summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 14:10:34 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 14:10:34 -0700
commit750e06992d49666a7589aac555eb3bb68e4dbb88 (patch)
tree7ee3d85adf256491dae89e5b049bb28ef1a1680c
parentd3ec4844d449cf7af9e749f73ba2052fb7b72fc2 (diff)
parent156e2d1adc03e17f18f98d297f7757fc6d93a589 (diff)
downloadop-kernel-dev-750e06992d49666a7589aac555eb3bb68e4dbb88.zip
op-kernel-dev-750e06992d49666a7589aac555eb3bb68e4dbb88.tar.gz
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm78) Become the maintainer hwmon: (lm78) Make ISA interface depend on CONFIG_ISA hwmon: (lm78) Avoid forward declarations hwmon: (sht15) Correct a comment mistake hwmon: (max1111) Avoid extra memory allocations hwmon: (it87) Add chassis intrusion detection support hwmon: (via-cputemp) Add VID reporting support hwmon-vid: Add support for VIA family 6 model D CPU hwmon: New driver sch5636 hwmon: (sch5627) Factor out some code shared with sch5636 driver
-rw-r--r--Documentation/hwmon/it873
-rw-r--r--Documentation/hwmon/lm783
-rw-r--r--Documentation/hwmon/sch563631
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/hwmon/Kconfig21
-rw-r--r--drivers/hwmon/Makefile2
-rw-r--r--drivers/hwmon/hwmon-vid.c42
-rw-r--r--drivers/hwmon/it87.c29
-rw-r--r--drivers/hwmon/lm78.c305
-rw-r--r--drivers/hwmon/max1111.c27
-rw-r--r--drivers/hwmon/sch5627.c334
-rw-r--r--drivers/hwmon/sch5636.c539
-rw-r--r--drivers/hwmon/sch56xx-common.c340
-rw-r--r--drivers/hwmon/sch56xx-common.h24
-rw-r--r--drivers/hwmon/sht15.c2
-rw-r--r--drivers/hwmon/via-cputemp.c44
16 files changed, 1285 insertions, 468 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 38425f0..6f496a5 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -76,7 +76,8 @@ IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
include an 'environment controller' with 3 temperature sensors, 3 fan
-rotation speed sensors, 8 voltage sensors, and associated alarms.
+rotation speed sensors, 8 voltage sensors, associated alarms, and chassis
+intrusion detection.
The IT8712F and IT8716F additionally feature VID inputs, used to report
the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78
index 60932e2..2bdc881 100644
--- a/Documentation/hwmon/lm78
+++ b/Documentation/hwmon/lm78
@@ -13,7 +13,8 @@ Supported chips:
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
-Author: Frodo Looijaard <frodol@dds.nl>
+Authors: Frodo Looijaard <frodol@dds.nl>
+ Jean Delvare <khali@linux-fr.org>
Description
-----------
diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636
new file mode 100644
index 0000000..f83bd1c
--- /dev/null
+++ b/Documentation/hwmon/sch5636
@@ -0,0 +1,31 @@
+Kernel driver sch5636
+=====================
+
+Supported chips:
+ * SMSC SCH5636
+ Prefix: 'sch5636'
+ Addresses scanned: none, address read from Super I/O config space
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+hardware monitoring solutions, allowing motherboard manufacturers to create
+their own custom hwmon solution based upon the SCH5636.
+
+Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based
+hwmon solution. The sch5636 driver runs a sanity check on loading to ensure
+it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based
+hwmon solution.
+
+The Fujitsu Theseus can monitor up to 5 voltages, 8 fans and 16
+temperatures. Note that the driver detects how many fan headers /
+temperature sensors are actually implemented on the motherboard, so you will
+likely see fewer temperature and fan inputs.
+
+An application note describing the Theseus' registers, as well as an
+application note describing the protocol for communicating with the
+microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/MAINTAINERS b/MAINTAINERS
index efe0a4b..91e5cc7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3960,6 +3960,13 @@ L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/lm73.c
+LM78 HARDWARE MONITOR DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/lm78
+F: drivers/hwmon/lm78.c
+
LM83 HARDWARE MONITOR DRIVER
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5f888f7..0598cd2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1041,8 +1041,13 @@ config SENSORS_SMSC47B397
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_SCH56XX_COMMON
+ tristate
+ default n
+
config SENSORS_SCH5627
tristate "SMSC SCH5627"
+ select SENSORS_SCH56XX_COMMON
help
If you say yes here you get support for the hardware monitoring
features of the SMSC SCH5627 Super-I/O chip.
@@ -1050,6 +1055,21 @@ config SENSORS_SCH5627
This driver can also be built as a module. If so, the module
will be called sch5627.
+config SENSORS_SCH5636
+ tristate "SMSC SCH5636"
+ select SENSORS_SCH56XX_COMMON
+ help
+ SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+ hardware monitoring solutions, allowing motherboard manufacturers to
+ create their own custom hwmon solution based upon the SCH5636.
+
+ Currently this driver only supports the Fujitsu Theseus SCH5636 based
+ hwmon solution. Say yes here if you want support for the Fujitsu
+ Theseus' hardware monitoring features.
+
+ This driver can also be built as a module. If so, the module
+ will be called sch5636.
+
config SENSORS_ADS1015
tristate "Texas Instruments ADS1015"
depends on I2C
@@ -1142,6 +1162,7 @@ config SENSORS_TWL4030_MADC
config SENSORS_VIA_CPUTEMP
tristate "VIA CPU temperature sensor"
depends on X86
+ select HWMON_VID
help
If you say yes here you get support for the temperature
sensor inside your CPU. Supported are all known variants of
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 28061cf..d7995a1 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -95,7 +95,9 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
+obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
+obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SHT21) += sht21.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index c8195a0..932da8a 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -140,7 +140,11 @@ int vid_from_reg(int val, u8 vrm)
return(val & 0x10 ? 975 - (val & 0xF) * 25 :
1750 - val * 50);
case 13:
+ case 131:
val &= 0x3f;
+ /* Exception for Eden ULV 500 MHz */
+ if (vrm == 131 && val == 0x3f)
+ val++;
return(1708 - val * 16);
case 14: /* Intel Core */
/* compute in uV, round to mV */
@@ -205,11 +209,45 @@ static struct vrm_model vrm_models[] = {
{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */
{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */
{X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */
- {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */
+ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7-M, C7, Eden (Esther) */
+ {X86_VENDOR_CENTAUR, 0x6, 0xD, ANY, 134}, /* C7-D, C7-M, C7, Eden (Esther) */
{X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */
};
+/*
+ * Special case for VIA model D: there are two different possible
+ * VID tables, so we have to figure out first, which one must be
+ * used. This resolves temporary drm value 134 to 14 (Intel Core
+ * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID
+ * + quirk for Eden ULV 500 MHz).
+ * Note: something similar might be needed for model A, I'm not sure.
