Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (43 commits)
  sh: sh775x/titan fixes for irq header changes.
  sh: update r7780rp defconfig.
  sh: compile fixes for header cleanup.
  sh: Fixup pte_mkhuge() build failure.
  sh: set KBUILD_IMAGE to something sensible.
  sh: show held locks in stack trace with lockdep.
  sh: platform_pata support for R7780RP
  sh: stacktrace/lockdep/irqflags tracing support.
  sh: Fixup movli.l/movco.l atomic ops for gcc4.
  sh: dyntick infrastructure.
  sh: Clock framework tidying.
  sh: Turn off IRQs around get_timer_offset() calls.
  sh: Get the PGD right in oops case with 64-bit PTEs.
  sh: Fix store queue bitmap end.
  sh: More flexible + SH7780 earlyprintk SCIF support.
  sh: Fixup various PAGE_SIZE == 4096 assumptions.
  sh: Fixup 4K irq stacks.
  sh: dma-api channel capability extensions.
  sh: Drop name overload in dma-sh.
  sh: Make dma-isa depend on ISA_DMA_API.
  ...

126 files changed, 5650 insertions, 2965 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index bffc7e1..d83d64a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -51,6 +51,14 @@ config GENERIC_TIME
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
+config STACKTRACE_SUPPORT
+	bool
+	default y
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "System type"
@@ -219,6 +227,20 @@ config SH_SHMIN
 	help
 	  Select SHMIN if configuring for the SHMIN board.
 
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+
 config SH_UNKNOWN
 	bool "BareCPU"
 	help
@@ -280,12 +302,20 @@ config CF_BASE_ADDR
 
 menu "Processor features"
 
-config CPU_LITTLE_ENDIAN
-	bool "Little Endian"
+choice
+	prompt "Endianess selection" 
+	default CPU_LITTLE_ENDIAN
 	help
 	  Some SuperH machines can be configured for either little or big
-	  endian byte order. These modes require different kernels. Say Y if
-	  your machine is little endian, N if it's a big endian machine.
+	  endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+	bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+	bool "Big Endian"
+
+endchoice
 
 config SH_FPU
 	bool "FPU support"
@@ -345,6 +375,9 @@ config CPU_HAS_MASKREG_IRQ
 config CPU_HAS_INTC2_IRQ
 	bool
 
+config CPU_HAS_IPR_IRQ
+	bool
+
 config CPU_HAS_SR_RB
 	bool "CPU has SR.RB"
 	depends on CPU_SH3 || CPU_SH4
@@ -357,6 +390,9 @@ config CPU_HAS_SR_RB
 	  See <file:Documentation/sh/register-banks.txt> for further
 	  information on SR.RB and register banking in the kernel in general.
 
+config CPU_HAS_PTEA
+	bool
+
 endmenu
 
 menu "Timer support"
@@ -364,10 +400,25 @@ depends on !GENERIC_TIME
 
 config SH_TMU
 	bool "TMU timer support"
+	depends on CPU_SH3 || CPU_SH4
 	default y
 	help
 	  This enables the use of the TMU as the system timer.
 
+config SH_CMT
+	bool "CMT timer support"
+	depends on CPU_SH2
+	default y
+	help
+	  This enables the use of the CMT as the system timer.
+
+config SH_MTU2
+	bool "MTU2 timer support"
+	depends on CPU_SH2A
+	default n
+	help
+	  This enables the use of the MTU2 as the system timer.
+
 endmenu
 
 source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
@@ -376,19 +427,52 @@ source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
+config SH_TIMER_IRQ
+	int
+	default "28" if CPU_SUBTYPE_SH7780
+	default "86" if CPU_SUBTYPE_SH7619
+	default "140" if CPU_SUBTYPE_SH7206
+	default "16"
+
+config NO_IDLE_HZ
+	bool "Dynamic tick timer"
+	help
+	  Select this option if you want to disable continuous timer ticks
+	  and have them programmed to occur as required. This option saves
+	  power as the system can remain in idle state for longer.
+
+	  By default dynamic tick is disabled during the boot, and can be
+	  manually enabled with:
+
+	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick
+
+	  Alternatively, if you want dynamic tick automatically enabled
+	  during boot, pass "dyntick=enable" via the kernel command string.
+
+	  Please note that dynamic tick may affect the accuracy of
+	  timekeeping on some platforms depending on the implementation.
+
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
+	default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
+	default "31250000" if CPU_SUBTYPE_SH7619
+	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
+			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
+			      CPU_SUBTYPE_SH7206
 	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
 	default "60000000" if CPU_SUBTYPE_SH7751
-	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
-			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705
-	default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	help
 	  This option is used to specify the peripheral clock frequency.
 	  This is necessary for determining the reference clock value on
 	  platforms lacking an RTC.
 
+config SH_CLK_MD
+	int "CPU Mode Pin Setting"
+	depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+	help
+	  MD2 - MD0 Setting.
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
@@ -421,6 +505,8 @@ config HEARTBEAT
 	  behavior is platform-dependent, but normally the flash frequency is
 	  a hyperbolic function of the 5-minute load average.
 
+source "arch/sh/drivers/Kconfig"
+
 endmenu
 
 config ISA_DMA_API
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 48479e0..66a25ef4 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -1,5 +1,9 @@
 menu "Kernel hacking"
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
 source "lib/Kconfig.debug"
 
 config SH_STANDARD_BIOS
@@ -17,7 +21,18 @@ config SH_STANDARD_BIOS
 
 config EARLY_SCIF_CONSOLE
 	bool "Use early SCIF console"
-	depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS
+	help
+	  This enables an early console using a fixed SCIF port. This can
+	  be used by platforms that are either not running the SH
+	  standard BIOS, or do not wish to use the BIOS callbacks for the
+	  serial I/O.
+
+config EARLY_SCIF_CONSOLE_PORT
+	hex "SCIF port for early console"
+	depends on EARLY_SCIF_CONSOLE
+	default "0xffe00000" if CPU_SUBTYPE_SH7780
+	default "0xfffe9800" if CPU_SUBTYPE_SH72060
+	default "0xffe80000" if CPU_SH4
 
 config EARLY_PRINTK
 	bool "Early printk support"
@@ -30,6 +45,11 @@ config EARLY_PRINTK
 	  when the kernel may crash or hang before the serial console is
 	  initialised. If unsure, say N.
 
+	  On devices that are running SH-IPL and want to keep the port
+	  initialization consistent while not using the BIOS callbacks,
+	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
+	  the kernel command line option to toggle back and forth.
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 26d62ff..d10bba5 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -13,10 +13,6 @@
 # for "archclean" and "archdep" for cleaning up and making dependencies for
 # this architecture
 #
-
-cflags-y				:= -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	:= -ml
-
 isa-y					:= any
 isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
@@ -38,13 +34,16 @@ isa-y			:= $(isa-y)-nofpu
 endif
 endif
 
-cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),)
-
-cflags-$(CONFIG_CPU_SH2)		+= -m2
-cflags-$(CONFIG_CPU_SH3)		+= -m3
-cflags-$(CONFIG_CPU_SH4)		+= -m4 \
+cflags-$(CONFIG_CPU_SH2)		:= -m2
+cflags-$(CONFIG_CPU_SH3)		:= -m3
+cflags-$(CONFIG_CPU_SH4)		:= -m4 \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4A)		:= -m4a $(call cc-option,-m4a-nofpu,)
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
+
+cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
 
 cflags-$(CONFIG_SH_DSP)			+= -Wa,-dsp
 cflags-$(CONFIG_SH_KGDB)		+= -g
@@ -59,7 +58,9 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .comment -R .stab -R .stabstr -S
 # never be used by anyone. Use a board-specific defconfig that has a
 # reasonable chance of being current instead.
 #
-KBUILD_DEFCONFIG := rts7751r2d_defconfig
+KBUILD_DEFCONFIG := r7780rp_defconfig
+
+KBUILD_IMAGE	:= arch/sh/boot/zImage
 
 #
 # Choosing incompatible machines durings configuration will result in
@@ -109,6 +110,8 @@ machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			:= landisk
 machdir-$(CONFIG_SH_TITAN)			:= titan
 machdir-$(CONFIG_SH_SHMIN)			:= shmin
+machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= se/7206
+machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= se/7619
 machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
 
 incdir-y			:= $(notdir $(machdir-y))
@@ -124,6 +127,7 @@ core-$(CONFIG_HD64465)		+= arch/sh/cchips/hd6446x/hd64465/
 core-$(CONFIG_VOYAGERGX)	+= arch/sh/cchips/voyagergx/
 
 cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
 cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
 cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
 
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index f1776d0..574b031 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -3,4 +3,6 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT)	+= led.o
+
+obj-$(CONFIG_HEARTBEAT)		+= led.o
+obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
index aa15ec5..cc381e1 100644
--- a/arch/sh/boards/renesas/r7780rp/irq.c
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -10,6 +10,7 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/r7780rp.h>
 
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c
new file mode 100644
index 0000000..c844dfa
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/mach/r7780rp.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = ctrl_inw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	ctrl_outw(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index c331cae..9f89c8d 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -44,8 +44,37 @@ static struct platform_device m66596_usb_host_device = {
 	.resource	= m66596_usb_host_resources,
 };
 
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= 0x1f0,
+		.end	= 0x1f0 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= 0x1f0 + 0x206,
+		.end	= 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+#ifdef CONFIG_SH_R7780MP
+		.start	= 1,
+#else
+		.start	= 4,
+#endif
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
 static struct platform_device *r7780rp_devices[] __initdata = {
 	&m66596_usb_host_device,
+	&cf_ide_device,
 };
 
 static int __init r7780rp_devices_setup(void)
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile
new file mode 100644
index 0000000..63950f4f
--- /dev/null
+++ b/arch/sh/boards/se/7206/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the 7206 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
+
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
new file mode 100644
index 0000000..b557273
--- /dev/null
+++ b/arch/sh/boards/se/7206/io.c
@@ -0,0 +1,123 @@
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+ *
+ * linux/arch/sh/boards/se/7206/io.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7206 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/se7206.h>
+
+
+static inline void delay(void)
+{
+	ctrl_inw(0x20000000);  /* P2 ROM Area */
+}
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x300 || port < 0x310)
+		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+}
+
+unsigned char se7206_inb(unsigned long port)
+{
+	return (*port2adr(port))&0xff; 
+}
+
+unsigned char se7206_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	v = (*port2adr(port))&0xff; 
+	delay();
+	return v;
+}
+
+unsigned short se7206_inw(unsigned long port)
+{
+	return *port2adr(port);;
+}
+
+unsigned int se7206_inl(unsigned long port)
+{
+	maybebadio(port);
+	return 0;
+}
+
+void se7206_outb(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+}
+
+void se7206_outb_p(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+	delay();
+}
+
+void se7206_outw(unsigned short value, unsigned long port)
+{
+	*port2adr(port) = value;
+}
+
+void se7206_outl(unsigned int value, unsigned long port)
+{
+	maybebadio(port);
+}
+
+void se7206_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+	while (count--)
+		*p = *ap++;
+}
+
+void se7206_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
new file mode 100644
index 0000000..3fb0c5f
--- /dev/null
+++ b/arch/sh/boards/se/7206/irq.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+static void disable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inw(INTC_IPR01);
+	val &= mask;
+	ctrl_outw(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ2_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inw(INTC_IPR01);
+	val |= value;
+	ctrl_outw(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ2_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(unsigned int irq)
+{
+	unsigned short sts0,sts1;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_se7206_irq(irq);
+	/* FPGA isr clear */
+	sts0 = ctrl_inw(INTSTS0);
+	sts1 = ctrl_inw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ2_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(sts0, INTSTS0);
+	ctrl_outw(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA-IRQ",
+	.mask		= disable_se7206_irq,
+	.unmask		= enable_se7206_irq,
+	.mask_ack	= disable_se7206_irq,
+	.eoi		= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	/* FPGA System register setup*/
+	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
+	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	ctrl_outw(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c
new file mode 100644
index 0000000..ef79460
--- /dev/null
+++ b/arch/sh/boards/se/7206/led.c
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/sh/kernel/led_se.c
+ *
+ * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file contains Solution Engine specific LED code.
+ */
+
+#include <linux/config.h>
+#include <asm/se7206.h>
+
+#ifdef CONFIG_HEARTBEAT
+
+#include <linux/sched.h>
+
+/* Cycle the LED's in the clasic Knightrider/Sun pattern */
+void heartbeat_se(void)
+{
+	static unsigned int cnt = 0, period = 0;
+	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
+	static unsigned bit = 0, up = 1;
+
+	cnt += 1;
+	if (cnt < period) {
+		return;
+	}
+
+	cnt = 0;
+
+	/* Go through the points (roughly!):
+	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
+	 */
+	period = 110 - ( (300<<FSHIFT)/
+			 ((avenrun[0]/5) + (3<<FSHIFT)) );
+
+	if (up) {
+		if (bit == 7) {
+			bit--;
+			up=0;
+		} else {
+			bit ++;
+		}
+	} else {
+		if (bit == 0) {
+			bit++;
+			up=1;
+		} else {
+			bit--;
+		}
+	}
+	*p = 1<<(bit+8);
+
+}
+#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
new file mode 100644
index 0000000..0f42e91
--- /dev/null
+++ b/arch/sh/boards/se/7206/setup.c
@@ -0,0 +1,79 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x300,
+		.end		= 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_device_register(&smc91x_device);
+}
+
+__initcall(se7206_devices_setup);
+
+void heartbeat_se(void);
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_nr_irqs		= 256,
+	.mv_inb			= se7206_inb,
+	.mv_inw			= se7206_inw,
+	.mv_inl			= se7206_inl,
+	.mv_outb		= se7206_outb,
+	.mv_outw		= se7206_outw,
+	.mv_outl		= se7206_outl,
+
+	.mv_inb_p		= se7206_inb_p,
+	.mv_inw_p		= se7206_inw,
+	.mv_inl_p		= se7206_inl,
+	.mv_outb_p		= se7206_outb_p,
+	.mv_outw_p		= se7206_outw,
+	.mv_outl_p		= se7206_outl,
+
+	.mv_insb		= se7206_insb,
+	.mv_insw		= se7206_insw,
+	.mv_insl		= se7206_insl,
+	.mv_outsb		= se7206_outsb,
+	.mv_outsw		= se7206_outsw,
+	.mv_outsl		= se7206_outsl,
+
+	.mv_init_irq		= init_se7206_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_se,
+#endif
+};
+ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
new file mode 100644
index 0000000..3666eca
--- /dev/null
+++ b/arch/sh/boards/se/7619/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7619 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c
new file mode 100644
index 0000000..176f1f39c
--- /dev/null
+++ b/arch/sh/boards/se/7619/io.c
@@ -0,0 +1,102 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7619/io.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7619 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/se7619.h>
+#include <asm/irq.h>
+
+/* FIXME: M3A-ZAB7 Compact Flash Slot support */
+
+static inline void delay(void)
+{
+	ctrl_inw(0xa0000000);	/* Uncached ROM area (P2) */
+}
+
+#define badio(name,port) \
+  printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
+	 #name, (port), (__u32) __builtin_return_address(0))
+
+unsigned char se7619___inb(unsigned long port)
+{
+	badio(inb, port);
+	return 0;
+}
+
+unsigned char se7619___inb_p(unsigned long port)
+{
+	badio(inb_p, port);
+	delay();
+	return 0;
+}
+
+unsigned short se7619___inw(unsigned long port)
+{
+	badio(inw, port);
+	return 0;
+}
+
+unsigned int se7619___inl(unsigned long port)
+{
+	badio(inl, port);
+	return 0;
+}
+
+void se7619___outb(unsigned char value, unsigned long port)
+{
+	badio(outb, port);
+}
+
+void se7619___outb_p(unsigned char value, unsigned long port)
+{
+	badio(outb_p, port);
+	delay();
+}
+
+void se7619___outw(unsigned short value, unsigned long port)
+{
+	badio(outw, port);
+}
+
+void se7619___outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void se7619___insb(unsigned long port, void *addr, unsigned long count)
+{
+	badio(inw, port);
+}
+
+void se7619___insw(unsigned long port, void *addr, unsigned long count)
+{
+	badio(inw, port);
+}
+
+void se7619___insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void se7619___outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void se7619___outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void se7619___outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c
new file mode 100644
index 0000000..e627b26
--- /dev/null
+++ b/arch/sh/boards/se/7619/setup.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/boards/se/7619/setup.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * Hitachi SH7619 SolutionEngine Support.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/se7619.h>
+#include <asm/machvec.h>
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_nr_irqs		= 108,
+	.mv_inb			= se7619___inb,
+	.mv_inw			= se7619___inw,
+	.mv_inl			= se7619___inl,
+	.mv_outb		= se7619___outb,
+	.mv_outw		= se7619___outw,
+	.mv_outl		= se7619___outl,
+
+	.mv_inb_p		= se7619___inb_p,
+	.mv_inw_p		= se7619___inw,
+	.mv_inl_p		= se7619___inl,
+	.mv_outb_p		= se7619___outb_p,
+	.mv_outw_p		= se7619___outw,
+	.mv_outl_p		= se7619___outl,
+
+	.mv_insb		= se7619___insb,
+	.mv_insw		= se7619___insw,
+	.mv_insl		= se7619___insl,
+	.mv_outsb		= se7619___outsb,
+	.mv_outsw		= se7619___outsw,
+	.mv_outsl		= se7619___outsl,
+};
+ALIAS_MV(se)
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index a6046d9..6bcd939 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -1,26 +1,30 @@
 /*
- *	Setup for Titan
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
 #include <linux/init.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
 #include <asm/titan.h>
 #include <asm/io.h>
 
-extern void __init pcibios_init_platform(void);
-
 static struct ipr_data titan_ipr_map[] = {
-	{ TITAN_IRQ_WAN,	IRL0_IPR_ADDR,	IRL0_IPR_POS,	IRL0_PRIORITY },
-	{ TITAN_IRQ_LAN,	IRL1_IPR_ADDR,	IRL1_IPR_POS,	IRL1_PRIORITY },
-	{ TITAN_IRQ_MPCIA,	IRL2_IPR_ADDR,	IRL2_IPR_POS,	IRL2_PRIORITY },
-	{ TITAN_IRQ_USB,	IRL3_IPR_ADDR,	IRL3_IPR_POS,	IRL3_PRIORITY },
+	/* IRQ, IPR idx, shift, prio */
+	{ TITAN_IRQ_WAN,   3, 12, 8 },	/* eth0 (WAN) */
+	{ TITAN_IRQ_LAN,   3,  8, 8 },	/* eth1 (LAN) */
+	{ TITAN_IRQ_MPCIA, 3,  4, 8 },	/* mPCI A (top) */
+	{ TITAN_IRQ_USB,   3,  0, 8 },	/* mPCI B (bottom), USB */
 };
 
 static void __init init_titan_irq(void)
 {
 	/* enable individual interrupt mode for externals */
-	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-
+	ipr_irq_enable_irlm();
+	/* register ipr irqs */
 	make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
 }
 
@@ -47,6 +51,5 @@ struct sh_machine_vector mv_titan __initmv = {
 	.mv_ioport_map = titan_ioport_map,
 
 	.mv_init_irq =	init_titan_irq,
-	.mv_init_pci =	pcibios_init_platform,
 };
 ALIAS_MV(titan)
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index f2fed5c..35452d8 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -12,6 +12,7 @@
  */
 
 #include <asm/uaccess.h>
+#include <asm/addrspace.h>
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
 #endif
@@ -228,7 +229,7 @@ long* stack_start = &user_stack[STACK_SIZE];
 void decompress_kernel(void)
 {
 	output_data = 0;
-	output_ptr = (unsigned long)&_text+0x20001000;
+	output_ptr = P2SEGADDR((unsigned long)&_text+0x1000);
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig
index 34e2046..2b75b48 100644
--- a/arch/sh/configs/r7780rp_defconfig
+++ b/arch/sh/configs/r7780rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3
-# Tue Oct 31 12:32:06 2006
+# Linux kernel version: 2.6.19
+# Wed Dec  6 11:59:38 2006
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -11,6 +11,8 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -37,6 +39,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -118,6 +121,8 @@ CONFIG_SH_R7780RP=y
 # CONFIG_SH_LANDISK is not set
 # CONFIG_SH_TITAN is not set
 # CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
 # CONFIG_SH_UNKNOWN is not set
 
 #
@@ -130,6 +135,12 @@ CONFIG_CPU_SH4A=y
 # SH-2 Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
 
 #
 # SH-3 Processor Support
@@ -165,6 +176,7 @@ CONFIG_CPU_SH4A=y
 #
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
 
 #
 # SH4AL-DSP Processor Support
@@ -181,8 +193,14 @@ CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 # CONFIG_32BIT is not set
 CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -204,12 +222,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 # CONFIG_SH_DSP is not set
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_INTC2_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
 
 #
 # Timer support
@@ -220,6 +240,8 @@ CONFIG_SH_TMU=y
 # R7780RP options
 #
 CONFIG_SH_R7780MP=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_NO_IDLE_HZ=y
 CONFIG_SH_PCLK_FREQ=32000000
 
 #
@@ -238,13 +260,18 @@ CONFIG_SH_PCLK_FREQ=32000000
 # CONFIG_HD6446X_SERIES is not set
 
 #
+# Additional SuperH Device Drivers
+#
+CONFIG_PUSH_SWITCH=y
+
+#
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -278,10 +305,7 @@ CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 #
 # PCI Hotplug Support
 #
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -341,6 +365,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
@@ -572,6 +598,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
 
 #
 # Multi-device support (RAID and LVM)
@@ -688,6 +715,7 @@ CONFIG_R8169=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -830,10 +858,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -1020,7 +1044,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1052,7 +1076,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1153,28 +1177,33 @@ CONFIG_NLS_ISO8859_1=y
 #
 # Profiling support
 #
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
@@ -1184,7 +1213,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_KGDB is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
new file mode 100644
index 0000000..36cec0b
--- /dev/null
+++ b/arch/sh/configs/se7206_defconfig
@@ -0,0 +1,826 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc4
+# Sun Nov  5 16:20:10 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+CONFIG_SH_7206_SOLUTION_ENGINE=y
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+CONFIG_CPU_SUBTYPE_SH7206=y
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+
+#
+# Memory management options
+#
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+
+#
+# Timer support
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_MD=6
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
new file mode 100644
index 0000000..c54c758
--- /dev/null
+++ b/arch/sh/drivers/Kconfig
@@ -0,0 +1,9 @@
+menu "Additional SuperH Device Drivers"
+
+config PUSH_SWITCH
+	tristate "Push switch support"
+	help
+	  This enables support for the push switch framework, a simple
+	  framework that allows for sysfs driven switch status reporting.
+
+endmenu
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index 338c372..bf18dbf 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -5,4 +5,4 @@
 obj-$(CONFIG_PCI)		+= pci/
 obj-$(CONFIG_SH_DMA)		+= dma/
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
-
+obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
index 065d4c9..db1295d 100644
--- a/arch/sh/drivers/dma/Makefile
+++ b/arch/sh/drivers/dma/Makefile
@@ -2,8 +2,8 @@
 # Makefile for the SuperH DMA specific kernel interface routines under Linux.
 #
 
-obj-y				+= dma-api.o dma-isa.o
+obj-y				+= dma-api.o
+obj-$(CONFIG_ISA_DMA_API)	+= dma-isa.o
 obj-$(CONFIG_SYSFS)		+= dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
 obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
-
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
index 47c3e83..e062067 100644
--- a/arch/sh/drivers/dma/dma-api.c
+++ b/arch/sh/drivers/dma/dma-api.c
@@ -11,61 +11,27 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/proc_fs.h>
 #include <linux/list.h>
 #include <linux/platform_device.h>
+#include <linux/mm.h>
 #include <asm/dma.h>
 
 DEFINE_SPINLOCK(dma_spin_lock);
 static LIST_HEAD(registered_dmac_list);
 
-/*
- * A brief note about the reasons for this API as it stands.
- *
- * For starters, the old ISA DMA API didn't work for us for a number of
- * reasons, for one, the vast majority of channels on the SH DMAC are
- * dual-address mode only, and both the new and the old DMA APIs are after the
- * concept of managing a DMA buffer, which doesn't overly fit this model very
- * well. In addition to which, the new API is largely geared at IOMMUs and
- * GARTs, and doesn't even support the channel notion very well.
- *
- * The other thing that's a marginal issue, is the sheer number of random DMA
- * engines that are present (ie, in boards like the Dreamcast), some of which
- * cascade off of the SH DMAC, and others do not. As such, there was a real
- * need for a scalable subsystem that could deal with both single and
- * dual-address mode usage, in addition to interoperating with cascaded DMACs.
- *
- * There really isn't any reason why this needs to be SH specific, though I'm
- * not aware of too many other processors (with the exception of some MIPS)
- * that have the same concept of a dual address mode, or any real desire to
- * actually make use of the DMAC even if such a subsystem were exposed
- * elsewhere.
- *
- * The idea for this was derived from the ARM port, which acted as an excellent
- * reference when trying to address these issues.
- *
- * It should also be noted that the decision to add Yet Another DMA API(tm) to
- * the kernel wasn't made easily, and was only decided upon after conferring
- * with jejb with regards to the state of the old and new APIs as they applied
- * to these circumstances. Philip Blundell was also a great help in figuring
- * out some single-address mode DMA semantics that were otherwise rather
- * confusing.
- */
-
 struct dma_info *get_dma_info(unsigned int chan)
 {
 	struct dma_info *info;
-	unsigned int total = 0;
 
 	/*
 	 * Look for each DMAC's range to determine who the owner of
 	 * the channel is.
 	 */
 	list_for_each_entry(info, &registered_dmac_list, list) {
-		total += info->nr_channels;
-		if (chan > total)
+		if ((chan <  info->first_channel_nr) ||
+		    (chan >= info->first_channel_nr + info->nr_channels))
 			continue;
 
 		return info;
@@ -73,6 +39,22 @@ struct dma_info *get_dma_info(unsigned int chan)
 
 	return NULL;
 }
+EXPORT_SYMBOL(get_dma_info);
+
+struct dma_info *get_dma_info_by_name(const char *dmac_name)
+{
+	struct dma_info *info;
+
+	list_for_each_entry(info, &registered_dmac_list, list) {
+		if (dmac_name && (strcmp(dmac_name, info->name) != 0))
+			continue;
+		else
+			return info;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(get_dma_info_by_name);
 
 static unsigned int get_nr_channels(void)
 {
@@ -91,63 +73,161 @@ static unsigned int get_nr_channels(void)
 struct dma_channel *get_dma_channel(unsigned int chan)
 {
 	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel;
+	int i;
 
-	if (!info)
+	if (unlikely(!info))
 		return ERR_PTR(-EINVAL);
 
-	return info->channels + chan;
+	for (i = 0; i < info->nr_channels; i++) {
+		channel = &info->channels[i];
+		if (channel->chan == chan)
+			return channel;
+	}
+
+	return NULL;
 }
+EXPORT_SYMBOL(get_dma_channel);
 
 int get_dma_residue(unsigned int chan)
 {
 	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	struct dma_channel *channel = get_dma_channel(chan);
 
 	if (info->ops->get_residue)
 		return info->ops->get_residue(channel);
 
 	return 0;
 }
+EXPORT_SYMBOL(get_dma_residue);
 
-int request_dma(unsigned int chan, const char *dev_id)
+static int search_cap(const char **haystack, const char *needle)
 {
-	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	const char **p;
+
+	for (p = haystack; *p; p++)
+		if (strcmp(*p, needle) == 0)
+			return 1;
+
+	return 0;
+}
+
+/**
+ * request_dma_bycap - Allocate a DMA channel based on its capabilities
+ * @dmac: List of DMA controllers to search
+ * @caps: List of capabilites
+ *
+ * Search all channels of all DMA controllers to find a channel which
+ * matches the requested capabilities. The result is the channel
+ * number if a match is found, or %-ENODEV if no match is found.
+ *
+ * Note that not all DMA controllers export capabilities, in which
+ * case they can never be allocated using this API, and so
+ * request_dma() must be used specifying the channel number.
+ */
+int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
+{
+	unsigned int found = 0;
+	struct dma_info *info;
+	const char **p;
+	int i;
+
+	BUG_ON(!dmac || !caps);
+
+	list_for_each_entry(info, &registered_dmac_list, list)
+		if (strcmp(*dmac, info->name) == 0) {
+			found = 1;
+			break;
+		}
+
+	if (!found)
+		return -ENODEV;
+
+	for (i = 0; i < info->nr_channels; i++) {
+		struct dma_channel *channel = &info->channels[i];
+
+		if (unlikely(!channel->caps))
+			continue;
+
+		for (p = caps; *p; p++) {
+			if (!search_cap(channel->caps, *p))
+				break;
+			if (request_dma(channel->chan, dev_id) == 0)
+				return channel->chan;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(request_dma_bycap);
+
+int dmac_search_free_channel(const char *dev_id)
+{
+	struct dma_channel *channel = { 0 };
+	struct dma_info *info = get_dma_info(0);
+	int i;
+
+	for (i = 0; i < info->nr_channels; i++) {
+		channel = &info->channels[i];
+		if (unlikely(!channel))
+			return -ENODEV;
+
+		if (atomic_read(&channel->busy) == 0)
+			break;
+	}
 
-	down(&channel->sem);
+	if (info->ops->request) {
+		int result = info->ops->request(channel);
+		if (result)
+			return result;
 
-	if (!info->ops || chan >= MAX_DMA_CHANNELS) {
-		up(&channel->sem);
-		return -EINVAL;
+		atomic_set(&channel->busy, 1);
+		return channel->chan;
 	}
 
-	atomic_set(&channel->busy, 1);
+	return -ENOSYS;
+}
+
+int request_dma(unsigned int chan, const char *dev_id)
+{
+	struct dma_channel *channel = { 0 };
+	struct dma_info *info = get_dma_info(chan);
+	int result;
+
+	channel = get_dma_channel(chan);
+	if (atomic_xchg(&channel->busy, 1))
+		return -EBUSY;
 
 	strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
 
-	up(&channel->sem);
+	if (info->ops->request) {
+		result = info->ops->request(channel);
+		if (result)
+			atomic_set(&channel->busy, 0);
 
-	if (info->ops->request)
-		return info->ops->request(channel);
+		return result;
+	}
 
 	return 0;
 }
+EXPORT_SYMBOL(request_dma);
 
 void free_dma(unsigned int chan)
 {
 	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	struct dma_channel *channel = get_dma_channel(chan);
 
 	if (info->ops->free)
 		info->ops->free(channel);
 
 	atomic_set(&channel->busy, 0);
 }
+EXPORT_SYMBOL(free_dma);
 
 void dma_wait_for_completion(unsigned int chan)
 {
 	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	struct dma_channel *channel = get_dma_channel(chan);
 
 	if (channel->flags & DMA_TEI_CAPABLE) {
 		wait_event(channel->wait_queue,
@@ -158,21 +238,52 @@ void dma_wait_for_completion(unsigned int chan)
 	while (info->ops->get_residue(channel))
 		cpu_relax();
 }
+EXPORT_SYMBOL(dma_wait_for_completion);
+
+int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
+{
+	struct dma_info *info;
+	unsigned int found = 0;
+	int i;
+
+	list_for_each_entry(info, &registered_dmac_list, list)
+		if (strcmp(dmac, info->name) == 0) {
+			found = 1;
+			break;
+		}
+
+	if (unlikely(!found))
+		return -ENODEV;
+
+	for (i = 0; i < info->nr_channels; i++, caps++) {
+		struct dma_channel *channel;
+
+		if ((info->first_channel_nr + i) != caps->ch_num)
+			return -EINVAL;
+
+		channel = &info->channels[i];
+		channel->caps = caps->caplist;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(register_chan_caps);
 
 void dma_configure_channel(unsigned int chan, unsigned long flags)
 {
 	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	struct dma_channel *channel = get_dma_channel(chan);
 
 	if (info->ops->configure)
 		info->ops->configure(channel, flags);
 }
+EXPORT_SYMBOL(dma_configure_channel);
 
 int dma_xfer(unsigned int chan, unsigned long from,
 	     unsigned long to, size_t size, unsigned int mode)
 {
 	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
+	struct dma_channel *channel = get_dma_channel(chan);
 
 	channel->sar	= from;
 	channel->dar	= to;
@@ -181,8 +292,20 @@ int dma_xfer(unsigned int chan, unsigned long from,
 
 	return info->ops->xfer(channel);
 }
+EXPORT_SYMBOL(dma_xfer);
+
+int dma_extend(unsigned int chan, unsigned long op, void *param)
+{
+	struct dma_info *info = get_dma_info(chan);
+	struct dma_channel *channel = get_dma_channel(chan);
+
+	if (info->ops->extend)
+		return info->ops->extend(channel, op, param);
+
+	return -ENOSYS;
+}
+EXPORT_SYMBOL(dma_extend);
 
-#ifdef CONFIG_PROC_FS
 static int dma_read_proc(char *buf, char **start, off_t off,
 			 int len, int *eof, void *data)
 {
@@ -214,8 +337,6 @@ static int dma_read_proc(char *buf, char **start, off_t off,
 
 	return p - buf;
 }
-#endif
-
 
 int register_dmac(struct dma_info *info)
 {
@@ -224,8 +345,7 @@ int register_dmac(struct dma_info *info)
 	INIT_LIST_HEAD(&info->list);
 
 	printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
-	       info->name, info->nr_channels,
-	       info->nr_channels > 1 ? "s" : "");
+	       info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
 
 	BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
 
@@ -242,28 +362,26 @@ int register_dmac(struct dma_info *info)
 
 		size = sizeof(struct dma_channel) * info->nr_channels;
 
-		info->channels = kmalloc(size, GFP_KERNEL);
+		info->channels = kzalloc(size, GFP_KERNEL);
 		if (!info->channels)
 			return -ENOMEM;
-
-		memset(info->channels, 0, size);
 	}
 
 	total_channels = get_nr_channels();
 	for (i = 0; i < info->nr_channels; i++) {
-		struct dma_channel *chan = info->channels + i;
+		struct dma_channel *chan = &info->channels[i];
+
+		atomic_set(&chan->busy, 0);
 
-		chan->chan = i;
-		chan->vchan = i + total_channels;
+		chan->chan  = info->first_channel_nr + i;
+		chan->vchan = info->first_channel_nr + i + total_channels;
 
 		memcpy(chan->dev_id, "Unused", 7);
 
 		if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
 			chan->flags |= DMA_TEI_CAPABLE;
 
-		init_MUTEX(&chan->sem);
 		init_waitqueue_head(&chan->wait_queue);
-
 		dma_create_sysfs_files(chan, info);
 	}
 
