Staging: rt2870: prepare for rt{28,30}70/common/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 files changed, 2926 insertions, 31 deletions

diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index b8c5896..9ed818d 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -639,7 +639,7 @@ VOID	RTMPFreeTxRxRingMemory(
 
 
 	// Free Tx frame resource
-	for (acidx = 0; acidx < 4; acidx++)
+		for(acidx=0; acidx<4; acidx++)
 		{
 		PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
 			if (pHTTXContext)
@@ -699,9 +699,14 @@ NDIS_STATUS AdapterBlockAllocateMemory(
 
 	usb_dev = pObj->pUsb_Dev;
 
+#ifndef RT30xx
 	pObj->MLMEThr_task		= NULL;
 	pObj->RTUSBCmdThr_task	= NULL;
-
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid	= NULL;
+	pObj->RTUSBCmdThr_pid	= NULL;
+#endif
 	*ppAd = (PVOID)vmalloc(sizeof(RTMP_ADAPTER));
 
 	if (*ppAd)
@@ -737,7 +742,12 @@ NDIS_STATUS	 CreateThreads(
 {
 	PRTMP_ADAPTER pAd = net_dev->ml_priv;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
+#ifndef RT30xx
 	struct task_struct *tsk;
+#endif
+#ifdef RT30xx
+	pid_t pid_number;
+#endif
 
 	//init_MUTEX(&(pAd->usbdev_semaphore));
 
@@ -751,39 +761,76 @@ NDIS_STATUS	 CreateThreads(
 	init_completion (&pAd->TimerQComplete);
 
 	// Creat MLME Thread
+#ifndef RT30xx
 	pObj->MLMEThr_task = NULL;
 	tsk = kthread_run(MlmeThread, pAd, pAd->net_dev->name);
 
 	if (IS_ERR(tsk)) {
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid = NULL;
+	pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+	{
+#endif
 		printk (KERN_WARNING "%s: unable to start Mlme thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
 
+#ifndef RT30xx
 	pObj->MLMEThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid = find_get_pid(pid_number);
+#endif
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->mlmeComplete));
 
 	// Creat Command Thread
+#ifndef RT30xx
 	pObj->RTUSBCmdThr_task = NULL;
 	tsk = kthread_run(RTUSBCmdThread, pAd, pAd->net_dev->name);
 
 	if (IS_ERR(tsk) < 0)
+#endif
+#ifdef RT30xx
+	pObj->RTUSBCmdThr_pid = NULL;
+	pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+#endif
 	{
 		printk (KERN_WARNING "%s: unable to start RTUSBCmd thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
 
+#ifndef RT30xx
 	pObj->RTUSBCmdThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
+#endif
 	wait_for_completion(&(pAd->CmdQComplete));
 
+#ifndef RT30xx
 	pObj->TimerQThr_task = NULL;
 	tsk = kthread_run(TimerQThread, pAd, pAd->net_dev->name);
 	if (IS_ERR(tsk) < 0)
+#endif
+#ifdef RT30xx
+	pObj->TimerQThr_pid = NULL;
+	pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+#endif
 	{
 		printk (KERN_WARNING "%s: unable to start TimerQThread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
+#ifndef RT30xx
 	pObj->TimerQThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->TimerQThr_pid = find_get_pid(pid_number);
+#endif
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->TimerQComplete));
 
@@ -1260,9 +1307,9 @@ static void rt2870_hcca_dma_done_tasklet(unsigned long data)
 	UCHAR				BulkOutPipeId = 4;
 	purbb_t				pUrb;
 
-
+#ifndef RT30xx
 	DBGPRINT_RAW(RT_DEBUG_ERROR, ("--->hcca_dma_done_tasklet\n"));
-
+#endif
 
 	pUrb			= (purbb_t)data;
 	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
@@ -1292,13 +1339,19 @@ static void rt2870_hcca_dma_done_tasklet(unsigned long data)
 				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
 			}
 
+#ifndef RT30xx
 			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL);
+#endif
+#ifdef RT30xx
+			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<4);
+#endif
 			RTUSBKickBulkOut(pAd);
 		}
 	}
 
+#ifndef RT30xx
 	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<---hcca_dma_done_tasklet\n"));
-
+#endif
 		return;
 }
 
diff --git a/drivers/staging/rt2870/common/action.c b/drivers/staging/rt2870/common/action.c
index a32d361..c2b4dc7 100644
--- a/drivers/staging/rt2870/common/action.c
+++ b/drivers/staging/rt2870/common/action.c
@@ -533,7 +533,12 @@ VOID SendRefreshBAR(
 
 			if (1)	// Now we always send BAR.
 			{
+#ifndef RT30xx
 				MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
+#endif
+#ifdef RT30xx
+				MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
+#endif
 			}
 			MlmeFreeMemory(pAd, pOutBuffer);
 		}
diff --git a/drivers/staging/rt2870/common/ba_action.c b/drivers/staging/rt2870/common/ba_action.c
index 142c669..b4124a9 100644
--- a/drivers/staging/rt2870/common/ba_action.c
+++ b/drivers/staging/rt2870/common/ba_action.c
@@ -532,6 +532,13 @@ VOID BAOriSessionSetUp(
 	pBAEntry->TimeOutValue = TimeOut;
 	pBAEntry->pAdapter = pAd;
 
+#ifdef RT30xx
+	DBGPRINT(RT_DEBUG_TRACE,("Send AddBA to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d isForced:%d Wcid:%d\n"
+		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+		,TID,isForced,pEntry->Aid));
+#endif
+
 	if (!(pEntry->TXBAbitmap & (1<<TID)))
 	{
 		RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE);
@@ -1072,8 +1079,16 @@ VOID BAOriSessionSetupTimeout(
 		AddbaReq.Token = pBAEntry->Token;
 		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
 		RT28XX_MLME_HANDLER(pAd);
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));
-
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d Wcid:%d\n"
+		,pBAEntry->Token
+		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+		,pBAEntry->TID,pEntry->Aid));
+#endif
 		pBAEntry->Token++;
 		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
 	}
@@ -1377,6 +1392,10 @@ VOID SendPSMPAction(
 	//ULONG           Idx;
 	FRAME_PSMP_ACTION   Frame;
 	ULONG           FrameLen;
+#ifdef RT30xx
+	UCHAR			bbpdata=0;
+	UINT32			macdata;
+#endif // RT30xx //
 
 	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
 	if (NStatus != NDIS_STATUS_SUCCESS)
@@ -1392,12 +1411,54 @@ VOID SendPSMPAction(
 	switch (Psmp)
 	{
 		case MMPS_ENABLE:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// disable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata &= ~(0x04);	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// disable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata &= ~(0x09);	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 0;
 			break;
 		case MMPS_DYNAMIC:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// enable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata |= 0x04;	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// enable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata |= 0x09;	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 3;
 			break;
 		case MMPS_STATIC:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// enable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata |= 0x04;	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// enable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata |= 0x09;	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 1;
 			break;
 	}
diff --git a/drivers/staging/rt2870/common/cmm_data.c b/drivers/staging/rt2870/common/cmm_data.c
index 0ca1ab6..0513321 100644
--- a/drivers/staging/rt2870/common/cmm_data.c
+++ b/drivers/staging/rt2870/common/cmm_data.c
@@ -172,7 +172,114 @@ NDIS_STATUS MiniportMMRequest(
 	return Status;
 }
 
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR	QueIdx,
+	IN	PNDIS_PACKET	pPacket);
+
+#define MAX_DATAMM_RETRY	3
+/*
+	========================================================================
+
+	Routine Description:
+		API for MLME to transmit management frame to AP (BSS Mode)
+	or station (IBSS Mode)
+
+	Arguments:
+		pAd Pointer to our adapter
+		pData		Pointer to the outgoing 802.11 frame
+		Length		Size of outgoing management frame
 
+	Return Value:
+		NDIS_STATUS_FAILURE
+		NDIS_STATUS_PENDING
+		NDIS_STATUS_SUCCESS
+
+	IRQL = PASSIVE_LEVEL
+	IRQL = DISPATCH_LEVEL
+
+	Note:
+
+	========================================================================
+*/
+NDIS_STATUS MiniportDataMMRequest(
+							 IN  PRTMP_ADAPTER   pAd,
+							 IN  UCHAR           QueIdx,
+							 IN  PUCHAR          pData,
+							 IN  UINT            Length)
+{
+	PNDIS_PACKET    pPacket;
+	NDIS_STATUS  Status = NDIS_STATUS_SUCCESS;
+	ULONG    FreeNum;
+	int 	retry = 0;
+	UCHAR           IrqState;
+	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
+
+	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
+
+	// 2860C use Tx Ring
+	IrqState = pAd->irq_disabled;
+
+	do
+	{
+		// Reset is in progress, stop immediately
+		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
+			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
+			!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
+		{
+			Status = NDIS_STATUS_FAILURE;
+			break;
+		}
+
+		// Check Free priority queue
+		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
+
+		// 2860C use Tx Ring
+
+		// free Tx(QueIdx) resources
+		FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
+
+		if ((FreeNum > 0))
+		{
+			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
+			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
+			if (Status != NDIS_STATUS_SUCCESS)
+			{
+				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
+				break;
+			}
+
+			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
+			//pAd->CommonCfg.MlmeRate = RATE_2;
+
+
+			Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket);
+			if (Status != NDIS_STATUS_SUCCESS)
+				RTMPFreeNdisPacket(pAd, pPacket);
+			retry = MAX_DATAMM_RETRY;
+		}
+		else
+		{
+			retry ++;
+
+			printk("retry %d\n", retry);
+			pAd->RalinkCounters.MgmtRingFullCount++;
+
+			if (retry >= MAX_DATAMM_RETRY)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n",
+											QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
+			}
+		}
+
+	} while (retry < MAX_DATAMM_RETRY);
+
+
+	return Status;
+}
+#endif /* RT30xx */
 
 
 /*
@@ -214,7 +321,23 @@ NDIS_STATUS MlmeHardTransmit(
 
 }
 
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR	QueIdx,
+	IN	PNDIS_PACKET	pPacket)
+{
+	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
+		)
+	{
+		return NDIS_STATUS_FAILURE;
+	}
 
+#ifdef RT2870
+	return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
+#endif // RT2870 //
+}
+#endif /* RT30xx */
 
 NDIS_STATUS MlmeHardTransmitMgmtRing(
 	IN	PRTMP_ADAPTER	pAd,
@@ -614,6 +737,11 @@ BOOLEAN RTMP_FillTxBlkInfo(
 	}
 
 	return TRUE;
+
+#ifdef RT30xx
+FillTxBlkErr:
+	return FALSE;
+#endif
 }
 
 
@@ -701,6 +829,7 @@ VOID RTMPDeQueuePacket(
 	if (QIdx == NUM_OF_TX_RING)
 	{
 		sQIdx = 0;
+//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		eQIdx = 3;	// 4 ACs, start from 0.
 	}
 	else
@@ -1413,7 +1542,15 @@ VOID RTMPResumeMsduTransmission(
 {
 	DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));
 
-
+#ifdef RT30xx
+	// After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
+	// R66 should not be 0
+	if (pAd->BbpTuning.R66CurrentValue == 0)
+	{
+		pAd->BbpTuning.R66CurrentValue = 0x38;
+		DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
+	}
+#endif
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);
 