+ */
+static u8 get_via_model_d_vrm(void)
+{
+ unsigned int vid, brand, dummy;
+ static const char *brands[4] = {
+ "C7-M", "C7", "Eden", "C7-D"
+ };
+
+ rdmsr(0x198, dummy, vid);
+ vid &= 0xff;
+
+ rdmsr(0x1154, brand, dummy);
+ brand = ((brand >> 4) ^ (brand >> 2)) & 0x03;
+
+ if (vid > 0x3f) {
+ pr_info("Using %d-bit VID table for VIA %s CPU\n",
+ 7, brands[brand]);
+ return 14;
+ } else {
+ pr_info("Using %d-bit VID table for VIA %s CPU\n",
+ 6, brands[brand]);
+ /* Enable quirk for Eden */
+ return brand == 2 ? 131 : 13;
+ }
+}
+
static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
{
int i = 0;
@@ -247,6 +285,8 @@ u8 vid_which_vrm(void)
eff_model += ((eax & 0x000F0000)>>16)<<4;
}
vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
+ if (vrm_ret == 134)
+ vrm_ret = get_via_model_d_vrm();
if (vrm_ret == 0)
pr_info("Unknown VRM version of your x86 CPU\n");
return vrm_ret;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5f52477..d912649 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1172,6 +1172,32 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
struct it87_data *data = it87_update_device(dev);
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
+
+static ssize_t clear_intrusion(struct device *dev, struct device_attribute
+ *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+ int config;
+
+ if (strict_strtol(buf, 10, &val) < 0 || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ config = it87_read_value(data, IT87_REG_CONFIG);
+ if (config < 0) {
+ count = config;
+ } else {
+ config |= 1 << 5;
+ it87_write_value(data, IT87_REG_CONFIG, config);
+ /* Invalidate cache to force re-read */
+ data->valid = 0;
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
@@ -1188,6 +1214,8 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+ show_alarm, clear_intrusion, 4);
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -1350,6 +1378,7 @@ static struct attribute *it87_attributes[] = {
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
+ &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_name.attr,
NULL
};
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 4cb24ea..6df0b46 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -2,7 +2,7 @@
lm78.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (c) 2007, 2011 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -26,23 +26,21 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
-#include <linux/io.h>
-/* ISA device, if found */
-static struct platform_device *pdev;
+#ifdef CONFIG_ISA
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#endif
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
-
enum chips { lm78, lm79 };
/* Many LM78 constants specified below */
@@ -143,50 +141,12 @@ struct lm78_data {
};
-static int lm78_i2c_detect(struct i2c_client *client,
- struct i2c_board_info *info);
-static int lm78_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int lm78_i2c_remove(struct i2c_client *client);
-
-static int __devinit lm78_isa_probe(struct platform_device *pdev);
-static int __devexit lm78_isa_remove(struct platform_device *pdev);
-
static int lm78_read_value(struct lm78_data *data, u8 reg);
static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value);
static struct lm78_data *lm78_update_device(struct device *dev);
static void lm78_init_device(struct lm78_data *data);
-static const struct i2c_device_id lm78_i2c_id[] = {
- { "lm78", lm78 },
- { "lm79", lm79 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, lm78_i2c_id);
-
-static struct i2c_driver lm78_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "lm78",
- },
- .probe = lm78_i2c_probe,
- .remove = lm78_i2c_remove,
- .id_table = lm78_i2c_id,
- .detect = lm78_i2c_detect,
- .address_list = normal_i2c,
-};
-
-static struct platform_driver lm78_isa_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "lm78",
- },
- .probe = lm78_isa_probe,
- .remove = __devexit_p(lm78_isa_remove),
-};
-
-
/* 7 Voltages */
static ssize_t show_in(struct device *dev, struct device_attribute *da,
char *buf)
@@ -514,6 +474,16 @@ static const struct attribute_group lm78_group = {
.attrs = lm78_attributes,
};
+/*
+ * ISA related code
+ */
+#ifdef CONFIG_ISA
+
+/* ISA device, if found */
+static struct platform_device *pdev;
+
+static unsigned short isa_address = 0x290;
+
/* I2C devices get this name attribute automatically, but for ISA devices
we must create it by ourselves. */
static ssize_t show_name(struct device *dev, struct device_attribute
@@ -525,6 +495,11 @@ static ssize_t show_name(struct device *dev, struct device_attribute
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct lm78_data *lm78_data_if_isa(void)
+{
+ return pdev ? platform_get_drvdata(pdev) : NULL;
+}
+
/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
{
@@ -558,12 +533,24 @@ static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
return 1;
}
+#else /* !CONFIG_ISA */
+
+static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
+{
+ return 0;
+}
+
+static struct lm78_data *lm78_data_if_isa(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_ISA */
static int lm78_i2c_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
int i;
- struct lm78_data *isa = pdev ? platform_get_drvdata(pdev) : NULL;
+ struct lm78_data *isa = lm78_data_if_isa();
const char *client_name;
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
@@ -663,76 +650,24 @@ static int lm78_i2c_remove(struct i2c_client *client)
return 0;
}
-static int __devinit lm78_isa_probe(struct platform_device *pdev)
-{
- int err;
- struct lm78_data *data;
- struct resource *res;
-
- /* Reserve the ISA region */
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
- err = -EBUSY;
- goto exit;
- }
-
- if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit_release_region;
- }
- mutex_init(&data->lock);
- data->isa_addr = res->start;
- platform_set_drvdata(pdev, data);
-
- if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) {
- data->type = lm79;
- data->name = "lm79";
- } else {
- data->type = lm78;
- data->name = "lm78";
- }
-
- /* Initialize the LM78 chip */
- lm78_init_device(data);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group))
- || (err = device_create_file(&pdev->dev, &dev_attr_name)))
- goto exit_remove_files;
-
- data->hwmon_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
- exit_remove_files:
- sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
- device_remove_file(&pdev->dev, &dev_attr_name);
- kfree(data);
- exit_release_region:
- release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
- exit:
- return err;
-}
-
-static int __devexit lm78_isa_remove(struct platform_device *pdev)
-{
- struct lm78_data *data = platform_get_drvdata(pdev);
- struct resource *res;
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
- device_remove_file(&pdev->dev, &dev_attr_name);
- kfree(data);
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+static const struct i2c_device_id lm78_i2c_id[] = {
+ { "lm78", lm78 },
+ { "lm79", lm79 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm78_i2c_id);
- return 0;
-}
+static struct i2c_driver lm78_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm78",
+ },
+ .probe = lm78_i2c_probe,
+ .remove = lm78_i2c_remove,
+ .id_table = lm78_i2c_id,
+ .detect = lm78_i2c_detect,
+ .address_list = normal_i2c,
+};
/* The SMBus locks itself, but ISA access must be locked explicitly!
