Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Delete totally outdated Documentation/mips/time.README
  [MIPS] Kill duplicated setup_irq() for cp0 timer
  [MIPS] Sibyte: Finish conversion to modern time APIs.
  [MIPS] time: Helpers to compute clocksource/event shift and mult values.
  [MIPS] SMTC: Build fix.
  [MIPS] time: Delete dead code.
  [MIPS] MIPSsim: Strip defconfig file to the bones.

23 files changed, 254 insertions, 882 deletions

diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX
index 9df8a2e..3f13bf8 100644
--- a/Documentation/mips/00-INDEX
+++ b/Documentation/mips/00-INDEX
@@ -4,5 +4,3 @@ AU1xxx_IDE.README
 	- README for MIPS AU1XXX IDE driver.
 GT64120.README
 	- README for dir with info on MIPS boards using GT-64120 or GT-64120A.
-time.README
-	- README for MIPS time services.
diff --git a/Documentation/mips/time.README b/Documentation/mips/time.README
deleted file mode 100644
index a4ce603..0000000
--- a/Documentation/mips/time.README
+++ /dev/null
@@ -1,173 +0,0 @@
-README for MIPS time services
-
-Jun Sun
-jsun@mvista.com or jsun@junsun.net
-
-
-ABOUT
------
-This file describes the new arch/mips/kernel/time.c, related files and the 
-services they provide. 
-
-If you are short in patience and just want to know how to use time.c for a 
-new board or convert an existing board, go to the last section.
-
-
-FILES, COMPATABILITY AND CONFIGS
----------------------------------
-
-The old arch/mips/kernel/time.c is renamed to old-time.c.
-
-A new time.c is put there, together with include/asm-mips/time.h.
-
-Two configs variables are introduced, CONFIG_OLD_TIME_C and CONFIG_NEW_TIME_C.
-So we allow boards using 
-
-	1) old time.c (CONFIG_OLD_TIME_C)
-	2) new time.c (CONFIG_NEW_TIME_C)
-	3) neither (their own private time.c)
-
-However, it is expected every board will move to the new time.c in the near
-future.
-
-
-WHAT THE NEW CODE PROVIDES?
---------------------------- 
-
-The new time code provide the following services:
-
-  a) Implements functions required by Linux common code:
-	time_init
-
-  b) provides an abstraction of RTC and null RTC implementation as default.
-	extern unsigned long (*rtc_get_time)(void);
-	extern int (*rtc_set_time)(unsigned long);
-
-  c) high-level and low-level timer interrupt routines where the timer
-     interrupt source  may or may not be the CPU timer.  The high-level
-     routine is dispatched through do_IRQ() while the low-level is
-     dispatched in assemably code (usually int-handler.S)
-
-
-WHAT THE NEW CODE REQUIRES?
----------------------------
-
-For the new code to work properly, each board implementation needs to supply
-the following functions or values:
-
-  a) board_time_init - a function pointer.  Invoked at the beginnig of
-     time_init().  It is optional.
-	1. (optional) set up RTC routines
-	2. (optional) calibrate and set the mips_hpt_frequency
-
-  b) plat_timer_setup - a function pointer.  Invoked at the end of time_init()
-	1. (optional) over-ride any decisions made in time_init()
-	2. set up the irqaction for timer interrupt.
-	3. enable the timer interrupt
-
-  c) (optional) board-specific RTC routines.
-
-  d) (optional) mips_hpt_frequency - It must be definied if the board
-     is using CPU counter for timer interrupt.
-
-
-PORTING GUIDE
--------------
-
-Step 1: decide how you like to implement the time services.
-
-  a) does this board have a RTC?  If yes, implement the two RTC funcs.
-
-  b) does the CPU have counter/compare registers? 
-
-     If the answer is no, you need a timer to provide the timer interrupt
-     at 100 HZ speed.
-
-  c) The following sub steps assume your CPU has counter register.
-     Do you plan to use the CPU counter register as the timer interrupt
-     or use an exnternal timer?
-
-     In order to use CPU counter register as the timer interrupt source, you
-     must know the counter speed (mips_hpt_frequency).  It is usually the
-     same as the CPU speed or an integral divisor of it.
-
-  d) decide on whether you want to use high-level or low-level timer
-     interrupt routines.  The low-level one is presumably faster, but should
-     not make too mcuh difference.
-
-
-Step 2:  the machine setup() function
-
