iio: remove gpio interrupt probing from drivers that use a single interrupt

Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the first ACPI GPIO
interrupt in client->irq, so we can remove the probing code from
drivers that use only one interrupt.

Commit 0f0796509c07c1c7 ("iio: remove gpio interrupt probing from drivers
that use a single interrupt") removes gpio interrupt probing from most
drivers. This patch cleans the remaining ones.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2 files changed, 0 insertions, 57 deletions

diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index e72e218..c23f47a 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -17,7 +17,6 @@
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/acpi.h>
-#include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/trigger.h>
@@ -380,31 +379,6 @@ static const struct iio_trigger_ops mxc4005_trigger_ops = {
 	.owner = THIS_MODULE,
 };
 
-static int mxc4005_gpio_probe(struct i2c_client *client,
-			      struct mxc4005_data *data)
-{
-	struct device *dev;
-	struct gpio_desc *gpio;
-	int ret;
-
-	if (!client)
-		return -EINVAL;
-
-	dev = &client->dev;
-
-	gpio = devm_gpiod_get_index(dev, "mxc4005_int", 0, GPIOD_IN);
-	if (IS_ERR(gpio)) {
-		dev_err(dev, "failed to get acpi gpio index\n");
-		return PTR_ERR(gpio);
-	}
-
-	ret = gpiod_to_irq(gpio);
-
-	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
-
-	return ret;
-}
-
 static int mxc4005_chip_init(struct mxc4005_data *data)
 {
 	int ret;
@@ -470,9 +444,6 @@ static int mxc4005_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	if (client->irq < 0)
-		client->irq = mxc4005_gpio_probe(client, data);
-
 	if (client->irq > 0) {
 		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
 							   "%s-dev%d",
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index 43570b8..2493bb1 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -17,7 +17,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
-#include <linux/gpio/consumer.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/iio/iio.h>
@@ -31,7 +30,6 @@
 #include "bmg160.h"
 
 #define BMG160_IRQ_NAME		"bmg160_event"
-#define BMG160_GPIO_NAME		"gpio_int"
 
 #define BMG160_REG_CHIP_ID		0x00
 #define BMG160_CHIP_ID_VAL		0x0F
@@ -954,29 +952,6 @@ static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
 	.postdisable = bmg160_buffer_postdisable,
 };
 
-static int bmg160_gpio_probe(struct bmg160_data *data)
-
-{
-	struct device *dev;
-	struct gpio_desc *gpio;
-
-	dev = data->dev;
-
-	/* data ready gpio interrupt pin */
-	gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
-	if (IS_ERR(gpio)) {
-		dev_err(dev, "acpi gpio get index failed\n");
-		return PTR_ERR(gpio);
-	}
-
-	data->irq = gpiod_to_irq(gpio);
-
-	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio),
-		data->irq);
-
-	return 0;
-}
-
 static const char *bmg160_match_acpi_device(struct device *dev)
 {
 	const struct acpi_device_id *id;
@@ -1022,9 +997,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &bmg160_info;
 
-	if (data->irq <= 0)
-		bmg160_gpio_probe(data);
-
 	if (data->irq > 0) {
 		ret = devm_request_threaded_irq(dev,
 						data->irq,