We don't want to lock the whole ISA bus, so we lock each client
@@ -743,6 +678,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg)
{
struct i2c_client *client = data->client;
+#ifdef CONFIG_ISA
if (!client) { /* ISA device */
int res;
mutex_lock(&data->lock);
@@ -751,6 +687,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg)
mutex_unlock(&data->lock);
return res;
} else
+#endif
return i2c_smbus_read_byte_data(client, reg);
}
@@ -765,6 +702,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value)
{
struct i2c_client *client = data->client;
+#ifdef CONFIG_ISA
if (!client) { /* ISA device */
mutex_lock(&data->lock);
outb_p(reg, data->isa_addr + LM78_ADDR_REG_OFFSET);
@@ -772,6 +710,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value)
mutex_unlock(&data->lock);
return 0;
} else
+#endif
return i2c_smbus_write_byte_data(client, reg, value);
}
@@ -849,6 +788,88 @@ static struct lm78_data *lm78_update_device(struct device *dev)
return data;
}
+#ifdef CONFIG_ISA
+static int __devinit lm78_isa_probe(struct platform_device *pdev)
+{
+ int err;
+ struct lm78_data *data;
+ struct resource *res;
+
+ /* Reserve the ISA region */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit_release_region;
+ }
+ mutex_init(&data->lock);
+ data->isa_addr = res->start;
+ platform_set_drvdata(pdev, data);
+
+ if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) {
+ data->type = lm79;
+ data->name = "lm79";
+ } else {
+ data->type = lm78;
+ data->name = "lm78";
+ }
+
+ /* Initialize the LM78 chip */
+ lm78_init_device(data);
+
+ /* Register sysfs hooks */
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group))
+ || (err = device_create_file(&pdev->dev, &dev_attr_name)))
+ goto exit_remove_files;
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+ exit_remove_files:
+ sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ kfree(data);
+ exit_release_region:
+ release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+ exit:
+ return err;
+}
+
+static int __devexit lm78_isa_remove(struct platform_device *pdev)
+{
+ struct lm78_data *data = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ kfree(data);
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+
+ return 0;
+}
+
+static struct platform_driver lm78_isa_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "lm78",
+ },
+ .probe = lm78_isa_probe,
+ .remove = __devexit_p(lm78_isa_remove),
+};
+
/* return 1 if a supported chip is found, 0 otherwise */
static int __init lm78_isa_found(unsigned short address)
{
@@ -969,12 +990,10 @@ static int __init lm78_isa_device_add(unsigned short address)
return err;
}
-static int __init sm_lm78_init(void)
+static int __init lm78_isa_register(void)
{
int res;
- /* We register the ISA device first, so that we can skip the
- * registration of an I2C interface to the same device. */
if (lm78_isa_found(isa_address)) {
res = platform_driver_register(&lm78_isa_driver);
if (res)
@@ -986,32 +1005,62 @@ static int __init sm_lm78_init(void)
goto exit_unreg_isa_driver;
}
- res = i2c_add_driver(&lm78_driver);
- if (res)
- goto exit_unreg_isa_device;
-
return 0;
- exit_unreg_isa_device:
- platform_device_unregister(pdev);
exit_unreg_isa_driver:
platform_driver_unregister(&lm78_isa_driver);
exit:
return res;
}
-static void __exit sm_lm78_exit(void)
+static void lm78_isa_unregister(void)
{
if (pdev) {
platform_device_unregister(pdev);
platform_driver_unregister(&lm78_isa_driver);
}
- i2c_del_driver(&lm78_driver);
}
+#else /* !CONFIG_ISA */
+static int __init lm78_isa_register(void)
+{
+ return 0;
+}
+
+static void lm78_isa_unregister(void)
+{
+}
+#endif /* CONFIG_ISA */
+static int __init sm_lm78_init(void)
+{
+ int res;
+
+ /* We register the ISA device first, so that we can skip the
+ * registration of an I2C interface to the same device. */
+ res = lm78_isa_register();
+ if (res)
+ goto exit;
+
+ res = i2c_add_driver(&lm78_driver);
+ if (res)
+ goto exit_unreg_isa_device;
+
+ return 0;
+
+ exit_unreg_isa_device:
+ lm78_isa_unregister();
+ exit:
+ return res;
+}
+
+static void __exit sm_lm78_exit(void)
+{
+ lm78_isa_unregister();
+ i2c_del_driver(&lm78_driver);
+}
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Frodo Looijaard, Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("LM78/LM79 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
index 14335bb..c97b78e 100644
--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -38,8 +38,8 @@ struct max1111_data {
struct device *hwmon_dev;
struct spi_message msg;
struct spi_transfer xfer[2];
- uint8_t *tx_buf;
- uint8_t *rx_buf;
+ uint8_t tx_buf[MAX1111_TX_BUF_SIZE];
+ uint8_t rx_buf[MAX1111_RX_BUF_SIZE];
struct mutex drvdata_lock;
/* protect msg, xfer and buffers from multiple access */
};
@@ -131,33 +131,23 @@ static const struct attribute_group max1111_attr_group = {
.attrs = max1111_attributes,
};
-static int setup_transfer(struct max1111_data *data)
+static int __devinit setup_transfer(struct max1111_data *data)
{
struct spi_message *m;
struct spi_transfer *x;
- data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL);
- if (!data->tx_buf)
- return -ENOMEM;
-
- data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL);
- if (!data->rx_buf) {
- kfree(data->tx_buf);
- return -ENOMEM;
- }
-
m = &data->msg;
x = &data->xfer[0];
spi_message_init(m);
x->tx_buf = &data->tx_buf[0];
- x->len = 1;
+ x->len = MAX1111_TX_BUF_SIZE;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &data->rx_buf[0];
- x->len = 2;
+ x->len = MAX1111_RX_BUF_SIZE;
spi_message_add_tail(x, m);
return 0;
@@ -192,7 +182,7 @@ static int __devinit max1111_probe(struct spi_device *spi)
err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
if (err) {
dev_err(&spi->dev, "failed to create attribute group\n");
- goto err_free_all;
+ goto err_free_data;
}
data->hwmon_dev = hwmon_device_register(&spi->dev);
@@ -209,9 +199,6 @@ static int __devinit max1111_probe(struct spi_device *spi)
err_remove:
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
-err_free_all:
- kfree(data->rx_buf);
- kfree(data->tx_buf);
err_free_data:
kfree(data);
return err;
@@ -224,8 +211,6 @@ static int __devexit max1111_remove(struct spi_device *spi)
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
mutex_destroy(&data->drvdata_lock);
- kfree(data->rx_buf);
- kfree(data->tx_buf);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 3494a4c..e3b5c60 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -28,33 +28,15 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
+#include "sch56xx-common.h"
#define DRVNAME "sch5627"
#define DEVNAME DRVNAME /* We only support one model */
-#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */
-#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */
-#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
-
-#define SIO_REG_LDSEL 0x07 /* Logical device select */
-#define SIO_REG_DEVID 0x20 /* Device ID */
-#define SIO_REG_ENABLE 0x30 /* Logical device enable */
-#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */
-
-#define SIO_SCH5627_ID 0xC6 /* Chipset ID */
-
-#define REGION_LENGTH 9
-
#define SCH5627_HWMON_ID 0xa5
#define SCH5627_COMPANY_ID 0x5c
#define SCH5627_PRIMARY_ID 0xa0
-#define SCH5627_CMD_READ 0x02
-#define SCH5627_CMD_WRITE 0x03
-
#define SCH5627_REG_BUILD_CODE 0x39
#define SCH5627_REG_BUILD_ID 0x3a
#define SCH5627_REG_HWMON_ID 0x3c
@@ -111,182 +93,6 @@ struct sch5627_data {
u16 in[SCH5627_NO_IN];
};
-static struct platform_device *sch5627_pdev;
-
-/* Super I/O functions */
-static inline int superio_inb(int base, int reg)
-{
- outb(reg, base);
- return inb(base + 1);
-}
-
-static inline int superio_enter(int base)
-{
- /* Don't step on other drivers' I/O space by accident */
- if (!request_muxed_region(base, 2, DRVNAME)) {
- pr_err("I/O address 0x%04x already in use\n", base);
- return -EBUSY;
- }
-
- outb(SIO_UNLOCK_KEY, base);
-
- return 0;
-}
-
-static inline void superio_select(int base, int ld)
-{
- outb(SIO_REG_LDSEL, base);
- outb(ld, base + 1);
-}
-
-static inline void superio_exit(int base)
-{
- outb(SIO_LOCK_KEY, base);
- release_region(base, 2);
-}
-
-static int sch5627_send_cmd(struct sch5627_data *data, u8 cmd, u16 reg, u8 v)
-{
- u8 val;
- int i;
- /*
- * According to SMSC for the commands we use the maximum time for
- * the EM to respond is 15 ms, but testing shows in practice it
- * responds within 15-32 reads, so we first busy poll, and if
- * that fails sleep a bit and try again until we are way past
- * the 15 ms maximum response time.