-  If you supply board_time_init(), set the function poointer.
-
-
-Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
-  if needed.
-
-  board_time_init() -
-  	a) (optional) set up RTC routines,
-        b) (optional) calibrate and set the mips_hpt_frequency
- 	    (only needed if you intended to use cpu counter as timer interrupt
- 	     source)
-
-  plat_timer_setup() -
- 	a) (optional) over-write any choices made above by time_init().
- 	b) machine specific code should setup the timer irqaction.
- 	c) enable the timer interrupt
-
-
-  If the RTC chip is a common chip, I suggest the routines are put under
-  arch/mips/libs.  For example, for DS1386 chip, one would create
-  rtc-ds1386.c under arch/mips/lib directory.  Add the following line to
-  the arch/mips/lib/Makefile:
-
-	obj-$(CONFIG_DDB5476) += rtc-ds1386.o
-
-Step 4: if you are using low-level timer interrupt, change your interrupt
-  dispathcing code to check for timer interrupt and jump to 
-  ll_timer_interrupt() directly  if one is detected.
-
-Step 5: Modify arch/mips/config.in and add CONFIG_NEW_TIME_C to your machine.
-  Modify the appropriate defconfig if applicable.
-
-Final notes: 
-
-For some tricky cases, you may need to add your own wrapper functions 
-for some of the functions in time.c.  
-
-For example, you may define your own timer interrupt routine, which does
-some of its own processing and then calls timer_interrupt().
-
-You can also over-ride any of the built-in functions (RTC routines
-and/or timer interrupt routine).
-
-
-PORTING NOTES FOR SMP
-----------------------
-
-If you have a SMP box, things are slightly more complicated.
-
-The time service running every jiffy is logically divided into two parts:
-
-  1) the one for the whole system  (defined in timer_interrupt())
-  2) the one that should run for each CPU (defined in local_timer_interrupt())
-
-You need to decide on your timer interrupt sources.
-
-  case 1) - whole system has only one timer interrupt delivered to one CPU
-
-	In this case, you set up timer interrupt as in UP systems.  In addtion,
-	you need to set emulate_local_timer_interrupt to 1 so that other
-	CPUs get to call local_timer_interrupt().
-
-	THIS IS CURRENTLY NOT IMPLEMNETED.  However, it is rather easy to write
-	one should such a need arise.  You simply make a IPI call.
-
-  case 2) - each CPU has a separate timer interrupt
-
-	In this case, you need to set up IRQ such that each of them will
-	call local_timer_interrupt().  In addition, you need to arrange
-	one and only one of them to call timer_interrupt().
-
-	You can also do the low-level version of those interrupt routines,
-	following similar dispatching routes described above.
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 0ab4676..0c6f47b 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -46,10 +46,3 @@ void __init plat_time_init(void)
 	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
 	mips_hpt_frequency = hz;
 }
-
-void __init
-plat_timer_setup(struct irqaction *irq)
-{
-	/* Enable the timer interrupt */
-	setup_irq(7, irq);
-}
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 86dcb74..61b72f5 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -1,71 +1,68 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:35 2007
+# Linux kernel version: 2.6.23
+# Thu Oct 18 22:45:52 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 CONFIG_MIPS_SIM=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -76,6 +73,11 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_CPU_LOONGSON2 is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -115,8 +117,8 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -130,50 +132,52 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -187,31 +191,29 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -229,18 +231,11 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -250,9 +245,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -262,75 +256,50 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_ASK_IP_FIB_HASH=y
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -347,44 +316,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 # QoS and/or fair queueing
 #
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
-CONFIG_NET_ESTIMATOR=y
+# CONFIG_NET_SCHED is not set
 
