summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@linux-foundation.org>2007-10-16 12:15:50 -0700
committerJeff Garzik <jeff@garzik.org>2007-10-16 21:10:28 -0400
commit60b24b51799cc23313eed85fb874b70a6d02e2b7 (patch)
tree7ee3aef13967c65923a24962ece0e8af66a227a2
parent7fb7ac241162dc51ec0f7644d4a97b2855213c32 (diff)
downloadop-kernel-dev-60b24b51799cc23313eed85fb874b70a6d02e2b7.zip
op-kernel-dev-60b24b51799cc23313eed85fb874b70a6d02e2b7.tar.gz
skge: changing MTU while running causes problems
Rather than bring network down/up when changing MTU, only need to impact receiver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r--drivers/net/skge.c51
1 files changed, 44 insertions, 7 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index e593585..d5c10fd 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2544,6 +2544,15 @@ static int skge_up(struct net_device *dev)
return err;
}
+/* stop receiver */
+static void skge_rx_stop(struct skge_hw *hw, int port)
+{
+ skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_STOP);
+ skge_write32(hw, RB_ADDR(port ? Q_R2 : Q_R1, RB_CTRL),
+ RB_RST_SET|RB_DIS_OP_MD);
+ skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET);
+}
+
static int skge_down(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
@@ -2595,11 +2604,8 @@ static int skge_down(struct net_device *dev)
/* Reset the RAM Buffer async Tx queue */
skge_write8(hw, RB_ADDR(port == 0 ? Q_XA1 : Q_XA2, RB_CTRL), RB_RST_SET);
- /* stop receiver */
- skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_STOP);
- skge_write32(hw, RB_ADDR(port ? Q_R2 : Q_R1, RB_CTRL),
- RB_RST_SET|RB_DIS_OP_MD);
- skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET);
+
+ skge_rx_stop(hw, port);
if (hw->chip_id == CHIP_ID_GENESIS) {
skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
@@ -2782,7 +2788,11 @@ static void skge_tx_timeout(struct net_device *dev)
static int skge_change_mtu(struct net_device *dev, int new_mtu)
{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
int err;
+ u16 ctl, reg;
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
@@ -2792,13 +2802,40 @@ static int skge_change_mtu(struct net_device *dev, int new_mtu)
return 0;
}
- skge_down(dev);
+ skge_write32(hw, B0_IMSK, 0);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_stop_queue(dev);
+ napi_disable(&skge->napi);
+
+ ctl = gma_read16(hw, port, GM_GP_CTRL);
+ gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
+
+ skge_rx_clean(skge);
+ skge_rx_stop(hw, port);
dev->mtu = new_mtu;
- err = skge_up(dev);
+ reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
+ if (new_mtu > 1500)
+ reg |= GM_SMOD_JUMBO_ENA;
+ gma_write16(hw, port, GM_SERIAL_MODE, reg);
+
+ skge_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
+
+ err = skge_rx_fill(dev);
+ wmb();
+ if (!err)
+ skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+
if (err)
dev_close(dev);
+ else {
+ gma_write16(hw, port, GM_GP_CTRL, ctl);
+
+ napi_enable(&skge->napi);
+ netif_wake_queue(dev);
+ }
return err;
}
OpenPOWER on IntegriCloud