summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2013-09-13 21:45:51 +0200
committerMike Turquette <mturquette@linaro.org>2013-10-01 21:39:56 -0700
commitb9b5ab11ea221a9f2d5af41da639e0898675c34c (patch)
tree4f5e06454e4d69b4f20de73e0d02d65ca818bef8
parent15c03dd4859ab16f9212238f29dd315654aa94f6 (diff)
downloadop-kernel-dev-b9b5ab11ea221a9f2d5af41da639e0898675c34c.zip
op-kernel-dev-b9b5ab11ea221a9f2d5af41da639e0898675c34c.tar.gz
clk: nomadik: set all timers to use 2.4 MHz TIMCLK
This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-rw-r--r--drivers/clk/clk-nomadik.c21
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2..4d978a3 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
*/
#define SRC_CR 0x00U
+#define SRC_CR_T0_ENSEL BIT(15)
+#define SRC_CR_T1_ENSEL BIT(17)
+#define SRC_CR_T2_ENSEL BIT(19)
+#define SRC_CR_T3_ENSEL BIT(21)
+#define SRC_CR_T4_ENSEL BIT(23)
+#define SRC_CR_T5_ENSEL BIT(25)
+#define SRC_CR_T6_ENSEL BIT(27)
+#define SRC_CR_T7_ENSEL BIT(29)
#define SRC_XTALCR 0x0CU
#define SRC_XTALCR_XTALTIMEN BIT(20)
#define SRC_XTALCR_SXTALDIS BIT(19)
@@ -543,6 +551,19 @@ void __init nomadik_clk_init(void)
__func__, np->name);
return;
}
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
val = readl(src_base + SRC_XTALCR);
pr_info("SXTALO is %s\n",
(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
OpenPOWER on IntegriCloud