summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMagnus Damm <damm@igel.co.jp>2009-01-26 21:32:25 -0800
committerDavid S. Miller <davem@davemloft.net>2009-01-26 21:32:25 -0800
commita528079e01aa9cf6cddc852d5ab5cf4908974745 (patch)
tree249693c22d52f08e8b7e8a66fb22d8eb903ed632
parentdb1d7bf70f42124f73675fca62fe32f3ab1111b4 (diff)
downloadop-kernel-dev-a528079e01aa9cf6cddc852d5ab5cf4908974745.zip
op-kernel-dev-a528079e01aa9cf6cddc852d5ab5cf4908974745.tar.gz
smc91x: struct net_device_ops
Convert the smc91x driver to use struct net_device_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/smc91x.c22
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index d148406..fdcbaf8 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1768,6 +1768,19 @@ static const struct ethtool_ops smc_ethtool_ops = {
.set_eeprom = smc_ethtool_seteeprom,
};
+static const struct net_device_ops smc_netdev_ops = {
+ .ndo_open = smc_open,
+ .ndo_stop = smc_close,
+ .ndo_start_xmit = smc_hard_start_xmit,
+ .ndo_tx_timeout = smc_timeout,
+ .ndo_set_multicast_list = smc_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = smc_poll_controller,
+#endif
+};
+
/*
* smc_findirq
*
@@ -1977,16 +1990,9 @@ static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
/* Fill in the fields of the device structure with ethernet values. */
ether_setup(dev);
- dev->open = smc_open;
- dev->stop = smc_close;
- dev->hard_start_xmit = smc_hard_start_xmit;
- dev->tx_timeout = smc_timeout;
dev->watchdog_timeo = msecs_to_jiffies(watchdog);
- dev->set_multicast_list = smc_set_multicast_list;
+ dev->netdev_ops = &smc_netdev_ops;
dev->ethtool_ops = &smc_ethtool_ops;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = smc_poll_controller;
-#endif
tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev);
INIT_WORK(&lp->phy_configure, smc_phy_configure);
OpenPOWER on IntegriCloud