diff options
author | David S. Miller <davem@davemloft.net> | 2006-02-26 23:24:22 -0800 |
---|---|---|
committer | David S. Miller <davem@sunset.davemloft.net> | 2006-03-20 01:11:16 -0800 |
commit | 56fb4df6da76c35dca22036174e2d1edef83ff1f (patch) | |
tree | b39f152ec9ed682edceca965a85680fd4bf736a7 | |
parent | 3c936465249f863f322154ff1aaa628b84ee5750 (diff) | |
download | op-kernel-dev-56fb4df6da76c35dca22036174e2d1edef83ff1f.zip op-kernel-dev-56fb4df6da76c35dca22036174e2d1edef83ff1f.tar.gz |
[SPARC64]: Elminate all usage of hard-coded trap globals.
UltraSPARC has special sets of global registers which are switched to
for certain trap types. There is one set for MMU related traps, one
set of Interrupt Vector processing, and another set (called the
Alternate globals) for all other trap types.
For what seems like forever we've hard coded the values in some of
these trap registers. Some examples include:
1) Interrupt Vector global %g6 holds current processors interrupt
work struct where received interrupts are managed for IRQ handler
dispatch.
2) MMU global %g7 holds the base of the page tables of the currently
active address space.
3) Alternate global %g6 held the current_thread_info() value.
Such hardcoding has resulted in some serious issues in many areas.
There are some code sequences where having another register available
would help clean up the implementation. Taking traps such as
cross-calls from the OBP firmware requires some trick code sequences
wherein we have to save away and restore all of the special sets of
global registers when we enter/exit OBP.
We were also using the IMMU TSB register on SMP to hold the per-cpu
area base address, which doesn't work any longer now that we actually
use the TSB facility of the cpu.
The implementation is pretty straight forward. One tricky bit is
getting the current processor ID as that is different on different cpu
variants. We use a stub with a fancy calling convention which we
patch at boot time. The calling convention is that the stub is
branched to and the (PC - 4) to return to is in register %g1. The cpu
number is left in %g6. This stub can be invoked by using the
__GET_CPUID macro.
We use an array of per-cpu trap state to store the current thread and
physical address of the current address space's page tables. The
TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this
table, it uses __GET_CPUID and also clobbers %g1.
TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load
the current processor's IRQ software state into %g6. It also uses
__GET_CPUID and clobbers %g1.
Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the
current address space's page tables into %g7, it clobbers %g1 and uses
__GET_CPUID.
Many refinements are possible, as well as some tuning, with this stuff
in place.
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | arch/sparc64/kernel/entry.S | 122 | ||||
-rw-r--r-- | arch/sparc64/kernel/etrap.S | 18 | ||||
-rw-r--r-- | arch/sparc64/kernel/head.S | 20 | ||||
-rw-r--r-- | arch/sparc64/kernel/irq.c | 26 | ||||
-rw-r--r-- | arch/sparc64/kernel/rtrap.S | 10 | ||||
-rw-r--r-- | arch/sparc64/kernel/setup.c | 8 | ||||
-rw-r--r-- | arch/sparc64/kernel/smp.c | 55 | ||||
-rw-r--r-- | arch/sparc64/kernel/trampoline.S | 9 | ||||
-rw-r--r-- | arch/sparc64/kernel/traps.c | 19 | ||||
-rw-r--r-- | arch/sparc64/kernel/tsb.S | 26 | ||||
-rw-r--r-- | arch/sparc64/kernel/ttable.S | 2 | ||||
-rw-r--r-- | arch/sparc64/kernel/winfixup.S | 24 | ||||
-rw-r--r-- | arch/sparc64/mm/ultra.S | 10 | ||||
-rw-r--r-- | include/asm-sparc64/cpudata.h | 86 | ||||
-rw-r--r-- | include/asm-sparc64/system.h | 2 | ||||