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
@@ -1774,7 +1911,12 @@ BOOLEAN MacTableDeleteEntry(
 	if (pAd->MacTab.Size == 0)
 	{
 		pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
+#ifndef RT30xx
 		AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
+#endif
+#ifdef RT30xx
+		RT28XX_UPDATE_PROTECT(pAd);  // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+#endif
 	}
 
 	return TRUE;
diff --git a/drivers/staging/rt2870/common/cmm_data_2870.c b/drivers/staging/rt2870/common/cmm_data_2870.c
index 182f273..d6fc056 100644
--- a/drivers/staging/rt2870/common/cmm_data_2870.c
+++ b/drivers/staging/rt2870/common/cmm_data_2870.c
@@ -292,6 +292,7 @@ USHORT RtmpUSB_WriteSingleTxResource(
 		pTxBlk->Priv = (TXINFO_SIZE + USBDMApktLen);
 
 		// For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(USBDMApktLen), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
 
 		if ((pHTTXContext->CurWritePosition + 3906 + pTxBlk->Priv) > MAX_TXBULK_LIMIT)
@@ -809,7 +810,12 @@ VOID RT28xxUsbStaAsicForceWakeup(
 	AutoWakeupCfg.word = 0;
 	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
 
+#ifndef RT30xx
 	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
+#endif
+#ifdef RT30xx
+	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
+#endif
 
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
 }
@@ -846,7 +852,12 @@ VOID RT28xxUsbMlmeRadioOn(
 	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
 		return;
 
+#ifndef RT30xx
     	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
+#endif
+#ifdef RT30xx
+    	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
+#endif
 		RTMPusecDelay(10000);
 
 	NICResetFromError(pAd);
@@ -854,6 +865,13 @@ VOID RT28xxUsbMlmeRadioOn(
 	// Enable Tx/Rx
 	RTMPEnableRxTx(pAd);
 
+#ifdef RT3070
+	if (IS_RT3071(pAd))
+	{
+		RT30xxReverseRFSleepModeSetup(pAd);
+	}
+#endif // RT3070 //
+
 	// Clear Radio off flag
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
@@ -890,6 +908,7 @@ VOID RT28xxUsbMlmeRadioOFF(
 		BssTableInit(&pAd->ScanTab);
 	}
 
+#ifndef RT30xx
 	// Disable MAC Tx/Rx
 	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
 	Value &= (0xfffffff3);
@@ -903,6 +922,7 @@ VOID RT28xxUsbMlmeRadioOFF(
 
 	// TX_PIN_CFG => value = 0x0 => 20mA
 	RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
+#endif
 
 	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
 	{
@@ -915,6 +935,14 @@ VOID RT28xxUsbMlmeRadioOFF(
 		AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
 	}
 
+#ifdef RT30xx
+	// Disable Tx/Rx DMA
+	RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word);	   // disable DMA
+	GloCfg.field.EnableTxDMA = 0;
+	GloCfg.field.EnableRxDMA = 0;
+	RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word);	   // abort all TX rings
+#endif
+
 	// Waiting for DMA idle
 	i = 0;
 	do
@@ -926,6 +954,13 @@ VOID RT28xxUsbMlmeRadioOFF(
 		RTMPusecDelay(1000);
 	}while (i++ < 100);
 
+#ifdef RT30xx
+	// Disable MAC Tx/Rx
+	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
+	Value &= (0xfffffff3);
+	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
+#endif
+
 	AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
 }
 
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c
index 2917d5f..032e070 100644
--- a/drivers/staging/rt2870/common/cmm_info.c
+++ b/drivers/staging/rt2870/common/cmm_info.c
@@ -1388,6 +1388,7 @@ VOID	RTMPSetHT(
 		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
 	}
 
+#ifndef RT30xx
 #ifdef RT2870
 	/* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
 	if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
@@ -1396,6 +1397,7 @@ VOID	RTMPSetHT(
 		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
 	}
 #endif // RT2870 //
+#endif
 
 	if(pHTPhyMode->SHORTGI == GI_400)
 	{
@@ -2454,13 +2456,26 @@ INT	Set_HtAutoBa_Proc(
 
 	Value = simple_strtol(arg, 0, 10);
 	if (Value == 0)
+	{
 		pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-    else if (Value == 1)
+#ifdef RT30xx
+		pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+#endif
+	}
+        else if (Value == 1)
+	{
 		pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+#ifdef RT30xx
+		pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+#endif
+	}
 	else
 		return FALSE; //Invalid argument
 
     pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+#ifdef RT30xx
+    pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+#endif
 	SetCommonHT(pAd);
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
@@ -2677,6 +2692,9 @@ PCHAR   RTMPGetRalinkAuthModeStr(
 	{
 		case Ndis802_11AuthModeOpen:
 			return "OPEN";
+#ifdef RT30xx
+        default:
+#endif
 		case Ndis802_11AuthModeWPAPSK:
 			return "WPAPSK";
 		case Ndis802_11AuthModeShared:
@@ -2691,10 +2709,12 @@ PCHAR   RTMPGetRalinkAuthModeStr(
 			return "WPAPSKWPA2PSK";
         case Ndis802_11AuthModeWPA1WPA2:
 			return "WPA1WPA2";
+#ifndef RT30xx
 		case Ndis802_11AuthModeWPANone:
 			return "WPANONE";
 		default:
 			return "UNKNOW";
+#endif
 	}
 }
 
@@ -2703,6 +2723,9 @@ PCHAR   RTMPGetRalinkEncryModeStr(
 {
 	switch(encryMode)
 	{
+#ifdef RT30xx
+	    default:
+#endif
 		case Ndis802_11WEPDisabled:
 			return "NONE";
 		case Ndis802_11WEPEnabled:
@@ -2713,8 +2736,10 @@ PCHAR   RTMPGetRalinkEncryModeStr(
 			return "AES";
         case Ndis802_11Encryption4Enabled:
 			return "TKIPAES";
+#ifndef RT30xx
 		default:
 			return "UNKNOW";
+#endif
 	}
 }
 
@@ -2739,7 +2764,12 @@ INT RTMPShowCfgValue(
 	{
 		sprintf(pBuf, "\n");
 		for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
+#ifndef RT30xx
 			sprintf(pBuf + strlen(pBuf), "%s\n", PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
+#endif
+#ifdef RT30xx
+			sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
+#endif
 	}
 
 	return Status;
diff --git a/drivers/staging/rt2870/common/cmm_wpa.c b/drivers/staging/rt2870/common/cmm_wpa.c
index e206077..d467f53 100644
--- a/drivers/staging/rt2870/common/cmm_wpa.c
+++ b/drivers/staging/rt2870/common/cmm_wpa.c
@@ -39,10 +39,14 @@
 // WPA OUI
 UCHAR		OUI_WPA_NONE_AKM[4]		= {0x00, 0x50, 0xF2, 0x00};
 UCHAR       OUI_WPA_VERSION[4]      = {0x00, 0x50, 0xF2, 0x01};
+#ifndef RT30xx
 UCHAR       OUI_WPA_WEP40[4]      = {0x00, 0x50, 0xF2, 0x01};
+#endif
 UCHAR       OUI_WPA_TKIP[4]     = {0x00, 0x50, 0xF2, 0x02};
 UCHAR       OUI_WPA_CCMP[4]     = {0x00, 0x50, 0xF2, 0x04};
+#ifndef RT30xx
 UCHAR       OUI_WPA_WEP104[4]      = {0x00, 0x50, 0xF2, 0x05};
+#endif
 UCHAR       OUI_WPA_8021X_AKM[4]	= {0x00, 0x50, 0xF2, 0x01};
 UCHAR       OUI_WPA_PSK_AKM[4]      = {0x00, 0x50, 0xF2, 0x02};
 // WPA2 OUI
@@ -51,7 +55,9 @@ UCHAR       OUI_WPA2_TKIP[4]        = {0x00, 0x0F, 0xAC, 0x02};
 UCHAR       OUI_WPA2_CCMP[4]        = {0x00, 0x0F, 0xAC, 0x04};
 UCHAR       OUI_WPA2_8021X_AKM[4]   = {0x00, 0x0F, 0xAC, 0x01};
 UCHAR       OUI_WPA2_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x02};
+#ifndef RT30xx
 UCHAR       OUI_WPA2_WEP104[4]   = {0x00, 0x0F, 0xAC, 0x05};
+#endif
 // MSA OUI
 UCHAR   	OUI_MSA_8021X_AKM[4]    = {0x00, 0x0F, 0xAC, 0x05};		// Not yet final - IEEE 802.11s-D1.06
 UCHAR   	OUI_MSA_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x06};		// Not yet final - IEEE 802.11s-D1.06
@@ -370,6 +376,7 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
+#ifndef RT30xx
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -385,7 +392,7 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-
+#endif
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
 	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
@@ -446,6 +453,7 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
+#ifndef RT30xx
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -461,7 +469,7 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-
+#endif
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
 	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
diff --git a/drivers/staging/rt2870/common/eeprom.c b/drivers/staging/rt2870/common/eeprom.c
index bed2d66..e161f92 100644
--- a/drivers/staging/rt2870/common/eeprom.c
+++ b/drivers/staging/rt2870/common/eeprom.c
@@ -73,12 +73,16 @@ USHORT ShiftInBits(
         RaiseClock(pAd, &x);
 
         RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
+#ifdef RT30xx
+		LowerClock(pAd, &x); //prevent read failed
+#endif
         x &= ~(EEDI);
         if(x & EEDO)
             data |= 1;
 
+#ifndef RT30xx
         LowerClock(pAd, &x);
+#endif
     }
 
     return data;
@@ -181,6 +185,15 @@ USHORT RTMP_EEPROM_READ16(
     UINT32		x;
     USHORT		data;
 
+#ifdef RT30xx
+	if (pAd->NicConfig2.field.AntDiversity)
+    {
+    	pAd->EepromAccess = TRUE;
+    }
+//2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+{
+#endif
     Offset /= 2;
     // reset bits and set EECS
     RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
@@ -188,9 +201,17 @@ USHORT RTMP_EEPROM_READ16(
     x |= EECS;
     RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
+#ifdef RT30xx
+	// patch can not access e-Fuse issue
+    if (!IS_RT3090(pAd))
+    {
+#endif
 	// kick a pulse
 	RaiseClock(pAd, &x);
 	LowerClock(pAd, &x);
+#ifdef RT30xx
+    }
+#endif
 
     // output the read_opcode and register number in that order
     ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
@@ -201,6 +222,17 @@ USHORT RTMP_EEPROM_READ16(
 
     EEpromCleanup(pAd);
 
+#ifdef RT30xx
+	// Antenna and EEPROM access are both using EESK pin,
+    // Therefor we should avoid accessing EESK at the same time
+    // Then restore antenna after EEPROM access
+	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+    {
+	    pAd->EepromAccess = FALSE;
+	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+    }
+}
+#endif
     return data;
 }	//ReadEEprom
 
@@ -211,6 +243,15 @@ VOID RTMP_EEPROM_WRITE16(
 {
     UINT32 x;
 
+#ifdef RT30xx
+	if (pAd->NicConfig2.field.AntDiversity)
+    {
+    	pAd->EepromAccess = TRUE;
+    }
+	//2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+	{
+#endif
 	Offset /= 2;
 
 	EWEN(pAd);
@@ -221,9 +262,17 @@ VOID RTMP_EEPROM_WRITE16(
     x |= EECS;
     RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
+#ifdef RT30xx
+	// patch can not access e-Fuse issue
+    if (!IS_RT3090(pAd))
+    {
+#endif
 	// kick a pulse
 	RaiseClock(pAd, &x);
 	LowerClock(pAd, &x);
+#ifdef RT30xx
+    }
+#endif
 
     // output the read_opcode ,register number and data in that order
     ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
@@ -240,5 +289,1222 @@ VOID RTMP_EEPROM_WRITE16(
 	EWDS(pAd);
 
