diff options
author | Pekka Enberg <penberg@cs.helsinki.fi> | 2008-10-21 12:14:58 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-10-22 09:56:39 -0700 |
commit | dc7e04fe28e3354e8b2e13146b2d6a5da1002ff4 (patch) | |
tree | c225a39f02c7a346a030192c9968193736423e51 | |
parent | a1eb2ba6be72988b2479f749acfdc3bdce41654b (diff) | |
download | op-kernel-dev-dc7e04fe28e3354e8b2e13146b2d6a5da1002ff4.zip op-kernel-dev-dc7e04fe28e3354e8b2e13146b2d6a5da1002ff4.tar.gz |
Staging: w35und: use gotos for error handling
The driver code uses do { } while (0) together with the break statement to
emulate gotos for error handling. Fix that up by using the goto statement
instead.
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r-- | drivers/staging/winbond/linux/wb35rx.c | 161 | ||||
-rw-r--r-- | drivers/staging/winbond/linux/wb35tx.c | 130 | ||||
-rw-r--r-- | drivers/staging/winbond/linux/wbusb.c | 161 | ||||
-rw-r--r-- | drivers/staging/winbond/wblinux.c | 188 |
4 files changed, 313 insertions, 327 deletions
diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c index c5c3317..b4b9f5f 100644 --- a/drivers/staging/winbond/linux/wb35rx.c +++ b/drivers/staging/winbond/linux/wb35rx.c @@ -35,51 +35,50 @@ void Wb35Rx( phw_data_t pHwData ) // // Issuing URB // - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Get RxBuffer's ID - RxBufferId = pWb35Rx->RxBufferId; - if (!pWb35Rx->RxOwner[RxBufferId]) { - // It's impossible to run here. - #ifdef _PE_RX_DUMP_ - WBDEBUG(("Rx driver fifo unavailable\n")); - #endif - break; - } + // Get RxBuffer's ID + RxBufferId = pWb35Rx->RxBufferId; + if (!pWb35Rx->RxOwner[RxBufferId]) { + // It's impossible to run here. + #ifdef _PE_RX_DUMP_ + WBDEBUG(("Rx driver fifo unavailable\n")); + #endif + goto error; + } - // Update buffer point, then start to bulkin the data from USB - pWb35Rx->RxBufferId++; - pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; + // Update buffer point, then start to bulkin the data from USB + pWb35Rx->RxBufferId++; + pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; - pWb35Rx->CurrentRxBufferId = RxBufferId; + pWb35Rx->CurrentRxBufferId = RxBufferId; - if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { - printk("w35und: Rx memory alloc failed\n"); - break; - } - pRxBufferAddress = pWb35Rx->pDRx; + if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { + printk("w35und: Rx memory alloc failed\n"); + goto error; + } + pRxBufferAddress = pWb35Rx->pDRx; - usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, - usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), - pRxBufferAddress, MAX_USB_RX_BUFFER, - Wb35Rx_Complete, pHwData); + usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, + usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), + pRxBufferAddress, MAX_USB_RX_BUFFER, + Wb35Rx_Complete, pHwData); - pWb35Rx->EP3vm_state = VM_RUNNING; + pWb35Rx->EP3vm_state = VM_RUNNING; - retv = wb_usb_submit_urb(pUrb); + retv = wb_usb_submit_urb(pUrb); - if (retv != 0) { - printk("Rx URB sending error\n"); - break; - } - return; - } while(FALSE); + if (retv != 0) { + printk("Rx URB sending error\n"); + goto error; + } + return; +error: // VM stop pWb35Rx->EP3vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); @@ -99,65 +98,63 @@ void Wb35Rx_Complete(PURB pUrb) pWb35Rx->EP3vm_state = VM_COMPLETED; pWb35Rx->EP3VM_status = pUrb->status;//Store the last result of Irp - do { - RxBufferId = pWb35Rx->CurrentRxBufferId; + RxBufferId = pWb35Rx->CurrentRxBufferId; - pRxBufferAddress = pWb35Rx->pDRx; - BulkLength = (u16)pUrb->actual_length; + pRxBufferAddress = pWb35Rx->pDRx; + BulkLength = (u16)pUrb->actual_length; - // The IRP is completed - pWb35Rx->EP3vm_state = VM_COMPLETED; + // The IRP is completed + pWb35Rx->EP3vm_state = VM_COMPLETED; - if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Start to process the data only in successful condition - pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver - R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); + // Start to process the data only in successful condition + pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver + R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); - // The URB is completed, check the result - if (pWb35Rx->EP3VM_status != 0) { - #ifdef _PE_USB_STATE_DUMP_ - WBDEBUG(("EP3 IoCompleteRoutine return error\n")); - DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); - #endif - pWb35Rx->EP3vm_state = VM_STOP; - break; - } + // The URB is completed, check the result + if (pWb35Rx->EP3VM_status != 0) { + #ifdef _PE_USB_STATE_DUMP_ + WBDEBUG(("EP3 IoCompleteRoutine return error\n")); + DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); + #endif + pWb35Rx->EP3vm_state = VM_STOP; + goto error; + } - // 20060220 For recovering. check if operating in single USB mode - if (!HAL_USB_MODE_BURST(pHwData)) { - SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian - if ((SizeCheck & 0x03) > 0) - SizeCheck -= 4; - SizeCheck = (SizeCheck + 3) & ~0x03; - SizeCheck += 12; // 8 + 4 badbeef - if ((BulkLength > 1600) || - (SizeCheck > 1600) || - (BulkLength != SizeCheck) || - (BulkLength == 0)) { // Add for fail Urb - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->Ep3ErrorCount2++; - } + // 20060220 For recovering. check if operating in single USB mode + if (!HAL_USB_MODE_BURST(pHwData)) { + SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian + if ((SizeCheck & 0x03) > 0) + SizeCheck -= 4; + SizeCheck = (SizeCheck + 3) & ~0x03; + SizeCheck += 12; // 8 + 4 badbeef + if ((BulkLength > 1600) || + (SizeCheck > 1600) || + (BulkLength != SizeCheck) || + (BulkLength == 0)) { // Add for fail Urb + pWb35Rx->EP3vm_state = VM_STOP; + pWb35Rx->Ep3ErrorCount2++; } + } - // Indicating the receiving data - pWb35Rx->ByteReceived += BulkLength; - pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - - if (!pWb35Rx->RxOwner[ RxBufferId ]) - Wb35Rx_indicate(pHwData); + // Indicating the receiving data + pWb35Rx->ByteReceived += BulkLength; + pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - kfree(pWb35Rx->pDRx); - // Do the next receive - Wb35Rx(pHwData); - return; + if (!pWb35Rx->RxOwner[ RxBufferId ]) + Wb35Rx_indicate(pHwData); - } while(FALSE); + kfree(pWb35Rx->pDRx); + // Do the next receive + Wb35Rx(pHwData); + return; +error: pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); pWb35Rx->EP3vm_state = VM_STOP; diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c index bcb014a..ba9d512 100644 --- a/drivers/staging/winbond/linux/wb35tx.c +++ b/drivers/staging/winbond/linux/wb35tx.c @@ -100,25 +100,24 @@ void Wb35Tx_complete(struct urb * pUrb) pWb35Tx->TxSendIndex++; pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; - if (pWb35Tx->tx_halt) - break; + if (pWb35Tx->tx_halt) + goto error; - // The URB is completed, check the result - if (pWb35Tx->EP4VM_status != 0) { - printk("URB submission failed\n"); - pWb35Tx->EP4vm_state = VM_STOP; - break; // Exit while(FALSE); - } + // The URB is completed, check the result + if (pWb35Tx->EP4VM_status != 0) { + printk("URB submission failed\n"); + pWb35Tx->EP4vm_state = VM_STOP; + goto error; + } - Mds_Tx(Adapter); - Wb35Tx(pHwData); - return; - } while(FALSE); + Mds_Tx(Adapter); + Wb35Tx(pHwData); + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxFireCounter ); pWb35Tx->EP4vm_state = VM_STOP; } @@ -228,33 +227,30 @@ void Wb35Tx_EP2VM(phw_data_t pHwData) u32 * pltmp = (u32 *)pWb35Tx->EP2_buf; int retv; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; - - if (pWb35Tx->tx_halt) - break; - - // - // Issuing URB - // - usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), - pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - pWb35Tx->EP2vm_state = VM_RUNNING; - retv = wb_usb_submit_urb( pUrb ); + if (pWb35Tx->tx_halt) + goto error; - if(retv < 0) { - #ifdef _PE_TX_DUMP_ - WBDEBUG(("EP2 Tx Irp sending error\n")); - #endif - break; - } + // + // Issuing URB + // + usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), + pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); - return; + pWb35Tx->EP2vm_state = VM_RUNNING; + retv = wb_usb_submit_urb( pUrb ); - } while(FALSE); + if (retv < 0) { + #ifdef _PE_TX_DUMP_ + WBDEBUG(("EP2 Tx Irp sending error\n")); + #endif + goto error; + } + return; +error: pWb35Tx->EP2vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); } @@ -275,38 +271,36 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb) pWb35Tx->EP2vm_state = VM_COMPLETED; pWb35Tx->EP2VM_status = pUrb->status; - do { - // For Linux 2.4. Interrupt will always trigger - if( pHwData->SurpriseRemove || pHwData->HwStop ) // Let WbWlanHalt to handle surprise remove - break; - - if( pWb35Tx->tx_halt ) - break; - - //The Urb is completed, check the result - if (pWb35Tx->EP2VM_status != 0) { - WBDEBUG(("EP2 IoCompleteRoutine return error\n")); - pWb35Tx->EP2vm_state= VM_STOP; - break; // Exit while(FALSE); - } - - // Update the Tx result - InterruptInLength = pUrb->actual_length; - // Modify for minimum memory access and DWORD alignment. - T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] - InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable - InterruptInLength >>= 2; // InterruptInLength/4 - for (i=1; i<=InterruptInLength; i++) { - T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); - - TSTATUS.value = T02.value; //20061009 anson's endian - Mds_SendComplete( Adapter, &TSTATUS ); - T02.value = cpu_to_le32(pltmp[i]) >> 8; - } - - return; - } while(FALSE); + // For Linux 2.4. Interrupt will always trigger + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; + + if (pWb35Tx->tx_halt) + goto error; + + //The Urb is completed, check the result + if (pWb35Tx->EP2VM_status != 0) { + WBDEBUG(("EP2 IoCompleteRoutine return error\n")); + pWb35Tx->EP2vm_state= VM_STOP; + goto error; + } + // Update the Tx result + InterruptInLength = pUrb->actual_length; + // Modify for minimum memory access and DWORD alignment. + T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] + InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable + InterruptInLength >>= 2; // InterruptInLength/4 + for (i = 1; i <= InterruptInLength; i++) { + T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); + + TSTATUS.value = T02.value; //20061009 anson's endian + Mds_SendComplete( Adapter, &TSTATUS ); + T02.value = cpu_to_le32(pltmp[i]) >> 8; + } + + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); pWb35Tx->EP2vm_state = VM_STOP; } diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c index ee9f471..e09b272 100644 --- a/drivers/staging/winbond/linux/wbusb.c +++ b/drivers/staging/winbond/linux/wbusb.c @@ -218,114 +218,111 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) printk("[w35und]wb35_probe ->\n"); - do { - for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) { - if ((udev->descriptor.idVendor == Id_Table[i].idVendor) && - (udev->descriptor.idProduct == Id_Table[i].idProduct)) { - printk("[w35und]Found supported hardware\n"); - break; - } - } - if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) { - #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und] This is not the one we are interested about\n")); - #endif - return -ENODEV; + for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) { + if ((udev->descriptor.idVendor == Id_Table[i].idVendor) && + (udev->descriptor.idProduct == Id_Table[i].idProduct)) { + printk("[w35und]Found supported hardware\n"); + break; } + } - // 20060630.2 Check the device if it already be opened - ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), - 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ*100 ); - if( ret < 0 ) - break; + if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) { + #ifdef _PE_USB_INI_DUMP_ + WBDEBUG(("[w35und] This is not the one we are interested about\n")); + #endif + return -ENODEV; + } - ltmp = cpu_to_le32(ltmp); - if (ltmp) // Is already initialized? - break; + // 20060630.2 Check the device if it already be opened + ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), + 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, + 0x0, 0x400, <mp, 4, HZ*100 ); + if (ret < 0) + goto error; + ltmp = cpu_to_le32(ltmp); + if (ltmp) // Is already initialized? + goto error; - Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); + Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); - my_adapter = Adapter; - pWbLinux = &Adapter->WbLinux; - pWbUsb = &Adapter->sHwData.WbUsb; - pWbUsb->udev = udev; + my_adapter = Adapter; + pWbLinux = &Adapter->WbLinux; + pWbUsb = &Adapter->sHwData.WbUsb; + pWbUsb->udev = udev; - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; - if (endpoint[2].wMaxPacketSize == 512) { - printk("[w35und] Working on USB 2.0\n"); - pWbUsb->IsUsb20 = 1; - } + if (endpoint[2].wMaxPacketSize == 512) { + printk("[w35und] Working on USB 2.0\n"); + pWbUsb->IsUsb20 = 1; + } - if (!WbWLanInitialize(Adapter)) { - printk("[w35und]WbWLanInitialize fail\n"); - break; - } + if (!WbWLanInitialize(Adapter)) { + printk("[w35und]WbWLanInitialize fail\n"); + goto error; + } - { - struct wbsoft_priv *priv; - struct ieee80211_hw *dev; - int res; + { + struct wbsoft_priv *priv; + struct