 #
 # Network testing
@@ -393,8 +325,17 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
-CONFIG_FIB_RULES=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -403,52 +344,25 @@ CONFIG_FIB_RULES=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -456,48 +370,29 @@ CONFIG_BLK_DEV_NBD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_SIM_NET=y
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -513,49 +408,18 @@ CONFIG_MIPS_SIM_NET=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -581,31 +445,13 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -613,118 +459,60 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Sound
 #
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -732,6 +520,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 # CONFIG_INOTIFY is not set
@@ -760,10 +549,11 @@ CONFIG_ROMFS_FS=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -781,10 +571,7 @@ CONFIG_RAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -796,6 +583,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -803,22 +591,14 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -833,20 +613,22 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -854,7 +636,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -865,60 +649,20 @@ CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
-CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-CONFIG_CRC32=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 5e1da53..82f9e901 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -104,12 +104,6 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* we are using the cpu counter for timer interrupts */
-	setup_irq(CPU_IRQ_BASE + 7, irq);
-}
-
 static void markeins_board_init(void);
 extern void markeins_irq_setup(void);
 
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 08b84d4..a915e56 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -10,6 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 
+#include <asm/smtc_ipi.h>
 #include <asm/time.h>
 
 static int mips_next_event(unsigned long delta,
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index ea7cfe7..c4e6866 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -40,17 +40,6 @@
 #include <irq.h>
 
 /*
- * The integer part of the number of usecs per jiffy is taken from tick,
- * but the fractional part is not recorded, so we calculate it using the
- * initial value of HZ.  This aids systems where tick isn't really an
- * integer (e.g. for HZ = 128).
- */
-#define USECS_PER_JIFFY		TICK_SIZE
-#define USECS_PER_JIFFY_FRAC	((unsigned long)(u32)((1000000ULL << 32) / HZ))
-
-#define TICK_SIZE	(tick_nsec / 1000)
-
-/*
  * forward reference
  */
 DEFINE_SPINLOCK(rtc_lock);
@@ -182,84 +171,59 @@ struct clocksource clocksource_mips = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init init_mips_clocksource(void)
+void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
 {
 	u64 temp;
 	u32 shift;
 
-	if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
-		return;
-
-	/* Calclate a somewhat reasonable rating value */
-	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 	/* Find a shift value */
 	for (shift = 32; shift > 0; shift--) {
 		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, mips_hpt_frequency);
+		do_div(temp, clock);
 		if ((temp >> 32) == 0)
 			break;
 	}
-	clocksource_mips.shift = shift;
-	clocksource_mips.mult = (u32)temp;
-
-	clocksource_register(&clocksource_mips);
+	cs->shift = shift;
+	cs->mult = (u32) temp;
 }
 
-void __init __weak plat_time_init(void)
+void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
+	unsigned int clock)
 {
+	u64 temp;
+	u32 shift;
+
+	/* Find a shift value */
+	for (shift = 32; shift > 0; shift--) {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, clock);
+		if ((temp >> 32) == 0)
+			break;
+	}
+	cd->shift = shift;
+	cd->mult = (u32) temp;
 }
 
-void __init __weak plat_timer_setup(struct irqaction *irq)
+static void __init init_mips_clocksource(void)
 {
-}
+	if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
+		return;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+	/* Calclate a somewhat reasonable rating value */
+	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
+	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+	clocksource_register(&clocksource_mips);
 }
 
-static void mips_broadcast(cpumask_t mask)
+void __init __weak plat_time_init(void)
 {
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
 }
 
-static void setup_smtc_dummy_clockevent_device(void)
+void __init __weak plat_timer_setup(struct irqaction *irq)
 {
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
 }
-#endif
 