     EEpromCleanup(pAd);
+
+#ifdef RT30xx
+	// Antenna and EEPROM access are both using EESK pin,
+    // Therefor we should avoid accessing EESK at the same time
+    // Then restore antenna after EEPROM access
+	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+    {
+	    pAd->EepromAccess = FALSE;
+	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+    }
+}
+#endif
+}
+
+//2008/09/11:KH add to support efuse<--
+#ifdef RT30xx
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+UCHAR eFuseReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data;
+
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	//Use the eeprom logical address and covert to address to block number
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
+	eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		//rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+		{
+			break;
+		}
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//if EFSROM_AOUT is not found in physical address, write 0xffff
+	if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f)
+	{
+		for(i=0; i<Length/2; i++)
+			*(pData+2*i) = 0xffff;
+	}
+	else
+	{
+		//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
+		efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
+		//data hold 4 bytes data.
+		//In RTMP_IO_READ32 will automatically execute 32-bytes swapping
+		RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+		//Decide the upper 2 bytes or the bottom 2 bytes.
+		// Little-endian		S	|	S	Big-endian
+		// addr	3	2	1	0	|	0	1	2	3
+		// Ori-V	D	C	B	A	|	A	B	C	D
+		//After swapping
+		//		D	C	B	A	|	D	C	B	A
+		//Return 2-bytes
+		//The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
+		//For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
+		data = data >> (8*(Offset & 0x3));
+
+		NdisMoveMemory(pData, &data, Length);
+	}
+
+	return (UCHAR) eFuseCtrlStruc.field.EFSROM_AOUT;
+
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFusePhysicalReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data;
+
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+	//Read in physical view
+	eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+	//Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
+	//The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
+	//Decide which EFUSE_DATA to read
+	//590:F E D C
+	//594:B A 9 8
+	//598:7 6 5 4
+	//59C:3 2 1 0
+	efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
+
+	RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+
+	data = data >> (8*(Offset & 0x3));
+
+	NdisMoveMemory(pData, &data, Length);
+
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFuseReadPhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	IN	PUSHORT lpInBuffer,
+  	IN	ULONG nInBufferSize,
+  	OUT	PUSHORT lpOutBuffer,
+  	IN	ULONG nOutBufferSize
+)
+{
+	USHORT* pInBuf = (USHORT*)lpInBuffer;
+	USHORT* pOutBuf = (USHORT*)lpOutBuffer;
+
+	USHORT Offset = pInBuf[0];					//addr
+	USHORT Length = pInBuf[1];					//length
+	int 		i;
+
+	for(i=0; i<Length; i+=2)
+	{
+		eFusePhysicalReadRegisters(pAd,Offset+i, 2, &pOutBuf[i/2]);
+	}
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseRead(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUCHAR			pData,
+	IN	USHORT			Length)
+{
+	USHORT* pOutBuf = (USHORT*)pData;
+	NTSTATUS	Status = STATUS_SUCCESS;
+	UCHAR	EFSROM_AOUT;
+	int	i;
+
+	for(i=0; i<Length; i+=2)
+	{
+		EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]);
+	}
+	return Status;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFusePhysicalWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data, eFuseDataBuffer[4];
+
+	//Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW.
+
+	/////////////////////////////////////////////////////////////////
+	//read current values of 16-byte block
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+	eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+	efuseDataOffset =  EFUSE_DATA3;
+	for(i=0; i< 4; i++)
+	{
+		RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]);
+		efuseDataOffset -=  4;
+	}
+
+	//Update the value, the offset is multiple of 2, length is 2
+	efuseDataOffset = (Offset & 0xc) >> 2;
+	data = pData[0] & 0xffff;
+	//The offset should be 0x***10 or 0x***00
+	if((Offset % 4) != 0)
+	{
+		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16);
+	}
+	else
+	{
+		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data;
+	}
+
+	efuseDataOffset =  EFUSE_DATA3;
+	for(i=0; i< 4; i++)
+	{
+		RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]);
+		efuseDataOffset -= 4;
+	}
+	/////////////////////////////////////////////////////////////////
+
+	//Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+	eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+	//Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+
+		RTMPusecDelay(2);
+		i++;
+	}
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData)
+{
+	USHORT	i;
+	USHORT	eFuseData;
+	USHORT	LogicalAddress, BlkNum = 0xffff;
+	UCHAR	EFSROM_AOUT;
+
+	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+	USHORT buffer[8];
+	BOOLEAN		bWriteSuccess = TRUE;
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData));
+
+	//Step 0. find the entry in the mapping table
+	//The address of EEPROM is 2-bytes alignment.
+	//The last bit is used for alignment, so it must be 0.
+	tmpOffset = Offset & 0xfffe;
+	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+	if( EFSROM_AOUT == 0x3f)
+	{	//find available logical address pointer
+		//the logical address does not exist, find an empty one
+		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
+		//==>48*16-3(reserved)=2FC
+		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+		{
+			//Retrive the logical block nubmer form each logical address pointer
+			//It will access two logical address pointer each time.
+			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+			if( (LogicalAddress & 0xff) == 0)
+			{//Not used logical address pointer
+				BlkNum = i-EFUSE_USAGE_MAP_START;
+				break;
+			}
+			else if(( (LogicalAddress >> 8) & 0xff) == 0)
+			{//Not used logical address pointer
+				if (i != EFUSE_USAGE_MAP_END)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START+1;
+				}
+				break;
+			}
+		}
+	}
+	else
+	{
+		BlkNum = EFSROM_AOUT;
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+	if(BlkNum == 0xffff)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+		return FALSE;
+	}
+
+	//Step 1. Save data of this block	which is pointed by the avaible logical address pointer
+	// read and save the original block data
+	for(i =0; i<8; i++)
+	{
+		addr = BlkNum * 0x10 ;
+
+		InBuf[0] = addr+2*i;
+		InBuf[1] = 2;
+		InBuf[2] = 0x0;
+
+		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+		buffer[i] = InBuf[2];
+	}
+
+	//Step 2. Update the data in buffer, and write the data to Efuse
+	buffer[ (Offset >> 1) % 8] = pData[0];
+
+	do
+	{
+		//Step 3. Write the data to Efuse
+		if(!bWriteSuccess)
+		{
+			for(i =0; i<8; i++)
+			{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+2*i;
+				InBuf[1] = 2;
+				InBuf[2] = buffer[i];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+			}
+		}
+		else
+		{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+(Offset % 16);
+				InBuf[1] = 2;
+				InBuf[2] = pData[0];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+		}
+
+		//Step 4. Write mapping table
+		addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+		tmpaddr = addr;
+
+		if(addr % 2 != 0)
+			addr = addr -1;
+		InBuf[0] = addr;
+		InBuf[1] = 2;
+
+		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+		tmpOffset = Offset;
+		tmpOffset >>= 4;
+		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+		// write the logical address
+		if(tmpaddr%2 != 0)
+			InBuf[2] = tmpOffset<<8;
+		else
+			InBuf[2] = tmpOffset;
+
+		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+		//Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+		bWriteSuccess = TRUE;
+		for(i =0; i<8; i++)
+		{
+			addr = BlkNum * 0x10 ;
+
+			InBuf[0] = addr+2*i;
+			InBuf[1] = 2;
+			InBuf[2] = 0x0;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			if(buffer[i] != InBuf[2])
+			{
+				bWriteSuccess = FALSE;
+				break;
+			}
+		}
+
+		//Step 6. invlidate mapping entry and find a free mapping entry if not succeed
+		if (!bWriteSuccess)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+			// the offset of current mapping entry
+			addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+			//find a new mapping entry
+			BlkNum = 0xffff;
+			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+			{
+				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+				if( (LogicalAddress & 0xff) == 0)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START;
+					break;
+				}
+				else if(( (LogicalAddress >> 8) & 0xff) == 0)
+				{
+					if (i != EFUSE_USAGE_MAP_END)
+					{
+						BlkNum = i+1-EFUSE_USAGE_MAP_START;
+					}
+					break;
+				}
+			}
+			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+			if(BlkNum == 0xffff)
+			{
+				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+				return FALSE;
+			}
+
+			//invalidate the original mapping entry if new entry is not found
+			tmpaddr = addr;
+
+			if(addr % 2 != 0)
+				addr = addr -1;
+			InBuf[0] = addr;
+			InBuf[1] = 2;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			// write the logical address
+			if(tmpaddr%2 != 0)
+			{
+				// Invalidate the high byte
+				for (i=8; i<15; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			else
+			{
+				// invalidate the low byte
+				for (i=0; i<8; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+		}
+	}
+	while(!bWriteSuccess);
+
+	return TRUE;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFuseWritePhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	PUSHORT lpInBuffer,
+	ULONG nInBufferSize,
+  	PUCHAR lpOutBuffer,
+  	ULONG nOutBufferSize
+)
+{
+	USHORT* pInBuf = (USHORT*)lpInBuffer;
+	int 		i;
+	//USHORT* pOutBuf = (USHORT*)ioBuffer;
+
+	USHORT Offset = pInBuf[0];					//addr
+	USHORT Length = pInBuf[1];					//length
+	USHORT* pValueX = &pInBuf[2];				//value ...
+		// Little-endian		S	|	S	Big-endian
+		// addr	3	2	1	0	|	0	1	2	3
+		// Ori-V	D	C	B	A	|	A	B	C	D
+		//After swapping
+		//		D	C	B	A	|	D	C	B	A
+		//Both the little and big-endian use the same sequence to write  data.
+		//Therefore, we only need swap data when read the data.
+	for(i=0; i<Length; i+=2)
+	{
+		eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+	}
+}
+
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseWrite(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData,
+	IN	USHORT			length)
+{
+	int i;
+
+	USHORT* pValueX = (PUSHORT) pData;				//value ...
+		//The input value=3070 will be stored as following
+ 		// Little-endian		S	|	S	Big-endian
+		// addr			1	0	|	0	1
+		// Ori-V			30	70	|	30	70
+		//After swapping
+		//				30	70	|	70	30
+		//Casting
+		//				3070	|	7030 (x)
+		//The swapping should be removed for big-endian
+	for(i=0; i<length; i+=2)
+	{
+		eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+	}
+
+	return TRUE;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+INT set_eFuseGetFreeBlockCount_Proc(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+	USHORT i;
+	USHORT	LogicalAddress;
+	USHORT efusefreenum=0;
+	if(!pAd->bUseEfuse)
+		return FALSE;
+	for (i = EFUSE_USAGE_MAP_START; i <= EFUSE_USAGE_MAP_END; i+=2)
+	{
+		eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+		if( (LogicalAddress & 0xff) == 0)
+		{
+			efusefreenum= (UCHAR) (EFUSE_USAGE_MAP_END-i+1);
+			break;
+		}
+		else if(( (LogicalAddress >> 8) & 0xff) == 0)
+		{
+			efusefreenum = (UCHAR) (EFUSE_USAGE_MAP_END-i);
+			break;
+		}
+
+		if(i == EFUSE_USAGE_MAP_END)
+			efusefreenum = 0;
+	}
+	printk("efuseFreeNumber is %d\n",efusefreenum);
+	return TRUE;
+}
+INT set_eFusedump_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+USHORT InBuf[3];
+	INT i=0;
+	if(!pAd->bUseEfuse)
+		return FALSE;
+	for(i =0; i<EFUSE_USAGE_MAP_END/2; i++)
+	{
+		InBuf[0] = 2*i;
+		InBuf[1] = 2;
+		InBuf[2] = 0x0;
+
+		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+		if(i%4==0)
+		printk("\nBlock %x:",i/8);
+		printk("%04x ",InBuf[2]);
+	}
+	return TRUE;
+}
+INT	set_eFuseLoadFromBin_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+	CHAR					*src;
+	struct file				*srcf;
+	INT 					retval, orgfsuid, orgfsgid;
+   	mm_segment_t			orgfs;
+	UCHAR					*buffer;
+	UCHAR					BinFileSize=0;
+	INT						i = 0,j=0,k=1;
+	USHORT					*PDATA;
+	USHORT					DATA;
+	BinFileSize=strlen("RT30xxEEPROM.bin");
+	src = kmalloc(128, MEM_ALLOC_FLAG);
+	NdisZeroMemory(src, 128);
+
+ 	if(strlen(arg)>0)
+	{
+
+		NdisMoveMemory(src, arg, strlen(arg));
+ 	}
+
+	else
+	{
+
+		NdisMoveMemory(src, "RT30xxEEPROM.bin", BinFileSize);
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
+	buffer = kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG);
+
+	if(buffer == NULL)
+	{
+		kfree(src);
+		 return FALSE;
+}
+	PDATA=kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG);
+
+	if(PDATA==NULL)
+	{
+		kfree(src);
+
+		kfree(buffer);
+		return FALSE;
+	}
+	/* Don't change to uid 0, let the file be opened as the "normal" user */
+#if 0
+	orgfsuid = current->fsuid;
+	orgfsgid = current->fsgid;
+	current->fsuid=current->fsgid = 0;
+#endif
+    	orgfs = get_fs();
+   	 set_fs(KERNEL_DS);
+
+	if (src && *src)
+	{
+		srcf = filp_open(src, O_RDONLY, 0);
+		if (IS_ERR(srcf))
+		{
+			DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
+			return FALSE;
+		}
+		else
+		{
+			// The object must have a read method
+			if (srcf->f_op && srcf->f_op->read)
+			{
+				memset(buffer, 0x00, MAX_EEPROM_BIN_FILE_SIZE);
+				while(srcf->f_op->read(srcf, &buffer[i], 1, &srcf->f_pos)==1)
+				{
+					DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[i]));
+					if((i+1)%8==0)
+						DBGPRINT(RT_DEBUG_TRACE, ("\n"));
+              			i++;
+						if(i>=MAX_EEPROM_BIN_FILE_SIZE)
+							{
+								DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld reading %s, The file is too large[1024]\n", -PTR_ERR(srcf),src));
+								kfree(PDATA);
+								kfree(buffer);
+								kfree(src);
+								return FALSE;
+							}
+			       }
+			}
+			else
+			{
+						DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n"));
+						kfree(PDATA);
+						kfree(buffer);
+						kfree(src);
+						return FALSE;
+			}
+      		}
+
+
+	}
+	else
+		{
+					DBGPRINT(RT_DEBUG_ERROR, ("--> Error src  or srcf is null\n"));
+					kfree(PDATA);
+					kfree(buffer);
+					return FALSE;
+
+		}
+
+
+	retval=filp_close(srcf,NULL);
+
+	if (retval)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
+	}
+	set_fs(orgfs);
+#if 0
+	current->fsuid = orgfsuid;
+	current->fsgid = orgfsgid;
+#endif
+	for(j=0;j<i;j++)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j]));
+		if((j+1)%2==0)
+			PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff);
+		if(j%16==0)
+		{
+			k=buffer[j];
+		}
+		else
+		{
+			k&=buffer[j];
+			if((j+1)%16==0)
+			{
+
+				DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16));
+
+				if(k!=0xff)
+					eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+				else
+					{
+						if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f)
+							eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+					}
+				/*
+				for(l=0;l<8;l++)
+					printk("%04x ",PDATA[l]);
+				printk("\n");
+				*/
+				NdisZeroMemory(PDATA,16);
+
+
+			}
+		}
+
+
+	}
+
+
+	kfree(PDATA);
+	kfree(buffer);
+	kfree(src);
+	return TRUE;
+}
+NTSTATUS eFuseWriteRegistersFromBin(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData)
+{
+	USHORT	i;
+	USHORT	eFuseData;
+	USHORT	LogicalAddress, BlkNum = 0xffff;
+	UCHAR	EFSROM_AOUT,Loop=0;
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	USHORT	efuseDataOffset;
+	UINT32	data,tempbuffer;
+	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+	UINT32 buffer[4];
+	BOOLEAN		bWriteSuccess = TRUE;
+	BOOLEAN		bNotWrite=TRUE;
+	BOOLEAN		bAllocateNewBlk=TRUE;
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3)));
+
+	do
+	{
+	//Step 0. find the entry in the mapping table
+	//The address of EEPROM is 2-bytes alignment.
+	//The last bit is used for alignment, so it must be 0.
+	Loop++;
+	tmpOffset = Offset & 0xfffe;
+	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+	if( EFSROM_AOUT == 0x3f)
+	{	//find available logical address pointer
+		//the logical address does not exist, find an empty one
+		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
+		//==>48*16-3(reserved)=2FC
+		bAllocateNewBlk=TRUE;
+		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+		{
+			//Retrive the logical block nubmer form each logical address pointer
+			//It will access two logical address pointer each time.
+			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+			if( (LogicalAddress & 0xff) == 0)
+			{//Not used logical address pointer
+				BlkNum = i-EFUSE_USAGE_MAP_START;
+				break;
+			}
+			else if(( (LogicalAddress >> 8) & 0xff) == 0)
+			{//Not used logical address pointer
+				if (i != EFUSE_USAGE_MAP_END)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START+1;
+				}
+				break;
+			}
+		}
+	}
+	else
+	{
+		bAllocateNewBlk=FALSE;
+		BlkNum = EFSROM_AOUT;
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+	if(BlkNum == 0xffff)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+		return FALSE;
+	}
+	//Step 1.1.0
+	//If the block is not existing in mapping table, create one
+	//and write down the 16-bytes data to the new block
+	if(bAllocateNewBlk)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n"));
+		efuseDataOffset =  EFUSE_DATA3;
+		for(i=0; i< 4; i++)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i]));
+			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+
+
+			RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer);
+			efuseDataOffset -= 4;
+
+		}
+		/////////////////////////////////////////////////////////////////
+
+		//Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+		eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ;
+
+		//Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+		eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+		//Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+		eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+
+		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+		//Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
+		i = 0;
+		while(i < 100)
+		{
+			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+				break;
+
+			RTMPusecDelay(2);
+			i++;
+		}
+
+	}
+	else
+	{	//Step1.2.
+		//If the same logical number is existing, check if the writting data and the data
+		//saving in this block are the same.
+		/////////////////////////////////////////////////////////////////
+		//read current values of 16-byte block
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		//Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+		eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+		//Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+		eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+		//Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+		eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+		//Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+		i = 0;
+		while(i < 100)
+		{
+			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+				break;
+			RTMPusecDelay(2);
+			i++;
+		}
+
+		//Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+		efuseDataOffset =  EFUSE_DATA3;
+		for(i=0; i< 4; i++)
+		{
+			RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]);
+			efuseDataOffset -=  4;
+		}
+		//Step1.2.5. Check if the data of efuse and the writing data are the same.
+		for(i =0; i<4; i++)
+		{
+			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+			DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer));
+
+			if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i]))
+				bNotWrite&=TRUE;
+			else
+			{
+				bNotWrite&=FALSE;
+				break;
+			}
+		}
+		if(!bNotWrite)
+		{
+		printk("The data is not the same\n");
+
+			for(i =0; i<8; i++)
+			{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+2*i;
+				InBuf[1] = 2;
+				InBuf[2] = pData[i];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+			}
+
+		}
+		else
+			return TRUE;
+	     }
+
+
+
+		//Step 2. Write mapping table
+		addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+		tmpaddr = addr;
+
+		if(addr % 2 != 0)
+			addr = addr -1;
+		InBuf[0] = addr;
+		InBuf[1] = 2;
+
+		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+		tmpOffset = Offset;
+		tmpOffset >>= 4;
+		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+		// write the logical address
+		if(tmpaddr%2 != 0)
+			InBuf[2] = tmpOffset<<8;
+		else
+			InBuf[2] = tmpOffset;
+
+		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+		//Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+		bWriteSuccess = TRUE;
+		for(i =0; i<8; i++)
+		{
+			addr = BlkNum * 0x10 ;
+
+			InBuf[0] = addr+2*i;
+			InBuf[1] = 2;
+			InBuf[2] = 0x0;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+			DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2]));
+			if(pData[i] != InBuf[2])
+			{
+				bWriteSuccess = FALSE;
+				break;
+			}
+		}
+
+		//Step 4. invlidate mapping entry and find a free mapping entry if not succeed
+
+		if (!bWriteSuccess&&Loop<2)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+			// the offset of current mapping entry
+			addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+			//find a new mapping entry
+			BlkNum = 0xffff;
+			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+			{
+				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+				if( (LogicalAddress & 0xff) == 0)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START;
+					break;
+				}
+				else if(( (LogicalAddress >> 8) & 0xff) == 0)
+				{
+					if (i != EFUSE_USAGE_MAP_END)
+					{
+						BlkNum = i+1-EFUSE_USAGE_MAP_START;
+					}
+					break;
+				}
+			}
+			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+			if(BlkNum == 0xffff)
+			{
+				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n"));
+				return FALSE;
+			}
+
+			//invalidate the original mapping entry if new entry is not found
+			tmpaddr = addr;
+
+			if(addr % 2 != 0)
+				addr = addr -1;
+			InBuf[0] = addr;
+			InBuf[1] = 2;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			// write the logical address
+			if(tmpaddr%2 != 0)
+			{
+				// Invalidate the high byte
+				for (i=8; i<15; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			else
+			{
+				// invalidate the low byte
+				for (i=0; i<8; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+		}
+
+	}
+	while(!bWriteSuccess&&Loop<2);
+
+	return TRUE;
 }
 
