summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMatthew Wilcox <matthew@wil.cx>2007-07-30 09:18:45 -0600
committerJames Bottomley <jejb@mulgrave.localdomain>2007-10-12 14:39:04 -0400
commitc304ec94733aec764396813f3f05dfbe02f4a6da (patch)
treec5a78774826e19ef84ad0f79558a533077a4f90e
parentb09e05a73e8308397371edc15b7d45082971fa95 (diff)
downloadop-kernel-dev-c304ec94733aec764396813f3f05dfbe02f4a6da.zip
op-kernel-dev-c304ec94733aec764396813f3f05dfbe02f4a6da.tar.gz
[SCSI] advansys: Convert to ISA driver model
Register two isa_drivers, one for ISA and one for VLB, in order to preserve detection order. When deleting advansys_detect, we lose the last vestiges of the code that limited IO port scanning. This code has been effectively disabled for many years anyway; I'll restore it in a module_param later. We also lose the code that placed all ISA PnP cards into WaitForKey state -- drivers shouldn't be doing this anyway. The asc_host array goes away too. Also remove some IOADR and other definitions, such as ASC_NUM_BOARD_SUPPORTED. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-rw-r--r--drivers/scsi/advansys.c412
1 files changed, 113 insertions, 299 deletions
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index e096f19..eda41f2 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -280,7 +280,7 @@
AdvanSys SCSI adapter files have the following path name format:
- /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)]
+ /proc/scsi/advansys/{0,1,2,3,...}
This information can be displayed with cat. For example:
@@ -769,6 +769,7 @@
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/isa.h>
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
@@ -1362,18 +1363,6 @@ typedef struct asc_risc_sg_list_q {
#define ASC_MAX_INRAM_TAG_QNG 16
#define ASC_IOADR_TABLE_MAX_IX 11
#define ASC_IOADR_GAP 0x10
-#define ASC_SEARCH_IOP_GAP 0x10
-#define ASC_MIN_IOP_ADDR (PortAddr)0x0100
-#define ASC_MAX_IOP_ADDR (PortAddr)0x3F0
-#define ASC_IOADR_1 (PortAddr)0x0110
-#define ASC_IOADR_2 (PortAddr)0x0130
-#define ASC_IOADR_3 (PortAddr)0x0150
-#define ASC_IOADR_4 (PortAddr)0x0190
-#define ASC_IOADR_5 (PortAddr)0x0210
-#define ASC_IOADR_6 (PortAddr)0x0230
-#define ASC_IOADR_7 (PortAddr)0x0250
-#define ASC_IOADR_8 (PortAddr)0x0330
-#define ASC_IOADR_DEF ASC_IOADR_8
#define ASC_LIB_SCSIQ_WK_SP 256
#define ASC_MAX_SYN_XFER_NO 16
#define ASC_SYN_MAX_OFFSET 0x0F
@@ -1934,9 +1923,6 @@ static int AscIsrQDone(ASC_DVC_VAR *);
static int AscCompareString(uchar *, uchar *, int);
#ifdef CONFIG_ISA
static ushort AscGetEisaChipCfg(PortAddr);
-static PortAddr AscSearchIOPortAddr11(PortAddr);
-static PortAddr AscSearchIOPortAddr(PortAddr, ushort);
-static void AscSetISAPNPWaitForKey(void);
#endif /* CONFIG_ISA */
static uchar AscGetChipScsiCtrl(PortAddr);
static uchar AscSetChipScsiID(PortAddr, uchar);
@@ -3405,10 +3391,6 @@ typedef struct {
* --- Driver Constants and Macros
*/
-#define ASC_NUM_BOARD_SUPPORTED 16
-#define ASC_NUM_IOPORT_PROBE 4
-#define ASC_NUM_BUS 2
-
/* Reference Scsi_Host hostdata */
#define ASC_BOARDP(host) ((asc_board_t *) &((host)->hostdata))
@@ -3836,10 +3818,6 @@ typedef struct asc_board {
/* Number of boards detected in system. */
static int asc_board_count;
-/* Number of boards detected by advansys_detect */
-static int asc_legacy_count;
-static struct Scsi_Host *asc_host[ASC_NUM_BOARD_SUPPORTED] = { NULL };
-
/* Overrun buffer used by all narrow boards. */
static uchar overrun_buf[ASC_OVERRUN_BSIZE] = { 0 };
@@ -3849,27 +3827,10 @@ static uchar overrun_buf[ASC_OVERRUN_BSIZE] = { 0 };
static ASC_SCSI_Q asc_scsi_q = { {0} };