 void __init time_init(void)
 {
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
index 09314a2..2cc6745 100644
--- a/arch/mips/lemote/lm2e/setup.c
+++ b/arch/mips/lemote/lm2e/setup.c
@@ -53,11 +53,6 @@ unsigned long bus_clock;
 unsigned int memsize;
 unsigned int highmemsize = 0;
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(MIPS_CPU_IRQ_BASE + 7, irq);
-}
-
 void __init plat_time_init(void)
 {
 	/* setup mips r4k timer */
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c
index f221d47..7cfeda5 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c
@@ -86,8 +86,5 @@ void __init plat_timer_setup(struct irqaction *irq)
 #ifdef CONFIG_IRQ_MSP_CIC
 	/* we are using the vpe0 counter for timer interrupts */
 	setup_irq(MSP_INT_VPE0_TIMER, irq);
-#else
-	/* we are using the mips counter for timer interrupts */
-	setup_irq(MSP_INT_TIMER, irq);
 #endif
 }
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 015fcc3..855977c 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -137,11 +137,6 @@ int rtc_mips_set_time(unsigned long tim)
 	return 0;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(7, irq);
-}
-
 void __init plat_time_init(void)
 {
 	mips_hpt_frequency = cpu_clock_freq / 2;
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 6eac36d..02b266a 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -69,8 +69,9 @@ void bcm1480_smp_init(void)
 
 void bcm1480_smp_finish(void)
 {
-	extern void bcm1480_time_init(void);
-	bcm1480_time_init();
+	extern void sb1480_clockevent_init(void);
+
+	sb1480_clockevent_init();
 	local_irq_enable();
 }
 
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index 5b4bfbb..c730744 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -27,9 +27,8 @@
  */
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
-#include <linux/sched.h>
+#include <linux/percpu.h>
 #include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
 
 #include <asm/irq.h>
 #include <asm/addrspace.h>
@@ -101,25 +100,36 @@ static void sibyte_set_mode(enum clock_event_mode mode,
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
 		;
 	}
 }
 
-struct clock_event_device sibyte_hpt_clockevent = {
-	.name		= "bcm1480-counter",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= sibyte_set_mode,
-	.shift		= 32,
-	.irq		= 0,
-};
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *timer_init;
+	unsigned int cnt;
+	int res;
+
+	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+	cnt = __raw_readq(timer_init);
+	cnt += delta;
+	__raw_writeq(cnt, timer_init);
+	res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
+
+	return res;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
 
 static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *cd = &sibyte_hpt_clockevent;
 	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
 	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 	             IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 	cd->event_handler(cd);
 
@@ -140,24 +150,21 @@ static struct irqaction sibyte_counter_irqaction = {
  * called directly from irq_handler.S when IP[4] is set during an
  * interrupt
  */
-static void __init sb1480_clockevent_init(void)
+void __cpuinit sb1480_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
-	setup_irq(irq, &sibyte_counter_irqaction);
-}
+	cd->name		= "bcm1480-counter";
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_MODE_ONESHOT;
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	cd->irq			= irq;
+	clockevent_set_clock(cd, BCM1480_HPT_VALUE);
 
-void bcm1480_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	ll_timer_interrupt(irq);
+	setup_irq(irq, &sibyte_counter_irqaction);
 }
 
 static cycle_t bcm1480_hpt_read(void)
@@ -168,9 +175,26 @@ static cycle_t bcm1480_hpt_read(void)
 	return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
 }
 
+struct clocksource bcm1480_clocksource = {
+	.name	= "MIPS",
+	.rating	= 200,
+	.read	= bcm1480_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 32,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1480_clocksource;
+
+	clocksource_set_clock(cs, BCM1480_HPT_VALUE);
+	clocksource_register(cs);
+}
+
 void __init bcm1480_hpt_setup(void)
 {
-	clocksource_mips.read = bcm1480_hpt_read;
 	mips_hpt_frequency = BCM1480_HPT_VALUE;
+	sb1480_clocksource_init();
 	sb1480_clockevent_init();
 }
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 7659174..500d17e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -400,43 +400,11 @@ static void sb1250_kgdb_interrupt(void)
 
 #endif 	/* CONFIG_KGDB */
 
-static inline void sb1250_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_INT_TIMER_0 + cpu;
-
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
-
-	write_seqlock(&xtime_lock);
-
-	/* ACK interrupt */
-	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	/*
-	 * call the generic timer interrupt handling
-	 */
-	do_timer(1);
-
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accouting.
-	 *
-	 * In SMP mode, local_timer_interrupt() is invoked by appropriate
-	 * low-level local timer interrupt handler.
-	 */
-	local_timer_interrupt(irq);
-
-	irq_exit();
-}
-
 extern void sb1250_mailbox_interrupt(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
+	unsigned int cpu = smp_processor_id();
 	unsigned int pending;
 
