summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBen Dooks <ben-mtd@fluff.org>2008-04-15 11:36:18 +0100
committerDavid Woodhouse <dwmw2@infradead.org>2008-04-22 21:32:23 +0100
commit0916083210039bf3d186a87522cc806dc21b7097 (patch)
tree26b44bc647274ee2c2e42c1ff445a027e68bfad7
parent67e5a28b35254bbbcd5bfce61ef646709e059bbf (diff)
downloadop-kernel-dev-0916083210039bf3d186a87522cc806dc21b7097.zip
op-kernel-dev-0916083210039bf3d186a87522cc806dc21b7097.tar.gz
[MTD] [NAND] S3C2410 Fix previous nFCE suspend save patch
Commit 03680b1e00d146df718c8a4eac34438566b70c85 incorrectly was assuming S3C2410_NFCONF was being used to select the NAND chip. Fix this error by ising the sel_reg. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-rw-r--r--drivers/mtd/nand/s3c2410.c18
1 files changed, 8 insertions, 10 deletions
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f3fa1be..8557c68 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -119,8 +119,7 @@ struct s3c2410_nand_info {
void __iomem *sel_reg;
int sel_bit;
int mtd_count;
-
- unsigned long save_nfconf;
+ unsigned long save_sel;
enum s3c_cpu_type cpu_type;
};
@@ -810,15 +809,14 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
struct s3c2410_nand_info *info = platform_get_drvdata(dev);
if (info) {
- info->save_nfconf = readl(info->regs + S3C2410_NFCONF);
+ info->save_sel = readl(info->sel_reg);
/* For the moment, we must ensure nFCE is high during
* the time we are suspended. This really should be
* handled by suspending the MTDs we are using, but
* that is currently not the case. */
- writel(info->save_nfconf | info->sel_bit,
- info->regs + S3C2410_NFCONF);
+ writel(info->save_sel | info->sel_bit, info->sel_reg);
if (!allow_clk_stop(info))
clk_disable(info->clk);
@@ -830,7 +828,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
static int s3c24xx_nand_resume(struct platform_device *dev)
{
struct s3c2410_nand_info *info = platform_get_drvdata(dev);
- unsigned long nfconf;
+ unsigned long sel;
if (info) {
clk_enable(info->clk);
@@ -838,10 +836,10 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
/* Restore the state of the nFCE line. */
- nfconf = readl(info->regs + S3C2410_NFCONF);
- nfconf &= ~info->sel_bit;
- nfconf |= info->save_nfconf & info->sel_bit;
- writel(nfconf, info->regs + S3C2410_NFCONF);
+ sel = readl(info->sel_reg);
+ sel &= ~info->sel_bit;
+ sel |= info->save_sel & info->sel_bit;
+ writel(sel, info->sel_reg);
if (allow_clk_stop(info))
clk_disable(info->clk);
OpenPOWER on IntegriCloud