- */
- const int max_busy_polls = 64;
- const int max_lazy_polls = 32;
-
- /* (Optional) Write-Clear the EC to Host Mailbox Register */
- val = inb(data->addr + 1);
- outb(val, data->addr + 1);
-
- /* Set Mailbox Address Pointer to first location in Region 1 */
- outb(0x00, data->addr + 2);
- outb(0x80, data->addr + 3);
-
- /* Write Request Packet Header */
- outb(cmd, data->addr + 4); /* VREG Access Type read:0x02 write:0x03 */
- outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
- outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
-
- /* Write Value field */
- if (cmd == SCH5627_CMD_WRITE)
- outb(v, data->addr + 4);
-
- /* Write Address field */
- outb(reg & 0xff, data->addr + 6);
- outb(reg >> 8, data->addr + 7);
-
- /* Execute the Random Access Command */
- outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
-
- /* EM Interface Polling "Algorithm" */
- for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
- if (i >= max_busy_polls)
- msleep(1);
- /* Read Interrupt source Register */
- val = inb(data->addr + 8);
- /* Write Clear the interrupt source bits */
- if (val)
- outb(val, data->addr + 8);
- /* Command Completed ? */
- if (val & 0x01)
- break;
- }
- if (i == max_busy_polls + max_lazy_polls) {
- pr_err("Max retries exceeded reading virtual "
- "register 0x%04hx (%d)\n", reg, 1);
- return -EIO;
- }
-
- /*
- * According to SMSC we may need to retry this, but sofar I've always
- * seen this succeed in 1 try.
- */
- for (i = 0; i < max_busy_polls; i++) {
- /* Read EC-to-Host Register */
- val = inb(data->addr + 1);
- /* Command Completed ? */
- if (val == 0x01)
- break;
-
- if (i == 0)
- pr_warn("EC reports: 0x%02x reading virtual register "
- "0x%04hx\n", (unsigned int)val, reg);
- }
- if (i == max_busy_polls) {
- pr_err("Max retries exceeded reading virtual "
- "register 0x%04hx (%d)\n", reg, 2);
- return -EIO;
- }
-
- /*
- * According to the SMSC app note we should now do:
- *
- * Set Mailbox Address Pointer to first location in Region 1 *
- * outb(0x00, data->addr + 2);
- * outb(0x80, data->addr + 3);
- *
- * But if we do that things don't work, so let's not.
- */
-
- /* Read Value field */
- if (cmd == SCH5627_CMD_READ)
- return inb(data->addr + 4);
-
- return 0;
-}
-
-static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
-{
- return sch5627_send_cmd(data, SCH5627_CMD_READ, reg, 0);
-}
-
-static int sch5627_write_virtual_reg(struct sch5627_data *data,
- u16 reg, u8 val)
-{
- return sch5627_send_cmd(data, SCH5627_CMD_WRITE, reg, val);
-}
-
-static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
-{
- int lsb, msb;
-
- /* Read LSB first, this will cause the matching MSB to be latched */
- lsb = sch5627_read_virtual_reg(data, reg);
- if (lsb < 0)
- return lsb;
-
- msb = sch5627_read_virtual_reg(data, reg + 1);
- if (msb < 0)
- return msb;
-
- return lsb | (msb << 8);
-}
-
-static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
- u16 lsn_reg, int high_nibble)
-{
- int msb, lsn;
-
- /* Read MSB first, this will cause the matching LSN to be latched */
- msb = sch5627_read_virtual_reg(data, msb_reg);
- if (msb < 0)
- return msb;
-
- lsn = sch5627_read_virtual_reg(data, lsn_reg);
- if (lsn < 0)
- return lsn;
-
- if (high_nibble)
- return (msb << 4) | (lsn >> 4);
- else
- return (msb << 4) | (lsn & 0x0f);
-}
-
static struct sch5627_data *sch5627_update_device(struct device *dev)
{
struct sch5627_data *data = dev_get_drvdata(dev);
@@ -297,7 +103,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
/* Trigger a Vbat voltage measurement every 5 minutes */
if (time_after(jiffies, data->last_battery + 300 * HZ)) {
- sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+ sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
data->control | 0x10);
data->last_battery = jiffies;
}
@@ -305,7 +111,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
/* Cache the values for 1 second */
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
for (i = 0; i < SCH5627_NO_TEMPS; i++) {
- val = sch5627_read_virtual_reg12(data,
+ val = sch56xx_read_virtual_reg12(data->addr,
SCH5627_REG_TEMP_MSB[i],
SCH5627_REG_TEMP_LSN[i],
SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
@@ -317,7 +123,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
}
for (i = 0; i < SCH5627_NO_FANS; i++) {
- val = sch5627_read_virtual_reg16(data,
+ val = sch56xx_read_virtual_reg16(data->addr,
SCH5627_REG_FAN[i]);
if (unlikely(val < 0)) {
ret = ERR_PTR(val);
@@ -327,7 +133,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
}
for (i = 0; i < SCH5627_NO_IN; i++) {
- val = sch5627_read_virtual_reg12(data,
+ val = sch56xx_read_virtual_reg12(data->addr,
SCH5627_REG_IN_MSB[i],
SCH5627_REG_IN_LSN[i],
SCH5627_REG_IN_HIGH_NIBBLE[i]);
@@ -355,18 +161,21 @@ static int __devinit sch5627_read_limits(struct sch5627_data *data)
* Note what SMSC calls ABS, is what lm_sensors calls max
* (aka high), and HIGH is what lm_sensors calls crit.