static ASC_SG_HEAD asc_sg_head = { 0 };
-/* List of bus types probed in advansys_detect. */
-static ushort asc_bus[ASC_NUM_BUS] __initdata = {
- ASC_IS_ISA,
- ASC_IS_VL,
-};
-
-static int asc_iopflag = ASC_FALSE;
-static int asc_ioport[ASC_NUM_IOPORT_PROBE] = { 0, 0, 0, 0 };
-
#ifdef ADVANSYS_DEBUG
-static char *asc_bus_name[ASC_NUM_BUS] = {
- "ASC_IS_ISA",
- "ASC_IS_VL",
-};
-
static int asc_dbglvl = 3;
#endif /* ADVANSYS_DEBUG */
-/* Declaration for Asc Library internal data referenced by driver. */
-static PortAddr _asc_def_iop_base[];
-
/*
* --- Driver Function Prototypes
*
@@ -3932,7 +3893,7 @@ static void asc_prt_hex(char *f, uchar *, int);
#ifdef CONFIG_PROC_FS
/*
- * advansys_proc_info() - /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)]
+ * advansys_proc_info() - /proc/scsi/advansys/{0,1,2,3,...}
*
* *buffer: I/O buffer
* **start: if inout == FALSE pointer into buffer where user read should start
@@ -8196,77 +8157,6 @@ static int AscFindSignature(PortAddr iop_base)
return (0);
}
-static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __initdata = {
- 0x100, ASC_IOADR_1, 0x120, ASC_IOADR_2, 0x140, ASC_IOADR_3, ASC_IOADR_4,
- ASC_IOADR_5, ASC_IOADR_6, ASC_IOADR_7, ASC_IOADR_8
-};
-
-#ifdef CONFIG_ISA
-static uchar _isa_pnp_inited __initdata = 0;
-
-static PortAddr __init AscSearchIOPortAddr(PortAddr iop_beg, ushort bus_type)
-{
- if (bus_type & ASC_IS_VL) {
- while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) {
- if (AscGetChipVersion(iop_beg, bus_type) <=
- ASC_CHIP_MAX_VER_VL) {
- return (iop_beg);
- }
- }
- return (0);
- }
- if (bus_type & ASC_IS_ISA) {
- if (_isa_pnp_inited == 0) {
- AscSetISAPNPWaitForKey();
- _isa_pnp_inited++;
- }
- while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) {
- if ((AscGetChipVersion(iop_beg, bus_type) &
- ASC_CHIP_VER_ISA_BIT) != 0) {
- return (iop_beg);
- }
- }
- return (0);
- }
- return (0);
-}
-
-static PortAddr __init AscSearchIOPortAddr11(PortAddr s_addr)
-{
- int i;
- PortAddr iop_base;
-
- for (i = 0; i < ASC_IOADR_TABLE_MAX_IX; i++) {
- if (_asc_def_iop_base[i] > s_addr) {
- break;
- }
- }
- for (; i < ASC_IOADR_TABLE_MAX_IX; i++) {
- iop_base = _asc_def_iop_base[i];
- if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) {
- ASC_DBG1(1,
- "AscSearchIOPortAddr11: check_region() failed I/O port 0x%x\n",
- iop_base);
- continue;
- }
- ASC_DBG1(1, "AscSearchIOPortAddr11: probing I/O port 0x%x\n",
- iop_base);
- release_region(iop_base, ASC_IOADR_GAP);
- if (AscFindSignature(iop_base)) {
- return (iop_base);
- }
- }
- return (0);
-}
-
-static void __init AscSetISAPNPWaitForKey(void)
-{
- outp(ASC_ISA_PNP_PORT_ADDR, 0x02);
- outp(ASC_ISA_PNP_PORT_WRITE, 0x02);
- return;
-}
-#endif /* CONFIG_ISA */
-
static void __devinit AscToggleIRQAct(PortAddr iop_base)
{
AscSetChipStatus(iop_base, CIW_IRQ_ACT);
@@ -18389,181 +18279,6 @@ advansys_board_found(int iop, struct device *dev, int bus_type)
}
/*
- * advansys_detect()
- *
- * Detect function for AdvanSys adapters.
- *
- * Argument is a pointer to the host driver's scsi_hosts entry.
- *
- * Return number of adapters found.
- *
- * Note: Because this function is called during system initialization
- * it must not call SCSI mid-level functions including scsi_malloc()
- * and scsi_free().
- */
-static int __init advansys_detect(void)
-{
- int iop;
- int bus;
- int ioport = 0;
- struct Scsi_Host *shost;
-
- ASC_DBG(1, "advansys_detect: begin\n");
-
- asc_legacy_count = 0;
-
- /*
- * If I/O port probing has been modified, then verify and
- * clean-up the 'asc_ioport' list.