ieee80211_hw *dev; + int res; - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); + dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - if (!dev) { - printk("w35und: ieee80211 alloc failed\n" ); - BUG(); - } + if (!dev) { + printk("w35und: ieee80211 alloc failed\n" ); + BUG(); + } - my_dev = dev; + my_dev = dev; - SET_IEEE80211_DEV(dev, &udev->dev); - { - phw_data_t pHwData = &Adapter->sHwData; - unsigned char dev_addr[MAX_ADDR_LEN]; - hal_get_permanent_address(pHwData, dev_addr); - SET_IEEE80211_PERM_ADDR(dev, dev_addr); - } + SET_IEEE80211_DEV(dev, &udev->dev); + { + phw_data_t pHwData = &Adapter->sHwData; + unsigned char dev_addr[MAX_ADDR_LEN]; + hal_get_permanent_address(pHwData, dev_addr); + SET_IEEE80211_PERM_ADDR(dev, dev_addr); + } - dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = 0; + dev->extra_tx_headroom = 12; /* FIXME */ + dev->flags = 0; - dev->channel_change_time = 1000; -// dev->max_rssi = 100; + dev->channel_change_time = 1000; +// dev->max_rssi = 100; - dev->queues = 1; + dev->queues = 1; - static struct ieee80211_supported_band band; + static struct ieee80211_supported_band band; - band.channels = wbsoft_channels; - band.n_channels = ARRAY_SIZE(wbsoft_channels); - band.bitrates = wbsoft_rates; - band.n_bitrates = ARRAY_SIZE(wbsoft_rates); + band.channels = wbsoft_channels; + band.n_channels = ARRAY_SIZE(wbsoft_channels); + band.bitrates = wbsoft_rates; + band.n_bitrates = ARRAY_SIZE(wbsoft_rates); - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; #if 0 - wbsoft_modes[0].num_channels = 1; - wbsoft_modes[0].channels = wbsoft_channels; - wbsoft_modes[0].mode = MODE_IEEE80211B; - wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); - wbsoft_modes[0].rates = wbsoft_rates; - - res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); - BUG_ON(res); + wbsoft_modes[0].num_channels = 1; + wbsoft_modes[0].channels = wbsoft_channels; + wbsoft_modes[0].mode = MODE_IEEE80211B; + wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); + wbsoft_modes[0].rates = wbsoft_rates; + + res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); + BUG_ON(res); #endif - res = ieee80211_register_hw(dev); - BUG_ON(res); - } - - usb_set_intfdata( intf, Adapter ); - - printk("[w35und] _probe OK\n"); - return 0; + res = ieee80211_register_hw(dev); + BUG_ON(res); + } - } while(FALSE); + usb_set_intfdata( intf, Adapter ); + printk("[w35und] _probe OK\n"); + return 0; +error: return -ENOMEM; } diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c index 186ad60..4ed45e4 100644 --- a/drivers/staging/winbond/wblinux.c +++ b/drivers/staging/winbond/wblinux.c @@ -147,114 +147,112 @@ WbWLanInitialize(PADAPTER Adapter) u8 EEPROM_region; u8 HwRadioOff; - do { - // - // Setting default value for Linux - // - Adapter->sLocalPara.region_INF = REGION_AUTO; - Adapter->sLocalPara.TxRateMode = RATE_AUTO; - psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode - Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; - Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); - Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; - psLOCAL->bPreambleMode = AUTO_MODE; - Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; - pHwData = &Adapter->sHwData; - hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); - - // - // Initial each module and variable - // - if (!WBLINUX_Initial(Adapter)) { + // + // Setting default value for Linux + // + Adapter->sLocalPara.region_INF = REGION_AUTO; + Adapter->sLocalPara.TxRateMode = RATE_AUTO; + psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode + Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; + Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; + hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); + Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; + psLOCAL->bPreambleMode = AUTO_MODE; + Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; + pHwData = &Adapter->sHwData; + hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); + + // + // Initial each module and variable + // + if (!WBLINUX_Initial(Adapter)) { #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und]WBNDIS initialization failed\n")); + WBDEBUG(("[w35und]WBNDIS initialization failed\n")); #endif - break; - } + goto error; + } - // Initial Software variable - Adapter->sLocalPara.ShutDowned = FALSE; - - //added by ws for wep key error detection - Adapter->sLocalPara.bWepKeyError= FALSE; - Adapter->sLocalPara.bToSelfPacketReceived = FALSE; - Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds - - // Initial USB hal - InitStep = 1; - pHwData = &Adapter->sHwData; - if (!hal_init_hardware(pHwData, Adapter)) - break; - - EEPROM_region = hal_get_region_from_EEPROM( pHwData ); - if (EEPROM_region != REGION_AUTO) - psLOCAL->region = EEPROM_region; - else { - if (psLOCAL->region_INF != REGION_AUTO) - psLOCAL->region = psLOCAL->region_INF; - else - psLOCAL->region = REGION_USA; //default setting - } + // Initial Software variable + Adapter->sLocalPara.ShutDowned = FALSE; + + //added by ws for wep key error detection + Adapter->sLocalPara.bWepKeyError= FALSE; + Adapter->sLocalPara.bToSelfPacketReceived = FALSE; + Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds + + // Initial USB hal + InitStep = 1; + pHwData = &Adapter->sHwData; + if (!hal_init_hardware(pHwData, Adapter)) + goto error; + + EEPROM_region = hal_get_region_from_EEPROM( pHwData ); + if (EEPROM_region != REGION_AUTO) + psLOCAL->region = EEPROM_region; + else { + if (psLOCAL->region_INF != REGION_AUTO) + psLOCAL->region = psLOCAL->region_INF; + else + psLOCAL->region = REGION_USA; //default setting + } - // Get Software setting flag from hal - Adapter->sLocalPara.boAntennaDiversity = FALSE; - if (hal_software_set(pHwData) & 0x00000001) - Adapter->sLocalPara.boAntennaDiversity = TRUE; - - // - // For TS module - // - InitStep = 2; - - // For MDS module - InitStep = 3; - Mds_initial(Adapter); - - //======================================= - // Initialize the SME, SCAN, MLME, ROAM - //======================================= - InitStep = 4; - InitStep = 5; - InitStep = 6; - - // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. - pMacAddr = Adapter->sLocalPara.ThisMacAddress; - pMacAddr2 = Adapter->sLocalPara.PermanentAddress; - hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM - if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal - { - memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); - } else { - // Set the user define MAC address - hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); - } + // Get Software setting flag from hal + Adapter->sLocalPara.boAntennaDiversity = FALSE; + if (hal_software_set(pHwData) & 0x00000001) + Adapter->sLocalPara.boAntennaDiversity = TRUE; + + // + // For TS module + // + InitStep = 2; + + // For MDS module + InitStep = 3; + Mds_initial(Adapter); + + //======================================= + // Initialize the SME, SCAN, MLME, ROAM + //======================================= + InitStep = 4; + InitStep = 5; + InitStep = 6; + + // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. + pMacAddr = Adapter->sLocalPara.ThisMacAddress; + pMacAddr2 = Adapter->sLocalPara.PermanentAddress; + hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM + if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal + { + memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); + } else { + // Set the user define MAC address + hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); + } - //get current antenna - psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); + //get current antenna + psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); #ifdef _PE_STATE_DUMP_ - WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); + WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); #endif - hal_get_hw_radio_off( pHwData ); + hal_get_hw_radio_off( pHwData ); - // Waiting for HAL setting OK - while (!hal_idle(pHwData)) - OS_SLEEP(10000); + // Waiting for HAL setting OK + while (!hal_idle(pHwData)) + OS_SLEEP(10000); - MTO_Init(Adapter); + MTO_Init(Adapter); - HwRadioOff = hal_get_hw_radio_off( pHwData ); - psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; + HwRadioOff = hal_get_hw_radio_off( pHwData ); + psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; - hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); + hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); - hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. - //set a tx power for reference..... -// sme_set_tx_power_level(Adapter, 12); FIXME? - return TRUE; - } - while(FALSE); + hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. + //set a tx power for reference..... +// sme_set_tx_power_level(Adapter, 12); FIXME? + return TRUE; +error: switch (InitStep) { case 5: case 4: |