-rw-r--r-- | include/asm-sparc64/ttable.h | 18 |
16 files changed, 287 insertions, 168 deletions
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index a73553a..906b64f 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -50,7 +50,8 @@ do_fpdis: add %g0, %g0, %g0 ba,a,pt %xcc, rtrap_clr_l6 -1: ldub [%g6 + TI_FPSAVED], %g5 +1: TRAP_LOAD_THREAD_REG + ldub [%g6 + TI_FPSAVED], %g5 wr %g0, FPRS_FEF, %fprs andcc %g5, FPRS_FEF, %g0 be,a,pt %icc, 1f @@ -189,6 +190,7 @@ fp_other_bounce: .globl do_fpother_check_fitos .align 32 do_fpother_check_fitos: + TRAP_LOAD_THREAD_REG sethi %hi(fp_other_bounce - 4), %g7 or %g7, %lo(fp_other_bounce - 4), %g7 @@ -353,8 +355,6 @@ do_fptrap_after_fsr: * * With this method we can do most of the cross-call tlb/cache * flushing very quickly. - * - * Current CPU's IRQ worklist table is locked into %g6, don't touch. */ .text .align 32 @@ -378,6 +378,8 @@ do_ivec: sllx %g2, %g4, %g2 sllx %g4, 2, %g4 + TRAP_LOAD_IRQ_WORK + lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */ stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */ stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */ @@ -488,9 +490,24 @@ setcc: retl stx %o1, [%o0 + PT_V9_TSTATE] - .globl utrap, utrap_ill -utrap: brz,pn %g1, etrap + .globl utrap_trap +utrap_trap: /* %g3=handler,%g4=level */ + TRAP_LOAD_THREAD_REG + ldx [%g6 + TI_UTRAPS], %g1 + brnz,pt %g1, invoke_utrap nop + + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + call bad_trap + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + clr %l6 + +invoke_utrap: + sllx %g3, 3, %g3 + ldx [%g1 + %g3], %g1 save %sp, -128, %sp rdpr %tstate, %l6 rdpr %cwp, %l7 @@ -500,17 +517,6 @@ utrap: brz,pn %g1, etrap rdpr %tnpc, %l7 wrpr %g1, 0, %tnpc done -utrap_ill: - call bad_trap - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 - - /* XXX Here is stuff we still need to write... -DaveM XXX */ - .globl netbsd_syscall -netbsd_syscall: - retl - nop /* We need to carefully read the error status, ACK * the errors, prevent recursive traps, and pass the @@ -1001,7 +1007,7 @@ dcpe_icpe_tl1_common: * %g3: scratch * %g4: AFSR * %g5: AFAR - * %g6: current thread ptr + * %g6: unused, will have current thread ptr after etrap * %g7: scratch */ __cheetah_log_error: @@ -1690,3 +1696,85 @@ __flushw_user: restore %g0, %g0, %g0 2: retl nop + + /* Read cpu ID from hardware, return in %g6. + * (callers_pc - 4) is in %g1. Patched at boot time. + * + * Default is spitfire implementation. + * + * The instruction sequence needs to be 5 instructions + * in order to fit the longest implementation, which is + * currently starfire. + */ + .align 32 + .globl __get_cpu_id +__get_cpu_id: + ldxa [%g0] ASI_UPA_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x1f, %g6 + nop + +__get_cpu_id_cheetah_safari: + ldxa [%g0] ASI_SAFARI_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x3ff, %g6 + nop + +__get_cpu_id_cheetah_jbus: + ldxa [%g0] ASI_JBUS_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x1f, %g6 + nop + +__get_cpu_id_starfire: + sethi %hi(0x1fff40000d0 >> 9), %g6 + sllx %g6, 9, %g6 + or %g6, 0xd0, %g6 + jmpl %g1 + 0x4, %g0 + lduwa [%g6] ASI_PHYS_BYPASS_EC_E, %g6 + + .globl per_cpu_patch +per_cpu_patch: + sethi %hi(this_is_starfire), %o0 + lduw [%o0 + %lo(this_is_starfire)], %o1 + sethi %hi(__get_cpu_id_starfire), %o0 + brnz,pn %o1, 10f + or %o0, %lo(__get_cpu_id_starfire), %o0 + sethi %hi(tlb_type), %o0 + lduw [%o0 + %lo(tlb_type)], %o1 + brz,pt %o1, 11f + nop + rdpr %ver, %o0 + srlx %o0, 32, %o0 + sethi %hi(0x003e0016), %o1 + or %o1, %lo(0x003e0016), %o1 + cmp %o0, %o1 + sethi %hi(__get_cpu_id_cheetah_jbus), %o0 + be,pn %icc, 10f + or %o0, %lo(__get_cpu_id_cheetah_jbus), %o0 + sethi %hi(__get_cpu_id_cheetah_safari), %o0 + or %o0, %lo(__get_cpu_id_cheetah_safari), %o0 +10: + sethi %hi(__get_cpu_id), %o1 + or %o1, %lo(__get_cpu_id), %o1 + lduw [%o0 + 0x00], %o2 + stw %o2, [%o1 + 0x00] + flush %o1 + 0x00 + lduw [%o0 + 0x04], %o2 + stw %o2, [%o1 + 0x04] + flush %o1 + 0x04 + lduw [%o0 + 0x08], %o2 + stw %o2, [%o1 + 0x08] + flush %o1 + 0x08 + lduw [%o0 + 0x0c], %o2 + stw %o2, [%o1 + 0x0c] + flush %o1 + 0x0c + lduw [%o0 + 0x10], %o2 + stw %o2, [%o1 + 0x10] + flush %o1 + 0x10 +11: + retl + nop diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 567dbb7..8b3b6d7 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -31,6 +31,7 @@ .globl etrap, etrap_irq, etraptl1 etrap: rdpr %pil, %g2 etrap_irq: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 sllx %g2, 20, %g3 andcc %g1, TSTATE_PRIV, %g0 @@ -98,11 +99,7 @@ etrap_irq: stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g3 - ldxa [%g3] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g4, %g3) jmpl %l2 + 0x4, %g0 ldx [%g6 + TI_TASK], %g4 @@ -126,6 +123,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. * 0x58 TL4's TT * 0x60 TL */ + TRAP_LOAD_THREAD_REG sub %sp, ((4 * 8) * 4) + 8, %g2 rdpr %tl, %g1 @@ -179,7 +177,9 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. .align 64 .globl scetrap -scetrap: rdpr %pil, %g2 +scetrap: + TRAP_LOAD_THREAD_REG + rdpr %pil, %g2 rdpr %tstate, %g1 sllx %g2, 20, %g3 andcc %g1, TSTATE_PRIV, %g0 @@ -248,11 +248,7 @@ scetrap: rdpr %pil, %g2 stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] mov %l6, %g6 stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g3 - ldxa [%g3] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g4, %g3) ldx [%g6 + TI_TASK], %g4 done diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index d00e206..82ce5bc 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -26,6 +26,7 @@ #include <asm/head.h> #include <asm/ttable.h> #include <asm/mmu.h> +#include <asm/cpudata.h> /* This section from from _start to sparc64_boot_end should fit into * 0x0000000000404000 to 0x0000000000408000. @@ -421,24 +422,6 @@ setup_trap_table: stxa %g2, [%g1] ASI_DMMU membar #Sync - /* The Linux trap handlers expect various trap global registers - * to be setup with some fixed values. So here we set these - * up very carefully. These globals are: - * - * Alternate Globals (PSTATE_AG): - * - * %g6 --> current_thread_info() - * - * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): - * - * %g6 --> __irq_work[smp_processor_id()] - */ - - rdpr %pstate, %o1 - mov %g6, %o2 - wrpr %o1, PSTATE_AG, %pstate - mov %o2, %g6 - /* Kill PROM timer */ sethi %hi(0x80000000), %o2 sllx %o2, 32, %o2 @@ -457,7 +440,6 @@ setup_trap_table: 2: wrpr %g0, %g0, %wstate - wrpr %o1, 0x0, %pstate call init_irqwork_curcpu nop diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index f7490ef..3e48af2 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -848,33 +848,9 @@ static void kill_prom_timer(void) void init_irqwork_curcpu(void) { - register struct irq_work_struct *workp asm("o2"); - register unsigned long tmp asm("o3"); int cpu = hard_smp_processor_id(); - memset(__irq_work + cpu, 0, sizeof(*workp)); - - /* Make sure we are called with PSTATE_IE disabled. */ - __asm__ __volatile__("rdpr %%pstate, %0\n\t" - : "=r" (tmp)); - if (tmp & PSTATE_IE) { - prom_printf("BUG: init_irqwork_curcpu() called with " - "PSTATE_IE enabled, bailing.