@@ -271,6 +389,7 @@ int register_dmac(struct dma_info *info)
 
 	return 0;
 }
+EXPORT_SYMBOL(register_dmac);
 
 void unregister_dmac(struct dma_info *info)
 {
@@ -285,31 +404,16 @@ void unregister_dmac(struct dma_info *info)
 	list_del(&info->list);
 	platform_device_unregister(info->pdev);
 }
+EXPORT_SYMBOL(unregister_dmac);
 
 static int __init dma_api_init(void)
 {
-	printk("DMA: Registering DMA API.\n");
-
-#ifdef CONFIG_PROC_FS
+	printk(KERN_NOTICE "DMA: Registering DMA API.\n");
 	create_proc_read_entry("dma", 0, 0, dma_read_proc, 0);
-#endif
-
 	return 0;
 }
-
 subsys_initcall(dma_api_init);
 
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
 MODULE_DESCRIPTION("DMA API for SuperH");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(request_dma);
-EXPORT_SYMBOL(free_dma);
-EXPORT_SYMBOL(register_dmac);
-EXPORT_SYMBOL(get_dma_residue);
-EXPORT_SYMBOL(get_dma_info);
-EXPORT_SYMBOL(get_dma_channel);
-EXPORT_SYMBOL(dma_xfer);
-EXPORT_SYMBOL(dma_wait_for_completion);
-EXPORT_SYMBOL(dma_configure_channel);
-
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 6607860..f63721e 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -94,20 +94,13 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 	if (unlikely(!chan->flags & DMA_TEI_CAPABLE))
 		return 0;
 
-	chan->name = kzalloc(32, GFP_KERNEL);
-	if (unlikely(chan->name == NULL))
-		return -ENOMEM;
-	snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)",
-		 chan->chan);
-
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, chan->name, chan);
+			   IRQF_DISABLED, chan->dev_id, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
 {
 	free_irq(get_dmte_irq(chan->chan), chan);
-	kfree(chan->name);
 }
 
 static void
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 29b8ef9..eebcd47 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -3,7 +3,7 @@
  *
  * sysfs interface for SH DMA API
  *
- * Copyright (C) 2004, 2005  Paul Mundt
+ * Copyright (C) 2004 - 2006  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -21,7 +21,6 @@
 static struct sysdev_class dma_sysclass = {
 	set_kset_name("dma"),
 };
-
 EXPORT_SYMBOL(dma_sysclass);
 
 static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
@@ -31,7 +30,10 @@ static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
 
 	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
 		struct dma_info *info = get_dma_info(i);
-		struct dma_channel *channel = &info->channels[i];
+		struct dma_channel *channel = get_dma_channel(i);
+
+		if (unlikely(!info) || !channel)
+			continue;
 
 		len += sprintf(buf + len, "%2d: %14s    %s\n",
 			       channel->chan, info->name,
@@ -125,11 +127,16 @@ int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
 	if (ret)
 		return ret;
 
-	sysdev_create_file(dev, &attr_dev_id);
-	sysdev_create_file(dev, &attr_count);
-	sysdev_create_file(dev, &attr_mode);
-	sysdev_create_file(dev, &attr_flags);
-	sysdev_create_file(dev, &attr_config);
+	ret |= sysdev_create_file(dev, &attr_dev_id);
+	ret |= sysdev_create_file(dev, &attr_count);
+	ret |= sysdev_create_file(dev, &attr_mode);
+	ret |= sysdev_create_file(dev, &attr_flags);
+	ret |= sysdev_create_file(dev, &attr_config);
+
+	if (unlikely(ret)) {
+		dev_err(&info->pdev->dev, "Failed creating attrs\n");
+		return ret;
+	}
 
 	snprintf(name, sizeof(name), "dma%d", chan->chan);
 	return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
index cd56d53..ac8ee23 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -15,25 +15,21 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/titan.h>
 #include "pci-sh4.h"
 
+static char titan_irq_tab[] __initdata = {
+	TITAN_IRQ_WAN,
+	TITAN_IRQ_LAN,
+	TITAN_IRQ_MPCIA,
+	TITAN_IRQ_MPCIB,
+	TITAN_IRQ_USB,
+};
+
 int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-	int irq = -1;
-
-	switch (slot) {
-	case 0: irq = TITAN_IRQ_WAN;   break;	/* eth0 (WAN) */
-	case 1: irq = TITAN_IRQ_LAN;   break;	/* eth1 (LAN) */
-	case 2: irq = TITAN_IRQ_MPCIA; break;	/* mPCI A */
-	case 3: irq = TITAN_IRQ_MPCIB; break;	/* mPCI B */
-	case 4: irq = TITAN_IRQ_USB;   break;	/* USB */
-	default:
-		printk(KERN_INFO "PCI: Bad IRQ mapping "
-				 "request for slot %d\n", slot);
-		return -1;
-	}
+	int irq = titan_irq_tab[slot];
 
 	printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
 		slot, pin - 1 + 'A', irq);
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index d6e6352..602b644 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -22,6 +22,20 @@
 #include <linux/delay.h>
 #include "pci-sh4.h"
 
+#define INTC_BASE	0xffd00000
+#define INTC_ICR0	(INTC_BASE+0x0)
+#define INTC_ICR1	(INTC_BASE+0x1c)
+#define INTC_INTPRI	(INTC_BASE+0x10)
+#define INTC_INTREQ	(INTC_BASE+0x24)
+#define INTC_INTMSK0	(INTC_BASE+0x44)
+#define INTC_INTMSK1	(INTC_BASE+0x48)
+#define INTC_INTMSK2	(INTC_BASE+0x40080)
+#define INTC_INTMSKCLR0	(INTC_BASE+0x64)
+#define INTC_INTMSKCLR1	(INTC_BASE+0x68)
+#define INTC_INTMSKCLR2	(INTC_BASE+0x40084)
+#define INTC_INT2MSKR	(INTC_BASE+0x40038)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003c)
+
 /*
  * Initialization. Try all known PCI access methods. Note that we support
  * using both PCI BIOS and direct access: in such cases, we use I/O ports
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
new file mode 100644
index 0000000..f2b9157
--- /dev/null
+++ b/arch/sh/drivers/push-switch.c
@@ -0,0 +1,138 @@
+/*
+ * Generic push-switch framework
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/push-switch.h>
+
+#define DRV_NAME "push-switch"
+#define DRV_VERSION "0.1.0"
+
+static ssize_t switch_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct push_switch_platform_info *psw_info = dev->platform_data;
+	return sprintf(buf, "%s\n", psw_info->name);
+}
+static DEVICE_ATTR(switch, S_IRUGO, switch_show, NULL);
+
+static void switch_timer(unsigned long data)
+{
+	struct push_switch *psw = (struct push_switch *)data;
+
+	schedule_work(&psw->work);
+}
+
+static void switch_work_handler(void *data)
+{
+	struct platform_device *pdev = data;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+
+	psw->state = 0;
+
+	kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE);
+}
+
+static int switch_drv_probe(struct platform_device *pdev)
+{
+	struct push_switch_platform_info *psw_info;
+	struct push_switch *psw;
+	int ret, irq;
+
+	psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL);
+	if (unlikely(!psw))
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (unlikely(irq < 0)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	psw_info = pdev->dev.platform_data;
+	BUG_ON(!psw_info);
+
+	ret = request_irq(irq, psw_info->irq_handler,
+			  IRQF_DISABLED | psw_info->irq_flags,
+			  psw_info->name ? psw_info->name : DRV_NAME, pdev);
+	if (unlikely(ret < 0))
+		goto err;
+
+	if (psw_info->name) {
+		ret = device_create_file(&pdev->dev, &dev_attr_switch);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev, "Failed creating device attrs\n");
+			ret = -EINVAL;
+			goto err_irq;
+		}
+	}
+
+	INIT_WORK(&psw->work, switch_work_handler, pdev);
+	init_timer(&psw->debounce);
+
+	psw->debounce.function = switch_timer;
+	psw->debounce.data = (unsigned long)psw;
+
+	platform_set_drvdata(pdev, psw);
+
+	return 0;
+
+err_irq:
+	free_irq(irq, pdev);
+err:
+	kfree(psw);
+	return ret;
+}
+
+static int switch_drv_remove(struct platform_device *pdev)
+{
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	int irq = platform_get_irq(pdev, 0);
+
+	if (psw_info->name)
+		device_remove_file(&pdev->dev, &dev_attr_switch);
+
+	platform_set_drvdata(pdev, NULL);
+	flush_scheduled_work();
+	del_timer_sync(&psw->debounce);
+	free_irq(irq, pdev);
+
+	kfree(psw);
+
+	return 0;
+}
+
+static struct platform_driver switch_driver = {
+	.probe		= switch_drv_probe,
+	.remove		= switch_drv_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init switch_init(void)
+{
+	printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
+	return platform_driver_register(&switch_driver);
+}
+
+static void __exit switch_exit(void)
+{
+	platform_driver_unregister(&switch_driver);
+}
+module_init(switch_init);
+module_exit(switch_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Paul Mundt");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 5da88a4..99c7e52 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -4,7 +4,7 @@
 
 extra-y	:= head.o init_task.o vmlinux.lds
 
-obj-y	:= process.o signal.o entry.o traps.o irq.o \
+obj-y	:= process.o signal.o traps.o irq.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
 	io.o io_generic.o sh_ksyms.o syscalls.o
 
@@ -21,3 +21,4 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index fb5dac0..0582e67 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -2,11 +2,12 @@
 # Makefile for the Linux/SuperH CPU-specifc backends.
 #
 
-obj-y	+= irq/ init.o clock.o
-
-obj-$(CONFIG_CPU_SH2)		+= sh2/
-obj-$(CONFIG_CPU_SH3)		+= sh3/
-obj-$(CONFIG_CPU_SH4)		+= sh4/
+obj-$(CONFIG_CPU_SH2)		= sh2/
+obj-$(CONFIG_CPU_SH2A)		= sh2a/
+obj-$(CONFIG_CPU_SH3)		= sh3/
+obj-$(CONFIG_CPU_SH4)		= sh4/
 
 obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
+
+obj-y	+= irq/ init.o clock.o
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 51ec64c..abb586b1 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -5,9 +5,11 @@
  *
  * This clock framework is derived from the OMAP version by:
  *
- *	Copyright (C) 2004 Nokia Corporation
+ *	Copyright (C) 2004 - 2005 Nokia Corporation
  *	Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
+ *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -20,6 +22,7 @@
 #include <linux/kref.h>
 #include <linux/seq_file.h>
 #include <linux/err.h>
+#include <linux/platform_device.h>
 #include <asm/clock.h>
 #include <asm/timer.h>
 
@@ -195,17 +198,37 @@ void clk_recalc_rate(struct clk *clk)
 		propagate_rate(clk);
 }
 
-struct clk *clk_get(const char *id)
+/*
+ * Returns a clock. Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use clock name only.
+ */
+struct clk *clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
 
 	mutex_lock(&clock_list_sem);
 	list_for_each_entry(p, &clock_list, node) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			goto found;
+		}
+	}
+
+	list_for_each_entry(p, &clock_list, node) {
 		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
 			clk = p;
 			break;
 		}
 	}
+
+found:
 	mutex_unlock(&clock_list_sem);
 
 	return clk;
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index bfb90eb..4812176 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -68,12 +68,14 @@ static void __init cache_init(void)
 
 		waysize = cpu_data->dcache.sets;
 
+#ifdef CCR_CACHE_ORA
 		/*
 		 * If the OC is already in RAM mode, we only have
 		 * half of the entries to flush..
 		 */
 		if (ccr & CCR_CACHE_ORA)
 			waysize >>= 1;
+#endif
 
 		waysize <<= cpu_data->dcache.entry_shift;
 
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 1c034c2..0049d21 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -1,8 +1,9 @@
 #
 # Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
 #
-obj-y	+= ipr.o imask.o
+obj-y	+= imask.o
 
+obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
 obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o
 obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o
 obj-$(CONFIG_CPU_HAS_INTC2_IRQ)		+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
index a33ae3e..301b505 100644
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -53,7 +53,10 @@ void static inline set_interrupt_registers(int ip)
 {
 	unsigned long __dummy;
 
-	asm volatile("ldc	%2, r6_bank\n\t"
+	asm volatile(
+#ifdef CONFIG_CPU_HAS_SR_RB
+		     "ldc	%2, r6_bank\n\t"
+#endif
 		     "stc	sr, %0\n\t"
 		     "and	#0xf0, %0\n\t"
 		     "shlr2	%0\n\t"
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index 74ca576..74defe7 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -11,22 +11,29 @@
  * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
  */
 #include <linux/kernel.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/system.h>
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7760)
+#define INTC2_BASE	0xfe080000
+#define INTC2_INTMSK	(INTC2_BASE + 0x40)
+#define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define INTC2_BASE	0xffd40000
+#define INTC2_INTMSK	(INTC2_BASE + 0x38)
+#define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
+#endif
 
 static void disable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift,
-		  INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset);
+	ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift,
-		  INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset);
+	ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
 }
 
 static struct irq_chip intc2_irq_chip = {
@@ -61,12 +68,10 @@ void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
 		/* Set the priority level */
 		local_irq_save(flags);
 
-		ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET +
-			       p->ipr_offset);
+		ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
 		ipr &= ~(0xf << p->ipr_shift);
 		ipr |= p->priority << p->ipr_shift;
-		ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET +
-			  p->ipr_offset);
+		ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
 
 		local_irq_restore(flags);
 
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index a008956..35eb575 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -19,25 +19,21 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/module.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
+#include <linux/io.h>
+#include <linux/interrupt.h>
 
 static void disable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
 }
 
 static struct irq_chip ipr_irq_chip = {
@@ -53,6 +49,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 
 	for (i = 0; i < nr_irqs; i++) {
 		unsigned int irq = table[i].irq;
+		table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
+		/* could the IPR index be mapped, if not we ignore this */
+		if (table[i].addr == 0)
+			continue;
 		disable_irq_nosync(irq);
 		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
 				      handle_level_irq, "level");
@@ -62,83 +62,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 }
 EXPORT_SYMBOL(make_ipr_irq);
 
-static struct ipr_data sys_ipr_map[] = {
-#ifndef CONFIG_CPU_SUBTYPE_SH7780
-	{ TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY },
-	{ TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY },
-#ifdef RTC_IRQ
-	{ RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY },
-#endif
-#ifdef SCI_ERI_IRQ
-	{ SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-#endif
-#ifdef SCIF1_ERI_IRQ
-	{ SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-	{ SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-#endif
-#ifdef SCIF_ERI_IRQ
-	{ SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-#endif
-#ifdef IRDA_ERI_IRQ
-	{ IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/*
-	 * Initialize the Interrupt Controller (INTC)
-	 * registers to their power on values
-	 */
-
-	/*
-	 * Enable external irq (INTC IRQ mode).
-	 * You should set corresponding bits of PFC to "00"
-	 * to enable these interrupts.
-	 */
-	{ IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY },
-	{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
-	{ IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-	{ IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY },
-	{ IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY },
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY },
-#endif
-#endif
-};
-
-void __init init_IRQ(void)
-{
-	make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map));
-
-#ifdef CONFIG_CPU_HAS_PINT_IRQ
-	init_IRQ_pint();
-#endif
-
-#ifdef CONFIG_CPU_HAS_INTC2_IRQ
-	init_IRQ_intc2();
-#endif
-	/* Perform the machine specific initialisation */
-	if (sh_mv.mv_init_irq != NULL)
-		sh_mv.mv_init_irq();
-
-	irq_ctx_init(smp_processor_id());
-}
-
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
 int ipr_irq_demux(int irq)
 {
diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile
index 389353f..f0f059a 100644
--- a/arch/sh/kernel/cpu/sh2/Makefile
+++ b/arch/sh/kernel/cpu/sh2/Makefile
@@ -2,5 +2,6 @@
 # Makefile for the Linux/SuperH SH-2 backends.
 #
 
-obj-y	:= probe.o
+obj-y	:= ex.o probe.o entry.o
 
+obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
new file mode 100644
index 0000000..d0440b2
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/kernel/cpu/sh2/clock-sh7619.c
+ *
+ * SH7619 support for the clock framework
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+const static int pll1rate[]={1,2};
+const static int pfc_divisors[]={1,2,0,4};
+
+#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2)
+#define PLL2 (4)
+#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6)
+#define PLL2 (2)
+#else
+#error "Illigal Clock Mode!"
+#endif
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+}
+
+static struct clk_ops sh7619_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7619_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+}
+
+static struct clk_ops sh7619_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk_ops sh7619_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7619_clk_ops[] = {
+	&sh7619_master_clk_ops,
+	&sh7619_module_clk_ops,
+	&sh7619_bus_clk_ops,
+	&sh7619_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7619_clk_ops))
+		*ops = sh7619_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
new file mode 100644
index 0000000..34d51b3
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -0,0 +1,341 @@
+/*
+ * arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * The SH-2 exception entry
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005  AXE,Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! already saved r0/r1
+	mov.l	r2,@-sp
+	mov.l	r3,@-sp
+	mov	r0,r1
+	cli
+	mov.l	$cpu_mode,r2
+	mov.l	@r2,r0
+	mov.l	@(5*4,r15),r3	! previous SR
+	shll2	r3		! set "S" flag
+	rotl	r0		! T <- "S" flag
+	rotl	r0		! "S" flag is LSB
+	rotcr	r3		! T -> r3:b30
+	shlr	r3
+	shlr	r0
+	bt/s	1f
+	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	! switch to kernel mode
+	mov	#1,r0
+	rotr	r0
+	rotr	r0
+	mov.l	r0,@r2		! enter kernel mode
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#0x20,r0
+	shll8	r0
+	add	r2,r0
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	add	#-4,r15		! dummy
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	@(5*4,r2),r1
+	mov.l	r1,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r3
+	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
+	mov.l	r3,@-r15	! original SP
+	mov.l	r14,@-r15
+	mov.l	r13,@-r15
+	mov.l	r12,@-r15
+	mov.l	r11,@-r15
+	mov.l	r10,@-r15
+	mov.l	r9,@-r15
+	mov.l	r8,@-r15
+	mov.l	r7,@-r15
+	mov.l	r6,@-r15
+	mov.l	r5,@-r15
+	mov.l	r4,@-r15
+	mov	r2,r8		! copy user -> kernel stack
+	mov.l	@r8+,r3
+	mov.l	r3,@-r15
+	mov.l	@r8+,r2
+	mov.l	r2,@-r15
+	mov.l	@r8+,r1
+	mov.l	r1,@-r15
+	mov.l	@r8+,r0
+	bra	2f
+	 mov.l	r0,@-r15
+1:
+	! in kernel exception
+	mov	#(22-4-4-1)*4+4,r0
+	mov	r15,r2
+	sub	r0,r15
+	mov.l	@r2+,r0		! old R3
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r0		! old R2
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r0		! old R1
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r0		! old R0
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r3		! old PC
+	mov.l	@r2+,r0		! old SR
+	add	#-4,r2		! exception frame stub (sr)
+	mov.l	r1,@-r2		! TRA
+	sts.l	macl, @-r2
+	sts.l	mach, @-r2
+	stc.l	gbr, @-r2
+	mov.l	r0,@-r2		! save old SR
+	sts.l	pr,@-r2
+	mov.l	r3,@-r2		! save old PC
+	mov	r2,r0
+	add	#8*4,r0
+	mov.l	r0,@-r2		! save old SP
+	mov.l	r14,@-r2
+	mov.l	r13,@-r2
+	mov.l	r12,@-r2
+	mov.l	r11,@-r2
+	mov.l	r10,@-r2
+	mov.l	r9,@-r2
+	mov.l	r8,@-r2
+	mov.l	r7,@-r2
+	mov.l	r6,@-r2
+	mov.l	r5,@-r2
+	mov.l	r4,@-r2
+	mov.l	@(OFF_R0,r15),r0
+	mov.l	@(OFF_R1,r15),r1
+	mov.l	@(OFF_R2,r15),r2
+	mov.l	@(OFF_R3,r15),r3
+2:
+	mov	#OFF_TRA,r8
+	add	r15,r8
+	mov.l	@r8,r9	
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#32,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 32  is trap
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8
+	mov	#0,r9
+	cmp/eq	r9,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov.l	6f,r9
+	mov.l	7f,r8
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	do_exception_error
+	
+trap_entry:	
+	add	#-0x10,r9
+	shll2	r9			! TRA
+	mov	#OFF_TRA,r8
+	add	r15,r8
+	mov.l	r9,@r8
+	mov	r9,r8
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	5f, r9
+	jsr	@r9
+	 nop
+#endif
+	sti
+	bra	system_call
+	 nop
+	
+	.align	2
+1:	.long	syscall_exit
+2:	.long	break_point_trap_software
+3:	.long	NR_syscalls
+4:	.long	sys_call_table
+#ifdef CONFIG_TRACE_IRQFLAGS
+5:	.long	trace_hardirqs_on
+#endif
+
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+debug_kernel_fw:
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov	#OFF_SR,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	#OFF_SP,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@r0
+	mov.l	r1,@(8,r0)	
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	rte
+	 mov.l	@r15+,r15
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_handler)
+	mov	r15,r4				! regs
+	add	#4,r4
+	mov	#OFF_PC,r0
+	mov.l	@(r0,r15),r6			! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+	.align	2
+
+1:	.long	do_address_error
+
+restore_all:
+	cli
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	3f, r0
+	jsr	@r0
+	 nop
+#endif
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	mov	#OFF_SR,r3
+	mov.l	@(r0,r3),r1
+	mov.l	r1,@r2
+	shll2	r1				! clear MD bit
+	shlr2	r1
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov	#OFF_PC,r3
+	mov.l	@(r0,r3),r1
+	mov.l	r1,@r2				! set pc
+	add	#4*16+4,r0
+	lds.l	@r0+,pr
+	add	#4,r0				! skip sr
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	mov.l	@r15+,r0
+	mov.l	@r15+,r1
+	mov.l	@r15+,r2
+	mov.l	@r15+,r3
+	mov.l	@r15+,r4
+	mov.l	@r15+,r5
+	mov.l	@r15+,r6
+	mov.l	@r15+,r7
+	mov.l	@r15+,r8
+	mov.l	@r15+,r9
+	mov.l	@r15+,r10
+	mov.l	@r15+,r11
+	mov.l	@r15+,r12
+	mov.l	@r15+,r13
+	mov.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+2:
+	mov.l	1f,r8
+	mov.l	2f,r9
+	jmp	@r9
+	 lds	r8,pr
+
+	.align	2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+#ifdef CONFIG_TRACE_IRQFLAGS
+3:	.long	trace_hardirqs_off
+#endif
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
new file mode 100644
index 0000000..6d285af
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/kernel/cpu/sh2/ex.S
+ *
+ * The SH-2 exception vector table
+ *
+ * Copyright (C) 2005 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+exception_entry:	
+no	=	0
+	.rept	256
+	mov.l	r0,@-sp
+	mov	#no,r0
+	bra	exception_trampoline
+	and	#0xff,r0
+no	=	no + 1
+	.endr
+exception_trampoline:
+	mov.l	r1,@-sp
+	mov.l	$exception_handler,r1
+	jmp	@r1
+
+	.align	2
+$exception_entry:
+	.long	exception_entry
+$exception_handler:
+	.long	exception_handler
+!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry + vector * 8
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index f17a2a0..ba527d9 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -17,17 +17,23 @@
 
 int __init detect_cpu_and_cache_system(void)
 {
-	/*
-	 * For now, assume SH7604 .. fix this later.
-	 */
+#if defined(CONFIG_CPU_SUBTYPE_SH7604)
 	cpu_data->type			= CPU_SH7604;
 	cpu_data->dcache.ways		= 4;
-	cpu_data->dcache.way_shift	= 6;
+	cpu_data->dcache.way_incr	= (1<<10);
 	cpu_data->dcache.sets		= 64;
 	cpu_data->dcache.entry_shift	= 4;
 	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
 	cpu_data->dcache.flags		= 0;
-
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+	cpu_data->type			= CPU_SH7619;
+	cpu_data->dcache.ways		= 4;
+	cpu_data->dcache.way_incr	= (1<<12);
+	cpu_data->dcache.sets		= 256;
+	cpu_data->dcache.entry_shift	= 4;
+	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
+	cpu_data->dcache.flags		= 0;
+#endif
 	/*
 	 * SH-2 doesn't have separate caches
 	 */
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
new file mode 100644
index 0000000..82c2d90
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -0,0 +1,53 @@
+/*
+ * SH7619 Setup
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xf8400000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 88, 89, 91, 90},
+	}, {
+		.mapbase	= 0xf8410000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 92, 93, 95, 94},
+	}, {
+		.mapbase	= 0xf8420000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 96, 97, 99, 98},
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7619_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7619_devices_setup(void)
+{
+	return platform_add_devices(sh7619_devices,
+				    ARRAY_SIZE(sh7619_devices));
+}
+__initcall(sh7619_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
new file mode 100644
index 0000000..350972a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Linux/SuperH SH-2A backends.
+#
+
+obj-y	:= common.o probe.o
+
+common-y	+= $(addprefix ../sh2/, ex.o)
+common-y	+= $(addprefix ../sh2/, entry.o)
+
+obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
new file mode 100644
index 0000000..a9ad309
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -0,0 +1,85 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+ *
+ * SH7206 support for the clock framework
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+const static int pll1rate[]={1,2,3,4,6,8};
+const static int pfc_divisors[]={1,2,3,4,6,8,12};
+#define ifc_divisors pfc_divisors
+
+#if (CONFIG_SH_CLK_MD == 2)
+#define PLL2 (4)
+#elif (CONFIG_SH_CLK_MD == 6)
+#define PLL2 (2)
+#elif (CONFIG_SH_CLK_MD == 7)
+#define PLL2 (1)
+#else
+#error "Illigal Clock Mode!"
+#endif
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct clk_ops sh7206_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7206_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct clk_ops sh7206_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7206_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7206_clk_ops[] = {
+	&sh7206_master_clk_ops,
+	&sh7206_module_clk_ops,
+	&sh7206_bus_clk_ops,
+	&sh7206_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7206_clk_ops))
+		*ops = sh7206_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
new file mode 100644
index 0000000..87c6c05
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -0,0 +1,39 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/probe.c
+ *
+ * CPU Subtype Probing for SH-2A.
+ *
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+int __init detect_cpu_and_cache_system(void)
+{
+	/* Just SH7206 for now .. */
+	cpu_data->type			= CPU_SH7206;
+
+	cpu_data->dcache.ways		= 4;
+	cpu_data->dcache.way_incr	= (1 << 11);
+	cpu_data->dcache.sets		= 128;
+	cpu_data->dcache.entry_shift	= 4;
+	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
+	cpu_data->dcache.flags		= 0;
+
+	/*
+	 * The icache is the same as the dcache as far as this setup is
+	 * concerned. The only real difference in hardware is that the icache
+	 * lacks the U bit that the dcache has, none of this has any bearing
+	 * on the cache info.
+	 */
+	cpu_data->icache		= cpu_data->dcache;
+
+	return 0;
+}
+
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
new file mode 100644
index 0000000..cdfeef49
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -0,0 +1,58 @@
+/*
+ * SH7206 Setup
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfffe8000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 240, 241, 242, 243},
+	}, {
+		.mapbase	= 0xfffe8800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 244, 245, 246, 247},
+	}, {
+		.mapbase	= 0xfffe9000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 248, 249, 250, 251},
+	}, {
+		.mapbase	= 0xfffe9800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		=  { 252, 253, 254, 255},
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7206_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7206_devices_setup(void)
+{
+	return platform_add_devices(sh7206_devices,
+				    ARRAY_SIZE(sh7206_devices));
+}
+__initcall(sh7206_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 58d3815..83905e4 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Linux/SuperH SH-3 backends.
 #
 
-obj-y	:= ex.o probe.o
+obj-y	:= ex.o probe.o entry.o
 
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index 10461a7..b791a29 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -24,7 +24,7 @@ static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
 
 static void set_bus_parent(struct clk *clk)
 {
-	struct clk *bus_clk = clk_get("bus_clk");
+	struct clk *bus_clk = clk_get(NULL, "bus_clk");
 	clk->parent = bus_clk;
 	clk_put(bus_clk);
 }
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 39aaefb..8c0dc27 100644
--- a/arch/sh/kernel/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/sh/entry.S
+ * arch/sh/kernel/entry.S
  *
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  *  Copyright (C) 2003 - 2006  Paul Mundt
@@ -7,15 +7,16 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
- *
  */
 #include <linux/sys.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
 #include <asm/unistd.h>
+#include <asm/cpu/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
 
 ! NOTE:
 ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
@@ -81,6 +82,8 @@ OFF_TRA	=  (16*4+6*4)
 #define k_g_imask	r6_bank	/* r6_bank1 */
 #define current		r7	/* r7_bank1 */
 
+#include <asm/entry-macros.S>
+	
 /*
  * Kernel mode register usage:
  *	k0	scratch
@@ -107,26 +110,6 @@ OFF_TRA	=  (16*4+6*4)
 ! this first version depends *much* on C implementation.
 !
 
-#define CLI()				\
-	stc	sr, r0;			\
-	or	#0xf0, r0;		\
-	ldc	r0, sr
-
-#define STI()				\
-	mov.l	__INV_IMASK, r11;	\
-	stc	sr, r10;		\
-	and	r11, r10;		\
-	stc	k_g_imask, r11;		\
-	or	r11, r10;		\
-	ldc	r10, sr
-
-#if defined(CONFIG_PREEMPT)
-#  define preempt_stop()	CLI()
-#else
-#  define preempt_stop()
-#  define resume_kernel		restore_all
-#endif
-
 #if defined(CONFIG_MMU)
 	.align	2
 ENTRY(tlb_miss_load)
@@ -155,29 +138,14 @@ ENTRY(tlb_protection_violation_store)
 
 call_dpf:
 	mov.l	1f, r0
-	mov	r5, r8
-	mov.l	@r0, r6
-	mov	r6, r9
-	mov.l	2f, r0
-	sts	pr, r10
-	jsr	@r0
-	 mov	r15, r4
-	!
-	tst	r0, r0
-	bf/s	0f
-	 lds	r10, pr
-	rts
-	 nop
-0:	STI()
+ 	mov.l	@r0, r6		! address
 	mov.l	3f, r0
-	mov	r9, r6
-	mov	r8, r5
+
 	jmp	@r0
-	 mov	r15, r4
+ 	 mov	r15, r4		! regs
 
 	.align 2
 1:	.long	MMU_TEA
-2:	.long	__do_page_fault
 3:	.long	do_page_fault
 
 	.align	2
@@ -203,32 +171,6 @@ call_dae:
 2:	.long   do_address_error
 #endif /* CONFIG_MMU */
 
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present.
-! If both are configured, handle the debug traps (breakpoints) in SW,
-! but still allow BIOS traps to FW.
-
-	.align	2
-debug_kernel:
-#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB)
-	/* Force BIOS call to FW (debug_trap put TRA in r8) */
-	mov	r8,r0
-	shlr2	r0
-	cmp/eq	#0x3f,r0
-	bt	debug_kernel_fw
-#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */
-
-debug_enter:		
-#if defined(CONFIG_SH_KGDB)
-	/* Jump to kgdb, pass stacked regs as arg */
-debug_kernel_sw:
-	mov.l	3f, r0
-	jmp	@r0
-	 mov	r15, r4
-	.align	2
-3:	.long	kgdb_handle_exception
-#endif /* CONFIG_SH_KGDB */
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 debug_kernel_fw:
@@ -269,276 +211,6 @@ debug_kernel_fw:
 2:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
 