 	/*
@@ -454,7 +422,7 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP4)
-		sb1250_timer_interrupt();
+		do_IRQ(K_INT_TIMER_0 + cpu); 	/* sb1250_timer_interrupt() */
 
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index c38e1f3..aaa4f30 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -57,8 +57,9 @@ void sb1250_smp_init(void)
 
 void sb1250_smp_finish(void)
 {
-	extern void sb1250_time_init(void);
-	sb1250_time_init();
+	extern void sb1250_clockevent_init(void);
+
+	sb1250_clockevent_init();
 	local_irq_enable();
 }
 
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index fe11fed..9ef5462 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -100,6 +100,7 @@ static void sibyte_set_mode(enum clock_event_mode mode,
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
 		;
 	}
 }
@@ -144,79 +145,7 @@ static struct irqaction sibyte_irqaction = {
 	.name		= "timer",
 };
 
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *timer_cfg, *timer_init;
-
-	timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writeq(0, timer_cfg);
-		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
-		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-			     timer_cfg);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Stop the timer until we actually program a shot */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writeq(0, timer_cfg);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
-		;
-	}
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *timer_cfg, *timer_init;
-
-	timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	__raw_writeq(0, timer_cfg);
-	__raw_writeq(delta, timer_init);
-	__raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
-	return 0;
-}
-
-struct clock_event_device sibyte_hpt_clockevent = {
-	.name		= "sb1250-counter",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= sibyte_set_mode,
-	.set_next_event	= sibyte_next_event,
-	.shift		= 32,
-	.irq		= 0,
-};
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *cd = &sibyte_hpt_clockevent;
-
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
-	.handler	= sibyte_counter_handler,
-	.flags		= IRQF_DISABLED | IRQF_PERCPU,
-	.name		= "timer",
-};
-
-static void __init sb1250_clockevent_init(void)
+void __cpuinit sb1250_clockevent_init(void)
 {
 	struct clock_event_device *cd = &sibyte_hpt_clockevent;
 	unsigned int cpu = smp_processor_id();
@@ -249,12 +178,6 @@ static void __init sb1250_clockevent_init(void)
 	clockevents_register_device(cd);
 }
 
-void __init plat_time_init(void)
-{
-	sb1250_clocksource_init();
-	sb1250_clockevent_init();
-}
-
 /*
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
@@ -267,3 +190,26 @@ static cycle_t sb1250_hpt_read(void)
 
 	return SB1250_HPT_VALUE - count;
 }
+
+struct clocksource bcm1250_clocksource = {
+	.name	= "MIPS",
+	.rating	= 200,
+	.read	= sb1250_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 32,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1250_clocksource;
+
+	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+	clocksource_register(cs);
+}
+
+void __init plat_time_init(void)
+{
+	sb1250_clocksource_init();
+	sb1250_clockevent_init();
+}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 8b3ef0e..080c966 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -69,31 +69,6 @@ const char *get_system_type(void)
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
-void __init plat_time_init(void)
-{
-#if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-	/* Setup HPT */
-	sb1250_hpt_setup();
-#endif
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-        /*
-         * we don't set up irqaction, because we will deliver timer
-         * interrupts through low-level (direct) meachanism.
-         */
-
-        /* We only need to setup the generic timer */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	bcm1480_time_init();
-#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-	sb1250_time_init();
-#else
-#error invalid SiByte board configuration
-#endif
-}
-
 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	if (!is_fixup && (regs->cp0_cause & 4)) {
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index b808773..0910b35 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -121,15 +121,6 @@ void __init plat_time_init(void)
 	setup_pit_timer();
 }
 
-/*
- * R4k counter based timer interrupt. Works on RM200-225 and possibly
- * others but not on RM400
- */
-static void __init sni_cpu_timer_setup(struct irqaction *irq)
-{
-        setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
-}
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
 	switch (sni_brd_type) {
@@ -139,15 +130,6 @@ void __init plat_timer_setup(struct irqaction *irq)
 	case SNI_BRD_MINITOWER:
 	        sni_a20r_timer_setup(irq);
 	        break;
-
-	case SNI_BRD_PCI_TOWER:
-	case SNI_BRD_RM200:
-	case SNI_BRD_PCI_MTOWER:
-	case SNI_BRD_PCI_DESKTOP:
-	case SNI_BRD_PCI_TOWER_CPLUS:
-	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        sni_cpu_timer_setup(irq);
-	        break;
 	}
 }
 
