diff options
author | Jean Delvare <khali@linux-fr.org> | 2008-06-25 08:47:35 -0400 |
---|---|---|
committer | Mark M. Hoffman <mhoffman@lightlink.com> | 2008-07-31 23:44:03 -0400 |
commit | e89e22b23bceb3fbbcfb931ad17a564b7c1eaa55 (patch) | |
tree | 906ac1a3699e51fc06d3efd3fc3679c8481cc7e3 | |
parent | 7133e56f29030b13601d3399e20050053e560860 (diff) | |
download | op-kernel-dev-e89e22b23bceb3fbbcfb931ad17a564b7c1eaa55.zip op-kernel-dev-e89e22b23bceb3fbbcfb931ad17a564b7c1eaa55.tar.gz |
hwmon: (lm85) Misc cleanups
Misc cleanups to the lm85 hardware monitoring driver:
* Mark constant arrays as const.
* Remove useless masks.
* Have lm85_write_value return void - nobody is checking the returned
value anyway and in some cases it was plain wrong.
* Remove useless initializations.
* Rename new_client to client in lm85_detect.
* Replace cascaded if/else with a switch/case in lm85_detect.
* Group similar loops in lm85_update_device.
* Remove legacy comments.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
-rw-r--r-- | drivers/hwmon/lm85.c | 151 |
1 files changed, 67 insertions, 84 deletions
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 645b98c..c7e10af 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -110,7 +110,7 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); */ /* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ +static const int lm85_scaling[] = { /* .001 Volts */ 2500, 2250, 3300, 5000, 12000, 3300, 1500, 1800 /*EMC6D100*/ }; @@ -164,7 +164,7 @@ static inline u16 FAN_TO_REG(unsigned long val) */ /* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { +static const int lm85_range_map[] = { 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 }; @@ -190,13 +190,8 @@ static int RANGE_TO_REG(int range) } #define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ /* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ +static const int lm85_freq_map[] = { /* .1 Hz */ 100, 150, 230, 300, 380, 470, 620, 940 }; @@ -209,7 +204,7 @@ static int FREQ_TO_REG(int freq) for (i = 0; i < 7; ++i) if (freq <= lm85_freq_map[i]) break; - return i & 0x07; + return i; } #define FREQ_FROM_REG(val) lm85_freq_map[(val) & 0x07] @@ -225,8 +220,8 @@ static int FREQ_TO_REG(int freq) * -2 -- PWM responds to manual control */ -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) lm85_zone_map[((val) >> 5) & 0x07] +static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5] static int ZONE_TO_REG(int zone) { @@ -237,7 +232,7 @@ static int ZONE_TO_REG(int zone) break; if (i > 7) /* Not found. */ i = 3; /* Always 100% */ - return (i & 0x07) << 5; + return i << 5; } #define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) @@ -321,7 +316,7 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, static int lm85_detach_client(struct i2c_client *client); static int lm85_read_value(struct i2c_client *client, u8 reg); -static int lm85_write_value(struct i2c_client *client, u8 reg, int value); +static void lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); static void lm85_init_client(struct i2c_client *client); @@ -1095,13 +1090,12 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { int company, verstep; - struct i2c_client *new_client = NULL; + struct i2c_client *client; struct lm85_data *data; int err = 0; - const char *type_name = ""; + const char *type_name; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ goto ERROR0; } @@ -1115,21 +1109,20 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR0; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &lm85_driver; /* Now, we do the remaining detection. */ - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, + i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ @@ -1196,56 +1189,65 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, } /* Fill in the chip specific driver values */ - if (kind == any_chip) - type_name = "lm85"; - else if (kind == lm85b) + switch (kind) { + case lm85b: type_name = "lm85b"; - else if (kind == lm85c) + break; + case lm85c: type_name = "lm85c"; - else if (kind == adm1027) + break; + case adm1027: type_name = "adm1027"; - else if (kind == adt7463) + break; + case adt7463: type_name = "adt7463"; - else if (kind == emc6d100) + break; + case emc6d100: type_name = "emc6d100"; - else if (kind == emc6d102) + break; + case emc6d102: type_name = "emc6d102"; - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + break; + default: + type_name = "lm85"; + } + strlcpy(client->name, type_name, I2C_NAME_SIZE); /* Fill in the remaining client fields */ data->type = kind; - data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(client); + if (err) goto ERROR1; /* Set the VRM version */ data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ - lm85_init_client(new_client); + lm85_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group))) + err = sysfs_create_group(&client->dev.kobj, &lm85_group); + if (err) goto ERROR2; /* The ADT7463 has an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ - data->vid = lm85_read_value(new_client, LM85_REG_VID); + data->vid = lm85_read_value(client, LM85_REG_VID); if (!