adr_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_adr_ctl_s {
+		uint64_t reserved_4_63:60;
+		uint64_t cam_mode:1;
+		uint64_t mcst:2;
+		uint64_t bcst:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xx;
+	struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xx;
+	struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_decision {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_decision_s {
+		uint64_t reserved_5_63:59;
+		uint64_t cnt:5;
+	} s;
+	struct cvmx_agl_gmx_rxx_decision_s cn52xx;
+	struct cvmx_agl_gmx_rxx_decision_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_decision_s cn56xx;
+	struct cvmx_agl_gmx_rxx_decision_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_frm_chk {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_frm_chk_s {
+		uint64_t reserved_9_63:55;
+		uint64_t skperr:1;
+		uint64_t rcverr:1;
+		uint64_t lenerr:1;
+		uint64_t alnerr:1;
+		uint64_t fcserr:1;
+		uint64_t jabber:1;
+		uint64_t maxerr:1;
+		uint64_t reserved_1_1:1;
+		uint64_t minerr:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_frm_chk_s cn52xx;
+	struct cvmx_agl_gmx_rxx_frm_chk_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_frm_chk_s cn56xx;
+	struct cvmx_agl_gmx_rxx_frm_chk_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_frm_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_frm_ctl_s {
+		uint64_t reserved_10_63:54;
+		uint64_t pre_align:1;
+		uint64_t pad_len:1;
+		uint64_t vlan_len:1;
+		uint64_t pre_free:1;
+		uint64_t ctl_smac:1;
+		uint64_t ctl_mcst:1;
+		uint64_t ctl_bck:1;
+		uint64_t ctl_drp:1;
+		uint64_t pre_strp:1;
+		uint64_t pre_chk:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xx;
+	struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xx;
+	struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_frm_max {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_frm_max_s {
+		uint64_t reserved_16_63:48;
+		uint64_t len:16;
+	} s;
+	struct cvmx_agl_gmx_rxx_frm_max_s cn52xx;
+	struct cvmx_agl_gmx_rxx_frm_max_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_frm_max_s cn56xx;
+	struct cvmx_agl_gmx_rxx_frm_max_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_frm_min {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_frm_min_s {
+		uint64_t reserved_16_63:48;
+		uint64_t len:16;
+	} s;
+	struct cvmx_agl_gmx_rxx_frm_min_s cn52xx;
+	struct cvmx_agl_gmx_rxx_frm_min_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_frm_min_s cn56xx;
+	struct cvmx_agl_gmx_rxx_frm_min_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_ifg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_ifg_s {
+		uint64_t reserved_4_63:60;
+		uint64_t ifg:4;
+	} s;
+	struct cvmx_agl_gmx_rxx_ifg_s cn52xx;
+	struct cvmx_agl_gmx_rxx_ifg_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_ifg_s cn56xx;
+	struct cvmx_agl_gmx_rxx_ifg_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_int_en {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_int_en_s {
+		uint64_t reserved_20_63:44;
+		uint64_t pause_drp:1;
+		uint64_t reserved_16_18:3;
+		uint64_t ifgerr:1;
+		uint64_t coldet:1;
+		uint64_t falerr:1;
+		uint64_t rsverr:1;
+		uint64_t pcterr:1;
+		uint64_t ovrerr:1;
+		uint64_t reserved_9_9:1;
+		uint64_t skperr:1;
+		uint64_t rcverr:1;
+		uint64_t lenerr:1;
+		uint64_t alnerr:1;
+		uint64_t fcserr:1;
+		uint64_t jabber:1;
+		uint64_t maxerr:1;
+		uint64_t reserved_1_1:1;
+		uint64_t minerr:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_int_en_s cn52xx;
+	struct cvmx_agl_gmx_rxx_int_en_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_int_en_s cn56xx;
+	struct cvmx_agl_gmx_rxx_int_en_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_int_reg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_int_reg_s {
+		uint64_t reserved_20_63:44;
+		uint64_t pause_drp:1;
+		uint64_t reserved_16_18:3;
+		uint64_t ifgerr:1;
+		uint64_t coldet:1;
+		uint64_t falerr:1;
+		uint64_t rsverr:1;
+		uint64_t pcterr:1;
+		uint64_t ovrerr:1;
+		uint64_t reserved_9_9:1;
+		uint64_t skperr:1;
+		uint64_t rcverr:1;
+		uint64_t lenerr:1;
+		uint64_t alnerr:1;
+		uint64_t fcserr:1;
+		uint64_t jabber:1;
+		uint64_t maxerr:1;
+		uint64_t reserved_1_1:1;
+		uint64_t minerr:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_int_reg_s cn52xx;
+	struct cvmx_agl_gmx_rxx_int_reg_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_int_reg_s cn56xx;
+	struct cvmx_agl_gmx_rxx_int_reg_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_jabber {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_jabber_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt:16;
+	} s;
+	struct cvmx_agl_gmx_rxx_jabber_s cn52xx;
+	struct cvmx_agl_gmx_rxx_jabber_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_jabber_s cn56xx;
+	struct cvmx_agl_gmx_rxx_jabber_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_pause_drop_time {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_pause_drop_time_s {
+		uint64_t reserved_16_63:48;
+		uint64_t status:16;
+	} s;
+	struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xx;
+	struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xx;
+	struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_ctl_s {
+		uint64_t reserved_1_63:63;
+		uint64_t rd_clr:1;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_octs {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_octs_s {
+		uint64_t reserved_48_63:16;
+		uint64_t cnt:48;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_octs_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_octs_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_octs_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_octs_ctl_s {
+		uint64_t reserved_48_63:16;
+		uint64_t cnt:48;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_octs_dmac {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_octs_dmac_s {
+		uint64_t reserved_48_63:16;
+		uint64_t cnt:48;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_octs_drp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_octs_drp_s {
+		uint64_t reserved_48_63:16;
+		uint64_t cnt:48;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_pkts {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_pkts_s {
+		uint64_t reserved_32_63:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_pkts_bad {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_pkts_bad_s {
+		uint64_t reserved_32_63:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_pkts_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s {
+		uint64_t reserved_32_63:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_pkts_dmac {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s {
+		uint64_t reserved_32_63:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_stats_pkts_drp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_stats_pkts_drp_s {
+		uint64_t reserved_32_63:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xx;
+	struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rxx_udd_skp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rxx_udd_skp_s {
+		uint64_t reserved_9_63:55;
+		uint64_t fcssel:1;
+		uint64_t reserved_7_7:1;
+		uint64_t len:7;
+	} s;
+	struct cvmx_agl_gmx_rxx_udd_skp_s cn52xx;
+	struct cvmx_agl_gmx_rxx_udd_skp_s cn52xxp1;
+	struct cvmx_agl_gmx_rxx_udd_skp_s cn56xx;
+	struct cvmx_agl_gmx_rxx_udd_skp_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rx_bp_dropx {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rx_bp_dropx_s {
+		uint64_t reserved_6_63:58;
+		uint64_t mark:6;
+	} s;
+	struct cvmx_agl_gmx_rx_bp_dropx_s cn52xx;
+	struct cvmx_agl_gmx_rx_bp_dropx_s cn52xxp1;
+	struct cvmx_agl_gmx_rx_bp_dropx_s cn56xx;
+	struct cvmx_agl_gmx_rx_bp_dropx_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rx_bp_offx {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rx_bp_offx_s {
+		uint64_t reserved_6_63:58;
+		uint64_t mark:6;
+	} s;
+	struct cvmx_agl_gmx_rx_bp_offx_s cn52xx;
+	struct cvmx_agl_gmx_rx_bp_offx_s cn52xxp1;
+	struct cvmx_agl_gmx_rx_bp_offx_s cn56xx;
+	struct cvmx_agl_gmx_rx_bp_offx_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rx_bp_onx {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rx_bp_onx_s {
+		uint64_t reserved_9_63:55;
+		uint64_t mark:9;
+	} s;
+	struct cvmx_agl_gmx_rx_bp_onx_s cn52xx;
+	struct cvmx_agl_gmx_rx_bp_onx_s cn52xxp1;
+	struct cvmx_agl_gmx_rx_bp_onx_s cn56xx;
+	struct cvmx_agl_gmx_rx_bp_onx_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_rx_prt_info {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rx_prt_info_s {
+		uint64_t reserved_18_63:46;
+		uint64_t drop:2;
+		uint64_t reserved_2_15:14;
+		uint64_t commit:2;
+	} s;
+	struct cvmx_agl_gmx_rx_prt_info_s cn52xx;
+	struct cvmx_agl_gmx_rx_prt_info_s cn52xxp1;
+	struct cvmx_agl_gmx_rx_prt_info_cn56xx {
+		uint64_t reserved_17_63:47;
+		uint64_t drop:1;
+		uint64_t reserved_1_15:15;
+		uint64_t commit:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_rx_prt_info_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_rx_tx_status {
+	uint64_t u64;
+	struct cvmx_agl_gmx_rx_tx_status_s {
+		uint64_t reserved_6_63:58;
+		uint64_t tx:2;
+		uint64_t reserved_2_3:2;
+		uint64_t rx:2;
+	} s;
+	struct cvmx_agl_gmx_rx_tx_status_s cn52xx;
+	struct cvmx_agl_gmx_rx_tx_status_s cn52xxp1;
+	struct cvmx_agl_gmx_rx_tx_status_cn56xx {
+		uint64_t reserved_5_63:59;
+		uint64_t tx:1;
+		uint64_t reserved_1_3:3;
+		uint64_t rx:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_rx_tx_status_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_smacx {
+	uint64_t u64;
+	struct cvmx_agl_gmx_smacx_s {
+		uint64_t reserved_48_63:16;
+		uint64_t smac:48;
+	} s;
+	struct cvmx_agl_gmx_smacx_s cn52xx;
+	struct cvmx_agl_gmx_smacx_s cn52xxp1;
+	struct cvmx_agl_gmx_smacx_s cn56xx;
+	struct cvmx_agl_gmx_smacx_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_stat_bp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_stat_bp_s {
+		uint64_t reserved_17_63:47;
+		uint64_t bp:1;
+		uint64_t cnt:16;
+	} s;
+	struct cvmx_agl_gmx_stat_bp_s cn52xx;
+	struct cvmx_agl_gmx_stat_bp_s cn52xxp1;
+	struct cvmx_agl_gmx_stat_bp_s cn56xx;
+	struct cvmx_agl_gmx_stat_bp_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_append {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_append_s {
+		uint64_t reserved_4_63:60;
+		uint64_t force_fcs:1;
+		uint64_t fcs:1;
+		uint64_t pad:1;
+		uint64_t preamble:1;
+	} s;
+	struct cvmx_agl_gmx_txx_append_s cn52xx;
+	struct cvmx_agl_gmx_txx_append_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_append_s cn56xx;
+	struct cvmx_agl_gmx_txx_append_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_ctl_s {
+		uint64_t reserved_2_63:62;
+		uint64_t xsdef_en:1;
+		uint64_t xscol_en:1;
+	} s;
+	struct cvmx_agl_gmx_txx_ctl_s cn52xx;
+	struct cvmx_agl_gmx_txx_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_ctl_s cn56xx;
+	struct cvmx_agl_gmx_txx_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_min_pkt {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_min_pkt_s {
+		uint64_t reserved_8_63:56;
+		uint64_t min_size:8;
+	} s;
+	struct cvmx_agl_gmx_txx_min_pkt_s cn52xx;
+	struct cvmx_agl_gmx_txx_min_pkt_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_min_pkt_s cn56xx;
+	struct cvmx_agl_gmx_txx_min_pkt_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_pause_pkt_interval {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_pause_pkt_interval_s {
+		uint64_t reserved_16_63:48;
+		uint64_t interval:16;
+	} s;
+	struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xx;
+	struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xx;
+	struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_pause_pkt_time {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_pause_pkt_time_s {
+		uint64_t reserved_16_63:48;
+		uint64_t time:16;
+	} s;
+	struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xx;
+	struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xx;
+	struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_pause_togo {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_pause_togo_s {
+		uint64_t reserved_16_63:48;
+		uint64_t time:16;
+	} s;
+	struct cvmx_agl_gmx_txx_pause_togo_s cn52xx;
+	struct cvmx_agl_gmx_txx_pause_togo_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_pause_togo_s cn56xx;
+	struct cvmx_agl_gmx_txx_pause_togo_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_pause_zero {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_pause_zero_s {
+		uint64_t reserved_1_63:63;
+		uint64_t send:1;
+	} s;
+	struct cvmx_agl_gmx_txx_pause_zero_s cn52xx;
+	struct cvmx_agl_gmx_txx_pause_zero_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_pause_zero_s cn56xx;
+	struct cvmx_agl_gmx_txx_pause_zero_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_soft_pause {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_soft_pause_s {
+		uint64_t reserved_16_63:48;
+		uint64_t time:16;
+	} s;
+	struct cvmx_agl_gmx_txx_soft_pause_s cn52xx;
+	struct cvmx_agl_gmx_txx_soft_pause_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_soft_pause_s cn56xx;
+	struct cvmx_agl_gmx_txx_soft_pause_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat0 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat0_s {
+		uint64_t xsdef:32;
+		uint64_t xscol:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat0_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat0_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat0_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat0_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat1 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat1_s {
+		uint64_t scol:32;
+		uint64_t mcol:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat1_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat1_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat1_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat1_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat2 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat2_s {
+		uint64_t reserved_48_63:16;
+		uint64_t octs:48;
+	} s;
+	struct cvmx_agl_gmx_txx_stat2_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat2_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat2_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat2_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat3 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat3_s {
+		uint64_t reserved_32_63:32;
+		uint64_t pkts:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat3_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat3_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat3_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat3_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat4 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat4_s {
+		uint64_t hist1:32;
+		uint64_t hist0:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat4_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat4_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat4_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat4_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat5 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat5_s {
+		uint64_t hist3:32;
+		uint64_t hist2:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat5_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat5_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat5_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat5_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat6 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat6_s {
+		uint64_t hist5:32;
+		uint64_t hist4:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat6_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat6_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat6_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat6_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat7 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat7_s {
+		uint64_t hist7:32;
+		uint64_t hist6:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat7_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat7_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat7_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat7_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat8 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat8_s {
+		uint64_t mcst:32;
+		uint64_t bcst:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat8_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat8_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat8_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat8_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stat9 {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stat9_s {
+		uint64_t undflw:32;
+		uint64_t ctl:32;
+	} s;
+	struct cvmx_agl_gmx_txx_stat9_s cn52xx;
+	struct cvmx_agl_gmx_txx_stat9_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stat9_s cn56xx;
+	struct cvmx_agl_gmx_txx_stat9_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_stats_ctl {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_stats_ctl_s {
+		uint64_t reserved_1_63:63;
+		uint64_t rd_clr:1;
+	} s;
+	struct cvmx_agl_gmx_txx_stats_ctl_s cn52xx;
+	struct cvmx_agl_gmx_txx_stats_ctl_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_stats_ctl_s cn56xx;
+	struct cvmx_agl_gmx_txx_stats_ctl_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_txx_thresh {
+	uint64_t u64;
+	struct cvmx_agl_gmx_txx_thresh_s {
+		uint64_t reserved_6_63:58;
+		uint64_t cnt:6;
+	} s;
+	struct cvmx_agl_gmx_txx_thresh_s cn52xx;
+	struct cvmx_agl_gmx_txx_thresh_s cn52xxp1;
+	struct cvmx_agl_gmx_txx_thresh_s cn56xx;
+	struct cvmx_agl_gmx_txx_thresh_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_bp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_bp_s {
+		uint64_t reserved_2_63:62;
+		uint64_t bp:2;
+	} s;
+	struct cvmx_agl_gmx_tx_bp_s cn52xx;
+	struct cvmx_agl_gmx_tx_bp_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_bp_cn56xx {
+		uint64_t reserved_1_63:63;
+		uint64_t bp:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_tx_bp_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_col_attempt {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_col_attempt_s {
+		uint64_t reserved_5_63:59;
+		uint64_t limit:5;
+	} s;
+	struct cvmx_agl_gmx_tx_col_attempt_s cn52xx;
+	struct cvmx_agl_gmx_tx_col_attempt_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_col_attempt_s cn56xx;
+	struct cvmx_agl_gmx_tx_col_attempt_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_ifg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_ifg_s {
+		uint64_t reserved_8_63:56;
+		uint64_t ifg2:4;
+		uint64_t ifg1:4;
+	} s;
+	struct cvmx_agl_gmx_tx_ifg_s cn52xx;
+	struct cvmx_agl_gmx_tx_ifg_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_ifg_s cn56xx;
+	struct cvmx_agl_gmx_tx_ifg_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_int_en {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_int_en_s {
+		uint64_t reserved_18_63:46;
+		uint64_t late_col:2;
+		uint64_t reserved_14_15:2;
+		uint64_t xsdef:2;
+		uint64_t reserved_10_11:2;
+		uint64_t xscol:2;
+		uint64_t reserved_4_7:4;
+		uint64_t undflw:2;
+		uint64_t reserved_1_1:1;
+		uint64_t pko_nxa:1;
+	} s;
+	struct cvmx_agl_gmx_tx_int_en_s cn52xx;
+	struct cvmx_agl_gmx_tx_int_en_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_int_en_cn56xx {
+		uint64_t reserved_17_63:47;
+		uint64_t late_col:1;
+		uint64_t reserved_13_15:3;
+		uint64_t xsdef:1;
+		uint64_t reserved_9_11:3;
+		uint64_t xscol:1;
+		uint64_t reserved_3_7:5;
+		uint64_t undflw:1;
+		uint64_t reserved_1_1:1;
+		uint64_t pko_nxa:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_tx_int_en_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_int_reg {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_int_reg_s {
+		uint64_t reserved_18_63:46;
+		uint64_t late_col:2;
+		uint64_t reserved_14_15:2;
+		uint64_t xsdef:2;
+		uint64_t reserved_10_11:2;
+		uint64_t xscol:2;
+		uint64_t reserved_4_7:4;
+		uint64_t undflw:2;
+		uint64_t reserved_1_1:1;
+		uint64_t pko_nxa:1;
+	} s;
+	struct cvmx_agl_gmx_tx_int_reg_s cn52xx;
+	struct cvmx_agl_gmx_tx_int_reg_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_int_reg_cn56xx {
+		uint64_t reserved_17_63:47;
+		uint64_t late_col:1;
+		uint64_t reserved_13_15:3;
+		uint64_t xsdef:1;
+		uint64_t reserved_9_11:3;
+		uint64_t xscol:1;
+		uint64_t reserved_3_7:5;
+		uint64_t undflw:1;
+		uint64_t reserved_1_1:1;
+		uint64_t pko_nxa:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_tx_int_reg_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_jam {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_jam_s {
+		uint64_t reserved_8_63:56;
+		uint64_t jam:8;
+	} s;
+	struct cvmx_agl_gmx_tx_jam_s cn52xx;
+	struct cvmx_agl_gmx_tx_jam_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_jam_s cn56xx;
+	struct cvmx_agl_gmx_tx_jam_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_lfsr {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_lfsr_s {
+		uint64_t reserved_16_63:48;
+		uint64_t lfsr:16;
+	} s;
+	struct cvmx_agl_gmx_tx_lfsr_s cn52xx;
+	struct cvmx_agl_gmx_tx_lfsr_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_lfsr_s cn56xx;
+	struct cvmx_agl_gmx_tx_lfsr_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_ovr_bp {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_ovr_bp_s {
+		uint64_t reserved_10_63:54;
+		uint64_t en:2;
+		uint64_t reserved_6_7:2;
+		uint64_t bp:2;
+		uint64_t reserved_2_3:2;
+		uint64_t ign_full:2;
+	} s;
+	struct cvmx_agl_gmx_tx_ovr_bp_s cn52xx;
+	struct cvmx_agl_gmx_tx_ovr_bp_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_ovr_bp_cn56xx {
+		uint64_t reserved_9_63:55;
+		uint64_t en:1;
+		uint64_t reserved_5_7:3;
+		uint64_t bp:1;
+		uint64_t reserved_1_3:3;
+		uint64_t ign_full:1;
+	} cn56xx;
+	struct cvmx_agl_gmx_tx_ovr_bp_cn56xx cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_pause_pkt_dmac {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_pause_pkt_dmac_s {
+		uint64_t reserved_48_63:16;
+		uint64_t dmac:48;
+	} s;
+	struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xx;
+	struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xx;
+	struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xxp1;
+};
+
+union cvmx_agl_gmx_tx_pause_pkt_type {
+	uint64_t u64;
+	struct cvmx_agl_gmx_tx_pause_pkt_type_s {
+		uint64_t reserved_16_63:48;
+		uint64_t type:16;
+	} s;
+	struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xx;
+	struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xxp1;
+	struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xx;
+	struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-mixx-defs.h b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h
new file mode 100644
index 0000000..dab6dca
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h
@@ -0,0 +1,248 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_MIXX_DEFS_H__
+#define __CVMX_MIXX_DEFS_H__
+
+#define CVMX_MIXX_BIST(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100078ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_CTL(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100020ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_INTENA(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100050ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_IRCNT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100030ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_IRHWM(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100028ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_IRING1(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100010ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_IRING2(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100018ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_ISR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100048ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_ORCNT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100040ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_ORHWM(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100038ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_ORING1(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100000ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_ORING2(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100008ull + (((offset) & 1) * 2048))
+#define CVMX_MIXX_REMCNT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000100058ull + (((offset) & 1) * 2048))
+
+union cvmx_mixx_bist {
+	uint64_t u64;
+	struct cvmx_mixx_bist_s {
+		uint64_t reserved_4_63:60;
+		uint64_t mrqdat:1;
+		uint64_t ipfdat:1;
+		uint64_t irfdat:1;
+		uint64_t orfdat:1;
+	} s;
+	struct cvmx_mixx_bist_s cn52xx;
+	struct cvmx_mixx_bist_s cn52xxp1;
+	struct cvmx_mixx_bist_s cn56xx;
+	struct cvmx_mixx_bist_s cn56xxp1;
+};
+
+union cvmx_mixx_ctl {
+	uint64_t u64;
+	struct cvmx_mixx_ctl_s {
+		uint64_t reserved_8_63:56;
+		uint64_t crc_strip:1;
+		uint64_t busy:1;
+		uint64_t en:1;
+		uint64_t reset:1;
+		uint64_t lendian:1;
+		uint64_t nbtarb:1;
+		uint64_t mrq_hwm:2;
+	} s;
+	struct cvmx_mixx_ctl_s cn52xx;
+	struct cvmx_mixx_ctl_s cn52xxp1;
+	struct cvmx_mixx_ctl_s cn56xx;
+	struct cvmx_mixx_ctl_s cn56xxp1;
+};
+
+union cvmx_mixx_intena {
+	uint64_t u64;
+	struct cvmx_mixx_intena_s {
+		uint64_t reserved_7_63:57;
+		uint64_t orunena:1;
+		uint64_t irunena:1;
+		uint64_t data_drpena:1;
+		uint64_t ithena:1;
+		uint64_t othena:1;
+		uint64_t ivfena:1;
+		uint64_t ovfena:1;
+	} s;
+	struct cvmx_mixx_intena_s cn52xx;
+	struct cvmx_mixx_intena_s cn52xxp1;
+	struct cvmx_mixx_intena_s cn56xx;
+	struct cvmx_mixx_intena_s cn56xxp1;
+};
+
+union cvmx_mixx_ircnt {
+	uint64_t u64;
+	struct cvmx_mixx_ircnt_s {
+		uint64_t reserved_20_63:44;
+		uint64_t ircnt:20;
+	} s;
+	struct cvmx_mixx_ircnt_s cn52xx;
+	struct cvmx_mixx_ircnt_s cn52xxp1;
+	struct cvmx_mixx_ircnt_s cn56xx;
+	struct cvmx_mixx_ircnt_s cn56xxp1;
+};
+
+union cvmx_mixx_irhwm {
+	uint64_t u64;
+	struct cvmx_mixx_irhwm_s {
+		uint64_t reserved_40_63:24;
+		uint64_t ibplwm:20;
+		uint64_t irhwm:20;
+	} s;
+	struct cvmx_mixx_irhwm_s cn52xx;
+	struct cvmx_mixx_irhwm_s cn52xxp1;
+	struct cvmx_mixx_irhwm_s cn56xx;
+	struct cvmx_mixx_irhwm_s cn56xxp1;
+};
+
+union cvmx_mixx_iring1 {
+	uint64_t u64;
+	struct cvmx_mixx_iring1_s {
+		uint64_t reserved_60_63:4;
+		uint64_t isize:20;
+		uint64_t reserved_36_39:4;
+		uint64_t ibase:33;
+		uint64_t reserved_0_2:3;
+	} s;
+	struct cvmx_mixx_iring1_s cn52xx;
+	struct cvmx_mixx_iring1_s cn52xxp1;
+	struct cvmx_mixx_iring1_s cn56xx;
+	struct cvmx_mixx_iring1_s cn56xxp1;
+};
+
+union cvmx_mixx_iring2 {
+	uint64_t u64;
+	struct cvmx_mixx_iring2_s {
+		uint64_t reserved_52_63:12;
+		uint64_t itlptr:20;
+		uint64_t reserved_20_31:12;
+		uint64_t idbell:20;
+	} s;
+	struct cvmx_mixx_iring2_s cn52xx;
+	struct cvmx_mixx_iring2_s cn52xxp1;
+	struct cvmx_mixx_iring2_s cn56xx;
+	struct cvmx_mixx_iring2_s cn56xxp1;
+};
+
+union cvmx_mixx_isr {
+	uint64_t u64;
+	struct cvmx_mixx_isr_s {
+		uint64_t reserved_7_63:57;
+		uint64_t orun:1;
+		uint64_t irun:1;
+		uint64_t data_drp:1;
+		uint64_t irthresh:1;
+		uint64_t orthresh:1;
+		uint64_t idblovf:1;
+		uint64_t odblovf:1;
+	} s;
+	struct cvmx_mixx_isr_s cn52xx;
+	struct cvmx_mixx_isr_s cn52xxp1;
+	struct cvmx_mixx_isr_s cn56xx;
+	struct cvmx_mixx_isr_s cn56xxp1;
+};
+
+union cvmx_mixx_orcnt {
+	uint64_t u64;
+	struct cvmx_mixx_orcnt_s {
+		uint64_t reserved_20_63:44;
+		uint64_t orcnt:20;
+	} s;
+	struct cvmx_mixx_orcnt_s cn52xx;
+	struct cvmx_mixx_orcnt_s cn52xxp1;
+	struct cvmx_mixx_orcnt_s cn56xx;
+	struct cvmx_mixx_orcnt_s cn56xxp1;
+};
+
+union cvmx_mixx_orhwm {
+	uint64_t u64;
+	struct cvmx_mixx_orhwm_s {
+		uint64_t reserved_20_63:44;
+		uint64_t orhwm:20;
+	} s;
+	struct cvmx_mixx_orhwm_s cn52xx;
+	struct cvmx_mixx_orhwm_s cn52xxp1;
+	struct cvmx_mixx_orhwm_s cn56xx;
+	struct cvmx_mixx_orhwm_s cn56xxp1;
+};
+
+union cvmx_mixx_oring1 {
+	uint64_t u64;
+	struct cvmx_mixx_oring1_s {
+		uint64_t reserved_60_63:4;
+		uint64_t osize:20;
+		uint64_t reserved_36_39:4;
+		uint64_t obase:33;
+		uint64_t reserved_0_2:3;
+	} s;
+	struct cvmx_mixx_oring1_s cn52xx;
+	struct cvmx_mixx_oring1_s cn52xxp1;
+	struct cvmx_mixx_oring1_s cn56xx;
+	struct cvmx_mixx_oring1_s cn56xxp1;
+};
+
+union cvmx_mixx_oring2 {
+	uint64_t u64;
+	struct cvmx_mixx_oring2_s {
+		uint64_t reserved_52_63:12;
+		uint64_t otlptr:20;
+		uint64_t reserved_20_31:12;
+		uint64_t odbell:20;
+	} s;
+	struct cvmx_mixx_oring2_s cn52xx;
+	struct cvmx_mixx_oring2_s cn52xxp1;
+	struct cvmx_mixx_oring2_s cn56xx;
+	struct cvmx_mixx_oring2_s cn56xxp1;
+};
+
+union cvmx_mixx_remcnt {
+	uint64_t u64;
+	struct cvmx_mixx_remcnt_s {
+		uint64_t reserved_52_63:12;
+		uint64_t iremcnt:20;
+		uint64_t reserved_20_31:12;
+		uint64_t oremcnt:20;
+	} s;
+	struct cvmx_mixx_remcnt_s cn52xx;
+	struct cvmx_mixx_remcnt_s cn52xxp1;
+	struct cvmx_mixx_remcnt_s cn56xx;
+	struct cvmx_mixx_remcnt_s cn56xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-smix-defs.h b/arch/mips/include/asm/octeon/cvmx-smix-defs.h
new file mode 100644
index 0000000..9ae45fc
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-smix-defs.h
@@ -0,0 +1,178 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_SMIX_DEFS_H__
+#define __CVMX_SMIX_DEFS_H__
+
+#define CVMX_SMIX_CLK(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001818ull + (((offset) & 1) * 256))
+#define CVMX_SMIX_CMD(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001800ull + (((offset) & 1) * 256))
+#define CVMX_SMIX_EN(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001820ull + (((offset) & 1) * 256))
+#define CVMX_SMIX_RD_DAT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001810ull + (((offset) & 1) * 256))
+#define CVMX_SMIX_WR_DAT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001808ull + (((offset) & 1) * 256))
+
+union cvmx_smix_clk {
+	uint64_t u64;
+	struct cvmx_smix_clk_s {
+		uint64_t reserved_25_63:39;
+		uint64_t mode:1;
+		uint64_t reserved_21_23:3;
+		uint64_t sample_hi:5;
+		uint64_t sample_mode:1;
+		uint64_t reserved_14_14:1;
+		uint64_t clk_idle:1;
+		uint64_t preamble:1;
+		uint64_t sample:4;
+		uint64_t phase:8;
+	} s;
+	struct cvmx_smix_clk_cn30xx {
+		uint64_t reserved_21_63:43;
+		uint64_t sample_hi:5;
+		uint64_t reserved_14_15:2;
+		uint64_t clk_idle:1;
+		uint64_t preamble:1;
+		uint64_t sample:4;
+		uint64_t phase:8;
+	} cn30xx;
+	struct cvmx_smix_clk_cn30xx cn31xx;
+	struct cvmx_smix_clk_cn30xx cn38xx;
+	struct cvmx_smix_clk_cn30xx cn38xxp2;
+	struct cvmx_smix_clk_cn50xx {
+		uint64_t reserved_25_63:39;
+		uint64_t mode:1;
+		uint64_t reserved_21_23:3;
+		uint64_t sample_hi:5;
+		uint64_t reserved_14_15:2;
+		uint64_t clk_idle:1;
+		uint64_t preamble:1;
+		uint64_t sample:4;
+		uint64_t phase:8;
+	} cn50xx;
+	struct cvmx_smix_clk_s cn52xx;
+	struct cvmx_smix_clk_cn50xx cn52xxp1;
+	struct cvmx_smix_clk_s cn56xx;
+	struct cvmx_smix_clk_cn50xx cn56xxp1;
+	struct cvmx_smix_clk_cn30xx cn58xx;
+	struct cvmx_smix_clk_cn30xx cn58xxp1;
+};
+
+union cvmx_smix_cmd {
+	uint64_t u64;
+	struct cvmx_smix_cmd_s {
+		uint64_t reserved_18_63:46;
+		uint64_t phy_op:2;
+		uint64_t reserved_13_15:3;
+		uint64_t phy_adr:5;
+		uint64_t reserved_5_7:3;
+		uint64_t reg_adr:5;
+	} s;
+	struct cvmx_smix_cmd_cn30xx {
+		uint64_t reserved_17_63:47;
+		uint64_t phy_op:1;
+		uint64_t reserved_13_15:3;
+		uint64_t phy_adr:5;
+		uint64_t reserved_5_7:3;
+		uint64_t reg_adr:5;
+	} cn30xx;
+	struct cvmx_smix_cmd_cn30xx cn31xx;
+	struct cvmx_smix_cmd_cn30xx cn38xx;
+	struct cvmx_smix_cmd_cn30xx cn38xxp2;
+	struct cvmx_smix_cmd_s cn50xx;
+	struct cvmx_smix_cmd_s cn52xx;
+	struct cvmx_smix_cmd_s cn52xxp1;
+	struct cvmx_smix_cmd_s cn56xx;
+	struct cvmx_smix_cmd_s cn56xxp1;
+	struct cvmx_smix_cmd_cn30xx cn58xx;
+	struct cvmx_smix_cmd_cn30xx cn58xxp1;
+};
+
+union cvmx_smix_en {
+	uint64_t u64;
+	struct cvmx_smix_en_s {
+		uint64_t reserved_1_63:63;
+		uint64_t en:1;
+	} s;
+	struct cvmx_smix_en_s cn30xx;
+	struct cvmx_smix_en_s cn31xx;
+	struct cvmx_smix_en_s cn38xx;
+	struct cvmx_smix_en_s cn38xxp2;
+	struct cvmx_smix_en_s cn50xx;
+	struct cvmx_smix_en_s cn52xx;
+	struct cvmx_smix_en_s cn52xxp1;
+	struct cvmx_smix_en_s cn56xx;
+	struct cvmx_smix_en_s cn56xxp1;
+	struct cvmx_smix_en_s cn58xx;
+	struct cvmx_smix_en_s cn58xxp1;
+};
+
+union cvmx_smix_rd_dat {
+	uint64_t u64;
+	struct cvmx_smix_rd_dat_s {
+		uint64_t reserved_18_63:46;
+		uint64_t pending:1;
+		uint64_t val:1;
+		uint64_t dat:16;
+	} s;
+	struct cvmx_smix_rd_dat_s cn30xx;
+	struct cvmx_smix_rd_dat_s cn31xx;
+	struct cvmx_smix_rd_dat_s cn38xx;
+	struct cvmx_smix_rd_dat_s cn38xxp2;
+	struct cvmx_smix_rd_dat_s cn50xx;
+	struct cvmx_smix_rd_dat_s cn52xx;
+	struct cvmx_smix_rd_dat_s cn52xxp1;
+	struct cvmx_smix_rd_dat_s cn56xx;
+	struct cvmx_smix_rd_dat_s cn56xxp1;
+	struct cvmx_smix_rd_dat_s cn58xx;
+	struct cvmx_smix_rd_dat_s cn58xxp1;
+};
+
+union cvmx_smix_wr_dat {
+	uint64_t u64;
+	struct cvmx_smix_wr_dat_s {
+		uint64_t reserved_18_63:46;
+		uint64_t pending:1;
+		uint64_t val:1;
+		uint64_t dat:16;
+	} s;
+	struct cvmx_smix_wr_dat_s cn30xx;
+	struct cvmx_smix_wr_dat_s cn31xx;
+	struct cvmx_smix_wr_dat_s cn38xx;
+	struct cvmx_smix_wr_dat_s cn38xxp2;
+	struct cvmx_smix_wr_dat_s cn50xx;
+	struct cvmx_smix_wr_dat_s cn52xx;
+	struct cvmx_smix_wr_dat_s cn52xxp1;
+	struct cvmx_smix_wr_dat_s cn56xx;
+	struct cvmx_smix_wr_dat_s cn56xxp1;
+	struct cvmx_smix_wr_dat_s cn58xx;
+	struct cvmx_smix_wr_dat_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index cac9b1a..4d0a8c6 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -47,6 +47,7 @@ struct octeon_cop2_state;
 extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state);
 extern void octeon_crypto_disable(struct octeon_cop2_state *state,
 				  unsigned long flags);
+extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task);
 
 extern void octeon_init_cvmcount(void);
 
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index d6eb613..1854336 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -390,6 +390,19 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
 #include <asm-generic/pgtable.h>
 
 /*
+ * uncached accelerated TLB map for video memory access
+ */
+#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+		unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+		unsigned long size, pgprot_t *vma_prot);
+#endif
+
+/*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.
  */
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
index bfce5c7..63741ca 100644
--- a/arch/mips/include/asm/sgialib.h
+++ b/arch/mips/include/asm/sgialib.h
@@ -85,8 +85,7 @@ extern void prom_identify_arch(void);
 extern PCHAR ArcGetEnvironmentVariable(PCHAR name);
 extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
 
-/* ARCS command line acquisition and parsing. */
-extern char *prom_getcmdline(void);
+/* ARCS command line parsing. */
 extern void prom_init_cmdline(void);
 
 /* Acquiring info about the current time, etc. */
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index db0fa7b..3b6da33 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -51,9 +51,6 @@
 		LONG_S	v1, PT_ACX(sp)
 #else
 		mfhi	v1
-		LONG_S	v1, PT_HI(sp)
-		mflo	v1
-		LONG_S	v1, PT_LO(sp)
 #endif
 #ifdef CONFIG_32BIT
 		LONG_S	$8, PT_R8(sp)
@@ -62,10 +59,17 @@
 		LONG_S	$10, PT_R10(sp)
 		LONG_S	$11, PT_R11(sp)
 		LONG_S	$12, PT_R12(sp)
+#ifndef CONFIG_CPU_HAS_SMARTMIPS
+		LONG_S	v1, PT_HI(sp)
+		mflo	v1
+#endif
 		LONG_S	$13, PT_R13(sp)
 		LONG_S	$14, PT_R14(sp)
 		LONG_S	$15, PT_R15(sp)
 		LONG_S	$24, PT_R24(sp)
+#ifndef CONFIG_CPU_HAS_SMARTMIPS
+		LONG_S	v1, PT_LO(sp)
+#endif
 		.endm
 
 		.macro	SAVE_STATIC
@@ -83,15 +87,19 @@
 #ifdef CONFIG_SMP
 #ifdef CONFIG_MIPS_MT_SMTC
 #define PTEBASE_SHIFT	19	/* TCBIND */
+#define CPU_ID_REG CP0_TCBIND
+#define CPU_ID_MFC0 mfc0
+#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#define PTEBASE_SHIFT	48	/* XCONTEXT */
+#define CPU_ID_REG CP0_XCONTEXT
+#define CPU_ID_MFC0 MFC0
 #else
 #define PTEBASE_SHIFT	23	/* CONTEXT */
+#define CPU_ID_REG CP0_CONTEXT
+#define CPU_ID_MFC0 MFC0
 #endif
 		.macro	get_saved_sp	/* SMP variation */
-#ifdef CONFIG_MIPS_MT_SMTC
-		mfc0	k0, CP0_TCBIND
-#else
-		MFC0	k0, CP0_CONTEXT
-#endif
+		CPU_ID_MFC0	k0, CPU_ID_REG
 #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		lui	k1, %hi(kernelsp)
 #else
@@ -107,11 +115,7 @@
 		.endm
 
 		.macro	set_saved_sp stackp temp temp2
-#ifdef CONFIG_MIPS_MT_SMTC
-		mfc0	\temp, CP0_TCBIND
-#else
-		MFC0	\temp, CP0_CONTEXT
-#endif
+		CPU_ID_MFC0	\temp, CPU_ID_REG
 		LONG_SRL	\temp, PTEBASE_SHIFT
 		LONG_S	\stackp, kernelsp(\temp)
 		.endm
@@ -166,7 +170,6 @@
 		LONG_S	$0, PT_R0(sp)
 		mfc0	v1, CP0_STATUS
 		LONG_S	$2, PT_R2(sp)
-		LONG_S	v1, PT_STATUS(sp)
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * Ideally, these instructions would be shuffled in
@@ -178,20 +181,21 @@
 		LONG_S	v1, PT_TCSTATUS(sp)
 #endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_S	$4, PT_R4(sp)
-		mfc0	v1, CP0_CAUSE
 		LONG_S	$5, PT_R5(sp)
-		LONG_S	v1, PT_CAUSE(sp)
+		LONG_S	v1, PT_STATUS(sp)
+		mfc0	v1, CP0_CAUSE
 		LONG_S	$6, PT_R6(sp)
-		MFC0	v1, CP0_EPC
 		LONG_S	$7, PT_R7(sp)
+		LONG_S	v1, PT_CAUSE(sp)
+		MFC0	v1, CP0_EPC
 #ifdef CONFIG_64BIT
 		LONG_S	$8, PT_R8(sp)
 		LONG_S	$9, PT_R9(sp)
 #endif
-		LONG_S	v1, PT_EPC(sp)
 		LONG_S	$25, PT_R25(sp)
 		LONG_S	$28, PT_R28(sp)
 		LONG_S	$31, PT_R31(sp)
+		LONG_S	v1, PT_EPC(sp)
 		ori	$28, sp, _THREAD_MASK
 		xori	$28, _THREAD_MASK
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index eecd2a9..9326af5 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -2,14 +2,17 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
-CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
-
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o watch.o
 
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
+endif
+
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K_LIB)	+= cevt-r4k.o
 obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
@@ -19,6 +22,7 @@ obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
 obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
+obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
 obj-$(CONFIG_CSRC_R4K_LIB)	+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
@@ -26,6 +30,8 @@ obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
+obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
+
 obj-$(CONFIG_CPU_LOONGSON2)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_MIPS32)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_MIPS64)	+= r4k_fpu.o r4k_switch.o
@@ -92,4 +98,8 @@ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n
 
 obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
+obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
+
 EXTRA_CFLAGS += -Werror
+
+CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7a51866..80e202e 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -16,6 +16,7 @@
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 #include <linux/stddef.h>
+#include <linux/module.h>
 