+#endif // RT30xx //
+//2008/09/11:KH add to support efuse-->
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 399ced2..f1962e0 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -447,7 +447,13 @@ FREQUENCY_ITEM FreqItems3020[] =
 	{13,   247,	 2,  2},
 	{14,   248,	 2,  4},
 };
+#ifndef RT30xx
 #define	NUM_OF_3020_CHNL	(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM))
+#endif
+#ifdef RT30xx
+//2008/07/10:KH Modified to share this variable
+UCHAR	NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM));
+#endif
 
 /*
 	==========================================================================
@@ -638,7 +644,10 @@ VOID MlmeHandler(
 VOID MlmeHalt(
 	IN PRTMP_ADAPTER pAd)
 {
-	BOOLEAN 	  Cancelled;
+	BOOLEAN		Cancelled;
+#ifdef RT3070
+	UINT32		TxPinCfg = 0x00050F0F;
+#endif // RT3070 //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
 
@@ -679,6 +688,16 @@ VOID MlmeHalt(
             RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
         }
 #endif // RT2870 //
+#ifdef RT3070
+		//
+		// Turn off LNA_PE
+		//
+		if (IS_RT3070(pAd) || IS_RT3071(pAd))
+		{
+			TxPinCfg &= 0xFFFFF0F0;
+			RTUSBWriteMACRegister(pAd, TX_PIN_CFG, TxPinCfg);
+		}
+#endif // RT3070 //
 	}
 
 	RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled
@@ -789,6 +808,10 @@ VOID MlmePeriodicExec(
 //	RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
 	pAd->Mlme.PeriodicRound ++;
 
+#ifdef RT3070
+	// execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
+	NICUpdateFifoStaCounters(pAd);
+#endif // RT3070 //
 	// execute every 500ms
 	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
 	{
@@ -852,6 +875,7 @@ VOID MlmePeriodicExec(
 							 pAd->RalinkCounters.OneSecTxRetryOkCount +
 							 pAd->RalinkCounters.OneSecTxFailCount;
 
+			// dynamic adjust antenna evaluation period according to the traffic
 			if (TxTotalCnt > 50)
 			{
 				if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
@@ -1334,7 +1358,10 @@ VOID MlmeSelectTxRateTable(
 