*/
- val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5627_REG_TEMP_ABS[i]);
if (val < 0)
return val;
data->temp_max[i] = val;
- val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5627_REG_TEMP_HIGH[i]);
if (val < 0)
return val;
data->temp_crit[i] = val;
}
for (i = 0; i < SCH5627_NO_FANS; i++) {
- val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
+ val = sch56xx_read_virtual_reg16(data->addr,
+ SCH5627_REG_FAN_MIN[i]);
if (val < 0)
return val;
data->fan_min[i] = val;
@@ -667,7 +476,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
- val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
+ val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID);
if (val < 0) {
err = val;
goto error;
@@ -679,7 +488,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
goto error;
}
- val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
+ val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID);
if (val < 0) {
err = val;
goto error;
@@ -691,7 +500,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
goto error;
}
- val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
+ val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID);
if (val < 0) {
err = val;
goto error;
@@ -703,25 +512,28 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
goto error;
}
- build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
+ build_code = sch56xx_read_virtual_reg(data->addr,
+ SCH5627_REG_BUILD_CODE);
if (build_code < 0) {
err = build_code;
goto error;
}
- build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
+ build_id = sch56xx_read_virtual_reg16(data->addr,
+ SCH5627_REG_BUILD_ID);
if (build_id < 0) {
err = build_id;
goto error;
}
- hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
+ hwmon_rev = sch56xx_read_virtual_reg(data->addr,
+ SCH5627_REG_HWMON_REV);
if (hwmon_rev < 0) {
err = hwmon_rev;
goto error;
}
- val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
+ val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL);
if (val < 0) {
err = val;
goto error;
@@ -734,7 +546,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
}
/* Trigger a Vbat voltage measurement, so that we get a valid reading
the first time we read Vbat */
- sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+ sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
data->control | 0x10);
data->last_battery = jiffies;
@@ -746,6 +558,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
if (err)
goto error;
+ pr_info("found %s chip at %#hx\n", DEVNAME, data->addr);
pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
build_code, build_id, hwmon_rev);
@@ -768,85 +581,6 @@ error:
return err;
}
-static int __init sch5627_find(int sioaddr, unsigned short *address)
-{
- u8 devid;
- int err = superio_enter(sioaddr);
- if (err)
- return err;
-
- devid = superio_inb(sioaddr, SIO_REG_DEVID);
- if (devid != SIO_SCH5627_ID) {
- pr_debug("Unsupported device id: 0x%02x\n",
- (unsigned int)devid);
- err = -ENODEV;
- goto exit;
- }
-
- superio_select(sioaddr, SIO_SCH5627_EM_LD);
-
- if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
- pr_warn("Device not activated\n");
- err = -ENODEV;
- goto exit;
- }
-
- /*
- * Warning the order of the low / high byte is the other way around
- * as on most other superio devices!!
- */
- *address = superio_inb(sioaddr, SIO_REG_ADDR) |
- superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
- if (*address == 0) {
- pr_warn("Base address not set\n");
- err = -ENODEV;
- goto exit;
- }
-
- pr_info("Found %s chip at %#hx\n", DEVNAME, *address);
-exit:
- superio_exit(sioaddr);
- return err;
-}
-
-static int __init sch5627_device_add(unsigned short address)
-{
- struct resource res = {
- .start = address,
- .end = address + REGION_LENGTH - 1,
- .flags = IORESOURCE_IO,
- };
- int err;
-
- sch5627_pdev = platform_device_alloc(DRVNAME, address);
- if (!sch5627_pdev)
- return -ENOMEM;
-
- res.name = sch5627_pdev->name;
- err = acpi_check_resource_conflict(&res);
- if (err)
- goto exit_device_put;
-
- err = platform_device_add_resources(sch5627_pdev, &res, 1);
- if (err) {
- pr_err("Device resource addition failed\n");
- goto exit_device_put;
- }
-
- err = platform_device_add(sch5627_pdev);
- if (err) {
- pr_err("Device addition failed\n");
- goto exit_device_put;
- }
-
- return 0;
-
-exit_device_put:
- platform_device_put(sch5627_pdev);
-
- return err;
-}
-
static struct platform_driver sch5627_driver = {
.driver = {
.owner = THIS_MODULE,
@@ -858,31 +592,11 @@ static struct platform_driver sch5627_driver = {
static int __init sch5627_init(void)
{
- int err = -ENODEV;
- unsigned short address;
-
- if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address))
- goto exit;
-
- err = platform_driver_register(&sch5627_driver);
- if (err)
- goto exit;
-
- err = sch5627_device_add(address);
- if (err)
- goto exit_driver;
-
- return 0;
-
-exit_driver:
- platform_driver_unregister(&sch5627_driver);
-exit:
- return err;
+ return platform_driver_register(&sch5627_driver);
}
static void __exit sch5627_exit(void)
{
- platform_device_unregister(sch5627_pdev);
platform_driver_unregister(&sch5627_driver);
}
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
new file mode 100644
index 0000000..244407a
--- /dev/null
+++ b/drivers/hwmon/sch5636.c
@@ -0,0 +1,539 @@
+/***************************************************************************
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include "sch56xx-common.h"
+
+#define DRVNAME "sch5636"
+#define DEVNAME "theseus" /* We only support one model for now */
+
+#define SCH5636_REG_FUJITSU_ID 0x780
+#define SCH5636_REG_FUJITSU_REV 0x783
+
+#define SCH5636_NO_INS 5
+#define SCH5636_NO_TEMPS 16
+#define SCH5636_NO_FANS 8
+
+static const u16 SCH5636_REG_IN_VAL[SCH5636_NO_INS] = {
+ 0x22, 0x23, 0x24, 0x25, 0x189 };
+static const u16 SCH5636_REG_IN_FACTORS[SCH5636_NO_INS] = {
+ 4400, 1500, 4000, 4400, 16000 };
+static const char * const SCH5636_IN_LABELS[SCH5636_NO_INS] = {
+ "3.3V", "VREF", "VBAT", "3.3AUX", "12V" };
+
+static const u16 SCH5636_REG_TEMP_VAL[SCH5636_NO_TEMPS] = {
+ 0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181,
+ 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C };
+#define SCH5636_REG_TEMP_CTRL(i) (0x790 + (i))
+#define SCH5636_TEMP_WORKING 0x01
+#define SCH5636_TEMP_ALARM 0x02
+#define SCH5636_TEMP_DEACTIVATED 0x80
+
+static const u16 SCH5636_REG_FAN_VAL[SCH5636_NO_FANS] = {
+ 0x2C, 0x2E, 0x30, 0x32, 0x62, 0x64, 0x66, 0x68 };
+#define SCH5636_REG_FAN_CTRL(i) (0x880 + (i))
+/* FAULT in datasheet, but acts as an alarm */
+#define SCH5636_FAN_ALARM 0x04
+#define SCH5636_FAN_NOT_PRESENT 0x08
+#define SCH5636_FAN_DEACTIVATED 0x80
+
+
+struct sch5636_data {
+ unsigned short addr;
+ struct device *hwmon_dev;
+
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ u8 in[SCH5636_NO_INS];
+ u8 temp_val[SCH5636_NO_TEMPS];
+ u8 temp_ctrl[SCH5636_NO_TEMPS];
+ u16 fan_val[SCH5636_NO_FANS];
+ u8 fan_ctrl[SCH5636_NO_FANS];
+};
+
+static struct sch5636_data *sch5636_update_device(struct device *dev)
+{
+ struct sch5636_data *data = dev_get_drvdata(dev);
+ struct sch5636_data *ret = data;
+ int i, val;
+