 #include <asm/bugs.h>
 #include <asm/cpu.h>
@@ -32,6 +33,7 @@
  * the CPU very much.
  */
 void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
 
 static void r3081_wait(void)
 {
diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig
new file mode 100644
index 0000000..58c601e
--- /dev/null
+++ b/arch/mips/kernel/cpufreq/Kconfig
@@ -0,0 +1,41 @@
+#
+# CPU Frequency scaling
+#
+
+config MIPS_EXTERNAL_TIMER
+	bool
+
+config MIPS_CPUFREQ
+	bool
+	default y
+	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+
+if MIPS_CPUFREQ
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config LOONGSON2_CPUFREQ
+	tristate "Loongson2 CPUFreq Driver"
+	select CPU_FREQ_TABLE
+	depends on MIPS_CPUFREQ
+	help
+	  This option adds a CPUFreq driver for loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson2F and it's successors support this feature.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+endif	# CPU_FREQ
+
+endmenu
+
+endif	# MIPS_CPUFREQ
diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile
new file mode 100644
index 0000000..c3479a43
--- /dev/null
+++ b/arch/mips/kernel/cpufreq/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Linux/MIPS cpufreq.
+#
+
+obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c
new file mode 100644
index 0000000..d7ca256
--- /dev/null
+++ b/arch/mips/kernel/cpufreq/loongson2_clock.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/platform_device.h>
+
+#include <asm/clock.h>
+
+#include <loongson.h>
+
+static LIST_HEAD(clock_list);
+static DEFINE_SPINLOCK(clock_lock);
+static DEFINE_MUTEX(clock_list_sem);
+
+/* Minimum CLK support */
+enum {
+	DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
+	DC_87PT, DC_DISABLE, DC_RESV
+};
+
+struct cpufreq_frequency_table loongson2_clockmod_table[] = {
+	{DC_RESV, CPUFREQ_ENTRY_INVALID},
+	{DC_ZERO, CPUFREQ_ENTRY_INVALID},
+	{DC_25PT, 0},
+	{DC_37PT, 0},
+	{DC_50PT, 0},
+	{DC_62PT, 0},
+	{DC_75PT, 0},
+	{DC_87PT, 0},
+	{DC_DISABLE, 0},
+	{DC_RESV, CPUFREQ_TABLE_END},
+};
+EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
+
+static struct clk cpu_clk = {
+	.name = "cpu_clk",
+	.flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+	.rate = 800000000,
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return &cpu_clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void propagate_rate(struct clk *clk)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clock_list, node) {
+		if (likely(clkp->parent != clk))
+			continue;
+		if (likely(clkp->ops && clkp->ops->recalc))
+			clkp->ops->recalc(clkp);
+		if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
+			propagate_rate(clkp);
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_set_rate_ex(clk, rate, 0);
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
+{
+	int ret = 0;
+	int regval;
+	int i;
+
+	if (likely(clk->ops && clk->ops->set_rate)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&clock_lock, flags);
+		ret = clk->ops->set_rate(clk, rate, algo_id);
+		spin_unlock_irqrestore(&clock_lock, flags);
+	}
+
+	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+		propagate_rate(clk);
+
+	for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END;
+	     i++) {
+		if (loongson2_clockmod_table[i].frequency ==
+		    CPUFREQ_ENTRY_INVALID)
+			continue;
+		if (rate == loongson2_clockmod_table[i].frequency)
+			break;
+	}
+	if (rate != loongson2_clockmod_table[i].frequency)
+		return -ENOTSUPP;
+
+	clk->rate = rate;
+
+	regval = LOONGSON_CHIPCFG0;
+	regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1);
+	LOONGSON_CHIPCFG0 = regval;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (likely(clk->ops && clk->ops->round_rate)) {
+		unsigned long flags, rounded;
+
+		spin_lock_irqsave(&clock_lock, flags);
+		rounded = clk->ops->round_rate(clk, rate);
+		spin_unlock_irqrestore(&clock_lock, flags);
+
+		return rounded;
+	}
+
+	return rate;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+/*
+ * This is the simple version of Loongson-2 wait, Maybe we need do this in
+ * interrupt disabled content
+ */
+
+DEFINE_SPINLOCK(loongson2_wait_lock);
+void loongson2_cpu_wait(void)
+{
+	u32 cpu_freq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&loongson2_wait_lock, flags);
+	cpu_freq = LOONGSON_CHIPCFG0;
+	LOONGSON_CHIPCFG0 &= ~0x7;	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG0 = cpu_freq;	/* Restore CPU state */
+	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
+}
+EXPORT_SYMBOL_GPL(loongson2_cpu_wait);
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
new file mode 100644
index 0000000..2f6a0b1
--- /dev/null
+++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
@@ -0,0 +1,227 @@
+/*
+ * Cpufreq driver for the loongson-2 processors
+ *
+ * The 2E revision of loongson processor not support this feature.
+ *
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/clock.h>
+
+#include <loongson.h>
+
+static uint nowait;
+
+static struct clk *cpuclk;
+
+static void (*saved_cpu_wait) (void);
+
+static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data);
+
+static struct notifier_block loongson2_cpufreq_notifier_block = {
+	.notifier_call = loongson2_cpu_freq_notifier
+};
+
+static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	if (val == CPUFREQ_POSTCHANGE)
+		current_cpu_data.udelay_val = loops_per_jiffy;
+
+	return 0;
+}
+
+static unsigned int loongson2_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(cpuclk);
+}
+
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
+				     unsigned int target_freq,
+				     unsigned int relation)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned int newstate = 0;
+	cpumask_t cpus_allowed;
+	struct cpufreq_freqs freqs;
+	unsigned int freq;
+
+	if (!cpu_online(cpu))
+		return -ENODEV;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	if (cpufreq_frequency_table_target
+	    (policy, &loongson2_clockmod_table[0], target_freq, relation,
+	     &newstate))
+		return -EINVAL;
+
+	freq =
+	    ((cpu_clock_freq / 1000) *
+	     loongson2_clockmod_table[newstate].index) / 8;
+	if (freq < policy->min || freq > policy->max)
+		return -EINVAL;
+
+	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
+
+	freqs.cpu = cpu;
+	freqs.old = loongson2_cpufreq_get(cpu);
+	freqs.new = freq;
+	freqs.flags = 0;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* notifiers */
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	/* setting the cpu frequency */
+	clk_set_rate(cpuclk, freq);
+
+	/* notifiers */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	pr_debug("cpufreq: set frequency %u kHz\n", freq);
+
+	return 0;
+}
+
+static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	int i;
+
+	if (!cpu_online(policy->cpu))
+		return -ENODEV;
+
+	cpuclk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(cpuclk)) {
+		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+		return PTR_ERR(cpuclk);
+	}
+
+	cpuclk->rate = cpu_clock_freq / 1000;
+	if (!cpuclk->rate)
+		return -EINVAL;
+
+	/* clock table init */
+	for (i = 2;
+	     (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END);
+	     i++)
+		loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8;
+
+	policy->cur = loongson2_cpufreq_get(policy->cpu);
+
+	cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0],
+					 policy->cpu);
+
+	return cpufreq_frequency_table_cpuinfo(policy,
+					    &loongson2_clockmod_table[0]);
+}
+
+static int loongson2_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+					      &loongson2_clockmod_table[0]);
+}
+
+static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	clk_put(cpuclk);
+	return 0;
+}
+
+static struct freq_attr *loongson2_table_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver loongson2_cpufreq_driver = {
+	.owner = THIS_MODULE,
+	.name = "loongson2",
+	.init = loongson2_cpufreq_cpu_init,
+	.verify = loongson2_cpufreq_verify,
+	.target = loongson2_cpufreq_target,
+	.get = loongson2_cpufreq_get,
+	.exit = loongson2_cpufreq_exit,
+	.attr = loongson2_table_attr,
+};
+
+static struct platform_device_id platform_device_ids[] = {
+	{
+		.name = "loongson2_cpufreq",
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(platform, platform_device_ids);
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = "loongson2_cpufreq",
+		.owner = THIS_MODULE,
+	},
+	.id_table = platform_device_ids,
+};
+
+static int __init cpufreq_init(void)
+{
+	int ret;
+
+	/* Register platform stuff */
+	ret = platform_driver_register(&platform_driver);
+	if (ret)
+		return ret;
+
+	pr_info("cpufreq: Loongson-2F CPU frequency driver.\n");
+
+	cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+
+	ret = cpufreq_register_driver(&loongson2_cpufreq_driver);
+
+	if (!ret && !nowait) {
+		saved_cpu_wait = cpu_wait;
+		cpu_wait = loongson2_cpu_wait;
+	}
+
+	return ret;
+}
+
+static void __exit cpufreq_exit(void)
+{
+	if (!nowait && saved_cpu_wait)
+		cpu_wait = saved_cpu_wait;
+	cpufreq_unregister_driver(&loongson2_cpufreq_driver);
+	cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	platform_driver_unregister(&platform_driver);
+}
+
+module_init(cpufreq_init);
+module_exit(cpufreq_exit);
+
+module_param(nowait, uint, 0644);
+MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait");
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson2F");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
new file mode 100644
index 0000000..a27c16c
--- /dev/null
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2008 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+/*
+ * The file comes from kernel/csrc-r4k.c
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h>			/* Not included in linux/time.h */
+
+#include <asm/mach-powertv/asic_regs.h>
+#include "powertv-clock.h"
+
+/* MIPS PLL Register Definitions */
+#define PLL_GET_M(x)		(((x) >> 8) & 0x000000FF)
+#define PLL_GET_N(x)		(((x) >> 16) & 0x000000FF)
+#define PLL_GET_P(x)		(((x) >> 24) & 0x00000007)
+
+/*
+ * returns:  Clock frequency in kHz
+ */
+unsigned int __init mips_get_pll_freq(void)
+{
+	unsigned int pll_reg, m, n, p;
+	unsigned int fin = 54000; /* Base frequency in kHz */
+	unsigned int fout;
+
+	/* Read PLL register setting */
+	pll_reg = asic_read(mips_pll_setup);
+	m = PLL_GET_M(pll_reg);
+	n = PLL_GET_N(pll_reg);
+	p = PLL_GET_P(pll_reg);
+	pr_info("MIPS PLL Register:0x%x  M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
+
+	/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
+	fout = ((2 * n * fin) / (m * (0x01 << p)));
+
+	pr_info("MIPS Clock Freq=%d kHz\n", fout);
+
+	return fout;
+}
+
+static cycle_t c0_hpt_read(struct clocksource *cs)
+{
+	return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+	.name		= "powertv-counter",
+	.read		= c0_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init powertv_c0_hpt_clocksource_init(void)
+{
+	unsigned int pll_freq = mips_get_pll_freq();
+
+	pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
+		(pll_freq % 1000) * 100 / 1000);
+
+	mips_hpt_frequency = pll_freq / 2 * 1000;
+
+	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+	clocksource_register(&clocksource_mips);
+}
+
+/**
+ * struct tim_c - free running counter
+ * @hi:	High 16 bits of the counter
+ * @lo:	Low 32 bits of the counter
+ *
+ * Lays out the structure of the free running counter in memory. This counter
+ * increments at a rate of 27 MHz/8 on all platforms.
+ */
+struct tim_c {
+	unsigned int hi;
+	unsigned int lo;
+};
+
+static struct tim_c *tim_c;
+
+static cycle_t tim_c_read(struct clocksource *cs)
+{
+	unsigned int hi;
+	unsigned int next_hi;
+	unsigned int lo;
+
+	hi = readl(&tim_c->hi);
+
+	for (;;) {
+		lo = readl(&tim_c->lo);
+		next_hi = readl(&tim_c->hi);
+		if (next_hi == hi)
+			break;
+		hi = next_hi;
+	}
+
+pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
+	return ((u64) hi << 32) | lo;
+}
+
+#define TIM_C_SIZE		48		/* # bits in the timer */
+
+static struct clocksource clocksource_tim_c = {
+	.name		= "powertv-tim_c",
+	.read		= tim_c_read,
+	.mask		= CLOCKSOURCE_MASK(TIM_C_SIZE),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/**
+ * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
+ *
+ * The hard part here is coming up with a constant k and shift s such that
+ * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
+ * when shifted right by s, yields the corresponding number of nanoseconds.
+ * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
+ * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
+ * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
+ * done in 64 bits, avoiding an overflow means that k must be less than
+ * 64 - 48 = 16 bits.
+ */
+static void __init powertv_tim_c_clocksource_init(void)
+{
+	int			prescale;
+	unsigned long		dividend;
+	unsigned long		k;
+	int			s;
+	const int		max_k_bits = (64 - 48) - 1;
+	const unsigned long	billion = 1000000000;
+	const unsigned long	counts_per_second = 27000000 / 8;
+
+	prescale = BITS_PER_LONG - ilog2(billion) - 1;
+	dividend = billion << prescale;
+	k = dividend / counts_per_second;
+	s = ilog2(k) - max_k_bits;
+
+	if (s < 0)
+		s = prescale;
+
+	else {
+		k >>= s;
+		s += prescale;
+	}
+
+	clocksource_tim_c.mult = k;
+	clocksource_tim_c.shift = s;
+	clocksource_tim_c.rating = 200;
+
+	clocksource_register(&clocksource_tim_c);
+	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
+}
+
+/**
+ powertv_clocksource_init - initialize all clocksources
+ */
+void __init powertv_clocksource_init(void)
+{
+	powertv_c0_hpt_clocksource_init();
+	powertv_tim_c_clocksource_init();
+}
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
new file mode 100644
index 0000000..68b0670
--- /dev/null
+++ b/arch/mips/kernel/ftrace.c
@@ -0,0 +1,275 @@
+/*
+ * Code for replacing ftrace calls with jumps.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * Thanks goes to Steven Rostedt for writing the original x86 version.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/ftrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+#define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
+#define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
+#define jump_insn_encode(op_code, addr) \
+	((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int ftrace_nop = 0x00000000;
+
+static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
+{
+	int faulted;
+
+	/* *(unsigned int *)ip = new_code; */
+	safe_store_code(new_code, ip, faulted);
+
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	flush_icache_range(ip, ip + 8);
+
+	return 0;
+}
+
+static int lui_v1;
+static int jal_mcount;
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned int new;
+	int faulted;
+	unsigned long ip = rec->ip;
+
+	/* We have compiled module with -mlong-calls, but compiled the kernel
+	 * without it, we need to cope with them respectively. */
+	if (ip & 0x40000000) {
+		/* record it for ftrace_make_call */
+		if (lui_v1 == 0) {
+			/* lui_v1 = *(unsigned int *)ip; */
+			safe_load_code(lui_v1, ip, faulted);
+
+			if (unlikely(faulted))
+				return -EFAULT;
+		}
+
+		/* lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+		 * addiu v1, v1, low_16bit_of_mcount
+		 * move at, ra
+		 * jalr v1
+		 * nop
+		 * 				     1f: (ip + 12)
+		 */
+		new = 0x10000004;
+	} else {
+		/* record/calculate it for ftrace_make_call */
+		if (jal_mcount == 0) {
+			/* We can record it directly like this:
+			 *     jal_mcount = *(unsigned int *)ip;
+			 * Herein, jump over the first two nop instructions */
+			jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
+		}
+
+		/* move at, ra
+		 * jalr v1		--> nop
+		 */
+		new = ftrace_nop;
+	}
+	return ftrace_modify_code(ip, new);
+}
+
+static int modified;	/* initialized as 0 by default */
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned int new;
+	unsigned long ip = rec->ip;
+
+	/* We just need to remove the "b ftrace_stub" at the fist time! */
+	if (modified == 0) {
+		modified = 1;
+		ftrace_modify_code(addr, ftrace_nop);
+	}
+	/* ip, module: 0xc0000000, kernel: 0x80000000 */
+	new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+
+	return ftrace_modify_code(ip, new);
+}
+
+#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call))
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned int new;
+
+	new = jump_insn_encode(JAL, (unsigned long)func);
+
+	return ftrace_modify_code(FTRACE_CALL_IP, new);
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* The return code is retured via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+#endif				/* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void ftrace_graph_call(void);
+#define JMP	0x08000000	/* jump to target directly */
+#define CALL_FTRACE_GRAPH_CALLER \
+	jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
+#define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
+				  CALL_FTRACE_GRAPH_CALLER);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+}
+
+#endif				/* !CONFIG_DYNAMIC_FTRACE */
+
+#ifndef KBUILD_MCOUNT_RA_ADDRESS
+#define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
+#define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
+#define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
+
+unsigned long ftrace_get_parent_addr(unsigned long self_addr,
+				     unsigned long parent,
+				     unsigned long parent_addr,
+				     unsigned long fp)
+{
+	unsigned long sp, ip, ra;
+	unsigned int code;
+	int faulted;
+
+	/* in module or kernel? */
+	if (self_addr & 0x40000000) {
+		/* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
+		ip = self_addr - 20;
+	} else {
+		/* kernel: move to the instruction "move ra, at" */
+		ip = self_addr - 12;
+	}
+
+	/* search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction */
+	do {
+		ip -= 4;
+
+		/* get the code at "ip": code = *(unsigned int *)ip; */
+		safe_load_code(code, ip, faulted);
+
+		if (unlikely(faulted))
+			return 0;
+
+		/* If we hit the non-store instruction before finding where the
+		 * ra is stored, then this is a leaf function and it does not
+		 * store the ra on the stack. */
+		if ((code & S_R_SP) != S_R_SP)
+			return parent_addr;
+
+	} while (((code & S_RA_SP) != S_RA_SP));
+
+	sp = fp + (code & OFFSET_MASK);
+
+	/* ra = *(unsigned long *)sp; */
+	safe_load_stack(ra, sp, faulted);
+	if (unlikely(faulted))
+		return 0;
+
+	if (ra == parent)
+		return sp;
+	return 0;
+}
+
+#endif
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long fp)
+{
+	unsigned long old;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)
+	    &return_to_handler;
+	int faulted;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/* "parent" is the stack address saved the return address of the caller
+	 * of _mcount.
+	 *
+	 * if the gcc < 4.5, a leaf function does not save the return address
+	 * in the stack address, so, we "emulate" one in _mcount's stack space,
+	 * and hijack it directly, but for a non-leaf function, it save the
+	 * return address to the its own stack space, we can not hijack it
+	 * directly, but need to find the real stack address,
+	 * ftrace_get_parent_addr() does it!
+	 *
+	 * if gcc>= 4.5, with the new -mmcount-ra-address option, for a
+	 * non-leaf function, the location of the return address will be saved
+	 * to $12 for us, and for a leaf function, only put a zero into $12. we
+	 * do it in ftrace_graph_caller of mcount.S.
+	 */
+
+	/* old = *parent; */
+	safe_load_stack(old, parent, faulted);
+	if (unlikely(faulted))
+		goto out;
+#ifndef KBUILD_MCOUNT_RA_ADDRESS
+	parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
+							 (unsigned long)parent,
+							 fp);
+	/* If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return */
+	if (parent == 0)
+		goto out;
+#endif
+	/* *parent = return_hooker; */
+	safe_store_stack(return_hooker, parent, faulted);
+	if (unlikely(faulted))
+		goto out;
+
+	if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) ==
+	    -EBUSY) {
+		*parent = old;
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent = old;
+	}
+	return;
+out:
+	ftrace_graph_stop();
+	WARN_ON(1);
+}
+#endif				/* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 8b0b418..981f86c 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
 #include <linux/kgdb.h>
+#include <linux/ftrace.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
@@ -150,3 +151,32 @@ void __init init_IRQ(void)
 		kgdb_early_setup = 1;
 #endif
 }
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+void __irq_entry do_IRQ(unsigned int irq)
+{
+	irq_enter();
+	__DO_IRQ_SMTC_HOOK(irq);
+	generic_handle_irq(irq);
+	irq_exit();
+}
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+/*
+ * To avoid inefficient and in some cases pathological re-checking of
+ * IRQ affinity, we have this variant that skips the affinity check.
+ */
+
+void __irq_entry do_IRQ_no_affinity(unsigned int irq)
+{
+	irq_enter();
+	__NO_AFFINITY_IRQ_SMTC_HOOK(irq);
+	generic_handle_irq(irq);
+	irq_exit();
+}
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
new file mode 100644
index 0000000..0a9cfdb
--- /dev/null
+++ b/arch/mips/kernel/mcount.S
@@ -0,0 +1,189 @@
+/*
+ * MIPS specific _mcount support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ *
+ * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/ftrace.h>
+
+	.text
+	.set noreorder
+	.set noat
+
+	.macro MCOUNT_SAVE_REGS
+	PTR_SUBU	sp, PT_SIZE
+	PTR_S	ra, PT_R31(sp)
+	PTR_S	AT, PT_R1(sp)
+	PTR_S	a0, PT_R4(sp)
+	PTR_S	a1, PT_R5(sp)
+	PTR_S	a2, PT_R6(sp)
+	PTR_S	a3, PT_R7(sp)
+#ifdef CONFIG_64BIT
+	PTR_S	a4, PT_R8(sp)
+	PTR_S	a5, PT_R9(sp)
+	PTR_S	a6, PT_R10(sp)
+	PTR_S	a7, PT_R11(sp)
+#endif
+	.endm
+
+	.macro MCOUNT_RESTORE_REGS
+	PTR_L	ra, PT_R31(sp)
+	PTR_L	AT, PT_R1(sp)
+	PTR_L	a0, PT_R4(sp)
+	PTR_L	a1, PT_R5(sp)
+	PTR_L	a2, PT_R6(sp)
+	PTR_L	a3, PT_R7(sp)
+#ifdef CONFIG_64BIT
+	PTR_L	a4, PT_R8(sp)
+	PTR_L	a5, PT_R9(sp)
+	PTR_L	a6, PT_R10(sp)
+	PTR_L	a7, PT_R11(sp)
+#endif
+#ifdef CONFIG_64BIT
+	PTR_ADDIU	sp, PT_SIZE
+#else
+	PTR_ADDIU	sp, (PT_SIZE + 8)
+#endif
+.endm
+
+	.macro RETURN_BACK
+	jr ra
+	 move ra, AT
+	.endm
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+NESTED(ftrace_caller, PT_SIZE, ra)
+	.globl _mcount
+_mcount:
+	b	ftrace_stub
+	 nop
+	lw	t1, function_trace_stop
+	bnez	t1, ftrace_stub
+	 nop
+
+	MCOUNT_SAVE_REGS
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+	PTR_S	t0, PT_R12(sp)	/* t0 saved the location of the return address(at) by -mmcount-ra-address */
+#endif
+
+	move	a0, ra		/* arg1: next ip, selfaddr */
+	.globl ftrace_call
+ftrace_call:
+	nop	/* a placeholder for the call to a real tracing function */
+	 move	a1, AT		/* arg2: the caller's next ip, parent */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl ftrace_graph_call
+ftrace_graph_call:
+	nop
+	 nop
+#endif
+
+	MCOUNT_RESTORE_REGS
+	.globl ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+	END(ftrace_caller)
+
+#else	/* ! CONFIG_DYNAMIC_FTRACE */
+
+NESTED(_mcount, PT_SIZE, ra)
+	lw	t1, function_trace_stop
+	bnez	t1, ftrace_stub
+	 nop
+	PTR_LA	t1, ftrace_stub
+	PTR_L	t2, ftrace_trace_function /* Prepare t2 for (1) */
+	bne	t1, t2, static_trace
+	 nop
+
+#ifdef	CONFIG_FUNCTION_GRAPH_TRACER
+	PTR_L	t3, ftrace_graph_return
+	bne	t1, t3, ftrace_graph_caller
+	 nop
+	PTR_LA	t1, ftrace_graph_entry_stub
+	PTR_L	t3, ftrace_graph_entry
+	bne	t1, t3, ftrace_graph_caller
+	 nop
+#endif
+	b	ftrace_stub
+	 nop
+
+static_trace:
+	MCOUNT_SAVE_REGS
+
+	move	a0, ra		/* arg1: next ip, selfaddr */
+	jalr	t2		/* (1) call *ftrace_trace_function */
+	 move	a1, AT		/* arg2: the caller's next ip, parent */
+
+	MCOUNT_RESTORE_REGS
+	.globl ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+	END(_mcount)
+
+#endif	/* ! CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+NESTED(ftrace_graph_caller, PT_SIZE, ra)
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)	/* load the original ra from the stack */
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+	PTR_L	t0, PT_R12(sp)	/* load the original t0 from the stack */
+#endif
+#else
+	MCOUNT_SAVE_REGS
+	move	a1, ra		/* arg2: next ip, selfaddr */
+#endif
+
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+	bnez	t0, 1f		/* non-leaf func: t0 saved the location of the return address */
+	 nop
+	PTR_LA	t0, PT_R1(sp)	/* leaf func: get the location of at(old ra) from our own stack */
+1:	move	a0, t0		/* arg1: the location of the return address */
+#else
+	PTR_LA	a0, PT_R1(sp)	/* arg1: &AT -> a0 */
+#endif
+	jal	prepare_ftrace_return
+#ifdef CONFIG_FRAME_POINTER
+	 move	a2, fp		/* arg3: frame pointer */
+#else
+#ifdef CONFIG_64BIT
+	 PTR_LA	a2, PT_SIZE(sp)
+#else
+	 PTR_LA	a2, (PT_SIZE+8)(sp)
+#endif
+#endif
+
+	MCOUNT_RESTORE_REGS
+	RETURN_BACK
+	END(ftrace_graph_caller)
+
+	.align	2
+	.globl	return_to_handler
+return_to_handler:
+	PTR_SUBU	sp, PT_SIZE
+	PTR_S	v0, PT_R2(sp)
+
+	jal	ftrace_return_to_handler
+	 PTR_S	v1, PT_R3(sp)
+
+	/* restore the real parent address: v0 -> ra */
+	move	ra, v0
+
+	PTR_L	v0, PT_R2(sp)
+	PTR_L	v1, PT_R3(sp)
+	jr	ra
+	 PTR_ADDIU	sp, PT_SIZE
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.set at
+	.set reorder
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 225755d..1d04807 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -13,6 +13,7 @@
 #include <asm/checksum.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
+#include <asm/ftrace.h>
 
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_user_nocheck_asm(char *__to,
@@ -51,3 +52,7 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck);
 EXPORT_SYMBOL(__csum_partial_copy_user);
 
 EXPORT_SYMBOL(invalid_pte_table);
+#ifdef CONFIG_FUNCTION_TRACER
+/* _mcount is defined in arch/mips/kernel/mcount.S */
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2b290d7..f9513f9 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -58,8 +58,12 @@ EXPORT_SYMBOL(mips_machtype);
 
 struct boot_mem_map boot_mem_map;
 
-static char command_line[CL_SIZE];
-       char arcs_cmdline[CL_SIZE]=CONFIG_CMDLINE;
+static char __initdata command_line[COMMAND_LINE_SIZE];
+char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
 
 /*
  * mips_io_port_base is the begin of the address space to which x86 style
@@ -166,26 +170,8 @@ static unsigned long __init init_initrd(void)
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (!initrd_start || initrd_end <= initrd_start) {
-#ifdef CONFIG_PROBE_INITRD_HEADER
-		u32 *initrd_header;
-
-		/*
-		 * See if initrd has been added to the kernel image by
-		 * arch/mips/boot/addinitrd.c. In that case a header is
-		 * prepended to initrd and is made up by 8 bytes. The first
-		 * word is a magic number and the second one is the size of
-		 * initrd.  Initrd start must be page aligned in any cases.
-		 */
-		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-		if (initrd_header[0] != 0x494E5244)
-			goto disable;
-		initrd_start = (unsigned long)(initrd_header + 2);
-		initrd_end = initrd_start + initrd_header[1];
-#else
+	if (!initrd_start || initrd_end <= initrd_start)
 		goto disable;
-#endif
-	}
 
 	if (initrd_start & ~PAGE_MASK) {
 		pr_err("initrd start must be page aligned\n");
@@ -476,8 +462,20 @@ static void __init arch_mem_init(char **cmdline_p)
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
-	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
-	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+#endif
+#else
+	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+#endif
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;
 
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 6254041..d0c68b5 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -35,6 +35,15 @@
 
 #include "signal-common.h"
 
+static int (*save_fp_context)(struct sigcontext __user *sc);
+static int (*restore_fp_context)(struct sigcontext __user *sc);
+
+extern asmlinkage int _save_fp_context(struct sigcontext __user *sc);
+extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc);
+
+extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
+
 /*
  * Horribly complicated - with the bloody RM9000 workarounds enabled
  * the signal trampolines is moving to the end of the structure so we can
@@ -709,3 +718,40 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 			key_replace_session_keyring();
 	}
 }
+
+#ifdef CONFIG_SMP
+static int smp_save_fp_context(struct sigcontext __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? _save_fp_context(sc)
+	       : fpu_emulator_save_context(sc);
+}
+
+static int smp_restore_fp_context(struct sigcontext __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? _restore_fp_context(sc)
+	       : fpu_emulator_restore_context(sc);
+}
+#endif
+
+static int signal_setup(void)
+{
+#ifdef CONFIG_SMP
+	/* For now just do the cpu_has_fpu check when the functions are invoked */
+	save_fp_context = smp_save_fp_context;
+	restore_fp_context = smp_restore_fp_context;
+#else
+	if (cpu_has_fpu) {
+		save_fp_context = _save_fp_context;
+		restore_fp_context = _restore_fp_context;
+	} else {
+		save_fp_context = fpu_emulator_save_context;
+		restore_fp_context = fpu_emulator_restore_context;
+	}
+#endif
+
+	return 0;
+}
+
+arch_initcall(signal_setup);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 2e74075..03abaf0 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -35,6 +35,15 @@
 
 #include "signal-common.h"
 
+static int (*save_fp_context32)(struct sigcontext32 __user *sc);
+static int (*restore_fp_context32)(struct sigcontext32 __user *sc);
+
+extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc);
+extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc);
+
+extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc);
+extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc);
+
 /*
  * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
  */
@@ -828,3 +837,18 @@ SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
 	info.si_code |= __SI_CHLD;
 	return copy_siginfo_to_user32(uinfo, &info);
 }
+
+static int signal32_init(void)
+{
+	if (cpu_has_fpu) {
+		save_fp_context32 = _save_fp_context32;
+		restore_fp_context32 = _restore_fp_context32;
+	} else {
+		save_fp_context32 = fpu_emulator_save_context32;
+		restore_fp_context32 = fpu_emulator_restore_context32;
+	}
+
+	return 0;
+}
+
+arch_initcall(signal32_init);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index e72e684..6cdca19 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,6 +32,7 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
+#include <linux/ftrace.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -130,7 +131,7 @@ asmlinkage __cpuinit void start_secondary(void)
 /*
  * Call into both interrupt handlers, as we share the IPI for them
  */
-void smp_call_function_interrupt(void)
+void __irq_entry smp_call_function_interrupt(void)
 {
 	irq_enter();
 	generic_smp_call_function_single_interrupt();
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a38e3ee..23499b5 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
+#include <linux/ftrace.h>
 
 #include <asm/cpu.h>
 #include <asm/processor.h>
@@ -939,23 +940,29 @@ static void ipi_call_interrupt(void)
 
 DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
-void ipi_decode(struct smtc_ipi *pipi)
+static void __irq_entry smtc_clock_tick_interrupt(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *cd;
+	int irq = MIPS_CPU_IRQ_BASE + 1;
+
+	irq_enter();
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
+	cd = &per_cpu(mips_clockevent_device, cpu);
+	cd->event_handler(cd);
+	irq_exit();
+}
+
+void ipi_decode(struct smtc_ipi *pipi)
+{
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int irq = MIPS_CPU_IRQ_BASE + 1;
 
 	smtc_ipi_nq(&freeIPIq, pipi);
 
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
-		irq_enter();
-		kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
-		cd = &per_cpu(mips_clockevent_device, cpu);
-		cd->event_handler(cd);
-		irq_exit();
+		smtc_clock_tick_interrupt();
 		break;
 
 	case LINUX_SMP_IPI:
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 0a18b4c..308e434 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -25,10 +25,12 @@
 #include <linux/ptrace.h>
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
+#include <linux/notifier.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
 #include <asm/break.h>
+#include <asm/cop2.h>
 #include <asm/cpu.h>
 #include <asm/dsp.h>
 #include <asm/fpu.h>
@@ -79,10 +81,6 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task);
-#endif
-
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -857,6 +855,44 @@ static void mt_ase_fp_affinity(void)
 #endif /* CONFIG_MIPS_MT_FPAFF */
 }
 
+/*
+ * No lock; only written during early bootup by CPU 0.
+ */
+static RAW_NOTIFIER_HEAD(cu2_chain);
+
+int __ref register_cu2_notifier(struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&cu2_chain, nb);
+}
+
+int cu2_notifier_call_chain(unsigned long val, void *v)
+{
+	return raw_notifier_call_chain(&cu2_chain, val, v);
+}
+
+static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
+        void *data)
+{
+	struct pt_regs *regs = data;
+
+	switch (action) {
+	default:
+		die_if_kernel("Unhandled kernel unaligned access or invalid "
+			      "instruction", regs);
+		/* Fall through  */
+
+	case CU2_EXCEPTION:
+		force_sig(SIGILL, current);
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block default_cu2_notifier = {
+	.notifier_call	= default_cu2_call,
+	.priority	= 0x80000000,		/* Run last  */
+};
+
 asmlinkage void do_cpu(struct pt_regs *regs)
 {
 	unsigned int __user *epc;
@@ -920,17 +956,9 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		return;
 
 	case 2:
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-		prefetch(&current->thread.cp2);
-		local_irq_save(flags);
-		KSTK_STATUS(current) |= ST0_CU2;
-		status = read_c0_status();
-		write_c0_status(status | ST0_CU2);
-		octeon_cop2_restore(&(current->thread.cp2));
-		write_c0_status(status & ~ST0_CU2);
-		local_irq_restore(flags);
-		return;
-#endif
+		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
+		break;
+
 	case 3:
 		break;
 	}
@@ -1367,77 +1395,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
 	return set_vi_srs_handler(n, addr, 0);
 }
 
-/*
- * This is used by native signal handling
- */
-asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
-asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
-
-extern asmlinkage int _save_fp_context(struct sigcontext __user *sc);
-extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc);
-
-extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
-extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
-
-#ifdef CONFIG_SMP
-static int smp_save_fp_context(struct sigcontext __user *sc)
-{
-	return raw_cpu_has_fpu
-	       ? _save_fp_context(sc)
-	       : fpu_emulator_save_context(sc);
-}
-
-static int smp_restore_fp_context(struct sigcontext __user *sc)
-{
-	return raw_cpu_has_fpu
-	       ? _restore_fp_context(sc)
-	       : fpu_emulator_restore_context(sc);
-}
-#endif
-
-static inline void signal_init(void)
-{
-#ifdef CONFIG_SMP
-	/* For now just do the cpu_has_fpu check when the functions are invoked */
-	save_fp_context = smp_save_fp_context;
-	restore_fp_context = smp_restore_fp_context;
-#else
-	if (cpu_has_fpu) {
-		save_fp_context = _save_fp_context;
-		restore_fp_context = _restore_fp_context;
-	} else {
-		save_fp_context = fpu_emulator_save_context;
-		restore_fp_context = fpu_emulator_restore_context;
-	}
-#endif
-}
-
-#ifdef CONFIG_MIPS32_COMPAT
-
-/*
- * This is used by 32-bit signal stuff on the 64-bit kernel
- */
-asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
-asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
-
-extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc);
-extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc);
-
-extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc);
-extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc);
-
-static inline void signal32_init(void)
-{
-	if (cpu_has_fpu) {
-		save_fp_context32 = _save_fp_context32;
-		restore_fp_context32 = _restore_fp_context32;
-	} else {
-		save_fp_context32 = fpu_emulator_save_context32;
-		restore_fp_context32 = fpu_emulator_restore_context32;
-	}
-}
-#endif
-
 extern void cpu_cache_init(void);
 extern void tlb_init(void);
 extern void flush_tlb_handlers(void);
@@ -1751,13 +1708,10 @@ void __init trap_init(void)
 	else
 		memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80);
 
-	signal_init();
-#ifdef CONFIG_MIPS32_COMPAT
-	signal32_init();
-#endif
-
 	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
 
 	sort_extable(__start___dbe_table, __stop___dbe_table);
+
+	register_cu2_notifier(&default_cu2_notifier);
 }
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 67bd626..69b039c 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -81,6 +81,7 @@
 #include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/byteorder.h>
+#include <asm/cop2.h>
 #include <asm/inst.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -451,17 +452,27 @@ static void emulate_load_store_insn(struct pt_regs *regs,
 		 */
 		goto sigbus;
 
+	/*
+	 * COP2 is available to implementor for application specific use.
+	 * It's up to applications to register a notifier chain and do
+	 * whatever they have to do, including possible sending of signals.
+	 */
 	case lwc2_op:
+		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
+		break;
+
 	case ldc2_op:
+		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
+		break;
+
 	case swc2_op:
+		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
+		break;
+
 	case sdc2_op:
-		/*
-		 * These are the coprocessor 2 load/stores.  The current
-		 * implementations don't use cp2 and cp2 should always be
-		 * disabled in c0_status.  So send SIGILL.
-                 * (No longer true: The Sony Praystation uses cp2 for
-                 * 3D matrix operations.  Dunno if that thingy has a MMU ...)
-		 */
+		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
+		break;
+
 	default:
 		/*
 		 * Pheeee...  We encountered an yet unknown instruction or
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 162b299..f25df73 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -46,6 +46,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
 		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index 0bb6037..8e388da 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -4,12 +4,14 @@
  * Brian Murphy <brian.murphy@eicon.com>
  *
  */
+#include <linux/bug.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/interrupt.h>
 
 #include <linux/timer.h>
@@ -38,12 +40,9 @@ static void pvc_display(unsigned long data)
 
 static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
 
-static int pvc_proc_read_line(char *page, char **start,
-			     off_t off, int count,
-			     int *eof, void *data)
+static int pvc_line_proc_show(struct seq_file *m, void *v)
 {
-	char *origpage = page;
-	int lineno = *(int *)data;
+	int lineno = *(int *)m->private;
 
 	if (lineno < 0 || lineno > PVC_NLINES) {
 		printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
@@ -51,45 +50,66 @@ static int pvc_proc_read_line(char *page, char **start,
 	}
 
 	mutex_lock(&pvc_mutex);
-	page += sprintf(page, "%s\n", pvc_lines[lineno]);
+	seq_printf(m, "%s\n", pvc_lines[lineno]);
 	mutex_unlock(&pvc_mutex);
 
-	return page - origpage;
+	return 0;
 }
 
-static int pvc_proc_write_line(struct file *file, const char *buffer,
-			   unsigned long count, void *data)
+static int pvc_line_proc_open(struct inode *inode, struct file *file)
 {
-	int origcount = count;
-	int lineno = *(int *)data;
+	return single_open(file, pvc_line_proc_show, PDE(inode)->data);
+}
 
-	if (lineno < 0 || lineno > PVC_NLINES) {
-		printk(KERN_WARNING "proc_write_line: invalid lineno %d\n",
-		       lineno);
-		return origcount;
-	}
+static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
+				   size_t count, loff_t *pos)
+{
+	int lineno = *(int *)PDE(file->f_path.dentry->d_inode)->data;
+	char kbuf[PVC_LINELEN];
+	size_t len;
+
+	BUG_ON(lineno < 0 || lineno > PVC_NLINES);
 
-	if (count > PVC_LINELEN)
-		count = PVC_LINELEN;
+	len = min(count, sizeof(kbuf) - 1);
+	if (copy_from_user(kbuf, buf, len))
+		return -EFAULT;
+	kbuf[len] = '\0';
 
-	if (buffer[count-1] == '\n')
-		count--;
+	if (len > 0 && kbuf[len - 1] == '\n')
+		len--;
 
 	mutex_lock(&pvc_mutex);
-	strncpy(pvc_lines[lineno], buffer, count);
-	pvc_lines[lineno][count] = '\0';
+	strncpy(pvc_lines[lineno], kbuf, len);
+	pvc_lines[lineno][len] = '\0';
 	mutex_unlock(&pvc_mutex);
 
 	tasklet_schedule(&pvc_display_tasklet);
 
-	return origcount;
+	return count;
 }
 
-static int pvc_proc_write_scroll(struct file *file, const char *buffer,
-			   unsigned long count, void *data)
+static const struct file_operations pvc_line_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pvc_line_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= pvc_line_proc_write,
+};
+
+static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
+				     size_t count, loff_t *pos)
 {
-	int origcount = count;
-	int cmd = simple_strtol(buffer, NULL, 10);
+	char kbuf[42];
+	size_t len;
+	int cmd;
+
+	len = min(count, sizeof(kbuf) - 1);
+	if (copy_from_user(kbuf, buf, len))
+		return -EFAULT;
+	kbuf[len] = '\0';
+
+	cmd = simple_strtol(kbuf, NULL, 10);
 
 	mutex_lock(&pvc_mutex);
 	if (scroll_interval != 0)
@@ -110,22 +130,31 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer,
 	}
 	mutex_unlock(&pvc_mutex);
 