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-
-
-	.align	2
-debug_trap:	
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-	mov	#OFF_SR, r0
-	mov.l	@(r0,r15), r0		! get status register
-	shll	r0
-	shll	r0			! kernel space?
-	bt/s	debug_kernel
-#endif
-	 mov.l	@r15, r0		! Restore R0 value
-	mov.l	1f, r8
-	jmp	@r8
-	 nop
-
-	.align	2
-ENTRY(exception_error)
-	!
-	STI()
-	mov.l	2f, r0
-	jmp	@r0
-	 nop
-
-!
-	.align	2
-1:	.long	break_point_trap_software
-2:	.long	do_exception_error
-
-	.align	2
-ret_from_exception:
-	preempt_stop()
-ENTRY(ret_from_irq)
-	!
-	mov	#OFF_SR, r0
-	mov.l	@(r0,r15), r0	! get status register
-	shll	r0
-	shll	r0		! kernel space?
-	bt/s	resume_kernel	! Yes, it's from kernel, go back soon
-	 GET_THREAD_INFO(r8)
-
-#ifdef CONFIG_PREEMPT
-	bra	resume_userspace
-	 nop
-ENTRY(resume_kernel)
-	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
-	tst	r0, r0
-	bf	noresched
-need_resched:
-	mov.l	@(TI_FLAGS,r8), r0	! current_thread_info->flags
-	tst	#_TIF_NEED_RESCHED, r0	! need_resched set?
-	bt	noresched
-
-	mov	#OFF_SR, r0
-	mov.l	@(r0,r15), r0		! get status register
-	and	#0xf0, r0		! interrupts off (exception path)?
-	cmp/eq	#0xf0, r0
-	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-	STI()
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	CLI()
-
-	bra	need_resched
-	 nop
-noresched:
-	bra	restore_all
-	 nop
-
-	.align 2
-1:	.long	PREEMPT_ACTIVE
-2:	.long	schedule
-#endif
-
-ENTRY(resume_userspace)
-	! r8: current_thread_info
-	CLI()
-	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
-	bt/s	restore_all
-	 tst	#_TIF_NEED_RESCHED, r0
-
-	.align	2
-work_pending:
-	! r0: current_thread_info->flags
-	! r8: current_thread_info
-	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
-	bf/s	work_resched
-	 tst	#(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
-work_notifysig:
-	bt/s	restore_all
-	 mov	r15, r4
-	mov	r12, r5		! set arg1(save_r0)
-	mov	r0, r6
-	mov.l	2f, r1
-	mova	restore_all, r0
-	jmp	@r1
-	 lds	r0, pr
-work_resched:
-#ifndef CONFIG_PREEMPT
-	! gUSA handling
-	mov.l	@(OFF_SP,r15), r0	! get user space stack pointer
-	mov	r0, r1
-	shll	r0
-	bf/s	1f
-	 shll	r0
-	bf/s	1f
-	 mov	#OFF_PC, r0
-	! 				  SP >= 0xc0000000 : gUSA mark
-	mov.l	@(r0,r15), r2		! get user space PC (program counter)
-	mov.l	@(OFF_R0,r15), r3	! end point
-	cmp/hs	r3, r2			! r2 >= r3? 
-	bt	1f
-	add	r3, r1			! rewind point #2
-	mov.l	r1, @(r0,r15)		! reset PC to rewind point #2
-	!
-1:
-#endif
-	mov.l	1f, r1
-	jsr	@r1				! schedule
-	 nop
-	CLI()
-	!
-	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
-	bt	restore_all
-	bra	work_pending
-	 tst	#_TIF_NEED_RESCHED, r0
-
-	.align	2
-1:	.long	schedule
-2:	.long	do_notify_resume
-
-	.align	2
-syscall_exit_work:
-	! r0: current_thread_info->flags
-	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE, r0
-	bt/s	work_pending
-	 tst	#_TIF_NEED_RESCHED, r0
-	STI()
-	! XXX setup arguments...
-	mov.l	4f, r0			! do_syscall_trace
-	jsr	@r0
-	 nop
-	bra	resume_userspace
-	 nop
-
-	.align	2
-syscall_trace_entry:
-	!                     	Yes it is traced.
-	! XXX setup arguments...
-	mov.l	4f, r11		! Call do_syscall_trace which notifies
-	jsr	@r11	    	! superior (will chomp R[0-7])
-	 nop
-	!			Reload R0-R4 from kernel stack, where the
-	!   	    	    	parent may have modified them using
-	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
-	!   	    	    	used by the system call handler directly
-	!   	    	    	from the kernel stack anyway, so don't need
-	!   	    	    	to be reloaded here.)  This allows the parent
-	!   	    	    	to rewrite system calls and args on the fly.
-	mov.l	@(OFF_R4,r15), r4   ! arg0
-	mov.l	@(OFF_R5,r15), r5
-	mov.l	@(OFF_R6,r15), r6
-	mov.l	@(OFF_R7,r15), r7   ! arg3
-	mov.l	@(OFF_R3,r15), r3   ! syscall_nr
-	!   	    	    Arrange for do_syscall_trace to be called
-	!   	    	    again as the system call returns.
-	mov.l	2f, r10			! Number of syscalls
-	cmp/hs	r10, r3
-	bf	syscall_call
-	mov	#-ENOSYS, r0
-	bra	syscall_exit
-	 mov.l	r0, @(OFF_R0,r15)	! Return value
-
-/*
- * Syscall interface:
- *
- *	Syscall #: R3
- *	Arguments #0 to #3: R4--R7
- *	Arguments #4 to #6: R0, R1, R2
- *	TRA: (number of arguments + 0x10) x 4
- *
- * This code also handles delegating other traps to the BIOS/gdb stub
- * according to:
- *
- * Trap number
- * (TRA>>2) 	    Purpose
- * -------- 	    -------
- * 0x0-0xf  	    old syscall ABI
- * 0x10-0x1f  	    new syscall ABI
- * 0x20-0xff  	    delegated through debug_trap to BIOS/gdb stub.
- *
- * Note: When we're first called, the TRA value must be shifted
- * right 2 bits in order to get the value that was used as the "trapa"
- * argument.
- */
-
-	.align	2
-	.globl	ret_from_fork
-ret_from_fork:
-	mov.l	1f, r8
-	jsr	@r8
-	 mov	r0, r4
-	bra	syscall_exit
-	 nop
-	.align	2
-1:	.long	schedule_tail
-	!
-ENTRY(system_call)
-	mov.l	1f, r9
-	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
-	!
-	! Is the trap argument >= 0x20? (TRA will be >= 0x80)
-	mov	#0x7f, r9
-	cmp/hi	r9, r8
-	bt/s	0f
-	 mov	#OFF_TRA, r9
-	add	r15, r9
-	!
-	mov.l	r8, @r9			! set TRA value to tra
-	STI()
-	!   	    	    Call the system call handler through the table.
-	!   	    	    First check for bad syscall number
-	mov	r3, r9
-	mov.l	2f, r8			! Number of syscalls
-	cmp/hs	r8, r9
-	bf/s	good_system_call
-	 GET_THREAD_INFO(r8)
-syscall_badsys:			! Bad syscall number
-	mov	#-ENOSYS, r0
-	bra	resume_userspace
-	 mov.l	r0, @(OFF_R0,r15)	! Return value
-	!
-0:
-	bra	debug_trap
-	 nop
-	!
-good_system_call:		! Good syscall number
-	mov.l	@(TI_FLAGS,r8), r8
-	mov	#_TIF_SYSCALL_TRACE, r10
-	tst	r10, r8
-	bf	syscall_trace_entry
-	!
-syscall_call:
-	shll2	r9		! x4
-	mov.l	3f, r8		! Load the address of sys_call_table
-	add	r8, r9
-	mov.l	@r9, r8
-	jsr	@r8	    	! jump to specific syscall handler
-	 nop
-	mov.l	@(OFF_R0,r15), r12		! save r0
-	mov.l	r0, @(OFF_R0,r15)		! save the return value
-	!
-syscall_exit:
-	CLI()
-	!
-	GET_THREAD_INFO(r8)
-	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_ALLWORK_MASK, r0
-	bf	syscall_exit_work
 restore_all:
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -606,7 +278,9 @@ skip_restore:
 	!
 	! Calculate new SR value
 	mov	k3, k2			! original SR value
-	mov.l	9f, k1
+	mov	#0xf0, k1
+	extu.b	k1, k1
+	not	k1, k1
 	and	k1, k2			! Mask orignal SR value
 	!
 	mov	k3, k0			! Calculate IMASK-bits
@@ -632,16 +306,12 @@ skip_restore:
 	 nop
 
 	.align	2
-1:	.long	TRA
-2:	.long	NR_syscalls
-3:	.long	sys_call_table
-4:	.long	do_syscall_trace
 5:	.long	0x00001000	! DSP
 7:	.long	0x30000000
-9:
-__INV_IMASK:
-	.long	0xffffff0f	! ~(IMASK)
 
+! common exception handler
+#include "../../entry-common.S"
+	
 ! Exception Vector Base
 !
 !	Should be aligned page boundary.
@@ -661,9 +331,176 @@ general_exception:
 2:	.long	ret_from_exception
 !
 !
+
+/* This code makes some assumptions to improve performance.
+ * Make sure they are stil true. */
+#if PTRS_PER_PGD != PTRS_PER_PTE
+#error PGD and PTE sizes don't match
+#endif
+
+/* gas doesn't flag impossible values for mov #immediate as an error */
+#if (_PAGE_PRESENT >> 2) > 0x7f
+#error cannot load PAGE_PRESENT as an immediate
+#endif
+#if _PAGE_DIRTY > 0x7f
+#error cannot load PAGE_DIRTY as an immediate
+#endif
+#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED
+#error cannot derive PAGE_ACCESSED from PAGE_PRESENT
+#endif
+
+#if defined(CONFIG_CPU_SH4)
+#define ldmmupteh(r)	mov.l	8f, r
+#else
+#define ldmmupteh(r)	mov	#MMU_PTEH, r
+#endif
+
 	.balign 	1024,0,1024
 tlb_miss:
-	mov.l	1f, k2
+#ifdef COUNT_EXCEPTIONS
+	! Increment the counts
+	mov.l	9f, k1
+	mov.l	@k1, k2
+	add	#1, k2
+	mov.l	k2, @k1
+#endif
+
+	! k0 scratch
+	! k1 pgd and pte pointers
+	! k2 faulting address
+	! k3 pgd and pte index masks
+	! k4 shift
+
+	! Load up the pgd entry (k1)
+
+	ldmmupteh(k0)			!  9 LS (latency=2)	MMU_PTEH
+
+	mov.w	4f, k3			!  8 LS (latency=2)	(PTRS_PER_PGD-1) << 2
+	mov	#-(PGDIR_SHIFT-2), k4	!  6 EX
+
+	mov.l	@(MMU_TEA-MMU_PTEH,k0), k2	! 18 LS (latency=2)
+
+	mov.l	@(MMU_TTB-MMU_PTEH,k0), k1	! 18 LS (latency=2)
+
+	mov	k2, k0			!   5 MT (latency=0)
+	shld	k4, k0			!  99 EX
+
+	and	k3, k0			!  78 EX
+
+	mov.l	@(k0, k1), k1		!  21 LS (latency=2)
+	mov	#-(PAGE_SHIFT-2), k4	!   6 EX
+
+	! Load up the pte entry (k2)
+
+	mov	k2, k0			!   5 MT (latency=0)
+	shld	k4, k0			!  99 EX
+
+	tst	k1, k1			!  86 MT
+
+	bt	20f			! 110 BR
+
+	and	k3, k0			!  78 EX
+	mov.w	5f, k4			!   8 LS (latency=2)	_PAGE_PRESENT
+
+	mov.l	@(k0, k1), k2		!  21 LS (latency=2)
+	add	k0, k1			!  49 EX
+
+#ifdef CONFIG_CPU_HAS_PTEA
+	! Test the entry for present and _PAGE_ACCESSED
+
+	mov	#-28, k3		!   6 EX
+	mov	k2, k0			!   5 MT (latency=0)
+
+	tst	k4, k2			!  68 MT
+	shld	k3, k0			!  99 EX
+
+	bt	20f			! 110 BR
+
+	! Set PTEA register
+	! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1)
+	!
+	! k0=pte>>28, k1=pte*, k2=pte, k3=<unused>, k4=_PAGE_PRESENT
+
+	and	#0xe, k0		!  79 EX
+
+	mov	k0, k3			!   5 MT (latency=0)
+	mov	k2, k0			!   5 MT (latency=0)
+
+	and	#1, k0			!  79 EX
+
+	or	k0, k3			!  82 EX
+
+	ldmmupteh(k0)			!   9 LS (latency=2)
+	shll2	k4			! 101 EX		_PAGE_ACCESSED
+
+	tst	k4, k2			!  68 MT
+
+	mov.l	k3, @(MMU_PTEA-MMU_PTEH,k0)	! 27 LS
+
+	mov.l	7f, k3			!   9 LS (latency=2)	_PAGE_FLAGS_HARDWARE_MASK
+
+	! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED
+#else
+
+	! Test the entry for present and _PAGE_ACCESSED
+
+	mov.l	7f, k3			!   9 LS (latency=2)	_PAGE_FLAGS_HARDWARE_MASK
+	tst	k4, k2			!  68 MT
+
+	shll2	k4			! 101 EX		_PAGE_ACCESSED
+	ldmmupteh(k0)			!   9 LS (latency=2)
+
+	bt	20f			! 110 BR
+	tst	k4, k2			!  68 MT
+
+	! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED
+
+#endif
+
+	! Set up the entry
+
+	and	k2, k3			!  78 EX
+	bt/s	10f			! 108 BR
+
+	 mov.l	k3, @(MMU_PTEL-MMU_PTEH,k0)	! 27 LS
+
+	ldtlb				! 128 CO
+
+	! At least one instruction between ldtlb and rte
+	nop				! 119 NOP
+
+	rte				! 126 CO
+
+	 nop				! 119 NOP
+
+
+10:	or	k4, k2			!  82 EX
+
+	ldtlb				! 128 CO
+
+	! At least one instruction between ldtlb and rte
+	mov.l	k2, @k1			!  27 LS
+
+	rte				! 126 CO
+
+	! Note we cannot execute mov here, because it is executed after
+	! restoring SSR, so would be executed in user space.
+	 nop				! 119 NOP
+
+
+	.align 5
+	! Once cache line if possible...
+1:	.long	swapper_pg_dir
+4:	.short	(PTRS_PER_PGD-1) << 2
+5:	.short	_PAGE_PRESENT
+7:	.long	_PAGE_FLAGS_HARDWARE_MASK
+8:	.long	MMU_PTEH
+#ifdef COUNT_EXCEPTIONS
+9:	.long	exception_count_miss
+#endif
+
+	! Either pgd or pte not present
+20:	mov.l	1f, k2
 	mov.l	4f, k3
 	bra	handle_exception
 	 mov.l	@k2, k2
@@ -710,8 +547,9 @@ ENTRY(handle_exception)
 	bt/s	1f		! It's a kernel to kernel transition.
 	 mov	r15, k0		! save original stack to k0
 	/* User space to kernel */
-	mov	#(THREAD_SIZE >> 8), k1
+	mov	#(THREAD_SIZE >> 10), k1
 	shll8	k1		! k1 := THREAD_SIZE
+	shll2	k1
 	add	current, k1
 	mov	k1, r15		! change to kernel stack
 	!
@@ -761,7 +599,7 @@ skip_save:
 	! Save the user registers on the stack.
 	mov.l	k2, @-r15	! EXPEVT
 
- 	mov	#-1, k4
+	mov	#-1, k4
 	mov.l	k4, @-r15	! set TRA (default: -1)
 	!
 	sts.l	macl, @-r15
@@ -813,6 +651,15 @@ skip_save:
 	bf	interrupt_exception
 	shlr2	r8
 	shlr	r8
+
+#ifdef COUNT_EXCEPTIONS
+	mov.l	5f, r9
+	add	r8, r9
+	mov.l	@r9, r10
+	add	#1, r10
+	mov.l	r10, @r9
+#endif
+
 	mov.l	4f, r9
 	add	r8, r9
 	mov.l	@r9, r9
@@ -826,6 +673,9 @@ skip_save:
 2:	.long	0x000080f0	! FD=1, IMASK=15
 3:	.long	0xcfffffff	! RB=0, BL=0
 4:	.long	exception_handling_table
+#ifdef COUNT_EXCEPTIONS
+5:	.long	exception_count_table
+#endif
 
 interrupt_exception:
 	mov.l	1f, r9
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 8dbf389..6e415ba 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the Linux/SuperH SH-4 backends.
 #
 
-obj-y	:= ex.o probe.o
+obj-y	:= ex.o probe.o common.o
+common-y	+= $(addprefix ../sh3/, entry.o)
 
 obj-$(CONFIG_SH_FPU)                    += fpu.o
 obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index bfdf5fe..fa2019a 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -97,7 +97,7 @@ static void shoc_clk_recalc(struct clk *clk)
 
 static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
 {
-	struct clk *bclk = clk_get("bus_clk");
+	struct clk *bclk = clk_get(NULL, "bus_clk");
 	unsigned long bclk_rate = clk_get_rate(bclk);
 
 	clk_put(bclk);
@@ -151,7 +151,7 @@ static struct clk *sh4202_onchip_clocks[] = {
 
 static int __init sh4202_clk_init(void)
 {
-	struct clk *clk = clk_get("master_clk");
+	struct clk *clk = clk_get(NULL, "master_clk");
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7780.c b/arch/sh/kernel/cpu/sh4/clock-sh7780.c
index 93ad367..9e6a216 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh7780.c
@@ -98,7 +98,7 @@ static struct clk *sh7780_onchip_clocks[] = {
 
 static int __init sh7780_clk_init(void)
 {
-	struct clk *clk = clk_get("master_clk");
+	struct clk *clk = clk_get(NULL, "master_clk");
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index f486c07..7624677 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -282,11 +282,8 @@ ieee_fpe_handler (struct pt_regs *regs)
 			grab_fpu(regs);
 			restore_fpu(tsk);
 			set_tsk_thread_flag(tsk, TIF_USEDFPU);
-		} else {
-			tsk->thread.trap_no = 11;
-			tsk->thread.error_code = 0;
+		} else
 			force_sig(SIGFPE, tsk);
-		}
 
 		regs->pc = nextpc;
 		return 1;
@@ -296,29 +293,29 @@ ieee_fpe_handler (struct pt_regs *regs)
 }
 
 asmlinkage void
-do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7,
-	     struct pt_regs regs)
+do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6,
+	     unsigned long r7, struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	struct task_struct *tsk = current;
 
-	if (ieee_fpe_handler (&regs))
+	if (ieee_fpe_handler(regs))
 		return;
 
-	regs.pc += 2;
-	save_fpu(tsk, &regs);
-	tsk->thread.trap_no = 11;
-	tsk->thread.error_code = 0;
+	regs->pc += 2;
+	save_fpu(tsk, regs);
 	force_sig(SIGFPE, tsk);
 }
 
 asmlinkage void
 do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6,
-		     unsigned long r7, struct pt_regs regs)
+		     unsigned long r7, struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	struct task_struct *tsk = current;
 
-	grab_fpu(&regs);
-	if (!user_mode(&regs)) {
+	grab_fpu(regs);
+	if (!user_mode(regs)) {
 		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
 		return;
 	}
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index c294de1..afe0f1b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -79,16 +79,16 @@ int __init detect_cpu_and_cache_system(void)
 	case 0x205:
 		cpu_data->type = CPU_SH7750;
 		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
-				   CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
+				   CPU_HAS_PERF_COUNTER;
 		break;
 	case 0x206:
 		cpu_data->type = CPU_SH7750S;
 		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
-				   CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
+				   CPU_HAS_PERF_COUNTER;
 		break;
 	case 0x1100:
 		cpu_data->type = CPU_SH7751;
-		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+		cpu_data->flags |= CPU_HAS_FPU;
 		break;
 	case 0x2000:
 		cpu_data->type = CPU_SH73180;
@@ -126,23 +126,22 @@ int __init detect_cpu_and_cache_system(void)
 		break;
 	case 0x8000:
 		cpu_data->type = CPU_ST40RA;
-		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+		cpu_data->flags |= CPU_HAS_FPU;
 		break;
 	case 0x8100:
 		cpu_data->type = CPU_ST40GX1;
-		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+		cpu_data->flags |= CPU_HAS_FPU;
 		break;
 	case 0x700:
 		cpu_data->type = CPU_SH4_501;
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
-		cpu_data->flags |= CPU_HAS_PTEA;
 		break;
 	case 0x600:
 		cpu_data->type = CPU_SH4_202;
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
-		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+		cpu_data->flags |= CPU_HAS_FPU;
 		break;
 	case 0x500 ... 0x501:
 		switch (prr) {
@@ -160,7 +159,7 @@ int __init detect_cpu_and_cache_system(void)
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
 
-		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+		cpu_data->flags |= CPU_HAS_FPU;
 
 		break;
 	default:
@@ -173,6 +172,10 @@ int __init detect_cpu_and_cache_system(void)
 	cpu_data->dcache.ways = 1;
 #endif
 
+#ifdef CONFIG_CPU_HAS_PTEA
+	cpu_data->flags |= CPU_HAS_PTEA;
+#endif
+
 	/*
 	 * On anything that's not a direct-mapped cache, look to the CVR
 	 * for I/D-cache specifics.
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 50812d5..bbcb06f 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -2,6 +2,7 @@
  * SH7750/SH7751 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 #include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -46,3 +48,71 @@ static int __init sh7750_devices_setup(void)
 				    ARRAY_SIZE(sh7750_devices));
 }
 __initcall(sh7750_devices_setup);
+
+static struct ipr_data sh7750_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0, 12, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 19, 0,  4, 2 }, /* TMU2 TIPCI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 23, 1,  4, 3 }, /* SCI ERI */
+	{ 24, 1,  4, 3 }, /* SCI RXI */
+	{ 25, 1,  4, 3 }, /* SCI TXI */
+	{ 40, 2,  4, 3 }, /* SCIF ERI */
+	{ 41, 2,  4, 3 }, /* SCIF RXI */
+	{ 42, 2,  4, 3 }, /* SCIF BRI */
+	{ 43, 2,  4, 3 }, /* SCIF TXI */
+	{ 34, 2,  8, 7 }, /* DMAC DMTE0 */
+	{ 35, 2,  8, 7 }, /* DMAC DMTE1 */
+	{ 36, 2,  8, 7 }, /* DMAC DMTE2 */
+	{ 37, 2,  8, 7 }, /* DMAC DMTE3 */
+	{ 28, 2,  8, 7 }, /* DMAC DMAE */
+};
+
+static struct ipr_data sh7751_ipr_map[] = {
+	{ 44, 2,  8, 7 }, /* DMAC DMTE4 */
+	{ 45, 2,  8, 7 }, /* DMAC DMTE5 */
+	{ 46, 2,  8, 7 }, /* DMAC DMTE6 */
+	{ 47, 2,  8, 7 }, /* DMAC DMTE7 */
+	/* The following use INTC_INPRI00 for masking, which is a 32-bit
+	   register, not a 16-bit register like the IPRx registers, so it
+	   would need special support */
+	/*{ 72, INTPRI00,  8, ? },*/ /* TMU3 TUNI */
+	/*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+/* enable individual interrupt mode for external interupts */
+void ipr_irq_enable_irlm(void)
+{
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map));
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+	make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map));
+#endif
+}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
index 814ddb2..9aeaa2d 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
@@ -79,25 +79,27 @@ static int __init sh7780_devices_setup(void)
 __initcall(sh7780_devices_setup);
 
 static struct intc2_data intc2_irq_table[] = {
-	{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2 },
-	{ 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-	{ 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-	{ 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-	{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
-	{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
-	{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
-	{ SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+	{ 28, 0, 24, 0, 0, 2 },		/* TMU0 */
 
-	{ SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
-	{ SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
-	{ SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
-	{ SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+	{ 21, 1,  0, 0, 2, 2 },
+	{ 22, 1,  1, 0, 2, 2 },
+	{ 23, 1,  2, 0, 2, 2 },
 
-	{ PCIC0_IRQ, 0x10,  8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
-	{ PCIC1_IRQ, 0x10,  0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
-	{ PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
-	{ PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
-	{ PCIC4_IRQ, 0x14,  8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
+	{ 40, 8, 24, 0, 3, 3 },		/* SCIF0 ERI */
+	{ 41, 8, 24, 0, 3, 3 },		/* SCIF0 RXI */
+	{ 42, 8, 24, 0, 3, 3 },		/* SCIF0 BRI */
+	{ 43, 8, 24, 0, 3, 3 },		/* SCIF0 TXI */
+
+	{ 76, 8, 16, 0, 4, 3 },		/* SCIF1 ERI */
+	{ 77, 8, 16, 0, 4, 3 },		/* SCIF1 RXI */
+	{ 78, 8, 16, 0, 4, 3 },		/* SCIF1 BRI */
+	{ 79, 8, 16, 0, 4, 3 },		/* SCIF1 TXI */
+
+	{ 64, 0x10,  8, 0, 14, 2 },	/* PCIC0 */
+	{ 65, 0x10,  0, 0, 15, 2 },	/* PCIC1 */
+	{ 66, 0x14, 24, 0, 16, 2 },	/* PCIC2 */
+	{ 67, 0x14, 16, 0, 17, 2 },	/* PCIC3 */
+	{ 68, 0x14,  8, 0, 18, 2 },	/* PCIC4 */
 };
 
 void __init init_IRQ_intc2(void)
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 7bcc73f..55f4350 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -19,7 +19,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu/sq.h>
@@ -67,6 +67,7 @@ void sq_flush_range(unsigned long start, unsigned int len)
 	/* Wait for completion */
 	store_queue_barrier();
 }
+EXPORT_SYMBOL(sq_flush_range);
 
 static inline void sq_mapping_list_add(struct sq_mapping *map)
 {
@@ -166,7 +167,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size,
 	map->size = size;
 	map->name = name;
 
-	page = bitmap_find_free_region(sq_bitmap, 0x04000000,
+	page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT,
 				       get_order(map->size));
 	if (unlikely(page < 0)) {
 		ret = -ENOSPC;
@@ -193,6 +194,7 @@ out:
 	kmem_cache_free(sq_cache, map);
 	return ret;
 }
+EXPORT_SYMBOL(sq_remap);
 
 /**
  * sq_unmap - Unmap a Store Queue allocation
@@ -234,6 +236,7 @@ void sq_unmap(unsigned long vaddr)
 
 	kmem_cache_free(sq_cache, map);
 }
+EXPORT_SYMBOL(sq_unmap);
 
 /*
  * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
@@ -402,7 +405,3 @@ module_exit(sq_api_exit);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
 MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sq_remap);
-EXPORT_SYMBOL(sq_unmap);
-EXPORT_SYMBOL(sq_flush_range);
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index a000227..6034082 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -12,7 +12,7 @@
 #include <linux/console.h>
 #include <linux/tty.h>
 #include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
@@ -62,17 +62,9 @@ static struct console bios_console = {
 #include <linux/serial_core.h>
 #include "../../../drivers/serial/sh-sci.h"
 
-#ifdef CONFIG_CPU_SH4
-#define SCIF_REG	0xffe80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
-#define SCIF_REG	0xfffe9800
-#else
-#error "Undefined SCIF for this subtype"
-#endif
-
 static struct uart_port scif_port = {
-	.mapbase	= SCIF_REG,
-	.membase	= (char __iomem *)SCIF_REG,
+	.mapbase	= CONFIG_EARLY_SCIF_CONSOLE_PORT,
+	.membase	= (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
 };
 
 static void scif_sercon_putc(int c)
@@ -113,23 +105,29 @@ static struct console scif_console = {
 	.index		= -1,
 };
 
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+/*
+ * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
+ * devices that aren't using sh-ipl+g.
+ */
 static void scif_sercon_init(int baud)
 {
-	ctrl_outw(0, SCIF_REG + 8);
-	ctrl_outw(0, SCIF_REG);
+	ctrl_outw(0, scif_port.mapbase + 8);
+	ctrl_outw(0, scif_port.mapbase);
 
 	/* Set baud rate */
 	ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
-		  (32 * baud) - 1, SCIF_REG + 4);
-
-	ctrl_outw(12, SCIF_REG + 24);
-	ctrl_outw(8, SCIF_REG + 24);
-	ctrl_outw(0, SCIF_REG + 32);
-	ctrl_outw(0x60, SCIF_REG + 16);
-	ctrl_outw(0, SCIF_REG + 36);
-	ctrl_outw(0x30, SCIF_REG + 8);
+		  (32 * baud) - 1, scif_port.mapbase + 4);
+
+	ctrl_outw(12, scif_port.mapbase + 24);
+	ctrl_outw(8, scif_port.mapbase + 24);
+	ctrl_outw(0, scif_port.mapbase + 32);
+	ctrl_outw(0x60, scif_port.mapbase + 16);
+	ctrl_outw(0, scif_port.mapbase + 36);
+	ctrl_outw(0x30, scif_port.mapbase + 8);
 }
-#endif
+#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* CONFIG_EARLY_SCIF_CONSOLE */
 
 /*
  * Setup a default console, if more than one is compiled in, rely on the
@@ -168,7 +166,7 @@ int __init setup_early_printk(char *opt)
 	if (!strncmp(buf, "serial", 6)) {
 		early_console = &scif_console;
 
-#ifdef CONFIG_CPU_SH4
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
 		scif_sercon_init(115200);
 #endif
 	}
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
new file mode 100644
index 0000000..29136a3
--- /dev/null
+++ b/arch/sh/kernel/entry-common.S
@@ -0,0 +1,433 @@
+/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
+ *
+ *  linux/arch/sh/entry.S
+ *
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+! NOTE:
+! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
+! to be jumped is too far, but it causes illegal slot exception.
+
+/*	
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * NOTE: This code uses a convention that instructions in the delay slot
+ * of a transfer-control instruction are indented by an extra space, thus:
+ *
+ *    jmp	@k0	    ! control-transfer instruction
+ *     ldc	k1, ssr     ! delay slot
+ *
+ * Stack layout in 'ret_from_syscall':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in ptrace.c and ptrace.h
+ *
+ *	r0
+ *      ...
+ *	r15 = stack pointer
+ *	spc
+ *	pr
+ *	ssr
+ *	gbr
+ *	mach
+ *	macl
+ *	syscall #
+ *
+ */
+
+#if defined(CONFIG_PREEMPT)
+#  define preempt_stop()	cli
+#else
+#  define preempt_stop()
+#  define resume_kernel		__restore_all
+#endif
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present.
+! If both are configured, handle the debug traps (breakpoints) in SW,
+! but still allow BIOS traps to FW.
+
+	.align	2
+debug_kernel:
+#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB)
+	/* Force BIOS call to FW (debug_trap put TRA in r8) */
+	mov	r8,r0
+	shlr2	r0
+	cmp/eq	#0x3f,r0
+	bt	debug_kernel_fw
+#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */
+
+debug_enter:		
+#if defined(CONFIG_SH_KGDB)
+	/* Jump to kgdb, pass stacked regs as arg */
+debug_kernel_sw:
+	mov.l	3f, r0
+	jmp	@r0
+	 mov	r15, r4
+	.align	2
+3:	.long	kgdb_handle_exception
+#endif /* CONFIG_SH_KGDB */
+
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+
+
+	.align	2
+debug_trap:	
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0		! get status register
+	shll	r0
+	shll	r0			! kernel space?
+	bt/s	debug_kernel
+#endif
+	 mov.l	@r15, r0		! Restore R0 value
+	mov.l	1f, r8
+	jmp	@r8
+	 nop
+
+	.align	2
+ENTRY(exception_error)
+	!
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	3f, r0
+	jsr	@r0
+	 nop
+#endif
+	sti
+	mov.l	2f, r0
+	jmp	@r0
+	 nop
+
+!
+	.align	2
+1:	.long	break_point_trap_software
+2:	.long	do_exception_error
+#ifdef CONFIG_TRACE_IRQFLAGS
+3:	.long	trace_hardirqs_on
+#endif
+
+	.align	2
+ret_from_exception:
+	preempt_stop()
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	4f, r0
+	jsr	@r0
+	 nop
+#endif
+ENTRY(ret_from_irq)
+	!
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
+	shll	r0
+	shll	r0		! kernel space?
+	get_current_thread_info r8, r0
+	bt	resume_kernel	! Yes, it's from kernel, go back soon
+
+#ifdef CONFIG_PREEMPT
+	bra	resume_userspace
+	 nop
+ENTRY(resume_kernel)
+	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
+	tst	r0, r0
+	bf	noresched
+need_resched:
+	mov.l	@(TI_FLAGS,r8), r0	! current_thread_info->flags
+	tst	#_TIF_NEED_RESCHED, r0	! need_resched set?
+	bt	noresched
+
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0		! get status register
+	and	#0xf0, r0		! interrupts off (exception path)?
+	cmp/eq	#0xf0, r0
+	bt	noresched
+
+	mov.l	1f, r0
+	mov.l	r0, @(TI_PRE_COUNT,r8)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	3f, r0
+	jsr	@r0
+	 nop
+#endif
+	sti
+	mov.l	2f, r0
+	jsr	@r0
+	 nop
+	mov	#0, r0
+	mov.l	r0, @(TI_PRE_COUNT,r8)
+	cli
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	4f, r0
+	jsr	@r0
+	 nop
+#endif
+
+	bra	need_resched
+	 nop
+
+noresched:
+	bra	__restore_all
+	 nop
+
+	.align 2
+1:	.long	PREEMPT_ACTIVE
+2:	.long	schedule
+#ifdef CONFIG_TRACE_IRQFLAGS
+3:	.long	trace_hardirqs_on
+4:	.long	trace_hardirqs_off
+#endif
+#endif
+
+ENTRY(resume_userspace)
+	! r8: current_thread_info
+	cli
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	5f, r0
+	jsr	@r0
+	 nop
+#endif
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#_TIF_WORK_MASK, r0
+	bt/s	__restore_all
+	 tst	#_TIF_NEED_RESCHED, r0
+
+	.align	2
+work_pending:
+	! r0: current_thread_info->flags
+	! r8: current_thread_info
+	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
+	bf/s	work_resched
+	 tst	#(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
+work_notifysig:
+	bt/s	__restore_all
+	 mov	r15, r4
+	mov	r12, r5		! set arg1(save_r0)
+	mov	r0, r6
+	mov.l	2f, r1
+	mov.l	3f, r0
+	jmp	@r1
+	 lds	r0, pr
+work_resched:
+#ifndef CONFIG_PREEMPT
+	! gUSA handling
+	mov.l	@(OFF_SP,r15), r0	! get user space stack pointer
+	mov	r0, r1
+	shll	r0
+	bf/s	1f
+	 shll	r0
+	bf/s	1f
+	 mov	#OFF_PC, r0
+	! 				  SP >= 0xc0000000 : gUSA mark
+	mov.l	@(r0,r15), r2		! get user space PC (program counter)
+	mov.l	@(OFF_R0,r15), r3	! end point
+	cmp/hs	r3, r2			! r2 >= r3? 
+	bt	1f
+	add	r3, r1			! rewind point #2
+	mov.l	r1, @(r0,r15)		! reset PC to rewind point #2
+	!
+1:
+#endif
+	mov.l	1f, r1
+	jsr	@r1				! schedule
+	 nop
+	cli
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	5f, r0
+	jsr	@r0
+	 nop
+#endif
+	!
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#_TIF_WORK_MASK, r0
+	bt	__restore_all
+	bra	work_pending
+	 tst	#_TIF_NEED_RESCHED, r0
+
+	.align	2
+1:	.long	schedule
+2:	.long	do_notify_resume
+3:	.long	restore_all
+#ifdef CONFIG_TRACE_IRQFLAGS
+4:	.long	trace_hardirqs_on
+5:	.long	trace_hardirqs_off
+#endif
+
+	.align	2
+syscall_exit_work:
+	! r0: current_thread_info->flags
+	! r8: current_thread_info
+	tst	#_TIF_SYSCALL_TRACE, r0
+	bt/s	work_pending
+	 tst	#_TIF_NEED_RESCHED, r0
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	5f, r0
+	jsr	@r0
+	 nop
+#endif
+	sti
+	! XXX setup arguments...
+	mov.l	4f, r0			! do_syscall_trace
+	jsr	@r0
+	 nop
+	bra	resume_userspace
+	 nop
+
+	.align	2
+syscall_trace_entry:
+	!                     	Yes it is traced.
+	! XXX setup arguments...
+	mov.l	4f, r11		! Call do_syscall_trace which notifies
+	jsr	@r11	    	! superior (will chomp R[0-7])
+	 nop
+	!			Reload R0-R4 from kernel stack, where the
+	!   	    	    	parent may have modified them using
+	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
+	!   	    	    	used by the system call handler directly
+	!   	    	    	from the kernel stack anyway, so don't need
+	!   	    	    	to be reloaded here.)  This allows the parent
+	!   	    	    	to rewrite system calls and args on the fly.
+	mov.l	@(OFF_R4,r15), r4   ! arg0
+	mov.l	@(OFF_R5,r15), r5
+	mov.l	@(OFF_R6,r15), r6
+	mov.l	@(OFF_R7,r15), r7   ! arg3
+	mov.l	@(OFF_R3,r15), r3   ! syscall_nr
+	!
+	mov.l	2f, r10			! Number of syscalls
+	cmp/hs	r10, r3
+	bf	syscall_call
+	mov	#-ENOSYS, r0
+	bra	syscall_exit
+	 mov.l	r0, @(OFF_R0,r15)	! Return value
+
+__restore_all:
+	mov.l	1f, r0
+	jmp	@r0
+	 nop
+
+	.align	2
+1:	.long	restore_all
+
+	.align	2
+not_syscall_tra:	
+	bra	debug_trap
+	 nop
+
+	.align	2
+syscall_badsys:			! Bad syscall number
+	mov	#-ENOSYS, r0
+	bra	resume_userspace
+	 mov.l	r0, @(OFF_R0,r15)	! Return value
+	
+
+/*
+ * Syscall interface:
+ *
+ *	Syscall #: R3
+ *	Arguments #0 to #3: R4--R7
+ *	Arguments #4 to #6: R0, R1, R2
+ *	TRA: (number of arguments + 0x10) x 4
+ *
+ * This code also handles delegating other traps to the BIOS/gdb stub
+ * according to:
+ *
+ * Trap number
+ * (TRA>>2) 	    Purpose
+ * -------- 	    -------
+ * 0x0-0xf  	    old syscall ABI
+ * 0x10-0x1f  	    new syscall ABI
+ * 0x20-0xff  	    delegated through debug_trap to BIOS/gdb stub.
+ *
+ * Note: When we're first called, the TRA value must be shifted
+ * right 2 bits in order to get the value that was used as the "trapa"
+ * argument.
+ */
+
+	.align	2
+	.globl	ret_from_fork
+ret_from_fork:
+	mov.l	1f, r8
+	jsr	@r8
+	 mov	r0, r4
+	bra	syscall_exit
+	 nop
+	.align	2
+1:	.long	schedule_tail
+	!
+ENTRY(system_call)
+#if !defined(CONFIG_CPU_SH2)
+	mov.l	1f, r9
+	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
+#endif
+	!
+	! Is the trap argument >= 0x20? (TRA will be >= 0x80)
+	mov	#0x7f, r9
+	cmp/hi	r9, r8
+	bt/s	not_syscall_tra
+	 mov	#OFF_TRA, r9
+	add	r15, r9
+	mov.l	r8, @r9			! set TRA value to tra
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	5f, r10
+	jsr	@r10
+	 nop
+#endif
+	sti
+
+	!
+	get_current_thread_info r8, r10
+	mov.l	@(TI_FLAGS,r8), r8
+	mov	#_TIF_SYSCALL_TRACE, r10
+	tst	r10, r8
+	bf	syscall_trace_entry
+	!
+	mov.l	2f, r8			! Number of syscalls
+	cmp/hs	r8, r3
+	bt	syscall_badsys
+	!
+syscall_call:
+	shll2	r3		! x4
+	mov.l	3f, r8		! Load the address of sys_call_table
+	add	r8, r3
+	mov.l	@r3, r8
+	jsr	@r8	    	! jump to specific syscall handler
+	 nop
+	mov.l	@(OFF_R0,r15), r12		! save r0
+	mov.l	r0, @(OFF_R0,r15)		! save the return value
+	!
+syscall_exit:
+	cli
+#ifdef CONFIG_TRACE_IRQFLAGS
+	mov.l	6f, r0
+	jsr	@r0
+	 nop
+#endif
+	!
+	get_current_thread_info r8, r0
+	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
+	tst	#_TIF_ALLWORK_MASK, r0
+	bf	syscall_exit_work
+	bra	__restore_all
+	 nop
+	.align	2
+#if !defined(CONFIG_CPU_SH2)
+1:	.long	TRA
+#endif
+2:	.long	NR_syscalls
+3:	.long	sys_call_table
+4:	.long	do_syscall_trace
+#ifdef CONFIG_TRACE_IRQFLAGS
+5:	.long	trace_hardirqs_on
+6:	.long	trace_hardirqs_off
+#endif
diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S
index f5f53d1..6aca4bc 100644
--- a/arch/sh/kernel/head.S
+++ b/arch/sh/kernel/head.S
@@ -33,7 +33,7 @@ ENTRY(empty_zero_page)
 	.long	0x00360000	/* INITRD_START */
 	.long	0x000a0000	/* INITRD_SIZE */
 	.long	0
-	.balign 4096,0,4096
+	.balign PAGE_SIZE,0,PAGE_SIZE
 
