diff options
| author | Helmut Grohne <h.grohne@intenta.de> | 2016-06-03 14:15:32 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2016-06-08 10:36:29 +0200 |
| commit | 0f84f29ff30bdb1bca23017b118b4ea3999cac32 (patch) | |
| tree | 6186d77109d9dbd5ac7b42d88f0a818c3553fef3 | |
| parent | d15d6cf91695674fbabac3b1d2c8a269d9bab5c6 (diff) | |
| download | op-kernel-dev-0f84f29ff30bdb1bca23017b118b4ea3999cac32.zip op-kernel-dev-0f84f29ff30bdb1bca23017b118b4ea3999cac32.tar.gz | |
gpio: zynq: initialize clock even without CONFIG_PM
When the PM initialization was moved in the commit referenced below, the
code enabling the clock was removed from the probe function. On
CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables
the clock, but when power management is disabled, all those pm_*
functions are noops and the clock is never enabled resulting in a
dysfunctional gpio controller.
Put the clock initialization back to support CONFIG_PM=n.
Cc: stable@vger.kernel.org
Signed-off-by: Helmut Grohne <h.grohne@intenta.de>
Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| -rw-r--r-- | drivers/gpio/gpio-zynq.c | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index 75c6355..e72794e 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev) dev_err(&pdev->dev, "input clock not found.\n"); return PTR_ERR(gpio->clk); } + ret = clk_prepare_enable(gpio->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -747,6 +753,7 @@ err_pm_put: pm_runtime_put(&pdev->dev); err_pm_dis: pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(gpio->clk); return ret; } |