-	return origcount;
+	return count;
 }
 
-static int pvc_proc_read_scroll(char *page, char **start,
-			     off_t off, int count,
-			     int *eof, void *data)
+static int pvc_scroll_proc_show(struct seq_file *m, void *v)
 {
-	char *origpage = page;
-
 	mutex_lock(&pvc_mutex);
-	page += sprintf(page, "%d\n", scroll_dir * scroll_interval);
+	seq_printf(m, "%d\n", scroll_dir * scroll_interval);
 	mutex_unlock(&pvc_mutex);
 
-	return page - origpage;
+	return 0;
 }
 
+static int pvc_scroll_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pvc_scroll_proc_show, NULL);
+}
+
+static const struct file_operations pvc_scroll_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pvc_scroll_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= pvc_scroll_proc_write,
+};
 
 void pvc_proc_timerfunc(unsigned long data)
 {
@@ -163,22 +192,16 @@ static int __init pvc_proc_init(void)
 		pvc_linedata[i] = i;
 	}
 	for (i = 0; i < PVC_NLINES; i++) {
-		proc_entry = create_proc_entry(pvc_linename[i], 0644,
-					       pvc_display_dir);
+		proc_entry = proc_create_data(pvc_linename[i], 0644, pvc_display_dir,
+					&pvc_line_proc_fops, &pvc_linedata[i]);
 		if (proc_entry == NULL)
 			goto error;
-
-		proc_entry->read_proc = pvc_proc_read_line;
-		proc_entry->write_proc = pvc_proc_write_line;
-		proc_entry->data = &pvc_linedata[i];
 	}
-	proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir);
+	proc_entry = proc_create("scroll", 0644, pvc_display_dir,
+				 &pvc_scroll_proc_fops);
 	if (proc_entry == NULL)
 		goto error;
 
-	proc_entry->write_proc = pvc_proc_write_scroll;
-	proc_entry->read_proc = pvc_proc_read_scroll;
-
 	init_timer(&timer);
 	timer.function = pvc_proc_timerfunc;
 
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index 6acc6cb..20fde19 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -100,8 +100,8 @@ void __init prom_init(void)
 
 	/* Get the command line */
 	if (argc > 0) {
-		strncpy(arcs_cmdline, argv[0], CL_SIZE-1);
-		arcs_cmdline[CL_SIZE-1] = '\0';
+		strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1);
+		arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0';
 	}
 
 	/* Set the I/O base address */
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 14b9a28..d87ffd0 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -204,7 +204,7 @@ static ctl_table lasat_table[] = {
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_lasat_prid,
-.	},
+	},
 #ifdef CONFIG_INET
 	{
 		.procname	= "ipaddr",
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index d450925..3df1967 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -1,31 +1,85 @@
 choice
-    prompt "Machine Type"
-    depends on MACH_LOONGSON
+	prompt "Machine Type"
+	depends on MACH_LOONGSON
 
 config LEMOTE_FULOONG2E
-    bool "Lemote Fuloong(2e) mini-PC"
-    select ARCH_SPARSEMEM_ENABLE
-    select CEVT_R4K
-    select CSRC_R4K
-    select SYS_HAS_CPU_LOONGSON2E
-    select DMA_NONCOHERENT
-    select BOOT_ELF32
-    select BOARD_SCACHE
-    select HW_HAS_PCI
-    select I8259
-    select ISA
-    select IRQ_CPU
-    select SYS_SUPPORTS_32BIT_KERNEL
-    select SYS_SUPPORTS_64BIT_KERNEL
-    select SYS_SUPPORTS_LITTLE_ENDIAN
-    select SYS_SUPPORTS_HIGHMEM
-    select SYS_HAS_EARLY_PRINTK
-    select GENERIC_HARDIRQS_NO__DO_IRQ
-    select GENERIC_ISA_DMA_SUPPORT_BROKEN
-    select CPU_HAS_WB
-    help
-      Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
-      an FPGA northbridge
-
-      Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+	bool "Lemote Fuloong(2e) mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_LOONGSON2E
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select CPU_HAS_WB
+	help
+	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+	  an FPGA northbridge
+
+	  Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_MACH2F
+	bool "Lemote Loongson 2F family machines"
+	select ARCH_SPARSEMEM_ENABLE
+	select BOARD_SCACHE
+	select BOOT_ELF32
+	select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
+	select CPU_HAS_WB
+	select CS5536
+	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
+	select DMA_NONCOHERENT
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select HW_HAS_PCI
+	select I8259
+	select IRQ_CPU
+	select ISA
+	select SYS_HAS_CPU_LOONGSON2F
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  Lemote Loongson 2F family machines utilize the 2F revision of
+	  Loongson processor and the AMD CS5536 south bridge.
+
+	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
+	  LingLoong allinone PC and so forth.
 endchoice
+
+config CS5536
+	bool
+
+config CS5536_MFGPT
+	bool "CS5536 MFGPT Timer"
+	depends on CS5536
+	select MIPS_EXTERNAL_TIMER
+	help
+	  This option enables the mfgpt0 timer of AMD CS5536.
+
+	  If you want to enable the Loongson2 CPUFreq Driver, Please enable
+	  this option at first, otherwise, You will get wrong system time.
+
+	  If unsure, say Yes.
+
+config LOONGSON_SUSPEND
+	bool
+	default y
+	depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
+
+config LOONGSON_UART_BASE
+	bool
+	default y
+	depends on EARLY_PRINTK || SERIAL_8250
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 39048c4..2b76cb0 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/
 #
 
 obj-$(CONFIG_LEMOTE_FULOONG2E)  += fuloong-2e/
+
+#
+# Lemote loongson2f family machines
+#
+
+obj-$(CONFIG_LEMOTE_MACH2F)  += lemote-2f/
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 656b3cc..7668c4d 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -3,9 +3,23 @@
 #
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
-    pci.o bonito-irq.o mem.o machtype.o
+    pci.o bonito-irq.o mem.o machtype.o platform.o
 
 #
-# Early printk support
+# Serial port support
 #
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_SERIAL_8250) += serial.o
+obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+
+#
+# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
+# space
+#
+obj-$(CONFIG_CS5536) += cs5536/
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index 3e31e7a..2dc2a4c 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -12,18 +12,19 @@
  *  option) any later version.
  */
 #include <linux/interrupt.h>
+#include <linux/compiler.h>
 
 #include <loongson.h>
 
 static inline void bonito_irq_enable(unsigned int irq)
 {
-	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
+	LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE));
 	mmiowb();
 }
 
 static inline void bonito_irq_disable(unsigned int irq)
 {
-	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
+	LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE));
 	mmiowb();
 }
 
@@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = {
 	.unmask	= bonito_irq_enable,
 };
 
-static struct irqaction dma_timeout_irqaction = {
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
 	.handler	= no_action,
 	.name		= "dma_timeout",
 };
@@ -44,8 +45,10 @@ void bonito_irq_init(void)
 {
 	u32 i;
 
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
+	for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
 		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
 
-	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
+#ifdef CONFIG_CPU_LOONGSON2E
+	setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
 }
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
index 75f1b24..7ad47f2 100644
--- a/arch/mips/loongson/common/cmdline.c
+++ b/arch/mips/loongson/common/cmdline.c
@@ -9,7 +9,7 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzj@lemote.com
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -49,4 +49,6 @@ void __init prom_init_cmdline(void)
 		strcat(arcs_cmdline, " console=ttyS0,115200");
 	if ((strstr(arcs_cmdline, "root=")) == NULL)
 		strcat(arcs_cmdline, " root=/dev/hda1");
+
+	prom_init_machtype();
 }
diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile
new file mode 100644
index 0000000..510d4cd
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for CS5536 support.
+#
+
+obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
+			cs5536_isa.o cs5536_ehci.o
+
+#
+# Enable cs5536 mfgpt Timer
+#
+obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c
new file mode 100644
index 0000000..b49485f
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c
@@ -0,0 +1,140 @@
+/*
+ * the ACC Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_acc_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			lo |= (0x03 << 8);
+		else
+			lo &= ~(0x03 << 8);
+		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_ACC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if (value & 0x01) {
+			value &= 0xfffffffc;
+			hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
+			lo = 0x000fff80 | ((value & 0x00000fff) << 20);
+			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
+		}
+		break;
+	case PCI_ACC_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		/* disable all the usb interrupt in PIC */
+		lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
+		if (value)	/* enable all the acc interrupt in PIC */
+			lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	default:
+		break;
+	}
+}
+
+u32 pci_acc_read_reg(int reg)
+{
+	u32 hi, lo;
+	u32 conf_data = 0;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+		if (((lo & 0xfff00000) || (hi & 0x000000ff))
+		    && ((hi & 0xf0000000) == 0xa0000000))
+			conf_data |= PCI_COMMAND_IO;
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if ((lo & 0x300) == 0x300)
+			conf_data |= PCI_COMMAND_MASTER;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_ACC_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_ACC_FLAG) {
+			conf_data = CS5536_ACC_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_IO;
+			lo &= ~SOFT_BAR_ACC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+			conf_data = (hi & 0x000000ff) << 12;
+			conf_data |= (lo & 0xfff00000) >> 20;
+			conf_data |= 0x01;
+			conf_data &= ~0x02;
+		}
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
new file mode 100644
index 0000000..74f9c59
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -0,0 +1,158 @@
+/*
+ * the EHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ehci_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			hi |= PCI_COMMAND_MASTER;
+		else
+			hi &= ~PCI_COMMAND_MASTER;
+
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_EHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
+		}
+		break;
+	case PCI_EHCI_LEGSMIEN_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		hi &= 0x003f0000;
+		hi |= (value & 0x3f) << 16;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	case PCI_EHCI_FLADJ_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		hi &= ~0x00003f00;
+		hi |= value & 0x00003f00;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	default:
+		break;
+	}
+}
+
+u32 pci_ehci_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		if (hi & PCI_COMMAND_MASTER)
+			conf_data |= PCI_COMMAND_MASTER;
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_EHCI_FLAG) {
+			conf_data = CS5536_EHCI_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_EHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			conf_data = lo & 0xfffff000;
+		}
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	case PCI_EHCI_LEGSMIEN_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = (hi & 0x003f0000) >> 16;
+		break;
+	case PCI_EHCI_LEGSMISTS_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = (hi & 0x3f000000) >> 24;
+		break;
+	case PCI_EHCI_FLADJ_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = hi & 0x00003f00;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
new file mode 100644
index 0000000..3f61594
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -0,0 +1,179 @@
+/*
+ * the IDE Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ide_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			lo |= (0x03 << 4);
+		else
+			lo &= ~(0x03 << 4);
+		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		value &= 0x0000ff00;
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0xffffff00;
+		hi |= (value >> 8);
+		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+		break;
+	case PCI_BAR4_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_IDE_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if (value & 0x01) {
+			lo = (value & 0xfffffff0) | 0x1;
+			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
+
+			value &= 0xfffffffc;
+			hi = 0x60000000 | ((value & 0x000ff000) >> 12);
+			lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
+			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
+		}
+		break;
+	case PCI_IDE_CFG_REG:
+		if (value == CS5536_IDE_FLASH_SIGNATURE) {
+			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+			lo |= 0x01;
+			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+		} else
+			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		break;
+	case PCI_IDE_DTC_REG:
+		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
+		break;
+	case PCI_IDE_CAST_REG:
+		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
+		break;
+	case PCI_IDE_ETC_REG:
+		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
+		break;
+	case PCI_IDE_PM_REG:
+		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
+		break;
+	default:
+		break;
+	}
+}
+
+u32 pci_ide_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+		if (lo & 0xfffffff0)
+			conf_data |= PCI_COMMAND_IO;
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if ((lo & 0x30) == 0x30)
+			conf_data |= PCI_COMMAND_MASTER;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_IDE_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0x000000f8;
+		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
+		break;
+	case PCI_BAR4_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_IDE_FLAG) {
+			conf_data = CS5536_IDE_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_IO;
+			lo &= ~SOFT_BAR_IDE_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+			conf_data = lo & 0xfffffff0;
+			conf_data |= 0x01;
+			conf_data &= ~0x02;
+		}
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
+		break;
+	case PCI_IDE_CFG_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		conf_data = lo;
+	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		conf_data = lo;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
new file mode 100644
index 0000000..b6f17f5
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -0,0 +1,316 @@
+/*
+ * the ISA Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* common variables for PCI_ISA_READ/WRITE_BAR */
+static const u32 divil_msr_reg[6] = {
+	DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
+	DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
+	DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
+};
+
+static const u32 soft_bar_flag[6] = {
+	SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
+	SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
+};
+
+static const u32 sb_msr_reg[6] = {
+	SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
+	SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
+};
+
+static const u32 bar_space_range[6] = {
+	CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
+	CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
+};
+
+static const int bar_space_len[6] = {
+	CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
+	CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
+};
+
+/*
+ * enable the divil module bar space.
+ *
+ * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
+ * and the RCONFx(0~5) reg to use the modules.
+ */
+static void divil_lbar_enable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	/*
+	 * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
+	 */
+
+	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi |= 0x01;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+	}
+}
+
+/*
+ * disable the divil module bar space.
+ */
+static void divil_lbar_disable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi &= ~0x01;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+	}
+}
+
+/*
+ * BAR write: write value to the n BAR
+ */
+
+void pci_isa_write_bar(int n, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	if (value == PCI_BAR_RANGE_MASK) {
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		lo |= soft_bar_flag[n];
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else if (value & 0x01) {
+		/* NATIVE reg */
+		hi = 0x0000f001;
+		lo &= bar_space_range[n];
+		_wrmsr(divil_msr_reg[n], hi, lo);
+
+		/* RCONFx is 4bytes in units for I/O space */
+		hi = ((value & 0x000ffffc) << 12) |
+		    ((bar_space_len[n] - 4) << 12) | 0x01;
+		lo = ((value & 0x000ffffc) << 12) | 0x01;
+		_wrmsr(sb_msr_reg[n], hi, lo);
+	}
+}
+
+/*
+ * BAR read: read the n BAR
+ */
+
+u32 pci_isa_read_bar(int n)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+	if (lo & soft_bar_flag[n]) {
+		conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
+		lo &= ~soft_bar_flag[n];
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else {
+		_rdmsr(divil_msr_reg[n], &hi, &lo);
+		conf_data = lo & bar_space_range[n];
+		conf_data |= 0x01;
+		conf_data &= ~0x02;
+	}
+	return conf_data;
+}
+
+/*
+ * isa_write: ISA write transfer
+ *
+ * We assume that this is not a bus master transfer.
+ */
+void pci_isa_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+	u32 temp;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		if (value & PCI_COMMAND_IO)
+			divil_lbar_enable();
+		else
+			divil_lbar_disable();
+		break;
+	case PCI_STATUS:
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		temp = lo & 0x0000ffff;
+		if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
+		    (lo & SB_TAS_ERR_EN))
+			temp |= SB_TAS_ERR_FLAG;
+
+		if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
+		    (lo & SB_TAR_ERR_EN))
+			temp |= SB_TAR_ERR_FLAG;
+
+		if ((value & PCI_STATUS_REC_MASTER_ABORT)
+		    && (lo & SB_MAR_ERR_EN))
+			temp |= SB_MAR_ERR_FLAG;
+
+		if ((value & PCI_STATUS_DETECTED_PARITY)
+		    && (lo & SB_PARE_ERR_EN))
+			temp |= SB_PARE_ERR_FLAG;
+
+		lo = temp;
+		_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		value &= 0x0000ff00;
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0xffffff00;
+		hi |= (value >> 8);
+		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+		break;
+	case PCI_BAR0_REG:
+		pci_isa_write_bar(0, value);
+		break;
+	case PCI_BAR1_REG:
+		pci_isa_write_bar(1, value);
+		break;
+	case PCI_BAR2_REG:
+		pci_isa_write_bar(2, value);
+		break;
+	case PCI_BAR3_REG:
+		pci_isa_write_bar(3, value);
+		break;
+	case PCI_BAR4_REG:
+		pci_isa_write_bar(4, value);
+		break;
+	case PCI_BAR5_REG:
+		pci_isa_write_bar(5, value);
+		break;
+	case PCI_UART1_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+		/* disable uart1 interrupt in PIC */
+		lo &= ~(0xf << 24);
+		if (value)	/* enable uart1 interrupt in PIC */
+			lo |= (CS5536_UART1_INTR << 24);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+		break;
+	case PCI_UART2_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+		/* disable uart2 interrupt in PIC */
+		lo &= ~(0xf << 28);
+		if (value)	/* enable uart2 interrupt in PIC */
+			lo |= (CS5536_UART2_INTR << 28);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+		break;
+	case PCI_ISA_FIXUP_REG:
+		if (value) {
+			/* enable the TARGET ABORT/MASTER ABORT etc. */
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			lo |= 0x00000063;
+			_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+		}
+
+	default:
+		/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
+		break;
+	}
+}
+
+/*
+ * isa_read: ISA read transfers
+ *
+ * We assume that this is not a bus master transfer.
+ */
+u32 pci_isa_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		/* we just check the first LBAR for the IO enable bit, */
+		/* maybe we should changed later. */
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
+		if (hi & 0x01)
+			conf_data |= PCI_COMMAND_IO;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		conf_data |= PCI_STATUS_FAST_BACK;
+
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_TAS_ERR_FLAG)
+			conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
+		if (lo & SB_TAR_ERR_FLAG)
+			conf_data |= PCI_STATUS_REC_TARGET_ABORT;
+		if (lo & SB_MAR_ERR_FLAG)
+			conf_data |= PCI_STATUS_REC_MASTER_ABORT;
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_DETECTED_PARITY;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_ISA_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0x000000f8;
+		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
+		break;
+		/*
+		 * we only use the LBAR of DIVIL, no RCONF used.
+		 * all of them are IO space.
+		 */
+	case PCI_BAR0_REG:
+		return pci_isa_read_bar(0);
+		break;
+	case PCI_BAR1_REG:
+		return pci_isa_read_bar(1);
+		break;
+	case PCI_BAR2_REG:
+		return pci_isa_read_bar(2);
+		break;
+	case PCI_BAR3_REG:
+		break;
+	case PCI_BAR4_REG:
+		return pci_isa_read_bar(4);
+		break;
+	case PCI_BAR5_REG:
+		return pci_isa_read_bar(5);
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		/* no interrupt used here */
+		conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
new file mode 100644
index 0000000..6cb44db
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -0,0 +1,217 @@
+/*
+ * CS5536 General timer functions
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu zhangjin, wuzj@lemote.com
+ *
+ * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <asm/time.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+
+DEFINE_SPINLOCK(mfgpt_lock);
+EXPORT_SYMBOL(mfgpt_lock);
+
+static u32 mfgpt_base;
+
+/*
+ * Initialize the MFGPT timer.
+ *
+ * This is also called after resume to bring the MFGPT into operation again.
+ */
+
+/* disable counter */
+void disable_mfgpt0_counter(void)
+{
+	outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(disable_mfgpt0_counter);
+
+/* enable counter, comparator2 to event mode, 14.318MHz clock */
+void enable_mfgpt0_counter(void)
+{
+	outw(0xe310, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(enable_mfgpt0_counter);
+
+static void init_mfgpt_timer(enum clock_event_mode mode,
+			     struct clock_event_device *evt)
+{
+	spin_lock(&mfgpt_lock);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		outw(COMPARE, MFGPT0_CMP2);	/* set comparator2 */
+		outw(0, MFGPT0_CNT);	/* set counter to 0 */
+		enable_mfgpt0_counter();
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
+		    evt->mode == CLOCK_EVT_MODE_ONESHOT)
+			disable_mfgpt0_counter();
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* The oneshot mode have very high deviation, Not use it! */
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+	spin_unlock(&mfgpt_lock);
+}
+
+static struct clock_event_device mfgpt_clockevent = {
+	.name = "mfgpt",
+	.features = CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode = init_mfgpt_timer,
+	.irq = CS5536_MFGPT_INTR,
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	u32 basehi;
+
+	/*
+	 * get MFGPT base address
+	 *
+	 * NOTE: do not remove me, it's need for the value of mfgpt_base is
+	 * variable
+	 */
+	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+	/* ack */
+	outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
+
+	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq5 = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+	.name = "timer"
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init setup_mfgpt0_timer(void)
+{
+	u32 basehi;
+	struct clock_event_device *cd = &mfgpt_clockevent;
+	unsigned int cpu = smp_processor_id();
+
+	cd->cpumask = cpumask_of(cpu);
+	clockevent_set_clock(cd, MFGPT_TICK_RATE);
+	cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+
+	/* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
+	_wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
+
+	/* Enable Interrupt Gate 5 */
+	_wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
+
+	/* get MFGPT base address */
+	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+	clockevents_register_device(cd);
+
+	setup_irq(CS5536_MFGPT_INTR, &irq5);
+}
+
+/*
+ * Since the MFGPT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t mfgpt_read(struct clocksource *cs)
+{
+	unsigned long flags;
+	int count;
+	u32 jifs;
+	static int old_count;
+	static u32 old_jifs;
+
+	spin_lock_irqsave(&mfgpt_lock, flags);
+	/*
+	 * Although our caller may have the read side of xtime_lock,
+	 * this is now a seqlock, and we are cheating in this routine
+	 * by having side effects on state that we cannot undo if
+	 * there is a collision on the seqlock and our caller has to
+	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
+	 * jiffies as volatile despite the lock.  We read jiffies
+	 * before latching the timer count to guarantee that although
+	 * the jiffies value might be older than the count (that is,
+	 * the counter may underflow between the last point where
+	 * jiffies was incremented and the point where we latch the
+	 * count), it cannot be newer.
+	 */
+	jifs = jiffies;
+	/* read the count */
+	count = inw(MFGPT0_CNT);
+
+	/*
+	 * It's possible for count to appear to go the wrong way for this
+	 * reason:
+	 *
+	 *  The timer counter underflows, but we haven't handled the resulting
+	 *  interrupt and incremented jiffies yet.
+	 *
+	 * Previous attempts to handle these cases intelligently were buggy, so
+	 * we just do the simple thing now.
+	 */
+	if (count < old_count && jifs == old_jifs)
+		count = old_count;
+
+	old_count = count;
+	old_jifs = jifs;
+
+	spin_unlock_irqrestore(&mfgpt_lock, flags);
+
+	return (cycle_t) (jifs * COMPARE) + count;
+}
+
+static struct clocksource clocksource_mfgpt = {
+	.name = "mfgpt",
+	.rating = 120, /* Functional for real use, but not desired */
+	.read = mfgpt_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.mult = 0,
+	.shift = 22,
+};
+
+int __init init_mfgpt_clocksource(void)
+{
+	if (num_possible_cpus() > 1)	/* MFGPT does not scale! */
+		return 0;
+
+	clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
+	return clocksource_register(&clocksource_mfgpt);
+}
+
+arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
new file mode 100644
index 0000000..8fdb02b
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -0,0 +1,147 @@
+/*
+ * the OHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ohci_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			hi |= PCI_COMMAND_MASTER;
+		else
+			hi &= ~PCI_COMMAND_MASTER;
+
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_OHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
+		}
+		break;
+	case PCI_OHCI_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
+		if (value)	/* enable all the usb interrupt in PIC */
+			lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	default:
+		break;
+	}
+}
+
+u32 pci_ohci_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+		if (hi & PCI_COMMAND_MASTER)
+			conf_data |= PCI_COMMAND_MASTER;
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_OHCI_FLAG) {
+			conf_data = CS5536_OHCI_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_OHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			conf_data = lo & 0xffffff00;
+			conf_data &= ~0x0000000f;	/* 32bit mem */
+		}
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	case PCI_OHCI_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		if ((lo & 0x00000f00) == CS5536_USB_INTR)
+			conf_data = 1;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c
new file mode 100644
index 0000000..e23f3d7
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c
@@ -0,0 +1,87 @@
+/*
+ * read/write operation to the PCI config space of CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ *	the Virtual Support Module(VSM) for virtulizing the PCI
+ *	configure space are defined in cs5536_modulename.c respectively,
+ *
+ *	after this virtulizing, user can access the PCI configure space
+ *	directly as a normal multi-function PCI device which follows
+ *	the PCI-2.2 spec.
+ */
+
+#include <linux/types.h>
+#include <cs5536/cs5536_vsm.h>
+
+enum {
+	CS5536_FUNC_START = -1,
+	CS5536_ISA_FUNC,
+	reserved_func,
+	CS5536_IDE_FUNC,
+	CS5536_ACC_FUNC,
+	CS5536_OHCI_FUNC,
+	CS5536_EHCI_FUNC,
+	CS5536_FUNC_END,
+};
+
+static const cs5536_pci_vsm_write vsm_conf_write[] = {
+	[CS5536_ISA_FUNC]	pci_isa_write_reg,
+	[reserved_func]		NULL,
+	[CS5536_IDE_FUNC]	pci_ide_write_reg,
+	[CS5536_ACC_FUNC]	pci_acc_write_reg,
+	[CS5536_OHCI_FUNC]	pci_ohci_write_reg,
+	[CS5536_EHCI_FUNC]	pci_ehci_write_reg,
+};
+
+static const cs5536_pci_vsm_read vsm_conf_read[] = {
+	[CS5536_ISA_FUNC]	pci_isa_read_reg,
+	[reserved_func]		NULL,
+	[CS5536_IDE_FUNC]	pci_ide_read_reg,
+	[CS5536_ACC_FUNC]	pci_acc_read_reg,
+	[CS5536_OHCI_FUNC]	pci_ohci_read_reg,
+	[CS5536_EHCI_FUNC]	pci_ehci_read_reg,
+};
+
+/*
+ * write to PCI config space and transfer it to MSR write.
+ */
+void cs5536_pci_conf_write4(int function, int reg, u32 value)
+{
+	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+		return;
+	if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
+		return;
+
+	if (vsm_conf_write[function] != NULL)
+		vsm_conf_write[function](reg, value);
+}
+
+/*
+ * read PCI config space and transfer it to MSR access.
+ */
+u32 cs5536_pci_conf_read4(int function, int reg)
+{
+	u32 data = 0;
+
+	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+		return 0;
+	if ((reg < 0) || ((reg & 0x03) != 0))
+		return 0;
+	if (reg > 0x100)
+		return 0xffffffff;
+
+	if (vsm_conf_read[function] != NULL)
+		data = vsm_conf_read[function](reg);
+
+	return data;
+}
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
index bc73edc..23e7a8f 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson/common/early_printk.c
@@ -1,7 +1,7 @@
 /*  early printk support
  *
  *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Copyright (c) 2009 Lemote Inc.
  *  Author: Wu Zhangjin, wuzj@lemote.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -12,26 +12,29 @@
 #include <linux/serial_reg.h>
 
 #include <loongson.h>
-#include <machine.h>
 
 #define PORT(base, offset) (u8 *)(base + offset)
 
-static inline unsigned int serial_in(phys_addr_t base, int offset)
+static inline unsigned int serial_in(unsigned char *base, int offset)
 {
 	return readb(PORT(base, offset));
 }
 
-static inline void serial_out(phys_addr_t base, int offset, int value)
+static inline void serial_out(unsigned char *base, int offset, int value)
 {
 	writeb(value, PORT(base, offset));
 }
 
 void prom_putchar(char c)
 {
-	phys_addr_t uart_base =
-		(phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8);
+	int timeout;
+	unsigned char *uart_base;
 
-	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+	uart_base = (unsigned char *)_loongson_uart_base;
+	timeout = 1024;
+
+	while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
+			(timeout-- > 0))
 		;
 
 	serial_out(uart_base, UART_TX, c);
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index b9ef503..196d947 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -17,11 +17,14 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/module.h>
+
 #include <asm/bootinfo.h>
 
 #include <loongson.h>
 
 unsigned long bus_clock, cpu_clock_freq;
+EXPORT_SYMBOL(cpu_clock_freq);
 unsigned long memsize, highmemsize;
 
 /* pmon passes arguments in 32bit pointers */
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index 3abe927..a2abd93 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzj@lemote.com
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -10,19 +10,28 @@
 
 #include <linux/bootmem.h>
 
-#include <asm/bootinfo.h>
-
 #include <loongson.h>
 
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
 void __init prom_init(void)
 {
-    /* init base address of io space */
+	/* init base address of io space */
 	set_io_port_base((unsigned long)
-		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	_loongson_addrwincfg_base = (unsigned long)
+		ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
 
 	prom_init_cmdline();
 	prom_init_env();
 	prom_init_memory();
+
+	/*init the uart base address */
+	prom_init_uart_base();
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
index b32b4a3..20e7328 100644
--- a/arch/mips/loongson/common/irq.c
+++ b/arch/mips/loongson/common/irq.c
@@ -20,21 +20,21 @@ void bonito_irqdispatch(void)
 	int i;
 
 	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
-	int_status = BONITO_INTISR;
+	int_status = LOONGSON_INTISR;
 	if (int_status & (1 << 10)) {
 		while (int_status & (1 << 10)) {
 			udelay(1);
-			int_status = BONITO_INTISR;
+			int_status = LOONGSON_INTISR;
 		}
 	}
 
 	/* Get pending sources, masked by current enables */
-	int_status = BONITO_INTISR & BONITO_INTEN;
+	int_status = LOONGSON_INTISR & LOONGSON_INTEN;
 
 	if (int_status != 0) {
 		i = __ffs(int_status);
 		int_status &= ~(1 << i);
-		do_IRQ(BONITO_IRQ_BASE + i);
+		do_IRQ(LOONGSON_IRQ_BASE + i);
 	}
 }
 
@@ -60,13 +60,13 @@ void __init arch_init_irq(void)
 	set_irq_trigger_mode();
 
 	/* no steer */
-	BONITO_INTSTEER = 0;
+	LOONGSON_INTSTEER = 0;
 
 	/*
 	 * Mask out all interrupt by writing "1" to all bit position in
 	 * the interrupt reset reg.
 	 */
-	BONITO_INTENCLR = ~0;
+	LOONGSON_INTENCLR = ~0;
 
 	/* machine specific irq init */
 	mach_init_irq();
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 7b34824..0ed52b3 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -15,6 +15,9 @@
 #include <loongson.h>
 #include <machine.h>
 
+/* please ensure the length of the machtype string is less than 50 */
+#define MACHTYPE_LEN 50
+
 static const char *system_types[] = {
 	[MACH_LOONGSON_UNKNOWN]         "unknown loongson machine",
 	[MACH_LEMOTE_FL2E]              "lemote-fuloong-2e-box",
@@ -22,29 +25,35 @@ static const char *system_types[] = {
 	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
 	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
 	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_LEMOTE_NAS]		"lemote-nas-2f",
+	[MACH_LEMOTE_LL2F]              "lemote-lynloong-2f",
 	[MACH_LOONGSON_END]             NULL,
 };
 
 const char *get_system_type(void)
 {
-	if (mips_machtype == MACH_UNKNOWN)
-		mips_machtype = LOONGSON_MACHTYPE;
-
 	return system_types[mips_machtype];
 }
 
-static __init int machtype_setup(char *str)
+void __init prom_init_machtype(void)
 {
+	char *p, str[MACHTYPE_LEN];
 	int machtype = MACH_LEMOTE_FL2E;
 
-	if (!str)
-		return -EINVAL;
+	mips_machtype = LOONGSON_MACHTYPE;
+
+	p = strstr(arcs_cmdline, "machtype=");
+	if (!p)
+		return;
+	p += strlen("machtype=");
+	strncpy(str, p, MACHTYPE_LEN);
+	p = strstr(str, " ");
+	if (p)
+		*p = '\0';
 
 	for (; system_types[machtype]; machtype++)
 		if (strstr(system_types[machtype], str)) {
 			mips_machtype = machtype;
 			break;
 		}
-	return 0;
 }
-__setup("machtype=", machtype_setup);
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index e94ef15..ceacd09 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -12,15 +12,40 @@
 
 #include <loongson.h>
 #include <mem.h>
+#include <pci.h>
 
 void __init prom_init_memory(void)
 {
     add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+    add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+			    20), BOOT_MEM_RESERVED);
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	{
+		int bit;
+
+		bit = fls(memsize + highmemsize);
+		if (bit != ffs(memsize + highmemsize))
+			bit += 20;
+		else
+			bit = bit + 20 - 1;
+
+		/* set cpu window3 to map CPU to DDR: 2G -> 2G */
+		LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+					  0x80000000ul, (1 << bit));
+		mmiowb();
+	}
+#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
 #ifdef CONFIG_64BIT
-    if (highmemsize > 0)
-	add_memory_region(LOONGSON_HIGHMEM_START,
-		highmemsize << 20, BOOT_MEM_RAM);
-#endif /* CONFIG_64BIT */
+	if (highmemsize > 0)
+		add_memory_region(LOONGSON_HIGHMEM_START,
+				  highmemsize << 20, BOOT_MEM_RAM);
+
+	add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
+			  LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+
+#endif /* !CONFIG_64BIT */
 }
 
 /* override of arch/mips/mm/cache.c: __uncached_access */
@@ -33,3 +58,61 @@ int __uncached_access(struct file *file, unsigned long addr)
 		((addr >= LOONGSON_MMIO_MEM_START) &&
 		 (addr < LOONGSON_MMIO_MEM_END));
 }
+
+#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
+
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <asm/current.h>
+
+static unsigned long uca_start, uca_end;
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	unsigned long offset = pfn << PAGE_SHIFT;
+	unsigned long end = offset + size;
+
+	if (__uncached_access(file, offset)) {
+		if (((uca_start && offset) >= uca_start) &&
+		    (end <= uca_end))
+			return __pgprot((pgprot_val(vma_prot) &
+					 ~_CACHE_MASK) |
+					_CACHE_UNCACHED_ACCELERATED);
+		else
+			return pgprot_noncached(vma_prot);
+	}
+	return vma_prot;
+}
+
+static int __init find_vga_mem_init(void)
+{
+	struct pci_dev *dev = 0;
+	struct resource *r;
+	int idx;
+
+	if (uca_start)
+		return 0;
+
+	for_each_pci_dev(dev) {
+		if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+				r = &dev->resource[idx];
+				if (!r->start && r->end)
+					continue;
+				if (r->flags & IORESOURCE_IO)
+					continue;
+				if (r->flags & IORESOURCE_MEM) {
+					uca_start = r->start;
+					uca_end = r->end;
+					return 0;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(find_vga_mem_init);
+#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index a3a4abf..31d8c5e 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -27,7 +27,7 @@ static struct resource loongson_pci_io_resource = {
 };
 
 static struct pci_controller  loongson_pci_controller = {
-	.pci_ops        = &bonito64_pci_ops,
+	.pci_ops        = &loongson_pci_ops,
 	.io_resource    = &loongson_pci_io_resource,
 	.mem_resource   = &loongson_pci_mem_resource,
 	.mem_offset     = 0x00000000UL,
@@ -44,15 +44,15 @@ static void __init setup_pcimap(void)
 	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
 	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
 	 */
-	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
-		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
-		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
-		BONITO_PCIMAP_WIN(0, 0);
+	LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
+		LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
+		LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) |
+		LOONGSON_PCIMAP_WIN(0, 0);
 
 	/*
 	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
 	 */
-	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	LOONGSON_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
 	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
 	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
 	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
@@ -67,6 +67,14 @@ static void __init setup_pcimap(void)
 	/* can not change gnt to break pci transfer when device's gnt not
 	deassert for some broken device */
 	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	/*
+	 * set cpu addr window2 to map CPU address space to PCI address space
+	 */
+	LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+		LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
 }
 
 static int __init pcibios_init(void)
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c
new file mode 100644
index 0000000..be81777
--- /dev/null
+++ b/arch/mips/loongson/common/platform.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+static struct platform_device loongson2_cpufreq_device = {
+	.name = "loongson2_cpufreq",
+	.id = -1,
+};
+
+static int __init loongson2_cpufreq_init(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* Only 2F revision and it's successors support CPUFreq */
+	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
+		return platform_device_register(&loongson2_cpufreq_device);
+
+	return -ENODEV;
+}
+
+arch_initcall(loongson2_cpufreq_init);
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c
new file mode 100644
index 0000000..b625fec
--- /dev/null
+++ b/arch/mips/loongson/common/pm.c
@@ -0,0 +1,161 @@
+/*
+ * loongson-specific suspend support
+ *
+ *  Copyright (C) 2009 Lemote Inc.
+ *  Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+
+static unsigned int __maybe_unused cached_master_mask;	/* i8259A */
+static unsigned int __maybe_unused cached_slave_mask;
+static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */
+
+void arch_suspend_disable_irqs(void)
+{
+	/* disable all mips events */
+	local_irq_disable();
+
+#ifdef CONFIG_I8259
+	/* disable all events of i8259A */
+	cached_slave_mask = inb(PIC_SLAVE_IMR);
+	cached_master_mask = inb(PIC_MASTER_IMR);
+
+	outb(0xff, PIC_SLAVE_IMR);
+	inb(PIC_SLAVE_IMR);
+	outb(0xff, PIC_MASTER_IMR);
+	inb(PIC_MASTER_IMR);
+#endif
+	/* disable all events of bonito */
+	cached_bonito_irq_mask = LOONGSON_INTEN;
+	LOONGSON_INTENCLR = 0xffff;
+	(void)LOONGSON_INTENCLR;
+}
+
+void arch_suspend_enable_irqs(void)
+{
+	/* enable all mips events */
+	local_irq_enable();
+#ifdef CONFIG_I8259
+	/* only enable the cached events of i8259A */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);
+	outb(cached_master_mask, PIC_MASTER_IMR);
+#endif
+	/* enable all cached events of bonito */
+	LOONGSON_INTENSET = cached_bonito_irq_mask;
+	(void)LOONGSON_INTENSET;
+}
+
+/*
+ * Setup the board-specific events for waking up loongson from wait mode
+ */
+void __weak setup_wakeup_events(void)
+{
+}
+
+/*
+ * Check wakeup events
+ */
+int __weak wakeup_loongson(void)
+{
+	return 1;
+}
+
+/*
+ * If the events are really what we want to wakeup the CPU, wake it up
+ * otherwise put the CPU asleep again.
+ */
+static void wait_for_wakeup_events(void)
+{
+	while (!wakeup_loongson())
+		LOONGSON_CHIPCFG0 &= ~0x7;
+}
+
+/*
+ * Stop all perf counters
+ *
+ * $24 is the control register of Loongson perf counter
+ */
+static inline void stop_perf_counters(void)
+{
+	__write_64bit_c0_register($24, 0, 0);
+}
+
+
+static void loongson_suspend_enter(void)
+{
+	static unsigned int cached_cpu_freq;
+
+	/* setup wakeup events via enabling the IRQs */
+	setup_wakeup_events();
+
+	stop_perf_counters();
+
+	cached_cpu_freq = LOONGSON_CHIPCFG0;
+
+	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG0 &= ~0x7;
+
+	/* wait for the given events to wakeup cpu from wait mode */
+	wait_for_wakeup_events();
+
+	LOONGSON_CHIPCFG0 = cached_cpu_freq;
+	mmiowb();
+}
+
+void __weak mach_suspend(void)
+{
+}
+
+void __weak mach_resume(void)
+{
+}
+
+static int loongson_pm_enter(suspend_state_t state)
+{
+	mach_suspend();
+
+	/* processor specific suspend */
+	loongson_suspend_enter();
+
+	mach_resume();
+
+	return 0;
+}
+
+static int loongson_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_ON:
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+static struct platform_suspend_ops loongson_pm_ops = {
+	.valid	= loongson_pm_valid_state,
+	.enter	= loongson_pm_enter,
+};
+
+static int __init loongson_pm_init(void)
+{
+	suspend_set_ops(&loongson_pm_ops);
+
+	return 0;
+}
+arch_initcall(loongson_pm_init);
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 97e9182..d57f171 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -22,7 +22,7 @@ static void loongson_restart(char *command)
 	mach_prepare_reboot();
 
 	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
 }
 
 static void loongson_halt(void)
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
new file mode 100644
index 0000000..23b66a5
--- /dev/null
+++ b/arch/mips/loongson/common/serial.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Yan hua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzj@lemote.com)
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(int)			\
+{								\
+	.irq		= int,					\
+	.uartclk	= 1843200,				\
+	.iotype		= UPIO_PORT,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+	.regshift	= 0,					\
+}
+
+#define PORT_M(int)				\
+{								\
+	.irq		= MIPS_CPU_IRQ_BASE + (int),		\
+	.uartclk	= 3686400,				\
+	.iotype		= UPIO_MEM,				\
+	.membase	= (void __iomem *)NULL,			\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+	.regshift	= 0,					\
+}
+
+static struct plat_serial8250_port uart8250_data[][2] = {
+	[MACH_LOONGSON_UNKNOWN]         {},
+	[MACH_LEMOTE_FL2E]              {PORT(4), {} },
+	[MACH_LEMOTE_FL2F]              {PORT(3), {} },
+	[MACH_LEMOTE_ML2F7]             {PORT_M(3), {} },
+	[MACH_LEMOTE_YL2F89]            {PORT_M(3), {} },
+	[MACH_DEXXON_GDIUM2F10]         {PORT_M(3), {} },
+	[MACH_LEMOTE_NAS]               {PORT_M(3), {} },
+	[MACH_LEMOTE_LL2F]              {PORT(3), {} },
+	[MACH_LOONGSON_END]             {},
+};
+
+static struct platform_device uart8250_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+};
+
+static int __init serial_init(void)
+{
+	unsigned char iotype;
+
+	iotype = uart8250_data[mips_machtype][0].iotype;
+
+	if (UPIO_MEM == iotype)
+		uart8250_data[mips_machtype][0].membase =
+			(void __iomem *)_loongson_uart_base;
+	else if (UPIO_PORT == iotype)
+		uart8250_data[mips_machtype][0].iobase =
+		    loongson_uart_base - LOONGSON_PCIIO_BASE;
+
+	uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
+
+	return platform_device_register(&uart8250_device);
+}
+
+device_initcall(serial_init);
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 6e08c82..35f0b66 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -14,11 +14,14 @@
 #include <asm/time.h>
 