 	.text	
 /*
@@ -53,8 +53,10 @@ ENTRY(_stext)
 	ldc	r0, sr
 	!			Initialize global interrupt mask
 	mov	#0, r0
+#ifdef CONFIG_CPU_HAS_SR_RB
 	ldc	r0, r6_bank
-
+#endif
+	
 	/*
 	 * Prefetch if possible to reduce cache miss penalty.
 	 *
@@ -68,11 +70,14 @@ ENTRY(_stext)
 	!
 	mov.l	2f, r0
 	mov	r0, r15		! Set initial r15 (stack pointer)
-	mov	#(THREAD_SIZE >> 8), r1
+	mov	#(THREAD_SIZE >> 10), r1
 	shll8	r1		! r1 = THREAD_SIZE
+	shll2	r1
 	sub	r1, r0		!
+#ifdef CONFIG_CPU_HAS_SR_RB
 	ldc	r0, r7_bank	! ... and initial thread_info
-
+#endif
+	
 	!			Clear BSS area
 	mov.l	3f, r1
 	add	#4, r1
@@ -95,7 +100,11 @@ ENTRY(_stext)
 	 nop
 
 	.balign 4
+#if defined(CONFIG_CPU_SH2)
+1:	.long	0x000000F0		! IMASK=0xF
+#else
 1:	.long	0x400080F0		! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
+#endif
 2:	.long	init_thread_union+THREAD_SIZE
 3:	.long	__bss_start
 4:	.long	_end
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 944128c..67be2b6 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -12,7 +12,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
@@ -78,15 +78,16 @@ union irq_ctx {
 	u32			stack[THREAD_SIZE/sizeof(u32)];
 };
 
-static union irq_ctx *hardirq_ctx[NR_CPUS];
-static union irq_ctx *softirq_ctx[NR_CPUS];
+static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
+static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
 asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 		      unsigned long r6, unsigned long r7,
-		      struct pt_regs regs)
+		      struct pt_regs __regs)
 {
-	struct pt_regs *old_regs = set_irq_regs(&regs);
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	struct pt_regs *old_regs = set_irq_regs(regs);
 	int irq;
 #ifdef CONFIG_4KSTACKS
 	union irq_ctx *curctx, *irqctx;
@@ -111,7 +112,7 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_CPU_HAS_INTEVT
-	irq = (ctrl_inl(INTEVT) >> 5) - 16;
+	irq = evt2irq(ctrl_inl(INTEVT));
 #else
 	irq = r4;
 #endif
@@ -135,17 +136,24 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 		irqctx->tinfo.task = curctx->tinfo.task;
 		irqctx->tinfo.previous_sp = current_stack_pointer;
 
+		/*
+		 * Copy the softirq bits in preempt_count so that the
+		 * softirq checks work in the hardirq context.
+		 */
+		irqctx->tinfo.preempt_count =
+			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
 		__asm__ __volatile__ (
 			"mov	%0, r4		\n"
-			"mov	r15, r9		\n"
+			"mov	r15, r8		\n"
 			"jsr	@%1		\n"
 			/* swith to the irq stack */
 			" mov	%2, r15		\n"
 			/* restore the stack (ring zero) */
-			"mov	r9, r15		\n"
+			"mov	r8, r15		\n"
 			: /* no outputs */
 			: "r" (irq), "r" (generic_handle_irq), "r" (isp)
-			/* XXX: A somewhat excessive clobber list? -PFM */
 			: "memory", "r0", "r1", "r2", "r3", "r4",
 			  "r5", "r6", "r7", "r8", "t", "pr"
 		);
@@ -193,7 +201,7 @@ void irq_ctx_init(int cpu)
 	irqctx->tinfo.task		= NULL;
 	irqctx->tinfo.exec_domain	= NULL;
 	irqctx->tinfo.cpu		= cpu;
-	irqctx->tinfo.preempt_count	= SOFTIRQ_OFFSET;
+	irqctx->tinfo.preempt_count	= 0;
 	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	softirq_ctx[cpu] = irqctx;
@@ -239,13 +247,38 @@ asmlinkage void do_softirq(void)
 			"mov	r9, r15		\n"
 			: /* no outputs */
 			: "r" (__do_softirq), "r" (isp)
-			/* XXX: A somewhat excessive clobber list? -PFM */
 			: "memory", "r0", "r1", "r2", "r3", "r4",
 			  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
 		);
+
+		/*
+		 * Shouldnt happen, we returned above if in_interrupt():
+		 */
+		WARN_ON_ONCE(softirq_count());
 	}
 
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(do_softirq);
 #endif
+
+void __init init_IRQ(void)
+{
+#ifdef CONFIG_CPU_HAS_PINT_IRQ
+	init_IRQ_pint();
+#endif
+
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+	init_IRQ_intc2();
+#endif
+
+#ifdef CONFIG_CPU_HAS_IPR_IRQ
+	init_IRQ_ipr();
+#endif
+
+	/* Perform the machine specific initialisation */
+	if (sh_mv.mv_init_irq)
+		sh_mv.mv_init_irq();
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index a52b13a..f3e2631 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -385,10 +385,11 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne
 
 asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
 			unsigned long r6, unsigned long r7,
-			struct pt_regs regs)
+			struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 #ifdef CONFIG_MMU
-	return do_fork(SIGCHLD, regs.regs[15], &regs, 0, NULL, NULL);
+	return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL);
 #else
 	/* fork almost works, enough to trick you into looking elsewhere :-( */
 	return -EINVAL;
@@ -398,11 +399,12 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
 asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
 			 unsigned long parent_tidptr,
 			 unsigned long child_tidptr,
-			 struct pt_regs regs)
+			 struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	if (!newsp)
-		newsp = regs.regs[15];
-	return do_fork(clone_flags, newsp, &regs, 0,
+		newsp = regs->regs[15];
+	return do_fork(clone_flags, newsp, regs, 0,
 			(int __user *)parent_tidptr, (int __user *)child_tidptr);
 }
 
@@ -418,9 +420,10 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
  */
 asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
 			 unsigned long r6, unsigned long r7,
-			 struct pt_regs regs)
+			 struct pt_regs __regs)
 {
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.regs[15], &regs,
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->regs[15], regs,
 		       0, NULL, NULL);
 }
 
@@ -429,8 +432,9 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
  */
 asmlinkage int sys_execve(char *ufilename, char **uargv,
 			  char **uenvp, unsigned long r7,
-			  struct pt_regs regs)
+			  struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int error;
 	char *filename;
 
@@ -442,7 +446,7 @@ asmlinkage int sys_execve(char *ufilename, char **uargv,
 	error = do_execve(filename,
 			  (char __user * __user *)uargv,
 			  (char __user * __user *)uenvp,
-			  &regs);
+			  regs);
 	if (error == 0) {
 		task_lock(current);
 		current->ptrace &= ~PT_DTRACE;
@@ -472,9 +476,7 @@ unsigned long get_wchan(struct task_struct *p)
 	return pc;
 }
 
-asmlinkage void break_point_trap(unsigned long r4, unsigned long r5,
-				 unsigned long r6, unsigned long r7,
-				 struct pt_regs regs)
+asmlinkage void break_point_trap(void)
 {
 	/* Clear tracing.  */
 #if defined(CONFIG_CPU_SH4A)
@@ -492,8 +494,10 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5,
 
 asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5,
 					  unsigned long r6, unsigned long r7,
-					  struct pt_regs regs)
+					  struct pt_regs __regs)
 {
-	regs.pc -= 2;
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+
+	regs->pc -= 2;
 	force_sig(SIGTRAP, current);
 }
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
index 8221b37..c66cb32 100644
--- a/arch/sh/kernel/relocate_kernel.S
+++ b/arch/sh/kernel/relocate_kernel.S
@@ -7,11 +7,9 @@
  * This source code is licensed under the GNU General Public License,
  * Version 2.  See the file COPYING for more details.
  */
-
 #include <linux/linkage.h>
-
-#define PAGE_SIZE      4096 /* must be same value as in <asm/page.h> */
-
+#include <asm/addrspace.h>
+#include <asm/page.h>
 
 		.globl relocate_new_kernel
 relocate_new_kernel:
@@ -20,8 +18,8 @@ relocate_new_kernel:
 	/* r6 = start_address      */
 	/* r7 = vbr_reg            */
 
-	mov.l	10f,r8	  /* 4096 */
-	mov.l	11f,r9    /* 0xa0000000 */
+	mov.l	10f,r8	  /* PAGE_SIZE */
+	mov.l	11f,r9    /* P2SEG */
 
 	/*  stack setting */
 	add	r8,r5
@@ -32,7 +30,7 @@ relocate_new_kernel:
 0:
 	mov.l	@r4+,r0	  /* cmd = *ind++ */
 
-1:	/* addr = (cmd | 0xa0000000) & 0xfffffff0 */
+1:	/* addr = (cmd | P2SEG) & 0xfffffff0 */
 	mov	r0,r2
 	or	r9,r2
 	mov	#-16,r1
@@ -92,7 +90,7 @@ relocate_new_kernel:
 10:
 	.long	PAGE_SIZE
 11:
-	.long	0xa0000000
+	.long	P2SEG
 
 relocate_new_kernel_end:
 
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 36d86f9..696ca75 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -392,6 +392,7 @@ static int __init topology_init(void)
 subsys_initcall(topology_init);
 
 static const char *cpu_name[] = {
+	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
 	[CPU_SH7604]	= "SH7604",	[CPU_SH7300]	= "SH7300",
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
@@ -404,6 +405,7 @@ static const char *cpu_name[] = {
 	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
 	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
 	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
+	[CPU_SH7785]	= "SH7785",
 	[CPU_SH_NONE]	= "Unknown"
 };
 
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 8a2fd19..c706f3b 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -73,8 +73,6 @@ DECLARE_EXPORT(__lshrdi3);
 DECLARE_EXPORT(__movstr);
 DECLARE_EXPORT(__movstrSI16);
 
-EXPORT_SYMBOL(strcpy);
-
 #ifdef CONFIG_CPU_SH4
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index 5213f5b..50d7c49 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -37,7 +37,7 @@
 asmlinkage int
 sys_sigsuspend(old_sigset_t mask,
 	       unsigned long r5, unsigned long r6, unsigned long r7,
-	       struct pt_regs regs)
+	       struct pt_regs __regs)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -52,7 +52,7 @@ sys_sigsuspend(old_sigset_t mask,
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage int 
+asmlinkage int
 sys_sigaction(int sig, const struct old_sigaction __user *act,
 	      struct old_sigaction __user *oact)
 {
@@ -87,9 +87,11 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 asmlinkage int
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r6, unsigned long r7,
-		struct pt_regs regs)
+		struct pt_regs __regs)
 {
-	return do_sigaltstack(uss, uoss, regs.regs[15]);
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+
+	return do_sigaltstack(uss, uoss, regs->regs[15]);
 }
 
 
@@ -98,7 +100,11 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
  */
 
 #define MOVW(n)	 (0x9300|((n)-2))	/* Move mem word at PC+n to R3 */
-#define TRAP16	 0xc310			/* Syscall w/no args (NR in R3) */
+#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A)
+#define TRAP_NOARG 0xc320		/* Syscall w/no args (NR in R3) */
+#else
+#define TRAP_NOARG 0xc310		/* Syscall w/no args (NR in R3) */
+#endif
 #define OR_R0_R0 0x200b			/* or r0,r0 (insert to avoid hardware bug) */
 
 struct sigframe
@@ -194,9 +200,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 
 asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
 			     unsigned long r6, unsigned long r7,
-			     struct pt_regs regs)
+			     struct pt_regs __regs)
 {
-	struct sigframe __user *frame = (struct sigframe __user *)regs.regs[15];
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15];
 	sigset_t set;
 	int r0;
 
@@ -216,7 +223,7 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->sc, &r0))
+	if (restore_sigcontext(regs, &frame->sc, &r0))
 		goto badframe;
 	return r0;
 
@@ -227,9 +234,10 @@ badframe:
 
 asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
-				struct pt_regs regs)
+				struct pt_regs __regs)
 {
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.regs[15];
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
 	sigset_t set;
 	stack_t st;
 	int r0;
@@ -246,14 +254,14 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->uc.uc_mcontext, &r0))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
 		goto badframe;
 
 	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
 		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs.regs[15]);
+	do_sigaltstack(&st, NULL, regs->regs[15]);
 
 	return r0;
 
@@ -350,7 +358,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	} else {
 		/* Generate return code (system call to sigreturn) */
 		err |= __put_user(MOVW(7), &frame->retcode[0]);
-		err |= __put_user(TRAP16, &frame->retcode[1]);
+		err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[2]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[3]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[4]);
@@ -430,7 +438,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	} else {
 		/* Generate return code (system call to rt_sigreturn) */
 		err |= __put_user(MOVW(7), &frame->retcode[0]);
-		err |= __put_user(TRAP16, &frame->retcode[1]);
+		err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[2]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[3]);
 		err |= __put_user(OR_R0_R0, &frame->retcode[4]);
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
new file mode 100644
index 0000000..0d5268a
--- /dev/null
+++ b/arch/sh/kernel/stacktrace.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/kernel/stacktrace.c
+ *
+ * Stack trace management functions
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <asm/ptrace.h>
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task)
+		task = current;
+	if (task == current)
+		sp = (unsigned long *)current_stack_pointer;
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = addr;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+	}
+}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 8fde950..5083b6e 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -33,14 +33,15 @@
  */
 asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	unsigned long r6, unsigned long r7,
-	struct pt_regs regs)
+	struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int fd[2];
 	int error;
 
 	error = do_pipe(fd);
 	if (!error) {
-		regs.regs[1] = fd[1];
+		regs->regs[1] = fd[1];
 		return fd[0];
 	}
 	return error;
@@ -50,6 +51,7 @@ unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 
 EXPORT_SYMBOL(shm_align_mask);
 
+#ifdef CONFIG_MMU
 /*
  * To avoid cache aliases, we map the shared page with same color.
  */
@@ -135,6 +137,7 @@ full_search:
 			addr = COLOUR_ALIGN(addr, pgoff);
 	}
 }
+#endif /* CONFIG_MMU */
 
 static inline long
 do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, 
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 57e708d..c206c95 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -13,6 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/profile.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
 #include <asm/clock.h>
 #include <asm/rtc.h>
 #include <asm/timer.h>
@@ -50,15 +52,20 @@ unsigned long long __attribute__ ((weak)) sched_clock(void)
 #ifndef CONFIG_GENERIC_TIME
 void do_gettimeofday(struct timeval *tv)
 {
+	unsigned long flags;
 	unsigned long seq;
 	unsigned long usec, sec;
 
 	do {
-		seq = read_seqbegin(&xtime_lock);
+		/*
+		 * Turn off IRQs when grabbing xtime_lock, so that
+		 * the sys_timer get_offset code doesn't have to handle it.
+		 */
+		seq = read_seqbegin_irqsave(&xtime_lock, flags);
 		usec = get_timer_offset();
 		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry(&xtime_lock, seq));
+		usec += xtime.tv_nsec / NSEC_PER_USEC;
+	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 
 	while (usec >= 1000000) {
 		usec -= 1000000;
@@ -85,7 +92,7 @@ int do_settimeofday(struct timespec *tv)
 	 * wall time.  Discover what correction gettimeofday() would have
 	 * made, and then undo it!
 	 */
-	nsec -= 1000 * get_timer_offset();
+	nsec -= get_timer_offset() * NSEC_PER_USEC;
 
 	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
 	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
@@ -169,6 +176,108 @@ static struct sysdev_class timer_sysclass = {
 	.resume	 = timer_resume,
 };
 
+#ifdef CONFIG_NO_IDLE_HZ
+static int timer_dyn_tick_enable(void)
+{
+	struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick;
+	unsigned long flags;
+	int ret = -ENODEV;
+
+	if (dyn_tick) {
+		spin_lock_irqsave(&dyn_tick->lock, flags);
+		ret = 0;
+		if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
+			ret = dyn_tick->enable();
+
+			if (ret == 0)
+				dyn_tick->state |= DYN_TICK_ENABLED;
+		}
+		spin_unlock_irqrestore(&dyn_tick->lock, flags);
+	}
+
+	return ret;
+}
+
+static int timer_dyn_tick_disable(void)
+{
+	struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick;
+	unsigned long flags;
+	int ret = -ENODEV;
+
+	if (dyn_tick) {
+		spin_lock_irqsave(&dyn_tick->lock, flags);
+		ret = 0;
+		if (dyn_tick->state & DYN_TICK_ENABLED) {
+			ret = dyn_tick->disable();
+
+			if (ret == 0)
+				dyn_tick->state &= ~DYN_TICK_ENABLED;
+		}
+		spin_unlock_irqrestore(&dyn_tick->lock, flags);
+	}
+
+	return ret;
+}
+
+/*
+ * Reprogram the system timer for at least the calculated time interval.
+ * This function should be called from the idle thread with IRQs disabled,
+ * immediately before sleeping.
+ */
+void timer_dyn_reprogram(void)
+{
+	struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick;
+	unsigned long next, seq, flags;
+
+	if (!dyn_tick)
+		return;
+
+	spin_lock_irqsave(&dyn_tick->lock, flags);
+	if (dyn_tick->state & DYN_TICK_ENABLED) {
+		next = next_timer_interrupt();
+		do {
+			seq = read_seqbegin(&xtime_lock);
+			dyn_tick->reprogram(next - jiffies);
+		} while (read_seqretry(&xtime_lock, seq));
+	}
+	spin_unlock_irqrestore(&dyn_tick->lock, flags);
+}
+
+static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
+{
+	return sprintf(buf, "%i\n",
+		       (sys_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
+}
+
+static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
+				  size_t count)
+{
+	unsigned int enable = simple_strtoul(buf, NULL, 2);
+
+	if (enable)
+		timer_dyn_tick_enable();
+	else
+		timer_dyn_tick_disable();
+
+	return count;
+}
+static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
+
+/*
+ * dyntick=enable|disable
+ */
+static char dyntick_str[4] __initdata = "";
+
+static int __init dyntick_setup(char *str)
+{
+	if (str)
+		strlcpy(dyntick_str, str, sizeof(dyntick_str));
+	return 1;
+}
+
+__setup("dyntick=", dyntick_setup);
+#endif
+
 static int __init timer_init_sysfs(void)
 {
 	int ret = sysdev_class_register(&timer_sysclass);
@@ -176,7 +285,22 @@ static int __init timer_init_sysfs(void)
 		return ret;
 
 	sys_timer->dev.cls = &timer_sysclass;
-	return sysdev_register(&sys_timer->dev);
+	ret = sysdev_register(&sys_timer->dev);
+
+#ifdef CONFIG_NO_IDLE_HZ
+	if (ret == 0 && sys_timer->dyn_tick) {
+		ret = sysdev_create_file(&sys_timer->dev, &attr_dyn_tick);
+
+		/*
+		 * Turn on dynamic tick after calibrate delay
+		 * for correct bogomips
+		 */
+		if (ret == 0 && dyntick_str[0] == 'e')
+			ret = timer_dyn_tick_enable();
+	}
+#endif
+
+	return ret;
 }
 device_initcall(timer_init_sysfs);
 
@@ -200,6 +324,11 @@ void __init time_init(void)
 	sys_timer = get_sys_timer();
 	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
 
+#ifdef CONFIG_NO_IDLE_HZ
+	if (sys_timer->dyn_tick)
+		spin_lock_init(&sys_timer->dyn_tick->lock);
+#endif
+
 #if defined(CONFIG_SH_KGDB)
 	/*
 	 * Set up kgdb as requested. We do it here because the serial
diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile
index 151a6a3..bcf244f 100644
--- a/arch/sh/kernel/timers/Makefile
+++ b/arch/sh/kernel/timers/Makefile
@@ -5,4 +5,6 @@
 obj-y	:= timer.o
 
 obj-$(CONFIG_SH_TMU)		+= timer-tmu.o
+obj-$(CONFIG_SH_MTU2)		+= timer-mtu2.o
+obj-$(CONFIG_SH_CMT)		+= timer-cmt.o
 
diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c
new file mode 100644
index 0000000..a574b93
--- /dev/null
+++ b/arch/sh/kernel/timers/timer-cmt.c
@@ -0,0 +1,196 @@
+/*
+ * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support
+ *
+ *  Copyright (C) 2005  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/seqlock.h>
+#include <asm/timer.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/clock.h>
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define CMT_CMSTR	0xf84a0070
+#define CMT_CMCSR_0	0xf84a0072
+#define CMT_CMCNT_0	0xf84a0074
+#define CMT_CMCOR_0	0xf84a0076
+#define CMT_CMCSR_1	0xf84a0078
+#define CMT_CMCNT_1	0xf84a007a
+#define CMT_CMCOR_1	0xf84a007c
+
+#define STBCR3		0xf80a0000
+#define cmt_clock_enable() do {	ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0)
+#define CMT_CMCSR_INIT	0x0040
+#define CMT_CMCSR_CALIB	0x0000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+#define CMT_CMSTR	0xfffec000
+#define CMT_CMCSR_0	0xfffec002
+#define CMT_CMCNT_0	0xfffec004
+#define CMT_CMCOR_0	0xfffec006
+
+#define STBCR4		0xfffe040c
+#define cmt_clock_enable() do {	ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0)
+#define CMT_CMCSR_INIT	0x0040
+#define CMT_CMCSR_CALIB	0x0000
+#else
+#error "Unknown CPU SUBTYPE"
+#endif
+
+static unsigned long cmt_timer_get_offset(void)
+{
+	int count;
+	static unsigned short count_p = 0xffff;    /* for the first call after boot */
+	static unsigned long jiffies_p = 0;
+
+	/*
+	 * cache volatile jiffies temporarily; we have IRQs turned off.
+	 */
+	unsigned long jiffies_t;
+
+	/* timer count may underflow right here */
+	count =  ctrl_inw(CMT_CMCOR_0);
+	count -= ctrl_inw(CMT_CMCNT_0);
+
+	jiffies_t = jiffies;
+
+	/*
+	 * avoiding timer inconsistencies (they are rare, but they happen)...
+	 * there is one kind of problem that must be avoided here:
+	 *  1. the timer counter underflows
+	 */
+
+	if (jiffies_t == jiffies_p) {
+		if (count > count_p) {
+			/* the nutcase */
+			if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */
+				count -= LATCH;
+			} else {
+				printk("%s (): hardware timer problem?\n",
+				       __FUNCTION__);
+			}
+		}
+	} else
+		jiffies_p = jiffies_t;
+
+	count_p = count;
+
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	count = (count + LATCH/2) / LATCH;
+
+	return count;
+}
+
+static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id)
+{
+	unsigned long timer_status;
+
+	/* Clear CMF bit */
+	timer_status = ctrl_inw(CMT_CMCSR_0);
+	timer_status &= ~0x80;
+	ctrl_outw(timer_status, CMT_CMCSR_0);
+
+	/*
+	 * Here we are in the timer irq handler. We just have irqs locally
+	 * disabled but we don't know if the timer_bh is running on the other
+	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+	 * the irq version of write_lock because as just said we have irq
+	 * locally disabled. -arca
+	 */
+	write_seqlock(&xtime_lock);
+	handle_timer_tick();
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction cmt_irq = {
+	.name		= "timer",
+	.handler	= cmt_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+static void cmt_clk_init(struct clk *clk)
+{
+	u8 divisor = CMT_CMCSR_INIT & 0x3;
+	ctrl_inw(CMT_CMCSR_0);
+	ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0);
+	clk->parent = clk_get(NULL, "module_clk");
+	clk->rate = clk->parent->rate / (8 << (divisor << 1));
+}
+
+static void cmt_clk_recalc(struct clk *clk)
+{
+	u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3;
+	clk->rate = clk->parent->rate / (8 << (divisor << 1));
+}
+
+static struct clk_ops cmt_clk_ops = {
+	.init		= cmt_clk_init,
+	.recalc		= cmt_clk_recalc,
+};
+
+static struct clk cmt0_clk = {
+	.name		= "cmt0_clk",
+	.ops		= &cmt_clk_ops,
+};
+
+static int cmt_timer_start(void)
+{
+	ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR);
+	return 0;
+}
+
+static int cmt_timer_stop(void)
+{
+	ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR);
+	return 0;
+}
+
+static int cmt_timer_init(void)
+{
+	unsigned long interval;
+
+	cmt_clock_enable();
+
+	setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq);
+
+	cmt0_clk.parent = clk_get(NULL, "module_clk");
+
+	cmt_timer_stop();
+
+	interval = cmt0_clk.parent->rate / 8 / HZ;
+	printk(KERN_INFO "Interval = %ld\n", interval);
+
+	ctrl_outw(interval, CMT_CMCOR_0);
+
+	clk_register(&cmt0_clk);
+	clk_enable(&cmt0_clk);
+
+	cmt_timer_start();
+
+	return 0;
+}
+
+struct sys_timer_ops cmt_timer_ops = {
+	.init		= cmt_timer_init,
+	.start		= cmt_timer_start,
+	.stop		= cmt_timer_stop,
+#ifndef CONFIG_GENERIC_TIME
+	.get_offset	= cmt_timer_get_offset,
+#endif
+};
+
+struct sys_timer cmt_timer = {
+	.name	= "cmt",
+	.ops	= &cmt_timer_ops,
+};
diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c
new file mode 100644
index 0000000..fffcd1c
--- /dev/null
+++ b/arch/sh/kernel/timers/timer-mtu2.c
@@ -0,0 +1,200 @@
+/*
+ * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * Based off of arch/sh/kernel/timers/timer-tmu.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/seqlock.h>
+#include <asm/timer.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/clock.h>
+
+/*
+ * We use channel 1 for our lowly system timer. Channel 2 would be the other
+ * likely candidate, but we leave it alone as it has higher divisors that
+ * would be of more use to other more interesting applications.
+ *
+ * TODO: Presently we only implement a 16-bit single-channel system timer.
+ * However, we can implement channel cascade if we go the overflow route and
+ * get away with using 2 MTU2 channels as a 32-bit timer.
+ */
+#define MTU2_TSTR	0xfffe4280
+#define MTU2_TCR_1	0xfffe4380
+#define MTU2_TMDR_1	0xfffe4381
+#define MTU2_TIOR_1	0xfffe4382
+#define MTU2_TIER_1	0xfffe4384
+#define MTU2_TSR_1	0xfffe4385
+#define MTU2_TCNT_1	0xfffe4386	/* 16-bit counter */
+#define MTU2_TGRA_1	0xfffe438a
+
+#define STBCR3		0xfffe0408
+
+#define MTU2_TSTR_CST1	(1 << 1)	/* Counter Start 1 */
+
+#define MTU2_TSR_TGFA	(1 << 0)	/* GRA compare match */
+
+#define MTU2_TIER_TGIEA	(1 << 0)	/* GRA compare match  interrupt enable */
+
+#define MTU2_TCR_INIT	0x22
+
+#define MTU2_TCR_CALIB  0x00
+
+static unsigned long mtu2_timer_get_offset(void)
+{
+	int count;
+	static int count_p = 0x7fff;	/* for the first call after boot */
+	static unsigned long jiffies_p = 0;
+
+	/*
+	 * cache volatile jiffies temporarily; we have IRQs turned off.
+	 */
+	unsigned long jiffies_t;
+
+	/* timer count may underflow right here */
+	count = ctrl_inw(MTU2_TCNT_1);	/* read the latched count */
+
+	jiffies_t = jiffies;
+
+	/*
+	 * avoiding timer inconsistencies (they are rare, but they happen)...
+	 * there is one kind of problem that must be avoided here:
+	 *  1. the timer counter underflows
+	 */
+
+	if (jiffies_t == jiffies_p) {
+		if (count > count_p) {
+			if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) {
+				count -= LATCH;
+			} else {
+				printk("%s (): hardware timer problem?\n",
+				       __FUNCTION__);
+			}
+		}
+	} else
+		jiffies_p = jiffies_t;
+
+	count_p = count;
+
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	count = (count + LATCH/2) / LATCH;
+
+	return count;
+}
+
+static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id)
+{
+	unsigned long timer_status;
+
+	/* Clear TGFA bit */
+	timer_status = ctrl_inb(MTU2_TSR_1);
+	timer_status &= ~MTU2_TSR_TGFA;
+	ctrl_outb(timer_status, MTU2_TSR_1);
+
+	/* Do timer tick */
+	write_seqlock(&xtime_lock);
+	handle_timer_tick();
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mtu2_irq = {
+	.name		= "timer",
+	.handler	= mtu2_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 };
+
+static void mtu2_clk_init(struct clk *clk)
+{
+	u8 idx = MTU2_TCR_INIT & 0x7;
+
+	clk->rate = clk->parent->rate / divisors[idx];
+	/* Start TCNT counting */
+	ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
+
+}
+
+static void mtu2_clk_recalc(struct clk *clk)
+{
+	u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7;
+	clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops mtu2_clk_ops = {
+	.init		= mtu2_clk_init,
+	.recalc		= mtu2_clk_recalc,
+};
+
+static struct clk mtu2_clk1 = {
+	.name		= "mtu2_clk1",
+	.ops		= &mtu2_clk_ops,
+};
+
+static int mtu2_timer_start(void)
+{
+	ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
+	return 0;
+}
+
+static int mtu2_timer_stop(void)
+{
+	ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR);
+	return 0;
+}
+
+static int mtu2_timer_init(void)
+{
+	u8 tmp;
+	unsigned long interval;
+
+	setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq);
+
+	mtu2_clk1.parent = clk_get(NULL, "module_clk");
+
+	ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3);
+
+	/* Normal operation */
+	ctrl_outb(0, MTU2_TMDR_1);
+	ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1);
+	ctrl_outb(0x01, MTU2_TIOR_1);
+
+	/* Enable underflow interrupt */
+	ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1);
+
+	interval = CONFIG_SH_PCLK_FREQ / 16 / HZ;
+	printk(KERN_INFO "Interval = %ld\n", interval);
+
+	ctrl_outw(interval, MTU2_TGRA_1);
+	ctrl_outw(0, MTU2_TCNT_1);
+
+	clk_register(&mtu2_clk1);
+	clk_enable(&mtu2_clk1);
+
+	return 0;
+}
+
+struct sys_timer_ops mtu2_timer_ops = {
+	.init		= mtu2_timer_init,
+	.start		= mtu2_timer_start,
+	.stop		= mtu2_timer_stop,
+#ifndef CONFIG_GENERIC_TIME
+	.get_offset	= mtu2_timer_get_offset,
+#endif
+};
+
+struct sys_timer mtu2_timer = {
+	.name	= "mtu2",
+	.ops	= &mtu2_timer_ops,
+};
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2492701..e060e71 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/spinlock.h>
 #include <linux/seqlock.h>
 #include <asm/timer.h>
 #include <asm/rtc.h>
@@ -31,13 +30,9 @@
 
 #define TMU0_TCR_CALIB	0x0000
 
-static DEFINE_SPINLOCK(tmu0_lock);
-
 static unsigned long tmu_timer_get_offset(void)
 {
 	int count;
-	unsigned long flags;
-
 	static int count_p = 0x7fffffff;    /* for the first call after boot */
 	static unsigned long jiffies_p = 0;
 
