diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-23 14:05:44 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-23 14:05:44 -0700 |
commit | 6d6be43d4dfdb167ef72f4aa665c1607db799be4 (patch) | |
tree | ee4395a5089ae9cfd8a59960085f821883e3fd0f | |
parent | f5fc87905ea075a0b14878086fd4fe38be128844 (diff) | |
parent | 10617340ce1491da7654d408d0d635ba98ef8350 (diff) | |
download | op-kernel-dev-6d6be43d4dfdb167ef72f4aa665c1607db799be4.zip op-kernel-dev-6d6be43d4dfdb167ef72f4aa665c1607db799be4.tar.gz |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (43 commits)
Blackfin: spi-docs: further clarify GPIO CS behavior with various modes
Blackfin: boards: fix pcm device name
Blackfin: SMP: punt unused atomic_test_mask helper
Blackfin: irqs: do not trace arch_local_{*,irq_*} functions
Blackfin: bf526: restrict reboot workaround to 0.0 silicon
Blackfin: bf51x: fix alternative portmux options
Blackfin: bf54x: fix GPIO resume code
Blackfin: dpmc: optimize SDRAM programming slightly
Blackfin: dpmc: don't save/restore scratch registers
Blackfin: bf538: pull gpio/port logic out of core hibernate paths
Blackfin: dpmc: optimize hibernate/resume path
Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating
Blackfin: dpmc: relocate hibernate helper macros
Blackfin: dpmc: omit RETE/RETN when hibernating
Blackfin: dpmc: optimize SIC_IWR programming a little
Blackfin: gpio/ints: generalize pint logic
Blackfin: dpmc: bind to MMR names and not CPUs
Blackfin: debug-mmrs: generalize pint logic
Blackfin: bf54x: switch to common pint MMR struct
Blackfin: bf54x: tweak MMR pint names
...
115 files changed, 1735 insertions, 2138 deletions
diff --git a/Documentation/blackfin/bfin-spi-notes.txt b/Documentation/blackfin/bfin-spi-notes.txt index 556fa87..eae6eaf 100644 --- a/Documentation/blackfin/bfin-spi-notes.txt +++ b/Documentation/blackfin/bfin-spi-notes.txt @@ -9,6 +9,8 @@ the entire SPI transfer. - And not just bits_per_word duration. In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2 timing, you can utilize the GPIO controlled SPI Slave Select option instead. +In this case, you should use GPIO based CS for all of your slaves and not just +the ones using mode 0 or 2 in order to guarantee correct CS toggling behavior. You can even use the same pin whose peripheral role is a SSEL, but use it as a GPIO instead. diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index d619b17..c747629 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -953,6 +953,16 @@ config BFIN_GPTIMERS To compile this driver as a module, choose M here: the module will be called gptimers. +config HAVE_PWM + tristate "Enable PWM API support" + depends on BFIN_GPTIMERS + help + Enable support for the Pulse Width Modulation framework (as + found in linux/pwm.h). + + To compile this driver as a module, choose M here: the module + will be called pwm. + choice prompt "Uncached DMA region" default DMA_UNCACHED_1M diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 1c0a82a..d7ff2ae 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -58,13 +58,13 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=m +CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=m -CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m -CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 9e7c537..7a075ea 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,5 +1,48 @@ include include/asm-generic/Kbuild.asm +generic-y += auxvec.h +generic-y += bitsperlong.h +generic-y += bugs.h +generic-y += cputime.h +generic-y += current.h +generic-y += device.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fb.h +generic-y += futex.h +generic-y += hw_irq.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += local64.h +generic-y += local.h +generic-y += mman.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += percpu.h +generic-y += pgalloc.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += setup.h +generic-y += shmbuf.h +generic-y += shmparam.h +generic-y += socket.h +generic-y += sockios.h +generic-y += statfs.h +generic-y += termbits.h +generic-y += termios.h +generic-y += topology.h +generic-y += types.h +generic-y += ucontext.h +generic-y += unaligned.h +generic-y += user.h +generic-y += xor.h + header-y += bfin_sport.h header-y += cachectl.h header-y += fixed_code.h diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index e485089..4c707db 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2009 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ @@ -76,11 +76,6 @@ static inline void atomic_set_mask(int mask, atomic_t *v) __raw_atomic_set_asm(&v->counter, mask); } -static inline int atomic_test_mask(int mask, atomic_t *v) -{ - return __raw_atomic_test_asm(&v->counter, mask); -} - /* Atomic operations are already serializing */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h deleted file mode 100644 index 41fa68b..0000000 --- a/arch/blackfin/include/asm/auxvec.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/auxvec.h> diff --git a/arch/blackfin/include/asm/bitsperlong.h b/arch/blackfin/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0..0000000 --- a/arch/blackfin/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bitsperlong.h> diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index eb7c144..0928700 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -1,9 +1,9 @@ /* * Common header file for Blackfin family of processors. * -Â * Copyright 2004-2009 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _BLACKFIN_H_ diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h deleted file mode 100644 index 61791e1..0000000 --- a/arch/blackfin/include/asm/bugs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bugs.h> diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h deleted file mode 100644 index 6d68ad7..0000000 --- a/arch/blackfin/include/asm/cputime.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/cputime.h> diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h deleted file mode 100644 index 4c51401..0000000 --- a/arch/blackfin/include/asm/current.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/current.h> diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h deleted file mode 100644 index f0a4c25..0000000 --- a/arch/blackfin/include/asm/device.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/device.h> diff --git a/arch/blackfin/include/asm/div64.h b/arch/blackfin/include/asm/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/arch/blackfin/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index edf2a2a..c4ec959 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -117,7 +117,6 @@ #ifndef __ASSEMBLY__ void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); -void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void do_hibernate(int wakeup); void set_dram_srfs(void); @@ -134,32 +133,6 @@ struct bfin_dpmc_platform_data { unsigned short vr_settling_time; /* in us */ }; -#else - -#define PM_PUSH(x) \ - R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\ - [--SP] = R0;\ - -#define PM_POP(x) \ - R0 = [SP++];\ - [P0 + (x - SRAM_BASE_ADDRESS)] = R0;\ - -#define PM_SYS_PUSH(x) \ - R0 = [P0 + (x - PLL_CTL)];\ - [--SP] = R0;\ - -#define PM_SYS_POP(x) \ - R0 = [SP++];\ - [P0 + (x - PLL_CTL)] = R0;\ - -#define PM_SYS_PUSH16(x) \ - R0 = w[P0 + (x - PLL_CTL)];\ - [--SP] = R0;\ - -#define PM_SYS_POP16(x) \ - R0 = [SP++];\ - w[P0 + (x - PLL_CTL)] = R0;\ - #endif #endif /*_BLACKFIN_DPMC_H_*/ diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h deleted file mode 100644 index 3711bd9..0000000 --- a/arch/blackfin/include/asm/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/emergency-restart.h> diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h deleted file mode 100644 index 4c82b50..0000000 --- a/arch/blackfin/include/asm/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/errno.h> diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h deleted file mode 100644 index 3a4988e..0000000 --- a/arch/blackfin/include/asm/fb.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/fb.h> diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h deleted file mode 100644 index 0b74582..0000000 --- a/arch/blackfin/include/asm/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/futex.h> diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 1ef8417..5a25856 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -16,58 +16,13 @@ #include <mach/gpio.h> -#define GPIO_0 0 -#define GPIO_1 1 -#define GPIO_2 2 -#define GPIO_3 3 -#define GPIO_4 4 -#define GPIO_5 5 -#define GPIO_6 6 -#define GPIO_7 7 -#define GPIO_8 8 -#define GPIO_9 9 -#define GPIO_10 10 -#define GPIO_11 11 -#define GPIO_12 12 -#define GPIO_13 13 -#define GPIO_14 14 -#define GPIO_15 15 -#define GPIO_16 16 -#define GPIO_17 17 -#define GPIO_18 18 -#define GPIO_19 19 -#define GPIO_20 20 -#define GPIO_21 21 -#define GPIO_22 22 -#define GPIO_23 23 -#define GPIO_24 24 -#define GPIO_25 25 -#define GPIO_26 26 -#define GPIO_27 27 -#define GPIO_28 28 -#define GPIO_29 29 -#define GPIO_30 30 -#define GPIO_31 31 -#define GPIO_32 32 -#define GPIO_33 33 -#define GPIO_34 34 -#define GPIO_35 35 -#define GPIO_36 36 -#define GPIO_37 37 -#define GPIO_38 38 -#define GPIO_39 39 -#define GPIO_40 40 -#define GPIO_41 41 -#define GPIO_42 42 -#define GPIO_43 43 -#define GPIO_44 44 -#define GPIO_45 45 -#define GPIO_46 46 -#define GPIO_47 47 - #define PERIPHERAL_USAGE 1 #define GPIO_USAGE 0 +#ifndef BFIN_GPIO_PINT +# define BFIN_GPIO_PINT 0 +#endif + #ifndef __ASSEMBLY__ #include <linux/compiler.h> @@ -89,7 +44,7 @@ * MODIFICATION HISTORY : **************************************************************/ -#ifndef CONFIG_BF54x +#if !BFIN_GPIO_PINT void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -164,6 +119,10 @@ struct gpio_port_t { #ifdef BFIN_SPECIAL_GPIO_BANKS void bfin_special_gpio_free(unsigned gpio); int bfin_special_gpio_request(unsigned gpio, const char *label); +# ifdef CONFIG_PM +void bfin_special_gpio_pm_hibernate_restore(void); +void bfin_special_gpio_pm_hibernate_suspend(void); +# endif #endif #ifdef CONFIG_PM @@ -182,7 +141,7 @@ static inline void bfin_pm_standby_restore(void) void bfin_gpio_pm_hibernate_restore(void); void bfin_gpio_pm_hibernate_suspend(void); -#ifndef CONFIG_BF54x +# if !BFIN_GPIO_PINT int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); struct gpio_port_s { @@ -199,8 +158,9 @@ struct gpio_port_s { unsigned short reserved; unsigned short mux; }; -#endif /*CONFIG_BF54x*/ +# endif #endif /*CONFIG_PM*/ + /*********************************************************** * * FUNCTIONS: Blackfin GPIO Driver diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index 38657da..38bddcb 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -193,6 +193,16 @@ uint16_t get_enabled_gptimers(void); uint32_t get_gptimer_status(unsigned int group); void set_gptimer_status(unsigned int group, uint32_t value); +static inline void enable_gptimer(unsigned int timer_id) +{ + enable_gptimers(1 << timer_id); +} + +static inline void disable_gptimer(unsigned int timer_id) +{ + disable_gptimers(1 << timer_id); +} + /* * All Blackfin system MMRs are padded to 32bits even if the register * itself is only 16bits. So use a helper macro to streamline this. @@ -209,6 +219,15 @@ struct bfin_gptimer_regs { u32 width; }; +/* + * bfin group timer registers layout + */ +struct bfin_gptimer_group_regs { + __BFP(enable); + __BFP(disable); + u32 status; +}; + #undef __BFP #endif diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h deleted file mode 100644 index 1f5ef7d..0000000 --- a/arch/blackfin/include/asm/hw_irq.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/hw_irq.h> diff --git a/arch/blackfin/include/asm/ioctl.h b/arch/blackfin/include/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/blackfin/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51..0000000 --- a/arch/blackfin/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipcbuf.h> diff --git a/arch/blackfin/include/asm/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/blackfin/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index b4bbb75..43eb474 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -18,12 +18,12 @@ extern unsigned long bfin_irq_flags; #endif -static inline void bfin_sti(unsigned long flags) +static inline notrace void bfin_sti(unsigned long flags) { asm volatile("sti %0;" : : "d" (flags)); } -static inline unsigned long bfin_cli(void) +static inline notrace unsigned long bfin_cli(void) { unsigned long flags; asm volatile("cli %0;" : "=d" (flags)); @@ -40,22 +40,22 @@ static inline unsigned long bfin_cli(void) /* * Hard, untraced CPU interrupt flag manipulation and access. */ -static inline void __hard_local_irq_disable(void) +static inline notrace void __hard_local_irq_disable(void) { bfin_cli(); } -static inline void __hard_local_irq_enable(void) +static inline notrace void __hard_local_irq_enable(void) { bfin_sti(bfin_irq_flags); } -static inline unsigned long hard_local_save_flags(void) +static inline notrace unsigned long hard_local_save_flags(void) { return bfin_read_IMASK(); } -static inline unsigned long __hard_local_irq_save(void) +static inline notrace unsigned long __hard_local_irq_save(void) { unsigned long flags; flags = bfin_cli(); @@ -65,18 +65,18 @@ static inline unsigned long __hard_local_irq_save(void) return flags; } -static inline int hard_irqs_disabled_flags(unsigned long flags) +static inline notrace int hard_irqs_disabled_flags(unsigned long flags) { return (flags & ~0x3f) == 0; } -static inline int hard_irqs_disabled(void) +static inline notrace int hard_irqs_disabled(void) { unsigned long flags = hard_local_save_flags(); return hard_irqs_disabled_flags(flags); } -static inline void __hard_local_irq_restore(unsigned long flags) +static inline notrace void __hard_local_irq_restore(unsigned long flags) { if (!hard_irqs_disabled_flags(flags)) __hard_local_irq_enable(); @@ -113,31 +113,31 @@ void ipipe_check_context(struct ipipe_domain *ipd); /* * Interrupt pipe interface to linux/irqflags.h. */ -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { __check_irqop_context(); __ipipe_stall_root(); barrier(); } -static inline void arch_local_irq_enable(void) +static inline notrace void arch_local_irq_enable(void) { barrier(); __check_irqop_context(); __ipipe_unstall_root(); } -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { return __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; } -static inline int arch_irqs_disabled_flags(unsigned long flags) +static inline notrace int arch_irqs_disabled_flags(unsigned long flags) { return flags == bfin_no_irqs; } -static inline unsigned long arch_local_irq_save(void) +static inline notrace unsigned long arch_local_irq_save(void) { unsigned long flags; @@ -148,13 +148,13 @@ static inline unsigned long arch_local_irq_save(void) return flags; } -static inline void arch_local_irq_restore(unsigned long flags) +static inline notrace void arch_local_irq_restore(unsigned long flags) { __check_irqop_context(); __ipipe_restore_root(flags == bfin_no_irqs); } -static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real) +static inline notrace unsigned long arch_mangle_irq_bits(int virt, unsigned long real) { /* * Merge virtual and real interrupt mask bits into a single @@ -163,7 +163,7 @@ static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real) return (real & ~(1 << 31)) | ((virt != 0) << 31); } -static inline int arch_demangle_irq_bits(unsigned long *x) +static inline notrace int arch_demangle_irq_bits(unsigned long *x) { int virt = (*x & (1 << 31)) != 0; *x &= ~(1L << 31); @@ -174,7 +174,7 @@ static inline int arch_demangle_irq_bits(unsigned long *x) * Interface to various arch routines that may be traced. */ #ifdef CONFIG_IPIPE_TRACE_IRQSOFF -static inline void hard_local_irq_disable(void) +static inline notrace void hard_local_irq_disable(void) { if (!hard_irqs_disabled()) { __hard_local_irq_disable(); @@ -182,7 +182,7 @@ static inline void hard_local_irq_disable(void) } } -static inline void hard_local_irq_enable(void) +static inline notrace void hard_local_irq_enable(void) { if (hard_irqs_disabled()) { ipipe_trace_end(0x80000000); @@ -190,7 +190,7 @@ static inline void hard_local_irq_enable(void) } } -static inline unsigned long hard_local_irq_save(void) +static inline notrace unsigned long hard_local_irq_save(void) { unsigned long flags = hard_local_save_flags(); if (!hard_irqs_disabled_flags(flags)) { @@ -200,7 +200,7 @@ static inline unsigned long hard_local_irq_save(void) return flags; } -static inline void hard_local_irq_restore(unsigned long flags) +static inline notrace void hard_local_irq_restore(unsigned long flags) { if (!hard_irqs_disabled_flags(flags)) { ipipe_trace_end(0x80000001); diff --git a/arch/blackfin/include/asm/kdebug.h b/arch/blackfin/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/arch/blackfin/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h deleted file mode 100644 index 3575c64..0000000 --- a/arch/blackfin/include/asm/kmap_types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kmap_types.h> diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h deleted file mode 100644 index c11c530..0000000 --- a/arch/blackfin/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local.h> diff --git a/arch/blackfin/include/asm/local64.h b/arch/blackfin/include/asm/local64.h deleted file mode 100644 index 36c93b5..0000000 --- a/arch/blackfin/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h deleted file mode 100644 index 8eebf89..0000000 --- a/arch/blackfin/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/mman.h> diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h index 4282b16..ed5689b 100644 --- a/arch/blackfin/include/asm/module.h +++ b/arch/blackfin/include/asm/module.