 #include <loongson.h>
+#include <cs5536/cs5536_mfgpt.h>
 
 void __init plat_time_init(void)
 {
 	/* setup mips r4k timer */
 	mips_hpt_frequency = cpu_clock_freq / 2;
+
+	setup_mfgpt0_timer();
 }
 
 void read_persistent_clock(struct timespec *ts)
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
new file mode 100644
index 0000000..78ff66a
--- /dev/null
+++ b/arch/mips/loongson/common/uart_base.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+/* ioremapped */
+unsigned long _loongson_uart_base;
+EXPORT_SYMBOL(_loongson_uart_base);
+/* raw */
+unsigned long loongson_uart_base;
+EXPORT_SYMBOL(loongson_uart_base);
+
+void prom_init_loongson_uart_base(void)
+{
+	switch (mips_machtype) {
+	case MACH_LEMOTE_FL2E:
+		loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8;
+		break;
+	case MACH_LEMOTE_FL2F:
+	case MACH_LEMOTE_LL2F:
+		loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8;
+		break;
+	case MACH_LEMOTE_ML2F7:
+	case MACH_LEMOTE_YL2F89:
+	case MACH_DEXXON_GDIUM2F10:
+	case MACH_LEMOTE_NAS:
+	default:
+		/* The CPU provided serial port */
+		loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8;
+		break;
+	}
+
+	_loongson_uart_base =
+		(unsigned long)ioremap_nocache(loongson_uart_base, 8);
+}
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 7888cf6..320e937 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -47,8 +47,8 @@ static struct irqaction cascade_irqaction = {
 void __init set_irq_trigger_mode(void)
 {
 	/* most bonito irq should be level triggered */
-	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
-	    BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
+	LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+	    LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
 }
 
 void __init mach_init_irq(void)
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
index 677fe18..fc16c67 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -14,8 +14,8 @@
 
 void mach_prepare_reboot(void)
 {
-	BONITO_BONGENCFG &= ~(1 << 2);
-	BONITO_BONGENCFG |= (1 << 2);
+	LOONGSON_GENCFG &= ~(1 << 2);
+	LOONGSON_GENCFG |= (1 << 2);
 }
 
 void mach_prepare_shutdown(void)
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile
new file mode 100644
index 0000000..4d84b27
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for lemote loongson2f family machines
+#
+
+obj-y += irq.o reset.o ec_kb3310b.o
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
new file mode 100644
index 0000000..4d84111
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
@@ -0,0 +1,130 @@
+/*
+ * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
+ *
+ *  Copyright (C) 2008 Lemote Inc.
+ *  Author: liujl <liujl@lemote.com>, 2008-04-20
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ec_kb3310b.h"
+
+static DEFINE_SPINLOCK(index_access_lock);
+static DEFINE_SPINLOCK(port_access_lock);
+
+unsigned char ec_read(unsigned short addr)
+{
+	unsigned char value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&index_access_lock, flags);
+	outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+	outb((addr & 0x00ff), EC_IO_PORT_LOW);
+	value = inb(EC_IO_PORT_DATA);
+	spin_unlock_irqrestore(&index_access_lock, flags);
+
+	return value;
+}
+EXPORT_SYMBOL_GPL(ec_read);
+
+void ec_write(unsigned short addr, unsigned char val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&index_access_lock, flags);
+	outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+	outb((addr & 0x00ff), EC_IO_PORT_LOW);
+	outb(val, EC_IO_PORT_DATA);
+	/*  flush the write action */
+	inb(EC_IO_PORT_DATA);
+	spin_unlock_irqrestore(&index_access_lock, flags);
+
+	return;
+}
+EXPORT_SYMBOL_GPL(ec_write);
+
+/*
+ * This function is used for EC command writes and corresponding status queries.
+ */
+int ec_query_seq(unsigned char cmd)
+{
+	int timeout;
+	unsigned char status;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&port_access_lock, flags);
+
+	/* make chip goto reset mode */
+	udelay(EC_REG_DELAY);
+	outb(cmd, EC_CMD_PORT);
+	udelay(EC_REG_DELAY);
+
+	/* check if the command is received by ec */
+	timeout = EC_CMD_TIMEOUT;
+	status = inb(EC_STS_PORT);
+	while (timeout-- && (status & (1 << 1))) {
+		status = inb(EC_STS_PORT);
+		udelay(EC_REG_DELAY);
+	}
+
+	if (timeout <= 0) {
+		printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
+		ret = -EINVAL;
+	} else
+		printk(KERN_INFO
+			   "(%x/%d)ec issued command %d status : 0x%x\n",
+			   timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
+
+	spin_unlock_irqrestore(&port_access_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ec_query_seq);
+
+/*
+ * Send query command to EC to get the proper event number
+ */
+int ec_query_event_num(void)
+{
+	return ec_query_seq(CMD_GET_EVENT_NUM);
+}
+EXPORT_SYMBOL(ec_query_event_num);
+
+/*
+ * Get event number from EC
+ *
+ * NOTE: This routine must follow the query_event_num function in the
+ * interrupt.
+ */
+int ec_get_event_num(void)
+{
+	int timeout = 100;
+	unsigned char value;
+	unsigned char status;
+
+	udelay(EC_REG_DELAY);
+	status = inb(EC_STS_PORT);
+	udelay(EC_REG_DELAY);
+	while (timeout-- && !(status & (1 << 0))) {
+		status = inb(EC_STS_PORT);
+		udelay(EC_REG_DELAY);
+	}
+	if (timeout <= 0) {
+		pr_info("%s: get event number timeout.\n", __func__);
+
+		return -EINVAL;
+	}
+	value = inb(EC_DAT_PORT);
+	udelay(EC_REG_DELAY);
+
+	return value;
+}
+EXPORT_SYMBOL(ec_get_event_num);
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
new file mode 100644
index 0000000..1595a21
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -0,0 +1,188 @@
+/*
+ * KB3310B Embedded Controller
+ *
+ *  Copyright (C) 2008 Lemote Inc.
+ *  Author: liujl <liujl@lemote.com>, 2008-03-14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EC_KB3310B_H
+#define _EC_KB3310B_H
+
+extern unsigned char ec_read(unsigned short addr);
+extern void ec_write(unsigned short addr, unsigned char val);
+extern int ec_query_seq(unsigned char cmd);
+extern int ec_query_event_num(void);
+extern int ec_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+
+#define SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define	EC_IO_PORT_HIGH	0x0381
+#define	EC_IO_PORT_LOW	0x0382
+#define	EC_IO_PORT_DATA	0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define	EC_REG_DELAY	500	/* unit : us */
+#define	EC_CMD_TIMEOUT	0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define	EC_CMD_PORT		0x66
+#define	EC_STS_PORT		0x66
+#define	EC_DAT_PORT		0x62
+#define	CMD_INIT_IDLE_MODE	0xdd
+#define	CMD_EXIT_IDLE_MODE	0xdf
+#define	CMD_INIT_RESET_MODE	0xd8
+#define	CMD_REBOOT_SYSTEM	0x8c
+#define	CMD_GET_EVENT_NUM	0x84
+#define	CMD_PROGRAM_PIECE	0xda
+
+/* temperature & fan registers */
+#define	REG_TEMPERATURE_VALUE	0xF458
+#define	REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define	BIT_FAN_AUTO		0
+#define	BIT_FAN_MANUAL		1
+#define	REG_FAN_CONTROL		0xF4D2
+#define	BIT_FAN_CONTROL_ON	(1 << 0)
+#define	BIT_FAN_CONTROL_OFF	(0 << 0)
+#define	REG_FAN_STATUS		0xF4DA
+#define	BIT_FAN_STATUS_ON	(1 << 0)
+#define	BIT_FAN_STATUS_OFF	(0 << 0)
+#define	REG_FAN_SPEED_HIGH	0xFE22
+#define	REG_FAN_SPEED_LOW	0xFE23
+#define	REG_FAN_SPEED_LEVEL	0xF4CC
+/* fan speed divider */
+#define	FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define	REG_BAT_DESIGN_CAP_HIGH		0xF77D
+#define	REG_BAT_DESIGN_CAP_LOW		0xF77E
+#define	REG_BAT_FULLCHG_CAP_HIGH	0xF780
+#define	REG_BAT_FULLCHG_CAP_LOW		0xF781
+#define	REG_BAT_DESIGN_VOL_HIGH		0xF782
+#define	REG_BAT_DESIGN_VOL_LOW		0xF783
+#define	REG_BAT_CURRENT_HIGH		0xF784
+#define	REG_BAT_CURRENT_LOW		0xF785
+#define	REG_BAT_VOLTAGE_HIGH		0xF786
+#define	REG_BAT_VOLTAGE_LOW		0xF787
+#define	REG_BAT_TEMPERATURE_HIGH	0xF788
+#define	REG_BAT_TEMPERATURE_LOW		0xF789
+#define	REG_BAT_RELATIVE_CAP_HIGH	0xF492
+#define	REG_BAT_RELATIVE_CAP_LOW	0xF493
+#define	REG_BAT_VENDOR			0xF4C4
+#define	FLAG_BAT_VENDOR_SANYO		0x01
+#define	FLAG_BAT_VENDOR_SIMPLO		0x02
+#define	REG_BAT_CELL_COUNT		0xF4C6
+#define	FLAG_BAT_CELL_3S1P		0x03
+#define	FLAG_BAT_CELL_3S2P		0x06
+#define	REG_BAT_CHARGE			0xF4A2
+#define	FLAG_BAT_CHARGE_DISCHARGE	0x01
+#define	FLAG_BAT_CHARGE_CHARGE		0x02
+#define	FLAG_BAT_CHARGE_ACPOWER		0x00
+#define	REG_BAT_STATUS			0xF4B0
+#define	BIT_BAT_STATUS_LOW		(1 << 5)
+#define	BIT_BAT_STATUS_DESTROY		(1 << 2)
+#define	BIT_BAT_STATUS_FULL		(1 << 1)
+#define	BIT_BAT_STATUS_IN		(1 << 0)
+#define	REG_BAT_CHARGE_STATUS		0xF4B1
+#define	BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
+#define	BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
+#define	REG_BAT_STATE			0xF482
+#define	BIT_BAT_STATE_CHARGING		(1 << 1)
+#define	BIT_BAT_STATE_DISCHARGING	(1 << 0)
+#define	REG_BAT_POWER			0xF440
+#define	BIT_BAT_POWER_S3		(1 << 2)
+#define	BIT_BAT_POWER_ON		(1 << 1)
+#define	BIT_BAT_POWER_ACIN		(1 << 0)
+
+/* other registers */
+/* Audio: rd/wr */
+#define	REG_AUDIO_VOLUME	0xF46C
+#define	REG_AUDIO_MUTE		0xF4E7
+#define	REG_AUDIO_BEEP		0xF4D0
+/* USB port power or not: rd/wr */
+#define	REG_USB0_FLAG		0xF461
+#define	REG_USB1_FLAG		0xF462
+#define	REG_USB2_FLAG		0xF463
+#define	BIT_USB_FLAG_ON		1
+#define	BIT_USB_FLAG_OFF	0
+/* LID */
+#define	REG_LID_DETECT		0xF4BD
+#define	BIT_LID_DETECT_ON	1
+#define	BIT_LID_DETECT_OFF	0
+/* CRT */
+#define	REG_CRT_DETECT		0xF4AD
+#define	BIT_CRT_DETECT_PLUG	1
+#define	BIT_CRT_DETECT_UNPLUG	0
+/* LCD backlight brightness adjust: 9 levels */
+#define	REG_DISPLAY_BRIGHTNESS	0xF4F5
+/* Black screen Status */
+#define	BIT_DISPLAY_LCD_ON	1
+#define	BIT_DISPLAY_LCD_OFF	0
+/* LCD backlight control: off/restore */
+#define	REG_BACKLIGHT_CTRL	0xF7BD
+#define	BIT_BACKLIGHT_ON	1
+#define	BIT_BACKLIGHT_OFF	0
+/* Reset the machine auto-clear: rd/wr */
+#define	REG_RESET		0xF4EC
+#define	BIT_RESET_ON		1
+/* Light the led: rd/wr */
+#define	REG_LED			0xF4C8
+#define	BIT_LED_RED_POWER	(1 << 0)
+#define	BIT_LED_ORANGE_POWER	(1 << 1)
+#define	BIT_LED_GREEN_CHARGE	(1 << 2)
+#define	BIT_LED_RED_CHARGE	(1 << 3)
+#define	BIT_LED_NUMLOCK		(1 << 4)
+/* Test led mode, all led on/off */
+#define	REG_LED_TEST		0xF4C2
+#define	BIT_LED_TEST_IN		1
+#define	BIT_LED_TEST_OUT	0
+/* Camera on/off */
+#define	REG_CAMERA_STATUS	0xF46A
+#define	BIT_CAMERA_STATUS_ON	1
+#define	BIT_CAMERA_STATUS_OFF	0
+#define	REG_CAMERA_CONTROL	0xF7B7
+#define	BIT_CAMERA_CONTROL_OFF	0
+#define	BIT_CAMERA_CONTROL_ON	1
+/* Wlan Status */
+#define	REG_WLAN		0xF4FA
+#define	BIT_WLAN_ON		1
+#define	BIT_WLAN_OFF		0
+#define	REG_DISPLAY_LCD		0xF79F
+
+/* SCI Event Number from EC */
+enum {
+	EVENT_LID = 0x23,	/*  LID open/close */
+	EVENT_DISPLAY_TOGGLE,	/*  Fn+F3 for display switch */
+	EVENT_SLEEP,		/*  Fn+F1 for entering sleep mode */
+	EVENT_OVERTEMP,		/*  Over-temperature happened */
+	EVENT_CRT_DETECT,	/*  CRT is connected */
+	EVENT_CAMERA,		/*  Camera on/off */
+	EVENT_USB_OC2,		/*  USB2 Over Current occurred */
+	EVENT_USB_OC0,		/*  USB0 Over Current occurred */
+	EVENT_BLACK_SCREEN,	/*  Turn on/off backlight */
+	EVENT_AUDIO_MUTE,	/*  Mute on/off */
+	EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
+	EVENT_AC_BAT,		/*  AC & Battery relative issue */
+	EVENT_AUDIO_VOLUME,	/*  Volume adjust */
+	EVENT_WLAN,		/*  Wlan on/off */
+	EVENT_END
+};
+
+#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
new file mode 100644
index 0000000..77d32f9
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2007 Lemote Inc.
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7)	/* cpu timer */
+#define LOONGSON_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* cpu perf counter */
+#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* bonito */
+#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3)	/* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)	/* i8259 */
+
+#define LOONGSON_INT_BIT_INT0		(1 << 11)
+#define LOONGSON_INT_BIT_INT1		(1 << 12)
+
+/*
+ * The generic i8259_irq() make the kernel hang on booting.  Since we cannot
+ * get the irq via the IRR directly, we access the ISR instead.
+ */
+int mach_i8259_irq(void)
+{
+	int irq, isr;
+
+	irq = -1;
+
+	if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+		spin_lock(&i8259A_lock);
+		isr = inb(PIC_MASTER_CMD) &
+			~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
+		if (!isr)
+			isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
+		irq = ffs(isr) - 1;
+		if (unlikely(irq == 7)) {
+			/*
+			 * This may be a spurious interrupt.
+			 *
+			 * Read the interrupt status register (ISR). If the most
+			 * significant bit is not set then there is no valid
+			 * interrupt.
+			 */
+			outb(0x0B, PIC_MASTER_ISR);	/* ISR register */
+			if (~inb(PIC_MASTER_ISR) & 0x80)
+				irq = -1;
+		}
+		spin_unlock(&i8259A_lock);
+	}
+
+	return irq;
+}
+EXPORT_SYMBOL(mach_i8259_irq);
+
+static void i8259_irqdispatch(void)
+{
+	int irq;
+
+	irq = mach_i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(LOONGSON_TIMER_IRQ);
+	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
+#ifdef CONFIG_OPROFILE
+		do_IRQ(LOONGSON2_PERFCNT_IRQ);
+#endif
+		bonito_irqdispatch();
+	} else if (pending & CAUSEF_IP3)	/* CPU UART */
+		do_IRQ(LOONGSON_UART_IRQ);
+	else if (pending & CAUSEF_IP2)	/* South Bridge */
+		i8259_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+	/* setup cs5536 as high level trigger */
+	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+}
+
+static irqreturn_t ip6_action(int cpl, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+struct irqaction ip6_irqaction = {
+	.handler = ip6_action,
+	.name = "cascade",
+	.flags = IRQF_SHARED,
+};
+
+struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+void __init mach_init_irq(void)
+{
+	/* init all controller
+	 *   0-15         ------> i8259 interrupt
+	 *   16-23        ------> mips cpu interrupt
+	 *   32-63        ------> bonito irq
+	 */
+
+	/* Sets the first-level interrupt dispatcher. */
+	mips_cpu_irq_init();
+	init_i8259_irqs();
+	bonito_irq_init();
+
+	/* setup north bridge irq (bonito) */
+	setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+	/* setup source bridge irq (i8259) */
+	setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+}
diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c
new file mode 100644
index 0000000..d7af2e6
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/pm.c
@@ -0,0 +1,149 @@
+/*
+ *  Lemote loongson2f family machines' specific suspend support
+ *
+ *  Copyright (C) 2009 Lemote Inc.
+ *  Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/i8042.h>
+#include <linux/module.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+#include "ec_kb3310b.h"
+
+#define I8042_KBD_IRQ		1
+#define I8042_CTR_KBDINT	0x01
+#define I8042_CTR_KBDDIS	0x10
+
+static unsigned char i8042_ctr;
+
+static int i8042_enable_kbd_port(void)
+{
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
+		pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."
+		       "\n");
+		return -EIO;
+	}
+
+	i8042_ctr &= ~I8042_CTR_KBDDIS;
+	i8042_ctr |= I8042_CTR_KBDINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		i8042_ctr &= ~I8042_CTR_KBDINT;
+		i8042_ctr |= I8042_CTR_KBDDIS;
+		pr_err("i8042.c: Failed to enable KBD port.\n");
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+void setup_wakeup_events(void)
+{
+	int irq_mask;
+
+	switch (mips_machtype) {
+	case MACH_LEMOTE_ML2F7:
+	case MACH_LEMOTE_YL2F89:
+		/* open the keyboard irq in i8259A */
+		outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR);
+		irq_mask = inb(PIC_MASTER_IMR);
+
+		/* enable keyboard port */
+		i8042_enable_kbd_port();
+
+		/* Wakeup CPU via SCI lid open event */
+		outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR);
+		inb(PIC_MASTER_IMR);
+		outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR);
+		inb(PIC_SLAVE_IMR);
+
+		break;
+
+	default:
+		break;
+	}
+}
+
+static struct delayed_work lid_task;
+static int initialized;
+/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */
+sci_handler yeeloong_report_lid_status;
+EXPORT_SYMBOL(yeeloong_report_lid_status);
+static void yeeloong_lid_update_task(struct work_struct *work)
+{
+	if (yeeloong_report_lid_status)
+		yeeloong_report_lid_status(BIT_LID_DETECT_ON);
+}
+
+int wakeup_loongson(void)
+{
+	int irq;
+
+	/* query the interrupt number */
+	irq = mach_i8259_irq();
+	if (irq < 0)
+		return 0;
+
+	printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
+
+	if (irq == I8042_KBD_IRQ)
+		return 1;
+	else if (irq == SCI_IRQ_NUM) {
+		int ret, sci_event;
+		/* query the event number */
+		ret = ec_query_seq(CMD_GET_EVENT_NUM);
+		if (ret < 0)
+			return 0;
+		sci_event = ec_get_event_num();
+		if (sci_event < 0)
+			return 0;
+		if (sci_event == EVENT_LID) {
+			int lid_status;
+			/* check the LID status */
+			lid_status = ec_read(REG_LID_DETECT);
+			/* wakeup cpu when people open the LID */
+			if (lid_status == BIT_LID_DETECT_ON) {
+				/* If we call it directly here, the WARNING
+				 * will be sent out by getnstimeofday
+				 * via "WARN_ON(timekeeping_suspended);"
+				 * because we can not schedule in suspend mode.
+				 */
+				if (initialized == 0) {
+					INIT_DELAYED_WORK(&lid_task,
+						yeeloong_lid_update_task);
+					initialized = 1;
+				}
+				schedule_delayed_work(&lid_task, 1);
+				return 1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+void __weak mach_suspend(void)
+{
+	disable_mfgpt0_counter();
+}
+
+void __weak mach_resume(void)
+{
+	enable_mfgpt0_counter();
+}
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
new file mode 100644
index 0000000..51d1a60
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -0,0 +1,159 @@
+/* Board-specific reboot/shutdown routines
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536.h>
+#include "ec_kb3310b.h"
+
+static void reset_cpu(void)
+{
+	/*
+	 * reset cpu to full speed, this is needed when enabling cpu frequency
+	 * scalling
+	 */
+	LOONGSON_CHIPCFG0 |= 0x7;
+}
+
+/* reset support for fuloong2f */
+
+static void fl2f_reboot(void)
+{
+	reset_cpu();
+
+	/* send a reset signal to south bridge.
+	 *
+	 * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
+	 * normally with this reset operation and it will not work in PMON, but
+	 * you can type halt command and then reboot, seems the hardware reset
+	 * logic not work normally.
+	 */
+	{
+		u32 hi, lo;
+		_rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
+		lo |= 0x00000001;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
+	}
+}
+
+static void fl2f_shutdown(void)
+{
+	u32 hi, lo, val;
+	int gpio_base;
+
+	/* get gpio base */
+	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+	gpio_base = lo & 0xff00;
+
+	/* make cs5536 gpio13 output enable */
+	val = inl(gpio_base + GPIOL_OUT_EN);
+	val &= ~(1 << (16 + 13));
+	val |= (1 << 13);
+	outl(val, gpio_base + GPIOL_OUT_EN);
+	mmiowb();
+	/* make cs5536 gpio13 output low level voltage. */
+	val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
+	val |= (1 << (16 + 13));
+	outl(val, gpio_base + GPIOL_OUT_VAL);
+	mmiowb();
+}
+
+/* reset support for yeeloong2f and mengloong2f notebook */
+
+void ml2f_reboot(void)
+{
+	reset_cpu();
+
+	/* sending an reset signal to EC(embedded controller) */
+	ec_write(REG_RESET, BIT_RESET_ON);
+}
+
+#define yl2f89_reboot ml2f_reboot
+
+/* menglong(7inches) laptop has different shutdown logic from 8.9inches */
+#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
+#define EC_SHUTDOWN_IO_PORT_LOW	 0xff2e
+#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
+#define REG_SHUTDOWN_HIGH        0xFC
+#define REG_SHUTDOWN_LOW         0x29
+#define BIT_SHUTDOWN_ON          (1 << 1)
+
+static void ml2f_shutdown(void)
+{
+	u8 val;
+	u64 i;
+
+	outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH);
+	outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW);
+	mmiowb();
+	val = inb(EC_SHUTDOWN_IO_PORT_DATA);
+	outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA);
+	mmiowb();
+	/* need enough wait here... how many microseconds needs? */
+	for (i = 0; i < 0x10000; i++)
+		delay();
+	outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA);
+	mmiowb();
+}
+
+static void yl2f89_shutdown(void)
+{
+	/* cpu-gpio0 output low */
+	LOONGSON_GPIODATA &= ~0x00000001;
+	/* cpu-gpio0 as output */
+	LOONGSON_GPIOIE &= ~0x00000001;
+}
+
+void mach_prepare_reboot(void)
+{
+	switch (mips_machtype) {
+	case MACH_LEMOTE_FL2F:
+	case MACH_LEMOTE_NAS:
+	case MACH_LEMOTE_LL2F:
+		fl2f_reboot();
+		break;
+	case MACH_LEMOTE_ML2F7:
+		ml2f_reboot();
+		break;
+	case MACH_LEMOTE_YL2F89:
+		yl2f89_reboot();
+		break;
+	default:
+		break;
+	}
+}
+
+void mach_prepare_shutdown(void)
+{
+	switch (mips_machtype) {
+	case MACH_LEMOTE_FL2F:
+	case MACH_LEMOTE_NAS:
+	case MACH_LEMOTE_LL2F:
+		fl2f_shutdown();
+		break;
+	case MACH_LEMOTE_ML2F7:
+		ml2f_shutdown();
+		break;
+	case MACH_LEMOTE_YL2F89:
+		yl2f89_shutdown();
+		break;
+	default:
+		break;
+	}
+}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 454b539..8f2f8e9 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -35,6 +35,7 @@
  * better performance by compiling with -msoft-float!
  */
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/debugfs.h>
 
 #include <asm/inst.h>
@@ -68,7 +69,9 @@ static int fpux_emu(struct pt_regs *,
 
 /* Further private data for which no space exists in mips_fpu_struct */
 
-struct mips_fpu_emulator_stats fpuemustats;
+#ifdef CONFIG_DEBUG_FS
+DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+#endif
 
 /* Control registers */
 
@@ -209,7 +212,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 	unsigned int cond;
 
 	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
-		fpuemustats.errors++;
+		MIPS_FPU_EMU_INC_STATS(errors);
 		return SIGBUS;
 	}
 
@@ -240,7 +243,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 			return SIGILL;
 		}
 		if (get_user(ir, (mips_instruction __user *) emulpc)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		/* __compute_return_epc() will have updated cp0_epc */
@@ -253,16 +256,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 	}
 
       emul:
-	fpuemustats.emulated++;
+	MIPS_FPU_EMU_INC_STATS(emulated);
 	switch (MIPSInst_OPCODE(ir)) {
 	case ldc1_op:{
 		u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemustats.loads++;
+		MIPS_FPU_EMU_INC_STATS(loads);
 		if (get_user(val, va)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		DITOREG(val, MIPSInst_RT(ir));
@@ -274,10 +277,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemustats.stores++;
+		MIPS_FPU_EMU_INC_STATS(stores);
 		DIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		break;
@@ -288,9 +291,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemustats.loads++;
+		MIPS_FPU_EMU_INC_STATS(loads);
 		if (get_user(val, va)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		SITOREG(val, MIPSInst_RT(ir));
@@ -302,10 +305,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemustats.stores++;
+		MIPS_FPU_EMU_INC_STATS(stores);
 		SIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		break;
@@ -429,7 +432,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 				if (get_user(ir,
 				    (mips_instruction __user *) xcp->cp0_epc)) {
-					fpuemustats.errors++;
+					MIPS_FPU_EMU_INC_STATS(errors);
 					return SIGBUS;
 				}
 
@@ -595,7 +598,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 {
 	unsigned rcsr = 0;	/* resulting csr */
 
-	fpuemustats.cp1xops++;
+	MIPS_FPU_EMU_INC_STATS(cp1xops);
 
 	switch (MIPSInst_FMA_FFMT(ir)) {
 	case s_fmt:{		/* 0 */
@@ -610,9 +613,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemustats.loads++;
+			MIPS_FPU_EMU_INC_STATS(loads);
 			if (get_user(val, va)) {
-				fpuemustats.errors++;
+				MIPS_FPU_EMU_INC_STATS(errors);
 				return SIGBUS;
 			}
 			SITOREG(val, MIPSInst_FD(ir));
@@ -622,11 +625,11 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemustats.stores++;
+			MIPS_FPU_EMU_INC_STATS(stores);
 
 			SIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemustats.errors++;
+				MIPS_FPU_EMU_INC_STATS(errors);
 				return SIGBUS;
 			}
 			break;
@@ -687,9 +690,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemustats.loads++;
+			MIPS_FPU_EMU_INC_STATS(loads);
 			if (get_user(val, va)) {
-				fpuemustats.errors++;
+				MIPS_FPU_EMU_INC_STATS(errors);
 				return SIGBUS;
 			}
 			DITOREG(val, MIPSInst_FD(ir));
@@ -699,10 +702,10 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemustats.stores++;
+			MIPS_FPU_EMU_INC_STATS(stores);
 			DIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemustats.errors++;
+				MIPS_FPU_EMU_INC_STATS(errors);
 				return SIGBUS;
 			}
 			break;
@@ -769,7 +772,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 #endif
 	} rv;			/* resulting value */
 
-	fpuemustats.cp1ops++;
+	MIPS_FPU_EMU_INC_STATS(cp1ops);
 	switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) {
 	case s_fmt:{		/* 0 */
 		union {
@@ -1240,7 +1243,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 		prevepc = xcp->cp0_epc;
 
 		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
-			fpuemustats.errors++;
+			MIPS_FPU_EMU_INC_STATS(errors);
 			return SIGBUS;
 		}
 		if (insn == 0)
@@ -1276,33 +1279,50 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 }
 
 #ifdef CONFIG_DEBUG_FS
+
+static int fpuemu_stat_get(void *data, u64 *val)
+{
+	int cpu;
+	unsigned long sum = 0;
+	for_each_online_cpu(cpu) {
+		struct mips_fpu_emulator_stats *ps;
+		local_t *pv;
+		ps = &per_cpu(fpuemustats, cpu);
+		pv = (void *)ps + (unsigned long)data;
+		sum += local_read(pv);
+	}
+	*val = sum;
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n");
+
 extern struct dentry *mips_debugfs_dir;
 static int __init debugfs_fpuemu(void)
 {
 	struct dentry *d, *dir;
-	int i;
-	static struct {
-		const char *name;
-		unsigned int *v;
-	} vars[] __initdata = {
-		{ "emulated", &fpuemustats.emulated },
-		{ "loads",    &fpuemustats.loads },
-		{ "stores",   &fpuemustats.stores },
-		{ "cp1ops",   &fpuemustats.cp1ops },
-		{ "cp1xops",  &fpuemustats.cp1xops },
-		{ "errors",   &fpuemustats.errors },
-	};
 
 	if (!mips_debugfs_dir)
 		return -ENODEV;
 	dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir);
 	if (!dir)
 		return -ENOMEM;
-	for (i = 0; i < ARRAY_SIZE(vars); i++) {
-		d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v);
-		if (!d)
-			return -ENOMEM;
-	}
+
+#define FPU_STAT_CREATE(M)						\
+	do {								\
+		d = debugfs_create_file(#M , S_IRUGO, dir,		\
+			(void *)offsetof(struct mips_fpu_emulator_stats, M), \
+			&fops_fpuemu_stat);				\
+		if (!d)							\
+			return -ENOMEM;					\
+	} while (0)
+
+	FPU_STAT_CREATE(emulated);
+	FPU_STAT_CREATE(loads);
+	FPU_STAT_CREATE(stores);
+	FPU_STAT_CREATE(cp1ops);
+	FPU_STAT_CREATE(cp1xops);
+	FPU_STAT_CREATE(errors);
+
 	return 0;
 }
 __initcall(debugfs_fpuemu);
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index df7b9d9..36d975a 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -98,7 +98,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 	err |= __put_user(cpc, &fr->epc);
 
 	if (unlikely(err)) {
-		fpuemustats.errors++;
+		MIPS_FPU_EMU_INC_STATS(errors);
 		return SIGBUS;
 	}
 
@@ -136,7 +136,7 @@ int do_dsemulret(struct pt_regs *xcp)
 	err |= __get_user(cookie, &fr->cookie);
 
 	if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) {
-		fpuemustats.errors++;
+		MIPS_FPU_EMU_INC_STATS(errors);
 		return 0;
 	}
 
diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile
index 57f43c1..41b9657 100644
--- a/arch/mips/mipssim/Makefile
+++ b/arch/mips/mipssim/Makefile
@@ -17,8 +17,7 @@
 # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 #
 
-obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
-	 sim_cmdline.o
+obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o
 
 obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
 obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 2877675..0824f6a 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -61,7 +61,6 @@ void __init prom_init(void)
 	set_io_port_base(0xbfd00000);
 
 	pr_info("\nLINUX started...\n");
-	prom_init_cmdline();
 	prom_meminit();
 
 #ifdef CONFIG_MIPS_MT_SMP
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 1bd1f18..3571090 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -567,13 +567,10 @@ static uint32_t extract_dc(unsigned short addr, int data)
 				datalo = ((unsigned long long)datalohi << 32) | datalolo;
 				ecc = dc_ecc(datalo);
 				if (ecc != datahi) {
-					int bits = 0;
+					int bits;
 					bad_ecc |= 1 << (3-offset);
 					ecc ^= datahi;
-					while (ecc) {
-						if (ecc & 1) bits++;
-						ecc >>= 1;
-					}
+					bits = hweight8(ecc);
 					res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE;
 				}
 				printk("  %02X-%016llX", datahi, datalo);
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 8d1f4f3..9e8d003 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -462,7 +462,9 @@ void __init_refok free_initmem(void)
 			__pa_symbol(&__init_end));
 }
 
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 unsigned long pgd_current[NR_CPUS];
+#endif
 /*
  * On 64-bit we've got three-level pagetables with a slightly
  * different layout ...
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index bb1719a..3d0baa4 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -160,6 +160,12 @@ static u32 tlb_handler[128] __cpuinitdata;
 static struct uasm_label labels[128] __cpuinitdata;
 static struct uasm_reloc relocs[128] __cpuinitdata;
 
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
+/*
+ * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
+ * we cannot do r3000 under these circumstances.
+ */
+
 /*
  * The R3000 TLB handler is simple.
  */
@@ -199,6 +205,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void)
 
 	dump_handler((u32 *)ebase, 32);
 }
+#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
 
 /*
  * The R4000 TLB handler is much more complicated. We have two
@@ -497,8 +504,9 @@ static void __cpuinit
 build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 unsigned int tmp, unsigned int ptr)
 {
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 	long pgdc = (long)pgd_current;
-
+#endif
 	/*
 	 * The vmalloc handling is not in the hotpath.
 	 */
@@ -506,7 +514,15 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	uasm_il_bltz(p, r, tmp, label_vmalloc);
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
-#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
+	/*
+	 * &pgd << 11 stored in CONTEXT [23..63].
+	 */
+	UASM_i_MFC0(p, ptr, C0_CONTEXT);
+	uasm_i_dins(p, ptr, 0, 0, 23); /* Clear lower 23 bits of context. */
+	uasm_i_ori(p, ptr, ptr, 0x540); /* 1 0  1 0 1  << 6  xkphys cached */
+	uasm_i_drotr(p, ptr, ptr, 11);
+#elif defined(CONFIG_SMP)
 # ifdef  CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC uses TCBind value as "CPU" index
@@ -520,7 +536,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 */
 	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
 	uasm_i_dsrl(p, ptr, ptr, 23);
-#endif
+# endif
 	UASM_i_LA_mostly(p, tmp, pgdc);
 	uasm_i_daddu(p, ptr, ptr, tmp);
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
@@ -1033,6 +1049,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r,
 	iPTE_LW(p, pte, ptr);
 }
 
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 /*
  * R3000 style TLB load/store/modify handlers.
  */
@@ -1184,6 +1201,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void)
 
 	dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
 }
+#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
 
 /*
  * R4000 style TLB load/store/modify handlers.
@@ -1400,6 +1418,7 @@ void __cpuinit build_tlb_refill_handler(void)
 	case CPU_TX3912:
 	case CPU_TX3922:
 	case CPU_TX3927:
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 		build_r3000_tlb_refill_handler();
 		if (!run_once) {
 			build_r3000_tlb_load_handler();
@@ -1407,6 +1426,9 @@ void __cpuinit build_tlb_refill_handler(void)
 			build_r3000_tlb_modify_handler();
 			run_once++;
 		}
+#else
+		panic("No R3000 TLB refill handler");
+#endif
 		break;
 
 	case CPU_R6000:
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index f467199..0a165c5 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -60,11 +60,11 @@ enum opcode {
 	insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
 	insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
 	insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
-	insn_dsrl32, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr,
-	insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
+	insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
+	insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
 	insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
 	insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw,
-	insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori
+	insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins
 };
 
 struct insn {
@@ -104,6 +104,7 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE },
 	{ insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
 	{ insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
+	{ insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
 	{ insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
 	{ insn_eret,  M(cop0_op, cop_op, 0, 0, 0, eret_op),  0 },
 	{ insn_j,  M(j_op, 0, 0, 0, 0, 0),  JIMM },
@@ -132,6 +133,7 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_tlbwr,  M(cop0_op, cop_op, 0, 0, 0, tlbwr_op),  0 },
 	{ insn_xor,  M(spec_op, 0, 0, 0, 0, xor_op),  RS | RT | RD },
 	{ insn_xori,  M(xori_op, 0, 0, 0, 0, 0),  RS | RT | UIMM },
+	{ insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
 	{ insn_invalid, 0, 0 }
 };
 
@@ -304,6 +306,12 @@ Ip_u2u1s3(op)						\
 	build_insn(buf, insn##op, b, a, c);		\
 }
 
+#define I_u2u1msbu3(op)					\
+Ip_u2u1msbu3(op)					\
+{							\
+	build_insn(buf, insn##op, b, a, c+d-1, c);	\
+}
+
 #define I_u1u2(op)					\
 Ip_u1u2(op)						\
 {							\
@@ -349,6 +357,7 @@ I_u2u1u3(_dsll32)
 I_u2u1u3(_dsra)
 I_u2u1u3(_dsrl)
 I_u2u1u3(_dsrl32)
+I_u2u1u3(_drotr)
 I_u3u1u2(_dsubu)
 I_0(_eret)
 I_u1(_j)
@@ -377,6 +386,7 @@ I_0(_tlbwi)
 I_0(_tlbwr)
 I_u3u1u2(_xor)
 I_u2u1u3(_xori)
+I_u2u1msbu3(_dins);
 
 /* Handle labels. */
 void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
index c6d1e3d..3d153ed 100644
--- a/arch/mips/mm/uasm.h
+++ b/arch/mips/mm/uasm.h
@@ -34,6 +34,11 @@ uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
 void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
 
+#define Ip_u2u1msbu3(op)						\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c,	\
+	   unsigned int d)
+
 #define Ip_u1u2(op)							\
 void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
 
@@ -65,6 +70,7 @@ Ip_u2u1u3(_dsll32);
 Ip_u2u1u3(_dsra);
 Ip_u2u1u3(_dsrl);
 Ip_u2u1u3(_dsrl32);
+Ip_u2u1u3(_drotr);
 Ip_u3u1u2(_dsubu);
 Ip_0(_eret);
 Ip_u1(_j);
@@ -93,6 +99,7 @@ Ip_0(_tlbwi);
 Ip_0(_tlbwr);
 Ip_u3u1u2(_xor);
 Ip_u2u1u3(_xori);
+Ip_u2u1msbu3(_dins);
 
 /* Handle labels. */
 struct uasm_label {
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index 9035c64..b27419c 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -55,7 +55,7 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 	char *memsize_str;
 	unsigned int memsize;
 	char *ptr;
-	static char cmdline[CL_SIZE] __initdata;
+	static char cmdline[COMMAND_LINE_SIZE] __initdata;
 
 	/* otherwise look in the environment */
 	memsize_str = prom_getenv("memsize");
diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c
index 30533ba..3a467c0 100644
--- a/arch/mips/nxp/pnx833x/common/interrupts.c
+++ b/arch/mips/nxp/pnx833x/common/interrupts.c
@@ -295,7 +295,7 @@ static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type)
 }
 
 static struct irq_chip pnx833x_pic_irq_type = {
-	.typename = "PNX-PIC",
+	.name = "PNX-PIC",
 	.startup = pnx833x_startup_pic_irq,
 	.shutdown = pnx833x_shutdown_pic_irq,
 	.enable = pnx833x_enable_pic_irq,
@@ -305,7 +305,7 @@ static struct irq_chip pnx833x_pic_irq_type = {
 };
 
 static struct irq_chip pnx833x_gpio_irq_type = {
-	.typename = "PNX-GPIO",
+	.name = "PNX-GPIO",
 	.startup = pnx833x_startup_gpio_irq,
 	.shutdown = pnx833x_disable_gpio_irq,
 	.enable = pnx833x_enable_gpio_irq,
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 575cd14..475ff46 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -1,7 +1,7 @@
 /*
  * Loongson2 performance counter driver for oprofile
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
  * Author: Yanhua <yanh@lemote.com>
  * Author: Wu Zhangjin <wuzj@lemote.com>
  *
@@ -125,6 +125,9 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	 */
 
 	/* Check whether the irq belongs to me */
+	enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN;
+	if (!enabled)
+		return IRQ_NONE;
 	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
 	if (!enabled)
 		return IRQ_NONE;
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 91bfe73..c9209ca 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -22,13 +22,13 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 #
 # These are still pretty much in the old state, watch, go blind.
 #
-obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-bonito64.o
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
+obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c
deleted file mode 100644
index cd64d9f..0000000
--- a/arch/mips/pci/fixup-excite.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <excite.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (pin == 0)
-		return -1;
-
-	return USB_IRQ;		/* USB controller is the only PCI device */
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index 0c4c7a8..4f6d8da 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -13,7 +13,8 @@
  */
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/mips-boards/bonito64.h>
+
+#include <loongson.h>
 