@@ -46,7 +41,6 @@ static unsigned long tmu_timer_get_offset(void)
 	 */
 	unsigned long jiffies_t;
 
-	spin_lock_irqsave(&tmu0_lock, flags);
 	/* timer count may underflow right here */
 	count = ctrl_inl(TMU0_TCNT);	/* read the latched count */
 
@@ -72,7 +66,6 @@ static unsigned long tmu_timer_get_offset(void)
 		jiffies_p = jiffies_t;
 
 	count_p = count;
-	spin_unlock_irqrestore(&tmu0_lock, flags);
 
 	count = ((LATCH-1) - count) * TICK_SIZE;
 	count = (count + LATCH/2) / LATCH;
@@ -106,7 +99,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
 static struct irqaction tmu_irq = {
 	.name		= "timer",
 	.handler	= tmu_timer_interrupt,
-	.flags		= IRQF_DISABLED,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.mask		= CPU_MASK_NONE,
 };
 
@@ -149,9 +142,9 @@ static int tmu_timer_init(void)
 {
 	unsigned long interval;
 
-	setup_irq(TIMER_IRQ, &tmu_irq);
+	setup_irq(CONFIG_SH_TIMER_IRQ, &tmu_irq);
 
-	tmu0_clk.parent = clk_get("module_clk");
+	tmu0_clk.parent = clk_get(NULL, "module_clk");
 
 	/* Start TMU0 */
 	tmu_timer_stop();
diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c
index dc1f631..a6bcc91 100644
--- a/arch/sh/kernel/timers/timer.c
+++ b/arch/sh/kernel/timers/timer.c
@@ -17,6 +17,12 @@ static struct sys_timer *sys_timers[] __initdata = {
 #ifdef CONFIG_SH_TMU
 	&tmu_timer,
 #endif
+#ifdef CONFIG_SH_MTU2
+	&mtu2_timer,
+#endif
+#ifdef CONFIG_SH_CMT
+	&cmt_timer,
+#endif
 	NULL,
 };
 
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 53dfa55..3762d9d 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -18,13 +18,14 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/io.h>
+#include <linux/debug_locks.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
-#define CHK_REMOTE_DEBUG(regs)                 	\
-{       					\
+#define CHK_REMOTE_DEBUG(regs)			\
+{						\
 	if (kgdb_debug_hook && !user_mode(regs))\
 		(*kgdb_debug_hook)(regs);       \
 }
@@ -33,8 +34,13 @@
 #endif
 
 #ifdef CONFIG_CPU_SH2
-#define TRAP_RESERVED_INST	4
-#define TRAP_ILLEGAL_SLOT_INST	6
+# define TRAP_RESERVED_INST	4
+# define TRAP_ILLEGAL_SLOT_INST	6
+# define TRAP_ADDRESS_ERROR	9
+# ifdef CONFIG_CPU_SH2A
+#  define TRAP_DIVZERO_ERROR	17
+#  define TRAP_DIVOVF_ERROR	18
+# endif
 #else
 #define TRAP_RESERVED_INST	12
 #define TRAP_ILLEGAL_SLOT_INST	13
@@ -88,7 +94,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 
 	if (!user_mode(regs) || in_interrupt())
 		dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
-		 	 (unsigned long)task_stack_page(current));
+			 (unsigned long)task_stack_page(current));
 
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
@@ -102,8 +108,6 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs,
 		die(str, regs, err);
 }
 
-static int handle_unaligned_notify_count = 10;
-
 /*
  * try and fix up kernelspace address errors
  * - userspace errors just cause EFAULT to be returned, resulting in SEGV
@@ -198,7 +202,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
 		if (copy_to_user(dst,src,4))
 			goto fetch_fault;
 		ret = 0;
- 		break;
+		break;
 
 	case 2: /* mov.[bwl] to memory, possibly with pre-decrement */
 		if (instruction & 4)
@@ -222,7 +226,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
 		if (copy_from_user(dst,src,4))
 			goto fetch_fault;
 		ret = 0;
- 		break;
+		break;
 
 	case 6:	/* mov.[bwl] from memory, possibly with post-increment */
 		src = (unsigned char*) *rm;
@@ -230,7 +234,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
 			*rm += count;
 		dst = (unsigned char*) rn;
 		*(unsigned long*)dst = 0;
-		
+
 #ifdef __LITTLE_ENDIAN__
 		if (copy_from_user(dst, src, count))
 			goto fetch_fault;
@@ -241,7 +245,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
 		}
 #else
 		dst += 4-count;
-		
+
 		if (copy_from_user(dst, src, count))
 			goto fetch_fault;
 
@@ -320,7 +324,8 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs)
 			return -EFAULT;
 
 		/* kernel */
-		die("delay-slot-insn faulting in handle_unaligned_delayslot", regs, 0);
+		die("delay-slot-insn faulting in handle_unaligned_delayslot",
+		    regs, 0);
 	}
 
 	return handle_unaligned_ins(instruction,regs);
@@ -342,6 +347,13 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs)
 #define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
 #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
 
+/*
+ * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit
+ * opcodes..
+ */
+#ifndef CONFIG_CPU_SH2A
+static int handle_unaligned_notify_count = 10;
+
 static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
 {
 	u_int rm;
@@ -354,7 +366,8 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
 	if (user_mode(regs) && handle_unaligned_notify_count>0) {
 		handle_unaligned_notify_count--;
 
-		printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+		printk(KERN_NOTICE "Fixing up unaligned userspace access "
+		       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 		       current->comm,current->pid,(u16*)regs->pc,instruction);
 	}
 
@@ -478,32 +491,58 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
 		regs->pc += 2;
 	return ret;
 }
+#endif /* CONFIG_CPU_SH2A */
+
+#ifdef CONFIG_CPU_HAS_SR_RB
+#define lookup_exception_vector(x)	\
+	__asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x)))
+#else
+#define lookup_exception_vector(x)	\
+	__asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x)))
+#endif
 
 /*
- * Handle various address error exceptions
+ * Handle various address error exceptions:
+ *  - instruction address error:
+ *       misaligned PC
+ *       PC >= 0x80000000 in user mode
+ *  - data address error (read and write)
+ *       misaligned data access
+ *       access to >= 0x80000000 is user mode
+ * Unfortuntaly we can't distinguish between instruction address error
+ * and data address errors caused by read acceses.
  */
-asmlinkage void do_address_error(struct pt_regs *regs, 
+asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long writeaccess,
 				 unsigned long address)
 {
-	unsigned long error_code;
+	unsigned long error_code = 0;
 	mm_segment_t oldfs;
+	siginfo_t info;
+#ifndef CONFIG_CPU_SH2A
 	u16 instruction;
 	int tmp;
+#endif
 
-	asm volatile("stc       r2_bank,%0": "=r" (error_code));
+	/* Intentional ifdef */
+#ifdef CONFIG_CPU_HAS_SR_RB
+	lookup_exception_vector(error_code);
+#endif
 
 	oldfs = get_fs();
 
 	if (user_mode(regs)) {
+		int si_code = BUS_ADRERR;
+
 		local_irq_enable();
-		current->thread.error_code = error_code;
-		current->thread.trap_no = (writeaccess) ? 8 : 7;
 
 		/* bad PC is not something we can fix */
-		if (regs->pc & 1)
+		if (regs->pc & 1) {
+			si_code = BUS_ADRALN;
 			goto uspace_segv;
+		}
 
+#ifndef CONFIG_CPU_SH2A
 		set_fs(USER_DS);
 		if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) {
 			/* Argh. Fault on the instruction itself.
@@ -518,14 +557,23 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		if (tmp==0)
 			return; /* sorted */
+#endif
 
-	uspace_segv:
-		printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm);
-		force_sig(SIGSEGV, current);
+uspace_segv:
+		printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
+		       "access (PC %lx PR %lx)\n", current->comm, regs->pc,
+		       regs->pr);
+
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = si_code;
+		info.si_addr = (void *) address;
+		force_sig_info(SIGBUS, &info, current);
 	} else {
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
+#ifndef CONFIG_CPU_SH2A
 		set_fs(KERNEL_DS);
 		if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) {
 			/* Argh. Fault on the instruction itself.
@@ -537,6 +585,12 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		handle_unaligned_access(instruction, regs);
 		set_fs(oldfs);
+#else
+		printk(KERN_NOTICE "Killing process \"%s\" due to unaligned "
+		       "access\n", current->comm);
+
+		force_sig(SIGSEGV, current);
+#endif
 	}
 }
 
@@ -548,7 +602,7 @@ int is_dsp_inst(struct pt_regs *regs)
 {
 	unsigned short inst;
 
-	/* 
+	/*
 	 * Safe guard if DSP mode is already enabled or we're lacking
 	 * the DSP altogether.
 	 */
@@ -569,27 +623,49 @@ int is_dsp_inst(struct pt_regs *regs)
 #define is_dsp_inst(regs)	(0)
 #endif /* CONFIG_SH_DSP */
 
+#ifdef CONFIG_CPU_SH2A
+asmlinkage void do_divide_error(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs __regs)
+{
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	siginfo_t info;
+
+	switch (r4) {
+	case TRAP_DIVZERO_ERROR:
+		info.si_code = FPE_INTDIV;
+		break;
+	case TRAP_DIVOVF_ERROR:
+		info.si_code = FPE_INTOVF;
+		break;
+	}
+
+	force_sig_info(SIGFPE, &info, current);
+}
+#endif
+
 /* arch/sh/kernel/cpu/sh4/fpu.c */
 extern int do_fpu_inst(unsigned short, struct pt_regs *);
 extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7, struct pt_regs regs);
+		unsigned long r6, unsigned long r7, struct pt_regs __regs);
 
 asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
-				struct pt_regs regs)
+				struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	unsigned long error_code;
 	struct task_struct *tsk = current;
 
 #ifdef CONFIG_SH_FPU_EMU
-	unsigned short inst;
+	unsigned short inst = 0;
 	int err;
 
-	get_user(inst, (unsigned short*)regs.pc);
+	get_user(inst, (unsigned short*)regs->pc);
 
-	err = do_fpu_inst(inst, &regs);
+	err = do_fpu_inst(inst, regs);
 	if (!err) {
-		regs.pc += 2;
+		regs->pc += 2;
 		return;
 	}
 	/* not a FPU inst. */
@@ -597,20 +673,19 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
 
 #ifdef CONFIG_SH_DSP
 	/* Check if it's a DSP instruction */
- 	if (is_dsp_inst(&regs)) {
+	if (is_dsp_inst(regs)) {
 		/* Enable DSP mode, and restart instruction. */
-		regs.sr |= SR_DSP;
+		regs->sr |= SR_DSP;
 		return;
 	}
 #endif
 
-	asm volatile("stc	r2_bank, %0": "=r" (error_code));
+	lookup_exception_vector(error_code);
+
 	local_irq_enable();
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = TRAP_RESERVED_INST;
-	CHK_REMOTE_DEBUG(&regs);
+	CHK_REMOTE_DEBUG(regs);
 	force_sig(SIGILL, tsk);
-	die_if_no_fixup("reserved instruction", &regs, error_code);
+	die_if_no_fixup("reserved instruction", regs, error_code);
 }
 
 #ifdef CONFIG_SH_FPU_EMU
@@ -658,39 +733,41 @@ static int emulate_branch(unsigned short inst, struct pt_regs* regs)
 
 asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
-				struct pt_regs regs)
+				struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	unsigned long error_code;
 	struct task_struct *tsk = current;
 #ifdef CONFIG_SH_FPU_EMU
-	unsigned short inst;
+	unsigned short inst = 0;
 
-	get_user(inst, (unsigned short *)regs.pc + 1);
-	if (!do_fpu_inst(inst, &regs)) {
-		get_user(inst, (unsigned short *)regs.pc);
-		if (!emulate_branch(inst, &regs))
+	get_user(inst, (unsigned short *)regs->pc + 1);
+	if (!do_fpu_inst(inst, regs)) {
+		get_user(inst, (unsigned short *)regs->pc);
+		if (!emulate_branch(inst, regs))
 			return;
 		/* fault in branch.*/
 	}
 	/* not a FPU inst. */
 #endif
 
-	asm volatile("stc	r2_bank, %0": "=r" (error_code));
+	lookup_exception_vector(error_code);
+
 	local_irq_enable();
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = TRAP_RESERVED_INST;
-	CHK_REMOTE_DEBUG(&regs);
+	CHK_REMOTE_DEBUG(regs);
 	force_sig(SIGILL, tsk);
-	die_if_no_fixup("illegal slot instruction", &regs, error_code);
+	die_if_no_fixup("illegal slot instruction", regs, error_code);
 }
 
 asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
 				   unsigned long r6, unsigned long r7,
-				   struct pt_regs regs)
+				   struct pt_regs __regs)
 {
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	long ex;
-	asm volatile("stc	r2_bank, %0" : "=r" (ex));
-	die_if_kernel("exception", &regs, ex);
+
+	lookup_exception_vector(ex);
+	die_if_kernel("exception", regs, ex);
 }
 
 #if defined(CONFIG_SH_STANDARD_BIOS)
@@ -735,12 +812,16 @@ void *set_exception_table_vec(unsigned int vec, void *handler)
 {
 	extern void *exception_handling_table[];
 	void *old_handler;
-	
+
 	old_handler = exception_handling_table[vec];
 	exception_handling_table[vec] = handler;
 	return old_handler;
 }
 
+extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5,
+					     unsigned long r6, unsigned long r7,
+					     struct pt_regs __regs);
+
 void __init trap_init(void)
 {
 	set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst);
@@ -759,7 +840,15 @@ void __init trap_init(void)
 	set_exception_table_evt(0x800, do_fpu_state_restore);
 	set_exception_table_evt(0x820, do_fpu_state_restore);
 #endif
-		
+
+#ifdef CONFIG_CPU_SH2
+	set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler);
+#endif
+#ifdef CONFIG_CPU_SH2A
+	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
+	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#endif
+
 	/* Setup VBR for boot cpu */
 	per_cpu_trap_init();
 }
@@ -784,6 +873,11 @@ void show_trace(struct task_struct *tsk, unsigned long *sp,
 	}
 
 	printk("\n");
+
+	if (!tsk)
+		tsk = current;
+
+	debug_show_held_locks(tsk);
 }
 
 void show_stack(struct task_struct *tsk, unsigned long *sp)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 9dd6064..4e0362f 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -4,8 +4,12 @@ menu "Processor selection"
 # Processor families
 #
 config CPU_SH2
+	select SH_WRITETHROUGH if !CPU_SH2A
 	bool
-	select SH_WRITETHROUGH
+
+config CPU_SH2A
+	bool
+	select CPU_SH2
 
 config CPU_SH3
 	bool
@@ -16,6 +20,7 @@ config CPU_SH4
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
+	select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40
 
 config CPU_SH4A
 	bool
@@ -40,6 +45,16 @@ config CPU_SUBTYPE_SH7604
 	bool "Support SH7604 processor"
 	select CPU_SH2
 
+config CPU_SUBTYPE_SH7619
+	bool "Support SH7619 processor"
+	select CPU_SH2
+
+comment "SH-2A Processor Support"
+
+config CPU_SUBTYPE_SH7206
+	bool "Support SH7206 processor"
+	select CPU_SH2A
+
 comment "SH-3 Processor Support"
 
 config CPU_SUBTYPE_SH7300
@@ -89,6 +104,7 @@ comment "SH-4 Processor Support"
 config CPU_SUBTYPE_SH7750
 	bool "Support SH7750 processor"
 	select CPU_SH4
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
 
@@ -104,15 +120,18 @@ config CPU_SUBTYPE_SH7750R
 	bool "Support SH7750R processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7750
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7750S
 	bool "Support SH7750S processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7750
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7751
 	bool "Support SH7751 processor"
 	select CPU_SH4
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
 	  or if you have a HD6417751R CPU.
@@ -121,6 +140,7 @@ config CPU_SUBTYPE_SH7751R
 	bool "Support SH7751R processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"
@@ -157,6 +177,11 @@ config CPU_SUBTYPE_SH7780
 	select CPU_SH4A
 	select CPU_HAS_INTC2_IRQ
 
+config CPU_SUBTYPE_SH7785
+	bool "Support SH7785 processor"
+	select CPU_SH4A
+	select CPU_HAS_INTC2_IRQ
+
 comment "SH4AL-DSP Processor Support"
 
 config CPU_SUBTYPE_SH73180
@@ -216,13 +241,22 @@ config MEMORY_SIZE
 
 config 32BIT
 	bool "Support 32-bit physical addressing through PMB"
-	depends on CPU_SH4A && MMU
+	depends on CPU_SH4A && MMU && (!X2TLB || BROKEN)
 	default y
 	help
 	  If you say Y here, physical addressing will be extended to
 	  32-bits through the SH-4A PMB. If this is not set, legacy
 	  29-bit physical addressing will be used.
 
+config X2TLB
+	bool "Enable extended TLB mode"
+	depends on CPU_SUBTYPE_SH7785 && MMU && EXPERIMENTAL
+	help
+	  Selecting this option will enable the extended mode of the SH-X2
+	  TLB. For legacy SH-X behaviour and interoperability, say N. For
+	  all of the fun new features and a willingless to submit bug reports,
+	  say Y.
+
 config VSYSCALL
 	bool "Support vsyscall page"
 	depends on MMU
@@ -237,16 +271,52 @@ config VSYSCALL
 	  (the default value) say Y.
 
 choice
+	prompt "Kernel page size"
+	default PAGE_SIZE_4KB
+
+config PAGE_SIZE_4KB
+	bool "4kB"
+	help
+	  This is the default page size used by all SuperH CPUs.
+
+config PAGE_SIZE_8KB
+	bool "8kB"
+	depends on EXPERIMENTAL && X2TLB
+	help
+	  This enables 8kB pages as supported by SH-X2 and later MMUs.
+
+config PAGE_SIZE_64KB
+	bool "64kB"
+	depends on EXPERIMENTAL && CPU_SH4
+	help
+	  This enables support for 64kB pages, possible on all SH-4
+	  CPUs and later. Highly experimental, not recommended.
+
+endchoice
+
+choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && CPU_SH4 && MMU
 	default HUGETLB_PAGE_SIZE_64K
 
 config HUGETLB_PAGE_SIZE_64K
-	bool "64K"
+	bool "64kB"
+
+config HUGETLB_PAGE_SIZE_256K
+	bool "256kB"
+	depends on X2TLB
 
 config HUGETLB_PAGE_SIZE_1MB
 	bool "1MB"
 
+config HUGETLB_PAGE_SIZE_4MB
+	bool "4MB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_64MB
+	bool "64MB"
+	depends on X2TLB
+
 endchoice
 
 source "mm/Kconfig"
@@ -274,7 +344,6 @@ config SH_DIRECT_MAPPED
 
 config SH_WRITETHROUGH
 	bool "Use write-through caching"
-	default y if CPU_SH2
 	help
 	  Selecting this option will configure the caches in write-through
 	  mode, as opposed to the default write-back configuration.
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 2689cb2..6614033 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -5,6 +5,7 @@
  *
  * Released under the terms of the GNU GPL v2.0.
  */
+
 #include <linux/init.h>
 #include <linux/mm.h>
 
@@ -14,37 +15,43 @@
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
-/*
- * Calculate the OC address and set the way bit on the SH-2.
- *
- * We must have already jump_to_P2()'ed prior to calling this
- * function, since we rely on CCR manipulation to do the
- * Right Thing(tm).
- */
-unsigned long __get_oc_addr(unsigned long set, unsigned long way)
+void __flush_wback_region(void *start, int size)
 {
-	unsigned long ccr;
-
-	/*
-	 * On SH-2 the way bit isn't tracked in the address field
-	 * if we're doing address array access .. instead, we need
-	 * to manually switch out the way in the CCR.
-	 */
-	ccr = ctrl_inl(CCR);
-	ccr &= ~0x00c0;
-	ccr |= way << cpu_data->dcache.way_shift;
-
-	/*
-	 * Despite the number of sets being halved, we end up losing
-	 * the first 2 ways to OCRAM instead of the last 2 (if we're
-	 * 4-way). As a result, forcibly setting the W1 bit handily
-	 * bumps us up 2 ways.
-	 */
-	if (ccr & CCR_CACHE_ORA)
-		ccr |= 1 << (cpu_data->dcache.way_shift + 1);
-
-	ctrl_outl(ccr, CCR);
-
-	return CACHE_OC_ADDRESS_ARRAY | (set << cpu_data->dcache.entry_shift);
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		/* FIXME cache purge */
+		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+	}
+}
+
+void __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+	}
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+	}
 }
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index e48cc22..ae531af 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -11,12 +11,8 @@
  */
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <asm/addrspace.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
@@ -83,9 +79,9 @@ static void __init emit_cache_params(void)
  */
 
 /* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */
-#define MAX_P3_SEMAPHORES 16
+#define MAX_P3_MUTEXES 16
 
-struct semaphore p3map_sem[MAX_P3_SEMAPHORES];
+struct mutex p3map_mutex[MAX_P3_MUTEXES];
 
 void __init p3_cache_init(void)
 {
@@ -115,7 +111,7 @@ void __init p3_cache_init(void)
 		panic("%s failed.", __FUNCTION__);
 
 	for (i = 0; i < cpu_data->dcache.n_aliases; i++)
-		sema_init(&p3map_sem[i], 1);
+		mutex_init(&p3map_mutex[i]);
 }
 
 /*
@@ -229,7 +225,7 @@ static inline void flush_cache_4096(unsigned long start,
 	 */
 	if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) ||
 	    (start < CACHE_OC_ADDRESS_ARRAY))
-	    	exec_offset = 0x20000000;
+		exec_offset = 0x20000000;
 
 	local_irq_save(flags);
 	__flush_cache_4096(start | SH_CACHE_ASSOC,
@@ -250,7 +246,7 @@ void flush_dcache_page(struct page *page)
 
 		/* Loop all the D-cache */
 		n = cpu_data->dcache.n_aliases;
-		for (i = 0; i < n; i++, addr += PAGE_SIZE)
+		for (i = 0; i < n; i++, addr += 4096)
 			flush_cache_4096(addr, phys);
 	}
 
diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S
index 7b96425..8a70613 100644
--- a/arch/sh/mm/clear_page.S
+++ b/arch/sh/mm/clear_page.S
@@ -1,12 +1,12 @@
-/* $Id: clear_page.S,v 1.13 2003/08/25 17:03:10 lethal Exp $
- *
+/*
  * __clear_user_page, __clear_user, clear_page implementation of SuperH
  *
  * Copyright (C) 2001  Kaz Kojima
  * Copyright (C) 2001, 2002  Niibe Yutaka
- *
+ * Copyright (C) 2006  Paul Mundt
  */
 #include <linux/linkage.h>
+#include <asm/page.h>
 
 /*
  * clear_page_slow
@@ -18,11 +18,11 @@
 /*
  * r0 --- scratch
  * r4 --- to
- * r5 --- to + 4096
+ * r5 --- to + PAGE_SIZE
  */
 ENTRY(clear_page_slow)
 	mov	r4,r5
-	mov.w	.Llimit,r0
+	mov.l	.Llimit,r0
 	add	r0,r5
 	mov	#0,r0
 	!
@@ -50,7 +50,7 @@ ENTRY(clear_page_slow)
 	!
 	rts
 	 nop
-.Llimit:	.word	(4096-28)
+.Llimit:	.long	(PAGE_SIZE-28)
 
 ENTRY(__clear_user)
 	!
@@ -164,10 +164,10 @@ ENTRY(__clear_user)
  * r0 --- scratch 
  * r4 --- to
  * r5 --- orig_to
- * r6 --- to + 4096
+ * r6 --- to + PAGE_SIZE
  */
 ENTRY(__clear_user_page)
-	mov.w	.L4096,r0
+	mov.l	.Lpsz,r0
 	mov	r4,r6
 	add	r0,r6
 	mov	#0,r0
@@ -191,7 +191,7 @@ ENTRY(__clear_user_page)
 	!
 	rts
 	 nop
-.L4096:	.word	4096
+.Lpsz:	.long	PAGE_SIZE
 
 #endif
 
diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S
index 1addffe..397c94c 100644
--- a/arch/sh/mm/copy_page.S
+++ b/arch/sh/mm/copy_page.S
@@ -1,12 +1,12 @@
-/* $Id: copy_page.S,v 1.8 2003/08/25 17:03:10 lethal Exp $
- *
+/*
  * copy_page, __copy_user_page, __copy_user implementation of SuperH
  *
  * Copyright (C) 2001  Niibe Yutaka & Kaz Kojima
  * Copyright (C) 2002  Toshinobu Sugioka
- *
+ * Copyright (C) 2006  Paul Mundt
  */
 #include <linux/linkage.h>
+#include <asm/page.h>
 
 /*
  * copy_page_slow
@@ -18,7 +18,7 @@
 
 /*
  * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch 
- * r8 --- from + 4096
+ * r8 --- from + PAGE_SIZE
  * r9 --- not used
  * r10 --- to
  * r11 --- from
@@ -30,7 +30,7 @@ ENTRY(copy_page_slow)
 	mov	r4,r10
 	mov	r5,r11
 	mov	r5,r8
-	mov.w	.L4096,r0
+	mov.l	.Lpsz,r0
 	add	r0,r8
 	!
 1:	mov.l	@r11+,r0
@@ -80,7 +80,7 @@ ENTRY(copy_page_slow)
 
 /*
  * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch 
- * r8 --- from + 4096
+ * r8 --- from + PAGE_SIZE
  * r9 --- orig_to
  * r10 --- to
  * r11 --- from
@@ -94,7 +94,7 @@ ENTRY(__copy_user_page)
 	mov	r5,r11
 	mov	r6,r9
 	mov	r5,r8
-	mov.w	.L4096,r0
+	mov.l	.Lpsz,r0
 	add	r0,r8
 	!
 1:	ocbi	@r9
@@ -129,7 +129,7 @@ ENTRY(__copy_user_page)
 	rts
 	 nop
 #endif
-.L4096:	.word	4096
+.Lpsz:	.long	PAGE_SIZE
 /*
  * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
  * Return the number of bytes NOT copied
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 68663b8..716ebf5 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -26,13 +26,19 @@ extern void die(const char *,struct pt_regs *,long);
  * and the problem, and then passes it off to one of the appropriate
  * routines.
  */
-asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
-			      unsigned long address)
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
+					unsigned long writeaccess,
+					unsigned long address)
 {
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
 	unsigned long page;
+	int si_code;
+	siginfo_t info;
+
+	trace_hardirqs_on();
+	local_irq_enable();
 
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
@@ -41,6 +47,46 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 
 	tsk = current;
 	mm = tsk->mm;
+	si_code = SEGV_MAPERR;
+
+	if (unlikely(address >= TASK_SIZE)) {
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Do _not_ use "tsk" here. We might be inside
+		 * an interrupt in the middle of a task switch..
+		 */
+		int offset = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+
+		pgd = get_TTB() + offset;
+		pgd_k = swapper_pg_dir + offset;
+
+		/* This will never happen with the folded page table. */
+		if (!pgd_present(*pgd)) {
+			if (!pgd_present(*pgd_k))
+				goto bad_area_nosemaphore;
+			set_pgd(pgd, *pgd_k);
+			return;
+		}
+
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (pud_present(*pud) || !pud_present(*pud_k))
+			goto bad_area_nosemaphore;
+		set_pud(pud, *pud_k);
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+		if (pmd_present(*pmd) || !pmd_present(*pmd_k))
+			goto bad_area_nosemaphore;
+		set_pmd(pmd, *pmd_k);
+
+		return;
+	}
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -65,6 +111,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
  * we can handle it..
  */
 good_area:
+	si_code = SEGV_ACCERR;
 	if (writeaccess) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
@@ -104,10 +151,13 @@ survive:
 bad_area:
 	up_read(&mm->mmap_sem);
 
+bad_area_nosemaphore:
 	if (user_mode(regs)) {
-		tsk->thread.address = address;
-		tsk->thread.error_code = writeaccess;
-		force_sig(SIGSEGV, tsk);
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		info.si_code = si_code;
+		info.si_addr = (void *) address;
+		force_sig_info(SIGSEGV, &info, tsk);
 		return;
 	}
 
@@ -127,11 +177,9 @@ no_context:
 		printk(KERN_ALERT "Unable to handle kernel paging request");
 	printk(" at virtual address %08lx\n", address);
 	printk(KERN_ALERT "pc = %08lx\n", regs->pc);
-	asm volatile("mov.l	%1, %0"
-		     : "=r" (page)
-		     : "m" (__m(MMU_TTB)));
+	page = (unsigned long)get_TTB();
 	if (page) {
-		page = ((unsigned long *) page)[address >> 22];
+		page = ((unsigned long *) page)[address >> PGDIR_SHIFT];
 		printk(KERN_ALERT "*pde = %08lx\n", page);
 		if (page & _PAGE_PRESENT) {
 			page &= PAGE_MASK;
@@ -166,98 +214,13 @@ do_sigbus:
 	 * Send a sigbus, regardless of whether we were in kernel
 	 * or user mode.
 	 */
-	tsk->thread.address = address;
-	tsk->thread.error_code = writeaccess;
-	tsk->thread.trap_no = 14;
-	force_sig(SIGBUS, tsk);
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void *)address;
+	force_sig_info(SIGBUS, &info, tsk);
 
 	/* Kernel mode? Handle exceptions or die */
 	if (!user_mode(regs))
 		goto no_context;
 }
-
-#ifdef CONFIG_SH_STORE_QUEUES
-/*
- * This is a special case for the SH-4 store queues, as pages for this
- * space still need to be faulted in before it's possible to flush the
- * store queue cache for writeout to the remapped region.
- */
-#define P3_ADDR_MAX		(P4SEG_STORE_QUE + 0x04000000)
-#else
-#define P3_ADDR_MAX		P4SEG
-#endif
-
-/*
- * Called with interrupts disabled.
- */
-asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
-					 unsigned long writeaccess,
-					 unsigned long address)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	pte_t entry;
-	struct mm_struct *mm = current->mm;
-	spinlock_t *ptl;
-	int ret = 1;
-
-#ifdef CONFIG_SH_KGDB
-	if (kgdb_nofault && kgdb_bus_err_hook)
-		kgdb_bus_err_hook();
-#endif
-
-	/*
-	 * We don't take page faults for P1, P2, and parts of P4, these
-	 * are always mapped, whether it be due to legacy behaviour in
-	 * 29-bit mode, or due to PMB configuration in 32-bit mode.
-	 */
-	if (address >= P3SEG && address < P3_ADDR_MAX) {
-		pgd = pgd_offset_k(address);
-		mm = NULL;
-	} else {
-		if (unlikely(address >= TASK_SIZE || !mm))
-			return 1;
-
-		pgd = pgd_offset(mm, address);
-	}
-
-	pud = pud_offset(pgd, address);
-	if (pud_none_or_clear_bad(pud))
-		return 1;
-	pmd = pmd_offset(pud, address);
-	if (pmd_none_or_clear_bad(pmd))
-		return 1;
-
-	if (mm)
-		pte = pte_offset_map_lock(mm, pmd, address, &ptl);
-	else
-		pte = pte_offset_kernel(pmd, address);
-
-	entry = *pte;
-	if (unlikely(pte_none(entry) || pte_not_present(entry)))
-		goto unlock;
-	if (unlikely(writeaccess && !pte_write(entry)))
-		goto unlock;
-
-	if (writeaccess)
-		entry = pte_mkdirty(entry);
-	entry = pte_mkyoung(entry);
-
-#ifdef CONFIG_CPU_SH4
-	/*
-	 * ITLB is not affected by "ldtlb" instruction.
-	 * So, we need to flush the entry by ourselves.
-	 */
-	__flush_tlb_page(get_asid(), address & PAGE_MASK);
-#endif
-
-	set_pte(pte, entry);
-	update_mmu_cache(NULL, address, entry);
-	ret = 0;
-unlock:
-	if (mm)
-		pte_unmap_unlock(pte, ptl);
-	return ret;
-}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 7154d1c..59f4cc1 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -84,30 +84,22 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 	pmd_t *pmd;
 	pte_t *pte;
 
-	pgd = swapper_pg_dir + pgd_index(addr);
+	pgd = pgd_offset_k(addr);
 	if (pgd_none(*pgd)) {
 		pgd_ERROR(*pgd);
 		return;
 	}
 
-	pud = pud_offset(pgd, addr);
-	if (pud_none(*pud)) {
-		pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC);
-		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER));
-		if (pmd != pmd_offset(pud, 0)) {
-			pud_ERROR(*pud);
-			return;
-		}
+	pud = pud_alloc(NULL, pgd, addr);
+	if (unlikely(!pud)) {
+		pud_ERROR(*pud);
+		return;
 	}
 
-	pmd = pmd_offset(pud, addr);
-	if (pmd_none(*pmd)) {
-		pte = (pte_t *)get_zeroed_page(GFP_ATOMIC);
-		set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
-		if (pte != pte_offset_kernel(pmd, 0)) {
-			pmd_ERROR(*pmd);
-			return;
-		}
+	pmd = pmd_alloc(NULL, pud, addr);
+	if (unlikely(!pmd)) {
+		pmd_ERROR(*pmd);
+		return;
 	}
 
 	pte = pte_offset_kernel(pmd, addr);
@@ -155,9 +147,6 @@ extern char __init_begin, __init_end;
 
 /*
  * paging_init() sets up the page tables
- *
- * This routines also unmaps the page at virtual kernel address 0, so
- * that we can trap those pesky NULL-reference errors in the kernel.
  */
 void __init paging_init(void)
 {
@@ -180,14 +169,11 @@ void __init paging_init(void)
 	 */
 	{
 		unsigned long max_dma, low, start_pfn;
-		pgd_t *pg_dir;
-		int i;
-
-		/* We don't need kernel mapping as hardware support that. */
-		pg_dir = swapper_pg_dir;
 
-		for (i = 0; i < PTRS_PER_PGD; i++)
-			pgd_val(pg_dir[i]) = 0;
+		/* We don't need to map the kernel through the TLB, as
+		 * it is permanatly mapped using P1. So clear the
+		 * entire pgd. */
+		memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
 
 		/* Turn on the MMU */
 		enable_mmu();
@@ -206,6 +192,10 @@ void __init paging_init(void)
 		}
 	}
 