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2008 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _ASM_BFIN_MODULE_H #define _ASM_BFIN_MODULE_H diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h deleted file mode 100644 index 809134c..0000000 --- a/arch/blackfin/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/msgbuf.h> diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h index f726e3a..ff6101a 100644 --- a/arch/blackfin/include/asm/mutex.h +++ b/arch/blackfin/include/asm/mutex.h @@ -1,76 +1 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - * - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _ASM_MUTEX_H -#define _ASM_MUTEX_H - -#ifndef CONFIG_SMP -#include <asm-generic/mutex.h> -#else - -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - if (unlikely(atomic_dec_return(count) < 0)) - fail_fn(count); - else - smp_mb(); -} - -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); - else { - smp_mb(); - return 0; - } -} - -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - smp_mb(); - if (unlikely(atomic_inc_return(count) <= 0)) - fail_fn(count); -} - -#define __mutex_slowpath_needs_to_unlock() 1 - -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - /* - * We have two variants here. The cmpxchg based one is the best one - * because it never induce a false contention state. It is included - * here because architectures using the inc/dec algorithms over the - * xchg ones are much more likely to support cmpxchg natively. - * - * If not we fall back to the spinlock based variant - that is - * just as efficient (and simpler) as a 'destructive' probing of - * the mutex state would be. - */ -#ifdef __HAVE_ARCH_CMPXCHG - if (likely(atomic_cmpxchg(count, 1, 0) == 1)) { - smp_mb(); - return 1; - } - return 0; -#else - return fail_fn(count); -#endif -} - -#endif - -#endif +#include <asm-generic/mutex-dec.h> diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index d0ce975..7202404 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2009 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h deleted file mode 100644 index 965d454..0000000 --- a/arch/blackfin/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/param.h> diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index d49bb26..28c2498 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -54,6 +54,16 @@ struct blackfin_pda { /* Per-processor Data Area */ #endif }; +struct blackfin_initial_pda { + void *retx; +#ifdef CONFIG_DEBUG_DOUBLEFAULT + void *dcplb_doublefault_addr; + void *icplb_doublefault_addr; + void *retx_doublefault; + unsigned seqstat_doublefault; +#endif +}; + extern struct blackfin_pda cpu_pda[]; #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h deleted file mode 100644 index 06a959d..0000000 --- a/arch/blackfin/include/asm/percpu.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/percpu.h> diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h deleted file mode 100644 index f261cb7..0000000 --- a/arch/blackfin/include/asm/pgalloc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/pgalloc.h> diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h deleted file mode 100644 index 04bc4db..0000000 --- a/arch/blackfin/include/asm/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/resource.h> diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h deleted file mode 100644 index d177a15..0000000 --- a/arch/blackfin/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _BLACKFIN_SCATTERLIST_H -#define _BLACKFIN_SCATTERLIST_H - -#include <asm-generic/scatterlist.h> - -#endif /* !(_BLACKFIN_SCATTERLIST_H) */ diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index 14a3e66..fbd4084 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2009 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _BLACKFIN_SECTIONS_H #define _BLACKFIN_SECTIONS_H diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h deleted file mode 100644 index 7673b83..0000000 --- a/arch/blackfin/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sembuf.h> diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h deleted file mode 100644 index a0cb0caf..0000000 --- a/arch/blackfin/include/asm/serial.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/serial.h> diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h deleted file mode 100644 index 552df83..0000000 --- a/arch/blackfin/include/asm/setup.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/setup.h> diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h deleted file mode 100644 index 83c05fc..0000000 --- a/arch/blackfin/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/shmbuf.h> diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h deleted file mode 100644 index 93f30de..0000000 --- a/arch/blackfin/include/asm/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/shmparam.h> diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h index ce4081a..906bdc1 100644 --- a/arch/blackfin/include/asm/sigcontext.h +++ b/arch/blackfin/include/asm/sigcontext.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2008 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _ASM_BLACKFIN_SIGCONTEXT_H #define _ASM_BLACKFIN_SIGCONTEXT_H diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h deleted file mode 100644 index 6b71384..0000000 --- a/arch/blackfin/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/socket.h> diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h deleted file mode 100644 index def6d47..0000000 --- a/arch/blackfin/include/asm/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sockios.h> diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index 1f286e7..2336093 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -1,8 +1,8 @@ /* -Â * Copyright 2004-2009 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. -Â */ + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef __BFIN_SPINLOCK_H #define __BFIN_SPINLOCK_H diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h deleted file mode 100644 index 0b91fe1..0000000 --- a/arch/blackfin/include/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/statfs.h> diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h deleted file mode 100644 index 3935b10..0000000 --- a/arch/blackfin/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/termbits.h> diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h deleted file mode 100644 index 280d78a..0000000 --- a/arch/blackfin/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/termios.h> diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h deleted file mode 100644 index 5428f33..0000000 --- a/arch/blackfin/include/asm/topology.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/topology.h> diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h deleted file mode 100644 index b9e79bc..0000000 --- a/arch/blackfin/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/types.h> diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h deleted file mode 100644 index 9bc07b9..0000000 --- a/arch/blackfin/include/asm/ucontext.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ucontext.h> diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h deleted file mode 100644 index 6cecbbb..0000000 --- a/arch/blackfin/include/asm/unaligned.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/unaligned.h> diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h deleted file mode 100644 index 4792a60..0000000 --- a/arch/blackfin/include/asm/user.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/user.h> diff --git a/arch/blackfin/include/asm/xor.h b/arch/blackfin/include/asm/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/arch/blackfin/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/xor.h> diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index d550b24..b7bdc42 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o CFLAGS_REMOVE_ftrace.o = -pg +obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index bd32c09..17e3546 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c @@ -138,6 +138,16 @@ int main(void) DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault)); DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault)); #endif + + /* PDA initial management */ + DEFINE(PDA_INIT_RETX, offsetof(struct blackfin_initial_pda, retx)); +#ifdef CONFIG_DEBUG_DOUBLEFAULT + DEFINE(PDA_INIT_DF_DCPLB, offsetof(struct blackfin_initial_pda, dcplb_doublefault_addr)); + DEFINE(PDA_INIT_DF_ICPLB, offsetof(struct blackfin_initial_pda, icplb_doublefault_addr)); + DEFINE(PDA_INIT_DF_SEQSTAT, offsetof(struct blackfin_initial_pda, seqstat_doublefault)); + DEFINE(PDA_INIT_DF_RETX, offsetof(struct blackfin_initial_pda, retx_doublefault)); +#endif + #ifdef CONFIG_SMP /* Inter-core lock (in L2 SRAM) */ DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot)); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index bcf8cf6..02796b8 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -118,6 +118,9 @@ static struct str_ident { #if defined(CONFIG_PM) static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; +# ifdef BF538_FAMILY +static unsigned short port_fer_saved[3]; +# endif #endif static void gpio_error(unsigned gpio) @@ -604,6 +607,11 @@ void bfin_gpio_pm_hibernate_suspend(void) { int i, bank; +#ifdef BF538_FAMILY + for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i) + port_fer_saved[i] = *port_fer[i]; +#endif + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); @@ -625,6 +633,10 @@ void bfin_gpio_pm_hibernate_suspend(void) gpio_bank_saved[bank].maska = gpio_array[bank]->maska; } +#ifdef BFIN_SPECIAL_GPIO_BANKS + bfin_special_gpio_pm_hibernate_suspend(); +#endif + AWA_DUMMY_READ(maska); } @@ -632,6 +644,11 @@ void bfin_gpio_pm_hibernate_restore(void) { int i, bank; +#ifdef BF538_FAMILY + for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i) + *port_fer[i] = port_fer_saved[i]; +#endif + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); @@ -653,6 +670,11 @@ void bfin_gpio_pm_hibernate_restore(void) gpio_array[bank]->both = gpio_bank_saved[bank].both; gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } + +#ifdef BFIN_SPECIAL_GPIO_BANKS + bfin_special_gpio_pm_hibernate_restore(); +#endif + AWA_DUMMY_READ(maska); } @@ -691,9 +713,9 @@ void bfin_gpio_pm_hibernate_restore(void) gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + & gpio_bank_saved[bank].dir; + gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; } } #endif diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index fce4807..92f6648 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -27,7 +27,7 @@ #define PORT_MUX BFIN_PORT_MUX #endif -#define _d(name, bits, addr, perms) debugfs_create_x##bits(name, perms, parent, (u##bits *)addr) +#define _d(name, bits, addr, perms) debugfs_create_x##bits(name, perms, parent, (u##bits *)(addr)) #define d(name, bits, addr) _d(name, bits, addr, S_IRUSR|S_IWUSR) #define d_RO(name, bits, addr) _d(name, bits, addr, S_IRUSR) #define d_WO(name, bits, addr) _d(name, bits, addr, S_IWUSR) @@ -223,7 +223,8 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm __DMA(CURR_DESC_PTR, curr_desc_ptr); __DMA(CURR_ADDR, curr_addr); __DMA(IRQ_STATUS, irq_status); - __DMA(PERIPHERAL_MAP, peripheral_map); + if (strcmp(pfx, "IMDMA") != 0) + __DMA(PERIPHERAL_MAP, peripheral_map); __DMA(CURR_X_COUNT, curr_x_count); __DMA(CURR_Y_COUNT, curr_y_count); } @@ -277,6 +278,32 @@ bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num) } #define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num) +#define GPTIMER_GROUP_OFF(mmr) REGS_OFF(gptimer_group, mmr) +#define __GPTIMER_GROUP(uname, lname) __REGS(gptimer_group, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_gptimer_group(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf; + + if (num == -1) { + _buf = buf + sprintf(buf, "TIMER_"); + __GPTIMER_GROUP(ENABLE, enable); + __GPTIMER_GROUP(DISABLE, disable); + __GPTIMER_GROUP(STATUS, status); + } else { + /* These MMRs are a bit odd as the group # is a suffix */ + _buf = buf + sprintf(buf, "TIMER_ENABLE%i", num); + d(buf, 16, base + GPTIMER_GROUP_OFF(enable)); + + _buf = buf + sprintf(buf, "TIMER_DISABLE%i", num); + d(buf, 16, base + GPTIMER_GROUP_OFF(disable)); + + _buf = buf + sprintf(buf, "TIMER_STATUS%i", num); + d(buf, 32, base + GPTIMER_GROUP_OFF(status)); + } +} +#define GPTIMER_GROUP(mmr, num) bfin_debug_mmrs_gptimer_group(parent, mmr, num) + /* * Handshake MDMA */ @@ -296,6 +323,29 @@ bfin_debug_mmrs_hmdma(struct dentry *parent, unsigned long base, int num) #define HMDMA(num) bfin_debug_mmrs_hmdma(parent, HMDMA##num##_CONTROL, num) /* + * Peripheral Interrupts (PINT/GPIO) + */ +#ifdef PINT0_MASK_SET +#define __PINT(uname, lname) __REGS(pint, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_pint(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, PINT, num); + __PINT(MASK_SET, mask_set); + __PINT(MASK_CLEAR, mask_clear); + __PINT(REQUEST, request); + __PINT(ASSIGN, assign); + __PINT(EDGE_SET, edge_set); + __PINT(EDGE_CLEAR, edge_clear); + __PINT(INVERT_SET, invert_set); + __PINT(INVERT_CLEAR, invert_clear); + __PINT(PINSTATE, pinstate); + __PINT(LATCH, latch); +} +#define PINT(num) bfin_debug_mmrs_pint(parent, PINT##num##_MASK_SET, num) +#endif + +/* * Port/GPIO */ #define bfin_gpio_regs gpio_port_t @@ -747,7 +797,7 @@ static int __init bfin_debug_mmrs_init(void) #endif parent = debugfs_create_dir("dmac", top); -#ifdef DMA_TC_CNT +#ifdef DMAC_TC_CNT D16(DMAC_TC_CNT); D16(DMAC_TC_PER); #endif @@ -1005,29 +1055,19 @@ static int __init bfin_debug_mmrs_init(void) #endif parent = debugfs_create_dir("gptimer", top); -#ifdef TIMER_DISABLE - D16(TIMER_DISABLE); - D16(TIMER_ENABLE); - D32(TIMER_STATUS); +#ifdef TIMER_ENABLE + GPTIMER_GROUP(TIMER_ENABLE, -1); #endif -#ifdef TIMER_DISABLE0 - D16(TIMER_DISABLE0); - D16(TIMER_ENABLE0); - D32(TIMER_STATUS0); +#ifdef TIMER_ENABLE0 + GPTIMER_GROUP(TIMER_ENABLE0, 0); #endif -#ifdef TIMER_DISABLE1 - D16(TIMER_DISABLE1); - D16(TIMER_ENABLE1); - D32(TIMER_STATUS1); +#ifdef TIMER_ENABLE1 + GPTIMER_GROUP(TIMER_ENABLE1, 1); #endif /* XXX: Should convert BF561 MMR names */ #ifdef TMRS4_DISABLE - D16(TMRS4_DISABLE); - D16(TMRS4_ENABLE); - D32(TMRS4_STATUS); - D16(TMRS8_DISABLE); - D16(TMRS8_ENABLE); - D32(TMRS8_STATUS); + GPTIMER_GROUP(TMRS4_ENABLE, 0); + GPTIMER_GROUP(TMRS8_ENABLE, 1); #endif GPTIMER(0); GPTIMER(1); @@ -1253,6 +1293,14 @@ static int __init bfin_debug_mmrs_init(void) D32(OTP_DATA3); #endif +#ifdef PINT0_MASK_SET + parent = debugfs_create_dir("pint", top); + PINT(0); + PINT(1); + PINT(2); + PINT(3); +#endif + #ifdef PIXC_CTL parent = debugfs_create_dir("pixc", top); D16(PIXC_CTL); @@ -1816,7 +1864,6 @@ static int __init bfin_debug_mmrs_init(void) { int num; unsigned long base; - char *_buf, buf[32]; base = PORTA_FER; for (num = 0; num < 10; ++num) { @@ -1824,24 +1871,6 @@ static int __init bfin_debug_mmrs_init(void) base += sizeof(struct bfin_gpio_regs); } -#define __PINT(uname, lname) __REGS(pint, #uname, lname) - parent = debugfs_create_dir("pint", top); - base = PINT0_MASK_SET; - for (num = 0; num < 4; ++num) { - _buf = REGS_STR_PFX(buf, PINT, num); - __PINT(MASK_SET, mask_set); - __PINT(MASK_CLEAR, mask_clear); - __PINT(IRQ, irq); - __PINT(ASSIGN, assign); - __PINT(EDGE_SET, edge_set); - __PINT(EDGE_CLEAR, edge_clear); - __PINT(INVERT_SET, invert_set); - __PINT(INVERT_CLEAR, invert_clear); - __PINT(PINSTATE, pinstate); - __PINT(LATCH, latch); - base += sizeof(struct bfin_pint_regs); - } - } #endif /* BF54x */ diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 8b81dc0..06459f4 