 /* South bridge slot number is set by the pci probe process */
 static u8 sb_slot = 5;
@@ -35,7 +36,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 			break;
 		}
 	} else {
-		irq = BONITO_IRQ_BASE + 25 + pin;
+		irq = LOONGSON_IRQ_BASE + 25 + pin;
 	}
 	return irq;
 
diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c
new file mode 100644
index 0000000..caf2ede
--- /dev/null
+++ b/arch/mips/pci/fixup-lemote2f.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2008 Lemote Technology
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, lixy@ict.ac.cn
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* PCI interrupt pins
+ *
+ * These should not be changed, or you should consider loongson2f interrupt
+ * register and your pci card dispatch
+ */
+
+#define PCIA		4
+#define PCIB		5
+#define PCIC		6
+#define PCID		7
+
+/* all the pci device has the PCIA pin, check the datasheet. */
+static char irq_tab[][5] __initdata = {
+	/*      INTA    INTB    INTC    INTD */
+	{0, 0, 0, 0, 0},	/*  11: Unused */
+	{0, 0, 0, 0, 0},	/*  12: Unused */
+	{0, 0, 0, 0, 0},	/*  13: Unused */
+	{0, 0, 0, 0, 0},	/*  14: Unused */
+	{0, 0, 0, 0, 0},	/*  15: Unused */
+	{0, 0, 0, 0, 0},	/*  16: Unused */
+	{0, PCIA, 0, 0, 0},	/*  17: RTL8110-0 */
+	{0, PCIB, 0, 0, 0},	/*  18: RTL8110-1 */
+	{0, PCIC, 0, 0, 0},	/*  19: SiI3114 */
+	{0, PCID, 0, 0, 0},	/*  20: 3-ports nec usb */
+	{0, PCIA, PCIB, PCIC, PCID},	/*  21: PCI-SLOT */
+	{0, 0, 0, 0, 0},	/*  22: Unused */
+	{0, 0, 0, 0, 0},	/*  23: Unused */
+	{0, 0, 0, 0, 0},	/*  24: Unused */
+	{0, 0, 0, 0, 0},	/*  25: Unused */
+	{0, 0, 0, 0, 0},	/*  26: Unused */
+	{0, 0, 0, 0, 0},	/*  27: Unused */
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int virq;
+
+	if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
+	    && (PCI_SLOT(dev->devfn) < 32)) {
+		virq = irq_tab[slot][pin];
+		printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
+		       virq + LOONGSON_IRQ_BASE);
+		if (virq != 0)
+			return LOONGSON_IRQ_BASE + virq;
+		else
+			return 0;
+	} else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) {	/*  cs5536 */
+		switch (PCI_FUNC(dev->devfn)) {
+		case 2:
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_IDE_INTR);
+			return CS5536_IDE_INTR;	/*  for IDE */
+		case 3:
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_ACC_INTR);
+			return CS5536_ACC_INTR;	/*  for AUDIO */
+		case 4:	/*  for OHCI */
+		case 5:	/*  for EHCI */
+		case 6:	/*  for UDC */
+		case 7:	/*  for OTG */
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_USB_INTR);
+			return CS5536_USB_INTR;
+		}
+		return dev->irq;
+	} else {
+		printk(KERN_INFO " strange pci slot number.\n");
+		return 0;
+	}
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/* CS5536 SPEC. fixup */
+static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+{
+	/* the uart1 and uart2 interrupt in PIC is enabled as default */
+	pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
+	pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
+}
+
+static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+{
+	/* setting the mutex pin as IDE function */
+	pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
+			       CS5536_IDE_FLASH_SIGNATURE);
+}
+
+static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+{
+	/* enable the AUDIO interrupt in PIC  */
+	pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
+
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
+}
+
+static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+{
+	/* enable the OHCI interrupt in PIC */
+	/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
+	pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
+}
+
+static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+{
+	u32 hi, lo;
+
+	/* Serial short detect enable */
+	_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
+	_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+
+	/* setting the USB2.0 micro frame length */
+	pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
+}
+
+static void __init loongson_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	pci_read_config_dword(pdev, 0xe0, &val);
+	/* Only 2 port be used */
+	pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+			 loongson_cs5536_isa_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
+			 loongson_cs5536_ohci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
+			 loongson_cs5536_ehci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
+			 loongson_cs5536_acc_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
+			 loongson_cs5536_ide_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+			 loongson_nec_fixup);
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 54e55e7..1b3e03f 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -29,13 +29,8 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-#ifdef CONFIG_LEMOTE_FULOONG2E
-#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
-#define ID_SEL_BEGIN 11
-#else
 #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
 #define ID_SEL_BEGIN 10
-#endif
 #define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
 