+	/* Set an initial value for the MMU.TTB so we don't have to
+	 * check for a null value. */
+	set_TTB(swapper_pg_dir);
+
 #elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
 	/*
 	 * If we don't have CONFIG_MMU set and the processor in question
@@ -227,7 +217,6 @@ static struct kcore_list kcore_mem, kcore_vmalloc;
 
 void __init mem_init(void)
 {
-	extern unsigned long empty_zero_page[1024];
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
 	extern unsigned long memory_start;
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index a9fe80c..11d54c1 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -28,9 +28,7 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address,
 {
 	unsigned long end;
 	unsigned long pfn;
-	pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW |
-				   _PAGE_DIRTY | _PAGE_ACCESSED |
-				   _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | flags);
+	pgprot_t pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
 
 	address &= ~PMD_MASK;
 	end = address + size;
diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c
index 1406d2e..bb23679 100644
--- a/arch/sh/mm/pg-dma.c
+++ b/arch/sh/mm/pg-dma.c
@@ -39,8 +39,6 @@ static void copy_page_dma(void *to, void *from)
 
 static void clear_page_dma(void *to)
 {
-	extern unsigned long empty_zero_page[1024];
-
 	/*
 	 * We get invoked quite early on, if the DMAC hasn't been initialized
 	 * yet, fall back on the slow manual implementation.
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 07371ed..3f98d2a 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -6,22 +6,12 @@
  *
  * Released under the terms of the GNU GPL v2.0.
  */
-#include <linux/init.h>
-#include <linux/mman.h>
 #include <linux/mm.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
+#include <linux/mutex.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-extern struct semaphore p3map_sem[];
+extern struct mutex p3map_mutex[];
 
 #define CACHE_ALIAS (cpu_data->dcache.alias_mask)
 
@@ -37,10 +27,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		clear_page(to);
 	else {
-		pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
-					   _PAGE_RW | _PAGE_CACHABLE |
-					   _PAGE_DIRTY | _PAGE_ACCESSED |
-					   _PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
 		unsigned long phys_addr = PHYSADDR(to);
 		unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
 		pgd_t *pgd = pgd_offset_k(p3_addr);
@@ -50,8 +36,8 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 		pte_t entry;
 		unsigned long flags;
 
-		entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot);
-		down(&p3map_sem[(address & CACHE_ALIAS)>>12]);
+		entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL);
+		mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
 		set_pte(pte, entry);
 		local_irq_save(flags);
 		__flush_tlb_page(get_asid(), p3_addr);
@@ -59,7 +45,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 		update_mmu_cache(NULL, p3_addr, entry);
 		__clear_user_page((void *)p3_addr, to);
 		pte_clear(&init_mm, p3_addr, pte);
-		up(&p3map_sem[(address & CACHE_ALIAS)>>12]);
+		mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
 	}
 }
 
@@ -77,10 +63,6 @@ void copy_user_page(void *to, void *from, unsigned long address,
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		copy_page(to, from);
 	else {
-		pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
-					   _PAGE_RW | _PAGE_CACHABLE |
-					   _PAGE_DIRTY | _PAGE_ACCESSED |
-					   _PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
 		unsigned long phys_addr = PHYSADDR(to);
 		unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
 		pgd_t *pgd = pgd_offset_k(p3_addr);
@@ -90,8 +72,8 @@ void copy_user_page(void *to, void *from, unsigned long address,
 		pte_t entry;
 		unsigned long flags;
 
-		entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot);
-		down(&p3map_sem[(address & CACHE_ALIAS)>>12]);
+		entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL);
+		mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
 		set_pte(pte, entry);
 		local_irq_save(flags);
 		__flush_tlb_page(get_asid(), p3_addr);
@@ -99,7 +81,7 @@ void copy_user_page(void *to, void *from, unsigned long address,
 		update_mmu_cache(NULL, p3_addr, entry);
 		__copy_user_page((void *)p3_addr, from, to);
 		pte_clear(&init_mm, p3_addr, pte);
-		up(&p3map_sem[(address & CACHE_ALIAS)>>12]);
+		mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
 	}
 }
 
@@ -122,4 +104,3 @@ inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t
 	}
 	return pte;
 }
-
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index ac57638..0571755 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -30,3 +30,5 @@ R7780MP			SH_R7780MP
 TITAN			SH_TITAN
 SHMIN			SH_SHMIN
 7710VOIPGW		SH_7710VOIPGW
+7206SE			SH_7206_SOLUTION_ENGINE
+7619SE			SH_7619_SOLUTION_ENGINE
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index cfcc3ca..3b5f19e 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -775,7 +775,7 @@ static int sci_notifier(struct notifier_block *self,
 			 *
 			 * Clean this up later..
 			 */
-			clk = clk_get("module_clk");
+			clk = clk_get(NULL, "module_clk");
 			port->uartclk = clk_get_rate(clk) * 16;
 			clk_put(clk);
 		}
@@ -960,7 +960,7 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
 		default:
 		{
 #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
-			struct clk *clk = clk_get("module_clk");
+			struct clk *clk = clk_get(NULL, "module_clk");
 			t = SCBRR_VALUE(baud, clk_get_rate(clk));
 			clk_put(clk);
 #else
@@ -1128,7 +1128,7 @@ static void __init sci_init_ports(void)
 		 * XXX: We should use a proper SCI/SCIF clock
 		 */
 		{
-			struct clk *clk = clk_get("module_clk");
+			struct clk *clk = clk_get(NULL, "module_clk");
 			sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
 			clk_put(clk);
 		}
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 7ee9921..e4557cc 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,6 +133,20 @@
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
+# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
+# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
+# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
+# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
+# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -365,6 +379,7 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
@@ -544,6 +559,28 @@ static inline int sci_rxd_in(struct uart_port *port)
 	if (port->mapbase == 0xffe10000)
 		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfffe8000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe8800)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe9000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe9800)
+		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xf8400000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xf8410000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xf8420000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
 #endif
 
 /*
diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h
index 8bdc1ba..28305c3 100644
--- a/include/asm-sh/atomic.h
+++ b/include/asm-sh/atomic.h
@@ -28,11 +28,11 @@ static inline void atomic_add(int i, atomic_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_add	\n"
-"	add	%2, %0				\n"
-"	movco.l	%0, @%3				\n"
+"1:	movli.l @%2, %0		! atomic_add	\n"
+"	add	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
 "	bf	1b				\n"
-	: "=&z" (tmp), "=r" (&v->counter)
+	: "=&z" (tmp)
 	: "r" (i), "r" (&v->counter)
 	: "t");
 #else
@@ -50,11 +50,11 @@ static inline void atomic_sub(int i, atomic_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_sub	\n"
-"	sub	%2, %0				\n"
-"	movco.l	%0, @%3				\n"
+"1:	movli.l @%2, %0		! atomic_sub	\n"
+"	sub	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
 "	bf	1b				\n"
-	: "=&z" (tmp), "=r" (&v->counter)
+	: "=&z" (tmp)
 	: "r" (i), "r" (&v->counter)
 	: "t");
 #else
@@ -80,12 +80,12 @@ static inline int atomic_add_return(int i, atomic_t *v)
 
 #ifdef CONFIG_CPU_SH4A
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_add_return	\n"
-"	add	%2, %0					\n"
-"	movco.l	%0, @%3					\n"
+"1:	movli.l @%2, %0		! atomic_add_return	\n"
+"	add	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
 "	bf	1b					\n"
 "	synco						\n"
-	: "=&z" (temp), "=r" (&v->counter)
+	: "=&z" (temp)
 	: "r" (i), "r" (&v->counter)
 	: "t");
 #else
@@ -109,12 +109,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 #ifdef CONFIG_CPU_SH4A
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_sub_return	\n"
-"	sub	%2, %0					\n"
-"	movco.l	%0, @%3					\n"
+"1:	movli.l @%2, %0		! atomic_sub_return	\n"
+"	sub	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
 "	bf	1b					\n"
 "	synco						\n"
-	: "=&z" (temp), "=r" (&v->counter)
+	: "=&z" (temp)
 	: "r" (i), "r" (&v->counter)
 	: "t");
 #else
@@ -186,11 +186,11 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_clear_mask	\n"
-"	and	%2, %0					\n"
-"	movco.l	%0, @%3					\n"
+"1:	movli.l @%2, %0		! atomic_clear_mask	\n"
+"	and	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
 "	bf	1b					\n"
-	: "=&z" (tmp), "=r" (&v->counter)
+	: "=&z" (tmp)
 	: "r" (~mask), "r" (&v->counter)
 	: "t");
 #else
@@ -208,11 +208,11 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__ (
-"1:	movli.l @%3, %0		! atomic_set_mask	\n"
-"	or	%2, %0					\n"
-"	movco.l	%0, @%3					\n"
+"1:	movli.l @%2, %0		! atomic_set_mask	\n"
+"	or	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
 "	bf	1b					\n"
-	: "=&z" (tmp), "=r" (&v->counter)
+	: "=&z" (tmp)
 	: "r" (mask), "r" (&v->counter)
 	: "t");
 #else
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
index beeea40..795047d 100644
--- a/include/asm-sh/bugs.h
+++ b/include/asm-sh/bugs.h
@@ -23,16 +23,20 @@ static void __init check_bugs(void)
 	cpu_data->loops_per_jiffy = loops_per_jiffy;
 
 	switch (cpu_data->type) {
-	case CPU_SH7604:
+	case CPU_SH7604 ... CPU_SH7619:
 		*p++ = '2';
 		break;
+	case CPU_SH7206:
+		*p++ = '2';
+		*p++ = 'a';
+		break;
 	case CPU_SH7705 ... CPU_SH7300:
 		*p++ = '3';
 		break;
 	case CPU_SH7750 ... CPU_SH4_501:
 		*p++ = '4';
 		break;
-	case CPU_SH7770 ... CPU_SH7781:
+	case CPU_SH7770 ... CPU_SH7785:
 		*p++ = '4';
 		*p++ = 'a';
 		break;
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
index fdfb75b..1df9280 100644
--- a/include/asm-sh/clock.h
+++ b/include/asm-sh/clock.h
@@ -4,6 +4,7 @@
 #include <linux/kref.h>
 #include <linux/list.h>
 #include <linux/seq_file.h>
+#include <linux/clk.h>
 
 struct clk;
 
@@ -18,7 +19,7 @@ struct clk_ops {
 struct clk {
 	struct list_head	node;
 	const char		*name;
-
+	int			id;
 	struct module		*owner;
 
 	struct clk		*parent;
@@ -40,22 +41,13 @@ void arch_init_clk_ops(struct clk_ops **, int type);
 int clk_init(void);
 
 int __clk_enable(struct clk *);
-int clk_enable(struct clk *);
-
 void __clk_disable(struct clk *);
-void clk_disable(struct clk *);
 
-int clk_set_rate(struct clk *, unsigned long rate);
-unsigned long clk_get_rate(struct clk *);
 void clk_recalc_rate(struct clk *);
 
-struct clk *clk_get(const char *id);
-void clk_put(struct clk *);
-
 int clk_register(struct clk *);
 void clk_unregister(struct clk *);
 
 int show_clocks(struct seq_file *m);
 
 #endif /* __ASM_SH_CLOCK_H */
-
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
index cd96402..20b9796 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/include/asm-sh/cpu-sh2/cache.h
@@ -12,6 +12,7 @@
 
 #define L1_CACHE_SHIFT	4
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7604)
 #define CCR		0xfffffe92	/* Address of Cache Control Register */
 
 #define CCR_CACHE_CE	0x01	/* Cache enable */
@@ -27,5 +28,26 @@
 #define CCR_CACHE_ORA		CCR_CACHE_TW
 #define CCR_CACHE_WT		0x00	/* SH-2 is _always_ write-through */
 
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define CCR1		0xffffffec
+#define CCR		CCR1
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_WT	0x06    /* CCR[bit1=1,bit2=1] */
+				/* 0x00000000-0x7fffffff: Write-through  */
+				/* 0x80000000-0x9fffffff: Write-back     */
+                                /* 0xc0000000-0xdfffffff: Write-through  */
+#define CCR_CACHE_CB	0x00    /* CCR[bit1=0,bit2=0] */
+				/* 0x00000000-0x7fffffff: Write-back     */
+				/* 0x80000000-0x9fffffff: Write-through  */
+                                /* 0xc0000000-0xdfffffff: Write-back     */
+#define CCR_CACHE_CF	0x08	/* Cache invalidate */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_DATA_ARRAY	0xf1000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#endif
 #endif /* __ASM_CPU_SH2_CACHE_H */
 
diff --git a/include/asm-sh/cpu-sh2/freq.h b/include/asm-sh/cpu-sh2/freq.h
new file mode 100644
index 0000000..31de475
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/cpu-sh2/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_FREQ_H
+#define __ASM_CPU_SH2_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define FREQCR	0xf815ff80
+#endif
+
+#endif /* __ASM_CPU_SH2_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/include/asm-sh/cpu-sh2/mmu_context.h
new file mode 100644
index 0000000..beeb299
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/mmu_context.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2/mmu_context.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
+#define __ASM_CPU_SH2_MMU_CONTEXT_H
+
+/* No MMU */
+
+#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
+
diff --git a/include/asm-sh/cpu-sh2/timer.h b/include/asm-sh/cpu-sh2/timer.h
new file mode 100644
index 0000000..a39c241
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/timer.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_CPU_SH2_TIMER_H
+#define __ASM_CPU_SH2_TIMER_H
+
+/* Nothing needed yet */
+
+#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
new file mode 100644
index 0000000..3d2e9aa
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/addrspace.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/addrspace.h>
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h
new file mode 100644
index 0000000..3e4b9e4
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/cache.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-sh/cpu-sh2a/cache.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_CACHE_H
+#define __ASM_CPU_SH2A_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define CCR1		0xfffc1000
+#define CCR2		0xfffc1004
+
+/* CCR1 behaves more like the traditional CCR */
+#define CCR		CCR1
+
+/*
+ * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
+ * listed here are reserved.
+ */
+#define CCR_CACHE_CB	0x0000	/* Hack */
+#define CCR_CACHE_OCE	0x0001
+#define CCR_CACHE_WT	0x0002
+#define CCR_CACHE_OCI	0x0008	/* OCF */
+#define CCR_CACHE_ICE	0x0100
+#define CCR_CACHE_ICI	0x0800	/* ICF */
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
+
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+
+#endif /* __ASM_CPU_SH2A_CACHE_H */
+
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
new file mode 100644
index 0000000..fa3186c
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/cacheflush.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
new file mode 100644
index 0000000..0d5ad85
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/dma.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/include/asm-sh/cpu-sh2a/freq.h
new file mode 100644
index 0000000..e518fff
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/cpu-sh2a/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_FREQ_H
+#define __ASM_CPU_SH2A_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7206)
+#define FREQCR	0xfffe0010
+#endif
+
+#endif /* __ASM_CPU_SH2A_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
new file mode 100644
index 0000000..cd2387f
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/mmu_context.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
new file mode 100644
index 0000000..fee504a
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/timer.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
new file mode 100644
index 0000000..cf28062
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/ubc.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
new file mode 100644
index 0000000..c1b3e24
--- /dev/null
+++ b/include/asm-sh/cpu-sh2a/watchdog.h
@@ -0,0 +1 @@
+#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
index d9daa02..faf3051 100644
--- a/include/asm-sh/dma.h
+++ b/include/asm-sh/dma.h
@@ -14,9 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/wait.h>
 #include <linux/sysdev.h>
-#include <linux/device.h>
 #include <asm/cpu/dma.h>
-#include <asm/semaphore.h>
 
 /* The maximum address that we can perform a DMA transfer to on this platform */
 /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
@@ -46,16 +44,21 @@
  * DMAC (dma_info) flags
  */
 enum {
-	DMAC_CHANNELS_CONFIGURED	= 0x00,
-	DMAC_CHANNELS_TEI_CAPABLE	= 0x01,
+	DMAC_CHANNELS_CONFIGURED	= 0x01,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
 };
 
 /*
  * DMA channel capabilities / flags
  */
 enum {
-	DMA_TEI_CAPABLE			= 0x01,
-	DMA_CONFIGURED			= 0x02,
+	DMA_CONFIGURED			= 0x01,
+
+	/*
+	 * Transfer end interrupt, inherited from DMAC.
+	 * wait_queue used in dma_wait_for_completion.
+	 */
+	DMA_TEI_CAPABLE			= 0x02,
 };
 
 extern spinlock_t dma_spin_lock;
@@ -68,28 +71,31 @@ struct dma_ops {
 
 	int (*get_residue)(struct dma_channel *chan);
 	int (*xfer)(struct dma_channel *chan);
-	void (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
 };
 
 struct dma_channel {
-	char dev_id[16];
+	char dev_id[16];		/* unique name per DMAC of channel */
 
-	unsigned int chan;		/* Physical channel number */
+	unsigned int chan;		/* DMAC channel number */
 	unsigned int vchan;		/* Virtual channel number */
+
 	unsigned int mode;
 	unsigned int count;
 
 	unsigned long sar;
 	unsigned long dar;
 
+	const char **caps;
+
 	unsigned long flags;
 	atomic_t busy;
 
-	struct semaphore sem;
 	wait_queue_head_t wait_queue;
 
 	struct sys_device dev;
-	char *name;
+	void *priv_data;
 };
 
 struct dma_info {
@@ -103,6 +109,12 @@ struct dma_info {
 	struct dma_channel *channels;
 
 	struct list_head list;
+	int first_channel_nr;
+};
+
+struct dma_chan_caps {
+	int ch_num;
+	const char **caplist;
 };
 
 #define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
@@ -121,6 +133,8 @@ extern int dma_xfer(unsigned int chan, unsigned long from,
 #define dma_read_page(chan, from, to)	\
 	dma_read(chan, from, to, PAGE_SIZE)
 
+extern int request_dma_bycap(const char **dmac, const char **caps,
+			     const char *dev_id);
 extern int request_dma(unsigned int chan, const char *dev_id);
 extern void free_dma(unsigned int chan);
 extern int get_dma_residue(unsigned int chan);
@@ -131,6 +145,10 @@ extern void dma_configure_channel(unsigned int chan, unsigned long flags);
 
 extern int register_dmac(struct dma_info *info);
 extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
 
 #ifdef CONFIG_SYSFS
 /* arch/sh/drivers/dma/dma-sysfs.c */
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
index fc050fd..43ca244 100644
--- a/include/asm-sh/elf.h
+++ b/include/asm-sh/elf.h
@@ -74,7 +74,7 @@ typedef struct user_fpu_struct elf_fpregset_t;
 #define ELF_ARCH	EM_SH
 