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 8ce0989..36c5f20 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -72,22 +72,6 @@ void __init plat_time_init(void)
 #endif
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(TX4927_IRQ_CPU_TIMER, irq);
-
-#ifdef CONFIG_TOSHIBA_RBTX4927
-	{
-		extern void toshiba_rbtx4927_timer_setup(struct irqaction
-							 *irq);
-		toshiba_rbtx4927_timer_setup(irq);
-	}
-#endif
-
-	return;
-}
-
-
 #ifdef DEBUG
 void print_cp0(char *key, int num, char *name, u32 val)
 {
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index b97102a..c7470fb 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -94,7 +94,6 @@
 #define TOSHIBA_RBTX4927_SETUP_EFWFU       ( 1 <<  3 )
 #define TOSHIBA_RBTX4927_SETUP_SETUP       ( 1 <<  4 )
 #define TOSHIBA_RBTX4927_SETUP_TIME_INIT   ( 1 <<  5 )
-#define TOSHIBA_RBTX4927_SETUP_TIMER_SETUP ( 1 <<  6 )
 #define TOSHIBA_RBTX4927_SETUP_PCIBIOS     ( 1 <<  7 )
 #define TOSHIBA_RBTX4927_SETUP_PCI1        ( 1 <<  8 )
 #define TOSHIBA_RBTX4927_SETUP_PCI2        ( 1 <<  9 )
@@ -108,7 +107,6 @@ static const u32 toshiba_rbtx4927_setup_debug_flag =
     (TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO |
      TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR |
      TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP |
-     TOSHIBA_RBTX4927_SETUP_TIME_INIT | TOSHIBA_RBTX4927_SETUP_TIMER_SETUP
      | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
      TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66);
 #endif
@@ -947,14 +945,6 @@ toshiba_rbtx4927_time_init(void)
 
 }
 
-void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq)
-{
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
-				       "-\n");
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
-				       "+\n");
-}
-
 static int __init toshiba_rbtx4927_rtc_init(void)
 {
 	static struct resource __initdata res = {
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
index 04f009c..3ba4101 100644
--- a/arch/mips/tx4938/common/setup.c
+++ b/arch/mips/tx4938/common/setup.c
@@ -43,8 +43,3 @@ plat_mem_setup(void)
 {
 	toshiba_rbtx4938_setup();
 }
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(TX4938_IRQ_CPU_TIMER, irq);
-}
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index 407cec2..8d760df 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -48,11 +48,6 @@ void __init plat_time_init(void)
 		mips_hpt_frequency = tclock / 4;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(TIMER_IRQ, irq);
-}
-
 void __init plat_mem_setup(void)
 {
 	vr41xx_calculate_clock_frequency();
diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h
index 4d43dbb..af08145 100644
--- a/include/asm-mips/sni.h
+++ b/include/asm-mips/sni.h
@@ -141,8 +141,6 @@ extern unsigned int sni_brd_type;
 #define A20R_PT_TIM0_ACK        0xbc050000
 #define A20R_PT_TIM1_ACK        0xbc060000
 
-#define SNI_MIPS_IRQ_CPU_TIMER  (MIPS_CPU_IRQ_BASE+7)
-
 #define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
 #define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)
 
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index cf76f4f..bc47af3 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -21,6 +21,7 @@
 #include <linux/ptrace.h>
 #include <linux/rtc.h>
 #include <linux/spinlock.h>
+#include <linux/clockchips.h>
 #include <linux/clocksource.h>
 
 extern spinlock_t rtc_lock;
@@ -83,4 +84,8 @@ static inline void mips_clockevent_init(void)
 }
 #endif
 
+extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
+extern void clockevent_set_clock(struct clock_event_device *cd,
+		unsigned int clock);
+
 #endif /* _ASM_TIME_H */