+ mutex_lock(&data->update_lock);
+
+ /* Cache the values for 1 second */
+ if (data->valid && !time_after(jiffies, data->last_updated + HZ))
+ goto abort;
+
+ for (i = 0; i < SCH5636_NO_INS; i++) {
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_IN_VAL[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->in[i] = val;
+ }
+
+ for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+ if (data->temp_ctrl[i] & SCH5636_TEMP_DEACTIVATED)
+ continue;
+
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_TEMP_VAL[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp_val[i] = val;
+
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_TEMP_CTRL(i));
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp_ctrl[i] = val;
+ /* Alarms need to be explicitly write-cleared */
+ if (val & SCH5636_TEMP_ALARM) {
+ sch56xx_write_virtual_reg(data->addr,
+ SCH5636_REG_TEMP_CTRL(i), val);
+ }
+ }
+
+ for (i = 0; i < SCH5636_NO_FANS; i++) {
+ if (data->fan_ctrl[i] & SCH5636_FAN_DEACTIVATED)
+ continue;
+
+ val = sch56xx_read_virtual_reg16(data->addr,
+ SCH5636_REG_FAN_VAL[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->fan_val[i] = val;
+
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_FAN_CTRL(i));
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->fan_ctrl[i] = val;
+ /* Alarms need to be explicitly write-cleared */
+ if (val & SCH5636_FAN_ALARM) {
+ sch56xx_write_virtual_reg(data->addr,
+ SCH5636_REG_FAN_CTRL(i), val);
+ }
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static int reg_to_rpm(u16 reg)
+{
+ if (reg == 0)
+ return -EIO;
+ if (reg == 0xffff)
+ return 0;
+
+ return 5400540 / reg;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME);
+}
+
+static ssize_t show_in_value(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = DIV_ROUND_CLOSEST(
+ data->in[attr->index] * SCH5636_REG_IN_FACTORS[attr->index],
+ 255);
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_in_label(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ SCH5636_IN_LABELS[attr->index]);
+}
+
+static ssize_t show_temp_value(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = (data->temp_val[attr->index] - 64) * 1000;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_WORKING) ? 0 : 1;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_ALARM) ? 1 : 0;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_value(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = reg_to_rpm(data->fan_val[attr->index]);
+ if (val < 0)
+ return val;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = (data->fan_ctrl[attr->index] & SCH5636_FAN_NOT_PRESENT) ? 1 : 0;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5636_data *data = sch5636_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = (data->fan_ctrl[attr->index] & SCH5636_FAN_ALARM) ? 1 : 0;
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static struct sensor_device_attribute sch5636_attr[] = {
+ SENSOR_ATTR(name, 0444, show_name, NULL, 0),
+ SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
+ SENSOR_ATTR(in0_label, 0444, show_in_label, NULL, 0),
+ SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
+ SENSOR_ATTR(in1_label, 0444, show_in_label, NULL, 1),
+ SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
+ SENSOR_ATTR(in2_label, 0444, show_in_label, NULL, 2),
+ SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
+ SENSOR_ATTR(in3_label, 0444, show_in_label, NULL, 3),
+ SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
+ SENSOR_ATTR(in4_label, 0444, show_in_label, NULL, 4),
+};
+
+static struct sensor_device_attribute sch5636_temp_attr[] = {
+ SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+ SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
+ SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
+ SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+ SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
+ SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
+ SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
+ SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
+ SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
+ SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
+ SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
+ SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
+ SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
+ SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
+ SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
+ SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
+ SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
+ SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
+ SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
+ SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
+ SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
+ SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
+ SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
+ SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
+ SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
+ SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
+ SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
+ SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
+ SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
+ SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
+ SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
+ SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
+ SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
+ SENSOR_ATTR(temp12_input, 0444, show_temp_value, NULL, 11),
+ SENSOR_ATTR(temp12_fault, 0444, show_temp_fault, NULL, 11),
+ SENSOR_ATTR(temp12_alarm, 0444, show_temp_alarm, NULL, 11),
+ SENSOR_ATTR(temp13_input, 0444, show_temp_value, NULL, 12),
+ SENSOR_ATTR(temp13_fault, 0444, show_temp_fault, NULL, 12),
+ SENSOR_ATTR(temp13_alarm, 0444, show_temp_alarm, NULL, 12),
+ SENSOR_ATTR(temp14_input, 0444, show_temp_value, NULL, 13),
+ SENSOR_ATTR(temp14_fault, 0444, show_temp_fault, NULL, 13),
+ SENSOR_ATTR(temp14_alarm, 0444, show_temp_alarm, NULL, 13),
+ SENSOR_ATTR(temp15_input, 0444, show_temp_value, NULL, 14),
+ SENSOR_ATTR(temp15_fault, 0444, show_temp_fault, NULL, 14),
+ SENSOR_ATTR(temp15_alarm, 0444, show_temp_alarm, NULL, 14),
+ SENSOR_ATTR(temp16_input, 0444, show_temp_value, NULL, 15),
+ SENSOR_ATTR(temp16_fault, 0444, show_temp_fault, NULL, 15),
+ SENSOR_ATTR(temp16_alarm, 0444, show_temp_alarm, NULL, 15),
+};
+
+static struct sensor_device_attribute sch5636_fan_attr[] = {
+ SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
+ SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
+ SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
+ SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
+ SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
+ SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
+ SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
+ SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
+ SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
+ SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
+ SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
+ SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
+ SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
+ SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
+ SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
+ SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
+ SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
+ SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
+ SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
+ SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
+ SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
+ SENSOR_ATTR(fan8_input, 0444, show_fan_value, NULL, 7),
+ SENSOR_ATTR(fan8_fault, 0444, show_fan_fault, NULL, 7),
+ SENSOR_ATTR(fan8_alarm, 0444, show_fan_alarm, NULL, 7),
+};
+
+static int sch5636_remove(struct platform_device *pdev)
+{
+ struct sch5636_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++)
+ device_remove_file(&pdev->dev, &sch5636_attr[i].dev_attr);
+
+ for (i = 0; i < SCH5636_NO_TEMPS * 3; i++)
+ device_remove_file(&pdev->dev,
+ &sch5636_temp_attr[i].dev_attr);
+
+ for (i = 0; i < SCH5636_NO_FANS * 3; i++)
+ device_remove_file(&pdev->dev,
+ &sch5636_fan_attr[i].dev_attr);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+static int __devinit sch5636_probe(struct platform_device *pdev)
+{
+ struct sch5636_data *data;
+ int i, err, val, revision[2];
+ char id[4];
+
+ data = kzalloc(sizeof(struct sch5636_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+ mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
+
+ for (i = 0; i < 3; i++) {
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_FUJITSU_ID + i);
+ if (val < 0) {
+ pr_err("Could not read Fujitsu id byte at %#x\n",
+ SCH5636_REG_FUJITSU_ID + i);
+ err = val;
+ goto error;
+ }
+ id[i] = val;
+ }
+ id[i] = '\0';
+
+ if (strcmp(id, "THS")) {
+ pr_err("Unknown Fujitsu id: %02x%02x%02x\n",
+ id[0], id[1], id[2]);
+ err = -ENODEV;
+ goto error;
+ }
+
+ for (i = 0; i < 2; i++) {
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_FUJITSU_REV + i);
+ if (val < 0) {
+ err = val;
+ goto error;
+ }
+ revision[i] = val;
+ }
+ pr_info("Found %s chip at %#hx, revison: %d.%02d\n", DEVNAME,
+ data->addr, revision[0], revision[1]);
+
+ /* Read all temp + fan ctrl registers to determine which are active */
+ for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_TEMP_CTRL(i));
+ if (unlikely(val < 0)) {
+ err = val;
+ goto error;
+ }
+ data->temp_ctrl[i] = val;
+ }
+
+ for (i = 0; i < SCH5636_NO_FANS; i++) {
+ val = sch56xx_read_virtual_reg(data->addr,
+ SCH5636_REG_FAN_CTRL(i));
+ if (unlikely(val < 0)) {
+ err = val;
+ goto error;
+ }
+ data->fan_ctrl[i] = val;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++) {
+ err = device_create_file(&pdev->dev,
+ &sch5636_attr[i].dev_attr);
+ if (err)
+ goto error;
+ }
+
+ for (i = 0; i < (SCH5636_NO_TEMPS * 3); i++) {
+ if (data->temp_ctrl[i/3] & SCH5636_TEMP_DEACTIVATED)
+ continue;
+
+ err = device_create_file(&pdev->dev,
+ &sch5636_temp_attr[i].dev_attr);
+ if (err)
+ goto error;
+ }
+
+ for (i = 0; i < (SCH5636_NO_FANS * 3); i++) {
+ if (data->fan_ctrl[i/3] & SCH5636_FAN_DEACTIVATED)
+ continue;
+
+ err = device_create_file(&pdev->dev,
+ &sch5636_fan_attr[i].dev_attr);
+ if (err)
+ goto error;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ goto error;
+ }
+
+ return 0;
+
+error:
+ sch5636_remove(pdev);
+ return err;
+}
+
+static struct platform_driver sch5636_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = sch5636_probe,
+ .remove = sch5636_remove,
+};
+
+static int __init sch5636_init(void)
+{
+ return platform_driver_register(&sch5636_driver);
+}
+
+static void __exit sch5636_exit(void)
+{
+ platform_driver_unregister(&sch5636_driver);
+}
+
+MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(sch5636_init);
+module_exit(sch5636_exit);
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
new file mode 100644
index 0000000..fac32ee
--- /dev/null
+++ b/drivers/hwmon/sch56xx-common.c
@@ -0,0 +1,340 @@
+/***************************************************************************
+ * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include "sch56xx-common.h"
+
+#define SIO_SCH56XX_LD_EM 0x0C /* Embedded uController Logical Dev */
+#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */
+
+#define SIO_SCH5627_ID 0xC6 /* Chipset ID */
+#define SIO_SCH5636_ID 0xC7 /* Chipset ID */
+
+#define REGION_LENGTH 9
+
+#define SCH56XX_CMD_READ 0x02
+#define SCH56XX_CMD_WRITE 0x03
+
+static struct platform_device *sch56xx_pdev;
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, "sch56xx")) {
+ pr_err("I/O address 0x%04x already in use\n", base);
+ return -EBUSY;
+ }
+
+ outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
+}
+
+static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v)
+{
+ u8 val;
+ int i;
+ /*
+ * According to SMSC for the commands we use the maximum time for
+ * the EM to respond is 15 ms, but testing shows in practice it
+ * responds within 15-32 reads, so we first busy poll, and if
+ * that fails sleep a bit and try again until we are way past
+ * the 15 ms maximum response time.
+ */
+ const int max_busy_polls = 64;
+ const int max_lazy_polls = 32;
+
+ /* (Optional) Write-Clear the EC to Host Mailbox Register */
+ val = inb(addr + 1);
+ outb(val, addr + 1);
+
+ /* Set Mailbox Address Pointer to first location in Region 1 */
+ outb(0x00, addr + 2);
+ outb(0x80, addr + 3);
+
+ /* Write Request Packet Header */
+ outb(cmd, addr + 4); /* VREG Access Type read:0x02 write:0x03 */
+ outb(0x01, addr + 5); /* # of Entries: 1 Byte (8-bit) */
+ outb(0x04, addr + 2); /* Mailbox AP to first data entry loc. */
+
+ /* Write Value field */
+ if (cmd == SCH56XX_CMD_WRITE)
+ outb(v, addr + 4);
+
+ /* Write Address field */
+ outb(reg & 0xff, addr + 6);
+ outb(reg >> 8, addr + 7);
+
+ /* Execute the Random Access Command */
+ outb(0x01, addr); /* Write 01h to the Host-to-EC register */
+
+ /* EM Interface Polling "Algorithm" */
+ for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
+ if (i >= max_busy_polls)
+ msleep(1);
+ /* Read Interrupt source Register */
+ val = inb(addr + 8);
+ /* Write Clear the interrupt source bits */
+ if (val)
+ outb(val, addr + 8);
+ /* Command Completed ? */
+ if (val & 0x01)
+ break;
+ }
+ if (i == max_busy_polls + max_lazy_polls) {
+ pr_err("Max retries exceeded reading virtual "
+ "register 0x%04hx (%d)\n", reg, 1);
+ return -EIO;
+ }
+
+ /*
+ * According to SMSC we may need to retry this, but sofar I've always
+ * seen this succeed in 1 try.
+ */
+ for (i = 0; i < max_busy_polls; i++) {
+ /* Read EC-to-Host Register */
+ val = inb(addr + 1);
+ /* Command Completed ? */
+ if (val == 0x01)
+ break;
+
+ if (i == 0)
+ pr_warn("EC reports: 0x%02x reading virtual register "
+ "0x%04hx\n", (unsigned int)val, reg);
+ }
+ if (i == max_busy_polls) {
+ pr_err("Max retries exceeded reading virtual "
+ "register 0x%04hx (%d)\n", reg, 2);
+ return -EIO;
+ }
+
+ /*
+ * According to the SMSC app note we should now do:
+ *
+ * Set Mailbox Address Pointer to first location in Region 1 *
+ * outb(0x00, addr + 2);
+ * outb(0x80, addr + 3);
+ *
+ * But if we do that things don't work, so let's not.