 #define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
    use of this is to invoke "./ld.so someprog" to test out a new version of
diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S
new file mode 100644
index 0000000..500030e
--- /dev/null
+++ b/include/asm-sh/entry-macros.S
@@ -0,0 +1,33 @@
+! entry.S macro define
+	
+	.macro	cli
+	stc	sr, r0
+	or	#0xf0, r0
+	ldc	r0, sr
+	.endm
+
+	.macro	sti
+	mov	#0xf0, r11
+	extu.b	r11, r11
+	not	r11, r11
+	stc	sr, r10
+	and	r11, r10
+#ifdef CONFIG_HAS_SR_RB
+	stc	k_g_imask, r11
+	or	r11, r10
+#endif
+	ldc	r10, sr
+	.endm
+
+	.macro	get_current_thread_info, ti, tmp
+#ifdef CONFIG_HAS_SR_RB
+	stc	r7_bank, \ti
+#else
+	mov	#((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
+	shll8	\tmp
+	shll2	\tmp
+	mov	r15, \ti
+	and	\tmp, \ti
+#endif	
+	.endm
+
diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h
deleted file mode 100644
index b28af9a..0000000
--- a/include/asm-sh/irq-sh73180.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef __ASM_SH_IRQ_SH73180_H
-#define __ASM_SH_IRQ_SH73180_H
-
-/*
- * linux/include/asm-sh/irq-sh73180.h
- *
- * Copyright (C) 2004 Takashi SHUDO <shudo@hitachi-ul.co.jp>
- */
-
-#undef INTC_IPRA
-#undef INTC_IPRB
-#undef INTC_IPRC
-#undef INTC_IPRD
-
-#undef DMTE0_IRQ
-#undef DMTE1_IRQ
-#undef DMTE2_IRQ
-#undef DMTE3_IRQ
-#undef DMTE4_IRQ
-#undef DMTE5_IRQ
-#undef DMTE6_IRQ
-#undef DMTE7_IRQ
-#undef DMAE_IRQ
-#undef DMA_IPR_ADDR
-#undef DMA_IPR_POS
-#undef DMA_PRIORITY
-
-#undef INTC_IMCR0
-#undef INTC_IMCR1
-#undef INTC_IMCR2
-#undef INTC_IMCR3
-#undef INTC_IMCR4
-#undef INTC_IMCR5
-#undef INTC_IMCR6
-#undef INTC_IMCR7
-#undef INTC_IMCR8
-#undef INTC_IMCR9
-#undef INTC_IMCR10
-
-
-#define INTC_IPRA  	0xA4080000UL
-#define INTC_IPRB  	0xA4080004UL
-#define INTC_IPRC  	0xA4080008UL
-#define INTC_IPRD  	0xA408000CUL
-#define INTC_IPRE  	0xA4080010UL
-#define INTC_IPRF  	0xA4080014UL
-#define INTC_IPRG  	0xA4080018UL
-#define INTC_IPRH  	0xA408001CUL
-#define INTC_IPRI  	0xA4080020UL
-#define INTC_IPRJ  	0xA4080024UL
-#define INTC_IPRK  	0xA4080028UL
-
-#define INTC_IMR0	0xA4080080UL
-#define INTC_IMR1	0xA4080084UL
-#define INTC_IMR2	0xA4080088UL
-#define INTC_IMR3	0xA408008CUL
-#define INTC_IMR4	0xA4080090UL
-#define INTC_IMR5	0xA4080094UL
-#define INTC_IMR6	0xA4080098UL
-#define INTC_IMR7	0xA408009CUL
-#define INTC_IMR8	0xA40800A0UL
-#define INTC_IMR9	0xA40800A4UL
-#define INTC_IMR10	0xA40800A8UL
-#define INTC_IMR11	0xA40800ACUL
-
-#define INTC_IMCR0	0xA40800C0UL
-#define INTC_IMCR1	0xA40800C4UL
-#define INTC_IMCR2	0xA40800C8UL
-#define INTC_IMCR3	0xA40800CCUL
-#define INTC_IMCR4	0xA40800D0UL
-#define INTC_IMCR5	0xA40800D4UL
-#define INTC_IMCR6	0xA40800D8UL
-#define INTC_IMCR7	0xA40800DCUL
-#define INTC_IMCR8	0xA40800E0UL
-#define INTC_IMCR9	0xA40800E4UL
-#define INTC_IMCR10	0xA40800E8UL
-#define INTC_IMCR11	0xA40800ECUL
-
-#define INTC_ICR0	0xA4140000UL
-#define INTC_ICR1	0xA414001CUL
-
-#define INTMSK0		0xa4140044
-#define INTMSKCLR0	0xa4140064
-#define INTC_INTPRI0	0xa4140010
-
-/*
-  NOTE:
-
-  *_IRQ = (INTEVT2 - 0x200)/0x20
-*/
-
-/* TMU0 */
-#define TMU0_IRQ	16
-#define TMU0_IPR_ADDR	INTC_IPRA
-#define TMU0_IPR_POS	 3
-#define TMU0_PRIORITY	 2
-
-#define TIMER_IRQ       16
-#define TIMER_IPR_ADDR  INTC_IPRA
-#define TIMER_IPR_POS    3
-#define TIMER_PRIORITY   2
-
-/* TMU1 */
-#define TMU1_IRQ	17
-#define TMU1_IPR_ADDR	INTC_IPRA
-#define TMU1_IPR_POS	 2
-#define TMU1_PRIORITY	 2
-
-/* TMU2 */
-#define TMU2_IRQ	18
-#define TMU2_IPR_ADDR	INTC_IPRA
-#define TMU2_IPR_POS	 1
-#define TMU2_PRIORITY	 2
-
-/* LCDC */
-#define LCDC_IRQ	28
-#define LCDC_IPR_ADDR	INTC_IPRB
-#define LCDC_IPR_POS	 2
-#define LCDC_PRIORITY	 2
-
-/* VIO (Video I/O) */
-#define CEU_IRQ		52
-#define BEU_IRQ		53
-#define VEU_IRQ		54
-#define VOU_IRQ		55
-#define VIO_IPR_ADDR	INTC_IPRE
-#define VIO_IPR_POS	 2
-#define VIO_PRIORITY	 2
-
-/* MFI (Multi Functional Interface) */
-#define MFI_IRQ		56
-#define MFI_IPR_ADDR	INTC_IPRE
-#define MFI_IPR_POS	 1
-#define MFI_PRIORITY	 2
-
-/* VPU (Video Processing Unit) */
-#define VPU_IRQ		60
-#define VPU_IPR_ADDR	INTC_IPRE
-#define VPU_IPR_POS	 0
-#define VPU_PRIORITY	 2
-
-/* 3DG */
-#define TDG_IRQ		63
-#define TDG_IPR_ADDR	INTC_IPRJ
-#define TDG_IPR_POS	 2
-#define TDG_PRIORITY	 2
-
-/* DMAC(1) */
-#define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
-#define DMA1_IPR_ADDR	INTC_IPRE
-#define DMA1_IPR_POS	3
-#define DMA1_PRIORITY	7
-
-/* DMAC(2) */
-#define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#define DMA2_IPR_ADDR	INTC_IPRF
-#define DMA2_IPR_POS	2
-#define DMA2_PRIORITY	7
-
-/* SCIF0 */
-#define SCIF_ERI_IRQ	80
-#define SCIF_RXI_IRQ	81
-#define SCIF_BRI_IRQ	82
-#define SCIF_TXI_IRQ	83
-#define SCIF_IPR_ADDR	INTC_IPRG
-#define SCIF_IPR_POS	3
-#define SCIF_PRIORITY	3
-
-/* SIOF0 */
-#define SIOF0_IRQ	84
-#define SIOF0_IPR_ADDR	INTC_IPRH
-#define SIOF0_IPR_POS	3
-#define SIOF0_PRIORITY	3
-
-/* FLCTL (Flash Memory Controller) */
-#define FLSTE_IRQ	92
-#define FLTEND_IRQ	93
-#define FLTRQ0_IRQ	94
-#define FLTRQ1_IRQ	95
-#define FLCTL_IPR_ADDR	INTC_IPRH
-#define FLCTL_IPR_POS	1
-#define FLCTL_PRIORITY	3
-
-/* IIC(0) (IIC Bus Interface) */
-#define IIC0_ALI_IRQ	96
-#define IIC0_TACKI_IRQ	97
-#define IIC0_WAITI_IRQ	98
-#define IIC0_DTEI_IRQ	99
-#define IIC0_IPR_ADDR	INTC_IPRH
-#define IIC0_IPR_POS	0
-#define IIC0_PRIORITY	3
-
-/* IIC(1) (IIC Bus Interface) */
-#define IIC1_ALI_IRQ	44
-#define IIC1_TACKI_IRQ	45
-#define IIC1_WAITI_IRQ	46
-#define IIC1_DTEI_IRQ	47
-#define IIC1_IPR_ADDR	INTC_IPRG
-#define IIC1_IPR_POS	0
-#define IIC1_PRIORITY	3
-
-/* SIO0 */
-#define SIO0_IRQ	88
-#define SIO0_IPR_ADDR	INTC_IPRI
-#define SIO0_IPR_POS	3
-#define SIO0_PRIORITY	3
-
-/* SDHI */
-#define SDHI_SDHII0_IRQ	100
-#define SDHI_SDHII1_IRQ	101
-#define SDHI_SDHII2_IRQ	102
-#define SDHI_SDHII3_IRQ	103
-#define SDHI_IPR_ADDR	INTC_IPRK
-#define SDHI_IPR_POS	0
-#define SDHI_PRIORITY	3
-
-/* SIU (Sound Interface Unit) */
-#define SIU_IRQ		108
-#define SIU_IPR_ADDR	INTC_IPRJ
-#define SIU_IPR_POS	1
-#define SIU_PRIORITY	3
-
-#define PORT_PACR	0xA4050100UL
-#define PORT_PBCR	0xA4050102UL
-#define PORT_PCCR	0xA4050104UL
-#define PORT_PDCR	0xA4050106UL
-#define PORT_PECR	0xA4050108UL
-#define PORT_PFCR	0xA405010AUL
-#define PORT_PGCR	0xA405010CUL
-#define PORT_PHCR	0xA405010EUL
-#define PORT_PJCR	0xA4050110UL
-#define PORT_PKCR	0xA4050112UL
-#define PORT_PLCR	0xA4050114UL
-#define PORT_SCPCR	0xA4050116UL
-#define PORT_PMCR	0xA4050118UL
-#define PORT_PNCR	0xA405011AUL
-#define PORT_PQCR	0xA405011CUL
-#define PORT_PRCR	0xA405011EUL
-#define PORT_PTCR	0xA405014CUL
-#define PORT_PUCR	0xA405014EUL
-#define PORT_PVCR	0xA4050150UL
-
-#define PORT_PSELA	0xA4050140UL
-#define PORT_PSELB	0xA4050142UL
-#define PORT_PSELC	0xA4050144UL
-#define PORT_PSELE	0xA4050158UL
-
-#define PORT_HIZCRA	0xA4050146UL
-#define PORT_HIZCRB	0xA4050148UL
-#define PORT_DRVCR	0xA405014AUL
-
-#define PORT_PADR  	0xA4050120UL
-#define PORT_PBDR  	0xA4050122UL
-#define PORT_PCDR  	0xA4050124UL
-#define PORT_PDDR  	0xA4050126UL
-#define PORT_PEDR  	0xA4050128UL
-#define PORT_PFDR  	0xA405012AUL
-#define PORT_PGDR  	0xA405012CUL
-#define PORT_PHDR  	0xA405012EUL
-#define PORT_PJDR  	0xA4050130UL
-#define PORT_PKDR  	0xA4050132UL
-#define PORT_PLDR  	0xA4050134UL
-#define PORT_SCPDR  	0xA4050136UL
-#define PORT_PMDR  	0xA4050138UL
-#define PORT_PNDR  	0xA405013AUL
-#define PORT_PQDR  	0xA405013CUL
-#define PORT_PRDR  	0xA405013EUL
-#define PORT_PTDR  	0xA405016CUL
-#define PORT_PUDR  	0xA405016EUL
-#define PORT_PVDR  	0xA4050170UL
-
-#define IRQ0_IRQ	32
-#define IRQ1_IRQ	33
-#define IRQ2_IRQ	34
-#define IRQ3_IRQ	35
-#define IRQ4_IRQ	36
-#define IRQ5_IRQ	37
-#define IRQ6_IRQ	38
-#define IRQ7_IRQ	39
-
-#define INTPRI00	0xA4140010UL
-
-#define IRQ0_IPR_ADDR	INTPRI00
-#define IRQ1_IPR_ADDR	INTPRI00
-#define IRQ2_IPR_ADDR	INTPRI00
-#define IRQ3_IPR_ADDR	INTPRI00
-#define IRQ4_IPR_ADDR	INTPRI00
-#define IRQ5_IPR_ADDR	INTPRI00
-#define IRQ6_IPR_ADDR	INTPRI00
-#define IRQ7_IPR_ADDR	INTPRI00
-
-#define IRQ0_IPR_POS	7
-#define IRQ1_IPR_POS	6
-#define IRQ2_IPR_POS	5
-#define IRQ3_IPR_POS	4
-#define IRQ4_IPR_POS	3
-#define IRQ5_IPR_POS	2
-#define IRQ6_IPR_POS	1
-#define IRQ7_IPR_POS	0
-
-#define IRQ0_PRIORITY	1
-#define IRQ1_PRIORITY	1
-#define IRQ2_PRIORITY	1
-#define IRQ3_PRIORITY	1
-#define IRQ4_PRIORITY	1
-#define IRQ5_PRIORITY	1
-#define IRQ6_PRIORITY	1
-#define IRQ7_PRIORITY	1
-
-#endif /* __ASM_SH_IRQ_SH73180_H */
diff --git a/include/asm-sh/irq-sh7343.h b/include/asm-sh/irq-sh7343.h
deleted file mode 100644
index 5d15419..0000000
--- a/include/asm-sh/irq-sh7343.h
+++ /dev/null
@@ -1,317 +0,0 @@
-#ifndef __ASM_SH_IRQ_SH7343_H
-#define __ASM_SH_IRQ_SH7343_H
-
-/*
- * linux/include/asm-sh/irq-sh7343.h
- *
- * Copyright (C) 2006 Kenati Technologies Inc.
- * Andre Mccurdy <andre@kenati.com>
- * Ranjit Deshpande <ranjit@kenati.com>
- */
-
-#undef INTC_IPRA
-#undef INTC_IPRB
-#undef INTC_IPRC
-#undef INTC_IPRD
-
-#undef DMTE0_IRQ
-#undef DMTE1_IRQ
-#undef DMTE2_IRQ
-#undef DMTE3_IRQ
-#undef DMTE4_IRQ
-#undef DMTE5_IRQ
-#undef DMTE6_IRQ
-#undef DMTE7_IRQ
-#undef DMAE_IRQ
-#undef DMA_IPR_ADDR
-#undef DMA_IPR_POS
-#undef DMA_PRIORITY
-
-#undef INTC_IMCR0
-#undef INTC_IMCR1
-#undef INTC_IMCR2
-#undef INTC_IMCR3
-#undef INTC_IMCR4
-#undef INTC_IMCR5
-#undef INTC_IMCR6
-#undef INTC_IMCR7
-#undef INTC_IMCR8
-#undef INTC_IMCR9
-#undef INTC_IMCR10
-
-
-#define INTC_IPRA  	0xA4080000UL
-#define INTC_IPRB  	0xA4080004UL
-#define INTC_IPRC  	0xA4080008UL
-#define INTC_IPRD  	0xA408000CUL
-#define INTC_IPRE  	0xA4080010UL
-#define INTC_IPRF  	0xA4080014UL
-#define INTC_IPRG  	0xA4080018UL
-#define INTC_IPRH  	0xA408001CUL
-#define INTC_IPRI  	0xA4080020UL
-#define INTC_IPRJ  	0xA4080024UL
-#define INTC_IPRK  	0xA4080028UL
-#define INTC_IPRL  	0xA408002CUL
-
-#define INTC_IMR0	0xA4080080UL
-#define INTC_IMR1	0xA4080084UL
-#define INTC_IMR2	0xA4080088UL
-#define INTC_IMR3	0xA408008CUL
-#define INTC_IMR4	0xA4080090UL
-#define INTC_IMR5	0xA4080094UL
-#define INTC_IMR6	0xA4080098UL
-#define INTC_IMR7	0xA408009CUL
-#define INTC_IMR8	0xA40800A0UL
-#define INTC_IMR9	0xA40800A4UL
-#define INTC_IMR10	0xA40800A8UL
-#define INTC_IMR11	0xA40800ACUL
-
-#define INTC_IMCR0	0xA40800C0UL
-#define INTC_IMCR1	0xA40800C4UL
-#define INTC_IMCR2	0xA40800C8UL
-#define INTC_IMCR3	0xA40800CCUL
-#define INTC_IMCR4	0xA40800D0UL
-#define INTC_IMCR5	0xA40800D4UL
-#define INTC_IMCR6	0xA40800D8UL
-#define INTC_IMCR7	0xA40800DCUL
-#define INTC_IMCR8	0xA40800E0UL
-#define INTC_IMCR9	0xA40800E4UL
-#define INTC_IMCR10	0xA40800E8UL
-#define INTC_IMCR11	0xA40800ECUL
-
-#define INTC_ICR0	0xA4140000UL
-#define INTC_ICR1	0xA414001CUL
-
-#define INTMSK0		0xa4140044
-#define INTMSKCLR0	0xa4140064
-#define INTC_INTPRI0	0xa4140010
-
-/*
-  NOTE:
-
-  *_IRQ = (INTEVT2 - 0x200)/0x20
-*/
-
-/* TMU0 */
-#define TMU0_IRQ	16
-#define TMU0_IPR_ADDR	INTC_IPRA
-#define TMU0_IPR_POS	 3
-#define TMU0_PRIORITY	 2
-
-#define TIMER_IRQ       16
-#define TIMER_IPR_ADDR  INTC_IPRA
-#define TIMER_IPR_POS    3
-#define TIMER_PRIORITY   2
-
-/* TMU1 */
-#define TMU1_IRQ	17
-#define TMU1_IPR_ADDR	INTC_IPRA
-#define TMU1_IPR_POS	 2
-#define TMU1_PRIORITY	 2
-
-/* TMU2 */
-#define TMU2_IRQ	18
-#define TMU2_IPR_ADDR	INTC_IPRA
-#define TMU2_IPR_POS	 1
-#define TMU2_PRIORITY	 2
-
-/* LCDC */
-#define LCDC_IRQ	28
-#define LCDC_IPR_ADDR	INTC_IPRB
-#define LCDC_IPR_POS	 2
-#define LCDC_PRIORITY	 2
-
-/* VIO (Video I/O) */
-#define CEU_IRQ		52
-#define BEU_IRQ		53
-#define VEU_IRQ		54
-#define VOU_IRQ		55
-#define VIO_IPR_ADDR	INTC_IPRE
-#define VIO_IPR_POS	 2
-#define VIO_PRIORITY	 2
-
-/* MFI (Multi Functional Interface) */
-#define MFI_IRQ		56
-#define MFI_IPR_ADDR	INTC_IPRE
-#define MFI_IPR_POS	 1
-#define MFI_PRIORITY	 2
-
-/* VPU (Video Processing Unit) */
-#define VPU_IRQ		60
-#define VPU_IPR_ADDR	INTC_IPRE
-#define VPU_IPR_POS	 0
-#define VPU_PRIORITY	 2
-
-/* 3DG */
-#define TDG_IRQ		63
-#define TDG_IPR_ADDR	INTC_IPRJ
-#define TDG_IPR_POS	 2
-#define TDG_PRIORITY	 2
-
-/* DMAC(1) */
-#define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
-#define DMA1_IPR_ADDR	INTC_IPRE
-#define DMA1_IPR_POS	3
-#define DMA1_PRIORITY	7
-
-/* DMAC(2) */
-#define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#define DMA2_IPR_ADDR	INTC_IPRF
-#define DMA2_IPR_POS	2
-#define DMA2_PRIORITY	7
-
-/* SCIF0 */
-#define SCIF_ERI_IRQ	80
-#define SCIF_RXI_IRQ	81
-#define SCIF_BRI_IRQ	82
-#define SCIF_TXI_IRQ	83
-#define SCIF_IPR_ADDR	INTC_IPRG
-#define SCIF_IPR_POS	3
-#define SCIF_PRIORITY	3
-
-/* SIOF0 */
-#define SIOF0_IRQ	84
-#define SIOF0_IPR_ADDR	INTC_IPRH
-#define SIOF0_IPR_POS	3
-#define SIOF0_PRIORITY	3
-
-/* FLCTL (Flash Memory Controller) */
-#define FLSTE_IRQ	92
-#define FLTEND_IRQ	93
-#define FLTRQ0_IRQ	94
-#define FLTRQ1_IRQ	95
-#define FLCTL_IPR_ADDR	INTC_IPRH
-#define FLCTL_IPR_POS	1
-#define FLCTL_PRIORITY	3
-
-/* IIC(0) (IIC Bus Interface) */
-#define IIC0_ALI_IRQ	96
-#define IIC0_TACKI_IRQ	97
-#define IIC0_WAITI_IRQ	98
-#define IIC0_DTEI_IRQ	99
-#define IIC0_IPR_ADDR	INTC_IPRH
-#define IIC0_IPR_POS	0
-#define IIC0_PRIORITY	3
-
-/* IIC(1) (IIC Bus Interface) */
-#define IIC1_ALI_IRQ	44
-#define IIC1_TACKI_IRQ	45
-#define IIC1_WAITI_IRQ	46
-#define IIC1_DTEI_IRQ	47
-#define IIC1_IPR_ADDR	INTC_IPRI
-#define IIC1_IPR_POS	0
-#define IIC1_PRIORITY	3
-
-/* SIO0 */
-#define SIO0_IRQ	88
-#define SIO0_IPR_ADDR	INTC_IPRI
-#define SIO0_IPR_POS	3
-#define SIO0_PRIORITY	3
-
-/* SDHI */
-#define SDHI_SDHII0_IRQ	100
-#define SDHI_SDHII1_IRQ	101
-#define SDHI_SDHII2_IRQ	102
-#define SDHI_SDHII3_IRQ	103
-#define SDHI_IPR_ADDR	INTC_IPRK
-#define SDHI_IPR_POS	0
-#define SDHI_PRIORITY	3
-
-/* SIU (Sound Interface Unit) */
-#define SIU_IRQ		108
-#define SIU_IPR_ADDR	INTC_IPRJ
-#define SIU_IPR_POS	1
-#define SIU_PRIORITY	3
-
-#define PORT_PACR	0xA4050100UL
-#define PORT_PBCR	0xA4050102UL
-#define PORT_PCCR	0xA4050104UL
-#define PORT_PDCR	0xA4050106UL
-#define PORT_PECR	0xA4050108UL
-#define PORT_PFCR	0xA405010AUL
-#define PORT_PGCR	0xA405010CUL
-#define PORT_PHCR	0xA405010EUL
-#define PORT_PJCR	0xA4050110UL
-#define PORT_PKCR	0xA4050112UL
-#define PORT_PLCR	0xA4050114UL
-#define PORT_SCPCR	0xA4050116UL
-#define PORT_PMCR	0xA4050118UL
-#define PORT_PNCR	0xA405011AUL
-#define PORT_PQCR	0xA405011CUL
-#define PORT_PRCR	0xA405011EUL
-#define PORT_PTCR	0xA405014CUL
-#define PORT_PUCR	0xA405014EUL
-#define PORT_PVCR	0xA4050150UL
-
-#define PORT_PSELA	0xA4050140UL
-#define PORT_PSELB	0xA4050142UL
-#define PORT_PSELC	0xA4050144UL
-#define PORT_PSELE	0xA4050158UL
-
-#define PORT_HIZCRA	0xA4050146UL
-#define PORT_HIZCRB	0xA4050148UL
-#define PORT_DRVCR	0xA405014AUL
-
-#define PORT_PADR  	0xA4050120UL
-#define PORT_PBDR  	0xA4050122UL
-#define PORT_PCDR  	0xA4050124UL
-#define PORT_PDDR  	0xA4050126UL
-#define PORT_PEDR  	0xA4050128UL
-#define PORT_PFDR  	0xA405012AUL
-#define PORT_PGDR  	0xA405012CUL
-#define PORT_PHDR  	0xA405012EUL
-#define PORT_PJDR  	0xA4050130UL
-#define PORT_PKDR  	0xA4050132UL
-#define PORT_PLDR  	0xA4050134UL
-#define PORT_SCPDR  	0xA4050136UL
-#define PORT_PMDR  	0xA4050138UL
-#define PORT_PNDR  	0xA405013AUL
-#define PORT_PQDR  	0xA405013CUL
-#define PORT_PRDR  	0xA405013EUL
-#define PORT_PTDR  	0xA405016CUL
-#define PORT_PUDR  	0xA405016EUL
-#define PORT_PVDR  	0xA4050170UL
-
-#define IRQ0_IRQ	32
-#define IRQ1_IRQ	33
-#define IRQ2_IRQ	34
-#define IRQ3_IRQ	35
-#define IRQ4_IRQ	36
-#define IRQ5_IRQ	37
-#define IRQ6_IRQ	38
-#define IRQ7_IRQ	39
-
-#define INTPRI00	0xA4140010UL
-
-#define IRQ0_IPR_ADDR	INTPRI00
-#define IRQ1_IPR_ADDR	INTPRI00
-#define IRQ2_IPR_ADDR	INTPRI00
-#define IRQ3_IPR_ADDR	INTPRI00
-#define IRQ4_IPR_ADDR	INTPRI00
-#define IRQ5_IPR_ADDR	INTPRI00
-#define IRQ6_IPR_ADDR	INTPRI00
-#define IRQ7_IPR_ADDR	INTPRI00
-
-#define IRQ0_IPR_POS	7
-#define IRQ1_IPR_POS	6
-#define IRQ2_IPR_POS	5
-#define IRQ3_IPR_POS	4
-#define IRQ4_IPR_POS	3
-#define IRQ5_IPR_POS	2
-#define IRQ6_IPR_POS	1
-#define IRQ7_IPR_POS	0
-
-#define IRQ0_PRIORITY	1
-#define IRQ1_PRIORITY	1
-#define IRQ2_PRIORITY	1
-#define IRQ3_PRIORITY	1
-#define IRQ4_PRIORITY	1
-#define IRQ5_PRIORITY	1
-#define IRQ6_PRIORITY	1
-#define IRQ7_PRIORITY	1
-
-#endif /* __ASM_SH_IRQ_SH7343_H */
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
deleted file mode 100644
index 19912ae..0000000
--- a/include/asm-sh/irq-sh7780.h
+++ /dev/null
@@ -1,311 +0,0 @@
-#ifndef __ASM_SH_IRQ_SH7780_H
-#define __ASM_SH_IRQ_SH7780_H
-
-/*
- * linux/include/asm-sh/irq-sh7780.h
- *
- * Copyright (C) 2004 Takashi SHUDO <shudo@hitachi-ul.co.jp>
- */
-#define INTC_BASE	0xffd00000
-#define INTC_ICR0	(INTC_BASE+0x0)
-#define INTC_ICR1	(INTC_BASE+0x1c)
-#define INTC_INTPRI	(INTC_BASE+0x10)
-#define INTC_INTREQ	(INTC_BASE+0x24)
-#define INTC_INTMSK0	(INTC_BASE+0x44)
-#define INTC_INTMSK1	(INTC_BASE+0x48)
-#define INTC_INTMSK2	(INTC_BASE+0x40080)
-#define INTC_INTMSKCLR0	(INTC_BASE+0x64)
-#define INTC_INTMSKCLR1	(INTC_BASE+0x68)
-#define INTC_INTMSKCLR2	(INTC_BASE+0x40084)
-#define INTC_NMIFCR	(INTC_BASE+0xc0)
-#define INTC_USERIMASK	(INTC_BASE+0x30000)
-
-#define	INTC_INT2PRI0	(INTC_BASE+0x40000)
-#define	INTC_INT2PRI1	(INTC_BASE+0x40004)
-#define	INTC_INT2PRI2	(INTC_BASE+0x40008)
-#define	INTC_INT2PRI3	(INTC_BASE+0x4000c)
-#define	INTC_INT2PRI4	(INTC_BASE+0x40010)
-#define	INTC_INT2PRI5	(INTC_BASE+0x40014)
-#define	INTC_INT2PRI6	(INTC_BASE+0x40018)
-#define	INTC_INT2PRI7	(INTC_BASE+0x4001c)
-#define	INTC_INT2A0	(INTC_BASE+0x40030)
-#define	INTC_INT2A1	(INTC_BASE+0x40034)
-#define	INTC_INT2MSKR	(INTC_BASE+0x40038)
-#define	INTC_INT2MSKCR	(INTC_BASE+0x4003c)
-#define	INTC_INT2B0	(INTC_BASE+0x40040)
-#define	INTC_INT2B1	(INTC_BASE+0x40044)
-#define	INTC_INT2B2	(INTC_BASE+0x40048)
-#define	INTC_INT2B3	(INTC_BASE+0x4004c)
-#define	INTC_INT2B4	(INTC_BASE+0x40050)
-#define	INTC_INT2B5	(INTC_BASE+0x40054)
-#define	INTC_INT2B6	(INTC_BASE+0x40058)
-#define	INTC_INT2B7	(INTC_BASE+0x4005c)
-#define	INTC_INT2GPIC	(INTC_BASE+0x40090)
-/*
-  NOTE:
-  *_IRQ = (INTEVT2 - 0x200)/0x20
-*/
-/* IRQ 0-7 line external int*/
-#define IRQ0_IRQ	2
-#define IRQ0_IPR_ADDR	INTC_INTPRI
-#define IRQ0_IPR_POS	7
-#define IRQ0_PRIORITY	2
-
-#define IRQ1_IRQ	4
-#define IRQ1_IPR_ADDR	INTC_INTPRI
-#define IRQ1_IPR_POS	6
-#define IRQ1_PRIORITY	2
-
-#define IRQ2_IRQ	6
-#define IRQ2_IPR_ADDR	INTC_INTPRI
-#define IRQ2_IPR_POS	5
-#define IRQ2_PRIORITY	2
-
-#define IRQ3_IRQ	8
-#define IRQ3_IPR_ADDR	INTC_INTPRI
-#define IRQ3_IPR_POS	4
-#define IRQ3_PRIORITY	2
-
-#define IRQ4_IRQ	10
-#define IRQ4_IPR_ADDR	INTC_INTPRI
-#define IRQ4_IPR_POS	3
-#define IRQ4_PRIORITY	2
-
-#define IRQ5_IRQ	12
-#define IRQ5_IPR_ADDR	INTC_INTPRI
-#define IRQ5_IPR_POS	2
-#define IRQ5_PRIORITY	2
-
-#define IRQ6_IRQ	14
-#define IRQ6_IPR_ADDR	INTC_INTPRI
-#define IRQ6_IPR_POS	1
-#define IRQ6_PRIORITY	2
-
-#define IRQ7_IRQ	0
-#define IRQ7_IPR_ADDR	INTC_INTPRI
-#define IRQ7_IPR_POS	0
-#define IRQ7_PRIORITY	2
-
-/* TMU */
-/* ch0 */
-#define TMU_IRQ		28
-#define	TMU_IPR_ADDR	INTC_INT2PRI0
-#define	TMU_IPR_POS	3
-#define TMU_PRIORITY	2
-
-#define TIMER_IRQ	28
-#define	TIMER_IPR_ADDR	INTC_INT2PRI0
-#define	TIMER_IPR_POS	3
-#define TIMER_PRIORITY	2
-
-/* ch 1*/
-#define TMU_CH1_IRQ		29
-#define	TMU_CH1_IPR_ADDR	INTC_INT2PRI0
-#define	TMU_CH1_IPR_POS		2
-#define TMU_CH1_PRIORITY	2
-
-#define TIMER1_IRQ	29
-#define	TIMER1_IPR_ADDR	INTC_INT2PRI0
-#define	TIMER1_IPR_POS	2
-#define TIMER1_PRIORITY	2
-
-/* ch 2*/
-#define TMU_CH2_IRQ		30
-#define	TMU_CH2_IPR_ADDR	INTC_INT2PRI0
-#define	TMU_CH2_IPR_POS		1
-#define TMU_CH2_PRIORITY	2
-/* ch 2 Input capture */
-#define TMU_CH2IC_IRQ		31
-#define	TMU_CH2IC_IPR_ADDR	INTC_INT2PRI0
-#define	TMU_CH2IC_IPR_POS	0
-#define TMU_CH2IC_PRIORITY	2
-/* ch 3 */
-#define TMU_CH3_IRQ		96
-#define	TMU_CH3_IPR_ADDR	INTC_INT2PRI1
-#define	TMU_CH3_IPR_POS		3
-#define TMU_CH3_PRIORITY	2
-/* ch 4 */
-#define TMU_CH4_IRQ		97
-#define	TMU_CH4_IPR_ADDR	INTC_INT2PRI1
-#define	TMU_CH4_IPR_POS		2
-#define TMU_CH4_PRIORITY	2
-/* ch 5*/
-#define TMU_CH5_IRQ		98
-#define	TMU_CH5_IPR_ADDR	INTC_INT2PRI1
-#define	TMU_CH5_IPR_POS		1
-#define TMU_CH5_PRIORITY	2
-
-/* SCIF0 */
-#define SCIF0_ERI_IRQ	40
-#define SCIF0_RXI_IRQ	41
-#define SCIF0_BRI_IRQ	42
-#define SCIF0_TXI_IRQ	43
-#define	SCIF0_IPR_ADDR	INTC_INT2PRI2
-#define	SCIF0_IPR_POS	3
-#define SCIF0_PRIORITY	3
-
-/* SCIF1 */
-#define SCIF1_ERI_IRQ	76
-#define SCIF1_RXI_IRQ	77
-#define SCIF1_BRI_IRQ	78
-#define SCIF1_TXI_IRQ	79
-#define	SCIF1_IPR_ADDR	INTC_INT2PRI2
-#define	SCIF1_IPR_POS	2
-#define SCIF1_PRIORITY	3
-
-#define	WDT_IRQ		27
-#define	WDT_IPR_ADDR	INTC_INT2PRI2
-#define	WDT_IPR_POS	1
-#define	WDT_PRIORITY	2
-
-/* DMAC(0) */
-#define	DMINT0_IRQ	34
-#define	DMINT1_IRQ	35
-#define	DMINT2_IRQ	36
-#define	DMINT3_IRQ	37
-#define	DMINT4_IRQ	44
-#define	DMINT5_IRQ	45
-#define	DMINT6_IRQ	46
-#define	DMINT7_IRQ	47
-#define	DMAE_IRQ	38
-#define	DMA0_IPR_ADDR	INTC_INT2PRI3
-#define	DMA0_IPR_POS	2
-#define	DMA0_PRIORITY	7
-
-/* DMAC(1) */
-#define	DMINT8_IRQ	92
-#define	DMINT9_IRQ	93
-#define	DMINT10_IRQ	94
-#define	DMINT11_IRQ	95
-#define	DMA1_IPR_ADDR	INTC_INT2PRI3
-#define	DMA1_IPR_POS	1
-#define	DMA1_PRIORITY	7
-
-#define	DMTE0_IRQ	DMINT0_IRQ
-#define	DMTE4_IRQ	DMINT4_IRQ
-#define	DMA_IPR_ADDR	DMA0_IPR_ADDR
-#define	DMA_IPR_POS	DMA0_IPR_POS
-#define	DMA_PRIORITY	DMA0_PRIORITY
-
-/* CMT */
-#define	CMT_IRQ		56
-#define	CMT_IPR_ADDR	INTC_INT2PRI4
-#define	CMT_IPR_POS	3
-#define	CMT_PRIORITY	0
-
-/* HAC */
-#define	HAC_IRQ		60
-#define	HAC_IPR_ADDR	INTC_INT2PRI4
-#define	HAC_IPR_POS	2
-#define	CMT_PRIORITY	0
-
-/* PCIC(0) */
-#define	PCIC0_IRQ	64
-#define	PCIC0_IPR_ADDR	INTC_INT2PRI4
-#define	PCIC0_IPR_POS	1
-#define	PCIC0_PRIORITY	2
-
-/* PCIC(1) */
-#define	PCIC1_IRQ	65
-#define	PCIC1_IPR_ADDR	INTC_INT2PRI4
-#define	PCIC1_IPR_POS	0
-#define	PCIC1_PRIORITY	2
-
-/* PCIC(2) */
-#define	PCIC2_IRQ	66
-#define	PCIC2_IPR_ADDR	INTC_INT2PRI5
-#define	PCIC2_IPR_POS	3
-#define	PCIC2_PRIORITY	2
-
-/* PCIC(3) */
-#define	PCIC3_IRQ	67
-#define	PCIC3_IPR_ADDR	INTC_INT2PRI5
-#define	PCIC3_IPR_POS	2
-#define	PCIC3_PRIORITY	2
-
-/* PCIC(4) */
-#define	PCIC4_IRQ	68
-#define	PCIC4_IPR_ADDR	INTC_INT2PRI5
-#define	PCIC4_IPR_POS	1
-#define	PCIC4_PRIORITY	2
-
-/* PCIC(5) */
-#define	PCICERR_IRQ	69
-#define	PCICPWD3_IRQ	70
-#define	PCICPWD2_IRQ	71
-#define	PCICPWD1_IRQ	72
-#define	PCICPWD0_IRQ	73
-#define	PCIC5_IPR_ADDR	INTC_INT2PRI5
-#define	PCIC5_IPR_POS	0
-#define	PCIC5_PRIORITY	2
-
-/* SIOF */
-#define	SIOF_IRQ	80
-#define	SIOF_IPR_ADDR	INTC_INT2PRI6
-#define	SIOF_IPR_POS	3
-#define	SIOF_PRIORITY	3
-
-/* HSPI */
-#define	HSPI_IRQ	84
-#define	HSPI_IPR_ADDR	INTC_INT2PRI6
-#define	HSPI_IPR_POS	2
-#define	HSPI_PRIORITY	3
-
-/* MMCIF */
-#define	MMCIF_FSTAT_IRQ	88
-#define	MMCIF_TRAN_IRQ	89
-#define	MMCIF_ERR_IRQ	90
-#define	MMCIF_FRDY_IRQ	91
-#define	MMCIF_IPR_ADDR	INTC_INT2PRI6
-#define	MMCIF_IPR_POS	1
-#define	HSPI_PRIORITY	3
-
-/* SSI */
-#define	SSI_IRQ		100
-#define	SSI_IPR_ADDR	INTC_INT2PRI6
-#define	SSI_IPR_POS	0
-#define	SSI_PRIORITY	3
-
-/* FLCTL */
-#define	FLCTL_FLSTE_IRQ		104
-#define	FLCTL_FLTEND_IRQ	105
-#define	FLCTL_FLTRQ0_IRQ	106
-#define	FLCTL_FLTRQ1_IRQ	107
-#define	FLCTL_IPR_ADDR		INTC_INT2PRI7
-#define	FLCTL_IPR_POS		3
-#define	FLCTL_PRIORITY		3
-
-/* GPIO */
-#define	GPIO0_IRQ	108
-#define	GPIO1_IRQ	109
-#define	GPIO2_IRQ	110
-#define	GPIO3_IRQ	111
-#define	GPIO_IPR_ADDR	INTC_INT2PRI7
-#define	GPIO_IPR_POS	2
-#define	GPIO_PRIORITY	3
-
-#define	INTC_TMU0_MSK	0
-#define	INTC_TMU3_MSK	1
-#define	INTC_RTC_MSK	2
-#define	INTC_SCIF0_MSK	3
-#define	INTC_SCIF1_MSK	4
-#define	INTC_WDT_MSK	5
-#define	INTC_HUID_MSK	7
-#define	INTC_DMAC0_MSK	8
-#define	INTC_DMAC1_MSK	9
-#define	INTC_CMT_MSK	12
-#define	INTC_HAC_MSK	13
-#define	INTC_PCIC0_MSK	14
-#define	INTC_PCIC1_MSK	15
-#define	INTC_PCIC2_MSK	16
-#define	INTC_PCIC3_MSK	17
-#define	INTC_PCIC4_MSK	18
-#define	INTC_PCIC5_MSK	19
-#define	INTC_SIOF_MSK	20
-#define	INTC_HSPI_MSK	21
-#define	INTC_MMCIF_MSK	22
-#define	INTC_SSI_MSK	23
-#define	INTC_FLCTL_MSK	24
-#define	INTC_GPIO_MSK	25
-
-#endif /* __ASM_SH_IRQ_SH7780_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 6cd3e9e..fd57608 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -1,233 +1,9 @@
 #ifndef __ASM_SH_IRQ_H
 #define __ASM_SH_IRQ_H
 
-/*
- *
- * linux/include/asm-sh/irq.h
- *
- * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2003  Paul Mundt
- *
- */
-
 #include <asm/machvec.h>
 #include <asm/ptrace.h>		/* for pt_regs */
 
-#ifndef CONFIG_CPU_SUBTYPE_SH7780
-
-#define INTC_DMAC0_MSK	0
-
-#if defined(CONFIG_CPU_SH3)
-#define INTC_IPRA	0xfffffee2UL
-#define INTC_IPRB	0xfffffee4UL
-#elif defined(CONFIG_CPU_SH4)
-#define INTC_IPRA	0xffd00004UL
-#define INTC_IPRB	0xffd00008UL
-#define INTC_IPRC	0xffd0000cUL
-#define INTC_IPRD	0xffd00010UL
-#endif
-
-#define TIMER_IRQ	16
-#define TIMER_IPR_ADDR	INTC_IPRA
-#define TIMER_IPR_POS	 3
-#define TIMER_PRIORITY	 2
-
-#define TIMER1_IRQ	17
-#define TIMER1_IPR_ADDR	INTC_IPRA
-#define TIMER1_IPR_POS	 2
-#define TIMER1_PRIORITY	 4
-
-#define RTC_IRQ		22
-#define RTC_IPR_ADDR	INTC_IPRA
-#define RTC_IPR_POS	 0
-#define RTC_PRIORITY	TIMER_PRIORITY
-
-#if defined(CONFIG_CPU_SH3)
-#define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
-#define DMA_IPR_ADDR	INTC_IPRE
-#define DMA_IPR_POS	3
-#define DMA_PRIORITY	7
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-/* TMU2 */
-#define TIMER2_IRQ      18
-#define TIMER2_IPR_ADDR INTC_IPRA
-#define TIMER2_IPR_POS   1
-#define TIMER2_PRIORITY  2
-
-/* WDT */
-#define WDT_IRQ		27
-#define WDT_IPR_ADDR	INTC_IPRB
-#define WDT_IPR_POS	 3
-#define WDT_PRIORITY	 2
-
-/* SIM (SIM Card Module) */
-#define SIM_ERI_IRQ	23
-#define SIM_RXI_IRQ	24
-#define SIM_TXI_IRQ	25
-#define SIM_TEND_IRQ	26
-#define SIM_IPR_ADDR	INTC_IPRB
-#define SIM_IPR_POS	 1
-#define SIM_PRIORITY	 2
-
-/* VIO (Video I/O) */
-#define VIO_IRQ		52
-#define VIO_IPR_ADDR	INTC_IPRE
-#define VIO_IPR_POS	 2
-#define VIO_PRIORITY	 2
-
-/* MFI (Multi Functional Interface) */
-#define MFI_IRQ		56
-#define MFI_IPR_ADDR	INTC_IPRE
-#define MFI_IPR_POS	 1
-#define MFI_PRIORITY	 2
-
-/* VPU (Video Processing Unit) */
-#define VPU_IRQ		60
-#define VPU_IPR_ADDR	INTC_IPRE
-#define VPU_IPR_POS	 0
-#define VPU_PRIORITY	 2
-
-/* KEY (Key Scan Interface) */
-#define KEY_IRQ		79
-#define KEY_IPR_ADDR	INTC_IPRF
-#define KEY_IPR_POS	 3
-#define KEY_PRIORITY	 2
-
-/* CMT (Compare Match Timer) */
-#define CMT_IRQ		104
-#define CMT_IPR_ADDR	INTC_IPRF
-#define CMT_IPR_POS	 0
-#define CMT_PRIORITY	 2
-
-/* DMAC(1) */
-#define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
-#define DMA1_IPR_ADDR	INTC_IPRE
-#define DMA1_IPR_POS	3
-#define DMA1_PRIORITY	7
-
-/* DMAC(2) */
-#define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#define DMA2_IPR_ADDR	INTC_IPRF
-#define DMA2_IPR_POS	2
-#define DMA2_PRIORITY	7
-
-/* SIOF0 */
-#define SIOF0_IRQ	84
-#define SIOF0_IPR_ADDR	INTC_IPRH
-#define SIOF0_IPR_POS	3
-#define SIOF0_PRIORITY	3
-
-/* FLCTL (Flash Memory Controller) */
-#define FLSTE_IRQ	92
-#define FLTEND_IRQ	93
-#define FLTRQ0_IRQ	94
-#define FLTRQ1_IRQ	95
-#define FLCTL_IPR_ADDR	INTC_IPRH
-#define FLCTL_IPR_POS	1
-#define FLCTL_PRIORITY	3
-
-/* IIC (IIC Bus Interface) */
-#define IIC_ALI_IRQ	96
-#define IIC_TACKI_IRQ	97
-#define IIC_WAITI_IRQ	98
-#define IIC_DTEI_IRQ	99
-#define IIC_IPR_ADDR	INTC_IPRH
-#define IIC_IPR_POS	0
-#define IIC_PRIORITY	3
-
-/* SIO0 */
-#define SIO0_IRQ	88
-#define SIO0_IPR_ADDR	INTC_IPRI
-#define SIO0_IPR_POS	3
-#define SIO0_PRIORITY	3
-
-/* SIU (Sound Interface Unit) */
-#define SIU_IRQ		108
-#define SIU_IPR_ADDR	INTC_IPRJ
-#define SIU_IPR_POS	1
-#define SIU_PRIORITY	3
-
-#endif
-#elif defined(CONFIG_CPU_SH4)
-#define DMTE0_IRQ	34
-#define DMTE1_IRQ	35
-#define DMTE2_IRQ	36
-#define DMTE3_IRQ	37
-#define DMTE4_IRQ	44	/* 7751R only */
-#define DMTE5_IRQ	45	/* 7751R only */
-#define DMTE6_IRQ	46	/* 7751R only */
-#define DMTE7_IRQ	47	/* 7751R only */
-#define DMAE_IRQ	38
-#define DMA_IPR_ADDR	INTC_IPRC
-#define DMA_IPR_POS	2
-#define DMA_PRIORITY	7
-#endif
-
-#if defined (CONFIG_CPU_SUBTYPE_SH7707) || defined (CONFIG_CPU_SUBTYPE_SH7708) || \
-    defined (CONFIG_CPU_SUBTYPE_SH7709) || defined (CONFIG_CPU_SUBTYPE_SH7750) || \
-    defined (CONFIG_CPU_SUBTYPE_SH7751) || defined (CONFIG_CPU_SUBTYPE_SH7706)
-#define SCI_ERI_IRQ	23
-#define SCI_RXI_IRQ	24
-#define SCI_TXI_IRQ	25
-#define SCI_IPR_ADDR	INTC_IPRB
-#define SCI_IPR_POS	1
-#define SCI_PRIORITY	3
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define SCIF0_IRQ	80
-#define SCIF0_IPR_ADDR	INTC_IPRG
-#define SCIF0_IPR_POS	3
-#define SCIF0_PRIORITY	3
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7707) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define SCIF_ERI_IRQ	56
-#define SCIF_RXI_IRQ	57
-#define SCIF_BRI_IRQ	58
-#define SCIF_TXI_IRQ	59
-#define SCIF_IPR_ADDR	INTC_IPRE
-#define SCIF_IPR_POS	1
-#define SCIF_PRIORITY	3
-
-#define IRDA_ERI_IRQ	52
-#define IRDA_RXI_IRQ	53
-#define IRDA_BRI_IRQ	54
-#define IRDA_TXI_IRQ	55
-#define IRDA_IPR_ADDR	INTC_IPRE
-#define IRDA_IPR_POS	2
-#define IRDA_PRIORITY	3
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
-      defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202)
-#define SCIF_ERI_IRQ	40
-#define SCIF_RXI_IRQ	41
-#define SCIF_BRI_IRQ	42
-#define SCIF_TXI_IRQ	43
-#define SCIF_IPR_ADDR	INTC_IPRC
-#define SCIF_IPR_POS	1
-#define SCIF_PRIORITY	3
-#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-#define SCIF1_ERI_IRQ	23
-#define SCIF1_RXI_IRQ	24
-#define SCIF1_BRI_IRQ	25
-#define SCIF1_TXI_IRQ	26
-#define SCIF1_IPR_ADDR	INTC_IPRB
-#define SCIF1_IPR_POS	1
-#define SCIF1_PRIORITY	3
-#endif /* ST40STB1 */
-
-#endif /* 775x / SH4-202 / ST40STB1 */
-#endif /* 7780 */
-
 /* NR_IRQS is made from three components:
  *   1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
  *   2. PINT_NR_IRQS   - number of PINT interrupts
@@ -265,6 +41,10 @@
 # define ONCHIP_NR_IRQS 109
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define ONCHIP_NR_IRQS 111
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+# define ONCHIP_NR_IRQS 256
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+# define ONCHIP_NR_IRQS 128
 #elif defined(CONFIG_SH_UNKNOWN)	/* Most be last */
 # define ONCHIP_NR_IRQS 144
 #endif
@@ -312,9 +92,11 @@
 /* NR_IRQS. 1+2+3 */
 #define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)
 
-extern void disable_irq(unsigned int);
-extern void disable_irq_nosync(unsigned int);
-extern void enable_irq(unsigned int);
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
 
 /*
  * Simple Mask Register Support
@@ -327,362 +109,36 @@ extern unsigned short *irq_mask_register;
  */
 void init_IRQ_pint(void);
 
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address, addr, will be set from ipr_idx via the
+ * map_ipridx_to_addr function.
+ */
 struct ipr_data {
 	unsigned int irq;
-	unsigned int addr;	/* Address of Interrupt Priority Register */
-	int shift;		/* Shifts of the 16-bit data */
+	int ipr_idx;		/* Index for the IPR registered */
+	int shift;		/* Number of bits to shift the data */
 	int priority;		/* The priority */
+	unsigned int addr;	/* Address of Interrupt Priority Register */
 };
 
