summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2008-07-11 16:17:57 -0600
committerGrant Likely <grant.likely@secretlab.ca>2008-07-22 01:16:39 -0600
commit79c28acb2b7d66ca48d23e1c8b5e9e043aa634f8 (patch)
treec2fab8577f5c0dc83cf3a1fc94acbc30d9245651
parenta19dd1bd7df839c52a668abcf288c2239442c3c9 (diff)
downloadop-kernel-dev-79c28acb2b7d66ca48d23e1c8b5e9e043aa634f8.zip
op-kernel-dev-79c28acb2b7d66ca48d23e1c8b5e9e043aa634f8.tar.gz
of-bindings: Add binding documentation for SPI busses and devices
Add documentation about how to describe SPI busses in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
-rw-r--r--Documentation/powerpc/booting-without-of.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index aee243a..ee92fed 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,6 +59,7 @@ Table of Contents
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
r) MDIO on GPIOs
+ s) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -1881,6 +1882,62 @@ platforms are moved over to use the flattened-device-tree model.
&qe_pio_c 6>;
};
+ s) SPI (Serial Peripheral Interface) busses
+
+ SPI busses can be described with a node for the SPI master device
+ and a set of child nodes for each SPI slave on the bus. For this
+ discussion, it is assumed that the system's SPI controller is in
+ SPI master mode. This binding does not describe SPI controllers
+ in slave mode.
+
+ The SPI master node requires the following properties:
+ - #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+ - #size-cells - should be zero.
+ - compatible - name of SPI bus controller following generic names
+ recommended practice.
+ No other properties are required in the SPI bus node. It is assumed
+ that a driver for an SPI bus device will understand that it is an SPI bus.
+ However, the binding does not attempt to define the specific method for
+ assigning chip select numbers. Since SPI chip select configuration is
+ flexible and non-standardized, it is left out of this binding with the
+ assumption that board specific platform code will be used to manage
+ chip selects. Individual drivers can define additional properties to
+ support describing the chip select layout.
+
+ SPI slave nodes must be children of the SPI master node and can
+ contain the following properties.
+ - reg - (required) chip select address of device.
+ - compatible - (required) name of SPI device following generic names
+ recommended practice
+ - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+ - spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+ - spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+
+ SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
+
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
OpenPOWER on IntegriCloud