\n"); - __asm__ __volatile__("mov %%i7, %0\n\t" - : "=r" (tmp)); - prom_printf("BUG: Called from %lx\n", tmp); - prom_halt(); - } - - /* Set interrupt globals. */ - workp = &__irq_work[cpu]; - __asm__ __volatile__( - "rdpr %%pstate, %0\n\t" - "wrpr %0, %1, %%pstate\n\t" - "mov %2, %%g6\n\t" - "wrpr %0, 0x0, %%pstate\n\t" - : "=&r" (tmp) - : "i" (PSTATE_IG), "r" (workp)); + memset(__irq_work + cpu, 0, sizeof(struct irq_work_struct)); } /* Only invoked on boot processor. */ diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 213eb4a..5a62ec5d 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -223,12 +223,10 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3 ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4 ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g6 - brnz,a,pn %l3, 1f - ldxa [%g6] ASI_IMMU, %g5 -#endif + brz,pt %l3, 1f + nop + /* Must do this before thread reg is clobbered below. */ + LOAD_PER_CPU_BASE(%g6, %g7) 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 158bd31..59a7030 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -507,6 +507,11 @@ void __init setup_arch(char **cmdline_p) /* Work out if we are starfire early on */ check_if_starfire(); + /* Now we know enough to patch the __get_cpu_id() + * trampoline used by trap code. + */ + per_cpu_patch(); + boot_flags_init(*cmdline_p); idprom_init(); @@ -545,6 +550,9 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_possible_map(); paging_init(); + + /* Get boot processor trap_block[] setup. */ + init_cur_cpu_trap(); } static int __init set_preferred_console(void) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index d2d3369..8c24585 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -38,6 +38,7 @@ #include <asm/timer.h> #include <asm/starfire.h> #include <asm/tlb.h> +#include <asm/sections.h> extern void calibrate_delay(void); @@ -87,10 +88,6 @@ void __init smp_store_cpu_info(int id) cpu_data(id).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); - cpu_data(id).pgcache_size = 0; - cpu_data(id).pte_cache[0] = NULL; - cpu_data(id).pte_cache[1] = NULL; - cpu_data(id).pgd_cache = NULL; cpu_data(id).idle_volume = 1; cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size", @@ -121,26 +118,15 @@ static volatile unsigned long callin_flag = 0; extern void inherit_locked_prom_mappings(int save_p); -static inline void cpu_setup_percpu_base(unsigned long cpu_id) -{ -#error IMMU TSB usage must be fixed - __asm__ __volatile__("mov %0, %%g5\n\t" - "stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (__per_cpu_offset(cpu_id)), - "r" (TSB_REG), "i" (ASI_IMMU)); -} - void __init smp_callin(void) { int cpuid = hard_smp_processor_id(); inherit_locked_prom_mappings(0); - __flush_tlb_all(); + __local_per_cpu_offset = __per_cpu_offset(cpuid); - cpu_setup_percpu_base(cpuid); + __flush_tlb_all(); smp_setup_percpu_timer(); @@ -1107,12 +1093,15 @@ void __init smp_setup_cpu_possible_map(void) void __devinit smp_prepare_boot_cpu(void) { - if (hard_smp_processor_id() >= NR_CPUS) { + int cpu = hard_smp_processor_id(); + + if (cpu >= NR_CPUS) { prom_printf("Serious problem, boot cpu id >= NR_CPUS\n"); prom_halt(); } - current_thread_info()->cpu = hard_smp_processor_id(); + current_thread_info()->cpu = cpu; + __local_per_cpu_offset = __per_cpu_offset(cpu); cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), phys_cpu_present_map); @@ -1173,12 +1162,9 @@ void __init setup_per_cpu_areas(void) { unsigned long goal, size, i; char *ptr; - /* Created by linker magic */ - extern char __per_cpu_start[], __per_cpu_end[]; /* Copy section for each CPU (we discard the original) */ - goal = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); - + goal = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); #ifdef CONFIG_MODULES if (goal < PERCPU_ENOUGH_ROOM) goal = PERCPU_ENOUGH_ROOM; @@ -1187,31 +1173,10 @@ void __init setup_per_cpu_areas(void) for (size = 1UL; size < goal; size <<= 1UL) __per_cpu_shift++; - /* Make sure the resulting __per_cpu_base value - * will fit in the 43-bit sign extended IMMU - * TSB register. - */ - ptr = __alloc_bootmem(size * NR_CPUS, PAGE_SIZE, - (unsigned long) __per_cpu_start); + ptr = alloc_bootmem(size * NR_CPUS); __per_cpu_base = ptr - __per_cpu_start; - if ((__per_cpu_shift < PAGE_SHIFT) || - (__per_cpu_base & ~PAGE_MASK) || - (__per_cpu_base != (((long) __per_cpu_base << 20) >> 20))) { - prom_printf("PER_CPU: Invalid layout, " - "ptr[%p] shift[%lx] base[%lx]\n", - ptr, __per_cpu_shift, __per_cpu_base); - prom_halt(); - } - for (i = 0; i < NR_CPUS; i++, ptr += size) memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - - /* Finally, load in the boot cpu's base value. - * We abuse the IMMU TSB register for trap handler - * entry and exit loading of %g5. That is why it - * has to be page aligned. - */ - cpu_setup_percpu_base(hard_smp_processor_id()); } diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 782d8c4..18c333f 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -287,21 +287,18 @@ do_unlock: wrpr %g0, 0, %wstate wrpr %g0, 0, %tl - /* Setup the trap globals, then we can resurface. */ - rdpr %pstate, %o1 - mov %g6, %o2 - wrpr %o1, PSTATE_AG, %pstate + /* Load TBA, then we can resurface. */ sethi %hi(sparc64_ttable_tl0), %g5 wrpr %g5, %tba - mov %o2, %g6 - wrpr %o1, 0x0, %pstate ldx [%g6 + TI_TASK], %g4 wrpr %g0, 0, %wstate call init_irqwork_curcpu nop + call init_cur_cpu_trap + nop /* Start using proper page size encodings in ctx register. */ sethi %hi(sparc64_kern_pri_context), %g3 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 8d44ae5..f47f4874 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2130,7 +2130,22 @@ void do_getpsr(struct pt_regs *regs) } } +struct trap_per_cpu trap_block[NR_CPUS]; + +/* This can get invoked before sched_init() so play it super safe + * and use hard_smp_processor_id(). + */ +void init_cur_cpu_trap(void) +{ + int cpu = hard_smp_processor_id(); + struct trap_per_cpu *p = &trap_block[cpu]; + + p->thread = current_thread_info(); + p->pgd_paddr = 0; +} + extern void thread_info_offsets_are_bolixed_dave(void); +extern void trap_per_cpu_offsets_are_bolixed_dave(void); /* Only invoked on boot processor. */ void __init trap_init(void) @@ -2165,6 +2180,10 @@ void __init trap_init(void) (TI_FPREGS & (64 - 1))) thread_info_offsets_are_bolixed_dave(); + if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) || + TRAP_PER_CPU_PGD_PADDR != offsetof(struct trap_per_cpu, pgd_paddr)) + trap_per_cpu_offsets_are_bolixed_dave(); + /* Attach to the address space of init_task. On SMP we * do this in smp.c:smp_callin for other cpus. */ diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 44b9e6f..50752c5 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -36,6 +36,15 @@ tsb_miss_itlb: nop tsb_miss_page_table_walk: + /* This clobbers %g1 and %g6, preserve them... */ + mov %g1, %g5 + mov %g6, %g2 + + TRAP_LOAD_PGD_PHYS + + mov %g2, %g6 + mov %g5, %g1 + USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) tsb_reload: @@ -112,15 +121,20 @@ winfix_trampoline: * %o0: page table physical address * %o1: TSB address */ + .align 32 .globl tsb_context_switch tsb_context_switch: - wrpr %g0, PSTATE_MG | PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV, %pstate + rdpr %pstate, %o5 + wrpr %o5, PSTATE_IE, %pstate - /* Set page table base alternate global. */ - mov %o0, %g7 + ldub [%g6 + TI_CPU], %o3 + sethi %hi(trap_block), %o4 + sllx %o3, TRAP_BLOCK_SZ_SHIFT, %o3 + or %o4, %lo(trap_block), %o4 + add %o4, %o3, %o4 + stx %o0, [%o4 + TRAP_PER_CPU_PGD_PADDR] - /* XXX can this happen? */ - brz,pn %o1, 9f + brgez %o1, 9f nop /* Lock TSB into D-TLB. */ @@ -163,7 +177,7 @@ tsb_context_switch: membar #Sync 9: - wrpr %g0, PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE, %pstate + wrpr %o5, %pstate retl mov %o2, %o0 diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 56f060c..2fb7a33 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -128,7 +128,7 @@ tl0_flushw: FLUSH_WINDOW_TRAP tl0_resv104: BTRAP(0x104) BTRAP(0x105) BTRAP(0x106) BTRAP(0x107) .globl tl0_solaris tl0_solaris: SOLARIS_SYSCALL_TRAP -tl0_netbsd: NETBSD_SYSCALL_TRAP +tl0_resv109: BTRAP(0x109) tl0_resv10a: BTRAP(0x10a) BTRAP(0x10b) BTRAP(0x10c) BTRAP(0x10d) BTRAP(0x10e) tl0_resv10f: BTRAP(0x10f) tl0_linux32: LINUX_32BIT_SYSCALL_TRAP diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index f5d93aa..de58803 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -39,6 +39,7 @@ set_pcontext: */ .globl fill_fixup, spill_fixup fill_fixup: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 or %g4, FAULT_CODE_WINFIXUP, %g4 @@ -84,11 +85,7 @@ fill_fixup: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ldx [%g6 + TI_TASK], %g4 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) /* This is the same as below, except we handle this a bit special * since we must preserve %l5 and %l6, see comment above. @@ -107,6 +104,7 @@ fill_fixup: * do not touch %g7 or %g2 so we handle the two cases fine. */ spill_fixup: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -182,6 +180,7 @@ winfix_mna: wrpr %g3, %tnpc done fill_fixup_mna: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_mna_from_user_common @@ -209,17 +208,14 @@ fill_fixup_mna: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) call mem_address_unaligned add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_mna: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -287,6 +283,7 @@ winfix_dax: wrpr %g3, %tnpc done fill_fixup_dax: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_dax_from_user_common @@ -314,17 +311,14 @@ fill_fixup_dax: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_dax: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 22791f2..a873948 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -295,12 +295,10 @@ cheetah_patch_cachetlbops: * %g1 address arg 1 (tlb page and range flushes) * %g7 address arg 2 (tlb range flush only) * - * %g6 ivector table, don't touch - * %g2 scratch 1 - * %g3 scratch 2 - * %g4 scratch 3 - * - * TODO: Make xcall TLB range flushes use the tricks above... -DaveM + * %g6 scratch 1 + * %g2 scratch 2 + * %g3 scratch 3 + * %g4 scratch 4 */ .align 32 .globl xcall_flush_tlb_mm diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h index f7c0faed..6c57cbb 100644 --- a/include/asm-sparc64/cpudata.h +++ b/include/asm-sparc64/cpudata.h @@ -1,12 +1,15 @@ /* cpudata.h: Per-cpu parameters. * - * Copyright (C) 2003, 2005 David S. Miller (davem@redhat.com) + * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net) */ #ifndef _SPARC64_CPUDATA_H #define _SPARC64_CPUDATA_H +#ifndef __ASSEMBLY__ + #include <linux/percpu.h> +#include <linux/threads.h> typedef struct { /* Dcache line 1 */ @@ -32,4 +35,85 @@ DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); #define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) #define local_cpu_data() __get_cpu_var(__cpu_data) +/* Trap handling code needs to get at a few critical values upon + * trap entry and to process TSB misses. These cannot be in the + * per_cpu() area as we really need to lock them into the TLB and + * thus make them part of