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -25,49 +25,33 @@ #define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1) -typedef struct { - uint16_t config; - uint16_t __pad; - uint32_t counter; - uint32_t period; - uint32_t width; -} GPTIMER_timer_regs; - -typedef struct { - uint16_t enable; - uint16_t __pad0; - uint16_t disable; - uint16_t __pad1; - uint32_t status; -} GPTIMER_group_regs; - -static volatile GPTIMER_timer_regs *const timer_regs[MAX_BLACKFIN_GPTIMERS] = +static struct bfin_gptimer_regs * const timer_regs[MAX_BLACKFIN_GPTIMERS] = { - (GPTIMER_timer_regs *)TIMER0_CONFIG, - (GPTIMER_timer_regs *)TIMER1_CONFIG, - (GPTIMER_timer_regs *)TIMER2_CONFIG, + (void *)TIMER0_CONFIG, + (void *)TIMER1_CONFIG, + (void *)TIMER2_CONFIG, #if (MAX_BLACKFIN_GPTIMERS > 3) - (GPTIMER_timer_regs *)TIMER3_CONFIG, - (GPTIMER_timer_regs *)TIMER4_CONFIG, - (GPTIMER_timer_regs *)TIMER5_CONFIG, - (GPTIMER_timer_regs *)TIMER6_CONFIG, - (GPTIMER_timer_regs *)TIMER7_CONFIG, + (void *)TIMER3_CONFIG, + (void *)TIMER4_CONFIG, + (void *)TIMER5_CONFIG, + (void *)TIMER6_CONFIG, + (void *)TIMER7_CONFIG, # if (MAX_BLACKFIN_GPTIMERS > 8) - (GPTIMER_timer_regs *)TIMER8_CONFIG, - (GPTIMER_timer_regs *)TIMER9_CONFIG, - (GPTIMER_timer_regs *)TIMER10_CONFIG, + (void *)TIMER8_CONFIG, + (void *)TIMER9_CONFIG, + (void *)TIMER10_CONFIG, # if (MAX_BLACKFIN_GPTIMERS > 11) - (GPTIMER_timer_regs *)TIMER11_CONFIG, + (void *)TIMER11_CONFIG, # endif # endif #endif }; -static volatile GPTIMER_group_regs *const group_regs[BFIN_TIMER_NUM_GROUP] = +static struct bfin_gptimer_group_regs * const group_regs[BFIN_TIMER_NUM_GROUP] = { - (GPTIMER_group_regs *)TIMER0_GROUP_REG, + (void *)TIMER0_GROUP_REG, #if (MAX_BLACKFIN_GPTIMERS > 8) - (GPTIMER_group_regs *)TIMER8_GROUP_REG, + (void *)TIMER8_GROUP_REG, #endif }; @@ -140,7 +124,7 @@ static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = void set_gptimer_pwidth(unsigned int timer_id, uint32_t value) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - timer_regs[timer_id]->width = value; + bfin_write(&timer_regs[timer_id]->width, value); SSYNC(); } EXPORT_SYMBOL(set_gptimer_pwidth); @@ -148,14 +132,14 @@ EXPORT_SYMBOL(set_gptimer_pwidth); uint32_t get_gptimer_pwidth(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return timer_regs[timer_id]->width; + return bfin_read(&timer_regs[timer_id]->width); } EXPORT_SYMBOL(get_gptimer_pwidth); void set_gptimer_period(unsigned int timer_id, uint32_t period) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - timer_regs[timer_id]->period = period; + bfin_write(&timer_regs[timer_id]->period, period); SSYNC(); } EXPORT_SYMBOL(set_gptimer_period); @@ -163,71 +147,76 @@ EXPORT_SYMBOL(set_gptimer_period); uint32_t get_gptimer_period(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return timer_regs[timer_id]->period; + return bfin_read(&timer_regs[timer_id]->period); } EXPORT_SYMBOL(get_gptimer_period); uint32_t get_gptimer_count(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return timer_regs[timer_id]->counter; + return bfin_read(&timer_regs[timer_id]->counter); } EXPORT_SYMBOL(get_gptimer_count); uint32_t get_gptimer_status(unsigned int group) { tassert(group < BFIN_TIMER_NUM_GROUP); - return group_regs[group]->status; + return bfin_read(&group_regs[group]->status); } EXPORT_SYMBOL(get_gptimer_status); void set_gptimer_status(unsigned int group, uint32_t value) { tassert(group < BFIN_TIMER_NUM_GROUP); - group_regs[group]->status = value; + bfin_write(&group_regs[group]->status, value); SSYNC(); } EXPORT_SYMBOL(set_gptimer_status); +static uint32_t read_gptimer_status(unsigned int timer_id) +{ + return bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status); +} + int get_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]); + return !!(read_gptimer_status(timer_id) & timil_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_intr); void clear_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id]; + bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, timil_mask[timer_id]); } EXPORT_SYMBOL(clear_gptimer_intr); int get_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]); + return !!(read_gptimer_status(timer_id) & tovf_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_over); void clear_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id]; + bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, tovf_mask[timer_id]); } EXPORT_SYMBOL(clear_gptimer_over); int get_gptimer_run(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]); + return !!(read_gptimer_status(timer_id) & trun_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_run); void set_gptimer_config(unsigned int timer_id, uint16_t config) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - timer_regs[timer_id]->config = config; + bfin_write(&timer_regs[timer_id]->config, config); SSYNC(); } EXPORT_SYMBOL(set_gptimer_config); @@ -235,7 +224,7 @@ EXPORT_SYMBOL(set_gptimer_config); uint16_t get_gptimer_config(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return timer_regs[timer_id]->config; + return bfin_read(&timer_regs[timer_id]->config); } EXPORT_SYMBOL(get_gptimer_config); @@ -244,7 +233,7 @@ void enable_gptimers(uint16_t mask) int i; tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0); for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) { - group_regs[i]->enable = mask & 0xFF; + bfin_write(&group_regs[i]->enable, mask & 0xFF); mask >>= 8; } SSYNC(); @@ -257,7 +246,7 @@ static void _disable_gptimers(uint16_t mask) uint16_t m = mask; tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0); for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) { - group_regs[i]->disable = m & 0xFF; + bfin_write(&group_regs[i]->disable, m & 0xFF); m >>= 8; } } @@ -268,7 +257,7 @@ void disable_gptimers(uint16_t mask) _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) - group_regs[BFIN_TIMER_OCTET(i)]->status = trun_mask[i]; + bfin_write(&group_regs[BFIN_TIMER_OCTET(i)]->status, trun_mask[i]); SSYNC(); } EXPORT_SYMBOL(disable_gptimers); @@ -283,7 +272,7 @@ EXPORT_SYMBOL(disable_gptimers_sync); void set_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - timer_regs[timer_id]->config |= TIMER_PULSE_HI; + bfin_write_or(&timer_regs[timer_id]->config, TIMER_PULSE_HI); SSYNC(); } EXPORT_SYMBOL(set_gptimer_pulse_hi); @@ -291,7 +280,7 @@ EXPORT_SYMBOL(set_gptimer_pulse_hi); void clear_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - timer_regs[timer_id]->config &= ~TIMER_PULSE_HI; + bfin_write_and(&timer_regs[timer_id]->config, ~TIMER_PULSE_HI); SSYNC(); } EXPORT_SYMBOL(clear_gptimer_pulse_hi); @@ -301,7 +290,7 @@ uint16_t get_enabled_gptimers(void) int i; uint16_t result = 0; for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) - result |= (group_regs[i]->enable << (i << 3)); + result |= (bfin_read(&group_regs[i]->enable) << (i << 3)); return result; } EXPORT_SYMBOL(get_enabled_gptimers); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6a660fa..6a80a9e 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -140,7 +140,6 @@ EXPORT_SYMBOL(kernel_thread); */ void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) { - set_fs(USER_DS); regs->pc = new_ip; if (current->mm) regs->p5 = current->mm->start_data; diff --git a/arch/blackfin/kernel/pwm.c b/arch/blackfin/kernel/pwm.c new file mode 100644 index 0000000..33f5942 --- /dev/null +++ b/arch/blackfin/kernel/pwm.c @@ -0,0 +1,100 @@ +/* + * Blackfin Pulse Width Modulation (PWM) core + * + * Copyright (c) 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +#include <asm/gptimers.h> +#include <asm/portmux.h> + +struct pwm_device { + unsigned id; + unsigned short pin; +}; + +static const unsigned short pwm_to_gptimer_per[] = { + P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5, + P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11, +}; + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int ret; + + /* XXX: pwm_id really should be unsigned */ + if (pwm_id < 0) + return NULL; + + pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); + if (!pwm) + return pwm; + + pwm->id = pwm_id; + if (pwm->id >= ARRAY_SIZE(pwm_to_gptimer_per)) + goto err; + + pwm->pin = pwm_to_gptimer_per[pwm->id]; + ret = peripheral_request(pwm->pin, label); + if (ret) + goto err; + + return pwm; + err: + kfree(pwm); + return NULL; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + peripheral_free(pwm->pin); + kfree(pwm); +} +EXPORT_SYMBOL(pwm_free); + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long period, duty; + unsigned long long val; + + if (duty_ns < 0 || duty_ns > period_ns) + return -EINVAL; + + val = (unsigned long long)get_sclk() * period_ns; + do_div(val, NSEC_PER_SEC); + period = val; + + val = (unsigned long long)period * duty_ns; + do_div(val, period_ns); + duty = period - val; + + if (duty >= period) + duty = period - 1; + + set_gptimer_config(pwm->id, TIMER_MODE_PWM | TIMER_PERIOD_CNT); + set_gptimer_pwidth(pwm->id, duty); + set_gptimer_period(pwm->id, period); + + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + enable_gptimer(pwm->id); + return 0; +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + disable_gptimer(pwm->id); +} +EXPORT_SYMBOL(pwm_disable); diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index 488bdc5..c4c0081 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -54,7 +54,9 @@ static void bfin_reset(void) /* The BF526 ROM will crash during reset */ #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) - bfin_read_SWRST(); + /* Seems to be fixed with newer parts though ... */ + if (__SILICON_REVISION__ < 1 && bfin_revid() < 1) + bfin_read_SWRST(); #endif /* Wait for the SWRST write to complete. Cannot rely on SSYNC diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 536bd9d..dfa2525 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -54,8 +54,7 @@ EXPORT_SYMBOL(mtd_size); #endif char __initdata command_line[COMMAND_LINE_SIZE]; -void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat, - *init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr; +struct blackfin_initial_pda __initdata initial_pda; /* boot memmap, for parsing "memmap=" */ #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ @@ -957,13 +956,16 @@ void __init setup_arch(char **cmdline_p) printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT /* We assume the crashing kernel, and the current symbol table match */ - printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n", - (int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx); - printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr); - printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr); + printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n", + initial_pda.seqstat_doublefault & SEQSTAT_EXCAUSE, + initial_pda.retx_doublefault); + printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", + initial_pda.dcplb_doublefault_addr); + printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", + initial_pda.icplb_doublefault_addr); #endif printk(KERN_NOTICE " The instruction at %pF caused a double exception\n", - init_retx); + initial_pda.retx); } else if (_bfin_swrst & RESET_WDOG) printk(KERN_INFO "Recovering from Watchdog event\n"); else if (_bfin_swrst & RESET_SOFTWARE) diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 8d73724..ceb2bf6 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -51,7 +51,7 @@ void __init setup_core_timer(void) u32 tcount; /* power up the timer, but don't enable it just yet */ - bfin_write_TCNTL(1); + bfin_write_TCNTL(TMPWR); CSYNC(); /* the TSCALE prescaler counter */ @@ -64,7 +64,7 @@ void __init setup_core_timer(void) /* now enable the timer */ CSYNC(); - bfin_write_TCNTL(7); + bfin_write_TCNTL(TAUTORLD | TMREN | TMPWR); } #endif diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 3ac5b66..ba35864 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -155,6 +155,7 @@ SECTIONS SECURITY_INITCALL INIT_RAM_FS + . = ALIGN(PAGE_SIZE); ___per_cpu_load = .; PERCPU_INPUT(32) diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index 1d9f631..bde92a1 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -11,55 +11,75 @@ menu "BF518 Specific Configuration" comment "Alternative Multiplexing Scheme" choice - prompt "SPORT0" - default BF518_SPORT0_PORTG + prompt "PWM Channel Pins" + default BF518_PWM_ALL_PORTF help - Select PORT used for SPORT0. See Hardware Reference Manual + Select pins used for the PWM channels: + PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL -config BF518_SPORT0_PORTF - bool "PORT F" + See the Hardware Reference Manual for more details. + +config BF518_PWM_ALL_PORTF + bool "PF1 - PF6" help - PORT F + PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL} -config BF518_SPORT0_PORTG - bool "PORT G" +config BF518_PWM_PORTF_PORTG + bool "PF11 - PF14 / PG1 - PG2" help - PORT G + PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL} + PG{1,2} <-> PWM_{CH,CL} + endchoice choice - prompt "SPORT0 TSCLK Location" - depends on BF518_SPORT0_PORTG - default BF518_SPORT0_TSCLK_PG10 + prompt "PWM Sync Pin" + default BF518_PWM_SYNC_PF7 help - Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual + Select the pin used for PWM_SYNC. -config BF518_SPORT0_TSCLK_PG10 - bool "PORT PG10" - help - PORT PG10 + See the Hardware Reference Manual for more details. + +config BF518_PWM_SYNC_PF7 + bool "PF7" +config BF518_PWM_SYNC_PF15 + bool "PF15" +endchoice -config BF518_SPORT0_TSCLK_PG14 - bool "PORT PG14" +choice + prompt "PWM Trip B Pin" + default BF518_PWM_TRIPB_PG10 help - PORT PG14 + Select the pin used for PWM_TRIPB. + + See the Hardware Reference Manual for more details. + +config BF518_PWM_TRIPB_PG10 + bool "PG10" +config BF518_PWM_TRIPB_PG14 + bool "PG14" endchoice choice - prompt "UART1" - default BF518_UART1_PORTF + prompt "PPI / Timer Pins" + default BF518_PPI_TMR_PG5 help - Select PORT used for UART1. See Hardware Reference Manual + Select pins used for PPI/Timer: + PPICLK PPIFS1 PPIFS2 + TMRCLK TMR0 TMR1 -config BF518_UART1_PORTF - bool "PORT F" + See the Hardware Reference Manual for more details. + +config BF518_PPI_TMR_PG5 + bool "PG5 - PG7" help - PORT F + PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} -config BF518_UART1_PORTG - bool "PORT G" +config BF518_PPI_TMR_PG12 + bool "PG12 - PG14" help - PORT G + PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} + endchoice comment "Hysteresis/Schmitt Trigger Control" diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index c0ccadc..d78fc2c 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -187,43 +187,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) -/* SPI SWITCH CHIP */ -static struct bfin5xx_spi_chip spi_switch_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif -#endif - #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -239,21 +212,6 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -269,18 +227,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) @@ -290,7 +236,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 1, .platform_data = NULL, - .controller_data = &spi_switch_info, .mode = SPI_MODE_3, }, #endif @@ -314,7 +259,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ @@ -324,7 +268,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, .mode = SPI_MODE_0, }, #endif @@ -334,7 +277,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -343,7 +285,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 50fc5c8..55c1279 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -138,32 +138,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -179,21 +163,6 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -209,18 +178,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", @@ -239,7 +196,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ @@ -249,7 +205,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, .mode = SPI_MODE_0, }, #endif @@ -259,7 +214,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -268,7 +222,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index d2f076f..56383f7 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -11,10 +11,9 @@ */ /* This file should be up to date with: - * - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ -/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ #if __SILICON_REVISION__ < 0 # error will not work on BF518 silicon version #endif @@ -77,19 +76,29 @@ /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ -#define ANOMALY_05000462 (1) -/* PLL Latches Incorrect Settings During Reset */ -#define ANOMALY_05000469 (1) +#define ANOMALY_05000462 (__SILICON_REVISION__ < 2) /* Incorrect Default MSEL Value in PLL_CTL */ -#define ANOMALY_05000472 (1) +#define ANOMALY_05000472 (__SILICON_REVISION__ < 