- */
- if (asc_iopflag == ASC_TRUE) {
- for (ioport = 0; ioport < ASC_NUM_IOPORT_PROBE; ioport++) {
- ASC_DBG2(1, "advansys_detect: asc_ioport[%d] 0x%x\n",
- ioport, asc_ioport[ioport]);
- if (asc_ioport[ioport] != 0) {
- for (iop = 0; iop < ASC_IOADR_TABLE_MAX_IX;
- iop++) {
- if (_asc_def_iop_base[iop] ==
- asc_ioport[ioport]) {
- break;
- }
- }
- if (iop == ASC_IOADR_TABLE_MAX_IX) {
- printk
- ("AdvanSys SCSI: specified I/O Port 0x%X is invalid\n",
- asc_ioport[ioport]);
- asc_ioport[ioport] = 0;
- }
- }
- }
- ioport = 0;
- }
-
- for (bus = 0; bus < ASC_NUM_BUS; bus++) {
-
- ASC_DBG2(1, "advansys_detect: bus search type %d (%s)\n",
- bus, asc_bus_name[bus]);
- iop = 0;
-
- while (asc_legacy_count < ASC_NUM_BOARD_SUPPORTED) {
-
- ASC_DBG1(2, "advansys_detect: asc_legacy_count %d\n",
- asc_legacy_count);
-
- switch (asc_bus[bus]) {
- case ASC_IS_ISA:
- case ASC_IS_VL:
-#ifdef CONFIG_ISA
- if (asc_iopflag == ASC_FALSE) {
- iop =
- AscSearchIOPortAddr(iop,
- asc_bus[bus]);
- } else {
- /*
- * ISA and VL I/O port scanning has either been
- * eliminated or limited to selected ports on
- * the LILO command line, /etc/lilo.conf, or
- * by setting variables when the module was loaded.
- */
- ASC_DBG(1,
- "advansys_detect: I/O port scanning modified\n");
- ioport_try_again:
- iop = 0;
- for (; ioport < ASC_NUM_IOPORT_PROBE;
- ioport++) {
- if ((iop =
- asc_ioport[ioport]) != 0) {
- break;
- }
- }
- if (iop) {
- ASC_DBG1(1,
- "advansys_detect: probing I/O port 0x%x...\n",
- iop);
- if (!request_region
- (iop, ASC_IOADR_GAP,
- "advansys")) {
- printk
- ("AdvanSys SCSI: specified I/O Port 0x%X is busy\n",
- iop);
- /* Don't try this I/O port twice. */
- asc_ioport[ioport] = 0;
- goto ioport_try_again;
- } else if (AscFindSignature(iop)
- == ASC_FALSE) {
- printk
- ("AdvanSys SCSI: specified I/O Port 0x%X has no adapter\n",
- iop);
- /* Don't try this I/O port twice. */
- release_region(iop,
- ASC_IOADR_GAP);
- asc_ioport[ioport] = 0;
- goto ioport_try_again;
- } else {
- /*
- * If this isn't an ISA board, then it must be
- * a VL board. If currently looking an ISA
- * board is being looked for then try for
- * another ISA board in 'asc_ioport'.
- */
- if (asc_bus[bus] ==
- ASC_IS_ISA
- &&
- (AscGetChipVersion
- (iop,
- ASC_IS_ISA) &
- ASC_CHIP_VER_ISA_BIT)
- == 0) {
- /*
- * Don't clear 'asc_ioport[ioport]'. Try
- * this board again for VL. Increment
- * 'ioport' past this board.
- */
- ioport++;
- release_region
- (iop,
- ASC_IOADR_GAP);
- goto ioport_try_again;
- }
- }
- /*
- * This board appears good, don't try the I/O port
- * again by clearing its value. Increment 'ioport'
- * for the next iteration.
- */
- asc_ioport[ioport++] = 0;
- }
- }
-#endif /* CONFIG_ISA */
- break;
-
- default:
- ASC_PRINT1
- ("advansys_detect: unknown bus type: %d\n",
- asc_bus[bus]);
- break;
- }
- ASC_DBG1(1, "advansys_detect: iop 0x%x\n", iop);
-
- /*
- * Adapter not found, try next bus type.
- */
- if (iop == 0)
- break;
-
- shost = advansys_board_found(iop, NULL, asc_bus[bus]);
- if (shost) {
- asc_host[asc_legacy_count++] = shost;
- }
- }
- }
-
- ASC_DBG1(1, "advansys_detect: done: asc_legacy_count %d\n",
- asc_legacy_count);
- return asc_legacy_count;
-}
-
-/*
* advansys_release()
*
* Release resources allocated for a single AdvanSys adapter.