 		//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 		if ((pEntry->RateLen == 4)
+#ifndef RT30xx
+//Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode
 			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
+#endif
 			)
 		{// B only AP
 			*ppTable = RateSwitchTable11B;
@@ -2501,6 +2528,7 @@ VOID MlmeCheckPsmChange(
 	if (INFRA_ON(pAd) &&
 		(PowerMode != Ndis802_11PowerModeCAM) &&
 		(pAd->StaCfg.Psm == PWR_ACTIVE) &&
+#ifndef RT30xx
 		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
 	{
 		NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
@@ -2515,6 +2543,42 @@ VOID MlmeCheckPsmChange(
 			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
 		}
 	}
+#endif
+#ifdef RT30xx
+//		(! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&&
+		(pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
+		(pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
+	{
+		// add by johnli, use Rx OK data count per second to calculate throughput
+		// If Ttraffic is too high ( > 400 Rx per second), don't go to sleep mode. If tx rate is low, use low criteria
+		// Mode=CCK/MCS=3 => 11 Mbps, Mode=OFDM/MCS=3 => 18 Mbps
+		if (((pAd->StaCfg.HTPhyMode.field.MCS <= 3) &&
+/* Iverson mark
+				(pAd->StaCfg.HTPhyMode.field.MODE <= MODE_OFDM) &&
+*/
+				(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)100)) ||
+			((pAd->StaCfg.HTPhyMode.field.MCS > 3) &&
+/* Iverson mark
+			(pAd->StaCfg.HTPhyMode.field.MODE > MODE_OFDM) &&
+*/
+			(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)400)))
+		{
+				// Get this time
+			NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
+			pAd->RalinkCounters.RxCountSinceLastNULL = 0;
+			MlmeSetPsmBit(pAd, PWR_SAVE);
+			if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
+			{
+				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
+			}
+			else
+			{
+				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
+			}
+		}
+	}
+#endif
 }
 
 // IRQL = PASSIVE_LEVEL
@@ -2529,7 +2593,9 @@ VOID MlmeSetPsmBit(
 	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
 	csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
 	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
+#ifndef RT30xx
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
+#endif
 }
 
 // IRQL = DISPATCH_LEVEL
@@ -3560,9 +3626,21 @@ ULONG BssTableSetEntry(
 	}
 	else
 	{
+#ifndef RT30xx
 		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
 					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
 					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
+#endif
+#ifdef RT30xx
+		/* avoid  Hidden SSID form beacon to overwirite correct SSID from probe response */
+		if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) ||
+			(NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen)))
+		{
+			BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
+						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
+						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
+		}
+#endif
 	}
 
 	return Idx;
@@ -3623,9 +3701,14 @@ VOID BssTableSsidSort(
 							continue;
 
 					// check group cipher
+#ifndef RT30xx
 					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
 						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
 						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
+#endif
 						continue;
 
 					// check pairwise cipher, skip if none matched
@@ -3644,9 +3727,14 @@ VOID BssTableSsidSort(
 							continue;
 
 					// check group cipher
+#ifndef RT30xx
 					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
 						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
 						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
+#endif
 						continue;
 
 					// check pairwise cipher, skip if none matched
@@ -3924,10 +4012,16 @@ VOID BssCipherParse(
 				switch (*pTmp)
 				{
 					case 1:
+#ifndef RT30xx
 						pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
 						break;
 					case 5:
 						pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
+						pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
 						break;
 					case 2:
 						pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -4014,7 +4108,6 @@ VOID BssCipherParse(
 					pBss->AuthMode	  = Ndis802_11AuthModeWPANone;
 					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
 					pBss->WepStatus   = pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
 					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
 						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
 				}
@@ -4044,10 +4137,16 @@ VOID BssCipherParse(
 				switch (pCipher->Type)
 				{
 					case 1:
+#ifndef RT30xx
 						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
 						break;
 					case 5:
 						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
+						pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
 						break;
 					case 2:
 						pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -4141,7 +4240,6 @@ VOID BssCipherParse(
 					pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
 					pBss->WPA.GroupCipher	= pBss->WPA2.GroupCipher;
 					pBss->WepStatus 		= pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
 					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
 						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
 				}
@@ -5249,6 +5347,277 @@ VOID 	AsicUpdateProtect(
 	}
 }
 
+
+#ifdef RT30xx
+/*
+	========================================================================
+
+	Routine Description: Write RT30xx RF register through MAC
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS RT30xxWriteRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	UCHAR			Value)
+{
+	RF_CSR_CFG_STRUC	rfcsr;
+	UINT				i = 0;
+
+	do
+	{
+		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+		if (!rfcsr.field.RF_CSR_KICK)
+			break;
+		i++;
+	}
+	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
+
+	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+	{
+		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
+		return STATUS_UNSUCCESSFUL;
+	}
+
+	rfcsr.field.RF_CSR_WR = 1;
+	rfcsr.field.RF_CSR_KICK = 1;
+	rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+	rfcsr.field.RF_CSR_DATA = Value;
+
+	RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+
+	return STATUS_SUCCESS;
+}
+
+
+/*
+	========================================================================
+
+	Routine Description: Read RT30xx RF register through MAC
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS RT30xxReadRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	PUCHAR			pValue)
+{
+	RF_CSR_CFG_STRUC	rfcsr;
+	UINT				i=0, k=0;
+
+	for (i=0; i<MAX_BUSY_COUNT; i++)
+	{
+		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+		if (rfcsr.field.RF_CSR_KICK == BUSY)
+		{
+			continue;
+		}
+		rfcsr.word = 0;
+		rfcsr.field.RF_CSR_WR = 0;
+		rfcsr.field.RF_CSR_KICK = 1;
+		rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+		RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+		for (k=0; k<MAX_BUSY_COUNT; k++)
+		{
+			RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+			if (rfcsr.field.RF_CSR_KICK == IDLE)
+				break;
+		}
+		if ((rfcsr.field.RF_CSR_KICK == IDLE) &&
+			(rfcsr.field.TESTCSR_RFACC_REGNUM == RegID))
+		{
+			*pValue = (UCHAR)rfcsr.field.RF_CSR_DATA;
+			break;
+		}
+	}
+	if (rfcsr.field.RF_CSR_KICK == BUSY)
+	{
+		DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", RegID, rfcsr.word,i,k));
+		return STATUS_UNSUCCESSFUL;
+	}
+
+	return STATUS_SUCCESS;
+}
+#endif // RT30xx //
+
+#ifdef RT30xx
+// add by johnli, RF power sequence setup
+/*
+	==========================================================================
+	Description:
+
+	Load RF normal operation-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxLoadRFNormalModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+
+	// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue = (RFValue & (~0x0C)) | 0x31;
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// TX_LO2_en, RF R15 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
+
+	// TX_LO1_en, RF R17 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
+	RFValue &= (~0x08);
+	// to fix rx long range issue
+	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
+	{
+		RFValue |= 0x20;
+	}
+	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
+
+	// RX_LO1_en, RF R20 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
+
+	// RX_LO2_en, RF R21 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 2 to 0
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	if ((pAd->MACVersion & 0xffff) < 0x0211)
+		RFValue = (RFValue & (~0x77)) | 0x3;
+	else
+		RFValue = (RFValue & (~0x77));
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+	/* end johnli */
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Load RF sleep-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxLoadRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+	// RF_BLOCK_en. RF R1 register Bit 0 to 0
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue &= (~0x01);
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
+	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+	RFValue &= (~0x30);
+	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+	RFValue &= (~0x0E);
+	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+	// RX_CTB_en, RF R21 register Bit 7 to 0
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue &= (~0x80);
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 0, Bit 1 & Bit 2 to 1
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	RFValue |= 0x77;
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+	RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+	MACValue |= 0x1D000000;
+	RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Reverse RF sleep-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxReverseRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+	// RF_BLOCK_en, RF R1 register Bit 0 to 1
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue |= 0x01;
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
+	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+	RFValue |= 0x30;
+	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
+	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+	RFValue |= 0x0E;
+	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+	// RX_CTB_en, RF R21 register Bit 7 to 1
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue |= 0x80;
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 2 to 0
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	if ((pAd->MACVersion & 0xffff) < 0x0211)
+		RFValue = (RFValue & (~0x77)) | 0x3;
+	else
+		RFValue = (RFValue & (~0x77));
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+	// RT3071 version E has fixed this issue
+	if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+	{
+		// patch tx EVM issue temporarily
+		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+		MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
+		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+	}
+	else
+	{
+		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+		MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
+		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+	}
+}
+// end johnli
+#endif // RT30xx //
+
 /*
 	==========================================================================
 	Description:
@@ -5270,6 +5639,21 @@ VOID AsicSwitchChannel(
 	RTMP_RF_REGS *RFRegTable;
 
 	// Search Tx power value
+#ifdef RT30xx
+	// We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
+	// in ChannelList, so use TxPower array instead.
+	//
+	for (index = 0; index < MAX_NUM_OF_CHANNELS; index++)
+	{
+		if (Channel == pAd->TxPower[index].Channel)
+		{
+			TxPwer = pAd->TxPower[index].Power;
+			TxPwer2 = pAd->TxPower[index].Power2;
+			break;
+		}
+	}
+#endif
+#ifndef RT30xx
 	for (index = 0; index < pAd->ChannelListNum; index++)
 	{
 		if (Channel == pAd->ChannelList[index].Channel)
@@ -5279,15 +5663,27 @@ VOID AsicSwitchChannel(
 			break;
 		}
 	}
+#endif
 
 	if (index == MAX_NUM_OF_CHANNELS)
 	{
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel));
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Can't find the Channel#%d \n", Channel));
+#endif
 	}
 
 #ifdef RT2870
 	// The RF programming sequence is difference between 3xxx and 2xxx
+#ifdef RT30xx
+	if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020) ||
+		(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022)))
+#endif
+#ifndef RT30xx
 	if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
+#endif
 	{
 		/* modify by WY for Read RF Reg. error */
 		UCHAR RFValue;
@@ -5300,6 +5696,7 @@ VOID AsicSwitchChannel(
 				RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
 				RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
 
+#ifndef RT30xx
 				RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
 				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
 				RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
@@ -5313,7 +5710,42 @@ VOID AsicSwitchChannel(
 				RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
 				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
 				RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
+#endif
+#ifdef RT30xx
+				RT30xxReadRFRegister(pAd, RF_R06, &RFValue);
+				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
+				RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
+
+				// Set Tx0 Power
+				RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
+				RFValue = (RFValue & 0xE0) | TxPwer;
+				RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
+
+				// Set Tx1 Power
+				RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
+				RFValue = (RFValue & 0xE0) | TxPwer2;
+				RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
+
+				// Tx/Rx Stream setting
+				RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+				//if (IS_RT3090(pAd))
+				//	RFValue |= 0x01; // Enable RF block.
+				RFValue &= 0x03;	//clear bit[7~2]
+				if (pAd->Antenna.field.TxPath == 1)
+					RFValue |= 0xA0;
+				else if (pAd->Antenna.field.TxPath == 2)
+					RFValue |= 0x80;
+				if (pAd->Antenna.field.RxPath == 1)
+					RFValue |= 0x50;
+				else if (pAd->Antenna.field.RxPath == 2)
+					RFValue |= 0x40;
+				RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
 
+				// Set RF offset
+				RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
+				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
+				RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
+#endif
 				// Set BW
 				if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
 				{
@@ -5324,6 +5756,7 @@ VOID AsicSwitchChannel(
 				{
 					RFValue = pAd->Mlme.CaliBW20RfR24;
 				}
+#ifndef RT30xx
 				RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
 