(kind == adt7463 && (data->vid & 0x80))) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto ERROR3; /* The EMC6D100 has 3 additional voltage inputs */ if (kind == emc6d100) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567))) goto ERROR3; - data->hwmon_dev = hwmon_device_register(&new_client->dev); + data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto ERROR3; @@ -1255,12 +1257,12 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, /* Error out and cleanup code */ ERROR3: - sysfs_remove_group(&new_client->dev.kobj, &lm85_group); - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4); + sysfs_remove_group(&client->dev.kobj, &lm85_group); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in4); if (kind == emc6d100) - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in567); ERROR2: - i2c_detach_client(new_client); + i2c_detach_client(client); ERROR1: kfree(data); ERROR0: @@ -1307,10 +1309,8 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) return res; } -static int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static void lm85_write_value(struct i2c_client *client, u8 reg, int value) { - int res; - switch (reg) { case LM85_REG_FAN(0): /* Write WORD data */ case LM85_REG_FAN(1): @@ -1321,16 +1321,13 @@ static int lm85_write_value(struct i2c_client *client, u8 reg, int value) case LM85_REG_FAN_MIN(2): case LM85_REG_FAN_MIN(3): /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff); - res |= i2c_smbus_write_byte_data(client, reg + 1, - (value >> 8) & 0xff); + i2c_smbus_write_byte_data(client, reg, value & 0xff); + i2c_smbus_write_byte_data(client, reg + 1, value >> 8); break; default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); + i2c_smbus_write_byte_data(client, reg, value); break; } - - return res; } static void lm85_init_client(struct i2c_client *client) @@ -1414,6 +1411,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) for (i = 0; i <= 3; ++i) { data->in[i] = lm85_read_value(client, LM85_REG_IN(i)); + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1421,17 +1420,9 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN(4)); } - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); } @@ -1462,13 +1453,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) EMC6D102_REG_EXTEND_ADC4); data->in_ext[0] = ext3 & 0x0f; data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; + data->in_ext[2] = ext4 >> 4; + data->in_ext[3] = ext3 >> 4; + data->in_ext[4] = ext2 >> 4; data->temp_ext[0] = ext1 & 0x0f; data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; + data->temp_ext[2] = ext1 >> 4; } data->last_reading = jiffies; @@ -1484,6 +1475,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_IN_MIN(i)); data->in_max[i] = lm85_read_value(client, LM85_REG_IN_MAX(i)); + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1502,25 +1495,19 @@ static struct lm85_data *lm85_update_device(struct device *dev) } } - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - for (i = 0; i <= 2; ++i) { + int val; + data->temp_min[i] = lm85_read_value(client, LM85_REG_TEMP_MIN(i)); data->temp_max[i] = lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - for (i = 0; i <= 2; ++i) { - int val; data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); data->autofan[i].freq = val & 0x07; - data->zone[i].range = (val >> 4) & 0x0f; + data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); data->zone[i].limit = @@ -1535,11 +1522,11 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[2].min_off = (i & 0x80) != 0; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i >> 4) & 0x0f; + data->zone[0].hyst = i >> 4; data->zone[1].hyst = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i >> 4) & 0x0f; + data->zone[2].hyst = i >> 4; data->last_config = jiffies; } /* last_config */ @@ -1562,14 +1549,10 @@ static void __exit sm_lm85_exit(void) i2c_del_driver(&lm85_driver); } -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with - * post 2.7.0 CVS changes. - */ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, " "Margit Schubert-While <margitsw@t-online.de>, " - "Justin Thiessen <jthiessen@penguincomputing.com"); + "Justin Thiessen <jthiessen@penguincomputing.com>"); MODULE_DESCRIPTION("LM85-B, LM85-C driver"); module_init(sm_lm85_init); |