summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2012-12-24 16:01:39 -0200
committerShawn Guo <shawn.guo@linaro.org>2012-12-25 22:17:59 +0800
commit664e9e495a3ada96ed2ebab89edb40c4fc132bd7 (patch)
tree0728b3684a93c9ca1a70bf0fce9b99a0acb917b9
parenta49f0d1ea3ec94fc7cf33a7c36a16343b74bd565 (diff)
downloadop-kernel-dev-664e9e495a3ada96ed2ebab89edb40c4fc132bd7.zip
op-kernel-dev-664e9e495a3ada96ed2ebab89edb40c4fc132bd7.tar.gz
ARM: dts: imx23-olinuxino: Fix IOMUX settings
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-rw-r--r--arch/arm/boot/dts/imx23-olinuxino.dts8
1 files changed, 4 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7c43b8e..e7484e4 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -39,17 +39,17 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
- 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+ 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
- led_pin_gpio0_17: led_gpio0_17@0 {
+ led_pin_gpio2_1: led_gpio2_1@0 {
reg = <0>;
fsl,pinmux-ids = <
- 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+ 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -110,7 +110,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio0_17>;
+ pinctrl-0 = <&led_pin_gpio2_1>;
user {
label = "green";
OpenPOWER on IntegriCloud