 				// Enable RF tuning
@@ -5333,11 +5766,34 @@ VOID AsicSwitchChannel(
 
 				// latch channel for future usage.
 				pAd->LatchRfRegs.Channel = Channel;
+#endif
+#ifdef RT30xx
+				RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
+				RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
 
+				// Enable RF tuning
+				RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+				RFValue = RFValue | 0x1;
+				RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+				// latch channel for future usage.
+				pAd->LatchRfRegs.Channel = Channel;
+
+				DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
+					Channel,
+					pAd->RfIcType,
+					TxPwer,
+					TxPwer2,
+					pAd->Antenna.field.TxPath,
+					FreqItems3020[index].N,
+					FreqItems3020[index].K,
+					FreqItems3020[index].R));
+#endif
 				break;
 			}
 		}
 
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
 			Channel,
 			pAd->RfIcType,
@@ -5347,6 +5803,7 @@ VOID AsicSwitchChannel(
 			FreqItems3020[index].N,
 			FreqItems3020[index].K,
 			FreqItems3020[index].R));
+#endif
 	}
 	else
 #endif // RT2870 //
@@ -5603,6 +6060,53 @@ VOID	AsicAntennaSelect(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	UCHAR			Channel)
 {
+#ifdef RT30xx
+			if (pAd->Mlme.OneSecPeriodicRound % 2 == 1)
+			{
+				// patch for AsicSetRxAnt failed
+				pAd->RxAnt.EvaluatePeriod = 0;
+
+				// check every 2 second. If rcv-beacon less than 5 in the past 2 second, then AvgRSSI is no longer a
+				// valid indication of the distance between this AP and its clients.
+				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+				{
+					SHORT	realavgrssi1;
+
+					// if no traffic then reset average rssi to trigger evaluation
+					if (pAd->StaCfg.NumOfAvgRssiSample < 5)
+					{
+						pAd->RxAnt.Pair1LastAvgRssi = (-99);
+						pAd->RxAnt.Pair2LastAvgRssi = (-99);
+						DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no traffic/beacon, reset RSSI\n"));
+					}
+
+					pAd->StaCfg.NumOfAvgRssiSample = 0;
+					realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
+
+					DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
+
+					// if the difference between two rssi is larger or less than 5, then evaluate the other antenna
+					if ((pAd->RxAnt.EvaluateStableCnt < 2) || (realavgrssi1 > (pAd->RxAnt.Pair1LastAvgRssi + 5)) || (realavgrssi1 < (pAd->RxAnt.Pair1LastAvgRssi - 5)))
+					{
+						pAd->RxAnt.Pair1LastAvgRssi = realavgrssi1;
+						AsicEvaluateRxAnt(pAd);
+					}
+				}
+				else
+				{
+					// if not connected, always switch antenna to try to connect
+					UCHAR	temp;
+
+					temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+					pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+					pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+					DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no connect, switch to another one to try connection\n"));
+
+					AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+				}
+			}
+#endif /* RT30xx */
 }
 
 /*
@@ -6320,6 +6824,14 @@ VOID AsicSetEdcaParm(
 				Ac0Cfg.field.Aifsn = 3;
 				Ac2Cfg.field.AcTxop = 5;
 			}
+
+#ifdef RT30xx
+			if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+			{
+				// Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
+				Ac2Cfg.field.Aifsn = 5;
+			}
+#endif // RT30xx //
 		}
 
 		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
@@ -6386,7 +6898,7 @@ VOID AsicSetEdcaParm(
 				AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
 
 			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+			// STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
 			if (STA_TGN_WIFI_ON(pAd) &&
 				pEdcaParm->Aifsn[QID_AC_VI] == 10)
 			{
@@ -6399,6 +6911,10 @@ VOID AsicSetEdcaParm(
 		}
 
 		AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+#ifdef RT30xx
+		if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+			AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
+#endif // RT30xx //
 
 		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
@@ -6461,6 +6977,7 @@ VOID 	AsicSetSlotTime(
 	SlotTime = (bUseShortSlotTime)? 9 : 20;
 
 	{
+#ifndef RT30xx
 		// force using short SLOT time for FAE to demo performance when TxBurst is ON
 		if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
 			|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
@@ -6470,6 +6987,10 @@ VOID 	AsicSetSlotTime(
 			// And we will not set to short slot when bEnableTxBurst is TRUE.
 		}
 		else if (pAd->CommonCfg.bEnableTxBurst)
+#endif
+#ifdef RT30xx
+		if (pAd->CommonCfg.bEnableTxBurst)
+#endif
 			SlotTime = 9;
 	}
 
@@ -7302,6 +7823,58 @@ CHAR RTMPMaxRssi(
 	return larger;
 }
 
+#ifdef RT30xx
+// Antenna divesity use GPIO3 and EESK pin for control
+// Antenna and EEPROM access are both using EESK pin,
+// Therefor we should avoid accessing EESK at the same time
+// Then restore antenna after EEPROM access
+VOID AsicSetRxAnt(
+	IN PRTMP_ADAPTER	pAd,
+	IN UCHAR			Ant)
+{
+#ifdef RT30xx
+	UINT32	Value;
+	UINT32	x;
+
+	if ((pAd->EepromAccess)										||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))			||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+	{
+		return;
+	}
+
+	// the antenna selection is through firmware and MAC register(GPIO3)
+	if (Ant == 0)
+	{
+		// Main antenna
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x |= (EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
+	}
+	else
+	{
+		// Aux antenna
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x &= ~(EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		Value |= 0x08;
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
+	}
+#endif // RT30xx //
+}
+#endif /* RT30xx */
+
 /*
     ========================================================================
     Routine Description:
@@ -7320,6 +7893,7 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
+#ifndef RT30xx
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
 								fRTMP_ADAPTER_HALT_IN_PROGRESS	|
@@ -7366,6 +7940,89 @@ VOID AsicEvaluateRxAnt(
 			pAd->Mlme.bLowThroughput = TRUE;
 		}
 	}
+#endif /* RT30xx */
+#ifdef RT30xx
+	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
+							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
+							fRTMP_ADAPTER_RADIO_OFF			|
+							fRTMP_ADAPTER_NIC_NOT_EXIST		|
+							fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
+							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+							|| (pAd->EepromAccess)
+#endif // RT30xx //
+							)
+		return;
+
+
+	{
+		//if (pAd->StaCfg.Psm == PWR_SAVE)
+		//	return;
+	}
+
+	// two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
+	// one is antenna diversity:there is only one antenna can rx and tx
+	// the other is failed antenna remove:two physical antenna can rx and tx
+	if (pAd->NicConfig2.field.AntDiversity)
+	{
+		DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n",
+			pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt));
+
+		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt);
+
+		pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+		pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE;
+		pAd->RxAnt.RcvPktNumWhenEvaluate = 0;
+
+		// a one-shot timer to end the evalution
+		// dynamic adjust antenna evaluation period according to the traffic
+		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100);
+		else
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+	}
+	else
+	{
+		if (pAd->StaCfg.Psm == PWR_SAVE)
+			return;
+
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+		BBPR3 &= (~0x18);
+		if(pAd->Antenna.field.RxPath == 3)
+		{
+			BBPR3 |= (0x10);
+		}
+		else if(pAd->Antenna.field.RxPath == 2)
+		{
+			BBPR3 |= (0x8);
+		}
+		else if(pAd->Antenna.field.RxPath == 1)
+		{
+			BBPR3 |= (0x0);
+		}
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+
+		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
+			)
+		{
+			ULONG	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
+									pAd->RalinkCounters.OneSecTxRetryOkCount +
+									pAd->RalinkCounters.OneSecTxFailCount;
+
+			// dynamic adjust antenna evaluation period according to the traffic
+			if (TxTotalCnt > 50)
+			{
+				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
+				pAd->Mlme.bLowThroughput = FALSE;
+			}
+			else
+			{
+				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+				pAd->Mlme.bLowThroughput = TRUE;
+			}
+		}
+	}
+#endif /* RT30xx */
 }
 
 /*
@@ -7391,6 +8048,7 @@ VOID AsicRxAntEvalTimeout(
 	UCHAR			BBPR3 = 0;
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
 
+#ifndef RT30xx
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
 			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)		||
@@ -7449,6 +8107,107 @@ VOID AsicRxAntEvalTimeout(
 		}
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 	}
+#endif /* RT30xx */
+#ifdef RT30xx
+	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
+							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
+							fRTMP_ADAPTER_RADIO_OFF			|
+							fRTMP_ADAPTER_NIC_NOT_EXIST) ||
+							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+							|| (pAd->EepromAccess)
+#endif // RT30xx //
+							)
+		return;
+
+	{
+		//if (pAd->StaCfg.Psm == PWR_SAVE)
+		//	return;
+
+		if (pAd->NicConfig2.field.AntDiversity)
+		{
+			if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt]))
+			{
+				UCHAR			temp;
+
+				//
+				// select PrimaryRxAntPair
+				//    Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair.
+				//    Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt
+				//
+				temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+				pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+				pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+				pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3);
+				pAd->RxAnt.EvaluateStableCnt = 0;
+			}
+			else
+			{
+				// if the evaluated antenna is not better than original, switch back to original antenna
+				AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+				pAd->RxAnt.EvaluateStableCnt ++;
+			}
+
+			pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+
+			DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n",
+					pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate));
+		}
+		else
+		{
+			if (pAd->StaCfg.Psm == PWR_SAVE)
+				return;
+
+			// if the traffic is low, use average rssi as the criteria
+			if (pAd->Mlme.bLowThroughput == TRUE)
+			{
+				rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
+				rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
+				rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
+			}
+			else
+			{
+				rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
+				rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
+				rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
+			}
+
+			if(pAd->Antenna.field.RxPath == 3)
+			{
+				larger = max(rssi0, rssi1);
+
+				if (larger > (rssi2 + 20))
+					pAd->Mlme.RealRxPath = 2;
+				else
+					pAd->Mlme.RealRxPath = 3;
+			}
+			else if(pAd->Antenna.field.RxPath == 2)
+			{
+				if (rssi0 > (rssi1 + 20))
+					pAd->Mlme.RealRxPath = 1;
+				else
+					pAd->Mlme.RealRxPath = 2;
+			}
+
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+			BBPR3 &= (~0x18);
+			if(pAd->Mlme.RealRxPath == 3)
+			{
+				BBPR3 |= (0x10);
+			}
+			else if(pAd->Mlme.RealRxPath == 2)
+			{
+				BBPR3 |= (0x8);
+			}
+			else if(pAd->Mlme.RealRxPath == 1)
+			{
+				BBPR3 |= (0x0);
+			}
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+		}
+	}
+#endif /* RT30xx */
 }
 
 
@@ -7664,14 +8423,24 @@ VOID AsicStaBbpTuning(
 #ifdef RT2870
 			// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
 			// Otherwise, it will have some throughput side effect when low RSSI
+#ifndef RT30xx
 			if (IS_RT3070(pAd))
+#endif
+#ifdef RT30xx
+			if (IS_RT30xx(pAd))
+#endif
 			{
 				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
 				{
 					R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
 					if (OrigR66Value != R66)
 					{
+#ifndef RT30xx
 						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
 					}
 				}
 				else
@@ -7679,7 +8448,12 @@ VOID AsicStaBbpTuning(
 					R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
 					if (OrigR66Value != R66)
 					{
+#ifndef RT30xx
 						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
 					}
 				}
 			}
@@ -7781,12 +8555,20 @@ VOID AsicTurnOffRFClk(
 	IN PRTMP_ADAPTER pAd,
 	IN	UCHAR		Channel)
 {
-
 	// RF R2 bit 18 = 0
 	UINT32			R1 = 0, R2 = 0, R3 = 0;
 	UCHAR			index;
 	RTMP_RF_REGS	*RFRegTable;
 