 
@@ -77,10 +72,8 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 	addrp = CFG_SPACE_REG(addr & 0xffff);
 	if (access_type == PCI_ACCESS_WRITE) {
 		writel(cpu_to_le32(*data), addrp);
-#ifndef CONFIG_LEMOTE_FULOONG2E
 		/* Wait till done */
 		while (BONITO_PCIMSTAT & 0xF);
-#endif
 	} else {
 		*data = le32_to_cpu(readl(addrp));
 	}
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
new file mode 100644
index 0000000..aa5d3da
--- /dev/null
+++ b/arch/mips/pci/ops-loongson2.c
@@ -0,0 +1,208 @@
+/*
+ * fuloong2e specific PCI support.
+ *
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_CS5536
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536.h>
+#endif
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+	(void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+				      struct pci_bus *bus,
+				      unsigned int devfn, int where,
+				      u32 *data)
+{
+	u32 busnum = bus->number;
+	u32 addr, type;
+	u32 dummy;
+	void *addrp;
+	int device = PCI_SLOT(devfn);
+	int function = PCI_FUNC(devfn);
+	int reg = where & ~3;
+
+	if (busnum == 0) {
+		/* board-specific part,currently,only fuloong2f,yeeloong2f
+		 * use CS5536, fuloong2e use via686b, gdium has no
+		 * south bridge
+		 */
+#ifdef CONFIG_CS5536
+		/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
+		 * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+		 * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
+		 * will not go this branch, but the others. so, no calling dead
+		 * loop here.
+		 */
+		if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) {
+			switch (access_type) {
+			case PCI_ACCESS_READ:
+				*data = cs5536_pci_conf_read4(function, reg);
+				break;
+			case PCI_ACCESS_WRITE:
+				cs5536_pci_conf_write4(function, reg, *data);
+				break;
+			}
+			return 0;
+		}
+#endif
+		/* Type 0 configuration for onboard PCI bus */
+		if (device > MAX_DEV_NUM)
+			return -1;
+
+		addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+		type = 0;
+	} else {
+		/* Type 1 configuration for offboard PCI bus */
+		addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+		type = 0x10000;
+	}
+
+	/* Clear aborts */
+	LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+				LOONGSON_PCICMD_MTABORT_CLR;
+
+	LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+	/* Flush Bonito register block */
+	dummy = LOONGSON_PCIMAP_CFG;
+	mmiowb();
+
+	addrp = CFG_SPACE_REG(addr & 0xffff);
+	if (access_type == PCI_ACCESS_WRITE)
+		writel(cpu_to_le32(*data), addrp);
+	else
+		*data = le32_to_cpu(readl(addrp));
+
+	/* Detect Master/Target abort */
+	if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+			     LOONGSON_PCICMD_MTABORT_CLR)) {
+		/* Error occurred */
+
+		/* Clear bits */
+		LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+				  LOONGSON_PCICMD_MTABORT_CLR);
+
+		return -1;
+	}
+
+	return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 *val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+				       &data))
+		return -1;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (size == 4)
+		data = val;
+	else {
+		if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+					where, &data))
+			return -1;
+
+		if (size == 1)
+			data = (data & ~(0xff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+		else if (size == 2)
+			data = (data & ~(0xffff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+	}
+
+	if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+				       &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+	.read = loongson_pcibios_read,
+	.write = loongson_pcibios_write
+};
+
+#ifdef CONFIG_CS5536
+void _rdmsr(u32 msr, u32 *hi, u32 *lo)
+{
+	struct pci_bus bus = {
+		.number = PCI_BUS_CS5536
+	};
+	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_rdmsr);
+
+void _wrmsr(u32 msr, u32 hi, u32 lo)
+{
+	struct pci_bus bus = {
+		.number = PCI_BUS_CS5536
+	};
+	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_wrmsr);
+#endif
diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c
deleted file mode 100644
index 8a56876..0000000
--- a/arch/mips/pci/pci-excite.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-
-extern struct pci_ops titan_pci_ops;
-
-
-static struct resource
-	mem_resource = 	{
-		.name	= "PCI memory",
-		.start	= EXCITE_PHYS_PCI_MEM,
-		.end	= EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1,
-		.flags	= IORESOURCE_MEM
-	},
-	io_resource = {
-		.name	= "PCI I/O",
-		.start	= EXCITE_PHYS_PCI_IO,
-		.end	= EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1,
-		.flags	= IORESOURCE_IO
-	};
-
-
-static struct pci_controller bx_controller = {
-	.pci_ops	= &titan_pci_ops,
-	.mem_resource	= &mem_resource,
-	.mem_offset	= 0x00000000UL,
-	.io_resource	= &io_resource,
-	.io_offset	= 0x00000000UL
-};
-
-
-static char
-	iopage_failed[] __initdata   = "Cannot allocate PCI I/O page",
-	modebits_no_pci[] __initdata = "PCI is not configured in mode bits";
-
-#define RM9000x2_OCD_HTSC	0x0604
-#define RM9000x2_OCD_HTBHL	0x060c
-#define RM9000x2_OCD_PCIHRST	0x078c
-
-#define RM9K_OCD_MODEBIT1	0x00d4 /* (MODEBIT1) Mode Bit 1 */
-#define RM9K_OCD_CPHDCR		0x00f4 /* CPU-PCI/HT Data Control. */
-
-#define PCISC_FB2B 		0x00000200
-#define PCISC_MWICG		0x00000010
-#define PCISC_EMC		0x00000004
-#define PCISC_ERMA		0x00000002
-
-
-
-static int __init basler_excite_pci_setup(void)
-{
-	const unsigned int fullbars = memsize / (256 << 20);
-	unsigned int i;
-
-	/* Check modebits to see if PCI is really enabled. */
-	if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1))
-		panic(modebits_no_pci);
-
-	if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO,
-				       "Memory-mapped PCI I/O page"))
-		panic(iopage_failed);
-
-	/* Enable PCI 0 as master for config cycles */
-	ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC);
-
-
-	/* Set up latency timer */
-	ocd_writel(0x8008, RM9000x2_OCD_HTBHL);
-
-	/*  Setup host IO and Memory space */
-	ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7);
-	ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7);
-	ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8);
-	ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8);
-
-	/* Set up PCI BARs to map all installed memory */
-	for (i = 0; i < 6; i++) {
-		const unsigned int bar = 0x610 + i * 4;
-
-	     	if (i < fullbars) {
-			ocd_writel(0x10000000 * i, bar);
-			ocd_writel(0x01000000 * i, bar + 0x140);
-			ocd_writel(0x0ffff029, bar + 0x100);
-			continue;
-		}
-
-	     	if (i == fullbars) {
-			int o;
-			u32 mask;
-
-			const unsigned long rem = memsize - i * 0x10000000;
-			if (!rem) {
-				ocd_writel(0x00000000, bar + 0x100);
-				continue;
-			}
-
-			o = ffs(rem) - 1;
-			if (rem & ~(0x1 << o))
-				o++;
-			mask = ((0x1 << o) & 0x0ffff000) - 0x1000;
-			ocd_writel(0x10000000 * i, bar);
-			ocd_writel(0x01000000 * i, bar + 0x140);
-			ocd_writel(0x00000029 | mask, bar + 0x100);
-			continue;
-		}
-
-		ocd_writel(0x00000000, bar + 0x100);
-	}
-
-	/* Finally, enable the PCI interrupt */
-#if USB_IRQ > 7
-	set_c0_intcontrol(1 << USB_IRQ);
-#else
-	set_c0_status(1 << (USB_IRQ + 8));
-#endif
-
-	ioport_resource.start = EXCITE_PHYS_PCI_IO;
-	ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1;
-	set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO));
-	register_pci_controller(&bx_controller);
-	return 0;
-}
-
-
-arch_initcall(basler_excite_pci_setup);
diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
new file mode 100644
index 0000000..ff0e7e3
--- /dev/null
+++ b/arch/mips/powertv/Kconfig
@@ -0,0 +1,21 @@
+source "arch/mips/powertv/asic/Kconfig"
+
+config BOOTLOADER_DRIVER
+	bool "PowerTV Bootloader Driver Support"
+	default n
+	depends on POWERTV
+	help
+	  Use this option if you want to load bootloader driver.
+
+config BOOTLOADER_FAMILY
+	string "POWERTV Bootloader Family string"
+	default "85"
+	depends on POWERTV && !BOOTLOADER_DRIVER
+	help
+	  This value should be specified when the bootloader driver is disabled
+	  and must be exactly two characters long. Families supported are:
+	    R1 - RNG-100  R2 - RNG-200
+	    A1 - Class A  B1 - Class B
+	    E1 - Class E  F1 - Class F
+	    44 - 45xx     46 - 46xx
+	    85 - 85xx     86 - 86xx
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
new file mode 100644
index 0000000..2c51671
--- /dev/null
+++ b/arch/mips/powertv/Makefile
@@ -0,0 +1,28 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+# Portions copyright (C)  2009 Cisco Systems, Inc.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Makefile for the Cisco PowerTV-specific kernel interface routines
+# under Linux.
+#
+
+obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+
+EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig
new file mode 100644
index 0000000..2016bfe
--- /dev/null
+++ b/arch/mips/powertv/asic/Kconfig
@@ -0,0 +1,28 @@
+config MIN_RUNTIME_RESOURCES
+	bool "Support for minimum runtime resources"
+	default n
+	depends on POWERTV
+	help
+	  Enables support for minimizing the number of (SA asic) runtime
+	  resources that are preallocated by the kernel.
+
+config MIN_RUNTIME_DOCSIS
+	bool "Support for minimum DOCSIS resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated DOCSIS resource.
+
+config MIN_RUNTIME_PMEM
+	bool "Support for minimum PMEM resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated Memory resource.
+
+config MIN_RUNTIME_TFTP
+	bool "Support for minimum TFTP resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated TFTP resource.
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
new file mode 100644
index 0000000..bebfdcf
--- /dev/null
+++ b/arch/mips/powertv/asic/Makefile
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2009  Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
+	 irq_asic.o prealloc-calliope.o prealloc-cronus.o \
+	 prealloc-cronuslite.o prealloc-zeus.o
+
+EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
new file mode 100644
index 0000000..03d3884
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Calliope ASIC.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map calliope_register_map = {
+	.eic_slow0_strt_add = 0x800000,
+	.eic_cfg_bits = 0x800038,
+	.eic_ready_status = 0x80004c,
+
+	.chipver3 = 0xA00800,
+	.chipver2 = 0xA00804,
+	.chipver1 = 0xA00808,
+	.chipver0 = 0xA0080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0xA01800,
+	.uart1_inten = 0xA01804,
+	.uart1_config1 = 0xA01808,
+	.uart1_config2 = 0xA0180C,
+	.uart1_divisorhi = 0xA01810,
+	.uart1_divisorlo = 0xA01814,
+	.uart1_data = 0xA01818,
+	.uart1_status = 0xA0181C,
+
+	.int_stat_3 = 0xA02800,
+	.int_stat_2 = 0xA02804,
+	.int_stat_1 = 0xA02808,
+	.int_stat_0 = 0xA0280c,
+	.int_config = 0xA02810,
+	.int_int_scan = 0xA02818,
+	.ien_int_3 = 0xA02830,
+	.ien_int_2 = 0xA02834,
+	.ien_int_1 = 0xA02838,
+	.ien_int_0 = 0xA0283c,
+	.int_level_3_3 = 0xA02880,
+	.int_level_3_2 = 0xA02884,
+	.int_level_3_1 = 0xA02888,
+	.int_level_3_0 = 0xA0288c,
+	.int_level_2_3 = 0xA02890,
+	.int_level_2_2 = 0xA02894,
+	.int_level_2_1 = 0xA02898,
+	.int_level_2_0 = 0xA0289c,
+	.int_level_1_3 = 0xA028a0,
+	.int_level_1_2 = 0xA028a4,
+	.int_level_1_1 = 0xA028a8,
+	.int_level_1_0 = 0xA028ac,
+	.int_level_0_3 = 0xA028b0,
+	.int_level_0_2 = 0xA028b4,
+	.int_level_0_1 = 0xA028b8,
+	.int_level_0_0 = 0xA028bc,
+	.int_docsis_en = 0xA028F4,
+
+	.mips_pll_setup = 0x980000,
+	.usb_fs = 0x980030,     	/* -default 72800028- */
+	.test_bus = 0x9800CC,
+	.crt_spare = 0x9800d4,
+	.usb2_ohci_int_mask = 0x9A000c,
+	.usb2_strap = 0x9A0014,
+	.ehci_hcapbase = 0x9BFE00,
+	.ohci_hc_revision = 0x9BFC00,
+	.bcm1_bs_lmi_steer = 0x9E0004,
+	.usb2_control = 0x9E0054,
+	.usb2_stbus_obc = 0x9BFF00,
+	.usb2_stbus_mess_size = 0x9BFF04,
+	.usb2_stbus_chunk_size = 0x9BFF08,
+
+	.pcie_regs = 0x000000,      	/* -doesn't exist- */
+	.tim_ch = 0xA02C10,
+	.tim_cl = 0xA02C14,
+	.gpio_dout = 0xA02c20,
+	.gpio_din = 0xA02c24,
+	.gpio_dir = 0xA02c2C,
+	.watchdog = 0xA02c30,
+	.front_panel = 0x000000,    	/* -not used- */
+};
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
new file mode 100644
index 0000000..5f4589c
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Cronus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map cronus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004C,
+
+	.chipver3 = 0x2A0800,
+	.chipver2 = 0x2A0804,
+	.chipver1 = 0x2A0808,
+	.chipver0 = 0x2A080C,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x2A1800,
+	.uart1_inten = 0x2A1804,
+	.uart1_config1 = 0x2A1808,
+	.uart1_config2 = 0x2A180C,
+	.uart1_divisorhi = 0x2A1810,
+	.uart1_divisorlo = 0x2A1814,
+	.uart1_data = 0x2A1818,
+	.uart1_status = 0x2A181C,
+
+	.int_stat_3 = 0x2A2800,
+	.int_stat_2 = 0x2A2804,
+	.int_stat_1 = 0x2A2808,
+	.int_stat_0 = 0x2A280C,
+	.int_config = 0x2A2810,
+	.int_int_scan = 0x2A2818,
+	.ien_int_3 = 0x2A2830,
+	.ien_int_2 = 0x2A2834,
+	.ien_int_1 = 0x2A2838,
+	.ien_int_0 = 0x2A283C,
+	.int_level_3_3 = 0x2A2880,
+	.int_level_3_2 = 0x2A2884,
+	.int_level_3_1 = 0x2A2888,
+	.int_level_3_0 = 0x2A288C,
+	.int_level_2_3 = 0x2A2890,
+	.int_level_2_2 = 0x2A2894,
+	.int_level_2_1 = 0x2A2898,
+	.int_level_2_0 = 0x2A289C,
+	.int_level_1_3 = 0x2A28A0,
+	.int_level_1_2 = 0x2A28A4,
+	.int_level_1_1 = 0x2A28A8,
+	.int_level_1_0 = 0x2A28AC,
+	.int_level_0_3 = 0x2A28B0,
+	.int_level_0_2 = 0x2A28B4,
+	.int_level_0_1 = 0x2A28B8,
+	.int_level_0_0 = 0x2A28BC,
+	.int_docsis_en = 0x2A28F4,
+
+	.mips_pll_setup = 0x1C0000,
+	.usb_fs = 0x1C0018,
+	.test_bus = 0x1C00CC,
+	.crt_spare = 0x1c00d4,
+	.usb2_ohci_int_mask = 0x20000C,
+	.usb2_strap = 0x200014,
+	.ehci_hcapbase = 0x21FE00,
+	.ohci_hc_revision = 0x1E0000,
+	.bcm1_bs_lmi_steer = 0x2E0008,
+	.usb2_control = 0x2E004C,
+	.usb2_stbus_obc = 0x21FF00,
+	.usb2_stbus_mess_size = 0x21FF04,
+	.usb2_stbus_chunk_size = 0x21FF08,
+
+	.pcie_regs = 0x220000,
+	.tim_ch = 0x2A2C10,
+	.tim_cl = 0x2A2C14,
+	.gpio_dout = 0x2A2C20,
+	.gpio_din = 0x2A2C24,
+	.gpio_dir = 0x2A2C2C,
+	.watchdog = 0x2A2C30,
+	.front_panel = 0x2A3800,
+};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
new file mode 100644
index 0000000..1469daa
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Zeus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map zeus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004c,
+
+	.chipver3 = 0x280800,
+	.chipver2 = 0x280804,
+	.chipver1 = 0x280808,
+	.chipver0 = 0x28080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x281800,
+	.uart1_inten = 0x281804,
+	.uart1_config1 = 0x281808,
+	.uart1_config2 = 0x28180C,
+	.uart1_divisorhi = 0x281810,
+	.uart1_divisorlo = 0x281814,
+	.uart1_data = 0x281818,
+	.uart1_status = 0x28181C,
+
+	.int_stat_3 = 0x282800,
+	.int_stat_2 = 0x282804,
+	.int_stat_1 = 0x282808,
+	.int_stat_0 = 0x28280c,
+	.int_config = 0x282810,
+	.int_int_scan = 0x282818,
+	.ien_int_3 = 0x282830,
+	.ien_int_2 = 0x282834,
+	.ien_int_1 = 0x282838,
+	.ien_int_0 = 0x28283c,
+	.int_level_3_3 = 0x282880,
+	.int_level_3_2 = 0x282884,
+	.int_level_3_1 = 0x282888,
+	.int_level_3_0 = 0x28288c,
+	.int_level_2_3 = 0x282890,
+	.int_level_2_2 = 0x282894,
+	.int_level_2_1 = 0x282898,
+	.int_level_2_0 = 0x28289c,
+	.int_level_1_3 = 0x2828a0,
+	.int_level_1_2 = 0x2828a4,
+	.int_level_1_1 = 0x2828a8,
+	.int_level_1_0 = 0x2828ac,
+	.int_level_0_3 = 0x2828b0,
+	.int_level_0_2 = 0x2828b4,
+	.int_level_0_1 = 0x2828b8,
+	.int_level_0_0 = 0x2828bc,
+	.int_docsis_en = 0x2828F4,
+
+	.mips_pll_setup = 0x1a0000,
+	.usb_fs = 0x1a0018,
+	.test_bus = 0x1a0238,
+	.crt_spare = 0x1a0090,
+	.usb2_ohci_int_mask = 0x1e000c,
+	.usb2_strap = 0x1e0014,
+	.ehci_hcapbase = 0x1FFE00,
+	.ohci_hc_revision = 0x1FFC00,
+	.bcm1_bs_lmi_steer = 0x2C0008,
+	.usb2_control = 0x2c01a0,
+	.usb2_stbus_obc = 0x1FFF00,
+	.usb2_stbus_mess_size = 0x1FFF04,
+	.usb2_stbus_chunk_size = 0x1FFF08,
+
+	.pcie_regs = 0x200000,
+	.tim_ch = 0x282C10,
+	.tim_cl = 0x282C14,
+	.gpio_dout = 0x282c20,
+	.gpio_din = 0x282c24,
+	.gpio_dir = 0x282c2C,
+	.watchdog = 0x282c30,
+	.front_panel = 0x283800,
+};
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
new file mode 100644
index 0000000..bae8288
--- /dev/null
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -0,0 +1,787 @@
+/*
+ *                   ASIC Device List Intialization
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ *
+ * NOTE: The bootloader allocates persistent memory at an address which is
+ * 16 MiB below the end of the highest address in KSEG0. All fixed
+ * address memory reservations must avoid this region.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_reg.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <asm/page.h>
+#include <linux/swap.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-powertv/asic.h>
+#include <asm/mach-powertv/asic_regs.h>
+#include <asm/mach-powertv/interrupts.h>
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+#include <asm/mach-powertv/kbldr.h>
+#endif
+#include <asm/bootinfo.h>
+
+#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
+
+/*
+ * Forward Prototypes
+ */
+static void pmem_setup_resource(void);
+
+/*
+ * Global Variables
+ */
+enum asic_type asic;
+
+unsigned int platform_features;
+unsigned int platform_family;
+const struct register_map  *register_map;
+EXPORT_SYMBOL(register_map);			/* Exported for testing */
+unsigned long asic_phy_base;
+unsigned long asic_base;
+EXPORT_SYMBOL(asic_base);			/* Exported for testing */
+struct resource *gp_resources;
+static bool usb_configured;
+
+/*
+ * Don't recommend to use it directly, it is usually used by kernel internally.
+ * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
+ */
+unsigned long phys_to_bus_offset;
+EXPORT_SYMBOL(phys_to_bus_offset);
+
+/*
+ *
+ * IO Resource Definition
+ *
+ */
+
+struct resource asic_resource = {
+	.name  = "ASIC Resource",
+	.start = 0,
+	.end   = ASIC_IO_SIZE,
+	.flags = IORESOURCE_MEM,
+};
+
+/*
+ *
+ * USB Host Resource Definition
+ *
+ */
+
+static struct resource ehci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbehci,
+		.end    = irq_usbehci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ehci_device = {
+	.name = "powertv-ehci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ehci_resources,
+	.dev = {
+		.dma_mask = &ehci_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource ohci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbohci,
+		.end    = irq_usbohci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ohci_device = {
+	.name = "powertv-ohci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ohci_resources,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct platform_device *platform_devices[] = {
+	&ehci_device,
+	&ohci_device,
+};
+
+/*
+ *
+ * Platform Configuration and Device Initialization
+ *
+ */
+static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
+{
+	int en_prg, byp, pwr, nsb, val;
+	int sout;
+
+	sout = 1;
+	en_prg = 1;
+	byp = 0;
+	nsb = 1;
+	pwr = 1;
+
+	val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
+		(nsb<<1) | (disable_div_by_3<<5));
+
+	asic_write(val, usb_fs);
+	asic_write(val | (en_prg<<4), usb_fs);
+	asic_write(val | (en_prg<<4) | pwr, usb_fs);
+}
+
+/*
+ * Allow override of bootloader-specified model
+ */
+static char __initdata cmdline[COMMAND_LINE_SIZE];
+
+#define	FORCEFAMILY_PARAM	"forcefamily"
+
+static __init int check_forcefamily(unsigned char forced_family[2])
+{
+	const char *p;
+
+	forced_family[0] = '\0';
+	forced_family[1] = '\0';
+
+	/* Check the command line for a forcefamily directive */
+	strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
+	p = strstr(cmdline, FORCEFAMILY_PARAM);
+	if (p && (p != cmdline) && (*(p - 1) != ' '))
+		p = strstr(p, " " FORCEFAMILY_PARAM "=");
+
+	if (p) {
+		p += strlen(FORCEFAMILY_PARAM "=");
+
+		if (*p == '\0' || *(p + 1) == '\0' ||
+			(*(p + 2) != '\0' && *(p + 2) != ' '))
+			pr_err(FORCEFAMILY_PARAM " must be exactly two "
+				"characters long, ignoring value\n");
+
+		else {
+			forced_family[0] = *p;
+			forced_family[1] = *(p + 1);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * platform_set_family - determine major platform family type.
+ *
+ * Returns family type; -1 if none
+ * Returns the family type; -1 if none
+ *
+ */
+static __init noinline void platform_set_family(void)
+{
+#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
+
+	unsigned char forced_family[2];
+	unsigned short bootldr_family;
+
+	check_forcefamily(forced_family);
+
+	if (forced_family[0] != '\0' && forced_family[1] != '\0')
+		bootldr_family = BOOTLDRFAMILY(forced_family[0],
+			forced_family[1]);
+	else {
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+		bootldr_family = (unsigned short) kbldr_GetSWFamily();
+#else
+#if defined(CONFIG_BOOTLOADER_FAMILY)
+		bootldr_family = (unsigned short) BOOTLDRFAMILY(
+			CONFIG_BOOTLOADER_FAMILY[0],
+			CONFIG_BOOTLOADER_FAMILY[1]);
+#else
+#error "Unknown Bootloader Family"
+#endif
+#endif
+	}
+
+	pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
+
+	switch (bootldr_family) {
+	case BOOTLDRFAMILY('R', '1'):
+		platform_family = FAMILY_1500;
+		break;
+	case BOOTLDRFAMILY('4', '4'):
+		platform_family = FAMILY_4500;
+		break;
+	case BOOTLDRFAMILY('4', '6'):
+		platform_family = FAMILY_4600;
+		break;
+	case BOOTLDRFAMILY('A', '1'):
+		platform_family = FAMILY_4600VZA;
+		break;
+	case BOOTLDRFAMILY('8', '5'):
+		platform_family = FAMILY_8500;
+		break;
+	case BOOTLDRFAMILY('R', '2'):
+		platform_family = FAMILY_8500RNG;
+		break;
+	case BOOTLDRFAMILY('8', '6'):
+		platform_family = FAMILY_8600;
+		break;
+	case BOOTLDRFAMILY('B', '1'):
+		platform_family = FAMILY_8600VZB;
+		break;
+	case BOOTLDRFAMILY('E', '1'):
+		platform_family = FAMILY_1500VZE;
+		break;
+	case BOOTLDRFAMILY('F', '1'):
+		platform_family = FAMILY_1500VZF;
+		break;
+	default:
+		platform_family = -1;
+	}
+}
+
+unsigned int platform_get_family(void)
+{
+	return platform_family;
+}
+EXPORT_SYMBOL(platform_get_family);
+
+/*
+ * \brief usb_eye_configure() for optimizing the USB eye on Calliope.
+ *
+ * \param     unsigned int value saved to the register.
+ *
+ * \return    none
+ *
+ */
+static void __init usb_eye_configure(unsigned int value)
+{
+	asic_write(asic_read(crt_spare) | value, crt_spare);
+}
+
+/*
+ * platform_get_asic - determine the ASIC type.
+ *
+ * \param     none
+ *
+ * \return    ASIC type; ASIC_UNKNOWN if none
+ *
+ */
+enum asic_type platform_get_asic(void)
+{
+	return asic;
+}
+EXPORT_SYMBOL(platform_get_asic);
+
+/*
+ * platform_configure_usb - usb configuration based on platform type.
+ * @bcm1_usb2_ctl:	value for the BCM1_USB2_CTL register, which is
+ *			quirky
+ */
+static void __init platform_configure_usb(void)
+{
+	u32 bcm1_usb2_ctl;
+
+	if (usb_configured)
+		return;
+
+	switch (asic) {
+	case ASIC_ZEUS:
+		fs_update(0x0000, 0x11, 0x02, 0);
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	case ASIC_CRONUS:
+	case ASIC_CRONUSLITE:
+		fs_update(0x0000, 0x11, 0x02, 0);
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	case ASIC_CALLIOPE:
+		fs_update(0x0000, 0x11, 0x02, 1);
+
+		switch (platform_family) {
+		case FAMILY_1500VZE:
+			break;
+
+		case FAMILY_1500VZF:
+			usb_eye_configure(0x003c0000);
+			break;
+
+		default:
+			usb_eye_configure(0x00300000);
+			break;
+		}
+
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	default:
+		pr_err("Unknown ASIC type: %d\n", asic);
+		break;
+	}
+
+	/* turn on USB power */
+	asic_write(0, usb2_strap);
+	/* Enable all OHCI interrupts */
+	asic_write(bcm1_usb2_ctl, usb2_control);
+	/* USB2_STBUS_OBC store32/load32 */
+	asic_write(3, usb2_stbus_obc);
+	/* USB2_STBUS_MESS_SIZE 2 packets */
+	asic_write(1, usb2_stbus_mess_size);
+	/* USB2_STBUS_CHUNK_SIZE 2 packets */
+	asic_write(1, usb2_stbus_chunk_size);
+
+	usb_configured = true;
+}
+
+/*
+ * Set up the USB EHCI interface
+ */
+void platform_configure_usb_ehci()
+{
+	platform_configure_usb();
+}
+
+/*
+ * Set up the USB OHCI interface
+ */
+void platform_configure_usb_ohci()
+{
+	platform_configure_usb();
+}
+
+/*
+ * Shut the USB EHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ehci()
+{
+}
+
+/*
+ * Shut the USB OHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ohci()
+{
+}
+
+/**
+ * configure_platform - configuration based on platform type.
+ */
+void __init configure_platform(void)
+{
+	platform_set_family();
+
+	switch (platform_family) {
+	case FAMILY_1500:
+	case FAMILY_1500VZE:
+	case FAMILY_1500VZF:
+		platform_features = FFS_CAPABLE;
+		asic = ASIC_CALLIOPE;
+		asic_phy_base = CALLIOPE_IO_BASE;
+		register_map = &calliope_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+
+		if (platform_family == FAMILY_1500VZE) {
+			gp_resources = non_dvr_vze_calliope_resources;
+			pr_info("Platform: 1500/Vz Class E - "
+				"CALLIOPE, NON_DVR_CAPABLE\n");
+		} else if (platform_family == FAMILY_1500VZF) {
+			gp_resources = non_dvr_vzf_calliope_resources;
+			pr_info("Platform: 1500/Vz Class F - "
+				"CALLIOPE, NON_DVR_CAPABLE\n");
+		} else {
+			gp_resources = non_dvr_calliope_resources;
+			pr_info("Platform: 1500/RNG100 - CALLIOPE, "
+				"NON_DVR_CAPABLE\n");
+		}
+		break;
+
+	case FAMILY_4500:
+		platform_features = FFS_CAPABLE | PCIE_CAPABLE |
+			DISPLAY_CAPABLE;
+		asic = ASIC_ZEUS;
+		asic_phy_base = ZEUS_IO_BASE;
+		register_map = &zeus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_zeus_resources;
+
+		pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
+		break;
+
+	case FAMILY_4600:
+	{
+		unsigned int chipversion = 0;
+
+		/* The settop has PCIE but it isn't used, so don't advertise
+		 * it*/
+		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+		asic_phy_base = CRONUS_IO_BASE;   /* same as Cronus */
+		register_map = &cronus_register_map;   /* same as Cronus */
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_cronuslite_resources;
+
+		/* ASIC version will determine if this is a real CronusLite or
+		 * Castrati(Cronus) */
+		chipversion  = asic_read(chipver3) << 24;
+		chipversion |= asic_read(chipver2) << 16;
+		chipversion |= asic_read(chipver1) << 8;
+		chipversion |= asic_read(chipver0);
+
+		if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
+			asic = ASIC_CRONUS;
+		else
+			asic = ASIC_CRONUSLITE;
+
+		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
+			"chipversion=0x%08X\n",
+			(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
+			chipversion);
+		break;
+	}
+	case FAMILY_4600VZA:
+		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+		asic = ASIC_CRONUS;
+		asic_phy_base = CRONUS_IO_BASE;
+		register_map = &cronus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_cronus_resources;
+
+		pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
+		break;
+
+	case FAMILY_8500:
+	case FAMILY_8500RNG:
+		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
+			DISPLAY_CAPABLE;
+		asic = ASIC_ZEUS;
+		asic_phy_base = ZEUS_IO_BASE;
+		register_map = &zeus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = dvr_zeus_resources;
+
+		pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
+		break;
+
+	case FAMILY_8600:
+	case FAMILY_8600VZB:
+		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
+			DISPLAY_CAPABLE;
+		asic = ASIC_CRONUS;
+		asic_phy_base = CRONUS_IO_BASE;
+		register_map = &cronus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = dvr_cronus_resources;
+
+		pr_info("Platform: 8600/Vz Class B - CRONUS, "
+			"DVR_CAPABLE\n");
+		break;
+
+	default:
+		pr_crit("Platform:  UNKNOWN PLATFORM\n");
+		break;
+	}
+
+	switch (asic) {
+	case ASIC_ZEUS:
+		phys_to_bus_offset = 0x30000000;
+		break;
+	case ASIC_CALLIOPE:
+		phys_to_bus_offset = 0x10000000;
+		break;
+	case ASIC_CRONUSLITE:
+		/* Fall through */
+	case ASIC_CRONUS:
+		/*
+		 * TODO: We suppose 0x10000000 aliases into 0x20000000-
+		 * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
+		 * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
+		 */
+		phys_to_bus_offset = 0x10000000;
+		break;
+	default:
+		phys_to_bus_offset = 0x00000000;
+		break;
+	}
+}
+
+/**
+ * platform_devices_init - sets up USB device resourse.
+ */
+static int __init platform_devices_init(void)
+{
+	pr_notice("%s: ----- Initializing USB resources -----\n", __func__);
+
+	asic_resource.start = asic_phy_base;
+	asic_resource.end += asic_resource.start;
+
+	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
+	ehci_resources[0].end += ehci_resources[0].start;
+
+	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
+	ohci_resources[0].end += ohci_resources[0].start;
+
+	set_io_port_base(0);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	return 0;
+}
+
+arch_initcall(platform_devices_init);
+
+/*
+ *
+ * BOOTMEM ALLOCATION
+ *
+ */
+/*
+ * Allocates/reserves the Platform memory resources early in the boot process.
+ * This ignores any resources that are designated IORESOURCE_IO
+ */
+void __init platform_alloc_bootmem(void)
+{
+	int i;
+	int total = 0;
+
+	/* Get persistent memory data from command line before allocating
+	 * resources. This need to happen before normal command line parsing
+	 * has been done */
+	pmem_setup_resource();
+
+	/* Loop through looking for resources that want a particular address */
+	for (i = 0; gp_resources[i].flags != 0; i++) {
+		int size = gp_resources[i].end - gp_resources[i].start + 1;
+		if ((gp_resources[i].start != 0) &&
+			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
+			reserve_bootmem(bus_to_phys(gp_resources[i].start),
+				size, 0);
+			total += gp_resources[i].end -
+				gp_resources[i].start + 1;
+			pr_info("reserve resource %s at %08x (%u bytes)\n",
+				gp_resources[i].name, gp_resources[i].start,
+				gp_resources[i].end -
+					gp_resources[i].start + 1);
+		}
+	}
+
+	/* Loop through assigning addresses for those that are left */
+	for (i = 0; gp_resources[i].flags != 0; i++) {
+		int size = gp_resources[i].end - gp_resources[i].start + 1;
+		if ((gp_resources[i].start == 0) &&
+			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
+			void *mem = alloc_bootmem_pages(size);
+
+			if (mem == NULL)
+				pr_err("Unable to allocate bootmem pages "
+					"for %s\n", gp_resources[i].name);
+
+			else {
+				gp_resources[i].start =
+					phys_to_bus(virt_to_phys(mem));
+				gp_resources[i].end =
+					gp_resources[i].start + size - 1;
+				total += size;
+				pr_info("allocate resource %s at %08x "
+						"(%u bytes)\n",
+					gp_resources[i].name,
+					gp_resources[i].start, size);
+			}
+		}
+	}
+
+	pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
+
+	/* indicate resources that are platform I/O related */
+	for (i = 0; gp_resources[i].flags != 0; i++) {
+		if ((gp_resources[i].start != 0) &&
+			((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
+			pr_info("reserved platform resource %s at %08x\n",
+				gp_resources[i].name, gp_resources[i].start);
+		}
+	}
+}
+
+/*
+ *
+ * PERSISTENT MEMORY (PMEM) CONFIGURATION
+ *
+ */
+static unsigned long pmemaddr __initdata;
+
+static int __init early_param_pmemaddr(char *p)
+{
+	pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
+	return 0;
+}
+early_param("pmemaddr", early_param_pmemaddr);
+
+static long pmemlen __initdata;
+
+static int __init early_param_pmemlen(char *p)
+{
+/* TODO: we can use this code when and if the bootloader ever changes this */
+#if 0
+	pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
+#else
+	pmemlen = 0x20000;
+#endif
+	return 0;
+}
+early_param("pmemlen", early_param_pmemlen);
+
+/*
+ * Set up persistent memory. If we were given values, we patch the array of
+ * resources. Otherwise, persistent memory may be allocated anywhere at all.
+ */
+static void __init pmem_setup_resource(void)
+{
+	struct resource *resource;
+	resource = asic_resource_get("DiagPersistentMemory");
+
+	if (resource && pmemaddr && pmemlen) {
+		/* The address provided by bootloader is in kseg0. Convert to
+		 * a bus address. */
+		resource->start = phys_to_bus(pmemaddr - 0x80000000);
+		resource->end = resource->start + pmemlen - 1;
+
+		pr_info("persistent memory: start=0x%x  end=0x%x\n",
+			resource->start, resource->end);
+	}
+}
+
+/*
+ *
+ * RESOURCE ACCESS FUNCTIONS
+ *
+ */
+
+/**
+ * asic_resource_get - retrieves parameters for a platform resource.
+ * @name:	string to match resource
+ *
+ * Returns a pointer to a struct resource corresponding to the given name.
+ *
+ * CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
+ * as this function name is already declared
+ */
+struct resource *asic_resource_get(const char *name)
+{
+	int i;
+
+	for (i = 0; gp_resources[i].flags != 0; i++) {
+		if (strcmp(gp_resources[i].name, name) == 0)
+			return &gp_resources[i];
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(asic_resource_get);
+
+/**
+ * platform_release_memory - release pre-allocated memory
+ * @ptr:	pointer to memory to release
+ * @size:	size of resource
+ *
+ * This must only be called for memory allocated or reserved via the boot
+ * memory allocator.
+ */
+void platform_release_memory(void *ptr, int size)
+{
+	unsigned long addr;
+	unsigned long end;
+
+	addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK;
+	end = ((unsigned long)ptr + size) & PAGE_MASK;
+
+	for (; addr < end; addr += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(__va(addr)));
+		init_page_count(virt_to_page(__va(addr)));
+		free_page((unsigned long)__va(addr));
+	}
+}
+EXPORT_SYMBOL(platform_release_memory);
+
+/*
+ *
+ * FEATURE AVAILABILITY FUNCTIONS
+ *
+ */
+int platform_supports_dvr(void)
+{
+	return (platform_features & DVR_CAPABLE) != 0;
+}
+
+int platform_supports_ffs(void)
+{
+	return (platform_features & FFS_CAPABLE) != 0;
+}
+
+int platform_supports_pcie(void)
+{
+	return (platform_features & PCIE_CAPABLE) != 0;
+}
+
+int platform_supports_display(void)
+{
+	return (platform_features & DISPLAY_CAPABLE) != 0;
+}
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
new file mode 100644
index 0000000..80b2eed
--- /dev/null
+++ b/arch/mips/powertv/asic/asic_int.c
@@ -0,0 +1,125 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Portions copyright (C) 2009  Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the PowerTV
+ * platform.
+ *
+ * The interrupt controller is located in the South Bridge a PIIX4 device
+ * with two internal 82C95 interrupt controllers.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+
+#include <asm/irq_cpu.h>
+#include <linux/io.h>
+#include <asm/irq_regs.h>
+#include <asm/mips-boards/generic.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static DEFINE_SPINLOCK(asic_irq_lock);
+
+static inline int get_int(void)
+{
+	unsigned long flags;
+	int irq;
+
+	spin_lock_irqsave(&asic_irq_lock, flags);
+
+	irq = (asic_read(int_int_scan) >> 4) - 1;
+
+	if (irq == 0 || irq >= NR_IRQS)
+		irq = -1;
+
+	spin_unlock_irqrestore(&asic_irq_lock, flags);
+
+	return irq;
+}
+
+static void asic_irqdispatch(void)
+{
+	int irq;
+
+	irq = get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
+
+	do_IRQ(irq);
+}
+
+static inline int clz(unsigned long x)
+{
+	__asm__(
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+	return fls(pending) - 1 + CAUSEB_IP;
+}
+
+/*
+ * TODO: check how it works under EIC mode.
+ */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == CAUSEF_IP3)
+		asic_irqdispatch();
+	else if (irq >= 0)
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	asic_irq_init();
+
+	/*
+	 * Initialize interrupt exception vectors.
+	 */
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler(i, asic_irqdispatch);
+	}
+}
diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c
new file mode 100644
index 0000000..b54d244
--- /dev/null
+++ b/arch/mips/powertv/asic/irq_asic.c
@@ -0,0 +1,116 @@
+/*
+ * Portions copyright (C) 2005-2009 Scientific Atlanta
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * Modified from arch/mips/kernel/irq-rm7000.c:
+ * Copyright (C) 2003 Ralf Baechle
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static inline void unmask_asic_irq(unsigned int irq)
+{
+	unsigned long enable_bit;
+
+	enable_bit = (1 << (irq & 0x1f));
+
+	switch (irq >> 5) {
+	case 0:
+		asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
+		break;
+	case 1:
+		asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
+		break;
+	case 2:
+		asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
+		break;
+	case 3:
+		asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void mask_asic_irq(unsigned int irq)
+{
+	unsigned long disable_mask;
+
+	disable_mask = ~(1 << (irq & 0x1f));
+
+	switch (irq >> 5) {
+	case 0:
+		asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
+		break;
+	case 1:
+		asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
+		break;
+	case 2:
+		asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
+		break;
+	case 3:
+		asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static struct irq_chip asic_irq_chip = {
+	.name = "ASIC Level",
+	.ack = mask_asic_irq,
+	.mask = mask_asic_irq,
+	.mask_ack = mask_asic_irq,
+	.unmask = unmask_asic_irq,
+	.eoi = unmask_asic_irq,
+};
+
+void __init asic_irq_init(void)
+{
+	int i;
+
+	/* set priority to 0 */
+	write_c0_status(read_c0_status() & ~(0x0000fc00));
+
+	asic_write(0, ien_int_0);
+	asic_write(0, ien_int_1);
+	asic_write(0, ien_int_2);
+	asic_write(0, ien_int_3);
+
+	asic_write(0x0fffffff, int_level_3_3);
+	asic_write(0xffffffff, int_level_3_2);
+	asic_write(0xffffffff, int_level_3_1);
+	asic_write(0xffffffff, int_level_3_0);
+	asic_write(0xffffffff, int_level_2_3);
+	asic_write(0xffffffff, int_level_2_2);
+	asic_write(0xffffffff, int_level_2_1);
+	asic_write(0xffffffff, int_level_2_0);
+	asic_write(0xffffffff, int_level_1_3);
+	asic_write(0xffffffff, int_level_1_2);
+	asic_write(0xffffffff, int_level_1_1);
+	asic_write(0xffffffff, int_level_1_0);
+	asic_write(0xffffffff, int_level_0_3);
+	asic_write(0xffffffff, int_level_0_2);
+	asic_write(0xffffffff, int_level_0_1);
+	asic_write(0xffffffff, int_level_0_0);
+
+	asic_write(0xf, int_int_scan);
+
+	/*
+	 * Initialize interrupt handlers.
+	 */
+	for (i = 0; i < NR_IRQS; i++)
+		set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
+}
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
new file mode 100644
index 0000000..cd5b76a
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-calliope.c
@@ -0,0 +1,620 @@
+/*
+ * Memory pre-allocations for Calliope boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * NON_DVR_CAPABLE CALLIOPE RESOURCES
+ */
+struct resource non_dvr_calliope_resources[] __initdata =
+{
+	/*
+	 * VIDEO / LX1
+	 */
+	{
+		.name   = "ST231aImage",     	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x24200000 - 1,	/*2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",   /*8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24202000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		.end    = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Sysaudio Driver
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * STAVEM driver/STAPI
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x00000000,
+		.end    = 0x00600000 - 1,	/* 6 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DOCSIS Subsystem
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x22000000,
+		.end    = 0x22700000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * GHW HAL Driver
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x22700000,
+		.end    = 0x23500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * multi com buffer area
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x23700000,
+		.end    = 0x23720000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DMA Ring buffer (don't need recording buffers)
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit0
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x00000000,
+		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * PMEM
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Smartcard
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE + 0x400 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Synopsys GMAC Memory Region
+	 */
+	{
+		.name   = "GMAC",
+		.start  = 0x00000000,
+		.end    = 0x00010000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Add other resources here
+	 *
+	 */
+	{ },
+};
+
+struct resource non_dvr_vz_calliope_resources[] __initdata =
+{
+	/*
+	 * VIDEO / LX1
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x24200000 - 1, /*2 Meg */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24202000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x22202000,
+		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Sysaudio Driver
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * STAVEM driver/STAPI
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x20300000,
+		.end    = 0x20620000-1,  /*3.125 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * GHW HAL Driver
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x20100000,
+		.end    = 0x20300000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * multi com buffer area
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x23900000,
+		.end    = 0x23920000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DMA Ring buffer
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit0
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * PMEM
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Smartcard
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE+0x400 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Synopsys GMAC Memory Region
+	 */
+	{
+		.name   = "GMAC",
+		.start  = 0x00000000,
+		.end    = 0x00010000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
+
+struct resource non_dvr_vze_calliope_resources[] __initdata =
+{
+	/*
+	 * VIDEO / LX1
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x22000000,
+		.end    = 0x22200000 - 1,	/*2  Meg */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
+		.start  = 0x22200000,
+		.end    = 0x22202000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x22202000,
+		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Sysaudio Driver
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * STAVEM driver/STAPI
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x20396000,
+		.end    = 0x206B6000 - 1,		/* 3.125 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * GHW HAL Driver
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x20100000,
+		.end    = 0x20396000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * multi com buffer area
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x206B6000,
+		.end    = 0x206D6000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DMA Ring buffer
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit0
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * PMEM
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Smartcard
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE+0x400 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Synopsys GMAC Memory Region
+	 */
+	{
+		.name   = "GMAC",
+		.start  = 0x00000000,
+		.end    = 0x00010000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
+
+struct resource non_dvr_vzf_calliope_resources[] __initdata =
+{
+	/*
+	 * VIDEO / LX1
+	 */
+	{
+		.name   = "ST231aImage",	/*Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x24200000 - 1,	/*2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/*8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24202000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		/* ~19.4 (21.5MiB - (2MiB + 8KiB)) */
+		.end    = 0x25580000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Sysaudio Driver
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * STAVEM driver/STAPI
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x00000000,
+		.end    = 0x00480000 - 1,  /* 4.5 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * GHW HAL Driver
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x22700000,
+		.end    = 0x23500000 - 1, /* 14 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * multi com buffer area
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x23700000,
+		.end    = 0x23720000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DMA Ring buffer (don't need recording buffers)
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit0
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,  /* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit1
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,  /* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x00000000,
+		.end    = 0x002c4c00 - 1,  /* 945K * 3 for playback */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * PMEM
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Smartcard
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE + 0x400 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Synopsys GMAC Memory Region
+	 */
+	{
+		.name   = "GMAC",
+		.start  = 0x00000000,
+		.end    = 0x00010000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
new file mode 100644
index 0000000..45a5c3e
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-cronus.c
@@ -0,0 +1,608 @@
+/*
+ * Memory pre-allocations for Cronus boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * DVR_CAPABLE CRONUS RESOURCES
+ */
+struct resource dvr_cronus_resources[] __initdata =
+{
+	/*
+	 *
+	 * VIDEO1 / LX1
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x241FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24201FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory2",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x64180000 - 1,  /* 12 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x00280000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x64AD4000,
+		.end    = 0x64AD5000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * ITFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "ITFS",
+		.start  = 0x64180000,
+		/* 815,104 bytes each for 2 ITFS partitions. */
+		.end    = 0x6430DFFF,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x6430E000,
+		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
+		.end    = 0x64AD0000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "AvfsFileSys",
+		.start  = 0x64AD0000,
+		.end    = 0x64AD1000 - 1,  /* 4K */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x64AD1000,
+		.end    = 0x64AD3800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
+
+/*
+ * NON_DVR_CAPABLE CRONUS RESOURCES
+ */
+struct resource non_dvr_cronus_resources[] __initdata =
+{
+	/*
+	 *
+	 * VIDEO1 / LX1
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x241FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24201FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory2",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x64180000 - 1,  /* 12 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x64AD4000,
+		.end    = 0x64AD5000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x6430E000,
+		.end    = 0x645D2C00 - 1,  /* 945K * 3 for playback */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x64AD1000,
+		.end    = 0x64AD3800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
new file mode 100644
index 0000000..23a90561
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-cronuslite.c
@@ -0,0 +1,290 @@
+/*
+ * Memory pre-allocations for Cronus Lite boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * NON_DVR_CAPABLE CRONUSLITE RESOURCES
+ */
+struct resource non_dvr_cronuslite_resources[] __initdata =
+{
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x63B80000 - 1,  /* 6 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x63B83000,
+		.end    = 0x63B84000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x63B84000,
+		.end    = 0x63E48C00 - 1,  /* 945K * 3 for playback */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x63B80000,
+		.end    = 0x63B82800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE + 0x400 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
new file mode 100644
index 0000000..018d451
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-zeus.c
@@ -0,0 +1,459 @@
+/*
+ * Memory pre-allocations for Zeus boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * DVR_CAPABLE RESOURCES
+ */
+struct resource dvr_zeus_resources[] __initdata =
+{
+	/*
+	 *
+	 * VIDEO1 / LX1
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x20000000,
+		.end    = 0x201FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x20200000,
+		.end    = 0x20201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x20202000,
+		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x30000000,
+		.end    = 0x301FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x30200000,
+		.end    = 0x30201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory2",
+		.start  = 0x30202000,
+		.end    = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x00000000,
+		.end    = 0x00c00000 - 1,	/* 12 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x40100000,
+		.end    = 0x407fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x46900000,
+		.end    = 0x47700000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x47900000,
+		.end    = 0x47920000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x00280000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,	/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,	/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * ITFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "ITFS",
+		.start  = 0x00000000,
+		/* 815,104 bytes each for 2 ITFS partitions. */
+		.end    = 0x0018DFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * AVFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x00000000,
+		/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+		.end    = 0x007c2000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "AvfsFileSys",
+		.start  = 0x00000000,
+		.end    = 0x00001000 - 1,  /* 4K */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
+
+/*
+ * NON_DVR_CAPABLE ZEUS RESOURCES
+ */
+struct resource non_dvr_zeus_resources[] __initdata =
+{
+	/*
+	 * VIDEO1 / LX1
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x20000000,
+		.end    = 0x201FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x20200000,
+		.end    = 0x20201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x20202000,
+		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Sysaudio Driver
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * STAVEM driver/STAPI
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x00000000,
+		.end    = 0x00600000 - 1,	/* 6 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DOCSIS Subsystem
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x40100000,
+		.end    = 0x407fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * GHW HAL Driver
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x46900000,
+		.end    = 0x47700000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * multi com buffer area
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x47900000,
+		.end    = 0x47920000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * DMA Ring buffer
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x00280000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Display bins buffer for unit0
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x00000000,
+		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * PMEM
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * Smartcard
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x00000000,
+		.end    = 0x2800 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE + 0x400 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c
new file mode 100644
index 0000000..98d73cb
--- /dev/null
+++ b/arch/mips/powertv/cmdline.c
@@ -0,0 +1,52 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include "init.h"
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  __init prom_init_cmdline(void)
+{
+	int len;
+
+	if (prom_argc != 1)
+		return;
+
+	len = strlen(arcs_cmdline);
+
+	arcs_cmdline[len] = ' ';
+
+	strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
+		COMMAND_LINE_SIZE - len - 1);
+}
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
new file mode 100644
index 0000000..5f4e4c3
--- /dev/null
+++ b/arch/mips/powertv/init.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library initialisation code.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mach-powertv/asic.h>
+
+#include "init.h"
+
+int prom_argc;
+int *_prom_argv, *_prom_envp;
+unsigned long _prom_memsize;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension, if running in 64-bit mode.
+ */
+#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
+
+char *prom_getenv(char *envname)
+{
+	char *result = NULL;
+
+	if (_prom_envp != NULL) {
+		/*
+		 * Return a pointer to the given environment variable.
+		 * In 64-bit mode: we're using 64-bit pointers, but all pointers
+		 * in the PROM structures are only 32-bit, so we need some
+		 * workarounds, if we are running in 64-bit mode.
+		 */
+		int i, index = 0;
+
+		i = strlen(envname);
+
+		while (prom_envp(index)) {
+			if (strncmp(envname, prom_envp(index), i) == 0) {
+				result = prom_envp(index + 1);
+				break;
+			}
+			index += 2;
+		}
+	}
+
+	return result;
+}
+
+/* TODO: Verify on linux-mips mailing list that the following two  */
+/* functions are correct                                           */
+/* TODO: Copy NMI and EJTAG exception vectors to memory from the   */
+/* BootROM exception vectors. Flush their cache entries. test it.  */
+
+static void __init mips_nmi_setup(void)
+{
+	void *base;
+#if defined(CONFIG_CPU_MIPS32_R1)
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa80) :
+		(void *)(CAC_BASE + 0x380);
+#elif defined(CONFIG_CPU_MIPS32_R2)
+	base = (void *)0xbfc00000;
+#else
+#error NMI exception handler address not defined
+#endif
+}
+
+static void __init mips_ejtag_setup(void)
+{
+	void *base;
+
+#if defined(CONFIG_CPU_MIPS32_R1)
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa00) :
+		(void *)(CAC_BASE + 0x300);
+#elif defined(CONFIG_CPU_MIPS32_R2)
+	base = (void *)0xbfc00480;
+#else
+#error EJTAG exception handler address not defined
+#endif
+}
+
+void __init prom_init(void)
+{
+	prom_argc = fw_arg0;
+	_prom_argv = (int *) fw_arg1;
+	_prom_envp = (int *) fw_arg2;
+	_prom_memsize = (unsigned long) fw_arg3;
+
+	board_nmi_handler_setup = mips_nmi_setup;
+	board_ejtag_handler_setup = mips_ejtag_setup;
+
+	pr_info("\nLINUX started...\n");
+	prom_init_cmdline();
+	configure_platform();
+	prom_meminit();
+
+#ifndef CONFIG_BOOTLOADER_DRIVER
+	pr_info("\nBootloader driver isn't loaded...\n");
+#endif
+}
diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h
new file mode 100644
index 0000000..7af6bf2
--- /dev/null
+++ b/arch/mips/powertv/init.h
@@ -0,0 +1,28 @@
+/*
+ * Definitions from powertv init.c file
+ *
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_INIT_H
+#define _POWERTV_INIT_H
+extern int prom_argc;
+extern int *_prom_argv;
+extern unsigned long _prom_memsize;
+#endif
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
new file mode 100644
index 0000000..28d0660
--- /dev/null
+++ b/arch/mips/powertv/memory.c
@@ -0,0 +1,186 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Apparently originally from arch/mips/malta-memory.c. Modified to work
+ * with the PowerTV bootloader.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mips-boards/prom.h>
+
+#include "init.h"
+
+/* Memory constants */
+#define KIBIBYTE(n)		((n) * 1024)	/* Number of kibibytes */
+#define MEBIBYTE(n)		((n) * KIBIBYTE(1024)) /* Number of mebibytes */
+#define DEFAULT_MEMSIZE		MEBIBYTE(256)	/* If no memsize provided */
+#define LOW_MEM_MAX		MEBIBYTE(252)	/* Max usable low mem */
+#define RES_BOOTLDR_MEMSIZE	MEBIBYTE(1)	/* Memory reserved for bldr */
+#define BOOT_MEM_SIZE		KIBIBYTE(256)	/* Memory reserved for bldr */
+#define PHYS_MEM_START		0x10000000	/* Start of physical memory */
+
+unsigned long ptv_memsize;
+
+char __initdata cmdline[COMMAND_LINE_SIZE];
+
+void __init prom_meminit(void)
+{
+	char *memsize_str;
+	unsigned long memsize = 0;
+	unsigned int physend;
+	char *ptr;
+	int low_mem;
+	int high_mem;
+
+	/* Check the command line first for a memsize directive */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+		ptr = strstr(ptr, " memsize=");
+
+	if (ptr) {
+		memsize = memparse(ptr + 8, &ptr);
+	} else {
+		/* otherwise look in the environment */
+		memsize_str = prom_getenv("memsize");
+
+		if (memsize_str != NULL) {
+			pr_info("prom memsize = %s\n", memsize_str);
+			memsize = simple_strtol(memsize_str, NULL, 0);
+		}
+
+		if (memsize == 0) {
+			if (_prom_memsize != 0) {
+				memsize = _prom_memsize;
+				pr_info("_prom_memsize = 0x%lx\n", memsize);
+				/* add in memory that the bootloader doesn't
+				 * report */
+				memsize += BOOT_MEM_SIZE;
+			} else {
+				memsize = DEFAULT_MEMSIZE;
+				pr_info("Memsize not passed by bootloader, "
+					"defaulting to 0x%lx\n", memsize);
+			}
+		}
+	}
+
+	/* Store memsize for diagnostic purposes */
+	ptv_memsize = memsize;
+
+	physend = PFN_ALIGN(&_end) - 0x80000000;
+	if (memsize > LOW_MEM_MAX) {
+		low_mem = LOW_MEM_MAX;
+		high_mem = memsize - low_mem;
+	} else {
+		low_mem = memsize;
+		high_mem = 0;
+	}
+
+/*
+ * TODO: We will use the hard code for memory configuration until
+ * the bootloader releases their device tree to us.
+ */
+	/*
+	 * Add the memory reserved for use by the bootloader to the
+	 * memory map.
+	 */
+	add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE,
+		BOOT_MEM_RESERVED);
+#ifdef CONFIG_HIGHMEM_256_128
+	/*
+	 * Add memory in low for general use by the kernel and its friends
+	 * (like drivers, applications, etc).
+	 */
+	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+		LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+	/*
+	 * Add the memory reserved for reset vector.
+	 */
+	add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
+	/*
+	 * Add the memory reserved.
+	 */
+	add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED);
+	/*
+	 * Add memory in high for general use by the kernel and its friends
+	 * (like drivers, applications, etc).
+	 *
+	 * 75MB is reserved for devices which are using the memory in high.
+	 */
+	add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
+		BOOT_MEM_RAM);
+#elif defined CONFIG_HIGHMEM_128_128
+	/*
+	 * Add memory in low for general use by the kernel and its friends
+	 * (like drivers, applications, etc).
+	 */
+	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+		MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+	/*
+	 * Add the memory reserved.
+	 */
+	add_memory_region(PHYS_MEM_START + MEBIBYTE(128),
+		MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED);
+	/*
+	 * Add memory in high for general use by the kernel and its friends
+	 * (like drivers, applications, etc).
+	 *
+	 * 75MB is reserved for devices which are using the memory in high.
+	 */
+	add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
+		BOOT_MEM_RAM);
+#else
+	/* Add low memory regions for either:
+	 *   - no-highmemory configuration case -OR-
+	 *   - highmemory "HIGHMEM_LOWBANK_ONLY" case
+	 */
+	/*
+	 * Add memory for general use by the kernel and its friends
+	 * (like drivers, applications, etc).
+	 */
+	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+		low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+	/*
+	 * Add the memory reserved for reset vector.
+	 */
+	add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+	unsigned long addr;
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+			continue;
+
+		addr = boot_mem_map.map[i].addr;
+		free_init_pages("prom memory",
+				addr, addr + boot_mem_map.map[i].size);
+	}
+}
diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile
new file mode 100644
index 0000000..f5c6246
--- /dev/null
+++ b/arch/mips/powertv/pci/Makefile
@@ -0,0 +1,21 @@
+#
+# Copyright (C) 2009  Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+obj-$(CONFIG_PCI)	+= fixup-powertv.o
+
+EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c
new file mode 100644
index 0000000..726bc2e
--- /dev/null
+++ b/arch/mips/powertv/pci/fixup-powertv.c
@@ -0,0 +1,36 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mach-powertv/interrupts.h>
+#include "powertv-pci.h"
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return asic_pcie_map_irq(dev, slot, pin);
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/*
+ * asic_pcie_map_irq
+ *
+ * Parameters:
+ * *dev - pointer to a pci_dev structure  (not used)
+ * slot - slot number  (not used)
+ * pin - pin number  (not used)
+ *
+ * Return Value:
+ * Returns: IRQ number (always the PCI Express IRQ number)
+ *
+ * Description:
+ * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
+ *
+ */
+int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return irq_pciexp;
+}
+EXPORT_SYMBOL(asic_pcie_map_irq);
diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h
new file mode 100644
index 0000000..1b5886b
--- /dev/null
+++ b/arch/mips/powertv/pci/powertv-pci.h
@@ -0,0 +1,31 @@
+/*
+ *				powertv-pci.c
+ *
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+/*
+ * Local definitions for the powertv PCI code
+ */
+
+#ifndef _POWERTV_PCI_POWERTV_PCI_H_
+#define _POWERTV_PCI_POWERTV_PCI_H_
+extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+extern int asic_pcie_init(void);
+extern int asic_pcie_init(void);
+
+extern int log_level;
+#endif
diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h
new file mode 100644
index 0000000..d94c543
--- /dev/null
+++ b/arch/mips/powertv/powertv-clock.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_POWERTV_CLOCK_H
+#define _POWERTV_POWERTV_CLOCK_H
+extern int powertv_clockevent_init(void);
+extern void powertv_clocksource_init(void);
+extern unsigned int mips_get_pll_freq(void);
+#endif
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
new file mode 100644
index 0000000..bd8ebf1
--- /dev/null
+++ b/arch/mips/powertv/powertv_setup.c
@@ -0,0 +1,351 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <linux/notifier.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/ctype.h>
+
+#include <linux/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/dma.h>
+#include <linux/time.h>
+#include <asm/traps.h>
+#include <asm/asm-offsets.h>
+#include "reset.h"
+
+#define VAL(n)		STR(n)
+
+/*
+ * Macros for loading addresses and storing registers:
+ * PTR_LA	Load the address into a register
+ * LONG_S	Store the full width of the given register.
+ * LONG_L	Load the full width of the given register
+ * PTR_ADDIU	Add a constant value to a register used as a pointer
+ * REG_SIZE	Number of 8-bit bytes in a full width register
+ */
+#ifdef CONFIG_64BIT
+#warning TODO: 64-bit code needs to be verified
+#define PTR_LA		"dla	"
+#define LONG_S		"sd	"
+#define LONG_L		"ld	"
+#define PTR_ADDIU	"daddiu	"
+#define REG_SIZE	"8"		/* In bytes */
+#endif
+
+#ifdef CONFIG_32BIT
+#define PTR_LA		"la	"
+#define LONG_S		"sw	"
+#define LONG_L		"lw	"
+#define PTR_ADDIU	"addiu	"
+#define REG_SIZE	"4"		/* In bytes */
+#endif
+
+static struct pt_regs die_regs;
+static bool have_die_regs;
+
+static void register_panic_notifier(void);
+static int panic_handler(struct notifier_block *notifier_block,
+	unsigned long event, void *cause_string);
+
+const char *get_system_type(void)
+{
+	return "PowerTV";
+}
+
+void __init plat_mem_setup(void)
+{
+	panic_on_oops = 1;
+	register_panic_notifier();
+
+#if 0
+	mips_pcibios_init();
+#endif
+	mips_reboot_setup();
+}
+
+/*
+ * Install a panic notifier for platform-specific diagnostics
+ */
+static void register_panic_notifier()
+{
+	static struct notifier_block panic_notifier = {
+		.notifier_call = panic_handler,
+		.next = NULL,
+		.priority	= INT_MAX
+	};
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
+}
+
+static int panic_handler(struct notifier_block *notifier_block,
+	unsigned long event, void *cause_string)
+{
+	struct pt_regs	my_regs;
+
+	/* Save all of the registers */
+	{
+		unsigned long	at, v0, v1; /* Must be on the stack */
+
+		/* Start by saving $at and v0 on the stack. We use $at
+		 * ourselves, but it looks like the compiler may use v0 or v1
+		 * to load the address of the pt_regs structure. We'll come
+		 * back later to store the registers in the pt_regs
+		 * structure. */
+		__asm__ __volatile__ (
+			".set	noat\n"
+			LONG_S		"$at, %[at]\n"
+			LONG_S		"$2, %[v0]\n"
+			LONG_S		"$3, %[v1]\n"
+		:
+			[at] "=m" (at),
+			[v0] "=m" (v0),
+			[v1] "=m" (v1)
+		:
+		:	"at"
+		);
+
+		__asm__ __volatile__ (
+			".set	noat\n"
+			"move		$at, %[pt_regs]\n"
+
+			/* Argument registers */
+			LONG_S		"$4, " VAL(PT_R4) "($at)\n"
+			LONG_S		"$5, " VAL(PT_R5) "($at)\n"
+			LONG_S		"$6, " VAL(PT_R6) "($at)\n"
+			LONG_S		"$7, " VAL(PT_R7) "($at)\n"
+
+			/* Temporary regs */
+			LONG_S		"$8, " VAL(PT_R8) "($at)\n"
+			LONG_S		"$9, " VAL(PT_R9) "($at)\n"
+			LONG_S		"$10, " VAL(PT_R10) "($at)\n"
+			LONG_S		"$11, " VAL(PT_R11) "($at)\n"
+			LONG_S		"$12, " VAL(PT_R12) "($at)\n"
+			LONG_S		"$13, " VAL(PT_R13) "($at)\n"
+			LONG_S		"$14, " VAL(PT_R14) "($at)\n"
+			LONG_S		"$15, " VAL(PT_R15) "($at)\n"
+
+			/* "Saved" registers */
+			LONG_S		"$16, " VAL(PT_R16) "($at)\n"
+			LONG_S		"$17, " VAL(PT_R17) "($at)\n"
+			LONG_S		"$18, " VAL(PT_R18) "($at)\n"
+			LONG_S		"$19, " VAL(PT_R19) "($at)\n"
+			LONG_S		"$20, " VAL(PT_R20) "($at)\n"
+			LONG_S		"$21, " VAL(PT_R21) "($at)\n"
+			LONG_S		"$22, " VAL(PT_R22) "($at)\n"
+			LONG_S		"$23, " VAL(PT_R23) "($at)\n"
+
+			/* Add'l temp regs */
+			LONG_S		"$24, " VAL(PT_R24) "($at)\n"
+			LONG_S		"$25, " VAL(PT_R25) "($at)\n"
+
+			/* Kernel temp regs */
+			LONG_S		"$26, " VAL(PT_R26) "($at)\n"
+			LONG_S		"$27, " VAL(PT_R27) "($at)\n"
+
+			/* Global pointer, stack pointer, frame pointer and
+			 * return address */
+			LONG_S		"$gp, " VAL(PT_R28) "($at)\n"
+			LONG_S		"$sp, " VAL(PT_R29) "($at)\n"
+			LONG_S		"$fp, " VAL(PT_R30) "($at)\n"
+			LONG_S		"$ra, " VAL(PT_R31) "($at)\n"
+
+			/* Now we can get the $at and v0 registers back and
+			 * store them */
+			LONG_L		"$8, %[at]\n"
+			LONG_S		"$8, " VAL(PT_R1) "($at)\n"
+			LONG_L		"$8, %[v0]\n"
+			LONG_S		"$8, " VAL(PT_R2) "($at)\n"
+			LONG_L		"$8, %[v1]\n"
+			LONG_S		"$8, " VAL(PT_R3) "($at)\n"
+		:
+		:
+			[at] "m" (at),
+			[v0] "m" (v0),
+			[v1] "m" (v1),
+			[pt_regs] "r" (&my_regs)
+		:	"at", "t0"
+		);
+
+		/* Set the current EPC value to be the current location in this
+		 * function */
+		__asm__ __volatile__ (
+			".set	noat\n"
+		"1:\n"
+			PTR_LA		"$at, 1b\n"
+			LONG_S		"$at, %[cp0_epc]\n"
+		:
+			[cp0_epc] "=m" (my_regs.cp0_epc)
+		:
+		:	"at"
+		);
+
+		my_regs.cp0_cause = read_c0_cause();
+		my_regs.cp0_status = read_c0_status();
+	}
+
+#ifdef CONFIG_DIAGNOSTICS
+	failure_report((char *) cause_string,
+		have_die_regs ? &die_regs : &my_regs);
+	have_die_regs = false;
+#else
+	pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
+		"zzzz... \n");
+#endif
+
+	return NOTIFY_DONE;
+}
+
+/**
+ * Platform-specific handling of oops
+ * @str:	Pointer to the oops string
+ * @regs:	Pointer to the oops registers
+ * All we do here is to save the registers for subsequent printing through
+ * the panic notifier.
+ */
+void platform_die(const char *str, const struct pt_regs *regs)
+{
+	/* If we already have saved registers, don't overwrite them as they
+	 * they apply to the initial fault */
+
+	if (!have_die_regs) {
+		have_die_regs = true;
+		die_regs = *regs;
+	}
+}
+
+/* Information about the RF MAC address, if one was supplied on the
+ * command line. */
+static bool have_rfmac;
+static u8 rfmac[ETH_ALEN];
+
+static int rfmac_param(char *p)
+{
+	u8	*q;
+	bool	is_high_nibble;
+	int	c;
+
+	/* Skip a leading "0x", if present */
+	if (*p == '0' && *(p+1) == 'x')
+		p += 2;
+
+	q = rfmac;
+	is_high_nibble = true;
+
+	for (c = (unsigned char) *p++;
+		isxdigit(c) && q - rfmac < ETH_ALEN;
+		c = (unsigned char) *p++) {
+		int	nibble;
+
+		nibble = (isdigit(c) ? (c - '0') :
+			(isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
+
+		if (is_high_nibble)
+			*q = nibble << 4;
+		else
+			*q++ |= nibble;
+
+		is_high_nibble = !is_high_nibble;
+	}
+
+	/* If we parsed all the way to the end of the parameter value and
+	 * parsed all ETH_ALEN bytes, we have a usable RF MAC address */
+	have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
+
+	return 0;
+}
+
+early_param("rfmac", rfmac_param);
+
+/*
+ * Generate an Ethernet MAC address that has a good chance of being unique.
+ * @addr:	Pointer to six-byte array containing the Ethernet address
+ * Generates an Ethernet MAC address that is highly likely to be unique for
+ * this particular system on a network with other systems of the same type.
+ *
+ * The problem we are solving is that, when random_ether_addr() is used to
+ * generate MAC addresses at startup, there isn't much entropy for the random
+ * number generator to use and the addresses it produces are fairly likely to
+ * be the same as those of other identical systems on the same local network.
+ * This is true even for relatively small numbers of systems (for the reason
+ * why, see the Wikipedia entry for "Birthday problem" at:
+ *	http://en.wikipedia.org/wiki/Birthday_problem
+ *
+ * The good news is that we already have a MAC address known to be unique, the
+ * RF MAC address. The bad news is that this address is already in use on the
+ * RF interface. Worse, the obvious trick, taking the RF MAC address and
+ * turning on the locally managed bit, has already been used for other devices.
+ * Still, this does give us something to work with.
+ *
+ * The approach we take is:
+ * 1.	If we can't get the RF MAC Address, just call random_ether_addr.
+ * 2.	Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
+ *	bits of the new address. This is very likely to be unique, except for
+ *	the current box.
+ * 3.	To avoid using addresses already on the current box, we set the top
+ *	six bits of the address with a value different from any currently
+ *	registered Scientific Atlanta organizationally unique identifyer
+ *	(OUI). This avoids duplication with any addresses on the system that
+ *	were generated from valid Scientific Atlanta-registered address by
+ *	simply flipping the locally managed bit.
+ * 4.	We aren't generating a multicast address, so we leave the multicast
+ *	bit off. Since we aren't using a registered address, we have to set
+ *	the locally managed bit.
+ * 5.	We then randomly generate the remaining 16-bits. This does two
+ *	things:
+ *	a.	It allows us to call this function for more than one device
+ *		in this system
+ *	b.	It ensures that things will probably still work even if
+ *		some device on the device network has a locally managed
+ *		address that matches the top six bits from step 2.
+ */
+void platform_random_ether_addr(u8 addr[ETH_ALEN])
+{
+	const int num_random_bytes = 2;
+	const unsigned char non_sciatl_oui_bits = 0xc0u;
+	const unsigned char mac_addr_locally_managed = (1 << 1);
+
+	if (!have_rfmac) {
+		pr_warning("rfmac not available on command line; "
+			"generating random MAC address\n");
+		random_ether_addr(addr);
+	}
+
+	else {
+		int	i;
+
+		/* Set the first byte to something that won't match a Scientific
+		 * Atlanta OUI, is locally managed, and isn't a multicast
+		 * address */
+		addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
+
+		/* Get some bytes of random address information */
+		get_random_bytes(&addr[1], num_random_bytes);
+
+		/* Copy over the NIC-specific bits of the RF MAC address */
+		for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
+			addr[i] = rfmac[i];
+	}
+}
diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c
new file mode 100644
index 0000000..494c652
--- /dev/null
+++ b/arch/mips/powertv/reset.c
@@ -0,0 +1,65 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/pm.h>
+
+#include <linux/io.h>
+#include <asm/reboot.h>			/* Not included by linux/reboot.h */
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+#include <asm/mach-powertv/kbldr.h>
+#endif
+
+#include <asm/mach-powertv/asic_regs.h>
+#include "reset.h"
+
+static void mips_machine_restart(char *command);
+static void mips_machine_halt(void);
+
+static void mips_machine_restart(char *command)
+{
+#ifdef CONFIG_BOOTLOADER_DRIVER
+	/*
+	 * Call the bootloader's reset function to ensure
+	 * that persistent data is flushed before hard reset
+	 */
+	kbldr_SetCauseAndReset();
+#else
+	writel(0x1, asic_reg_addr(watchdog));
+#endif
+}
+
+static void mips_machine_halt(void)
+{
+#ifdef CONFIG_BOOTLOADER_DRIVER
+	/*
+	 * Call the bootloader's reset function to ensure
+	 * that persistent data is flushed before hard reset
+	 */
+	kbldr_SetCauseAndReset();
+#else
+	writel(0x1, asic_reg_addr(watchdog));
+#endif
+}
+
+void mips_reboot_setup(void)
+{
+	_machine_restart = mips_machine_restart;
+	_machine_halt = mips_machine_halt;
+	pm_power_off = mips_machine_halt;
+}
diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h
new file mode 100644
index 0000000..888fd09
--- /dev/null
+++ b/arch/mips/powertv/reset.h
@@ -0,0 +1,26 @@
+/*
+ * Definitions from powertv reset.c file
+ *
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_POWERTV_RESET_H
+#define _POWERTV_POWERTV_RESET_H
+extern void mips_reboot_setup(void);
+#endif
diff --git a/arch/mips/mipssim/sim_cmdline.c b/arch/mips/powertv/time.c
index 74240e1..1e0a5ef 100644
--- a/arch/mips/mipssim/sim_cmdline.c
+++ b/arch/mips/powertv/time.c
@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -14,19 +16,22 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
+ * Setting up the clock on the MIPS boards.
  */
+
 #include <linux/init.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
+#include <asm/mach-powertv/interrupts.h>
+#include <asm/time.h>
 
-extern char arcs_cmdline[];
+#include "powertv-clock.h"
 
-char * __init prom_getcmdline(void)
+unsigned int __cpuinit get_c0_compare_int(void)
 {
-	return arcs_cmdline;
+	return irq_mips_timer;
 }
 
-void  __init prom_init_cmdline(void)
+void __init plat_time_init(void)
 {
-	/* XXX: Get boot line from environment? */
+	powertv_clocksource_init();
+	r4k_clockevent_init();
 }
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index ad5bd10..d7c26d0 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag)
 
 void __init prom_setup_cmdline(void)
 {
-	static char cmd_line[CL_SIZE] __initdata;
+	static char cmd_line[COMMAND_LINE_SIZE] __initdata;
 	char *cp, *board;
 	int prom_argc;
 	char **prom_argv, **prom_envp;
@@ -115,7 +115,7 @@ void __init prom_setup_cmdline(void)
 		strcpy(cp, arcs_cmdline);
 		cp += strlen(arcs_cmdline);
 	}
-	cmd_line[CL_SIZE-1] = '\0';
+	cmd_line[COMMAND_LINE_SIZE - 1] = '\0';
 
 	strcpy(arcs_cmdline, cmd_line);
 }
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 1617241..da44ccb 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -50,9 +50,9 @@
 
 static char __init *decode_eisa_sig(unsigned long addr)
 {
-        static char sig_str[EISA_SIG_LEN];
+	static char sig_str[EISA_SIG_LEN] __initdata;
 	u8 sig[4];
-        u16 rev;
+	u16 rev;
 	int i;
 
 	for (i = 0; i < 4; i++) {
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index 0ecd5fe..383f11d 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
+#include <linux/ftrace.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/sgi/hpc3.h>
@@ -150,7 +151,7 @@ static void indy_local1_irqdispatch(void)
 
 extern void ip22_be_interrupt(int irq);
 
-static void indy_buserror_irq(void)
+static void __irq_entry indy_buserror_irq(void)
 {
 	int irq = SGI_BUSERR_IRQ;
 
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index b9a9313..5deeb68 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -67,7 +67,7 @@ void __init plat_mem_setup(void)
 	cserial = ArcGetEnvironmentVariable("ConsoleOut");
 
 	if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
-		static char options[8];
+		static char options[8] __initdata;
 		char *baud = ArcGetEnvironmentVariable("dbaud");
 		if (baud)
 			strcpy(options, baud);
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index c8f7d23..603fc91 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/time.h>
+#include <linux/ftrace.h>
 
 #include <asm/cpu.h>
 #include <asm/mipsregs.h>
@@ -115,7 +116,7 @@ __init void plat_time_init(void)
 }
 
 /* Generic SGI handler for (spurious) 8254 interrupts */
-void indy_8254timer_irq(void)
+void __irq_entry indy_8254timer_irq(void)
 {
 	int irq = SGI_8254_0_IRQ;
 	ULONG cnt;
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index c5a5d4a..3abd146 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -90,7 +90,7 @@ void __init plat_mem_setup(void)
 	{
 		char* con = ArcGetEnvironmentVariable("console");
 		if (con && *con == 'd') {
-			static char options[8];
+			static char options[8] __initdata;
 			char *baud = ArcGetEnvironmentVariable("dbaud");
 			if (baud)
 				strcpy(options, baud);
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index eb5396c..6343011 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -287,7 +287,7 @@ void __init prom_init(void)
 	 * boot console
 	 */
 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
+	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) {
 		if (argc >= 0) {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
@@ -318,7 +318,7 @@ void __init prom_init(void)
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 	/* Not sure this is needed, but it's the safe way. */
-	arcs_cmdline[CL_SIZE-1] = 0;
+	arcs_cmdline[COMMAND_LINE_SIZE-1] = 0;
 
 	prom_meminit();
 