+ */
+
+ /* Read Value field */
+ if (cmd == SCH56XX_CMD_READ)
+ return inb(addr + 4);
+
+ return 0;
+}
+
+int sch56xx_read_virtual_reg(u16 addr, u16 reg)
+{
+ return sch56xx_send_cmd(addr, SCH56XX_CMD_READ, reg, 0);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg);
+
+int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val)
+{
+ return sch56xx_send_cmd(addr, SCH56XX_CMD_WRITE, reg, val);
+}
+EXPORT_SYMBOL(sch56xx_write_virtual_reg);
+
+int sch56xx_read_virtual_reg16(u16 addr, u16 reg)
+{
+ int lsb, msb;
+
+ /* Read LSB first, this will cause the matching MSB to be latched */
+ lsb = sch56xx_read_virtual_reg(addr, reg);
+ if (lsb < 0)
+ return lsb;
+
+ msb = sch56xx_read_virtual_reg(addr, reg + 1);
+ if (msb < 0)
+ return msb;
+
+ return lsb | (msb << 8);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg16);
+
+int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg,
+ int high_nibble)
+{
+ int msb, lsn;
+
+ /* Read MSB first, this will cause the matching LSN to be latched */
+ msb = sch56xx_read_virtual_reg(addr, msb_reg);
+ if (msb < 0)
+ return msb;
+
+ lsn = sch56xx_read_virtual_reg(addr, lsn_reg);
+ if (lsn < 0)
+ return lsn;
+
+ if (high_nibble)
+ return (msb << 4) | (lsn >> 4);
+ else
+ return (msb << 4) | (lsn & 0x0f);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg12);
+
+static int __init sch56xx_find(int sioaddr, unsigned short *address,
+ const char **name)
+{
+ u8 devid;
+ int err;
+
+ err = superio_enter(sioaddr);
+ if (err)
+ return err;
+
+ devid = superio_inb(sioaddr, SIO_REG_DEVID);
+ switch (devid) {
+ case SIO_SCH5627_ID:
+ *name = "sch5627";
+ break;
+ case SIO_SCH5636_ID:
+ *name = "sch5636";
+ break;
+ default:
+ pr_debug("Unsupported device id: 0x%02x\n",
+ (unsigned int)devid);
+ err = -ENODEV;
+ goto exit;
+ }
+
+ superio_select(sioaddr, SIO_SCH56XX_LD_EM);
+
+ if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ pr_warn("Device not activated\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /*
+ * Warning the order of the low / high byte is the other way around
+ * as on most other superio devices!!
+ */
+ *address = superio_inb(sioaddr, SIO_REG_ADDR) |
+ superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
+ if (*address == 0) {
+ pr_warn("Base address not set\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init sch56xx_device_add(unsigned short address, const char *name)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + REGION_LENGTH - 1,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ sch56xx_pdev = platform_device_alloc(name, address);
+ if (!sch56xx_pdev)
+ return -ENOMEM;
+
+ res.name = sch56xx_pdev->name;
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit_device_put;
+
+ err = platform_device_add_resources(sch56xx_pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(sch56xx_pdev);
+ if (err) {
+ pr_err("Device addition failed\n");
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(sch56xx_pdev);
+
+ return err;
+}
+
+static int __init sch56xx_init(void)
+{
+ int err;
+ unsigned short address;
+ const char *name;
+
+ err = sch56xx_find(0x4e, &address, &name);
+ if (err)
+ err = sch56xx_find(0x2e, &address, &name);
+ if (err)
+ return err;
+
+ return sch56xx_device_add(address, name);
+}
+
+static void __exit sch56xx_exit(void)
+{
+ platform_device_unregister(sch56xx_pdev);
+}
+
+MODULE_DESCRIPTION("SMSC SCH56xx Hardware Monitoring Common Code");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(sch56xx_init);
+module_exit(sch56xx_exit);
diff --git a/drivers/hwmon/sch56xx-common.h b/drivers/hwmon/sch56xx-common.h
new file mode 100644
index 0000000..d5eaf3b9
--- /dev/null
+++ b/drivers/hwmon/sch56xx-common.h
@@ -0,0 +1,24 @@
+/***************************************************************************
+ * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+int sch56xx_read_virtual_reg(u16 addr, u16 reg);
+int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val);
+int sch56xx_read_virtual_reg16(u16 addr, u16 reg);
+int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg,
+ int high_nibble);
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index cf4330b..7d231cf 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -671,7 +671,7 @@ static ssize_t sht15_show_status(struct device *dev,
* @buf: sysfs buffer to read the new heater state from.
* @count: length of the data.
*
- * Will be called on read access to heater_enable sysfs attribute.
+ * Will be called on write access to heater_enable sysfs attribute.
* Returns number of bytes actually decoded, negative errno on error.
*/
static ssize_t sht15_store_heater(struct device *dev,
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index 0d18de4..8eac67d 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
#include <linux/sysfs.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
@@ -48,8 +49,10 @@ enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME };
struct via_cputemp_data {
struct device *hwmon_dev;
const char *name;
+ u8 vrm;
u32 id;
- u32 msr;
+ u32 msr_temp;
+ u32 msr_vid;
};
/*
@@ -77,13 +80,27 @@ static ssize_t show_temp(struct device *dev,
u32 eax, edx;
int err;
- err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+ err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx);
if (err)
return -EAGAIN;
return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000);
}
+static ssize_t show_cpu_vid(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct via_cputemp_data *data = dev_get_drvdata(dev);
+ u32 eax, edx;
+ int err;
+
+ err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx);
+ if (err)
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm));
+}
+
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
SHOW_TEMP);
static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
@@ -100,6 +117,9 @@ static const struct attribute_group via_cputemp_group = {
.attrs = via_cputemp_attributes,
};
+/* Optional attributes */
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_cpu_vid, NULL);
+
static int __devinit via_cputemp_probe(struct platform_device *pdev)
{
struct via_cputemp_data *data;
@@ -122,11 +142,12 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
/* C7 A */
case 0xD:
/* C7 D */
- data->msr = 0x1169;
+ data->msr_temp = 0x1169;
+ data->msr_vid = 0x198;
break;
case 0xF:
/* Nano */
- data->msr = 0x1423;
+ data->msr_temp = 0x1423;
break;
default:
err = -ENODEV;
@@ -134,7 +155,7 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
}
/* test if we can access the TEMPERATURE MSR */
- err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+ err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx);
if (err) {
dev_err(&pdev->dev,
"Unable to access TEMPERATURE MSR, giving up\n");
@@ -147,6 +168,15 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
if (err)
goto exit_free;
+ if (data->msr_vid)
+ data->vrm = vid_which_vrm();
+
+ if (data->vrm) {
+ err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid);
+ if (err)
+ goto exit_remove;
+ }
+
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
@@ -158,6 +188,8 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
return 0;
exit_remove:
+ if (data->vrm)
+ device_remove_file(&pdev->dev, &dev_attr_cpu0_vid);
sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
exit_free:
platform_set_drvdata(pdev, NULL);
@@ -171,6 +203,8 @@ static int __devexit via_cputemp_remove(struct platform_device *pdev)
struct via_cputemp_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->hwmon_dev);
+ if (data->vrm)
+ device_remove_file(&pdev->dev, &dev_attr_cpu0_vid);
sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
platform_set_drvdata(pdev, NULL);
kfree(data);
OpenPOWER on IntegriCloud