+#ifdef RT30xx
+	// The RF programming sequence is difference between 3xxx and 2xxx
+	if (IS_RT3090(pAd))
+	{
+		RT30xxLoadRFSleepModeSetup(pAd);  // add by johnli,  RF power sequence setup, load RF sleep-mode setup
+	}
+	else
+	{
+#endif // RT30xx //
 	RFRegTable = RF2850RegTable;
 
 	switch (pAd->RfIcType)
@@ -7828,6 +8610,10 @@ VOID AsicTurnOffRFClk(
 		default:
 			break;
 	}
+#ifdef RT30xx
+	}
+#endif // RT30xx //
+
 }
 
 
@@ -7835,12 +8621,19 @@ VOID AsicTurnOnRFClk(
 	IN PRTMP_ADAPTER pAd,
 	IN	UCHAR			Channel)
 {
-
 	// RF R2 bit 18 = 0
 	UINT32			R1 = 0, R2 = 0, R3 = 0;
 	UCHAR			index;
 	RTMP_RF_REGS	*RFRegTable;
 
+#ifdef RT30xx
+	// The RF programming sequence is difference between 3xxx and 2xxx
+	if (IS_RT3090(pAd))
+	{
+	}
+	else
+	{
+#endif // RT30xx //
 	RFRegTable = RF2850RegTable;
 
 	switch (pAd->RfIcType)
@@ -7887,9 +8680,14 @@ VOID AsicTurnOnRFClk(
 			break;
 	}
 
+#ifndef RT30xx
 	DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n",
 		Channel,
 		pAd->RfIcType,
 		R2));
+#endif
+#ifdef RT30xx
+	}
+#endif // RT30xx //
 }
 
diff --git a/drivers/staging/rt2870/common/rtmp_init.c b/drivers/staging/rt2870/common/rtmp_init.c
index 69de5a3..92e25ff 100644
--- a/drivers/staging/rt2870/common/rtmp_init.c
+++ b/drivers/staging/rt2870/common/rtmp_init.c
@@ -38,7 +38,12 @@
     Jan Lee  2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
 */
 #include "../rt_config.h"
+#ifndef RT30xx
 #include "firmware.h"
+#endif
+#ifdef RT30xx
+#include "../../rt3070/firmware.h"
+#endif
 
 UCHAR    BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
 ULONG    BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008,
@@ -134,7 +139,12 @@ REG_PAIR   RT30xx_RFRegTable[] = {
         {RF_R06,          0x02},
         {RF_R07,          0x70},
         {RF_R09,          0x0F},
+#ifndef RT30xx
         {RF_R10,          0x71},
+#endif
+#ifdef RT30xx
+        {RF_R10,          0x41},
+#endif
         {RF_R11,          0x21},
         {RF_R12,          0x7B},
         {RF_R14,          0x90},
@@ -147,7 +157,9 @@ REG_PAIR   RT30xx_RFRegTable[] = {
         {RF_R21,          0xDB},
         {RF_R24,          0x16},
         {RF_R25,          0x01},
+#ifndef RT30xx
         {RF_R27,          0x03},
+#endif
         {RF_R29,          0x1F},
 };
 #define	NUM_RF_REG_PARMS	(sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
@@ -184,6 +196,7 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{AUTO_RSP_CFG,			0x00000013},	// Initial Auto_Responder, because QA will turn off Auto-Responder
 	{CCK_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
 	{OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
+//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 #ifdef RT2870
 	{PBF_CFG, 				0xf40006}, 		// Only enable Queue 2
 	{MM40_PROT_CFG,			0x3F44084},		// Initial Auto_Responder, because QA will turn off Auto-Responder
@@ -1070,6 +1083,7 @@ NDIS_STATUS	NICReadRegParameters(
 
 	========================================================================
 */
+#ifndef RT30xx
 VOID RTUSBFilterCalibration(
 	IN PRTMP_ADAPTER pAd)
 {
@@ -1206,13 +1220,168 @@ VOID RTUSBFilterCalibration(
 
 	DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
 }
+#endif /* RT30xx */
+#ifdef RT30xx
+VOID RTMPFilterCalibration(
+	IN PRTMP_ADAPTER pAd)
+{
+	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
+	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+	UCHAR	RF_R24_Value = 0;
+
+	// Give bbp filter initial value
+	pAd->Mlme.CaliBW20RfR24 = 0x1F;
+	pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
+
+	do
+	{
+		if (loop == 1)	//BandWidth = 40 MHz
+		{
+			// Write 0x27 to RF_R24 to program filter
+			RF_R24_Value = 0x27;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3090(pAd))
+				FilterTarget = 0x15;
+			else
+				FilterTarget = 0x19;
+
+			// when calibrate BW40, BBP mask must set to BW40.
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+			BBPValue&= (~0x18);
+			BBPValue|= (0x10);
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+			// set to BW40
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value |= 0x20;
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+		else			//BandWidth = 20 MHz
+		{
+			// Write 0x07 to RF_R24 to program filter
+			RF_R24_Value = 0x07;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3090(pAd))
+				FilterTarget = 0x13;
+			else
+				FilterTarget = 0x16;
+
+			// set to BW20
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value &= (~0x20);
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+
+		// Write 0x01 to RF_R22 to enable baseband loopback mode
+		RT30xxReadRFRegister(pAd, RF_R22, &value);
+		value |= 0x01;
+		RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+		do
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			RTMPusecDelay(1000);
+			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			R55x = value & 0xFF;
+
+		} while ((ReTry++ < 100) && (R55x == 0));
+
+		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
+
+		while(TRUE)
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			//We need to wait for calibration
+			RTMPusecDelay(1000);
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			value &= 0xFF;
+			if ((R55x - value) < FilterTarget)
+			{
+				RF_R24_Value ++;
+			}
+			else if ((R55x - value) == FilterTarget)
+			{
+				RF_R24_Value ++;
+				count ++;
+			}
+			else
+			{
+				break;
+			}
+
+			// prevent infinite loop cause driver hang.
+			if (loopcnt++ > 100)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+				break;
+			}
+
+			// Write RF_R24 to program filter
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+		}
+
+		if (count > 0)
+		{
+			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+		}
+
+		// Store for future usage
+		if (loopcnt < 100)
+		{
+			if (loop++ == 0)
+			{
+				//BandWidth = 20 MHz
+				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+			}
+			else
+			{
+				//BandWidth = 40 MHz
+				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+				break;
+			}
+		}
+		else
+			break;
+
+		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+		// reset count
+		count = 0;
+	} while(TRUE);
+
+	//
+	// Set back to initial state
+	//
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+	RT30xxReadRFRegister(pAd, RF_R22, &value);
+	value &= ~(0x01);
+	RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+	// set BBP back to BW20
+	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+	BBPValue&= (~0x18);
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
 
+	DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+#endif /* RT30xx */
 
 VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
 {
 	INT i;
 	// Driver must read EEPROM to get RfIcType before initial RF registers
 	// Initialize RF register to default value
+#ifndef RT30xx
         if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020)))
         {
                 // Init RF calibration
@@ -1234,7 +1403,86 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
                 //For RF filter Calibration
                 RTUSBFilterCalibration(pAd);
         }
+#endif
+#ifdef RT30xx
+	if (IS_RT3070(pAd) || IS_RT3071(pAd))
+	{
+		// Init RF calibration
+		// Driver should toggle RF R30 bit7 before init RF registers
+		UINT32 RfReg = 0;
+		UINT32 data;
+
+		RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+		RfReg |= 0x80;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+		RTMPusecDelay(1000);
+		RfReg &= 0x7F;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+		// Initialize RF register to default value
+		for (i = 0; i < NUM_RF_REG_PARMS; i++)
+		{
+			RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+		}
+
+		// add by johnli
+		if (IS_RT3070(pAd))
+		{
+			//  Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
+			RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+			data = ((data & 0xF0FFFFFF) | 0x0D000000);
+			RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+		}
+		else if (IS_RT3071(pAd))
+		{
+			// Driver should set RF R6 bit6 on before init RF registers
+			RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg);
+			RfReg |= 0x40;
+			RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg);
+
+			// init R31
+			RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
+
+			// RT3071 version E has fixed this issue
+			if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+			{
+				// patch tx EVM issue temporarily
+				RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+				data = ((data & 0xE0FFFFFF) | 0x0D000000);
+				RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+			}
+			else
+			{
+				RTMP_IO_READ32(pAd, LDO_CFG0, &data);
+				data = ((data & 0xE0FFFFFF) | 0x01000000);
+				RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
+			}
+
+			// patch LNA_PE_G1 failed issue
+			RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
+			data &= ~(0x20);
+			RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
+		}
+
+		//For RF filter Calibration
+		RTMPFilterCalibration(pAd);
 
+		// Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
+
+		// set led open drain enable
+		RTUSBReadMACRegister(pAd, OPT_14, &data);
+		data |= 0x01;
+		RTUSBWriteMACRegister(pAd, OPT_14, data);
+
+		if (IS_RT3071(pAd))
+		{
+			// add by johnli, RF power sequence setup, load RF normal operation-mode setup
+			RT30xxLoadRFNormalModeSetup(pAd);
+		}
+	}
+#endif
 }
 #endif // RT2870 //
 
@@ -1411,11 +1659,25 @@ VOID	NICReadEEPROMParameters(
 	Antenna.word = pAd->EEPROMDefaultValue[0];
 	if (Antenna.word == 0xFFFF)
 	{
-		Antenna.word = 0;
-		Antenna.field.RfIcType = RFIC_2820;
-		Antenna.field.TxPath = 1;
-		Antenna.field.RxPath = 2;
-		DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+#ifdef RT30xx
+		if(IS_RT3090(pAd))
+		{
+			Antenna.word = 0;
+			Antenna.field.RfIcType = RFIC_3020;
+			Antenna.field.TxPath = 1;
+			Antenna.field.RxPath = 1;
+		}
+		else
+		{
+#endif // RT30xx //
+			Antenna.word = 0;
+			Antenna.field.RfIcType = RFIC_2820;
+			Antenna.field.TxPath = 1;
+			Antenna.field.RxPath = 2;
+			DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+#ifdef RT30xx
+		}
+#endif // RT30xx //
 	}
 
 	// Choose the desired Tx&Rx stream.
@@ -1444,7 +1706,9 @@ VOID	NICReadEEPROMParameters(
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
 	{
+#ifndef RT30xx
 		NicConfig2.word = 0;
+#endif
 		if ((NicConfig2.word & 0x00ff) == 0xff)
 		{
 			NicConfig2.word &= 0xff00;
@@ -1637,6 +1901,14 @@ VOID	NICReadEEPROMParameters(
 
 	RTMPReadTxPwrPerRate(pAd);
 
+#ifdef RT30xx
+	if (IS_RT30xx(pAd))
+	{
+		eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value);
+		pAd->EFuseTag = (value & 0xff);
+	}
+#endif // RT30xx //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
 }
 
@@ -1681,16 +1953,49 @@ VOID	NICInitAsicFromEEPROM(
 		}
 	}
 
+#ifndef RT30xx
 	Antenna.word = pAd->Antenna.word;
+#endif
+#ifdef RT30xx
+	Antenna.word = pAd->EEPROMDefaultValue[0];
+	if (Antenna.word == 0xFFFF)
+	{
+		DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+		BUG_ON(Antenna.word == 0xFFFF);
+	}
+#endif
 	pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
 	pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
 