2) /* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000482 (__SILICON_REVISION__ < 2) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (__SILICON_REVISION__ < 2) +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -157,6 +166,5 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) #define ANOMALY_05000480 (0) -#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index cd84a56..b3b806f 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -81,9 +81,15 @@ #define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#ifndef CONFIG_BF518_PPI_TMR_PG12 +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#else #define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) #define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#endif #define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) /* SPI Port Mux */ @@ -139,9 +145,15 @@ #define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1)) /* Timer */ +#ifndef CONFIG_BF518_PPI_TMR_PG12 #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2)) #define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) #define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#else +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#endif #define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) #define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) #define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(2)) @@ -158,23 +170,33 @@ #define P_TWI0_SDA (P_DONTCARE) /* PWM */ -#define P_PWM0_AH (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) -#define P_PWM0_AL (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) -#define P_PWM0_BH (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) -#define P_PWM0_BL (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) -#define P_PWM0_CH (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) -#define P_PWM0_CL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) -#define P_PWM0_SYNC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) - -#define P_PWM1_AH (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2)) -#define P_PWM1_AL (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) -#define P_PWM1_BH (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) -#define P_PWM1_BL (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) -#define P_PWM1_CH (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) -#define P_PWM1_CL (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) -#define P_PWM1_SYNC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) - +#ifndef CONFIG_BF518_PWM_PORTF_PORTG +#define P_PWM_AH (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_PWM_AL (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_PWM_BH (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_PWM_BL (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_PWM_CH (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_PWM_CL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#else +#define P_PWM_AH (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2)) +#define P_PWM_AL (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_PWM_BH (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) +#define P_PWM_BL (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_PWM_CH (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_PWM_CL (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#endif + +#ifndef CONFIG_BF518_PWM_SYNC_PF15 +#define P_PWM_SYNC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) +#else +#define P_PWM_SYNC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) +#endif + +#ifndef CONFIG_BF518_PWM_TRIPB_PG14 +#define P_PWM_TRIPB (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2)) +#else #define P_PWM_TRIPB (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#endif /* RSI */ #define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index ccab4c6..c04df43 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -265,29 +265,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -328,7 +311,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -347,7 +329,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index c9d6dc8..6400341 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -354,40 +354,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -403,21 +379,6 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -433,18 +394,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { @@ -452,7 +401,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -473,7 +421,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ @@ -483,7 +430,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, .mode = SPI_MODE_0, }, #endif @@ -493,7 +439,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index b7101aa..6dbb1b4 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -253,32 +253,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (sst25wf040) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -311,35 +295,6 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -355,18 +310,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", @@ -385,7 +328,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) @@ -396,7 +338,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -407,7 +348,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, .mode = SPI_MODE_0, }, #endif @@ -417,7 +357,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -426,7 +365,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index e67ac77..4e9dc9c 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -409,6 +409,9 @@ static struct resource net2272_bfin_resources[] = { .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -448,40 +451,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -513,20 +492,6 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) @@ -574,9 +539,25 @@ static struct resource bfin_snd_resources[][4] = { BFIN_SND_RES(0), BFIN_SND_RES(1), }; +#endif -static struct platform_device bfin_pcm = { - .name = "bfin-pcm-audio", +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm_pcm = { + .name = "bfin-tdm-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif @@ -605,13 +586,6 @@ static struct platform_device bfin_tdm = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -627,18 +601,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { @@ -647,7 +609,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, .platform_data = "ad1836", - .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -670,7 +631,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) @@ -681,7 +641,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 3, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -691,7 +650,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -700,7 +658,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 7, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -1276,9 +1233,16 @@ static struct platform_device *stamp_devices[] __initdata = { &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_pcm, +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97_pcm, #endif #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 18d303d..ec4bc74 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -314,29 +314,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -/* - * tll6527m V1.0 does not support native spi slave selects - * hence DMA mode will not be useful since the ADC needs - * CS to toggle for each sample and cs_change_per_word - * seems to be removed from spi_bfin5xx.c - */ - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -359,21 +342,6 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", @@ -382,24 +350,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) -static struct bfin5xx_spi_chip spi_mcp23s08_sys_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; - -static struct bfin5xx_spi_chip spi_mcp23s08_usr_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; - #include <linux/spi/mcp23s08.h> static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = { .chip[0].is_present = true, @@ -429,22 +380,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", - /* Name of spi_driver for this device */ - .max_speed_hz = 10000000, - /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS, - /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - .mode = SPI_MODE_0, - }, -#endif - #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", @@ -470,7 +405,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = EXP_GPIO_SPISEL_BASE + 0x07 + MAX_CTRL_CS, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -482,7 +416,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = EXP_GPIO_SPISEL_BASE + 0x03 + MAX_CTRL_CS, .mode = SPI_CPHA | SPI_CPOL, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -491,7 +424,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, .bus_num = 0, .chip_select = EXP_GPIO_SPISEL_BASE + 0x06 + MAX_CTRL_CS, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -502,7 +434,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = EXP_GPIO_SPISEL_BASE + 0x01 + MAX_CTRL_CS, - .controller_data = &spi_mcp23s08_sys_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, { @@ -511,7 +442,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = EXP_GPIO_SPISEL_BASE + 0x02 + MAX_CTRL_CS, - .controller_data = &spi_mcp23s08_usr_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index e66a7e8..6884706 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -11,8 +11,8 @@ */ /* This file should be up to date with: - * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -57,7 +57,7 @@ /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (_ANOMALY_BF527(< 2)) /* Host DMA Boot Modes Are Not Functional */ -#define ANOMALY_05000330 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000330 (_ANOMALY_BF527(< 2)) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ #define ANOMALY_05000337 (_ANOMALY_BF527(< 2)) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ @@ -135,7 +135,7 @@ /* Incorrect Default Internal Voltage Regulator Setting */ #define ANOMALY_05000410 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ -#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2)) +#define ANOMALY_05000411 (_ANOMALY_BF526(< 1)) /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ #define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2)) /* DEB2_URGENT Bit Not Functional */ @@ -181,11 +181,11 @@ /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ -#define ANOMALY_05000445 (1) -/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0)) +/* USB DMA Short Packet Data Corruption */ #define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ -#define ANOMALY_05000451 (1) +#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0)) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ #define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ @@ -198,19 +198,19 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* USB Rx DMA hang */ +/* USB Rx DMA Hang */ #define ANOMALY_05000465 (1) /* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ #define ANOMALY_05000466 (1) -/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) /* Incorrect Default MSEL Value in PLL_CTL */ #define ANOMALY_05000472 (_ANOMALY_BF526(>= 0)) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) @@ -219,11 +219,19 @@ /* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ #define ANOMALY_05000483 (1) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ -#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0)) /* The CODEC Zero-Cross Detect Feature is not Functional */ #define ANOMALY_05000487 (1) -/* IFLUSH sucks at life */ +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index d4bfcea..eb325ed 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -159,22 +159,6 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif @@ -195,24 +179,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */ - .bus_num = 1, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 16, .bus_num = 1, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 87b5af3..b0ec825 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -102,21 +102,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -151,7 +142,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 7, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 4d5604e..14f54a3 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -59,29 +59,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -/* SPI ADC chip */ -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -99,24 +82,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 2, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index b67b91d..ecd2801 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -210,29 +210,6 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -250,24 +227,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -276,7 +241,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index a377d8a..fbee77f 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -110,7 +110,6 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* if 1 - block!!! */ - .bits_per_word = 8, }; #endif diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 43224ef..964a8e5 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -80,6 +80,9 @@ static struct resource net2272_bfin_resources[] = { .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { .start = IRQ_PF10, .end = IRQ_PF10, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -172,29 +175,6 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -221,7 +201,6 @@ static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, .pio_interrupt = 0, }; #endif @@ -240,17 +219,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", @@ -258,7 +226,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, .platform_data = "ad1836", /* only includes chip name for the moment */ - .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -269,7 +236,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -659,6 +625,41 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */ + ret = gpio_request(GPIO_PF0, "net2272"); + if (ret) + return ret; + + ret = gpio_request(GPIO_PF1, "net2272"); + if (ret) { + gpio_free(GPIO_PF0); + return ret; + } + + ret = gpio_request(GPIO_PF11, "net2272"); + if (ret) { + gpio_free(GPIO_PF0); + gpio_free(GPIO_PF1); + return ret; + } + + gpio_direction_output(GPIO_PF0, 0); + gpio_direction_output(GPIO_PF1, 1); + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF11, 0); + mdelay(2); + gpio_set_value(GPIO_PF11, 1); +#endif + + return 0; +} + static int __init stamp_init(void) { int ret; @@ -685,6 +686,9 @@ static int __init stamp_init(void) } #endif + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 72aa594..03f2b40 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision F, 05/25/2010; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -152,7 +152,7 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 6) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 6) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 6) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 6) @@ -210,18 +210,25 @@ #define ANOMALY_05000462 (1) /* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ #define ANOMALY_05000471 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) -/* These anomalies have been "phased" out of analog.com anomaly sheets and are +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index d582b81..44fd840 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -61,29 +61,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -101,24 +84,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif @@ -766,6 +737,24 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PG14, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PG14 */ + gpio_direction_output(GPIO_PG14, 0); + mdelay(2); + gpio_set_value(GPIO_PG14, 1); +#endif + + return 0; +} + static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -777,6 +766,10 @@ static int __init cm_bf537e_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index cbb8098..1b4ac5c 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -62,29 +62,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -102,24 +85,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif @@ -731,6 +702,36 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PH15, driver_name); + if (ret) + return ret; + + ret = gpio_request(GPIO_PH13, "net2272"); + if (ret) { + gpio_free(GPIO_PH15); + return ret; + } + + /* Set PH15 Low make /AMS2 work properly */ + gpio_direction_output(GPIO_PH15, 0); + + /* enable CLKBUF output */ + bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PH13, 0); + mdelay(2); + gpio_set_value(GPIO_PH13, 1); +#endif + + return 0; +} + static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -742,6 +743,10 @@ static int __init cm_bf537u_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 6b4ff46..8bc951d 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -130,7 +130,6 @@ static struct platform_device asmb_flash_device = { static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* use no dma transfer with this chip*/ - .bits_per_word = 8, }; #endif @@ -161,7 +160,6 @@ static struct flash_platform_data bfin_spi_dataflash_data = { static struct bfin5xx_spi_chip spi_dataflash_chip_info = { .enable_dma = 0, /* use no dma transfer with this chip*/ - .bits_per_word = 8, }; #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index bfb3671..c62f9dc 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -159,14 +159,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 9389f03..3b8151d 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -184,40 +184,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -248,18 +224,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { @@ -267,7 +231,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -288,7 +251,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_ad7877_chip_info, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 76db1d4..b52e672 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -367,6 +367,9 @@ static struct resource net2272_bfin_resources[] = { .