summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJouni Malinen <jouni.malinen@atheros.com>2009-06-16 11:59:23 +0300
committerJohn W. Linville <linville@tuxdriver.com>2009-06-19 11:50:17 -0400
commitf0214843ba23d9bf6dc6b8ad2c6ee27b60f0322e (patch)
tree30bfe0824da9cda7711bd589fce6fa81406906e0
parentf72151fb6820e90ce12a15e2768aa41150c5186d (diff)
downloadop-kernel-dev-f0214843ba23d9bf6dc6b8ad2c6ee27b60f0322e.zip
op-kernel-dev-f0214843ba23d9bf6dc6b8ad2c6ee27b60f0322e.tar.gz
ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling
An earlier commit, 'ath9k: remove dummy PCI "retry timeout" fix', removed code that was documented to disable RETRY_TIMEOUT register (PCI reg 0x41) since it was claimed to be a no-op. However, it turns out that there are some combinations of hosts and ath9k-supported cards for which this is not a no-op (reg 0x41 has value 0x80, not 0) and this code (or something similar) is needed. In such cases, the driver may be next to unusable due to very frequent PCI FATAL interrupts from the card. Reverting the earlier commit, i.e., restoring the RETRY_TIMEOUT disabling, seems to resolve the issue. Since the removal of this code was not based on any known issue and was purely a cleanup change, the safest option here is to just revert that commit. Should there be desire to clean this up in the future, the change will need to be tested with a more complete coverage of cards and host systems. http://bugzilla.kernel.org/show_bug.cgi?id=13483 Cc: stable@kernel.org Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c18
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ccdf20a..170c5b3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
+ u32 val;
int ret = 0;
struct ath_hw *ah;
@@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
ret = pci_request_region(pdev, 0, "ath9k");
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@ static int ath_pci_resume(struct pci_dev *pdev)
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ u32 val;
int err;
err = pci_enable_device(pdev);
if (err)
return err;
pci_restore_state(pdev);
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
OpenPOWER on IntegriCloud