+#ifdef RT30xx
+	DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
+
+	// Save the antenna for future use
+	pAd->Antenna.word = Antenna.word;
+#endif
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
+#ifdef RT30xx
+	{
+		if ((NicConfig2.word & 0x00ff) == 0xff)
+		{
+			NicConfig2.word &= 0xff00;
+		}
 
+		if ((NicConfig2.word >> 8) == 0xff)
+		{
+			NicConfig2.word &= 0x00ff;
+		}
+	}
+#endif
 	// Save the antenna for future use
 	pAd->NicConfig2.word = NicConfig2.word;
 
+#ifdef RT30xx
+	// set default antenna as main
+	if (pAd->RfIcType == RFIC_3020)
+		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+#endif
 	//
 	// Send LED Setting to MCU.
 	//
@@ -1919,6 +2224,9 @@ NDIS_STATUS	NICInitializeAsic(
 	NTSTATUS		Status;
 	UCHAR			Value = 0xff;
 #endif // RT2870 //
+#ifdef RT30xx
+	UINT32			eFuseCtrl;
+#endif // RT30xx //
 	USHORT			KeyIdx;
 	INT				i,apidx;
 
@@ -1959,9 +2267,16 @@ NDIS_STATUS	NICInitializeAsic(
 	// Initialize MAC register to default value
 	for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
 	{
+#ifdef RT3070
+		if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd)))
+		{
+			MACRegTable[Index].Value = 0x00000400;
+		}
+#endif // RT3070 //
 		RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
 	}
 
+#ifndef RT30xx
 	if(IS_RT3070(pAd))
 	{
 		// According to Frank Hsu (from Gary Tsao)
@@ -1971,7 +2286,7 @@ NDIS_STATUS	NICInitializeAsic(
 		RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
 		RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
 	}
-
+#endif
 
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
@@ -1981,6 +2296,36 @@ NDIS_STATUS	NICInitializeAsic(
 	}
 #endif // RT2870 //
 
+#ifdef RT30xx
+	// Initialize RT3070 serial MAc registers which is different from RT2870 serial
+	if (IS_RT3090(pAd))
+	{
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+
+		// RT3071 version E has fixed this issue
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+		{
+			if (pAd->NicConfig2.field.DACTestBit == 1)
+			{
+				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
+			}
+			else
+			{
+				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F);	// To fix throughput drop drastically
+			}
+		}
+		else
+		{
+			RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
+		}
+	}
+	else if (IS_RT3070(pAd))
+	{
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
+	}
+#endif // RT30xx //
+
 	//
 	// Before program BBP, we need to wait BBP/RF get wake up.
 	//
@@ -2020,6 +2365,7 @@ NDIS_STATUS	NICInitializeAsic(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
 	}
 
+#ifndef RT30xx
 	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
 	if ((pAd->MACVersion&0xffff) != 0x0101)
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
@@ -2033,7 +2379,55 @@ NDIS_STATUS	NICInitializeAsic(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
 	}
 #endif // RT2870 //
+#endif
+#ifdef RT30xx
+	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
+	// RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
+	if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
+
+// add by johnli, RF power sequence setup
+	if (IS_RT30xx(pAd))
+	{	//update for RT3070/71/72/90/91/92.
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
+	}
+
+	if (IS_RT3090(pAd))
+	{
+		UCHAR		bbpreg=0;
 
+		// enable DC filter
+		if ((pAd->MACVersion & 0xffff) >= 0x0211)
+		{
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
+		}
+
+		// improve power consumption
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
+		if (pAd->Antenna.field.TxPath == 1)
+		{
+			// turn off tx DAC_1
+			bbpreg = (bbpreg | 0x20);
+		}
+
+		if (pAd->Antenna.field.RxPath == 1)
+		{
+			// turn off tx ADC_1
+			bbpreg &= (~0x2);
+		}
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
+
+		// improve power consumption in RT3071 Ver.E
+		if ((pAd->MACVersion & 0xffff) >= 0x0211)
+		{
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
+			bbpreg &= (~0x3);
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
+		}
+	}
+#endif
 	if (pAd->MACVersion == 0x28600100)
 	{
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
@@ -2123,6 +2517,20 @@ NDIS_STATUS	NICInitializeAsic(
 	Counter|=0x000001e;
 	RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
 #endif // RT2870 //
+#ifdef RT30xx
+	pAd->bUseEfuse=FALSE;
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl);
+	pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0;
+	if(pAd->bUseEfuse)
+	{
+			DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n"));
+	}
+	else
+	{
+			DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
+
+	}
+#endif // RT30xx //
 
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
@@ -2635,19 +3043,18 @@ NDIS_STATUS NICLoadFirmware(
 	ULONG			FileLength, Index;
 	//ULONG			firm;
 	UINT32			MacReg = 0;
-#ifdef RT2870
 	UINT32			Version = (pAd->MACVersion >> 16);
-#endif // RT2870 //
 
 	pFirmwareImage = FirmwareImage;
 	FileLength = sizeof(FirmwareImage);
-#ifdef RT2870
+
 	// New 8k byte firmware size for RT3071/RT3072
 	//printk("Usb Chip\n");
 	if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH)
 	//The firmware image consists of two parts. One is the origianl and the other is the new.
 	//Use Second Part
 	{
+#ifdef RT2870
 		if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070))
 		{	// Use Firmware V2.
 			//printk("KH:Use New Version,part2\n");
@@ -2660,6 +3067,7 @@ NDIS_STATUS NICLoadFirmware(
 			pFirmwareImage = FirmwareImage;
 			FileLength = FIRMWAREIMAGEV1_LENGTH;
 		}
+#endif // RT2870 //
 	}
 	else
 	{
@@ -2667,8 +3075,6 @@ NDIS_STATUS NICLoadFirmware(
 		Status = NDIS_STATUS_FAILURE;
 	}
 
-#endif // RT2870 //
-
 	RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
 
 	/* check if MCU is ready */
@@ -2969,7 +3375,9 @@ VOID	UserCfgInit(
 			pAd->SharedKey[bss_index][key_index].CipherAlg = CIPHER_NONE;
 		}
 	}
-
+#ifdef RT30xx
+	pAd->EepromAccess = FALSE;
+#endif
 	pAd->Antenna.word = 0;
 	pAd->CommonCfg.BBPCurrentBW = BW_20;
 
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index de8b084..7ae3e95 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -317,6 +317,7 @@ VOID	RTUSBBulkOutDataPacket(
 			break;
 		}
 
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		if (pTxInfo->QSEL != FIFO_EDCA)
 		{
 			printk("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n", __func__, pTxInfo->QSEL);
@@ -349,7 +350,7 @@ VOID	RTUSBBulkOutDataPacket(
 		pLastTxInfo = pTxInfo;
 
 		// Make sure we use EDCA QUEUE.
-		pTxInfo->QSEL = FIFO_EDCA;
+		pTxInfo->QSEL = FIFO_EDCA;  //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		ThisBulkSize += (pTxInfo->USBDMATxPktLen+4);
 		TmpBulkEndPos += (pTxInfo->USBDMATxPktLen+4);
 
@@ -975,6 +976,17 @@ VOID	RTUSBKickBulkOut(
 				RTUSBBulkOutDataPacket(pAd, 3, pAd->NextBulkOutIndex[3]);
 			}
 		}
+#ifdef RT30xx
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
+		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_5))
+		{
+			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
+				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+				))
+			{
+			}
+		}
+#endif
 
 		// 7. Null frame is the last
 		else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL))
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index 4a930f0..fd1b0c1 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -110,6 +110,12 @@ NTSTATUS RTUSBFirmwareWrite(
 	Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
 	Status = RTUSBFirmwareRun(pAd);
 
+#ifdef RT30xx
+	RTMPusecDelay(10000);
+	RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0);
+	AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware
+#endif
+
 	return Status;
 }
 
@@ -665,6 +671,7 @@ NTSTATUS	RTUSBWriteRFRegister(
 	return STATUS_SUCCESS;
 }
 
+#ifndef RT30xx
 /*
 	========================================================================
 
@@ -772,6 +779,7 @@ NTSTATUS	RT30xxReadRFRegister(
 
 	return STATUS_SUCCESS;
 }
+#endif /* RT30xx */
 
 /*
 	========================================================================
@@ -796,6 +804,14 @@ NTSTATUS	RTUSBReadEEPROM(
 {
 	NTSTATUS	Status = STATUS_SUCCESS;
 
+#ifdef RT30xx
+	if(pAd->bUseEfuse)
+	{
+		Status =eFuseRead(pAd, Offset, pData, length);
+	}
+	else
+#endif // RT30xx //
+	{
 	Status = RTUSB_VendorRequest(
 		pAd,
 		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
@@ -805,6 +821,7 @@ NTSTATUS	RTUSBReadEEPROM(
 		Offset,
 		pData,
 		length);
+	}
 
 	return Status;
 }
@@ -832,6 +849,14 @@ NTSTATUS	RTUSBWriteEEPROM(
 {
 	NTSTATUS	Status = STATUS_SUCCESS;
 
+#ifdef RT30xx
+	if(pAd->bUseEfuse)
+	{
+		Status = eFuseWrite(pAd, Offset, pData, length);
+	}
+	else
+#endif // RT30xx //
+	{
 	Status = RTUSB_VendorRequest(
 		pAd,
 		USBD_TRANSFER_DIRECTION_OUT,
@@ -841,6 +866,7 @@ NTSTATUS	RTUSBWriteEEPROM(
 		Offset,
 		pData,
 		length);
+	}
 
 	return Status;
 }
@@ -957,9 +983,13 @@ NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
 	PCmdQElmt	cmdqelmt = NULL;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
 
-
+#ifndef RT30xx
 	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
 	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+#endif
+#ifdef RT30xx
+	if (pObj->RTUSBCmdThr_pid < 0)
+#endif
 		return (NDIS_STATUS_RESOURCES);
 
 	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
@@ -1710,6 +1740,38 @@ VOID CMDHandler(
 					}
 					break;
 
+#ifdef RT30xx
+//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
+				case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry()
+				{
+					RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
+					KeyInfo = *((PRT_ADD_PAIRWISE_KEY_ENTRY)(pData));
+					AsicAddPairwiseKeyEntry(pAd,
+											KeyInfo.MacAddr,
+											(UCHAR)KeyInfo.MacTabMatchWCID,
+											&KeyInfo.CipherKey);
+				}
+					break;
+				case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry()
+				{
+					PMAC_TABLE_ENTRY pEntry;
+					UCHAR KeyIdx;
+					UCHAR CipherAlg;
+					UCHAR ApIdx;
+
+					pEntry = (PMAC_TABLE_ENTRY)(pData);
+
+						RTMPAddWcidAttributeEntry(
+										  pAd,
+										  ApIdx,
+										  KeyIdx,
+										  CipherAlg,
+										  pEntry);
+					}
+						break;
+//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
+#endif
+
 				case CMDTHREAD_SET_CLIENT_MAC_ENTRY:
 					{
 						MAC_TABLE_ENTRY *pEntry;
@@ -1756,6 +1818,16 @@ VOID CMDHandler(
 					}
 					break;
 
+#ifdef RT30xx
+// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+				case CMDTHREAD_UPDATE_PROTECT:
+					{
+						AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT), TRUE, 0);
+					}
+					break;
+// end johnli
+#endif
+
 				case OID_802_11_ADD_WEP:
 					{
 						UINT	i;
diff --git a/drivers/staging/rt2870/common/spectrum.c b/drivers/staging/rt2870/common/spectrum.c
index c2a9443..9a88c76 100644
--- a/drivers/staging/rt2870/common/spectrum.c
+++ b/drivers/staging/rt2870/common/spectrum.c
@@ -1569,7 +1569,12 @@ static VOID PeerMeasureReportAction(
 
 	if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL)
 	{
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
 		return;
 	}