summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorVojtech Pavlik <vojtech@suse.cz>2006-04-07 20:00:27 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2006-10-18 11:36:11 -0700
commitccc4c7bbd6a2d47bf5899c2c8cf2e0d176a4dc0f (patch)
tree24bd806a028fe5e1ac75eb55fdad0927fc104f69
parentb5e4efe7e061ff52ac97b9fa45acca529d8daeea (diff)
downloadop-kernel-dev-ccc4c7bbd6a2d47bf5899c2c8cf2e0d176a4dc0f.zip
op-kernel-dev-ccc4c7bbd6a2d47bf5899c2c8cf2e0d176a4dc0f.tar.gz
Fix DMA resource allocation in ACPIPnP
The ACPIPnP implementation had the understanding of Linux resource flags very wrong, resulting in a nonfunctional implementation of DMA resource allocation. This was usually not a problem, since almost no on-board PnP devices use ISA DMA, with the exception of ECP parallel ports. Even with that, parallel port DMA is preconfigured by the BIOS, so this routine isn't normally called. Except in the case where somebody does 'rmmod parport_pc; modprobe parport_pc', where the rmmod case disables the ECP parallel port resources, and they need to be enabled again to initialize the module. This didn't work, resulting in a non-printing printer. The application doing exactly the above to force reprobing of printers is the YaST printer module. Thus without this fix YaST wedged the printer when configuring it, and was not able to print a test page. Reported-by: Ralf Flaxa <rf@suse.de> Reproduced-by: Jiri Dluhos <jdluhos@suse.cz> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/pnp/pnpacpi/rsparser.c41
1 files changed, 26 insertions, 15 deletions
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index dc79b0a..379048f 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -776,21 +776,32 @@ static void pnpacpi_encode_dma(struct acpi_resource *resource,
struct resource *p)
{
/* Note: pnp_assign_dma will copy pnp_dma->flags into p->flags */
- if (p->flags & IORESOURCE_DMA_COMPATIBLE)
- resource->data.dma.type = ACPI_COMPATIBILITY;
- else if (p->flags & IORESOURCE_DMA_TYPEA)
- resource->data.dma.type = ACPI_TYPE_A;
- else if (p->flags & IORESOURCE_DMA_TYPEB)
- resource->data.dma.type = ACPI_TYPE_B;
- else if (p->flags & IORESOURCE_DMA_TYPEF)
- resource->data.dma.type = ACPI_TYPE_F;
- if (p->flags & IORESOURCE_DMA_8BIT)
- resource->data.dma.transfer = ACPI_TRANSFER_8;
- else if (p->flags & IORESOURCE_DMA_8AND16BIT)
- resource->data.dma.transfer = ACPI_TRANSFER_8_16;
- else if (p->flags & IORESOURCE_DMA_16BIT)
- resource->data.dma.transfer = ACPI_TRANSFER_16;
- resource->data.dma.bus_master = p->flags & IORESOURCE_DMA_MASTER;
+ switch (p->flags & IORESOURCE_DMA_SPEED_MASK) {
+ case IORESOURCE_DMA_TYPEA:
+ resource->data.dma.type = ACPI_TYPE_A;
+ break;
+ case IORESOURCE_DMA_TYPEB:
+ resource->data.dma.type = ACPI_TYPE_B;
+ break;
+ case IORESOURCE_DMA_TYPEF:
+ resource->data.dma.type = ACPI_TYPE_F;
+ break;
+ default:
+ resource->data.dma.type = ACPI_COMPATIBILITY;
+ }
+
+ switch (p->flags & IORESOURCE_DMA_TYPE_MASK) {
+ case IORESOURCE_DMA_8BIT:
+ resource->data.dma.transfer = ACPI_TRANSFER_8;
+ break;
+ case IORESOURCE_DMA_8AND16BIT:
+ resource->data.dma.transfer = ACPI_TRANSFER_8_16;
+ break;
+ default:
+ resource->data.dma.transfer = ACPI_TRANSFER_16;
+ }
+
+ resource->data.dma.bus_master = !!(p->flags & IORESOURCE_DMA_MASTER);
resource->data.dma.channel_count = 1;
resource->data.dma.channels[0] = p->start;
}
OpenPOWER on IntegriCloud