@@ -18591,6 +18306,98 @@ static int advansys_release(struct Scsi_Host *shost)
return 0;
}
+static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __devinitdata = {
+ 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190,
+ 0x0210, 0x0230, 0x0250, 0x0330
+};
+
+static int __devinit advansys_isa_probe(struct device *dev, unsigned int id)
+{
+ PortAddr iop_base = _asc_def_iop_base[id];
+ struct Scsi_Host *shost;
+
+ if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) {
+ ASC_DBG1(1, "advansys_isa_match: check_region() failed "
+ "I/O port 0x%x\n", iop_base);
+ return -ENODEV;
+ }
+ ASC_DBG1(1, "advansys_isa_match: probing I/O port 0x%x\n", iop_base);
+ release_region(iop_base, ASC_IOADR_GAP);
+ if (!AscFindSignature(iop_base))
+ goto nodev;
+ if (!(AscGetChipVersion(iop_base, ASC_IS_ISA) & ASC_CHIP_VER_ISA_BIT))
+ goto nodev;
+
+ shost = advansys_board_found(iop_base, dev, ASC_IS_ISA);
+
+ if (!shost)
+ goto nodev;
+
+ dev_set_drvdata(dev, shost);
+ return 0;
+
+ nodev:
+ return -ENODEV;
+}
+
+static int __devexit advansys_isa_remove(struct device *dev, unsigned int id)
+{
+ advansys_release(dev_get_drvdata(dev));
+ return 0;
+}
+
+static struct isa_driver advansys_isa_driver = {
+ .probe = advansys_isa_probe,
+ .remove = __devexit_p(advansys_isa_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "advansys",
+ },
+};
+
+static int __devinit advansys_vlb_probe(struct device *dev, unsigned int id)
+{
+ PortAddr iop_base = _asc_def_iop_base[id];
+ struct Scsi_Host *shost;
+
+ if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) {
+ ASC_DBG1(1, "advansys_vlb_match: check_region() failed "
+ "I/O port 0x%x\n", iop_base);
+ return -ENODEV;
+ }
+ ASC_DBG1(1, "advansys_vlb_match: probing I/O port 0x%x\n", iop_base);
+ release_region(iop_base, ASC_IOADR_GAP);
+ if (!AscFindSignature(iop_base))
+ goto nodev;
+ /*
+ * I don't think this condition can actually happen, but the old
+ * driver did it, and the chances of finding a VLB setup in 2007
+ * to do testing with is slight to none.
+ */
+ if (AscGetChipVersion(iop_base, ASC_IS_VL) > ASC_CHIP_MAX_VER_VL)
+ goto nodev;
+
+ shost = advansys_board_found(iop_base, dev, ASC_IS_VL);
+
+ if (!shost)
+ goto nodev;
+
+ dev_set_drvdata(dev, shost);
+ return 0;
+
+ nodev:
+ return -ENODEV;
+}
+
+static struct isa_driver advansys_vlb_driver = {
+ .probe = advansys_vlb_probe,
+ .remove = __devexit_p(advansys_isa_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "advansys",
+ },
+};
+
static struct eisa_device_id advansys_eisa_table[] __devinitdata = {
{ "ABP7401" },
{ "ABP7501" },
@@ -18735,13 +18542,22 @@ static struct pci_driver advansys_pci_driver = {
static int __init advansys_init(void)
{
- int i, error;
- advansys_detect();
+ int error;
- error = eisa_driver_register(&advansys_eisa_driver);
+ error = isa_register_driver(&advansys_isa_driver,
+ ASC_IOADR_TABLE_MAX_IX);
if (error)
goto fail;
+ error = isa_register_driver(&advansys_vlb_driver,
+ ASC_IOADR_TABLE_MAX_IX);
+ if (error)
+ goto unregister_isa;
+
+ error = eisa_driver_register(&advansys_eisa_driver);
+ if (error)
+ goto unregister_vlb;
+
error = pci_register_driver(&advansys_pci_driver);
if (error)
goto unregister_eisa;
@@ -18750,22 +18566,20 @@ static int __init advansys_init(void)
unregister_eisa:
eisa_driver_unregister(&advansys_eisa_driver);
+ unregister_vlb:
+ isa_unregister_driver(&advansys_vlb_driver);
+ unregister_isa:
+ isa_unregister_driver(&advansys_isa_driver);
fail:
- for (i = 0; i < asc_legacy_count; i++)
- advansys_release(asc_host[i]);
-
return error;
}
static void __exit advansys_exit(void)
{
- int i;
-
pci_unregister_driver(&advansys_pci_driver);
eisa_driver_unregister(&advansys_eisa_driver);
-
- for (i = 0; i < asc_legacy_count; i++)
- advansys_release(asc_host[i]);
+ isa_unregister_driver(&advansys_vlb_driver);
+ isa_unregister_driver(&advansys_isa_driver);
}
module_init(advansys_init);
OpenPOWER on IntegriCloud