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -533,49 +536,11 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) -static struct bfin5xx_spi_chip ad1938_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) \ - || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE) -static struct bfin5xx_spi_chip adav801_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) #include <linux/input/ad714x.h> -static struct bfin5xx_spi_chip ad7147_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { { @@ -685,7 +650,6 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 16, }; #endif @@ -697,7 +661,6 @@ static unsigned short ad2s120x_platform_data[] = { static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 16, }; #endif @@ -714,14 +677,12 @@ static unsigned short ad2s1210_platform_data[] = { static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) static struct bfin5xx_spi_chip ad7314_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 16, }; #endif @@ -735,7 +696,6 @@ static unsigned short ad7816_platform_data[] = { static struct bfin5xx_spi_chip ad7816_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -749,7 +709,6 @@ static unsigned long adt7310_platform_data[3] = { static struct bfin5xx_spi_chip adt7310_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -758,11 +717,6 @@ static unsigned short ad7298_platform_data[] = { GPIO_PF7, /* busy_pin */ 0, }; - -static struct bfin5xx_spi_chip ad7298_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; #endif #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) @@ -773,7 +727,6 @@ static unsigned long adt7316_spi_data[2] = { static struct bfin5xx_spi_chip adt7316_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -800,18 +753,12 @@ static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, .pio_interrupt = 0, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #include <linux/spi/ad7877.h> -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -883,39 +830,13 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { .enable_dma = 1, - .bits_per_word = 8, }; #endif #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) -static struct bfin5xx_spi_chip adf7021_spi_chip_info = { - .bits_per_word = 16, -}; - #include <linux/spi/adf702x.h> #define TXREG 0x0160A470 static const u32 adf7021_regs[] = { @@ -959,10 +880,6 @@ static inline void adf702x_mac_init(void) {} #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) #include <linux/spi/ads7846.h> -static struct bfin5xx_spi_chip ad7873_spi_chip_info = { - .bits_per_word = 8, -}; - static int ads7873_get_pendown_state(void) { return gpio_get_value(GPIO_PF6); @@ -1009,21 +926,12 @@ static struct flash_platform_data bfin_spi_dataflash_data = { /* DataFlash chip */ static struct bfin5xx_spi_chip data_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) -static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE) static struct bfin5xx_spi_chip spi_ad7476_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif @@ -1053,17 +961,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) @@ -1073,7 +970,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, .platform_data = "ad1836", /* only includes chip name for the moment */ - .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -1084,7 +980,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &ad1938_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -1095,7 +990,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &adav801_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -1109,7 +1003,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 5, .mode = SPI_MODE_3, .platform_data = &ad7147_spi_platform_data, - .controller_data = &ad7147_spi_chip_info, }, #endif @@ -1188,7 +1081,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, /* CS, change it for your board */ .platform_data = ad7298_platform_data, - .controller_data = &ad7298_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -1225,7 +1117,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) @@ -1236,7 +1127,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -1246,7 +1136,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -1255,7 +1144,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -1278,7 +1166,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_adxl34x_chip_info, .mode = SPI_MODE_3, }, #endif @@ -1288,7 +1175,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ - .controller_data = &adf7021_spi_chip_info, .platform_data = &adf7021_platform_data, .mode = SPI_MODE_0, }, @@ -1300,7 +1186,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .irq = IRQ_PF6, .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ - .controller_data = &ad7873_spi_chip_info, .platform_data = &ad7873_pdata, .mode = SPI_MODE_0, }, @@ -2632,9 +2517,25 @@ static struct resource bfin_snd_resources[][4] = { BFIN_SND_RES(0), BFIN_SND_RES(1), }; +#endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif -static struct platform_device bfin_pcm = { - .name = "bfin-pcm-audio", +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm_pcm = { + .name = "bfin-tdm-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif @@ -2869,10 +2770,16 @@ static struct platform_device *stamp_devices[] __initdata = { &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_pcm, +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97_pcm, #endif #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) @@ -2916,6 +2823,24 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF6, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF6, 0); + mdelay(2); + gpio_set_value(GPIO_PF6, 1); +#endif + + return 0; +} + static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -2926,6 +2851,9 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_i2c_board_info)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 164a7e0..9b7287a 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -62,29 +62,12 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -102,24 +85,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif @@ -733,6 +704,24 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PG14, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PG14 */ + gpio_direction_output(GPIO_PG14, 0); + mdelay(2); + gpio_set_value(GPIO_PG14, 1); +#endif + + return 0; +} + static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -744,6 +733,10 @@ static int __init tcm_bf537_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 7f8e5a9..543cd3f 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision E, 05/25/2010; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -44,18 +44,12 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ -#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) -/* Instruction Cache Is Not Functional */ -#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Buffered CLKIN Output Is Disabled by Default */ -#define ANOMALY_05000247 (1) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) /* EMAC TX DMA Error After an Early Frame Abort */ @@ -98,7 +92,7 @@ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) /* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) @@ -162,9 +156,9 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) @@ -172,8 +166,26 @@ #define ANOMALY_05000480 (__SILICON_REVISION__ < 3) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* Instruction Cache Is Not Functional */ +#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) +/* Buffered CLKIN Output Is Disabled by Default */ +#define ANOMALY_05000247 (__SILICON_REVISION__ < 2) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index e61424e..629f3c3 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -502,7 +502,6 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif @@ -523,13 +522,6 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #include <asm/bfin-lq035q1.h> @@ -559,20 +551,6 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bf538_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -595,7 +573,6 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -605,7 +582,6 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif @@ -615,7 +591,6 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c index 180b125..471a9b1 100644 --- a/arch/blackfin/mach-bf538/ext-gpio.c +++ b/arch/blackfin/mach-bf538/ext-gpio.c @@ -1,7 +1,7 @@ /* * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -121,3 +121,38 @@ static int __init bf538_extgpio_setup(void) gpiochip_add(&bf538_porte_chip); } arch_initcall(bf538_extgpio_setup); + +#ifdef CONFIG_PM +static struct { + u16 data, dir, inen; +} gpio_bank_saved[3]; + +static void __iomem * const port_bases[3] = { + (void *)PORTCIO, + (void *)PORTDIO, + (void *)PORTEIO, +}; + +void bfin_special_gpio_pm_hibernate_suspend(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port_bases); ++i) { + gpio_bank_saved[i].data = read_PORTIO(port_bases[i]); + gpio_bank_saved[i].inen = read_PORTIO_INEN(port_bases[i]); + gpio_bank_saved[i].dir = read_PORTIO_DIR(port_bases[i]); + } +} + +void bfin_special_gpio_pm_hibernate_restore(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port_bases); ++i) { + write_PORTIO_INEN(port_bases[i], gpio_bank_saved[i].inen); + write_PORTIO_SET(port_bases[i], + gpio_bank_saved[i].data & gpio_bank_saved[i].dir); + write_PORTIO_DIR(port_bases[i], gpio_bank_saved[i].dir); + } +} +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 55e7d07..b6ca997 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -11,8 +11,8 @@ */ /* This file should be up to date with: - * - Revision I, 05/25/2010; ADSP-BF538/BF538F Blackfin Processor Anomaly List - * - Revision N, 05/25/2010; ADSP-BF539/BF539F Blackfin Processor Anomaly List + * - Revision J, 05/23/2011; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision O, 05/23/2011; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -56,25 +56,21 @@ #define ANOMALY_05000229 (1) /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ #define ANOMALY_05000233 (1) -/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ -#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (1) -/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ -#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 4) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ -#define ANOMALY_05000272 (1) +#define ANOMALY_05000272 (ANOMALY_BF538) /* Writes to Synchronous SDRAM Memory May Be Lost */ #define ANOMALY_05000273 (__SILICON_REVISION__ < 4) /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ #define ANOMALY_05000277 (__SILICON_REVISION__ < 4) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 4) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 4) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 4) @@ -102,8 +98,10 @@ #define ANOMALY_05000313 (__SILICON_REVISION__ < 4) /* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 4) +/* PFx Glitch on Write to PORTFIO or PORTFIO_TOGGLE */ +#define ANOMALY_05000317 (__SILICON_REVISION__ < 4) /* XXX: Same as 05000318 */ /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ -#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4) +#define ANOMALY_05000318 (__SILICON_REVISION__ < 4) /* XXX: Same as 05000317 */ /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (__SILICON_REVISION__ < 5) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -134,16 +132,32 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h index 8a5beee..3561c7d 100644 --- a/arch/blackfin/mach-bf538/include/mach/gpio.h +++ b/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -8,7 +8,10 @@ #define _MACH_GPIO_H_ #define MAX_BLACKFIN_GPIOS 16 +#ifdef CONFIG_GPIOLIB +/* We only use the special logic with GPIOLIB devices */ #define BFIN_SPECIAL_GPIO_BANKS 3 +#endif #define GPIO_PF0 0 /* PF */ #define GPIO_PF1 1 diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index d11502a..212b9e0 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -861,16 +861,10 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -886,13 +880,6 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bf54x_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -915,7 +902,6 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -924,7 +910,6 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 311bf99..cd9cbb6 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -1018,24 +1018,10 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1051,20 +1037,6 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) -static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1086,7 +1058,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) @@ -1097,7 +1068,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1106,7 +1076,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) @@ -1117,7 +1086,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, .chip_select = 2, - .controller_data = &spi_adxl34x_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 9e70785..ac96ee8 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision J, 06/03/2010; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision K, 05/23/2011; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -29,117 +29,37 @@ /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ -#define ANOMALY_05000220 (1) +#define ANOMALY_05000220 (__SILICON_REVISION__ < 4) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception when ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) -/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ -#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) -/* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) /* FIFO Boot Mode Not Functional */ #define ANOMALY_05000325 (__SILICON_REVISION__ < 2) -/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ -#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) -/* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) -/* Synchronous Burst Flash Boot Mode Is Not Functional */ -#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) -/* Host DMA Boot Modes Are Not Functional */ -#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) -/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ -#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) -/* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) -/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ -#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) -/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) -/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ -#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) -/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ -#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) -/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ -#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) -/* USB Calibration Value Is Not Initialized */ -#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) -/* USB Calibration Value to use */ -#define ANOMALY_05000346_value 0x5411 -/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) -/* Data Lost when Core Reads SDH Data FIFO */ -#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) -/* PLL Status Register Is Inaccurate */ -#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) /* bfrom_SysControl() Firmware Function Performs Improper System Reset */ /* * Note: anomaly sheet says this is fixed with bf54x-0.2+, but testing * shows that the fix itself does not cover all cases. */ #define ANOMALY_05000353 (1) -/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ -#define ANOMALY_05000355 (__SILICON_REVISION__ < 