summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMartin Sperl <kernel@martin.sperl.org>2015-03-29 16:03:25 +0200
committerMark Brown <broonie@kernel.org>2015-03-29 09:53:30 -0700
commite3a2be3030e2fec27a2577d3c52203da090a4366 (patch)
tree91d1180ee0742a9403c2448cd1ceb5d1d967653c
parent1e4df62d46fa45109123f2b265b2d8146031db16 (diff)
downloadop-kernel-dev-e3a2be3030e2fec27a2577d3c52203da090a4366.zip
op-kernel-dev-e3a2be3030e2fec27a2577d3c52203da090a4366.tar.gz
spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message
To reduce the number of interrupts/message we fill the FIFO before enabling interrupts - for short messages this reduces the interrupt count from 2 to 1 interrupt. There have been rare cases where short (<200ns) chip-select switches with native CS have been observed during such operation, this is why this optimization is only enabled for GPIO-CS. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Tested-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r--drivers/spi/spi-bcm2835.c16
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 2e6533e..08e5406 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -203,6 +203,22 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
bs->tx_len = tfr->len;
bs->rx_len = tfr->len;
+ /* fill in fifo if we have gpio-cs
+ * note that there have been rare events where the native-CS
+ * flapped for <1us which may change the behaviour
+ * with gpio-cs this does not happen, so it is implemented
+ * only for this case
+ */
+ if (gpio_is_valid(spi->cs_gpio)) {
+ /* enable HW block, but without interrupts enabled
+ * this would triggern an immediate interrupt
+ */
+ bcm2835_wr(bs, BCM2835_SPI_CS,
+ cs | BCM2835_SPI_CS_TA);
+ /* fill in tx fifo as much as possible */
+ bcm2835_wr_fifo(bs);
+ }
+
/*
* Enable the HW block. This will immediately trigger a DONE (TX
* empty) interrupt, upon which we will fill the TX FIFO with the
OpenPOWER on IntegriCloud