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 7dd76fb..e698089 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -188,7 +188,7 @@ static void end_a20r_irq(unsigned int irq)
 }
 
 static struct irq_chip a20r_irq_type = {
-	.typename	= "A20R",
+	.name		= "A20R",
 	.ack		= mask_a20r_irq,
 	.mask		= mask_a20r_irq,
 	.mask_ack	= mask_a20r_irq,
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 74e6c67..51e62bb 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -214,7 +214,7 @@ static void end_pcimt_irq(unsigned int irq)
 }
 
 static struct irq_chip pcimt_irq_type = {
-	.typename = "PCIMT",
+	.name = "PCIMT",
 	.ack = disable_pcimt_irq,
 	.mask = disable_pcimt_irq,
 	.mask_ack = disable_pcimt_irq,
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 071a957..f4699d3 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -176,7 +176,7 @@ void end_pcit_irq(unsigned int irq)
 }
 
 static struct irq_chip pcit_irq_type = {
-	.typename = "PCIT",
+	.name = "PCIT",
 	.ack = disable_pcit_irq,
 	.mask = disable_pcit_irq,
 	.mask_ack = disable_pcit_irq,
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 5e68781..46f0069 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -449,7 +449,7 @@ void end_rm200_irq(unsigned int irq)
 }
 
 static struct irq_chip rm200_irq_type = {
-	.typename = "RM200",
+	.name = "RM200",
 	.ack = disable_rm200_irq,
 	.mask = disable_rm200_irq,
 	.mask_ack = disable_rm200_irq,
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index a49272c..d16b462 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -60,7 +60,7 @@ static void __init sni_console_setup(void)
 	char *cdev;
 	char *baud;
 	int port;
-	static char options[8];
+	static char options[8] __initdata;
 
 	cdev = prom_getenv("console_dev");
 	if (strncmp(cdev, "tty", 3) == 0) {
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index d66802e..06e801c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void)
 	int argc;
 	int *argv32;
 	int i;			/* Always ignore the "-c" at argv[0] */
-	static char builtin[CL_SIZE] __initdata;
+	static char builtin[COMMAND_LINE_SIZE] __initdata;
 
 	if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
 		/*
@@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void)
 
 static void __init preprocess_cmdline(void)
 {
-	static char cmdline[CL_SIZE] __initdata;
+	static char cmdline[COMMAND_LINE_SIZE] __initdata;
 	char *s;
 
 	strcpy(cmdline, arcs_cmdline);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7678538..677cd53 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on ARCH_PXA
 
-config MTD_NAND_BASLER_EXCITE
-	tristate  "Support for NAND Flash on Basler eXcite"
-	depends on BASLER_EXCITE
-	help
-          This enables the driver for the NAND flash device found on the
-          Basler eXcite Smart Camera. If built as a module, the driver
-          will be named excite_nandflash.
-
 config MTD_NAND_CAFE
 	tristate "NAND support for OLPC CAFÉ chip"
 	depends on PCI
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 460a1f3..1407bd1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
deleted file mode 100644
index af6a6a5..0000000
--- a/drivers/mtd/nand/excite_nandflash.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
-*  Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
-*  Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
-*  Original code by Thies Moeller <thies.moeller@baslerweb.com>
-*
-*  This program is free software; you can redistribute it and/or modify
-*  it under the terms of the GNU General Public License as published by
-*  the Free Software Foundation; either version 2 of the License, or
-*  (at your option) any later version.
-*
-*  This program is distributed in the hope that it will be useful,
-*  but WITHOUT ANY WARRANTY; without even the implied warranty of
-*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-*  GNU General Public License for more details.
-*
-*  You should have received a copy of the GNU General Public License
-*  along with this program; if not, write to the Free Software
-*  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite_nandflash.h>
-
-#define EXCITE_NANDFLASH_VERSION "0.1"
-
-/* I/O register offsets */
-#define EXCITE_NANDFLASH_DATA_BYTE   0x00
-#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
-#define EXCITE_NANDFLASH_ADDR_BYTE   0x10
-#define EXCITE_NANDFLASH_CMD_BYTE    0x14
-
-/* prefix for debug output */
-static const char module_id[] = "excite_nandflash";
-
-/*
- * partition definition
- */
-static const struct mtd_partition partition_info[] = {
-	{
-		.name = "eXcite RootFS",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL
-	}
-};
-
-static inline const struct resource *
-excite_nand_get_resource(struct platform_device *d, unsigned long flags,
-			 const char *basename)
-{
-	char buf[80];
-
-	if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
-		return NULL;
-	return platform_get_resource_byname(d, flags, buf);
-}
-
-static inline void __iomem *
-excite_nand_map_regs(struct platform_device *d, const char *basename)
-{
-	void *result = NULL;
-	const struct resource *const r =
-	    excite_nand_get_resource(d, IORESOURCE_MEM, basename);
-
-	if (r)
-		result = ioremap_nocache(r->start, r->end + 1 - r->start);
-	return result;
-}
-
-/* controller and mtd information */
-struct excite_nand_drvdata {
-	struct mtd_info board_mtd;
-	struct nand_chip board_chip;
-	void __iomem *regs;
-	void __iomem *tgt;
-};
-
-/* Control function */
-static void excite_nand_control(struct mtd_info *mtd, int cmd,
-				       unsigned int ctrl)
-{
-	struct excite_nand_drvdata * const d =
-	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
-
-	switch (ctrl) {
-	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
-		break;
-	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
-		break;
-	case NAND_CTRL_CHANGE | NAND_NCE:
-		d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
-		break;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, d->tgt);
-}
-
-/* Return 0 if flash is busy, 1 if ready */
-static int excite_nand_devready(struct mtd_info *mtd)
-{
-	struct excite_nand_drvdata * const drvdata =
-	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
-
-	return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
-}
-
-/*
- * Called by device layer to remove the driver.
- * The binding to the mtd and all allocated
- * resources are released.
- */
-static int __devexit excite_nand_remove(struct platform_device *dev)
-{
-	struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if (unlikely(!this)) {
-		printk(KERN_ERR "%s: called %s without private data!!",
-		       module_id, __func__);
-		return -EINVAL;
-	}
-
-	/* first thing we need to do is release our mtd
-	 * then go through freeing the resource used
-	 */
-	nand_release(&this->board_mtd);
-
-	/* free the common resources */
-	iounmap(this->regs);
-	kfree(this);
-
-	DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
-	return 0;
-}
-
-/*
- * Called by device layer when it finds a device matching
- * one our driver can handle. This code checks to see if
- * it can allocate all necessary resources then calls the
- * nand layer to look for devices.
-*/
-static int __init excite_nand_probe(struct platform_device *pdev)
-{
-	struct excite_nand_drvdata *drvdata;	/* private driver data */
-	struct nand_chip *board_chip;	/* private flash chip data */
-	struct mtd_info *board_mtd;	/* mtd info for this board */
-	int scan_res;
-
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (unlikely(!drvdata)) {
-		printk(KERN_ERR "%s: no memory for drvdata\n",
-		       module_id);
-		return -ENOMEM;
-	}
-
-	/* bind private data into driver */
-	platform_set_drvdata(pdev, drvdata);
-
-	/* allocate and map the resource */
-	drvdata->regs =
-		excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
-
-	if (unlikely(!drvdata->regs)) {
-		printk(KERN_ERR "%s: cannot reserve register region\n",
-		       module_id);
-		kfree(drvdata);
-		return -ENXIO;
-	}
-	
-	drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
-
-	/* initialise our chip */
-	board_chip = &drvdata->board_chip;
-	board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
-		drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
-	board_chip->cmd_ctrl = excite_nand_control;
-	board_chip->dev_ready = excite_nand_devready;
-	board_chip->chip_delay = 25;
-	board_chip->ecc.mode = NAND_ECC_SOFT;
-
-	/* link chip to mtd */
-	board_mtd = &drvdata->board_mtd;
-	board_mtd->priv = board_chip;
-
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
-	scan_res = nand_scan(&drvdata->board_mtd, 1);
-
-	if (likely(!scan_res)) {
-		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
-		add_mtd_partitions(&drvdata->board_mtd, partition_info,
-				   ARRAY_SIZE(partition_info));
-	} else {
-		iounmap(drvdata->regs);
-		kfree(drvdata);
-		printk(KERN_ERR "%s: device scan failed\n", module_id);
-		return -EIO;
-	}
-	return 0;
-}
-
-static struct platform_driver excite_nand_driver = {
-	.driver = {
-		.name = "excite_nand",
-		.owner		= THIS_MODULE,
-	},
-	.probe = excite_nand_probe,
-	.remove = __devexit_p(excite_nand_remove)
-};
-
-static int __init excite_nand_init(void)
-{
-	pr_info("Basler eXcite nand flash driver Version "
-		EXCITE_NANDFLASH_VERSION "\n");
-	return platform_driver_register(&excite_nand_driver);
-}
-
-static void __exit excite_nand_exit(void)
-{
-	platform_driver_unregister(&excite_nand_driver);
-}
-
-module_init(excite_nand_init);
-module_exit(excite_nand_exit);
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a5be9ac..e58a653 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1953,6 +1953,8 @@ config BCM63XX_ENET
 
 source "drivers/net/fs_enet/Kconfig"
 
+source "drivers/net/octeon/Kconfig"
+
 endif # NET_ETHERNET
 
 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 246323d..ad1346d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -285,3 +285,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 obj-$(CONFIG_SFC) += sfc/
 
 obj-$(CONFIG_WIMAX) += wimax/
+
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
diff --git a/drivers/net/octeon/Kconfig b/drivers/net/octeon/Kconfig
new file mode 100644
index 0000000..1e56bbf
--- /dev/null
+++ b/drivers/net/octeon/Kconfig
@@ -0,0 +1,10 @@
+config OCTEON_MGMT_ETHERNET
+	tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
+	depends on  CPU_CAVIUM_OCTEON
+	select PHYLIB
+	select MDIO_OCTEON
+	default y
+	help
+	  This option enables the ethernet driver for the management
+	  port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX,
+	  CN54XX, CN52XX, and CN6XXX chips.
diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile
new file mode 100644
index 0000000..906edeca
--- /dev/null
+++ b/drivers/net/octeon/Makefile
@@ -0,0 +1,2 @@
+
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o
diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c
new file mode 100644
index 0000000..050538b
--- /dev/null
+++ b/drivers/net/octeon/octeon_mgmt.c
@@ -0,0 +1,1176 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#include <linux/capability.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+#include <linux/spinlock.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-mixx-defs.h>
+#include <asm/octeon/cvmx-agl-defs.h>
+
+#define DRV_NAME "octeon_mgmt"
+#define DRV_VERSION "2.0"
+#define DRV_DESCRIPTION \
+	"Cavium Networks Octeon MII (management) port Network Driver"
+
+#define OCTEON_MGMT_NAPI_WEIGHT 16
+
+/*
+ * Ring sizes that are powers of two allow for more efficient modulo
+ * opertions.
+ */
+#define OCTEON_MGMT_RX_RING_SIZE 512
+#define OCTEON_MGMT_TX_RING_SIZE 128
+
+/* Allow 8 bytes for vlan and FCS. */
+#define OCTEON_MGMT_RX_HEADROOM (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN)
+
+union mgmt_port_ring_entry {
+	u64 d64;
+	struct {
+		u64    reserved_62_63:2;
+		/* Length of the buffer/packet in bytes */
+		u64    len:14;
+		/* For TX, signals that the packet should be timestamped */
+		u64    tstamp:1;
+		/* The RX error code */
+		u64    code:7;
+#define RING_ENTRY_CODE_DONE 0xf
+#define RING_ENTRY_CODE_MORE 0x10
+		/* Physical address of the buffer */
+		u64    addr:40;
+	} s;
+};
+
+struct octeon_mgmt {
+	struct net_device *netdev;
+	int port;
+	int irq;
+	u64 *tx_ring;
+	dma_addr_t tx_ring_handle;
+	unsigned int tx_next;
+	unsigned int tx_next_clean;
+	unsigned int tx_current_fill;
+	/* The tx_list lock also protects the ring related variables */
+	struct sk_buff_head tx_list;
+
+	/* RX variables only touched in napi_poll.  No locking necessary. */
+	u64 *rx_ring;
+	dma_addr_t rx_ring_handle;
+	unsigned int rx_next;
+	unsigned int rx_next_fill;
+	unsigned int rx_current_fill;
+	struct sk_buff_head rx_list;
+
+	spinlock_t lock;
+	unsigned int last_duplex;
+	unsigned int last_link;
+	struct device *dev;
+	struct napi_struct napi;
+	struct tasklet_struct tx_clean_tasklet;
+	struct phy_device *phydev;
+};
+
+static void octeon_mgmt_set_rx_irq(struct octeon_mgmt *p, int enable)
+{
+	int port = p->port;
+	union cvmx_mixx_intena mix_intena;
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port));
+	mix_intena.s.ithena = enable ? 1 : 0;
+	cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static void octeon_mgmt_set_tx_irq(struct octeon_mgmt *p, int enable)
+{
+	int port = p->port;
+	union cvmx_mixx_intena mix_intena;
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port));
+	mix_intena.s.othena = enable ? 1 : 0;
+	cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static inline void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p)
+{
+	octeon_mgmt_set_rx_irq(p, 1);
+}
+
+static inline void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p)
+{
+	octeon_mgmt_set_rx_irq(p, 0);
+}
+
+static inline void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p)
+{
+	octeon_mgmt_set_tx_irq(p, 1);
+}
+
+static inline void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p)
+{
+	octeon_mgmt_set_tx_irq(p, 0);
+}
+
+static unsigned int ring_max_fill(unsigned int ring_size)
+{
+	return ring_size - 8;
+}
+
+static unsigned int ring_size_to_bytes(unsigned int ring_size)
+{
+	return ring_size * sizeof(union mgmt_port_ring_entry);
+}
+
+static void octeon_mgmt_rx_fill_ring(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+
+	while (p->rx_current_fill < ring_max_fill(OCTEON_MGMT_RX_RING_SIZE)) {
+		unsigned int size;
+		union mgmt_port_ring_entry re;
+		struct sk_buff *skb;
+
+		/* CN56XX pass 1 needs 8 bytes of padding.  */
+		size = netdev->mtu + OCTEON_MGMT_RX_HEADROOM + 8 + NET_IP_ALIGN;
+
+		skb = netdev_alloc_skb(netdev, size);
+		if (!skb)
+			break;
+		skb_reserve(skb, NET_IP_ALIGN);
+		__skb_queue_tail(&p->rx_list, skb);
+
+		re.d64 = 0;
+		re.s.len = size;
+		re.s.addr = dma_map_single(p->dev, skb->data,
+					   size,
+					   DMA_FROM_DEVICE);
+
+		/* Put it in the ring.  */
+		p->rx_ring[p->rx_next_fill] = re.d64;
+		dma_sync_single_for_device(p->dev, p->rx_ring_handle,
+					   ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+					   DMA_BIDIRECTIONAL);
+		p->rx_next_fill =
+			(p->rx_next_fill + 1) % OCTEON_MGMT_RX_RING_SIZE;
+		p->rx_current_fill++;
+		/* Ring the bell.  */
+		cvmx_write_csr(CVMX_MIXX_IRING2(port), 1);
+	}
+}
+
+static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p)
+{
+	int port = p->port;
+	union cvmx_mixx_orcnt mix_orcnt;
+	union mgmt_port_ring_entry re;
+	struct sk_buff *skb;
+	int cleaned = 0;
+	unsigned long flags;
+
+	mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port));
+	while (mix_orcnt.s.orcnt) {
+		dma_sync_single_for_cpu(p->dev, p->tx_ring_handle,
+					ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+					DMA_BIDIRECTIONAL);
+
+		spin_lock_irqsave(&p->tx_list.lock, flags);
+
+		re.d64 = p->tx_ring[p->tx_next_clean];
+		p->tx_next_clean =
+			(p->tx_next_clean + 1) % OCTEON_MGMT_TX_RING_SIZE;
+		skb = __skb_dequeue(&p->tx_list);
+
+		mix_orcnt.u64 = 0;
+		mix_orcnt.s.orcnt = 1;
+
+		/* Acknowledge to hardware that we have the buffer.  */
+		cvmx_write_csr(CVMX_MIXX_ORCNT(port), mix_orcnt.u64);
+		p->tx_current_fill--;
+
+		spin_unlock_irqrestore(&p->tx_list.lock, flags);
+
+		dma_unmap_single(p->dev, re.s.addr, re.s.len,
+				 DMA_TO_DEVICE);
+		dev_kfree_skb_any(skb);
+		cleaned++;
+
+		mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port));
+	}
+
+	if (cleaned && netif_queue_stopped(p->netdev))
+		netif_wake_queue(p->netdev);
+}
+
+static void octeon_mgmt_clean_tx_tasklet(unsigned long arg)
+{
+	struct octeon_mgmt *p = (struct octeon_mgmt *)arg;
+	octeon_mgmt_clean_tx_buffers(p);
+	octeon_mgmt_enable_tx_irq(p);
+}
+
+static void octeon_mgmt_update_rx_stats(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	unsigned long flags;
+	u64 drop, bad;
+
+	/* These reads also clear the count registers.  */
+	drop = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port));
+	bad = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port));
+
+	if (drop || bad) {
+		/* Do an atomic update. */
+		spin_lock_irqsave(&p->lock, flags);
+		netdev->stats.rx_errors += bad;
+		netdev->stats.rx_dropped += drop;
+		spin_unlock_irqrestore(&p->lock, flags);
+	}
+}
+
+static void octeon_mgmt_update_tx_stats(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	unsigned long flags;
+
+	union cvmx_agl_gmx_txx_stat0 s0;
+	union cvmx_agl_gmx_txx_stat1 s1;
+
+	/* These reads also clear the count registers.  */
+	s0.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT0(port));
+	s1.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT1(port));
+
+	if (s0.s.xsdef || s0.s.xscol || s1.s.scol || s1.s.mcol) {
+		/* Do an atomic update. */
+		spin_lock_irqsave(&p->lock, flags);
+		netdev->stats.tx_errors += s0.s.xsdef + s0.s.xscol;
+		netdev->stats.collisions += s1.s.scol + s1.s.mcol;
+		spin_unlock_irqrestore(&p->lock, flags);
+	}
+}
+
+/*
+ * Dequeue a receive skb and its corresponding ring entry.  The ring
+ * entry is returned, *pskb is updated to point to the skb.
+ */
+static u64 octeon_mgmt_dequeue_rx_buffer(struct octeon_mgmt *p,
+					 struct sk_buff **pskb)
+{
+	union mgmt_port_ring_entry re;
+
+	dma_sync_single_for_cpu(p->dev, p->rx_ring_handle,
+				ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+				DMA_BIDIRECTIONAL);
+
+	re.d64 = p->rx_ring[p->rx_next];
+	p->rx_next = (p->rx_next + 1) % OCTEON_MGMT_RX_RING_SIZE;
+	p->rx_current_fill--;
+	*pskb = __skb_dequeue(&p->rx_list);
+
+	dma_unmap_single(p->dev, re.s.addr,
+			 ETH_FRAME_LEN + OCTEON_MGMT_RX_HEADROOM,
+			 DMA_FROM_DEVICE);
+
+	return re.d64;
+}
+
+
+static int octeon_mgmt_receive_one(struct octeon_mgmt *p)
+{
+	int port = p->port;
+	struct net_device *netdev = p->netdev;
+	union cvmx_mixx_ircnt mix_ircnt;
+	union mgmt_port_ring_entry re;
+	struct sk_buff *skb;
+	struct sk_buff *skb2;
+	struct sk_buff *skb_new;
+	union mgmt_port_ring_entry re2;
+	int rc = 1;
+
+
+	re.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb);
+	if (likely(re.s.code == RING_ENTRY_CODE_DONE)) {
+		/* A good packet, send it up. */
+		skb_put(skb, re.s.len);
+good:
+		skb->protocol = eth_type_trans(skb, netdev);
+		netdev->stats.rx_packets++;
+		netdev->stats.rx_bytes += skb->len;
+		netdev->last_rx = jiffies;
+		netif_receive_skb(skb);
+		rc = 0;
+	} else if (re.s.code == RING_ENTRY_CODE_MORE) {
+		/*
+		 * Packet split across skbs.  This can happen if we
+		 * increase the MTU.  Buffers that are already in the
+		 * rx ring can then end up being too small.  As the rx
+		 * ring is refilled, buffers sized for the new MTU
+		 * will be used and we should go back to the normal
+		 * non-split case.
+		 */
+		skb_put(skb, re.s.len);
+		do {
+			re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2);
+			if (re2.s.code != RING_ENTRY_CODE_MORE
+				&& re2.s.code != RING_ENTRY_CODE_DONE)
+				goto split_error;
+			skb_put(skb2,  re2.s.len);
+			skb_new = skb_copy_expand(skb, 0, skb2->len,
+						  GFP_ATOMIC);
+			if (!skb_new)
+				goto split_error;
+			if (skb_copy_bits(skb2, 0, skb_tail_pointer(skb_new),
+					  skb2->len))
+				goto split_error;
+			skb_put(skb_new, skb2->len);
+			dev_kfree_skb_any(skb);
+			dev_kfree_skb_any(skb2);
+			skb = skb_new;
+		} while (re2.s.code == RING_ENTRY_CODE_MORE);
+		goto good;
+	} else {
+		/* Some other error, discard it. */
+		dev_kfree_skb_any(skb);
+		/*
+		 * Error statistics are accumulated in
+		 * octeon_mgmt_update_rx_stats.
+		 */
+	}
+	goto done;
+split_error:
+	/* Discard the whole mess. */
+	dev_kfree_skb_any(skb);
+	dev_kfree_skb_any(skb2);
+	while (re2.s.code == RING_ENTRY_CODE_MORE) {
+		re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2);
+		dev_kfree_skb_any(skb2);
+	}
+	netdev->stats.rx_errors++;
+
+done:
+	/* Tell the hardware we processed a packet.  */
+	mix_ircnt.u64 = 0;
+	mix_ircnt.s.ircnt = 1;
+	cvmx_write_csr(CVMX_MIXX_IRCNT(port), mix_ircnt.u64);
+	return rc;
+
+}
+
+static int octeon_mgmt_receive_packets(struct octeon_mgmt *p, int budget)
+{
+	int port = p->port;
+	unsigned int work_done = 0;
+	union cvmx_mixx_ircnt mix_ircnt;
+	int rc;
+
+
+	mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port));
+	while (work_done < budget && mix_ircnt.s.ircnt) {
+
+		rc = octeon_mgmt_receive_one(p);
+		if (!rc)
+			work_done++;
+
+		/* Check for more packets. */
+		mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port));
+	}
+
+	octeon_mgmt_rx_fill_ring(p->netdev);
+
+	return work_done;
+}
+
+static int octeon_mgmt_napi_poll(struct napi_struct *napi, int budget)
+{
+	struct octeon_mgmt *p = container_of(napi, struct octeon_mgmt, napi);
+	struct net_device *netdev = p->netdev;
+	unsigned int work_done = 0;
+
+	work_done = octeon_mgmt_receive_packets(p, budget);
+
+	if (work_done < budget) {
+		/* We stopped because no more packets were available. */
+		napi_complete(napi);
+		octeon_mgmt_enable_rx_irq(p);
+	}
+	octeon_mgmt_update_rx_stats(netdev);
+
+	return work_done;
+}
+
+/* Reset the hardware to clean state.  */
+static void octeon_mgmt_reset_hw(struct octeon_mgmt *p)
+{
+	union cvmx_mixx_ctl mix_ctl;
+	union cvmx_mixx_bist mix_bist;
+	union cvmx_agl_gmx_bist agl_gmx_bist;
+
+	mix_ctl.u64 = 0;
+	cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64);
+	do {
+		mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(p->port));
+	} while (mix_ctl.s.busy);
+	mix_ctl.s.reset = 1;
+	cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64);
+	cvmx_read_csr(CVMX_MIXX_CTL(p->port));
+	cvmx_wait(64);
+
+	mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(p->port));
+	if (mix_bist.u64)
+		dev_warn(p->dev, "MIX failed BIST (0x%016llx)\n",
+			(unsigned long long)mix_bist.u64);
+
+	agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST);
+	if (agl_gmx_bist.u64)
+		dev_warn(p->dev, "AGL failed BIST (0x%016llx)\n",
+			 (unsigned long long)agl_gmx_bist.u64);
+}
+
+struct octeon_mgmt_cam_state {
+	u64 cam[6];
+	u64 cam_mask;
+	int cam_index;
+};
+
+static void octeon_mgmt_cam_state_add(struct octeon_mgmt_cam_state *cs,
+				      unsigned char *addr)
+{
+	int i;
+
+	for (i = 0; i < 6; i++)
+		cs->cam[i] |= (u64)addr[i] << (8 * (cs->cam_index));
+	cs->cam_mask |= (1ULL << cs->cam_index);
+	cs->cam_index++;
+}
+
+static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	int i;
+	union cvmx_agl_gmx_rxx_adr_ctl adr_ctl;
+	union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
+	unsigned long flags;
+	unsigned int prev_packet_enable;
+	unsigned int cam_mode = 1; /* 1 - Accept on CAM match */
+	unsigned int multicast_mode = 1; /* 1 - Reject all multicast.  */
+	struct octeon_mgmt_cam_state cam_state;
+	struct dev_addr_list *list;
+	struct list_head *pos;
+	int available_cam_entries;
+
+	memset(&cam_state, 0, sizeof(cam_state));
+
+	if ((netdev->flags & IFF_PROMISC) || netdev->dev_addrs.count > 7) {
+		cam_mode = 0;
+		available_cam_entries = 8;
+	} else {
+		/*
+		 * One CAM entry for the primary address, leaves seven
+		 * for the secondary addresses.
+		 */
+		available_cam_entries = 7 - netdev->dev_addrs.count;
+	}
+
+	if (netdev->flags & IFF_MULTICAST) {
+		if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI)
+		    || netdev->mc_count  > available_cam_entries)
+			multicast_mode = 2; /* 1 - Accept all multicast.  */
+		else
+			multicast_mode = 0; /* 0 - Use CAM.  */
+	}
+
+	if (cam_mode == 1) {
+		/* Add primary address. */
+		octeon_mgmt_cam_state_add(&cam_state, netdev->dev_addr);
+		list_for_each(pos, &netdev->dev_addrs.list) {
+			struct netdev_hw_addr *hw_addr;
+			hw_addr = list_entry(pos, struct netdev_hw_addr, list);
+			octeon_mgmt_cam_state_add(&cam_state, hw_addr->addr);
+			list = list->next;
+		}
+	}
+	if (multicast_mode == 0) {
+		i = netdev->mc_count;
+		list = netdev->mc_list;
+		while (i--) {
+			octeon_mgmt_cam_state_add(&cam_state, list->da_addr);
+			list = list->next;
+		}
+	}
+
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	/* Disable packet I/O. */
+	agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+	prev_packet_enable = agl_gmx_prtx.s.en;
+	agl_gmx_prtx.s.en = 0;
+	cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+
+	adr_ctl.u64 = 0;
+	adr_ctl.s.cam_mode = cam_mode;
+	adr_ctl.s.mcst = multicast_mode;
+	adr_ctl.s.bcst = 1;     /* Allow broadcast */
+
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), adr_ctl.u64);
+
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), cam_state.cam[0]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), cam_state.cam[1]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), cam_state.cam[2]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), cam_state.cam[3]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), cam_state.cam[4]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), cam_state.cam[5]);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), cam_state.cam_mask);
+
+	/* Restore packet I/O. */
+	agl_gmx_prtx.s.en = prev_packet_enable;
+	cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr)
+{
+	struct sockaddr *sa = addr;
+
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN);
+
+	octeon_mgmt_set_rx_filtering(netdev);
+
+	return 0;
+}
+
+static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM;
+
+	/*
+	 * Limit the MTU to make sure the ethernet packets are between
+	 * 64 bytes and 16383 bytes.
+	 */
+	if (size_without_fcs < 64 || size_without_fcs > 16383) {
+		dev_warn(p->dev, "MTU must be between %d and %d.\n",
+			 64 - OCTEON_MGMT_RX_HEADROOM,
+			 16383 - OCTEON_MGMT_RX_HEADROOM);
+		return -EINVAL;
+	}
+
+	netdev->mtu = new_mtu;
+
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port),
+		       (size_without_fcs + 7) & 0xfff8);
+
+	return 0;
+}
+
+static irqreturn_t octeon_mgmt_interrupt(int cpl, void *dev_id)
+{
+	struct net_device *netdev = dev_id;
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	union cvmx_mixx_isr mixx_isr;
+
+	mixx_isr.u64 = cvmx_read_csr(CVMX_MIXX_ISR(port));
+
+	/* Clear any pending interrupts */
+	cvmx_write_csr(CVMX_MIXX_ISR(port),
+		       cvmx_read_csr(CVMX_MIXX_ISR(port)));
+	cvmx_read_csr(CVMX_MIXX_ISR(port));
+
+	if (mixx_isr.s.irthresh) {
+		octeon_mgmt_disable_rx_irq(p);
+		napi_schedule(&p->napi);
+	}
+	if (mixx_isr.s.orthresh) {
+		octeon_mgmt_disable_tx_irq(p);
+		tasklet_schedule(&p->tx_clean_tasklet);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int octeon_mgmt_ioctl(struct net_device *netdev,
+			     struct ifreq *rq, int cmd)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	if (!p->phydev)
+		return -EINVAL;
+
+	return phy_mii_ioctl(p->phydev, if_mii(rq), cmd);
+}
+
+static void octeon_mgmt_adjust_link(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	union cvmx_agl_gmx_prtx_cfg prtx_cfg;
+	unsigned long flags;
+	int link_changed = 0;
+
+	spin_lock_irqsave(&p->lock, flags);
+	if (p->phydev->link) {
+		if (!p->last_link)
+			link_changed = 1;
+		if (p->last_duplex != p->phydev->duplex) {
+			p->last_duplex = p->phydev->duplex;
+			prtx_cfg.u64 =
+				cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+			prtx_cfg.s.duplex = p->phydev->duplex;
+			cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port),
+				       prtx_cfg.u64);
+		}
+	} else {
+		if (p->last_link)
+			link_changed = -1;
+	}
+	p->last_link = p->phydev->link;
+	spin_unlock_irqrestore(&p->lock, flags);
+
+	if (link_changed != 0) {
+		if (link_changed > 0) {
+			netif_carrier_on(netdev);
+			pr_info("%s: Link is up - %d/%s\n", netdev->name,
+				p->phydev->speed,
+				DUPLEX_FULL == p->phydev->duplex ?
+				"Full" : "Half");
+		} else {
+			netif_carrier_off(netdev);
+			pr_info("%s: Link is down\n", netdev->name);
+		}
+	}
+}
+
+static int octeon_mgmt_init_phy(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	char phy_id[20];
+
+	if (octeon_is_simulation()) {
+		/* No PHYs in the simulator. */
+		netif_carrier_on(netdev);
+		return 0;
+	}
+
+	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port);
+
+	p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0,
+				PHY_INTERFACE_MODE_MII);
+
+	if (IS_ERR(p->phydev)) {
+		p->phydev = NULL;
+		return -1;
+	}
+
+	phy_start_aneg(p->phydev);
+
+	return 0;
+}
+
+static int octeon_mgmt_open(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	union cvmx_mixx_ctl mix_ctl;
+	union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode;
+	union cvmx_mixx_oring1 oring1;
+	union cvmx_mixx_iring1 iring1;
+	union cvmx_agl_gmx_prtx_cfg prtx_cfg;
+	union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl;
+	union cvmx_mixx_irhwm mix_irhwm;
+	union cvmx_mixx_orhwm mix_orhwm;
+	union cvmx_mixx_intena mix_intena;
+	struct sockaddr sa;
+
+	/* Allocate ring buffers.  */
+	p->tx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+			     GFP_KERNEL);
+	if (!p->tx_ring)
+		return -ENOMEM;
+	p->tx_ring_handle =
+		dma_map_single(p->dev, p->tx_ring,
+			       ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+			       DMA_BIDIRECTIONAL);
+	p->tx_next = 0;
+	p->tx_next_clean = 0;
+	p->tx_current_fill = 0;
+
+
+	p->rx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+			     GFP_KERNEL);
+	if (!p->rx_ring)
+		goto err_nomem;
+	p->rx_ring_handle =
+		dma_map_single(p->dev, p->rx_ring,
+			       ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+			       DMA_BIDIRECTIONAL);
+
+	p->rx_next = 0;
+	p->rx_next_fill = 0;
+	p->rx_current_fill = 0;
+
+	octeon_mgmt_reset_hw(p);
+
+	mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
+
+	/* Bring it out of reset if needed. */
+	if (mix_ctl.s.reset) {
+		mix_ctl.s.reset = 0;
+		cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+		do {
+			mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
+		} while (mix_ctl.s.reset);
+	}
+
+	agl_gmx_inf_mode.u64 = 0;
+	agl_gmx_inf_mode.s.en = 1;
+	cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64);
+
+	oring1.u64 = 0;
+	oring1.s.obase = p->tx_ring_handle >> 3;
+	oring1.s.osize = OCTEON_MGMT_TX_RING_SIZE;
+	cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64);
+
+	iring1.u64 = 0;
+	iring1.s.ibase = p->rx_ring_handle >> 3;
+	iring1.s.isize = OCTEON_MGMT_RX_RING_SIZE;
+	cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64);
+
+	/* Disable packet I/O. */
+	prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+	prtx_cfg.s.en = 0;
+	cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64);
+
+	memcpy(sa.sa_data, netdev->dev_addr, ETH_ALEN);
+	octeon_mgmt_set_mac_address(netdev, &sa);
+
+	octeon_mgmt_change_mtu(netdev, netdev->mtu);
+
+	/*
+	 * Enable the port HW. Packets are not allowed until
+	 * cvmx_mgmt_port_enable() is called.
+	 */
+	mix_ctl.u64 = 0;
+	mix_ctl.s.crc_strip = 1;    /* Strip the ending CRC */
+	mix_ctl.s.en = 1;           /* Enable the port */
+	mix_ctl.s.nbtarb = 0;       /* Arbitration mode */
+	/* MII CB-request FIFO programmable high watermark */
+	mix_ctl.s.mrq_hwm = 1;
+	cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
+	    || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		/*
+		 * Force compensation values, as they are not
+		 * determined properly by HW
+		 */
+		union cvmx_agl_gmx_drv_ctl drv_ctl;
+
+		drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL);
+		if (port) {
+			drv_ctl.s.byp_en1 = 1;
+			drv_ctl.s.nctl1 = 6;
+			drv_ctl.s.pctl1 = 6;
+		} else {
+			drv_ctl.s.byp_en = 1;
+			drv_ctl.s.nctl = 6;
+			drv_ctl.s.pctl = 6;
+		}
+		cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64);
+	}
+
+	octeon_mgmt_rx_fill_ring(netdev);
+
+	/* Clear statistics. */
+	/* Clear on read. */
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_CTL(port), 1);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port), 0);
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port), 0);
+
+	cvmx_write_csr(CVMX_AGL_GMX_TXX_STATS_CTL(port), 1);
+	cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT0(port), 0);
+	cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT1(port), 0);
+
+	/* Clear any pending interrupts */
+	cvmx_write_csr(CVMX_MIXX_ISR(port), cvmx_read_csr(CVMX_MIXX_ISR(port)));
+
+	if (request_irq(p->irq, octeon_mgmt_interrupt, 0, netdev->name,
+			netdev)) {
+		dev_err(p->dev, "request_irq(%d) failed.\n", p->irq);
+		goto err_noirq;
+	}
+
+	/* Interrupt every single RX packet */
+	mix_irhwm.u64 = 0;
+	mix_irhwm.s.irhwm = 0;
+	cvmx_write_csr(CVMX_MIXX_IRHWM(port), mix_irhwm.u64);
+
+	/* Interrupt when we have 5 or more packets to clean.  */
+	mix_orhwm.u64 = 0;
+	mix_orhwm.s.orhwm = 5;
+	cvmx_write_csr(CVMX_MIXX_ORHWM(port), mix_orhwm.u64);
+
+	/* Enable receive and transmit interrupts */
+	mix_intena.u64 = 0;
+	mix_intena.s.ithena = 1;
+	mix_intena.s.othena = 1;
+	cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64);
+
+
+	/* Enable packet I/O. */
+
+	rxx_frm_ctl.u64 = 0;
+	rxx_frm_ctl.s.pre_align = 1;
+	/*
+	 * When set, disables the length check for non-min sized pkts
+	 * with padding in the client data.
+	 */
+	rxx_frm_ctl.s.pad_len = 1;
+	/* When set, disables the length check for VLAN pkts */
+	rxx_frm_ctl.s.vlan_len = 1;
+	/* When set, PREAMBLE checking is  less strict */
+	rxx_frm_ctl.s.pre_free = 1;
+	/* Control Pause Frames can match station SMAC */
+	rxx_frm_ctl.s.ctl_smac = 0;
+	/* Control Pause Frames can match globally assign Multicast address */
+	rxx_frm_ctl.s.ctl_mcst = 1;
+	/* Forward pause information to TX block */
+	rxx_frm_ctl.s.ctl_bck = 1;
+	/* Drop Control Pause Frames */
+	rxx_frm_ctl.s.ctl_drp = 1;
+	/* Strip off the preamble */
+	rxx_frm_ctl.s.pre_strp = 1;
+	/*
+	 * This port is configured to send PREAMBLE+SFD to begin every
+	 * frame.  GMX checks that the PREAMBLE is sent correctly.
+	 */
+	rxx_frm_ctl.s.pre_chk = 1;
+	cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64);
+
+	/* Enable the AGL block */
+	agl_gmx_inf_mode.u64 = 0;
+	agl_gmx_inf_mode.s.en = 1;
+	cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64);
+
+	/* Configure the port duplex and enables */
+	prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+	prtx_cfg.s.tx_en = 1;
+	prtx_cfg.s.rx_en = 1;
+	prtx_cfg.s.en = 1;
+	p->last_duplex = 1;
+	prtx_cfg.s.duplex = p->last_duplex;
+	cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64);
+
+	p->last_link = 0;
+	netif_carrier_off(netdev);
+
+	if (octeon_mgmt_init_phy(netdev)) {
+		dev_err(p->dev, "Cannot initialize PHY.\n");
+		goto err_noirq;
+	}
+
+	netif_wake_queue(netdev);
+	napi_enable(&p->napi);
+
+	return 0;
+err_noirq:
+	octeon_mgmt_reset_hw(p);
+	dma_unmap_single(p->dev, p->rx_ring_handle,
+			 ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+			 DMA_BIDIRECTIONAL);
+	kfree(p->rx_ring);
+err_nomem:
+	dma_unmap_single(p->dev, p->tx_ring_handle,
+			 ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+			 DMA_BIDIRECTIONAL);
+	kfree(p->tx_ring);
+	return -ENOMEM;
+}
+
+static int octeon_mgmt_stop(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+
+	napi_disable(&p->napi);
+	netif_stop_queue(netdev);
+
+	if (p->phydev)
+		phy_disconnect(p->phydev);
+
+	netif_carrier_off(netdev);
+
+	octeon_mgmt_reset_hw(p);
+
+
+	free_irq(p->irq, netdev);
+
+	/* dma_unmap is a nop on Octeon, so just free everything.  */
+	skb_queue_purge(&p->tx_list);
+	skb_queue_purge(&p->rx_list);
+
+	dma_unmap_single(p->dev, p->rx_ring_handle,
+			 ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
+			 DMA_BIDIRECTIONAL);
+	kfree(p->rx_ring);
+
+	dma_unmap_single(p->dev, p->tx_ring_handle,
+			 ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+			 DMA_BIDIRECTIONAL);
+	kfree(p->tx_ring);
+
+
+	return 0;
+}
+
+static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+	int port = p->port;
+	union mgmt_port_ring_entry re;
+	unsigned long flags;
+
+	re.d64 = 0;
+	re.s.len = skb->len;
+	re.s.addr = dma_map_single(p->dev, skb->data,
+				   skb->len,
+				   DMA_TO_DEVICE);
+
+	spin_lock_irqsave(&p->tx_list.lock, flags);
+
+	if (unlikely(p->tx_current_fill >=
+		     ring_max_fill(OCTEON_MGMT_TX_RING_SIZE))) {
+		spin_unlock_irqrestore(&p->tx_list.lock, flags);
+
+		dma_unmap_single(p->dev, re.s.addr, re.s.len,
+				 DMA_TO_DEVICE);
+
+		netif_stop_queue(netdev);
+		return NETDEV_TX_BUSY;
+	}
+
+	__skb_queue_tail(&p->tx_list, skb);
+
+	/* Put it in the ring.  */
+	p->tx_ring[p->tx_next] = re.d64;
+	p->tx_next = (p->tx_next + 1) % OCTEON_MGMT_TX_RING_SIZE;
+	p->tx_current_fill++;
+
+	spin_unlock_irqrestore(&p->tx_list.lock, flags);
+
+	dma_sync_single_for_device(p->dev, p->tx_ring_handle,
+				   ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE),
+				   DMA_BIDIRECTIONAL);
+
+	netdev->stats.tx_packets++;
+	netdev->stats.tx_bytes += skb->len;
+
+	/* Ring the bell.  */
+	cvmx_write_csr(CVMX_MIXX_ORING2(port), 1);
+
+	netdev->trans_start = jiffies;
+	octeon_mgmt_clean_tx_buffers(p);
+	octeon_mgmt_update_tx_stats(netdev);
+	return NETDEV_TX_OK;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void octeon_mgmt_poll_controller(struct net_device *netdev)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+
+	octeon_mgmt_receive_packets(p, 16);
+	octeon_mgmt_update_rx_stats(netdev);
+	return;
+}
+#endif
+
+static void octeon_mgmt_get_drvinfo(struct net_device *netdev,
+				    struct ethtool_drvinfo *info)
+{
+	strncpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strncpy(info->version, DRV_VERSION, sizeof(info->version));
+	strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
+	strncpy(info->bus_info, "N/A", sizeof(info->bus_info));
+	info->n_stats = 0;
+	info->testinfo_len = 0;
+	info->regdump_len = 0;
+	info->eedump_len = 0;
+}
+
+static int octeon_mgmt_get_settings(struct net_device *netdev,
+				    struct ethtool_cmd *cmd)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+
+	if (p->phydev)
+		return phy_ethtool_gset(p->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static int octeon_mgmt_set_settings(struct net_device *netdev,
+				    struct ethtool_cmd *cmd)
+{
+	struct octeon_mgmt *p = netdev_priv(netdev);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (p->phydev)
+		return phy_ethtool_sset(p->phydev, cmd);
+
+	return -EINVAL;
+}
+
+static const struct ethtool_ops octeon_mgmt_ethtool_ops = {
+	.get_drvinfo = octeon_mgmt_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_settings = octeon_mgmt_get_settings,
+	.set_settings = octeon_mgmt_set_settings
+};
+
+static const struct net_device_ops octeon_mgmt_ops = {
+	.ndo_open =			octeon_mgmt_open,
+	.ndo_stop =			octeon_mgmt_stop,
+	.ndo_start_xmit =		octeon_mgmt_xmit,
+	.ndo_set_rx_mode = 		octeon_mgmt_set_rx_filtering,
+	.ndo_set_multicast_list =	octeon_mgmt_set_rx_filtering,
+	.ndo_set_mac_address =		octeon_mgmt_set_mac_address,
+	.ndo_do_ioctl = 		octeon_mgmt_ioctl,
+	.ndo_change_mtu =		octeon_mgmt_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller =		octeon_mgmt_poll_controller,
+#endif
+};
+
+static int __init octeon_mgmt_probe(struct platform_device *pdev)
+{
+	struct resource *res_irq;
+	struct net_device *netdev;
+	struct octeon_mgmt *p;
+	int i;
+
+	netdev = alloc_etherdev(sizeof(struct octeon_mgmt));
+	if (netdev == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, netdev);
+	p = netdev_priv(netdev);
+	netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll,
+		       OCTEON_MGMT_NAPI_WEIGHT);
+
+	p->netdev = netdev;
+	p->dev = &pdev->dev;
+
+	p->port = pdev->id;
+	snprintf(netdev->name, IFNAMSIZ, "mgmt%d", p->port);
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq)
+		goto err;
+
+	p->irq = res_irq->start;
+	spin_lock_init(&p->lock);
+
+	skb_queue_head_init(&p->tx_list);
+	skb_queue_head_init(&p->rx_list);
+	tasklet_init(&p->tx_clean_tasklet,
+		     octeon_mgmt_clean_tx_tasklet, (unsigned long)p);
+
+	netdev->netdev_ops = &octeon_mgmt_ops;
+	netdev->ethtool_ops = &octeon_mgmt_ethtool_ops;
+
+
+	/* The mgmt ports get the first N MACs.  */
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = octeon_bootinfo->mac_addr_base[i];
+	netdev->dev_addr[5] += p->port;
+
+	if (p->port >= octeon_bootinfo->mac_addr_count)
+		dev_err(&pdev->dev,
+			"Error %s: Using MAC outside of the assigned range: "
+			"%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->name,
+			netdev->dev_addr[0], netdev->dev_addr[1],
+			netdev->dev_addr[2], netdev->dev_addr[3],
+			netdev->dev_addr[4], netdev->dev_addr[5]);
+
+	if (register_netdev(netdev))
+		goto err;
+
+	dev_info(&pdev->dev, "Version " DRV_VERSION "\n");
+	return 0;
+err:
+	free_netdev(netdev);
+	return -ENOENT;
+}
+
+static int __exit octeon_mgmt_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = dev_get_drvdata(&pdev->dev);
+
+	unregister_netdev(netdev);
+	free_netdev(netdev);
+	return 0;
+}
+
+static struct platform_driver octeon_mgmt_driver = {
+	.driver = {
+		.name		= "octeon_mgmt",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= octeon_mgmt_probe,
+	.remove		= __exit_p(octeon_mgmt_remove),
+};
+
+extern void octeon_mdiobus_force_mod_depencency(void);
+
+static int __init octeon_mgmt_mod_init(void)
+{
+	/* Force our mdiobus driver module to be loaded first. */
+	octeon_mdiobus_force_mod_depencency();
+	return platform_driver_register(&octeon_mgmt_driver);
+}
+
+static void __exit octeon_mgmt_mod_exit(void)
+{
+	platform_driver_unregister(&octeon_mgmt_driver);
+}
+
+module_init(octeon_mgmt_mod_init);
+module_exit(octeon_mgmt_mod_exit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d5d8e1c..fc5938ba 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -115,4 +115,15 @@ config MDIO_GPIO
 	  To compile this driver as a module, choose M here: the module
 	  will be called mdio-gpio.
 