the main kernel image. As a result we + * try to make this as small as possible. + * + * This is padded out and aligned to 64-bytes to avoid false sharing + * on SMP. + */ + +/* If you modify the size of this structure, please update + * TRAP_BLOCK_SZ_SHIFT below. + */ +struct thread_info; +struct trap_per_cpu { +/* D-cache line 1 */ + struct thread_info *thread; + unsigned long pgd_paddr; + unsigned long __pad1[2]; + +/* D-cache line 2 */ + unsigned long __pad2[4]; +} __attribute__((aligned(64))); +extern struct trap_per_cpu trap_block[NR_CPUS]; +extern void init_cur_cpu_trap(void); +extern void per_cpu_patch(void); + +#endif /* !(__ASSEMBLY__) */ + +#define TRAP_PER_CPU_THREAD 0x00 +#define TRAP_PER_CPU_PGD_PADDR 0x08 + +#define TRAP_BLOCK_SZ_SHIFT 6 + +/* Clobbers %g1, loads %g6 with local processor's cpuid */ +#define __GET_CPUID \ + ba,pt %xcc, __get_cpu_id; \ + rd %pc, %g1; + +/* Clobbers %g1, current address space PGD phys address into %g7. */ +#define TRAP_LOAD_PGD_PHYS \ + __GET_CPUID \ + sllx %g6, TRAP_BLOCK_SZ_SHIFT, %g6; \ + sethi %hi(trap_block), %g7; \ + or %g7, %lo(trap_block), %g7; \ + add %g7, %g6, %g7; \ + ldx [%g7 + TRAP_PER_CPU_PGD_PADDR], %g7; + +/* Clobbers %g1, loads local processor's IRQ work area into %g6. */ +#define TRAP_LOAD_IRQ_WORK \ + __GET_CPUID \ + sethi %hi(__irq_work), %g1; \ + sllx %g6, 6, %g6; \ + or %g1, %lo(__irq_work), %g1; \ + add %g1, %g6, %g6; + +/* Clobbers %g1, loads %g6 with current thread info pointer. */ +#define TRAP_LOAD_THREAD_REG \ + __GET_CPUID \ + sllx %g6, TRAP_BLOCK_SZ_SHIFT, %g6; \ + sethi %hi(trap_block), %g1; \ + or %g1, %lo(trap_block), %g1; \ + ldx [%g1 + %g6], %g6; + +/* Given the current thread info pointer in %g6, load the per-cpu + * area base of the current processor into %g5. REG1 and REG2 are + * clobbered. + */ +#ifdef CONFIG_SMP +#define LOAD_PER_CPU_BASE(REG1, REG2) \ + ldub [%g6 + TI_CPU], REG1; \ + sethi %hi(__per_cpu_shift), %g5; \ + sethi %hi(__per_cpu_base), REG2; \ + ldx [%g5 + %lo(__per_cpu_shift)], %g5; \ + ldx [REG2 + %lo(__per_cpu_base)], REG2; \ + sllx REG1, %g5, %g5; \ + add %g5, REG2, %g5; +#else +#define LOAD_PER_CPU_BASE(REG1, REG2) +#endif + #endif /* _SPARC64_CPUDATA_H */ diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h index af254e5..26c0807 100644 --- a/include/asm-sparc64/system.h +++ b/include/asm-sparc64/system.h @@ -209,6 +209,8 @@ do { if (test_thread_flag(TIF_PERFCTR)) { \ /* so that ASI is only written if it changes, think again. */ \ __asm__ __volatile__("wr %%g0, %0, %%asi" \ : : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\ + trap_block[current_thread_info()->cpu].thread = \ + task_thread_info(next); \ __asm__ __volatile__( \ "mov %%g4, %%g7\n\t" \ "wrpr %%g0, 0x95, %%pstate\n\t" \ diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index 2784f80..f557db4 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -109,14 +109,14 @@ nop;nop;nop; #define TRAP_UTRAP(handler,lvl) \ - ldx [%g6 + TI_UTRAPS], %g1; \ - sethi %hi(109f), %g7; \ - brz,pn %g1, utrap; \ - or %g7, %lo(109f), %g7; \ - ba,pt %xcc, utrap; \ -109: ldx [%g1 + handler*8], %g1; \ - ba,pt %xcc, utrap_ill; \ - mov lvl, %o1; + mov handler, %g3; \ + ba,pt %xcc, utrap_trap; \ + mov lvl, %g4; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; #ifdef CONFIG_SUNOS_EMUL #define SUNOS_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sunos_sys_table) @@ -136,8 +136,6 @@ #else #define SOLARIS_SYSCALL_TRAP TRAP(solaris_syscall) #endif -/* FIXME: Write these actually */ -#define NETBSD_SYSCALL_TRAP TRAP(netbsd_syscall) #define BREAKPOINT_TRAP TRAP(breakpoint_trap) #define TRAP_IRQ(routine, level) \ |