1) -/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */ -#define ANOMALY_05000356 (__SILICON_REVISION__ < 1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) /* External Memory Read Access Hangs Core With PLL Bypass */ #define ANOMALY_05000360 (1) /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ #define ANOMALY_05000365 (1) -/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */ -#define ANOMALY_05000367 (__SILICON_REVISION__ < 1) /* Addressing Conflict between Boot ROM and Asynchronous Memory */ #define ANOMALY_05000369 (1) -/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */ -#define ANOMALY_05000370 (__SILICON_REVISION__ < 1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) -/* USB DP/DM Data Pins May Lose State When Entering Hibernate */ -#define ANOMALY_05000372 (__SILICON_REVISION__ < 1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ #define ANOMALY_05000379 (1) -/* 8-Bit NAND Flash Boot Mode Not Functional */ -#define ANOMALY_05000382 (__SILICON_REVISION__ < 1) -/* Some ATAPI Modes Are Not Functional */ -#define ANOMALY_05000383 (1) -/* Boot from OTP Memory Not Functional */ -#define ANOMALY_05000385 (__SILICON_REVISION__ < 1) -/* bfrom_SysControl() Firmware Routine Not Functional */ -#define ANOMALY_05000386 (__SILICON_REVISION__ < 1) -/* Programmable Preboot Settings Not Functional */ -#define ANOMALY_05000387 (__SILICON_REVISION__ < 1) -/* CRC32 Checksum Support Not Functional */ -#define ANOMALY_05000388 (__SILICON_REVISION__ < 1) -/* Reset Vector Must Not Be in SDRAM Memory Space */ -#define ANOMALY_05000389 (__SILICON_REVISION__ < 1) -/* Changed Meaning of BCODE Field in SYSCR Register */ -#define ANOMALY_05000390 (__SILICON_REVISION__ < 1) -/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */ -#define ANOMALY_05000391 (__SILICON_REVISION__ < 1) -/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000392 (__SILICON_REVISION__ < 1) -/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000393 (__SILICON_REVISION__ < 1) -/* Log Buffer Not Functional */ -#define ANOMALY_05000394 (__SILICON_REVISION__ < 1) -/* Hook Routine Not Functional */ -#define ANOMALY_05000395 (__SILICON_REVISION__ < 1) -/* Header Indirect Bit Not Functional */ -#define ANOMALY_05000396 (__SILICON_REVISION__ < 1) -/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ -#define ANOMALY_05000397 (__SILICON_REVISION__ < 1) /* Lockbox SESR Disallows Certain User Interrupts */ #define ANOMALY_05000404 (__SILICON_REVISION__ < 2) /* Lockbox SESR Firmware Does Not Save/Restore Full Context */ @@ -161,7 +81,7 @@ /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_05000416 (1) /* Multichannel SPORT Channel Misalignment Under Specific Configuration */ -#define ANOMALY_05000425 (1) +#define ANOMALY_05000425 (__SILICON_REVISION__ < 4) /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */ @@ -174,8 +94,6 @@ #define ANOMALY_05000431 (__SILICON_REVISION__ < 3) /* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ #define ANOMALY_05000434 (1) -/* OTP Write Accesses Not Supported */ -#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ @@ -186,34 +104,32 @@ #define ANOMALY_05000448 (__SILICON_REVISION__ == 1) /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ #define ANOMALY_05000449 (__SILICON_REVISION__ == 1) -/* USB DMA Mode 1 Short Packet Data Corruption */ +/* USB DMA Short Packet Data Corruption */ #define ANOMALY_05000450 (1) -/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ #define ANOMALY_05000456 (1) /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ #define ANOMALY_05000457 (1) /* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ -#define ANOMALY_05000460 (1) +#define ANOMALY_05000460 (__SILICON_REVISION__ < 4) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ -#define ANOMALY_05000462 (1) +#define ANOMALY_05000462 (__SILICON_REVISION__ < 4) /* USB DMA RX Data Corruption */ -#define ANOMALY_05000463 (1) +#define ANOMALY_05000463 (__SILICON_REVISION__ < 4) /* USB TX DMA Hang */ -#define ANOMALY_05000464 (1) -/* USB Rx DMA hang */ +#define ANOMALY_05000464 (__SILICON_REVISION__ < 4) +/* USB Rx DMA Hang */ #define ANOMALY_05000465 (1) /* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ -#define ANOMALY_05000466 (1) -/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ -#define ANOMALY_05000467 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000466 (__SILICON_REVISION__ < 4) +/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */ +#define ANOMALY_05000467 (__SILICON_REVISION__ < 4) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ -#define ANOMALY_05000474 (1) +/* Access to DDR SDRAM Causes System Hang with Certain PLL Settings */ +#define ANOMALY_05000474 (__SILICON_REVISION__ < 4) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ @@ -223,9 +139,111 @@ /* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */ #define ANOMALY_05000484 (__SILICON_REVISION__ < 3) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ -#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) -/* IFLUSH sucks at life */ +#define ANOMALY_05000485 (__SILICON_REVISION__ > 1 && __SILICON_REVISION__ < 4) +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* Nand Flash Controller Hangs When the AMC Requests the Async Pins During the last 16 Bytes of a Page Write Operation. */ +#define ANOMALY_05000500 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) +/* Async Memory Writes May Be Skipped When Using Odd Clock Ratios */ +#define ANOMALY_05000502 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* False Hardware Error when ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) +/* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) +/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ +#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) +/* Synchronous Burst Flash Boot Mode Is Not Functional */ +#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) +/* Host DMA Boot Modes Are Not Functional */ +#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) +/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ +#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) +/* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) +/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ +#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) +/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) +/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ +#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) +/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ +#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) +/* USB Calibration Value to use */ +#define ANOMALY_05000346_value 0x5411 +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) +/* Data Lost when Core Reads SDH Data FIFO */ +#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) +/* PLL Status Register Is Inaccurate */ +#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (__SILICON_REVISION__ < 1) +/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */ +#define ANOMALY_05000356 (__SILICON_REVISION__ < 1) +/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */ +#define ANOMALY_05000367 (__SILICON_REVISION__ < 1) +/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */ +#define ANOMALY_05000370 (__SILICON_REVISION__ < 1) +/* USB DP/DM Data Pins May Lose State When Entering Hibernate */ +#define ANOMALY_05000372 (__SILICON_REVISION__ < 1) +/* 8-Bit NAND Flash Boot Mode Not Functional */ +#define ANOMALY_05000382 (__SILICON_REVISION__ < 1) +/* Boot from OTP Memory Not Functional */ +#define ANOMALY_05000385 (__SILICON_REVISION__ < 1) +/* bfrom_SysControl() Firmware Routine Not Functional */ +#define ANOMALY_05000386 (__SILICON_REVISION__ < 1) +/* Programmable Preboot Settings Not Functional */ +#define ANOMALY_05000387 (__SILICON_REVISION__ < 1) +/* CRC32 Checksum Support Not Functional */ +#define ANOMALY_05000388 (__SILICON_REVISION__ < 1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (__SILICON_REVISION__ < 1) +/* Changed Meaning of BCODE Field in SYSCR Register */ +#define ANOMALY_05000390 (__SILICON_REVISION__ < 1) +/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */ +#define ANOMALY_05000391 (__SILICON_REVISION__ < 1) +/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (__SILICON_REVISION__ < 1) +/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (__SILICON_REVISION__ < 1) +/* Log Buffer Not Functional */ +#define ANOMALY_05000394 (__SILICON_REVISION__ < 1) +/* Hook Routine Not Functional */ +#define ANOMALY_05000395 (__SILICON_REVISION__ < 1) +/* Header Indirect Bit Not Functional */ +#define ANOMALY_05000396 (__SILICON_REVISION__ < 1) +/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ +#define ANOMALY_05000397 (__SILICON_REVISION__ < 1) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 7db4335..35c8ced 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -170,6 +170,8 @@ #define MAX_BLACKFIN_GPIOS 160 +#define BFIN_GPIO_PINT 1 + #ifndef __ASSEMBLY__ struct gpio_port_t { diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 533b809..10dc142 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -438,7 +438,7 @@ struct bfin_pint_regs { u32 mask_set; u32 mask_clear; - u32 irq; + u32 request; u32 assign; u32 edge_set; u32 edge_clear; diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 9231a94..972e134 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -364,14 +364,6 @@ static struct flash_platform_data bfin_spi_dataflash_data = { /* DataFlash chip */ static struct bfin5xx_spi_chip data_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip */ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -420,7 +412,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 3, - .controller_data = &spidev_chip_info, }, #endif #if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 87595cd..e4f397d 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -60,29 +60,6 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, }; #endif @@ -100,24 +77,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -126,7 +91,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -532,6 +496,24 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF46, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PF46 */ + gpio_direction_output(GPIO_PF46, 0); + mdelay(2); + gpio_set_value(GPIO_PF46, 1); +#endif + + return 0; +} + static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -543,6 +525,10 @@ static int __init cm_bf561_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 5067984..9490dc8 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -108,6 +108,9 @@ static struct resource net2272_bfin_resources[] = { .end = 0x2C000000 + 0x7F, .flags = IORESOURCE_MEM, }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { .start = IRQ_PF10, .end = IRQ_PF10, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, @@ -283,21 +286,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { @@ -345,7 +333,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, .platform_data = "ad1836", /* only includes chip name for the moment */ - .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -355,7 +342,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; @@ -516,6 +502,24 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF11, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF11, 0); + mdelay(2); + gpio_set_value(GPIO_PF11, 1); +#endif + + return 0; +} + static int __init ezkit_init(void) { int ret; @@ -542,6 +546,9 @@ static int __init ezkit_init(void) udelay(400); #endif + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 22b5ab7..836baee 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision R, 05/25/2010; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision S, 05/23/2011; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -26,62 +26,16 @@ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ -#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */ #define ANOMALY_05000120 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Erroneous Exception when Enabling Cache */ -#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) /* SIGNBITS Instruction Not Functional under Certain Conditions */ #define ANOMALY_05000127 (1) -/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ -#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) -/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ -#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) -/* Stall in multi-unit DMA operations */ -#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) -/* Allowing the SPORT RX FIFO to fill will cause an overflow */ -#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ -#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) -/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ -#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) -/* DMA and TESTSET conflict when both are accessing external memory */ -#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) -/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ -#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) -/* MDMA may lose the first few words of a descriptor chain */ -#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) -/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ -#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) /* IMDMA S1/D1 Channel May Stall */ #define ANOMALY_05000149 (1) -/* DMA engine may lose data due to incorrect handshaking */ -#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) -/* DMA stalls when all three controllers read data from the same source */ -#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) -/* Execution stall when executing in L2 and doing external accesses */ -#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) -/* Frame Delay in SPORT Multichannel Mode */ -#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) -/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ -#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ #define ANOMALY_05000156 (__SILICON_REVISION__ < 4) -/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ -#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ -#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) -/* A read from external memory may return a wrong value with data cache enabled */ -#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) -/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ -#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL<12> is not set on Reset */ -#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) -/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ -#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) /* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ @@ -92,10 +46,6 @@ #define ANOMALY_05000169 (__SILICON_REVISION__ < 5) /* Boot-ROM Modifies SICA_IWRx Wakeup Registers */ #define ANOMALY_05000171 (__SILICON_REVISION__ < 5) -/* DSPID register values incorrect */ -#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) -/* DMA vs Core accesses to external memory */ -#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) /* Cache Fill Buffer Data lost */ #define ANOMALY_05000174 (__SILICON_REVISION__ < 5) /* Overlapping Sequencer and Memory Stalls */ @@ -124,8 +74,6 @@ #define ANOMALY_05000189 (__SILICON_REVISION__ < 5) /* PPI Not Functional at Core Voltage < 1Volt */ #define ANOMALY_05000190 (1) -/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ -#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ #define ANOMALY_05000193 (__SILICON_REVISION__ < 5) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ @@ -217,10 +165,10 @@ /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ #define ANOMALY_05000276 (__SILICON_REVISION__ < 5) /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ -#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +#define ANOMALY_05000277 (__SILICON_REVISION__ < 5) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ /* Temporarily walk around for bug 5423 till this issue is confirmed by * official anomaly document. It looks 05000281 still exists on bf561 * v0.5. @@ -274,8 +222,6 @@ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) -/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ == 4) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) /* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */ @@ -298,16 +244,82 @@ #define ANOMALY_05000462 (1) /* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ #define ANOMALY_05000471 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Erroneous Exception when Enabling Cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ == 4) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h index 57d5eab..f9f8b2a 100644 --- a/arch/blackfin/mach-bf561/include/mach/gpio.h +++ b/arch/blackfin/mach-bf561/include/mach/gpio.h @@ -58,9 +58,9 @@ #define GPIO_PF46 46 #define GPIO_PF47 47 -#define PORT_FIO0 GPIO_0 -#define PORT_FIO1 GPIO_16 -#define PORT_FIO2 GPIO_32 +#define PORT_FIO0 GPIO_PF0 +#define PORT_FIO1 GPIO_PF16 +#define PORT_FIO2 GPIO_PF32 #include <mach-common/ports-f.h> diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S index 4c46283..01e5408 100644 --- a/arch/blackfin/mach-bf561/secondary.S +++ b/arch/blackfin/mach-bf561/secondary.S @@ -23,108 +23,78 @@ #define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) ENTRY(_coreb_trampoline_start) - /* Set the SYSCFG register */ - R0 = 0x36; - SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ - R0 = 0; - - /*Clear Out All the data and pointer Registers*/ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - R7 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers*/ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; - trace_buffer_init(p0,r0); + /* Optimization register tricks: keep a base value in the + * reserved P registers so we use the load/store with an + * offset syntax. R0 = [P5 + <constant>]; + * P5 - core MMR base + * R6 - 0 + */ + r6 = 0; + p5.l = 0; + p5.h = hi(COREMMR_BASE); - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; + /* Zero out registers required by Blackfin ABI */ - /* Disabling of CPLBs should be proceeded by a CSYNC */ + /* Disable circular buffers */ + L0 = r6; + L1 = r6; + L2 = r6; + L3 = r6; + + /* Disable hardware loops in case we were started by 'go' */ + LC0 = r6; + LC1 = r6; + + /* + * Clear ITEST_COMMAND and DTEST_COMMAND registers, + * Leaving these as non-zero can confuse the emulator + */ + [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6; + [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6; CSYNC; - [p0] = R0; + + trace_buffer_init(p0,r0); + + /* Turn off the icache */ + r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENICPLB_P); + [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1; SSYNC; /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Disabling of CPLBs should be proceeded by a CSYNC */ - CSYNC; - [p0] = R0; + r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENDCPLB_P); + [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1; SSYNC; /* in case of double faults, save a few things */ - p0.l = _init_retx_coreb; - p0.h = _init_retx_coreb; - R0 = RETX; - [P0] = R0; - + p1.l = _initial_pda_coreb; + p1.h = _initial_pda_coreb; + r4 = RETX; #ifdef CONFIG_DEBUG_DOUBLEFAULT /* Only save these if we are storing them, * This happens here, since L1 gets clobbered * below */ GET_PDA(p0, r0); - r7 = [p0 + PDA_DF_RETX]; - p1.l = _init_saved_retx_coreb; - p1.h = _init_saved_retx_coreb; - [p1] = r7; - - r7 = [p0 + PDA_DF_DCPLB]; - p1.l = _init_saved_dcplb_fault_addr_coreb; - p1.h = _init_saved_dcplb_fault_addr_coreb; - [p1] = r7; - - r7 = [p0 + PDA_DF_ICPLB]; - p1.l = _init_saved_icplb_fault_addr_coreb; - p1.h = _init_saved_icplb_fault_addr_coreb; - [p1] = r7; - - r7 = [p0 + PDA_DF_SEQSTAT]; - p1.l = _init_saved_seqstat_coreb; - p1.h = _init_saved_seqstat_coreb; - [p1] = r7; + r0 = [p0 + PDA_DF_RETX]; + r1 = [p0 + PDA_DF_DCPLB]; + r2 = [p0 + PDA_DF_ICPLB]; + r3 = [p0 + PDA_DF_SEQSTAT]; + [p1 + PDA_INIT_DF_RETX] = r0; + [p1 + PDA_INIT_DF_DCPLB] = r1; + [p1 + PDA_INIT_DF_ICPLB] = r2; + [p1 + PDA_INIT_DF_SEQSTAT] = r3; #endif + [p1 + PDA_INIT_RETX] = r4; /* Initialize stack pointer */ sp.l = lo(INITIAL_STACK); @@ -138,19 +108,13 @@ ENTRY(_coreb_trampoline_start) /* EVT15 = _real_start */ - p0.l = lo(EVT15); - p0.h = hi(EVT15); p1.l = _coreb_start; p1.h = _coreb_start; - [p0] = p1; + [p5 + (EVT15 - COREMMR_BASE)] = p1; csync; - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; + r0 = EVT_IVG15 (z); + sti r0; raise 15; p0.l = .LWAIT_HERE; diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 9cfdd49..1c534d2 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -12,8 +12,8 @@ .section .l1.text ENTRY(_sleep_mode) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; + [--SP] = (R7:4, P5:3); + [--SP] = RETS; call _set_sic_iwr; @@ -46,15 +46,25 @@ ENTRY(_sleep_mode) call _test_pll_locked; RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; + (R7:4, P5:3) = [SP++]; RTS; ENDPROC(_sleep_mode) +/* + * This func never returns as it puts the part into hibernate, and + * is only called from do_hibernate, so we don't bother saving or + * restoring any of the normal C runtime state. When we wake up, + * the entry point will be in do_hibernate and not here. + * + * We accept just one argument -- the value to write to VR_CTL. + */ ENTRY(_hibernate_mode) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; + /* Save/setup the regs we need early for minor pipeline optimization */ + R4 = R0; + P3.H = hi(VR_CTL); + P3.L = lo(VR_CTL); - R3 = R0; + /* Disable all wakeup sources */ R0 = IWR_DISABLE_ALL; R1 = IWR_DISABLE_ALL; R2 = IWR_DISABLE_ALL; @@ -62,10 +72,8 @@ ENTRY(_hibernate_mode) call _set_dram_srfs; SSYNC; - P0.H = hi(VR_CTL); - P0.L = lo(VR_CTL); - - W[P0] = R3.L; + /* Finally, we climb into our cave to hibernate */ + W[P3] = R4.L; CLI R2; IDLE; .Lforever: @@ -73,8 +81,8 @@ ENTRY(_hibernate_mode) ENDPROC(_hibernate_mode) ENTRY(_sleep_deeper) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; + [--SP] = (R7:4, P5:3); + [--SP] = RETS; CLI R4; @@ -167,7 +175,7 @@ ENTRY(_sleep_deeper) STI R4; RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; + (R7:4, P5:3) = [SP++]; RTS; ENDPROC(_sleep_deeper) @@ -188,21 +196,20 @@ ENTRY(_set_dram_srfs) #else /* SDRAM */ P0.L = lo(EBIU_SDGCTL); P0.H = hi(EBIU_SDGCTL); + P1.L = lo(EBIU_SDSTAT); + P1.H = hi(EBIU_SDSTAT); + R2 = [P0]; BITSET(R2, 24); /* SRFS enter self-refresh mode */ [P0] = R2; SSYNC; - P0.L = lo(EBIU_SDSTAT); - P0.H = hi(EBIU_SDSTAT); 1: - R2 = w[P0]; + R2 = w[P1]; SSYNC; cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */ if !cc jump 1b; - P0.L = lo(EBIU_SDGCTL); - P0.H = hi(EBIU_SDGCTL); R2 = [P0]; BITCLR(R2, 0); /* SCTLE disable CLKOUT */ [P0] = R2; @@ -212,6 +219,7 @@ ENDPROC(_set_dram_srfs) ENTRY(_unset_dram_srfs) /* set the dram out of self refresh mode */ + #if defined(EBIU_RSTCTL) /* DDR */ P0.H = hi(EBIU_RSTCTL); P0.L = lo(EBIU_RSTCTL); @@ -219,42 +227,39 @@ ENTRY(_unset_dram_srfs) BITCLR(R2, 3); /* clear SRREQ bit */ [P0] = R2; #elif defined(EBIU_SDGCTL) /* SDRAM */ - - P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */ + /* release CLKOUT from self-refresh */ + P0.L = lo(EBIU_SDGCTL); P0.H = hi(EBIU_SDGCTL); + R2 = [P0]; BITSET(R2, 0); /* SCTLE enable CLKOUT */ [P0] = R2 SSYNC; - P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */ - P0.H = hi(EBIU_SDGCTL); + /* release SDRAM from self-refresh */ R2 = [P0]; BITCLR(R2, 24); /* clear SRFS bit */ [P0] = R2 #endif + SSYNC; RTS; ENDPROC(_unset_dram_srfs) ENTRY(_set_sic_iwr) -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ - defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) - P0.H = hi(SIC_IWR0); - P0.L = lo(SIC_IWR0); - P1.H = hi(SIC_IWR1); - P1.L = lo(SIC_IWR1); - [P1] = R1; -#if defined(CONFIG_BF54x) - P1.H = hi(SIC_IWR2); - P1.L = lo(SIC_IWR2); - [P1] = R2; -#endif +#ifdef SIC_IWR0 + P0.H = hi(SYSMMR_BASE); + P0.L = lo(SYSMMR_BASE); + [P0 + (SIC_IWR0 - SYSMMR_BASE)] = R0; + [P0 + (SIC_IWR1 - SYSMMR_BASE)] = R1; +# ifdef SIC_IWR2 + [P0 + (SIC_IWR2 - SYSMMR_BASE)] = R2; +# endif #else P0.H = hi(SIC_IWR); P0.L = lo(SIC_IWR); -#endif [P0] = R0; +#endif SSYNC; RTS; @@ -272,206 +277,55 @@ ENDPROC(_test_pll_locked) .section .text -ENTRY(_do_hibernate) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; - /* Save System MMRs */ - R2 = R0; - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - -#ifdef SIC_IMASK0 - PM_SYS_PUSH(SIC_IMASK0) -#endif -#ifdef SIC_IMASK1 - PM_SYS_PUSH(SIC_IMASK1) -#endif -#ifdef SIC_IMASK2 - PM_SYS_PUSH(SIC_IMASK2) -#endif -#ifdef SIC_IMASK - PM_SYS_PUSH(SIC_IMASK) -#endif -#ifdef SIC_IAR0 - PM_SYS_PUSH(SIC_IAR0) - PM_SYS_PUSH(SIC_IAR1) - PM_SYS_PUSH(SIC_IAR2) -#endif -#ifdef SIC_IAR3 - PM_SYS_PUSH(SIC_IAR3) -#endif -#ifdef SIC_IAR4 - PM_SYS_PUSH(SIC_IAR4) - PM_SYS_PUSH(SIC_IAR5) - PM_SYS_PUSH(SIC_IAR6) -#endif -#ifdef SIC_IAR7 - PM_SYS_PUSH(SIC_IAR7) -#endif -#ifdef SIC_IAR8 - PM_SYS_PUSH(SIC_IAR8) - PM_SYS_PUSH(SIC_IAR9) - PM_SYS_PUSH(SIC_IAR10) - PM_SYS_PUSH(SIC_IAR11) -#endif +#define PM_REG0 R7 +#define PM_REG1 R6 +#define PM_REG2 R5 +#define PM_REG3 R4 +#define PM_REG4 R3 +#define PM_REG5 R2 +#define PM_REG6 R1 +#define PM_REG7 R0 +#define PM_REG8 P5 +#define PM_REG9 P4 +#define PM_REG10 P3 +#define PM_REG11 P2 +#define PM_REG12 P1 +#define PM_REG13 P0 + +#define PM_REGSET0 R7:7 +#define PM_REGSET1 R7:6 +#define PM_REGSET2 R7:5 +#define PM_REGSET3 R7:4 +#define PM_REGSET4 R7:3 +#define PM_REGSET5 R7:2 +#define PM_REGSET6 R7:1 +#define PM_REGSET7 R7:0 +#define PM_REGSET8 R7:0, P5:5 +#define PM_REGSET9 R7:0, P5:4 +#define PM_REGSET10 R7:0, P5:3 +#define PM_REGSET11 R7:0, P5:2 +#define PM_REGSET12 R7:0, P5:1 +#define PM_REGSET13 R7:0, P5:0 + +#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))]; +#define _PM_POP(n, x, w, base) w[FP + ((x) - (base))] = PM_REG##n; +#define PM_PUSH_SYNC(n) [--sp] = (PM_REGSET##n); +#define PM_POP_SYNC(n) (PM_REGSET##n) = [sp++]; +#define PM_PUSH(n, x) PM_REG##n = [FP++]; +#define PM_POP(n, x) [FP--] = PM_REG##n; +#define PM_CORE_PUSH(n, x) _PM_PUSH(n, x, , COREMMR_BASE) +#define PM_CORE_POP(n, x) _PM_POP(n, x, , COREMMR_BASE) +#define PM_SYS_PUSH(n, x) _PM_PUSH(n, x, , SYSMMR_BASE) +#define PM_SYS_POP(n, x) _PM_POP(n, x, , SYSMMR_BASE) +#define PM_SYS_PUSH16(n, x) _PM_PUSH(n, x, w, SYSMMR_BASE) +#define PM_SYS_POP16(n, x) _PM_POP(n, x, w, SYSMMR_BASE) -#ifdef SIC_IWR - PM_SYS_PUSH(SIC_IWR) -#endif -#ifdef SIC_IWR0 - PM_SYS_PUSH(SIC_IWR0) -#endif -#ifdef SIC_IWR1 - PM_SYS_PUSH(SIC_IWR1) -#endif -#ifdef SIC_IWR2 - PM_SYS_PUSH(SIC_IWR2) -#endif - -#ifdef PINT0_ASSIGN - PM_SYS_PUSH(PINT0_MASK_SET) - PM_SYS_PUSH(PINT1_MASK_SET) - PM_SYS_PUSH(PINT2_MASK_SET) - PM_SYS_PUSH(PINT3_MASK_SET) - PM_SYS_PUSH(PINT0_ASSIGN) - PM_SYS_PUSH(PINT1_ASSIGN) - PM_SYS_PUSH(PINT2_ASSIGN) - PM_SYS_PUSH(PINT3_ASSIGN) - PM_SYS_PUSH(PINT0_INVERT_SET) - PM_SYS_PUSH(PINT1_INVERT_SET) - PM_SYS_PUSH(PINT2_INVERT_SET) - PM_SYS_PUSH(PINT3_INVERT_SET) - PM_SYS_PUSH(PINT0_EDGE_SET) - PM_SYS_PUSH(PINT1_EDGE_SET) - PM_SYS_PUSH(PINT2_EDGE_SET) - PM_SYS_PUSH(PINT3_EDGE_SET) -#endif - - PM_SYS_PUSH(EBIU_AMBCTL0) - PM_SYS_PUSH(EBIU_AMBCTL1) - PM_SYS_PUSH16(EBIU_AMGCTL) - -#ifdef EBIU_FCTL - PM_SYS_PUSH(EBIU_MBSCTL) - PM_SYS_PUSH(EBIU_MODE) - PM_SYS_PUSH(EBIU_FCTL) -#endif - -#ifdef PORTCIO_FER - PM_SYS_PUSH16(PORTCIO_DIR) - PM_SYS_PUSH16(PORTCIO_INEN) - PM_SYS_PUSH16(PORTCIO) - PM_SYS_PUSH16(PORTCIO_FER) - PM_SYS_PUSH16(PORTDIO_DIR) - PM_SYS_PUSH16(PORTDIO_INEN) - PM_SYS_PUSH16(PORTDIO) - PM_SYS_PUSH16(PORTDIO_FER) - PM_SYS_PUSH16(PORTEIO_DIR) - PM_SYS_PUSH16(PORTEIO_INEN) - PM_SYS_PUSH16(PORTEIO) - PM_SYS_PUSH16(PORTEIO_FER) -#endif - - PM_SYS_PUSH16(SYSCR) - - /* Save Core MMRs */ - P0.H = hi(SRAM_BASE_ADDRESS); - P0.L = lo(SRAM_BASE_ADDRESS); - - PM_PUSH(DMEM_CONTROL) - PM_PUSH(DCPLB_ADDR0) - PM_PUSH(DCPLB_ADDR1) - PM_PUSH(DCPLB_ADDR2) - PM_PUSH(DCPLB_ADDR3) - PM_PUSH(DCPLB_ADDR4) - PM_PUSH(DCPLB_ADDR5) - PM_PUSH(DCPLB_ADDR6) - PM_PUSH(DCPLB_ADDR7) - PM_PUSH(DCPLB_ADDR8) - PM_PUSH(DCPLB_ADDR9) - PM_PUSH(DCPLB_ADDR10) - PM_PUSH(DCPLB_ADDR11) - PM_PUSH(DCPLB_ADDR12) - PM_PUSH(DCPLB_ADDR13) - PM_PUSH(DCPLB_ADDR14) - PM_PUSH(DCPLB_ADDR15) - PM_PUSH(DCPLB_DATA0) - PM_PUSH(DCPLB_DATA1) - PM_PUSH(DCPLB_DATA2) - PM_PUSH(DCPLB_DATA3) - PM_PUSH(DCPLB_DATA4) - PM_PUSH(DCPLB_DATA5) - PM_PUSH(DCPLB_DATA6) - PM_PUSH(DCPLB_DATA7) - PM_PUSH(DCPLB_DATA8) - PM_PUSH(DCPLB_DATA9) - PM_PUSH(DCPLB_DATA10) - PM_PUSH(DCPLB_DATA11) - PM_PUSH(DCPLB_DATA12) - PM_PUSH(DCPLB_DATA13) - PM_PUSH(DCPLB_DATA14) - PM_PUSH(DCPLB_DATA15) - PM_PUSH(IMEM_CONTROL) - PM_PUSH(ICPLB_ADDR0) - PM_PUSH(ICPLB_ADDR1) - PM_PUSH(ICPLB_ADDR2) - PM_PUSH(ICPLB_ADDR3) - PM_PUSH(ICPLB_ADDR4) - PM_PUSH(ICPLB_ADDR5) - PM_PUSH(ICPLB_ADDR6) - PM_PUSH(ICPLB_ADDR7) - PM_PUSH(ICPLB_ADDR8) - PM_PUSH(ICPLB_ADDR9) - PM_PUSH(ICPLB_ADDR10) - PM_PUSH(ICPLB_ADDR11) - PM_PUSH(ICPLB_ADDR12) - PM_PUSH(ICPLB_ADDR13) - PM_PUSH(ICPLB_ADDR14) - PM_PUSH(ICPLB_ADDR15) - PM_PUSH(ICPLB_DATA0) - PM_PUSH(ICPLB_DATA1) - PM_PUSH(ICPLB_DATA2) - PM_PUSH(ICPLB_DATA3) - PM_PUSH(ICPLB_DATA4) - PM_PUSH(ICPLB_DATA5) - PM_PUSH(ICPLB_DATA6) - PM_PUSH(ICPLB_DATA7) - PM_PUSH(ICPLB_DATA8) - PM_PUSH(ICPLB_DATA9) - PM_PUSH(ICPLB_DATA10) - PM_PUSH(ICPLB_DATA11) - PM_PUSH(ICPLB_DATA12) - PM_PUSH(ICPLB_DATA13) - PM_PUSH(ICPLB_DATA14) - PM_PUSH(ICPLB_DATA15) - PM_PUSH(EVT0) - PM_PUSH(EVT1) - PM_PUSH(EVT2) - PM_PUSH(EVT3) - PM_PUSH(EVT4) - PM_PUSH(EVT5) - PM_PUSH(EVT6) - PM_PUSH(EVT7) - PM_PUSH(EVT8) - PM_PUSH(EVT9) - PM_PUSH(EVT10) - PM_PUSH(EVT11) - PM_PUSH(EVT12) - PM_PUSH(EVT13) - PM_PUSH(EVT14) - PM_PUSH(EVT15) - PM_PUSH(IMASK) - PM_PUSH(ILAT) - PM_PUSH(IPRIO) - PM_PUSH(TCNTL) - PM_PUSH(TPERIOD) - PM_PUSH(TSCALE) - PM_PUSH(TCOUNT) - PM_PUSH(TBUFCTL) - - /* Save Core Registers */ - [--sp] = SYSCFG; - [--sp] = ( R7:0, P5:0 ); +ENTRY(_do_hibernate) + /* + * Save the core regs early so we can blow them away when + * saving/restoring MMR states + */ + [--sp] = (R7:0, P5:0); [--sp] = fp; [--sp] = usp; @@ -506,47 +360,497 @@ ENTRY(_do_hibernate) [--sp] = LB0; [--sp] = LB1; + /* We can't push RETI directly as that'll change IPEND[4] */ + r7 = RETI; + [--sp] = RETS; [--sp] = ASTAT; [--sp] = CYCLES; [--sp] = CYCLES2; - - [--sp] = RETS; - r0 = RETI; - [--sp] = r0; + [--sp] = SYSCFG; [--sp] = RETX; - [--sp] = RETN; - [--sp] = RETE; [--sp] = SEQSTAT; + [--sp] = r7; + + /* Save first func arg in M3 */ + M3 = R0; + + /* Save system MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); + +#ifdef SIC_IMASK0 + PM_SYS_PUSH(0, SIC_IMASK0) + PM_SYS_PUSH(1, SIC_IMASK1) +# ifdef SIC_IMASK2 + PM_SYS_PUSH(2, SIC_IMASK2) +# endif +#else + PM_SYS_PUSH(0, SIC_IMASK) +#endif +#ifdef SIC_IAR0 + PM_SYS_PUSH(3, SIC_IAR0) + PM_SYS_PUSH(4, SIC_IAR1) + PM_SYS_PUSH(5, SIC_IAR2) +#endif +#ifdef SIC_IAR3 + PM_SYS_PUSH(6, SIC_IAR3) +#endif +#ifdef SIC_IAR4 + PM_SYS_PUSH(7, SIC_IAR4) + PM_SYS_PUSH(8, SIC_IAR5) + PM_SYS_PUSH(9, SIC_IAR6) +#endif +#ifdef SIC_IAR7 + PM_SYS_PUSH(10, SIC_IAR7) +#endif +#ifdef SIC_IAR8 + PM_SYS_PUSH(11, SIC_IAR8) + PM_SYS_PUSH(12, SIC_IAR9) + PM_SYS_PUSH(13, SIC_IAR10) +#endif + PM_PUSH_SYNC(13) +#ifdef SIC_IAR11 + PM_SYS_PUSH(0, SIC_IAR11) +#endif + +#ifdef SIC_IWR + PM_SYS_PUSH(1, SIC_IWR) +#endif +#ifdef SIC_IWR0 + PM_SYS_PUSH(1, SIC_IWR0) +#endif +#ifdef SIC_IWR1 + PM_SYS_PUSH(2, SIC_IWR1) +#endif +#ifdef SIC_IWR2 + PM_SYS_PUSH(3, SIC_IWR2) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_PUSH(4, PINT0_MASK_SET) + PM_SYS_PUSH(5, PINT1_MASK_SET) + PM_SYS_PUSH(6, PINT2_MASK_SET) + PM_SYS_PUSH(7, PINT3_MASK_SET) + PM_SYS_PUSH(8, PINT0_ASSIGN) + PM_SYS_PUSH(9, PINT1_ASSIGN) + PM_SYS_PUSH(10, PINT2_ASSIGN) + PM_SYS_PUSH(11, PINT3_ASSIGN) + PM_SYS_PUSH(12, PINT0_INVERT_SET) + PM_SYS_PUSH(13, PINT1_INVERT_SET) + PM_PUSH_SYNC(13) + PM_SYS_PUSH(0, PINT2_INVERT_SET) + PM_SYS_PUSH(1, PINT3_INVERT_SET) + PM_SYS_PUSH(2, PINT0_EDGE_SET) + PM_SYS_PUSH(3, PINT1_EDGE_SET) + PM_SYS_PUSH(4, PINT2_EDGE_SET) + PM_SYS_PUSH(5, PINT3_EDGE_SET) +#endif + + PM_SYS_PUSH16(6, SYSCR) + + PM_SYS_PUSH16(7, EBIU_AMGCTL) + PM_SYS_PUSH(8, EBIU_AMBCTL0) + PM_SYS_PUSH(9, EBIU_AMBCTL1) +#ifdef EBIU_FCTL + PM_SYS_PUSH(10, EBIU_MBSCTL) + PM_SYS_PUSH(11, EBIU_MODE) + PM_SYS_PUSH(12, EBIU_FCTL) + PM_PUSH_SYNC(12) +#else + PM_PUSH_SYNC(9) +#endif + + /* Save Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR0); + I2.L = lo(DCPLB_DATA0); + I3.L = lo(ICPLB_ADDR0); + B0.L = lo(ICPLB_DATA0); + B1.L = lo(EVT2); + B2.L = lo(IMASK); + B3.L = lo(TCNTL); + + /* DCPLB Addr */ + FP = I1; + PM_PUSH(0, DCPLB_ADDR0) + PM_PUSH(1, DCPLB_ADDR1) + PM_PUSH(2, DCPLB_ADDR2) + PM_PUSH(3, DCPLB_ADDR3) + PM_PUSH(4, DCPLB_ADDR4) + PM_PUSH(5, DCPLB_ADDR5) + PM_PUSH(6, DCPLB_ADDR6) + PM_PUSH(7, DCPLB_ADDR7) + PM_PUSH(8, DCPLB_ADDR8) + PM_PUSH(9, DCPLB_ADDR9) + PM_PUSH(10, DCPLB_ADDR10) + PM_PUSH(11, DCPLB_ADDR11) + PM_PUSH(12, DCPLB_ADDR12) + PM_PUSH(13, DCPLB_ADDR13) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_ADDR14) + PM_PUSH(1, DCPLB_ADDR15) + + /* DCPLB Data */ + FP = I2; + PM_PUSH(2, DCPLB_DATA0) + PM_PUSH(3, DCPLB_DATA1) + PM_PUSH(4, DCPLB_DATA2) + PM_PUSH(5, DCPLB_DATA3) + PM_PUSH(6, DCPLB_DATA4) + PM_PUSH(7, DCPLB_DATA5) + PM_PUSH(8, DCPLB_DATA6) + PM_PUSH(9, DCPLB_DATA7) + PM_PUSH(10, DCPLB_DATA8) + PM_PUSH(11, DCPLB_DATA9) + PM_PUSH(12, DCPLB_DATA10) + PM_PUSH(13, DCPLB_DATA11) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_DATA12) + PM_PUSH(1, DCPLB_DATA13) + PM_PUSH(2, DCPLB_DATA14) + PM_PUSH(3, DCPLB_DATA15) + + /* ICPLB Addr */ + FP = I3; + PM_PUSH(4, ICPLB_ADDR0) + PM_PUSH(5, ICPLB_ADDR1) + PM_PUSH(6, ICPLB_ADDR2) + PM_PUSH(7, ICPLB_ADDR3) + PM_PUSH(8, ICPLB_ADDR4) + PM_PUSH(9, ICPLB_ADDR5) + PM_PUSH(10, ICPLB_ADDR6) + PM_PUSH(11, ICPLB_ADDR7) + PM_PUSH(12, ICPLB_ADDR8) + PM_PUSH(13, ICPLB_ADDR9) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_ADDR10) + PM_PUSH(1, ICPLB_ADDR11) + PM_PUSH(2, ICPLB_ADDR12) + PM_PUSH(3, ICPLB_ADDR13) + PM_PUSH(4, ICPLB_ADDR14) + PM_PUSH(5, ICPLB_ADDR15) + + /* ICPLB Data */ + FP = B0; + PM_PUSH(6, ICPLB_DATA0) + PM_PUSH(7, ICPLB_DATA1) + PM_PUSH(8, ICPLB_DATA2) + PM_PUSH(9, ICPLB_DATA3) + PM_PUSH(10, ICPLB_DATA4) + PM_PUSH(11, ICPLB_DATA5) + PM_PUSH(12, ICPLB_DATA6) + PM_PUSH(13, ICPLB_DATA7) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_DATA8) + PM_PUSH(1, ICPLB_DATA9) + PM_PUSH(2, ICPLB_DATA10) + PM_PUSH(3, ICPLB_DATA11) + PM_PUSH(4, ICPLB_DATA12) + PM_PUSH(5, ICPLB_DATA13) + PM_PUSH(6, ICPLB_DATA14) + PM_PUSH(7, ICPLB_DATA15) + + /* Event Vectors */ + FP = B1; + PM_PUSH(8, EVT2) + PM_PUSH(9, EVT3) + FP += 4; /* EVT4 */ + PM_PUSH(10, EVT5) + PM_PUSH(11, EVT6) + PM_PUSH(12, EVT7) + PM_PUSH(13, EVT8) + PM_PUSH_SYNC(13) + PM_PUSH(0, EVT9) + PM_PUSH(1, EVT10) + PM_PUSH(2, EVT11) + PM_PUSH(3, EVT12) + PM_PUSH(4, EVT13) + PM_PUSH(5, EVT14) + PM_PUSH(6, EVT15) + + /* CEC */ + FP = B2; + PM_PUSH(7, IMASK) + FP += 4; /* IPEND */ + PM_PUSH(8, ILAT) + PM_PUSH(9, IPRIO) + + /* Core Timer */ + FP = B3; + PM_PUSH(10, TCNTL) + PM_PUSH(11, TPERIOD) + PM_PUSH(12, TSCALE) + PM_PUSH(13, TCOUNT) + PM_PUSH_SYNC(13) + + /* Misc non-contiguous registers */ + FP = I0; + PM_CORE_PUSH(0, DMEM_CONTROL); + PM_CORE_PUSH(1, IMEM_CONTROL); + PM_CORE_PUSH(2, TBUFCTL); + PM_PUSH_SYNC(2) + + /* Setup args to hibernate mode early for pipeline optimization */ + R0 = M3; + P1.H = _hibernate_mode; + P1.L = _hibernate_mode; /* Save Magic, return address and Stack Pointer */ - P0.H = 0; - P0.L = 0; - R0.H = 0xDEAD; /* Hibernate Magic */ - R0.L = 0xBEEF; - [P0++] = R0; /* Store Hibernate Magic */ - R0.H = .Lpm_resume_here; - R0.L = .Lpm_resume_here; - [P0++] = R0; /* Save Return Address */ + P0 = 0; + R1.H = 0xDEAD; /* Hibernate Magic */ + R1.L = 0xBEEF; + R2.H = .Lpm_resume_here; + R2.L = .Lpm_resume_here; + [P0++] = R1; /* Store Hibernate Magic */ + [P0++] = R2; /* Save Return Address */ [P0++] = SP; /* Save Stack Pointer */ - P0.H = _hibernate_mode; - P0.L = _hibernate_mode; - R0 = R2; - call (P0); /* Goodbye */ + + /* Must use an indirect call as we need to jump to L1 */ + call (P1); /* Goodbye */ .Lpm_resume_here: + /* Restore Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR15); + I2.L = lo(DCPLB_DATA15); + I3.L = lo(ICPLB_ADDR15); + B0.L = lo(ICPLB_DATA15); + B1.L = lo(EVT15); + B2.L = lo(IPRIO); + B3.L = lo(TCOUNT); + + /* Misc non-contiguous registers */ + FP = I0; + PM_POP_SYNC(2) + PM_CORE_POP(2, TBUFCTL) + PM_CORE_POP(1, IMEM_CONTROL) + PM_CORE_POP(0, DMEM_CONTROL) + + /* Core Timer */ + PM_POP_SYNC(13) + FP = B3; + PM_POP(13, TCOUNT) + PM_POP(12, TSCALE) + PM_POP(11, TPERIOD) + PM_POP(10, TCNTL) + + /* CEC */ + FP = B2; + PM_POP(9, IPRIO) + PM_POP(8, ILAT) + FP += -4; /* IPEND */ + PM_POP(7, IMASK) + + /* Event Vectors */ + FP = B1; + PM_POP(6, EVT15) + PM_POP(5, EVT14) + PM_POP(4, EVT13) + PM_POP(3, EVT12) + PM_POP(2, EVT11) + PM_POP(1, EVT10) + PM_POP(0, EVT9) + PM_POP_SYNC(13) + PM_POP(13, EVT8) + PM_POP(12, EVT7) + PM_POP(11, EVT6) + PM_POP(10, EVT5) + FP += -4; /* EVT4 */ + PM_POP(9, EVT3) + PM_POP(8, EVT2) + + /* ICPLB Data */ + FP = B0; + PM_POP(7, ICPLB_DATA15) + PM_POP(6, ICPLB_DATA14) + PM_POP(5, ICPLB_DATA13) + PM_POP(4, ICPLB_DATA12) + PM_POP(3, ICPLB_DATA11) + PM_POP(2, ICPLB_DATA10) + PM_POP(1, ICPLB_DATA9) + PM_POP(0, ICPLB_DATA8) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_DATA7) + PM_POP(12, ICPLB_DATA6) + PM_POP(11, ICPLB_DATA5) + PM_POP(10, ICPLB_DATA4) + PM_POP(9, ICPLB_DATA3) + PM_POP(8, ICPLB_DATA2) + PM_POP(7, ICPLB_DATA1) + PM_POP(6, ICPLB_DATA0) + + /* ICPLB Addr */ + FP = I3; + PM_POP(5, ICPLB_ADDR15) + PM_POP(4, ICPLB_ADDR14) + PM_POP(3, ICPLB_ADDR13) + PM_POP(2, ICPLB_ADDR12) + PM_POP(1, ICPLB_ADDR11) + PM_POP(0, ICPLB_ADDR10) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_ADDR9) + PM_POP(12, ICPLB_ADDR8) + PM_POP(11, ICPLB_ADDR7) + PM_POP(10, ICPLB_ADDR6) + PM_POP(9, ICPLB_ADDR5) + PM_POP(8, ICPLB_ADDR4) + PM_POP(7, ICPLB_ADDR3) + PM_POP(6, ICPLB_ADDR2) + PM_POP(5, ICPLB_ADDR1) + PM_POP(4, ICPLB_ADDR0) + + /* DCPLB Data */ + FP = I2; + PM_POP(3, DCPLB_DATA15) + PM_POP(2, DCPLB_DATA14) + PM_POP(1, DCPLB_DATA13) + PM_POP(0, DCPLB_DATA12) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_DATA11) + PM_POP(12, DCPLB_DATA10) + PM_POP(11, DCPLB_DATA9) + PM_POP(10, DCPLB_DATA8) + PM_POP(9, DCPLB_DATA7) + PM_POP(8, DCPLB_DATA6) + PM_POP(7, DCPLB_DATA5) + PM_POP(6, DCPLB_DATA4) + PM_POP(5, DCPLB_DATA3) + PM_POP(4, DCPLB_DATA2) + PM_POP(3, DCPLB_DATA1) + PM_POP(2, DCPLB_DATA0) + + /* DCPLB Addr */ + FP = I1; + PM_POP(1, DCPLB_ADDR15) + PM_POP(0, DCPLB_ADDR14) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_ADDR13) + PM_POP(12, DCPLB_ADDR12) + PM_POP(11, DCPLB_ADDR11) + PM_POP(10, DCPLB_ADDR10) + PM_POP(9, DCPLB_ADDR9) + PM_POP(8, DCPLB_ADDR8) + PM_POP(7, DCPLB_ADDR7) + PM_POP(6, DCPLB_ADDR6) + PM_POP(5, DCPLB_ADDR5) + PM_POP(4, DCPLB_ADDR4) + PM_POP(3, DCPLB_ADDR3) + PM_POP(2, DCPLB_ADDR2) + PM_POP(1, DCPLB_ADDR1) + PM_POP(0, DCPLB_ADDR0) + + /* Restore System MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); + +#ifdef EBIU_FCTL + PM_POP_SYNC(12) + PM_SYS_POP(12, EBIU_FCTL) + PM_SYS_POP(11, EBIU_MODE) + PM_SYS_POP(10, EBIU_MBSCTL) +#else + PM_POP_SYNC(9) +#endif + PM_SYS_POP(9, EBIU_AMBCTL1) + PM_SYS_POP(8, EBIU_AMBCTL0) + PM_SYS_POP16(7, EBIU_AMGCTL) + + PM_SYS_POP16(6, SYSCR) + +#ifdef PINT0_ASSIGN + PM_SYS_POP(5, PINT3_EDGE_SET) + PM_SYS_POP(4, PINT2_EDGE_SET) + PM_SYS_POP(3, PINT1_EDGE_SET) + PM_SYS_POP(2, PINT0_EDGE_SET) + PM_SYS_POP(1, PINT3_INVERT_SET) + PM_SYS_POP(0, PINT2_INVERT_SET) + PM_POP_SYNC(13) + PM_SYS_POP(13, PINT1_INVERT_SET) + PM_SYS_POP(12, PINT0_INVERT_SET) + PM_SYS_POP(11, PINT3_ASSIGN) + PM_SYS_POP(10, PINT2_ASSIGN) + PM_SYS_POP(9, PINT1_ASSIGN) + PM_SYS_POP(8, PINT0_ASSIGN) + PM_SYS_POP(7, PINT3_MASK_SET) + PM_SYS_POP(6, PINT2_MASK_SET) + PM_SYS_POP(5, PINT1_MASK_SET) + PM_SYS_POP(4, PINT0_MASK_SET) +#endif + +#ifdef SIC_IWR2 + PM_SYS_POP(3, SIC_IWR2) +#endif +#ifdef SIC_IWR1 + PM_SYS_POP(2, SIC_IWR1) +#endif +#ifdef SIC_IWR0 + PM_SYS_POP(1, SIC_IWR0) +#endif +#ifdef SIC_IWR + PM_SYS_POP(1, SIC_IWR) +#endif + +#ifdef SIC_IAR11 + PM_SYS_POP(0, SIC_IAR11) +#endif + PM_POP_SYNC(13) +#ifdef SIC_IAR8 + PM_SYS_POP(13, SIC_IAR10) + PM_SYS_POP(12, SIC_IAR9) + PM_SYS_POP(11, SIC_IAR8) +#endif +#ifdef SIC_IAR7 + PM_SYS_POP(10, SIC_IAR7) +#endif +#ifdef SIC_IAR6 + PM_SYS_POP(9, SIC_IAR6) + PM_SYS_POP(8, SIC_IAR5) + PM_SYS_POP(7, SIC_IAR4) +#endif +#ifdef SIC_IAR3 + PM_SYS_POP(6, SIC_IAR3) +#endif +#ifdef SIC_IAR0 + PM_SYS_POP(5, SIC_IAR2) + PM_SYS_POP(4, SIC_IAR1) + PM_SYS_POP(3, SIC_IAR0) +#endif +#ifdef SIC_IMASK0 +# ifdef SIC_IMASK2 + PM_SYS_POP(2, SIC_IMASK2) +# endif + PM_SYS_POP(1, SIC_IMASK1) + PM_SYS_POP(0, SIC_IMASK0) +#else + PM_SYS_POP(0, SIC_IMASK) +#endif + /* Restore Core Registers */ + RETI = [sp++]; SEQSTAT = [sp++]; - RETE = [sp++]; - RETN = [sp++]; RETX = [sp++]; - r0 = [sp++]; - RETI = r0; - RETS = [sp++]; - + SYSCFG = [sp++]; CYCLES2 = [sp++]; CYCLES = [sp++]; ASTAT = [sp++]; + RETS = [sp++]; LB1 = [sp++]; LB0 = [sp++]; @@ -581,204 +885,10 @@ ENTRY(_do_hibernate) usp = [sp++]; fp = [sp++]; - - ( R7 : 0, P5 : 0) = [ SP ++ ]; - SYSCFG = [sp++]; - - /* Restore Core MMRs */ - - PM_POP(TBUFCTL) - PM_POP(TCOUNT) - PM_POP(TSCALE) - PM_POP(TPERIOD) - PM_POP(TCNTL) - PM_POP(IPRIO) - PM_POP(ILAT) - PM_POP(IMASK) - PM_POP(EVT15) - PM_POP(EVT14) - PM_POP(EVT13) - PM_POP(EVT12) - PM_POP(EVT11) - PM_POP(EVT10) - PM_POP(EVT9) - PM_POP(EVT8) - PM_POP(EVT7) - PM_POP(EVT6) - PM_POP(EVT5) - PM_POP(EVT4) - PM_POP(EVT3) - PM_POP(EVT2) - PM_POP(EVT1) - PM_POP(EVT0) - PM_POP(ICPLB_DATA15) - PM_POP(ICPLB_DATA14) - PM_POP(ICPLB_DATA13) - PM_POP(ICPLB_DATA12) - PM_POP(ICPLB_DATA11) - PM_POP(ICPLB_DATA10) - PM_POP(ICPLB_DATA9) - PM_POP(ICPLB_DATA8) - PM_POP(ICPLB_DATA7) - PM_POP(ICPLB_DATA6) - PM_POP(ICPLB_DATA5) - PM_POP(ICPLB_DATA4) - PM_POP(ICPLB_DATA3) - PM_POP(ICPLB_DATA2) - PM_POP(ICPLB_DATA1) - PM_POP(ICPLB_DATA0) - PM_POP(ICPLB_ADDR15) - PM_POP(ICPLB_ADDR14) - PM_POP(ICPLB_ADDR13) - PM_POP(ICPLB_ADDR12) - PM_POP(ICPLB_ADDR11) - PM_POP(ICPLB_ADDR10) - PM_POP(ICPLB_ADDR9) - PM_POP(ICPLB_ADDR8) - PM_POP(ICPLB_ADDR7) - PM_POP(ICPLB_ADDR6) - PM_POP(ICPLB_ADDR5) - PM_POP(ICPLB_ADDR4) - PM_POP(ICPLB_ADDR3) - PM_POP(ICPLB_ADDR2) - PM_POP(ICPLB_ADDR1) - PM_POP(ICPLB_ADDR0) - PM_POP(IMEM_CONTROL) - PM_POP(DCPLB_DATA15) - PM_POP(DCPLB_DATA14) - PM_POP(DCPLB_DATA13) - PM_POP(DCPLB_DATA12) - PM_POP(DCPLB_DATA11) - PM_POP(DCPLB_DATA10) - PM_POP(DCPLB_DATA9) - PM_POP(DCPLB_DATA8) - PM_POP(DCPLB_DATA7) - PM_POP(DCPLB_DATA6) - PM_POP(DCPLB_DATA5) - PM_POP(DCPLB_DATA4) - PM_POP(DCPLB_DATA3) - PM_POP(DCPLB_DATA2) - PM_POP(DCPLB_DATA1) - PM_POP(DCPLB_DATA0) - PM_POP(DCPLB_ADDR15) - PM_POP(DCPLB_ADDR14) - PM_POP(DCPLB_ADDR13) - PM_POP(DCPLB_ADDR12) - PM_POP(DCPLB_ADDR11) - PM_POP(DCPLB_ADDR10) - PM_POP(DCPLB_ADDR9) - PM_POP(DCPLB_ADDR8) - PM_POP(DCPLB_ADDR7) - PM_POP(DCPLB_ADDR6) - PM_POP(DCPLB_ADDR5) - PM_POP(DCPLB_ADDR4) - PM_POP(DCPLB_ADDR3) - PM_POP(DCPLB_ADDR2) - PM_POP(DCPLB_ADDR1) - PM_POP(DCPLB_ADDR0) - PM_POP(DMEM_CONTROL) - - /* Restore System MMRs */ - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - PM_SYS_POP16(SYSCR) - -#ifdef PORTCIO_FER - PM_SYS_POP16(PORTEIO_FER) - PM_SYS_POP16(PORTEIO) - PM_SYS_POP16(PORTEIO_INEN) - PM_SYS_POP16(PORTEIO_DIR) - PM_SYS_POP16(PORTDIO_FER) - PM_SYS_POP16(PORTDIO) - PM_SYS_POP16(PORTDIO_INEN) - PM_SYS_POP16(PORTDIO_DIR) - PM_SYS_POP16(PORTCIO_FER) - PM_SYS_POP16(PORTCIO) - PM_SYS_POP16(PORTCIO_INEN) - PM_SYS_POP16(PORTCIO_DIR) -#endif - -#ifdef EBIU_FCTL - PM_SYS_POP(EBIU_FCTL) - PM_SYS_POP(EBIU_MODE) - PM_SYS_POP(EBIU_MBSCTL) -#endif - PM_SYS_POP16(EBIU_AMGCTL) - PM_SYS_POP(EBIU_AMBCTL1) - PM_SYS_POP(EBIU_AMBCTL0) - -#ifdef PINT0_ASSIGN - PM_SYS_POP(PINT3_EDGE_SET) - PM_SYS_POP(PINT2_EDGE_SET) - PM_SYS_POP(PINT1_EDGE_SET) - PM_SYS_POP(PINT0_EDGE_SET) - PM_SYS_POP(PINT3_INVERT_SET) - PM_SYS_POP(PINT2_INVERT_SET) - PM_SYS_POP(PINT1_INVERT_SET) - PM_SYS_POP(PINT0_INVERT_SET) - PM_SYS_POP(PINT3_ASSIGN) - PM_SYS_POP(PINT2_ASSIGN) - PM_SYS_POP(PINT1_ASSIGN) - PM_SYS_POP(PINT0_ASSIGN) - PM_SYS_POP(PINT3_MASK_SET) - PM_SYS_POP(PINT2_MASK_SET) - PM_SYS_POP(PINT1_MASK_SET) - PM_SYS_POP(PINT0_MASK_SET) -#endif - -#ifdef SIC_IWR2 - PM_SYS_POP(SIC_IWR2) -#endif -#ifdef SIC_IWR1 - PM_SYS_POP(SIC_IWR1) -#endif -#ifdef SIC_IWR0 - PM_SYS_POP(SIC_IWR0) -#endif -#ifdef SIC_IWR - PM_SYS_POP(SIC_IWR) -#endif - -#ifdef SIC_IAR8 - PM_SYS_POP(SIC_IAR11) - PM_SYS_POP(SIC_IAR10) - PM_SYS_POP(SIC_IAR9) - PM_SYS_POP(SIC_IAR8) -#endif -#ifdef SIC_IAR7 - PM_SYS_POP(SIC_IAR7) -#endif -#ifdef SIC_IAR6 - PM_SYS_POP(SIC_IAR6) - PM_SYS_POP(SIC_IAR5) - PM_SYS_POP(SIC_IAR4) -#endif -#ifdef SIC_IAR3 - PM_SYS_POP(SIC_IAR3) -#endif -#ifdef SIC_IAR0 - PM_SYS_POP(SIC_IAR2) - PM_SYS_POP(SIC_IAR1) - PM_SYS_POP(SIC_IAR0) -#endif -#ifdef SIC_IMASK - PM_SYS_POP(SIC_IMASK) -#endif -#ifdef SIC_IMASK2 - PM_SYS_POP(SIC_IMASK2) -#endif -#ifdef SIC_IMASK1 - PM_SYS_POP(SIC_IMASK1) -#endif -#ifdef SIC_IMASK0 - PM_SYS_POP(SIC_IMASK0) -#endif + (R7:0, P5:0) = [sp++]; [--sp] = RETI; /* Clear Global Interrupt Disable */ SP += 4; - RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; RTS; ENDPROC(_do_hibernate) diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 76de572..8b4d988 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -85,37 +85,25 @@ ENTRY(__start) SSYNC; /* in case of double faults, save a few things */ - p0.l = _init_retx; - p0.h = _init_retx; - R0 = RETX; - [P0] = R0; - + p1.l = _initial_pda; + p1.h = _initial_pda; + r4 = RETX; #ifdef CONFIG_DEBUG_DOUBLEFAULT /* Only save these if we are storing them, * This happens here, since L1 gets clobbered * below */ GET_PDA(p0, r0); - r5 = [p0 + PDA_DF_RETX]; - p1.l = _init_saved_retx; - p1.h = _init_saved_retx; - [p1] = r5; - - r5 = [p0 + PDA_DF_DCPLB]; - p1.l = _init_saved_dcplb_fault_addr; - p1.h = _init_saved_dcplb_fault_addr; - [p1] = r5; - - r5 = [p0 + PDA_DF_ICPLB]; - p1.l = _init_saved_icplb_fault_addr; - p1.h = _init_saved_icplb_fault_addr; - [p1] = r5; - - r5 = [p0 + PDA_DF_SEQSTAT]; - p1.l = _init_saved_seqstat; - p1.h = _init_saved_seqstat; - [p1] = r5; + r0 = [p0 + PDA_DF_RETX]; + r1 = [p0 + PDA_DF_DCPLB]; + r2 = [p0 + PDA_DF_ICPLB]; + r3 = [p0 + PDA_DF_SEQSTAT]; + [p1 + PDA_INIT_DF_RETX] = r0; + [p1 + PDA_INIT_DF_DCPLB] = r1; + [p1 + PDA_INIT_DF_ICPLB] = r2; + [p1 + PDA_INIT_DF_SEQSTAT] = r3; #endif + [p1 + PDA_INIT_RETX] = r4; /* Initialize stack pointer */ sp.l = _init_thread_union + THREAD_SIZE; diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1177369..332dace 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -444,7 +444,7 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); extern void bfin_gpio_irq_prepare(unsigned gpio); -#if !defined(CONFIG_BF54x) +#if !BFIN_GPIO_PINT static void bfin_gpio_ack_irq(struct irq_data *d) { @@ -633,7 +633,7 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, bfin_demux_gpio_block(irq); } -#else /* CONFIG_BF54x */ +#else #define NR_PINT_SYS_IRQS 4 #define NR_PINT_BITS 32 @@ -647,24 +647,11 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, static unsigned char irq2pint_lut[NR_PINTS]; static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; -struct pin_int_t { - unsigned int mask_set; - unsigned int mask_clear; - unsigned int request; - unsigned int assign; - unsigned int edge_set; - unsigned int edge_clear; - unsigned int invert_set; - unsigned int invert_clear; - unsigned int pinstate; - unsigned int latch; -}; - -static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { - (struct pin_int_t *)PINT0_MASK_SET, - (struct pin_int_t *)PINT1_MASK_SET, - (struct pin_int_t *)PINT2_MASK_SET, - (struct pin_int_t *)PINT3_MASK_SET, +static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = { + (struct bfin_pint_regs *)PINT0_MASK_SET, + (struct bfin_pint_regs *)PINT1_MASK_SET, + (struct bfin_pint_regs *)PINT2_MASK_SET, + (struct bfin_pint_regs *)PINT3_MASK_SET, }; inline unsigned int get_irq_base(u32 bank, u8 bmap) @@ -981,7 +968,7 @@ int __init init_arch_irq(void) local_irq_disable(); -#ifdef CONFIG_BF54x +#if BFIN_GPIO_PINT # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; pint[1]->assign = CONFIG_PINT1_ASSIGN; @@ -999,16 +986,16 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#if defined(BF537_FAMILY) - case IRQ_PH_INTA_MAC_RX: - case IRQ_PF_INTA_PG_INTA: -#elif defined(BF533_FAMILY) - case IRQ_PROG_INTA: -#elif defined(CONFIG_BF54x) +#if BFIN_GPIO_PINT case IRQ_PINT0: case IRQ_PINT1: case IRQ_PINT2: case IRQ_PINT3: +#elif defined(BF537_FAMILY) + case IRQ_PH_INTA_MAC_RX: + case IRQ_PF_INTA_PG_INTA: +#elif defined(BF533_FAMILY) + case IRQ_PROG_INTA: #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) case IRQ_PORTF_INTA: case IRQ_PORTG_INTA: diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 35e7e1e..1c143a4 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -45,9 +45,7 @@ struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); unsigned long blackfin_iflush_l1_entry[NR_CPUS]; #endif -void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb, - *init_saved_seqstat_coreb, *init_saved_icplb_fault_addr_coreb, - *init_saved_dcplb_fault_addr_coreb; +struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; #define BFIN_IPI_RESCHEDULE 0 #define BFIN_IPI_CALL_FUNC 1 @@ -369,13 +367,16 @@ void __cpuinit secondary_start_kernel(void) if (_bfin_swrst & SWRST_DBL_FAULT_B) { printk(KERN_EMERG "CoreB Recovering from DOUBLE FAULT event\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT - printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n", - (int)init_saved_seqstat_coreb & SEQSTAT_EXCAUSE, init_saved_retx_coreb); - printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr_coreb); - printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr_coreb); + printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n", + initial_pda_coreb.seqstat_doublefault & SEQSTAT_EXCAUSE, + initial_pda_coreb.retx_doublefault); + printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", + initial_pda_coreb.dcplb_doublefault_addr); + printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", + initial_pda_coreb.icplb_doublefault_addr); #endif printk(KERN_NOTICE " The instruction at %pF caused a double exception\n", - init_retx_coreb); + initial_pda_coreb.retx); } /* |