+config MDIO_OCTEON
+	tristate "Support for MDIO buses on Octeon SOCs"
+	depends on  CPU_CAVIUM_OCTEON
+	default y
+	help
+
+	  This module provides a driver for the Octeon MDIO busses.
+	  It is required by the Octeon Ethernet device drivers.
+
+	  If in doubt, say Y.
+
 endif # PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index edfaac4..1342585 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
new file mode 100644
index 0000000..61a4461
--- /dev/null
+++ b/drivers/net/phy/mdio-octeon.c
@@ -0,0 +1,180 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-smix-defs.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver"
+
+struct octeon_mdiobus {
+	struct mii_bus *mii_bus;
+	int unit;
+	int phy_irq[PHY_MAX_ADDR];
+};
+
+static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct octeon_mdiobus *p = bus->priv;
+	union cvmx_smix_cmd smi_cmd;
+	union cvmx_smix_rd_dat smi_rd;
+	int timeout = 1000;
+
+	smi_cmd.u64 = 0;
+	smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */
+	smi_cmd.s.phy_adr = phy_id;
+	smi_cmd.s.reg_adr = regnum;
+	cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+
+	do {
+		/*
+		 * Wait 1000 clocks so we don't saturate the RSL bus
+		 * doing reads.
+		 */
+		cvmx_wait(1000);
+		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit));
+	} while (smi_rd.s.pending && --timeout);
+
+	if (smi_rd.s.val)
+		return smi_rd.s.dat;
+	else
+		return -EIO;
+}
+
+static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
+				int regnum, u16 val)
+{
+	struct octeon_mdiobus *p = bus->priv;
+	union cvmx_smix_cmd smi_cmd;
+	union cvmx_smix_wr_dat smi_wr;
+	int timeout = 1000;
+
+	smi_wr.u64 = 0;
+	smi_wr.s.dat = val;
+	cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64);
+
+	smi_cmd.u64 = 0;
+	smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */
+	smi_cmd.s.phy_adr = phy_id;
+	smi_cmd.s.reg_adr = regnum;
+	cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+
+	do {
+		/*
+		 * Wait 1000 clocks so we don't saturate the RSL bus
+		 * doing reads.
+		 */
+		cvmx_wait(1000);
+		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit));
+	} while (smi_wr.s.pending && --timeout);
+
+	if (timeout <= 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int __init octeon_mdiobus_probe(struct platform_device *pdev)
+{
+	struct octeon_mdiobus *bus;
+	int i;
+	int err = -ENOENT;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	/* The platform_device id is our unit number.  */
+	bus->unit = pdev->id;
+
+	bus->mii_bus = mdiobus_alloc();
+
+	if (!bus->mii_bus)
+		goto err;
+
+	/*
+	 * Standard Octeon evaluation boards don't support phy
+	 * interrupts, we need to poll.
+	 */
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		bus->phy_irq[i] = PHY_POLL;
+
+	bus->mii_bus->priv = bus;
+	bus->mii_bus->irq = bus->phy_irq;
+	bus->mii_bus->name = "mdio-octeon";
+	snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%x", bus->unit);
+	bus->mii_bus->parent = &pdev->dev;
+
+	bus->mii_bus->read = octeon_mdiobus_read;
+	bus->mii_bus->write = octeon_mdiobus_write;
+
+	dev_set_drvdata(&pdev->dev, bus);
+
+	err = mdiobus_register(bus->mii_bus);
+	if (err)
+		goto err_register;
+
+	dev_info(&pdev->dev, "Version " DRV_VERSION "\n");
+
+	return 0;
+err_register:
+	mdiobus_free(bus->mii_bus);
+
+err:
+	devm_kfree(&pdev->dev, bus);
+	return err;
+}
+
+static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
+{
+	struct octeon_mdiobus *bus;
+
+	bus = dev_get_drvdata(&pdev->dev);
+
+	mdiobus_unregister(bus->mii_bus);
+	mdiobus_free(bus->mii_bus);
+	return 0;
+}
+
+static struct platform_driver octeon_mdiobus_driver = {
+	.driver = {
+		.name		= "mdio-octeon",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= octeon_mdiobus_probe,
+	.remove		= __exit_p(octeon_mdiobus_remove),
+};
+
+void octeon_mdiobus_force_mod_depencency(void)
+{
+	/* Let ethernet drivers force us to be loaded.  */
+}
+EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency);
+
+static int __init octeon_mdiobus_mod_init(void)
+{
+	return platform_driver_register(&octeon_mdiobus_driver);
+}
+
+static void __exit octeon_mdiobus_mod_exit(void)
+{
+	platform_driver_unregister(&octeon_mdiobus_driver);
+}
+
+module_init(octeon_mdiobus_mod_init);
+module_exit(octeon_mdiobus_mod_exit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index eb154dc..c8c1232 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -686,7 +686,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	 */
 #if	defined(CONFIG_ATARI)
 	address_space = 64;
-#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) || defined(__sparc__)
+#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
+			|| defined(__sparc__) || defined(__mips__)
 	address_space = 128;
 #else
 #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig
index 536e238..638ad6b 100644
--- a/drivers/staging/octeon/Kconfig
+++ b/drivers/staging/octeon/Kconfig
@@ -1,7 +1,8 @@
 config OCTEON_ETHERNET
 	tristate "Cavium Networks Octeon Ethernet support"
 	depends on CPU_CAVIUM_OCTEON
-	select MII
+	select PHYLIB
+	select MDIO_OCTEON
 	help
 	  This driver supports the builtin ethernet ports on Cavium
 	  Networks' products in the Octeon family. This driver supports the
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 31a58e5..05a5cc0 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -26,7 +26,8 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
+
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -34,86 +35,12 @@
 #include "ethernet-defines.h"
 #include "octeon-ethernet.h"
 #include "ethernet-mdio.h"
+#include "ethernet-util.h"
 
 #include "cvmx-helper-board.h"
 
 #include "cvmx-smix-defs.h"
 
-DECLARE_MUTEX(mdio_sem);
-
-/**
- * Perform an MII read. Called by the generic MII routines
- *
- * @dev:      Device to perform read for
- * @phy_id:   The MII phy id
- * @location: Register location to read
- * Returns Result from the read or zero on failure
- */
-static int cvm_oct_mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_rd_dat smi_rd;
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 1;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64);
-
-	do {
-		if (!in_interrupt())
-			yield();
-		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(0));
-	} while (smi_rd.s.pending);
-
-	if (smi_rd.s.val)
-		return smi_rd.s.dat;
-	else
-		return 0;
-}
-
-static int cvm_oct_mdio_dummy_read(struct net_device *dev, int phy_id,
-				   int location)
-{
-	return 0xffff;
-}
-
-/**
- * Perform an MII write. Called by the generic MII routines
- *
- * @dev:      Device to perform write for
- * @phy_id:   The MII phy id
- * @location: Register location to write
- * @val:      Value to write
- */
-static void cvm_oct_mdio_write(struct net_device *dev, int phy_id, int location,
-			       int val)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_wr_dat smi_wr;
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = val;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(0), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 0;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64);
-
-	do {
-		if (!in_interrupt())
-			yield();
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(0));
-	} while (smi_wr.s.pending);
-}
-
-static void cvm_oct_mdio_dummy_write(struct net_device *dev, int phy_id,
-				     int location, int val)
-{
-}
-
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
@@ -125,49 +52,37 @@ static void cvm_oct_get_drvinfo(struct net_device *dev,
 static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_ethtool_gset(&priv->mii_info, cmd);
-	up(&mdio_sem);
+	if (priv->phydev)
+		return phy_ethtool_gset(priv->phydev, cmd);
 
-	return ret;
+	return -EINVAL;
 }
 
 static int cvm_oct_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_ethtool_sset(&priv->mii_info, cmd);
-	up(&mdio_sem);
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (priv->phydev)
+		return phy_ethtool_sset(priv->phydev, cmd);
 
-	return ret;
+	return -EINVAL;
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_nway_restart(&priv->mii_info);
-	up(&mdio_sem);
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
 
-	return ret;
-}
+	if (priv->phydev)
+		return phy_start_aneg(priv->phydev);
 
-static u32 cvm_oct_get_link(struct net_device *dev)
-{
-	struct octeon_ethernet *priv = netdev_priv(dev);
-	u32 ret;
-
-	down(&mdio_sem);
-	ret = mii_link_ok(&priv->mii_info);
-	up(&mdio_sem);
-
-	return ret;
+	return -EINVAL;
 }
 
 const struct ethtool_ops cvm_oct_ethtool_ops = {
@@ -175,7 +90,7 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
 	.get_settings = cvm_oct_get_settings,
 	.set_settings = cvm_oct_set_settings,
 	.nway_reset = cvm_oct_nway_reset,
-	.get_link = cvm_oct_get_link,
+	.get_link = ethtool_op_get_link,
 	.get_sg = ethtool_op_get_sg,
 	.get_tx_csum = ethtool_op_get_tx_csum,
 };
@@ -191,41 +106,78 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(rq);
-	unsigned int duplex_chg;
-	int ret;
 
-	down(&mdio_sem);
-	ret = generic_mii_ioctl(&priv->mii_info, data, cmd, &duplex_chg);
-	up(&mdio_sem);
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -EINVAL;
+
+	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+}
 
-	return ret;
+static void cvm_oct_adjust_link(struct net_device *dev)
+{
+	struct octeon_ethernet *priv = netdev_priv(dev);
+	cvmx_helper_link_info_t link_info;
+
+	if (priv->last_link != priv->phydev->link) {
+		priv->last_link = priv->phydev->link;
+		link_info.u64 = 0;
+		link_info.s.link_up = priv->last_link ? 1 : 0;
+		link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0;
+		link_info.s.speed = priv->phydev->speed;
+		cvmx_helper_link_set( priv->port, link_info);
+		if (priv->last_link) {
+			netif_carrier_on(dev);
+			if (priv->queue != -1)
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, queue %2d\n",
+					   dev->name, priv->phydev->speed,
+					   priv->phydev->duplex ?
+						"Full" : "Half",
+					   priv->port, priv->queue);
+			else
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, POW\n",
+					   dev->name, priv->phydev->speed,
+					   priv->phydev->duplex ?
+						"Full" : "Half",
+					   priv->port);
+		} else {
+			netif_carrier_off(dev);
+			DEBUGPRINT("%s: Link down\n", dev->name);
+		}
+	}
 }
 
+
 /**
- * Setup the MDIO device structures
+ * Setup the PHY
  *
  * @dev:    Device to setup
  *
  * Returns Zero on success, negative on failure
  */
-int cvm_oct_mdio_setup_device(struct net_device *dev)
+int cvm_oct_phy_setup_device(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int phy_id = cvmx_helper_board_get_mii_address(priv->port);
-	if (phy_id != -1) {
-		priv->mii_info.dev = dev;
-		priv->mii_info.phy_id = phy_id;
-		priv->mii_info.phy_id_mask = 0xff;
-		priv->mii_info.supports_gmii = 1;
-		priv->mii_info.reg_num_mask = 0x1f;
-		priv->mii_info.mdio_read = cvm_oct_mdio_read;
-		priv->mii_info.mdio_write = cvm_oct_mdio_write;
-	} else {
-		/* Supply dummy MDIO routines so the kernel won't crash
-		   if the user tries to read them */
-		priv->mii_info.mdio_read = cvm_oct_mdio_dummy_read;
-		priv->mii_info.mdio_write = cvm_oct_mdio_dummy_write;
+
+	int phy_addr = cvmx_helper_board_get_mii_address(priv->port);
+	if (phy_addr != -1) {
+		char phy_id[20];
+
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr);
+
+		priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0,
+					PHY_INTERFACE_MODE_GMII);
+
+		if (IS_ERR(priv->phydev)) {
+			priv->phydev = NULL;
+			return -1;
+		}
+		priv->last_link = 0;
+		phy_start_aneg(priv->phydev);
 	}
 	return 0;
 }
diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h
index b3328ae..55d0614a 100644
--- a/drivers/staging/octeon/ethernet-mdio.h
+++ b/drivers/staging/octeon/ethernet-mdio.h
@@ -43,4 +43,4 @@
 
 extern const struct ethtool_ops cvm_oct_ethtool_ops;
 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-int cvm_oct_mdio_setup_device(struct net_device *dev);
+int cvm_oct_phy_setup_device(struct net_device *dev);
diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c
index 8fa88fc..16308d4 100644
--- a/drivers/staging/octeon/ethernet-proc.c
+++ b/drivers/staging/octeon/ethernet-proc.c
@@ -25,7 +25,6 @@
  * Contact Cavium Networks for more information
 **********************************************************************/
 #include <linux/kernel.h>
-#include <linux/mii.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <net/dst.h>
@@ -38,112 +37,6 @@
 #include "cvmx-helper.h"
 #include "cvmx-pip.h"
 
-static unsigned long long cvm_oct_stats_read_switch(struct net_device *dev,
-						    int phy_id, int offset)
-{
-	struct octeon_ethernet *priv = netdev_priv(dev);
-
-	priv->mii_info.mdio_write(dev, phy_id, 0x1d, 0xcc00 | offset);
-	return ((uint64_t) priv->mii_info.
-		mdio_read(dev, phy_id,
-			  0x1e) << 16) | (uint64_t) priv->mii_info.
-	    mdio_read(dev, phy_id, 0x1f);
-}
-
-static int cvm_oct_stats_switch_show(struct seq_file *m, void *v)
-{
-	static const int ports[] = { 0, 1, 2, 3, 9, -1 };
-	struct net_device *dev = cvm_oct_device[0];
-	int index = 0;
-
-	while (ports[index] != -1) {
-
-		/* Latch port */
-		struct octeon_ethernet *priv = netdev_priv(dev);
-
-		priv->mii_info.mdio_write(dev, 0x1b, 0x1d,
-					  0xdc00 | ports[index]);
-		seq_printf(m, "\nSwitch Port %d\n", ports[index]);
-		seq_printf(m, "InGoodOctets:   %12llu\t"
-			   "OutOctets:      %12llu\t"
-			   "64 Octets:      %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b,
-						     0x00) |
-			   (cvm_oct_stats_read_switch(dev, 0x1b, 0x01) << 32),
-			   cvm_oct_stats_read_switch(dev, 0x1b,
-						     0x0E) |
-			   (cvm_oct_stats_read_switch(dev, 0x1b, 0x0F) << 32),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x08));
-
-		seq_printf(m, "InBadOctets:    %12llu\t"
-			   "OutUnicast:     %12llu\t"
-			   "65-127 Octets:  %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x02),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x10),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x09));
-
-		seq_printf(m, "InUnicast:      %12llu\t"
-			   "OutBroadcasts:  %12llu\t"
-			   "128-255 Octets: %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x04),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x13),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x0A));
-
-		seq_printf(m, "InBroadcasts:   %12llu\t"
-			   "OutMulticasts:  %12llu\t"
-			   "256-511 Octets: %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x06),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x12),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x0B));
-
-		seq_printf(m, "InMulticasts:   %12llu\t"
-			   "OutPause:       %12llu\t"
-			   "512-1023 Octets:%12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x07),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x15),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x0C));
-
-		seq_printf(m, "InPause:        %12llu\t"
-			   "Excessive:      %12llu\t"
-			   "1024-Max Octets:%12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x16),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x11),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x0D));
-
-		seq_printf(m, "InUndersize:    %12llu\t"
-			   "Collisions:     %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x18),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1E));
-
-		seq_printf(m, "InFragments:    %12llu\t"
-			   "Deferred:       %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x19),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x05));
-
-		seq_printf(m, "InOversize:     %12llu\t"
-			   "Single:         %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1A),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x14));
-
-		seq_printf(m, "InJabber:       %12llu\t"
-			   "Multiple:       %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1B),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x17));
-
-		seq_printf(m, "In RxErr:       %12llu\t"
-			   "OutFCSErr:      %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1C),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x03));
-
-		seq_printf(m, "InFCSErr:       %12llu\t"
-			   "Late:           %12llu\n",
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1D),
-			   cvm_oct_stats_read_switch(dev, 0x1b, 0x1F));
-		index++;
-	}
-	return 0;
-}
-
 /**
  * User is reading /proc/octeon_ethernet_stats
  *
@@ -215,11 +108,6 @@ static int cvm_oct_stats_show(struct seq_file *m, void *v)
 		}
 	}
 
-	if (cvm_oct_device[0]) {
-		priv = netdev_priv(cvm_oct_device[0]);
-		if (priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII)
-			cvm_oct_stats_switch_show(m, v);
-	}
 	return 0;
 }
 
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index fbaa465..3820f1e 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -147,32 +147,36 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
 		cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface),
 			       gmxx_rxx_int_reg.u64);
 	}
-
-	link_info = cvmx_helper_link_autoconf(priv->port);
-	priv->link_info = link_info.u64;
+	if (priv->phydev == NULL) {
+		link_info = cvmx_helper_link_autoconf(priv->port);
+		priv->link_info = link_info.u64;
+	}
 	spin_unlock_irqrestore(&global_register_lock, flags);
 
-	/* Tell Linux */
-	if (link_info.s.link_up) {
-
-		if (!netif_carrier_ok(dev))
-			netif_carrier_on(dev);
-		if (priv->queue != -1)
-			DEBUGPRINT
-			    ("%s: %u Mbps %s duplex, port %2d, queue %2d\n",
-			     dev->name, link_info.s.speed,
-			     (link_info.s.full_duplex) ? "Full" : "Half",
-			     priv->port, priv->queue);
-		else
-			DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n",
-				   dev->name, link_info.s.speed,
-				   (link_info.s.full_duplex) ? "Full" : "Half",
-				   priv->port);
-	} else {
-
-		if (netif_carrier_ok(dev))
-			netif_carrier_off(dev);
-		DEBUGPRINT("%s: Link down\n", dev->name);
+	if (priv->phydev == NULL) {
+		/* Tell core. */
+		if (link_info.s.link_up) {
+			if (!netif_carrier_ok(dev))
+				netif_carrier_on(dev);
+			if (priv->queue != -1)
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, queue %2d\n",
+					   dev->name, link_info.s.speed,
+					   (link_info.s.full_duplex) ?
+						"Full" : "Half",
+					   priv->port, priv->queue);
+			else
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, POW\n",
+					   dev->name, link_info.s.speed,
+					   (link_info.s.full_duplex) ?
+						"Full" : "Half",
+					   priv->port);
+		} else {
+			if (netif_carrier_ok(dev))
+				netif_carrier_off(dev);
+			DEBUGPRINT("%s: Link down\n", dev->name);
+		}
 	}
 }
 
diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c
index 2b54996..6061d01 100644
--- a/drivers/staging/octeon/ethernet-sgmii.c
+++ b/drivers/staging/octeon/ethernet-sgmii.c
@@ -113,7 +113,7 @@ int cvm_oct_sgmii_init(struct net_device *dev)
 	struct octeon_ethernet *priv = netdev_priv(dev);
 	cvm_oct_common_init(dev);
 	dev->netdev_ops->ndo_stop(dev);
-	if (!octeon_is_simulation())
+	if (!octeon_is_simulation() && priv->phydev == NULL)
 		priv->poll = cvm_oct_sgmii_poll;
 
 	/* FIXME: Need autoneg logic */
diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c
index 0c2e7cc..ee3dc41 100644
--- a/drivers/staging/octeon/ethernet-xaui.c
+++ b/drivers/staging/octeon/ethernet-xaui.c
@@ -112,7 +112,7 @@ int cvm_oct_xaui_init(struct net_device *dev)
 	struct octeon_ethernet *priv = netdev_priv(dev);
 	cvm_oct_common_init(dev);
 	dev->netdev_ops->ndo_stop(dev);
-	if (!octeon_is_simulation())
+	if (!octeon_is_simulation() && priv->phydev == NULL)
 		priv->poll = cvm_oct_xaui_poll;
 
 	return 0;
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 492c502..4cfd4b1 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -30,7 +30,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
 
 #include <net/dst.h>
 
@@ -132,8 +132,6 @@ static struct timer_list cvm_oct_poll_timer;
  */
 struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS];
 
-extern struct semaphore mdio_sem;
-
 /**
  * Periodic timer tick for slow management operations
  *
@@ -160,13 +158,8 @@ static void cvm_do_timer(unsigned long arg)
 		goto out;
 
 	priv = netdev_priv(cvm_oct_device[port]);
-	if (priv->poll) {
-		/* skip polling if we don't get the lock */
-		if (!down_trylock(&mdio_sem)) {
-			priv->poll(cvm_oct_device[port]);
-			up(&mdio_sem);
-		}
-	}
+	if (priv->poll)
+		priv->poll(cvm_oct_device[port]);
 
 	queues_per_port = cvmx_pko_get_num_queues(port);
 	/* Drain any pending packets in the free list */
@@ -524,7 +517,7 @@ int cvm_oct_common_init(struct net_device *dev)
 	dev->features |= NETIF_F_LLTX;
 	SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops);
 
-	cvm_oct_mdio_setup_device(dev);
+	cvm_oct_phy_setup_device(dev);
 	dev->netdev_ops->ndo_set_mac_address(dev, &sa);
 	dev->netdev_ops->ndo_change_mtu(dev, dev->mtu);
 
@@ -540,7 +533,10 @@ int cvm_oct_common_init(struct net_device *dev)
 
 void cvm_oct_common_uninit(struct net_device *dev)
 {
-	/* Currently nothing to do */
+	struct octeon_ethernet *priv = netdev_priv(dev);
+
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
 }
 
 static const struct net_device_ops cvm_oct_npi_netdev_ops = {
@@ -627,6 +623,8 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = {
 #endif
 };
 
+extern void octeon_mdiobus_force_mod_depencency(void);
+
 /**
  * Module/ driver initialization. Creates the linux network
  * devices.
@@ -640,6 +638,7 @@ static int __init cvm_oct_init_module(void)
 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
 	int qos;
 
+	octeon_mdiobus_force_mod_depencency();
 	pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION);
 
 	if (OCTEON_IS_MODEL(OCTEON_CN52XX))
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index 3aef987..402a15b 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -50,9 +50,9 @@ struct octeon_ethernet {
 	/* List of outstanding tx buffers per queue */
 	struct sk_buff_head tx_free_list[16];
 	/* Device statistics */
-	struct net_device_stats stats
-;	/* Generic MII info structure */
-	struct mii_if_info mii_info;
+	struct net_device_stats stats;
+	struct phy_device *phydev;
+	unsigned int last_link;
 	/* Last negotiated link state */
 	uint64_t link_info;
 	/* Called periodically to check link status */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d958b76..da84fd0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -815,16 +815,6 @@ config PNX833X_WDT
 	  timer has expired and no process has written to /dev/watchdog during
 	  that time.
 
-config WDT_RM9K_GPI
-	tristate "RM9000/GPI hardware watchdog"
-	depends on CPU_RM9000
-	help
-	  Watchdog implementation using the GPI hardware found on
-	  PMC-Sierra RM9xxx CPUs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rm9k_wdt.
-
 config SIBYTE_WDOG
 	tristate "Sibyte SoC hardware watchdog"
 	depends on CPU_SB1
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 89c045d..475c611 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
 obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
-obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
deleted file mode 100644
index bb66958..0000000
--- a/drivers/watchdog/rm9k_wdt.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- *  Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx
- *  chips.
- *
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/reboot.h>
-#include <linux/notifier.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <asm/atomic.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <rm9k_wdt.h>
-
-
-#define CLOCK                  125000000
-#define MAX_TIMEOUT_SECONDS    32
-#define CPCCR                  0x0080
-#define CPGIG1SR               0x0044
-#define CPGIG1ER               0x0054
-
-
-/* Function prototypes */
-static irqreturn_t wdt_gpi_irqhdl(int, void *);
-static void wdt_gpi_start(void);
-static void wdt_gpi_stop(void);
-static void wdt_gpi_set_timeout(unsigned int);
-static int wdt_gpi_open(struct inode *, struct file *);
-static int wdt_gpi_release(struct inode *, struct file *);
-static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
-								loff_t *);
-static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
-static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
-static const struct resource *wdt_gpi_get_resource(struct platform_device *,
-						const char *, unsigned int);
-static int __init wdt_gpi_probe(struct platform_device *);
-static int __exit wdt_gpi_remove(struct platform_device *);
-
-
-static const char wdt_gpi_name[] = "wdt_gpi";
-static atomic_t opencnt;
-static int expect_close;
-static int locked;
-
-
-/* These are set from device resources */
-static void __iomem *wd_regs;
-static unsigned int wd_irq, wd_ctr;
-
-
-/* Module arguments */
-static int timeout = MAX_TIMEOUT_SECONDS;
-module_param(timeout, int, 0444);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
-
-static unsigned long resetaddr = 0xbffdc200;
-module_param(resetaddr, ulong, 0444);
-MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset");
-
-static unsigned long flagaddr = 0xbffdc104;
-module_param(flagaddr, ulong, 0444);
-MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to");
-
-static int powercycle;
-module_param(powercycle, bool, 0444);
-MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0444);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
-
-
-/* Kernel interfaces */
-static const struct file_operations fops = {
-	.owner		= THIS_MODULE,
-	.open		= wdt_gpi_open,
-	.release	= wdt_gpi_release,
-	.write		= wdt_gpi_write,
-	.unlocked_ioctl	= wdt_gpi_ioctl,
-};
-
-static struct miscdevice miscdev = {
-	.minor		= WATCHDOG_MINOR,
-	.name		= wdt_gpi_name,
-	.fops		= &fops,
-};
-
-static struct notifier_block wdt_gpi_shutdown = {
-	.notifier_call	= wdt_gpi_notify,
-};
-
-
-/* Interrupt handler */
-static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
-{
-	if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
-		return IRQ_NONE;
-	__raw_writel(0x1, wd_regs + 0x0008);
-
-
-	printk(KERN_CRIT "%s: watchdog expired - resetting system\n",
-		wdt_gpi_name);
-
-	*(volatile char *) flagaddr |= 0x01;
-	*(volatile char *) resetaddr = powercycle ? 0x01 : 0x2;
-	iob();
-	while (1)
-		cpu_relax();
-}
-
-
-/* Watchdog functions */
-static void wdt_gpi_start(void)
-{
-	u32 reg;
-
-	lock_titan_regs();
-	reg = titan_readl(CPGIG1ER);
-	titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER);
-	iob();
-	unlock_titan_regs();
-}
-
-static void wdt_gpi_stop(void)
-{
-	u32 reg;
-
-	lock_titan_regs();
-	reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
-	titan_writel(reg, CPCCR);
-	reg = titan_readl(CPGIG1ER);
-	titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER);
-	iob();
-	unlock_titan_regs();
-}
-
-static void wdt_gpi_set_timeout(unsigned int to)
-{
-	u32 reg;
-	const u32 wdval = (to * CLOCK) & ~0x0000000f;
-
-	lock_titan_regs();
-	reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
-	titan_writel(reg, CPCCR);
-	wmb();
-	__raw_writel(wdval, wd_regs + 0x0000);
-	wmb();
-	titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR);
-	wmb();
-	titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR);
-	iob();
-	unlock_titan_regs();
-}
-
-
-/* /dev/watchdog operations */
-static int wdt_gpi_open(struct inode *inode, struct file *file)
-{
-	int res;
-
-	if (unlikely(atomic_dec_if_positive(&opencnt) < 0))
-		return -EBUSY;
-
-	expect_close = 0;
-	if (locked) {
-		module_put(THIS_MODULE);
-		free_irq(wd_irq, &miscdev);
-		locked = 0;
-	}
-
-	res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED,
-			  wdt_gpi_name, &miscdev);
-	if (unlikely(res))
-		return res;
-
-	wdt_gpi_set_timeout(timeout);
-	wdt_gpi_start();
-
-	printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n",
-		wdt_gpi_name, timeout);
-	return nonseekable_open(inode, file);
-}
-
-static int wdt_gpi_release(struct inode *inode, struct file *file)
-{
-	if (nowayout) {
-		printk(KERN_INFO "%s: no way out - watchdog left running\n",
-			wdt_gpi_name);
-		__module_get(THIS_MODULE);
-		locked = 1;
-	} else {
-		if (expect_close) {
-			wdt_gpi_stop();
-			free_irq(wd_irq, &miscdev);
-			printk(KERN_INFO "%s: watchdog stopped\n",
-							wdt_gpi_name);
-		} else {
-			printk(KERN_CRIT "%s: unexpected close() -"
-				" watchdog left running\n",
-				wdt_gpi_name);
-			wdt_gpi_set_timeout(timeout);
-			__module_get(THIS_MODULE);
-			locked = 1;
-		}
-	}
-
-	atomic_inc(&opencnt);
-	return 0;
-}
-
-static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
-								loff_t *o)
-{
-	char val;
-
-	wdt_gpi_set_timeout(timeout);
-	expect_close = (s > 0) && !get_user(val, d) && (val == 'V');
-	return s ? 1 : 0;
-}
-
-static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
-{
-	long res = -ENOTTY;
-	const long size = _IOC_SIZE(cmd);
-	int stat;
-	void __user *argp = (void __user *)arg;
-	static struct watchdog_info wdinfo = {
-		.identity               = "RM9xxx/GPI watchdog",
-		.firmware_version       = 0,
-		.options                = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
-	};
-
-	if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE))
-		return -ENOTTY;
-
-	if ((_IOC_DIR(cmd) & _IOC_READ)
-	    && !access_ok(VERIFY_WRITE, arg, size))
-		return -EFAULT;
-
-	if ((_IOC_DIR(cmd) & _IOC_WRITE)
-	    && !access_ok(VERIFY_READ, arg, size))
-		return -EFAULT;
-
-	expect_close = 0;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		wdinfo.options = nowayout ?
-			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
-			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
-			WDIOF_MAGICCLOSE;
-		res = __copy_to_user(argp, &wdinfo, size) ?  -EFAULT : size;
-		break;
-
-	case WDIOC_GETSTATUS:
-		break;
-
-	case WDIOC_GETBOOTSTATUS:
-		stat = (*(volatile char *) flagaddr & 0x01)
-			? WDIOF_CARDRESET : 0;
-		res = __copy_to_user(argp, &stat, size) ?
-			-EFAULT : size;
-		break;
-
-	case WDIOC_SETOPTIONS:
-		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_gpi_set_timeout(timeout);
-		res = size;
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		{
-			int val;
-			if (unlikely(__copy_from_user(&val, argp, size))) {
-				res = -EFAULT;
-				break;
-			}
-
-			if (val > MAX_TIMEOUT_SECONDS)
-				val = MAX_TIMEOUT_SECONDS;
-			timeout = val;
-			wdt_gpi_set_timeout(val);
-			res = size;
-			printk(KERN_INFO "%s: timeout set to %u seconds\n",
-				wdt_gpi_name, timeout);
-		}
-		break;
-
-	case WDIOC_GETTIMEOUT:
-		res = __copy_to_user(argp, &timeout, size) ?
-			-EFAULT : size;
-		break;
-	}
-
-	return res;
-}
-
-
-/* Shutdown notifier */
-static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
-			  void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		wdt_gpi_stop();
-
-	return NOTIFY_DONE;
-}
-
-
-/* Init & exit procedures */
-static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
-					const char *name, unsigned int type)
-{
-	char buf[80];
-	if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf))
-		return NULL;
-	return platform_get_resource_byname(pdv, type, buf);
-}
-
-/* No hotplugging on the platform bus - use __devinit */
-static int __devinit wdt_gpi_probe(struct platform_device *pdv)
-{
-	int res;
-	const struct resource
-		* const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS,
-						  IORESOURCE_MEM),
-		* const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ,
-						  IORESOURCE_IRQ),
-		* const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER,
-						  0);
-
-	if (unlikely(!rr || !ri || !rc))
-		return -ENXIO;
-
-	wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start);
-	if (unlikely(!wd_regs))
-		return -ENOMEM;
-	wd_irq = ri->start;
-	wd_ctr = rc->start;
-	res = misc_register(&miscdev);
-	if (res)
-		iounmap(wd_regs);
-	else
-		register_reboot_notifier(&wdt_gpi_shutdown);
-	return res;
-}
-
-static int __devexit wdt_gpi_remove(struct platform_device *dev)
-{
-	int res;
-
-	unregister_reboot_notifier(&wdt_gpi_shutdown);
-	res = misc_deregister(&miscdev);
-	iounmap(wd_regs);
-	wd_regs = NULL;
-	return res;
-}
-
-
-/* Device driver init & exit */
-static struct platform_driver wgt_gpi_driver = {
-	.driver = {
-		.name		= wdt_gpi_name,
-		.owner		= THIS_MODULE,
-	},
-	.probe		= wdt_gpi_probe,
-	.remove		= __devexit_p(wdt_gpi_remove),
-};
-
-static int __init wdt_gpi_init_module(void)
-{
-	atomic_set(&opencnt, 1);
-	if (timeout > MAX_TIMEOUT_SECONDS)
-		timeout = MAX_TIMEOUT_SECONDS;
-	return platform_driver_register(&wdt_gpi_driver);
-}
-
-static void __exit wdt_gpi_cleanup_module(void)
-{
-	platform_driver_unregister(&wdt_gpi_driver);
-}
-
-module_init(wdt_gpi_init_module);
-module_exit(wdt_gpi_cleanup_module);
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 341b589..0b94d2f 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -207,6 +207,7 @@ endif
 
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
 	"$(if $(CONFIG_64BIT),64,32)" \
 	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
 	"$(if $(part-of-module),1,0)" "$(@)";
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 9cf0a6f..92f09fe 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -113,13 +113,13 @@ $P =~ s@.*/@@g;
 
 my $V = '0.1';
 
-if ($#ARGV != 10) {
-	print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
+if ($#ARGV != 11) {
+	print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
 	print "version: $V\n";
 	exit(1);
 }
 
-my ($arch, $bits, $objdump, $objcopy, $cc,
+my ($arch, $endian, $bits, $objdump, $objcopy, $cc,
     $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
 
 # This file refers to mcount and shouldn't be ftraced, so lets' ignore it
@@ -295,6 +295,58 @@ if ($arch eq "x86_64") {
     $ld .= " -m elf64_sparc";
     $cc .= " -m64";
     $objcopy .= " -O elf64-sparc";
+} elsif ($arch eq "mips") {
+    # To enable module support, we need to enable the -mlong-calls option
+    # of gcc for module, after using this option, we can not get the real
+    # offset of the calling to _mcount, but the offset of the lui
+    # instruction or the addiu one. herein, we record the address of the
+    # first one, and then we can replace this instruction by a branch
+    # instruction to jump over the profiling function to filter the
+    # indicated functions, or swith back to the lui instruction to trace
+    # them, which means dynamic tracing.
+    #
+    #       c:	3c030000 	lui	v1,0x0
+    #			c: R_MIPS_HI16	_mcount
+    #			c: R_MIPS_NONE	*ABS*
+    #			c: R_MIPS_NONE	*ABS*
+    #      10:	64630000 	daddiu	v1,v1,0
+    #			10: R_MIPS_LO16	_mcount
+    #			10: R_MIPS_NONE	*ABS*
+    #			10: R_MIPS_NONE	*ABS*
+    #      14:	03e0082d 	move	at,ra
+    #      18:	0060f809 	jalr	v1
+    #
+    # for the kernel:
+    #
+    #     10:   03e0082d        move    at,ra
+    #	  14:   0c000000        jal     0 <loongson_halt>
+    #                    14: R_MIPS_26   _mcount
+    #                    14: R_MIPS_NONE *ABS*
+    #                    14: R_MIPS_NONE *ABS*
+    #	 18:   00020021        nop
+    if ($is_module eq "0") {
+	    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+    } else {
+	    $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$";
+    }
+    $objdump .= " -Melf-trad".$endian."mips ";
+
+    if ($endian eq "big") {
+	    $endian = " -EB ";
+	    $ld .= " -melf".$bits."btsmip";
+    } else {
+	    $endian = " -EL ";
+	    $ld .= " -melf".$bits."ltsmip";
+    }
+
+    $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian;
+    $ld .= $endian;
+
+    if ($bits == 64) {
+	    $function_regex =
+		"^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:";
+	    $type = ".dword";
+    }
 } elsif ($arch eq "microblaze") {
     # Microblaze calls '_mcount' instead of plain 'mcount'.
     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";