 /*
- * Function for "on chip support modules".
+ * Given an IPR IDX, map the value to an IPR register address.
  */
-extern void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
-extern void make_imask_irq(unsigned int irq);
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#undef INTC_IPRA
-#undef INTC_IPRB
-#define INTC_IPRA  	0xA414FEE2UL
-#define INTC_IPRB  	0xA414FEE4UL
-#define INTC_IPRC  	0xA4140016UL
-#define INTC_IPRD  	0xA4140018UL
-#define INTC_IPRE  	0xA414001AUL
-#define INTC_IPRF  	0xA4080000UL
-#define INTC_IPRG  	0xA4080002UL
-#define INTC_IPRH  	0xA4080004UL
-#define INTC_IPRI  	0xA4080006UL
-#define INTC_IPRJ  	0xA4080008UL
-
-#define INTC_IMR0	0xA4080040UL
-#define INTC_IMR1	0xA4080042UL
-#define INTC_IMR2	0xA4080044UL
-#define INTC_IMR3	0xA4080046UL
-#define INTC_IMR4	0xA4080048UL
-#define INTC_IMR5	0xA408004AUL
-#define INTC_IMR6	0xA408004CUL
-#define INTC_IMR7	0xA408004EUL
-#define INTC_IMR8	0xA4080050UL
-#define INTC_IMR9	0xA4080052UL
-#define INTC_IMR10	0xA4080054UL
-
-#define INTC_IMCR0	0xA4080060UL
-#define INTC_IMCR1	0xA4080062UL
-#define INTC_IMCR2	0xA4080064UL
-#define INTC_IMCR3	0xA4080066UL
-#define INTC_IMCR4	0xA4080068UL
-#define INTC_IMCR5	0xA408006AUL
-#define INTC_IMCR6	0xA408006CUL
-#define INTC_IMCR7	0xA408006EUL
-#define INTC_IMCR8	0xA4080070UL
-#define INTC_IMCR9	0xA4080072UL
-#define INTC_IMCR10	0xA4080074UL
-
-#define INTC_ICR0	0xA414FEE0UL
-#define INTC_ICR1	0xA4140010UL
-
-#define INTC_IRR0	0xA4140004UL
-
-#define PORT_PACR	0xA4050100UL
-#define PORT_PBCR	0xA4050102UL
-#define PORT_PCCR	0xA4050104UL
-#define PORT_PDCR	0xA4050106UL
-#define PORT_PECR	0xA4050108UL
-#define PORT_PFCR	0xA405010AUL
-#define PORT_PGCR	0xA405010CUL
-#define PORT_PHCR	0xA405010EUL
-#define PORT_PJCR	0xA4050110UL
-#define PORT_PKCR	0xA4050112UL
-#define PORT_PLCR	0xA4050114UL
-#define PORT_SCPCR	0xA4050116UL
-#define PORT_PMCR	0xA4050118UL
-#define PORT_PNCR	0xA405011AUL
-#define PORT_PQCR	0xA405011CUL
-
-#define PORT_PSELA	0xA4050140UL
-#define PORT_PSELB	0xA4050142UL
-#define PORT_PSELC	0xA4050144UL
-
-#define PORT_HIZCRA	0xA4050146UL
-#define PORT_HIZCRB	0xA4050148UL
-#define PORT_DRVCR	0xA4050150UL
-
-#define PORT_PADR  	0xA4050120UL
-#define PORT_PBDR  	0xA4050122UL
-#define PORT_PCDR  	0xA4050124UL
-#define PORT_PDDR  	0xA4050126UL
-#define PORT_PEDR  	0xA4050128UL
-#define PORT_PFDR  	0xA405012AUL
-#define PORT_PGDR  	0xA405012CUL
-#define PORT_PHDR  	0xA405012EUL
-#define PORT_PJDR  	0xA4050130UL
-#define PORT_PKDR  	0xA4050132UL
-#define PORT_PLDR  	0xA4050134UL
-#define PORT_SCPDR  	0xA4050136UL
-#define PORT_PMDR  	0xA4050138UL
-#define PORT_PNDR  	0xA405013AUL
-#define PORT_PQDR  	0xA405013CUL
-
-#define IRQ0_IRQ	32
-#define IRQ1_IRQ	33
-#define IRQ2_IRQ	34
-#define IRQ3_IRQ	35
-#define IRQ4_IRQ	36
-#define IRQ5_IRQ	37
-
-#define IRQ0_IPR_ADDR	INTC_IPRC
-#define IRQ1_IPR_ADDR	INTC_IPRC
-#define IRQ2_IPR_ADDR	INTC_IPRC
-#define IRQ3_IPR_ADDR	INTC_IPRC
-#define IRQ4_IPR_ADDR	INTC_IPRD
-#define IRQ5_IPR_ADDR	INTC_IPRD
-
-#define IRQ0_IPR_POS	0
-#define IRQ1_IPR_POS	1
-#define IRQ2_IPR_POS	2
-#define IRQ3_IPR_POS	3
-#define IRQ4_IPR_POS	0
-#define IRQ5_IPR_POS	1
+unsigned int map_ipridx_to_addr(int idx);
 
-#define IRQ0_PRIORITY	1
-#define IRQ1_PRIORITY	1
-#define IRQ2_PRIORITY	1
-#define IRQ3_PRIORITY	1
-#define IRQ4_PRIORITY	1
-#define IRQ5_PRIORITY	1
-
-extern int ipr_irq_demux(int irq);
-#define __irq_demux(irq) ipr_irq_demux(irq)
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7604)
-#define INTC_IPRA	0xfffffee2UL
-#define INTC_IPRB	0xfffffe60UL
-
-#define INTC_VCRA	0xfffffe62UL
-#define INTC_VCRB	0xfffffe64UL
-#define INTC_VCRC	0xfffffe66UL
-#define INTC_VCRD	0xfffffe68UL
-
-#define INTC_VCRWDT	0xfffffee4UL
-#define INTC_VCRDIV	0xffffff0cUL
-#define INTC_VCRDMA0	0xffffffa0UL
-#define INTC_VCRDMA1	0xffffffa8UL
-
-#define INTC_ICR	0xfffffee0UL
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7707) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7710)
-#define INTC_IRR0	0xa4000004UL
-#define INTC_IRR1	0xa4000006UL
-#define INTC_IRR2	0xa4000008UL
-
-#define INTC_ICR0	0xfffffee0UL
-#define INTC_ICR1	0xa4000010UL
-#define INTC_ICR2	0xa4000012UL
-#define INTC_INTER	0xa4000014UL
-
-#define INTC_IPRC	0xa4000016UL
-#define INTC_IPRD	0xa4000018UL
-#define INTC_IPRE	0xa400001aUL
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
-#define INTC_IPRF	0xa400001cUL
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define INTC_IPRF	0xa4080000UL
-#define INTC_IPRG	0xa4080002UL
-#define INTC_IPRH	0xa4080004UL
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
-/* Interrupt Controller Registers */
-#undef INTC_IPRA
-#undef INTC_IPRB
-#define INTC_IPRA  	0xA414FEE2UL
-#define INTC_IPRB  	0xA414FEE4UL
-#define INTC_IPRF  	0xA4080000UL
-#define INTC_IPRG  	0xA4080002UL
-#define INTC_IPRH  	0xA4080004UL
-#define INTC_IPRI  	0xA4080006UL
-
-#undef INTC_ICR0
-#undef INTC_ICR1
-#define INTC_ICR0	0xA414FEE0UL
-#define INTC_ICR1	0xA4140010UL
-
-#define INTC_IRR0	0xa4000004UL
-#define INTC_IRR1	0xa4000006UL
-#define INTC_IRR2	0xa4000008UL
-#define INTC_IRR3	0xa400000AUL
-#define INTC_IRR4	0xa400000CUL
-#define INTC_IRR5	0xa4080020UL
-#define INTC_IRR7	0xa4080024UL
-#define INTC_IRR8	0xa4080026UL
-
-/* Interrupt numbers */
-#define TIMER2_IRQ      18
-#define TIMER2_IPR_ADDR INTC_IPRA
-#define TIMER2_IPR_POS   1
-#define TIMER2_PRIORITY  2
-
-/* WDT */
-#define WDT_IRQ		27
-#define WDT_IPR_ADDR	INTC_IPRB
-#define WDT_IPR_POS	 3
-#define WDT_PRIORITY	 2
-
-#define SCIF0_ERI_IRQ	52
-#define SCIF0_RXI_IRQ	53
-#define SCIF0_BRI_IRQ	54
-#define SCIF0_TXI_IRQ	55
-#define SCIF0_IPR_ADDR	INTC_IPRE
-#define SCIF0_IPR_POS	2
-#define SCIF0_PRIORITY	3
-
-#define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#define DMA2_IPR_ADDR	INTC_IPRF
-#define DMA2_IPR_POS	2
-#define DMA2_PRIORITY	7
-
-#define IPSEC_IRQ	79
-#define IPSEC_IPR_ADDR	INTC_IPRF
-#define IPSEC_IPR_POS	3
-#define IPSEC_PRIORITY	3
-
-/* EDMAC */
-#define EDMAC0_IRQ	80
-#define EDMAC0_IPR_ADDR	INTC_IPRG
-#define EDMAC0_IPR_POS	3
-#define EDMAC0_PRIORITY	3
-
-#define EDMAC1_IRQ	81
-#define EDMAC1_IPR_ADDR	INTC_IPRG
-#define EDMAC1_IPR_POS	2
-#define EDMAC1_PRIORITY	3
-
-#define EDMAC2_IRQ	82
-#define EDMAC2_IPR_ADDR	INTC_IPRG
-#define EDMAC2_IPR_POS	1
-#define EDMAC2_PRIORITY	3
-
-/* SIOF */
-#define SIOF0_ERI_IRQ	96
-#define SIOF0_TXI_IRQ	97
-#define SIOF0_RXI_IRQ	98
-#define SIOF0_CCI_IRQ	99
-#define SIOF0_IPR_ADDR	INTC_IPRH
-#define SIOF0_IPR_POS	0
-#define SIOF0_PRIORITY	7
-
-#define SIOF1_ERI_IRQ	100
-#define SIOF1_TXI_IRQ	101
-#define SIOF1_RXI_IRQ	102
-#define SIOF1_CCI_IRQ	103
-#define SIOF1_IPR_ADDR	INTC_IPRI
-#define SIOF1_IPR_POS	1
-#define SIOF1_PRIORITY	7
-#endif /* CONFIG_CPU_SUBTYPE_SH7710 */
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-#define PORT_PACR	0xa4050100UL
-#define PORT_PBCR	0xa4050102UL
-#define PORT_PCCR	0xa4050104UL
-#define PORT_PETCR	0xa4050106UL
-#define PORT_PADR  	0xa4050120UL
-#define PORT_PBDR  	0xa4050122UL
-#define PORT_PCDR  	0xa4050124UL
-#else
-#define PORT_PACR	0xa4000100UL
-#define PORT_PBCR	0xa4000102UL
-#define PORT_PCCR	0xa4000104UL
-#define PORT_PFCR	0xa400010aUL
-#define PORT_PADR  	0xa4000120UL
-#define PORT_PBDR  	0xa4000122UL
-#define PORT_PCDR  	0xa4000124UL
-#define PORT_PFDR  	0xa400012aUL
-#endif
-
-#define IRQ0_IRQ	32
-#define IRQ1_IRQ	33
-#define IRQ2_IRQ	34
-#define IRQ3_IRQ	35
-#define IRQ4_IRQ	36
-#define IRQ5_IRQ	37
-
-#define IRQ0_IPR_ADDR	INTC_IPRC
-#define IRQ1_IPR_ADDR	INTC_IPRC
-#define IRQ2_IPR_ADDR	INTC_IPRC
-#define IRQ3_IPR_ADDR	INTC_IPRC
-#define IRQ4_IPR_ADDR	INTC_IPRD
-#define IRQ5_IPR_ADDR	INTC_IPRD
-
-#define IRQ0_IPR_POS	0
-#define IRQ1_IPR_POS	1
-#define IRQ2_IPR_POS	2
-#define IRQ3_IPR_POS	3
-#define IRQ4_IPR_POS	0
-#define IRQ5_IPR_POS	1
-
-#define IRQ0_PRIORITY	1
-#define IRQ1_PRIORITY	1
-#define IRQ2_PRIORITY	1
-#define IRQ3_PRIORITY	1
-#define IRQ4_PRIORITY	1
-#define IRQ5_PRIORITY	1
-
-#define PINT0_IRQ	40
-#define PINT8_IRQ	41
-
-#define PINT0_IPR_ADDR	INTC_IPRD
-#define PINT8_IPR_ADDR	INTC_IPRD
-
-#define PINT0_IPR_POS	3
-#define PINT8_IPR_POS	2
-#define PINT0_PRIORITY	2
-#define PINT8_PRIORITY	2
-
-extern int ipr_irq_demux(int irq);
-#define __irq_demux(irq) ipr_irq_demux(irq)
-#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
-    defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202)
-#define INTC_ICR        0xffd00000
-#define INTC_ICR_NMIL	(1<<15)
-#define INTC_ICR_MAI	(1<<14)
-#define INTC_ICR_NMIB	(1<<9)
-#define INTC_ICR_NMIE	(1<<8)
-#define INTC_ICR_IRLM	(1<<7)
-#endif
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
-#include <asm/irq-sh7780.h>
-#endif
-
-/* SH with INTC2-style interrupts */
-#ifdef CONFIG_CPU_HAS_INTC2_IRQ
-#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-#define INTC2_BASE	0xfe080000
-#define INTC2_FIRST_IRQ 64
-#define INTC2_INTREQ_OFFSET	0x20
-#define INTC2_INTMSK_OFFSET	0x40
-#define INTC2_INTMSKCLR_OFFSET	0x60
-#define NR_INTC2_IRQS	25
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE	0xfe080000
-#define INTC2_FIRST_IRQ 48	/* INTEVT 0x800 */
-#define INTC2_INTREQ_OFFSET	0x20
-#define INTC2_INTMSK_OFFSET	0x40
-#define INTC2_INTMSKCLR_OFFSET	0x60
-#define NR_INTC2_IRQS	64
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define INTC2_BASE	0xffd40000
-#define INTC2_FIRST_IRQ	21
-#define INTC2_INTMSK_OFFSET	(0x38)
-#define INTC2_INTMSKCLR_OFFSET	(0x3c)
-#define NR_INTC2_IRQS	60
-#endif
+/*
+ * Enable individual interrupt mode for external IPR IRQs.
+ */
+void ipr_irq_enable_irlm(void);
 
-#define INTC2_INTPRI_OFFSET	0x00
+/*
+ * Function for "on chip support modules".
+ */
+void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
+void make_imask_irq(unsigned int irq);
+void init_IRQ_ipr(void);
 
 struct intc2_data {
 	unsigned short irq;
@@ -693,20 +149,14 @@ struct intc2_data {
 
 void make_intc2_irq(struct intc2_data *, unsigned int nr_irqs);
 void init_IRQ_intc2(void);
-#endif
-
-extern int shmse_irq_demux(int irq);
 
 static inline int generic_irq_demux(int irq)
 {
 	return irq;
 }
 
-#ifndef __irq_demux
-#define __irq_demux(irq)	(irq)
-#endif
 #define irq_canonicalize(irq)	(irq)
-#define irq_demux(irq)		__irq_demux(sh_mv.mv_irq_demux(irq))
+#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
 
 #ifdef CONFIG_4KSTACKS
 extern void irq_ctx_init(int cpu);
@@ -717,12 +167,4 @@ extern void irq_ctx_exit(int cpu);
 # define irq_ctx_exit(cpu) do { } while (0)
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
-#include <asm/irq-sh73180.h>
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343)
-#include <asm/irq-sh7343.h>
-#endif
-
 #endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h
new file mode 100644
index 0000000..9dedc1b
--- /dev/null
+++ b/include/asm-sh/irqflags.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+		"stc	r6_bank, %1\n\t"
+		"or	%1, %0\n\t"
+#endif
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x000000f0)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags != 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags, __dummy;
+
+	__asm__ __volatile__ (
+		"stc	sr, %1\n\t"
+		"mov	%1, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		"mov	%1, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags), "=&r" (__dummy)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if ((flags & 0xf0) != 0xf0)
+		raw_local_irq_enable();
+}
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
index c7088ef..46f04e2 100644
--- a/include/asm-sh/mmu_context.h
+++ b/include/asm-sh/mmu_context.h
@@ -10,7 +10,6 @@
 
 #include <asm/cpu/mmu_context.h>
 #include <asm/tlbflush.h>
-#include <asm/pgalloc.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
@@ -42,10 +41,8 @@ extern unsigned long mmu_context_cache;
 /*
  * Get MMU context if needed.
  */
-static __inline__ void
-get_mmu_context(struct mm_struct *mm)
+static inline void get_mmu_context(struct mm_struct *mm)
 {
-	extern void flush_tlb_all(void);
 	unsigned long mc = mmu_context_cache;
 
 	/* Check if we have old version of context. */
@@ -61,6 +58,7 @@ get_mmu_context(struct mm_struct *mm)
 		 * Flush all TLB and start new cycle.
 		 */
 		flush_tlb_all();
+
 		/*
 		 * Fix version; Note that we avoid version #0
 		 * to distingush NO_CONTEXT.
@@ -75,11 +73,10 @@ get_mmu_context(struct mm_struct *mm)
  * Initialize the context related info for a new mm_struct
  * instance.
  */
-static __inline__ int init_new_context(struct task_struct *tsk,
+static inline int init_new_context(struct task_struct *tsk,
 				       struct mm_struct *mm)
 {
 	mm->context.id = NO_CONTEXT;
-
 	return 0;
 }
 
@@ -87,12 +84,12 @@ static __inline__ int init_new_context(struct task_struct *tsk,
  * Destroy context related info for an mm_struct that is about
  * to be put to rest.
  */
-static __inline__ void destroy_context(struct mm_struct *mm)
+static inline void destroy_context(struct mm_struct *mm)
 {
 	/* Do nothing */
 }
 
-static __inline__ void set_asid(unsigned long asid)
+static inline void set_asid(unsigned long asid)
 {
 	unsigned long __dummy;
 
@@ -105,7 +102,7 @@ static __inline__ void set_asid(unsigned long asid)
 			        "r" (0xffffff00));
 }
 
-static __inline__ unsigned long get_asid(void)
+static inline unsigned long get_asid(void)
 {
 	unsigned long asid;
 
@@ -120,24 +117,29 @@ static __inline__ unsigned long get_asid(void)
  * After we have set current->mm to a new value, this activates
  * the context for the new mm so we see the new mappings.
  */
-static __inline__ void activate_context(struct mm_struct *mm)
+static inline void activate_context(struct mm_struct *mm)
 {
 	get_mmu_context(mm);
 	set_asid(mm->context.id & MMU_CONTEXT_ASID_MASK);
 }
 
-/* MMU_TTB can be used for optimizing the fault handling.
-   (Currently not used) */
-static __inline__ void switch_mm(struct mm_struct *prev,
-				 struct mm_struct *next,
-				 struct task_struct *tsk)
+/* MMU_TTB is used for optimizing the fault handling. */
+static inline void set_TTB(pgd_t *pgd)
 {
-	if (likely(prev != next)) {
-		unsigned long __pgdir = (unsigned long)next->pgd;
+	ctrl_outl((unsigned long)pgd, MMU_TTB);
+}
 
-		__asm__ __volatile__("mov.l	%0, %1"
-				     : /* no output */
-				     : "r" (__pgdir), "m" (__m(MMU_TTB)));
+static inline pgd_t *get_TTB(void)
+{
+	return (pgd_t *)ctrl_inl(MMU_TTB);
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (likely(prev != next)) {
+		set_TTB(next->pgd);
 		activate_context(next);
 	}
 }
@@ -147,7 +149,7 @@ static __inline__ void switch_mm(struct mm_struct *prev,
 #define activate_mm(prev, next) \
 	switch_mm((prev),(next),NULL)
 
-static __inline__ void
+static inline void
 enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
 }
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index ca8b26d..380fd62 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -13,9 +13,16 @@
    [ P4 control   ]		0xE0000000
  */
 
-
 /* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "Bogus kernel page size?"
+#endif
 
 #ifdef __ASSEMBLY__
 #define PAGE_SIZE	(1 << PAGE_SHIFT)
@@ -28,8 +35,14 @@
 
 #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
 #define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT	18
 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
 #define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT	22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT	26
 #endif
 
 #ifdef CONFIG_HUGETLB_PAGE
@@ -69,15 +82,25 @@ extern void __copy_user_page(void *to, void *from, void *orig_to);
 /*
  * These are used to make use of C type-checking..
  */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+#define pte_val(x) \
+	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#else
+typedef struct { unsigned long pte_low; } pte_t;
 typedef struct { unsigned long pgprot; } pgprot_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x) ((pte_t) { (x) } )
+#endif
+
+typedef struct { unsigned long pgd; } pgd_t;
 
-#define pte_val(x)	((x).pte)
 #define pgd_val(x)	((x).pgd)
 #define pgprot_val(x)	((x).pgprot)
 
-#define __pte(x) ((pte_t) { (x) } )
 #define __pgd(x) ((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h
index e841465..888e452 100644
--- a/include/asm-sh/pgalloc.h
+++ b/include/asm-sh/pgalloc.h
@@ -1,13 +1,16 @@
 #ifndef __ASM_SH_PGALLOC_H
 #define __ASM_SH_PGALLOC_H
 
-#define pmd_populate_kernel(mm, pmd, pte) \
-		set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
 
 static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
 				struct page *pte)
 {
-	set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
 }
 
 /*
@@ -15,7 +18,16 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
  */
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT);
+
+	if (pgd) {
+		memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+		memcpy(pgd + USER_PTRS_PER_PGD,
+		       swapper_pg_dir + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return pgd;
 }
 
 static inline void pgd_free(pgd_t *pgd)
diff --git a/include/asm-sh/pgtable-2level.h b/include/asm-sh/pgtable-2level.h
deleted file mode 100644
index b525db6..0000000
--- a/include/asm-sh/pgtable-2level.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_PGTABLE_2LEVEL_H
-#define __ASM_SH_PGTABLE_2LEVEL_H
-
-/*
- * traditional two-level paging structure:
- */
-
-#define PGDIR_SHIFT	22
-#define PTRS_PER_PGD	1024
-
-/*
- * this is two-level, so we don't really have any
- * PMD directory physically.
- */
-#define PMD_SHIFT	22
-#define PTRS_PER_PMD	1
-
-#define PTRS_PER_PTE	1024
-
-#ifndef __ASSEMBLY__
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd)		{ return 0; }
-static inline int pgd_bad(pgd_t pgd)		{ return 0; }
-static inline int pgd_present(pgd_t pgd)	{ return 1; }
-static inline void pgd_clear (pgd_t * pgdp) 	{ }
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
-
-#define pgd_page_vaddr(pgd) \
-((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
-
-#define pgd_page(pgd) \
-	(phys_to_page(pgd_val(pgd)))
-
-static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
-{
-	return (pmd_t *) dir;
-}
-
-#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index 2c8682a..c84901d 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -15,15 +15,10 @@
 #include <asm-generic/pgtable-nopmd.h>
 #include <asm/page.h>
 
-#define PTRS_PER_PGD		1024
-
 #ifndef __ASSEMBLY__
 #include <asm/addrspace.h>
 #include <asm/fixmap.h>
 
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -33,15 +28,28 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
 #endif /* !__ASSEMBLY__ */
 
-/* traditional two-level paging structure */
-#define PGDIR_SHIFT	22
-#define PTRS_PER_PMD	1
-#define PTRS_PER_PTE	1024
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+/*
+ * traditional two-level paging structure
+ */
+/* PTE bits */
+#ifdef CONFIG_X2TLB
+# define PTE_MAGNITUDE	3	/* 64-bit PTEs on extended mode SH-X2 TLB */
+#else
+# define PTE_MAGNITUDE	2	/* 32-bit PTEs */
+#endif
+#define PTE_SHIFT	PAGE_SHIFT
+#define PTE_BITS	(PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
+#define PGDIR_BITS	(32 - PGDIR_SHIFT)
+#define PGDIR_SIZE	(1 << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
+/* Entries per level */
+#define PTRS_PER_PTE	(PAGE_SIZE / 4)
+#define PTRS_PER_PGD	(PAGE_SIZE / 4)
+
 #define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
 #define FIRST_USER_ADDRESS	0
 
@@ -49,7 +57,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
 /*
  * First 1MB map is used by fixed purpose.
- * Currently only 4-enty (16kB) is used (see arch/sh/mm/cache.c)
+ * Currently only 4-entry (16kB) is used (see arch/sh/mm/cache.c)
  */
 #define VMALLOC_START	(P3SEG+0x00100000)
 #define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
@@ -57,7 +65,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 /*
  * Linux PTEL encoding.
  *
- * Hardware and software bit definitions for the PTEL value:
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
  *
  * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
  *
@@ -76,20 +85,57 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  *
  * - Bits 31, 30, and 29 remain unused by everyone and can be used for future
  *   software flags, although care must be taken to update _PAGE_CLEAR_FLAGS.
+ *
+ * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
  */
+/* Legacy and compat mode bits */
 #define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
 #define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
 #define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
 #define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
-#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
-#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
-#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed */
-#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#ifndef CONFIG_X2TLB
+# define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
+# define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
+# define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
+# define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#endif
 #define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
 #define _PAGE_PROTNONE	0x200		/* software: if not present  */
 #define _PAGE_ACCESSED	0x400		/* software: page referenced */
 #define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
 
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
+
+/* Wrapper for extended mode pgprot twiddling */
+#ifdef CONFIG_X2TLB
+# define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+#else
+# define _PAGE_EXT(x)		(0)
+#endif
+
 /* software: moves to PTEA.TC (Timing Control) */
 #define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
 #define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
@@ -114,37 +160,160 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
 #define _PAGE_FLAGS_HARDWARE_MASK	(0x1fffffff & ~(_PAGE_CLEAR_FLAGS))
 
-/* Hardware flags: SZ0=1 (4k-byte) */
-#define _PAGE_FLAGS_HARD	_PAGE_SZ0
+/* Hardware flags, page size encoding */
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
+# endif
+#endif
 
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define _PAGE_SZHUGE	(_PAGE_SZ1)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
 #endif
 
-#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK \
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_MMU
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_USER_READ | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_USER_EXEC | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_USER_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
 #define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC) \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD	PAGE_READONLY
+#define PAGE_RWX	PAGE_SHARED
+#define PAGE_WRITEONLY	PAGE_SHARED
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
 #define PAGE_KERNEL_PCC(slot, type) \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_FLAGS_HARD | (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | (type))
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
 #else /* no mmu */
 #define PAGE_NONE		__pgprot(0)
 #define PAGE_SHARED		__pgprot(0)
 #define PAGE_COPY		__pgprot(0)
+#define PAGE_EXECREAD		__pgprot(0)
+#define PAGE_RWX		__pgprot(0)
 #define PAGE_READONLY		__pgprot(0)
+#define PAGE_WRITEONLY		__pgprot(0)
 #define PAGE_KERNEL		__pgprot(0)
 #define PAGE_KERNEL_NOCACHE	__pgprot(0)
 #define PAGE_KERNEL_RO		__pgprot(0)
@@ -154,27 +323,32 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #endif /* __ASSEMBLY__ */
 
 /*
- * As i386 and MIPS, SuperH can't do page protection for execute, and
- * considers that the same as a read.  Also, write permissions imply
- * read permissions. This is the closest we can get..
+ * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
+ * protection for execute, and considers it the same as a read. Also, write
+ * permission implies read permission. This is the closest we can get..
+ *
+ * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
+ * not only supporting separate execute, read, and write bits, but having
+ * completely separate permission bits for user and kernel space.
  */
+	 /*xwr*/
 #define __P000	PAGE_NONE
 #define __P001	PAGE_READONLY
 #define __P010	PAGE_COPY
 #define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY
-#define __P101	PAGE_READONLY
+#define __P100	PAGE_EXECREAD
+#define __P101	PAGE_EXECREAD
 #define __P110	PAGE_COPY
 #define __P111	PAGE_COPY
 
 #define __S000	PAGE_NONE
 #define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
+#define __S010	PAGE_WRITEONLY
 #define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY
-#define __S101	PAGE_READONLY
-#define __S110	PAGE_SHARED
-#define __S111	PAGE_SHARED
+#define __S100	PAGE_EXECREAD
+#define __S101	PAGE_EXECREAD
+#define __S110	PAGE_RWX
+#define __S111	PAGE_RWX
 
 #ifndef __ASSEMBLY__
 
@@ -183,7 +357,17 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  * within a page table are directly modified.  Thus, the following
  * hook is made available.
  */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#else
 #define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
 #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 /*
@@ -192,18 +376,18 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  */
 #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
 
-#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 #define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
 #define pte_none(x)	(!pte_val(x))
 #define pte_present(x)	(pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
 
 #define pmd_none(x)	(!pmd_val(x))
-#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_present(x)	(pmd_val(x))
 #define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
-#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
 
 #define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
 #define pte_page(x)	phys_to_page(pte_val(x)&PTE_PHYS_MASK)
@@ -212,28 +396,52 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
-static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
-static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_RW; }
-static inline int pte_not_present(pte_t pte){ return !(pte_val(pte) & _PAGE_PRESENT); }
-
-static inline pte_t pte_rdprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
-static inline pte_t pte_exprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
-static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); return pte; }
-static inline pte_t pte_mkread(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
-static inline pte_t pte_mkexec(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
-static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; }
-#ifdef CONFIG_HUGETLB_PAGE
-static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
+#define pte_not_present(pte)	(!(pte_val(pte) & _PAGE_PRESENT))
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_file(pte)		(pte_val(pte) & _PAGE_FILE)
+
+#ifdef CONFIG_X2TLB
+#define pte_read(pte)		((pte).pte_high & _PAGE_EXT_USER_READ)
+#define pte_exec(pte)		((pte).pte_high & _PAGE_EXT_USER_EXEC)
+#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
+#else
+#define pte_read(pte)		(pte_val(pte) & _PAGE_USER)
+#define pte_exec(pte)		(pte_val(pte) & _PAGE_USER)
+#define pte_write(pte)		(pte_val(pte) & _PAGE_RW)
 #endif
 
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, rdprotect, &= ~_PAGE_EXT_USER_READ);
+PTE_BIT_FUNC(high, mkread, |= _PAGE_EXT_USER_READ | _PAGE_EXT_KERN_READ);
+PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, exprotect, &= ~_PAGE_EXT_USER_EXEC);
+PTE_BIT_FUNC(high, mkexec, |= _PAGE_EXT_USER_EXEC | _PAGE_EXT_KERN_EXEC);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, rdprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(low, mkread, |= _PAGE_USER);
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, exprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(low, mkexec, |= _PAGE_USER);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+
 /*
  * Macro and implementation to make a page protection as uncachable.
  */
@@ -258,13 +466,14 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot)
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-
-#define pmd_page_vaddr(pmd) \
-((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+{
+	set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) |
+			    pgprot_val(newprot)));
+	return pte;
+}
 
-#define pmd_page(pmd) \
-	(phys_to_page(pmd_val(pmd)))
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
 
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
@@ -283,8 +492,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define pte_unmap(pte)		do { } while (0)
 #define pte_unmap_nested(pte)	do { } while (0)
 
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+	       &(e), (e).pte_high, (e).pte_low)
+#else
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#endif
+
 #define pgd_ERROR(e) \
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
@@ -337,6 +553,9 @@ extern unsigned int kobjsize(const void *objp);
 extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 #endif
 
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+
 #include <asm-generic/pgtable.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 45bb74e..6f1dd7c 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -36,7 +36,10 @@
  */
 enum cpu_type {
 	/* SH-2 types */
-	CPU_SH7604,
+	CPU_SH7604, CPU_SH7619,
+
+	/* SH-2A types */
+	CPU_SH7206,
 
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,
@@ -47,7 +50,10 @@ enum cpu_type {
 	/* SH-4 types */
 	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
 	CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
+
+	/* SH-4A types */
 	CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781,
+	CPU_SH7785,
 
 	/* Unknown subtype */
 	CPU_SH_NONE
@@ -130,12 +136,11 @@ union sh_fpu_union {
 };
 
 struct thread_struct {
+	/* Saved registers when thread is descheduled */
 	unsigned long sp;
 	unsigned long pc;
 
-	unsigned long trap_no, error_code;
-	unsigned long address;
-	/* Hardware debugging registers may come here */
+	/* Hardware debugging registers */
 	unsigned long ubc_pc;
 
 	/* floating point info */
@@ -150,12 +155,7 @@ typedef struct {
 extern int ubc_usercnt;
 
 #define INIT_THREAD  {						\
-	sizeof(init_stack) + (long) &init_stack, /* sp */	\
-	0,					 /* pc */	\
-	0, 0,							\
-	0,							\
-	0,							\
-	{{{0,}},}				/* fpu state */	\
+	.sp = sizeof(init_stack) + (long) &init_stack,		\
 }
 
 /*
@@ -259,8 +259,8 @@ void show_trace(struct task_struct *tsk, unsigned long *sp,
 		struct pt_regs *regs);
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
 
 #define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
 #define cpu_relax()	barrier()
diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h
new file mode 100644
index 0000000..dfc6bad
--- /dev/null
+++ b/include/asm-sh/push-switch.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SH_PUSH_SWITCH_H
+#define __ASM_SH_PUSH_SWITCH_H
+
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+struct push_switch {
+	/* switch state */
+	unsigned int		state:1;
+	/* debounce timer */
+	struct timer_list	debounce;
+	/* workqueue */
+	struct work_struct	work;
+};
+
+struct push_switch_platform_info {
+	/* IRQ handler */
+	irqreturn_t		(*irq_handler)(int irq, void *data);
+	/* Special IRQ flags */
+	unsigned int		irq_flags;
+	/* Bit location of switch */
+	unsigned int		bit;
+	/* Symbolic switch name */
+	const char		*name;
+};
+
+#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h
index 9d2aea5..4931ba8 100644
--- a/include/asm-sh/rwsem.h
+++ b/include/asm-sh/rwsem.h
@@ -25,11 +25,21 @@ struct rw_semaphore {
 #define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
 	spinlock_t		wait_lock;
 	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
 };
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
 #define __RWSEM_INITIALIZER(name) \
 	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
-	  LIST_HEAD_INIT((name).wait_list) }
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEP_MAP_INIT(name) }
 
 #define DECLARE_RWSEM(name)		\
 	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
@@ -39,6 +49,16 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
 extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
 
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)				\
+do {						\
+	static struct lock_class_key __key;	\
+						\
+	__init_rwsem((sem), #sem, &__key);	\
+} while (0)
+
 static inline void init_rwsem(struct rw_semaphore *sem)
 {
 	sem->count = RWSEM_UNLOCKED_VALUE;
@@ -141,6 +161,11 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 		rwsem_downgrade_wake(sem);
 }
 
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
 /*
  * implement exchange and add functionality
  */
diff --git a/include/asm-sh/se7206.h b/include/asm-sh/se7206.h
new file mode 100644
index 0000000..698eb80
--- /dev/null
+++ b/include/asm-sh/se7206.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_SE7206_H
+#define __ASM_SH_SE7206_H
+
+#define PA_SMSC		0x30000000
+#define PA_MRSHPC	0x34000000
+#define PA_LED		0x31400000
+
+void init_se7206_IRQ(void);
+
+#define __IO_PREFIX	se7206
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SE7206_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index 3340126..b1e42e7 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -6,6 +6,7 @@
  * Copyright (C) 2002 Paul Mundt
  */
 
+#include <linux/irqflags.h>
 #include <asm/types.h>
 
 /*
@@ -131,103 +132,6 @@ static inline unsigned long tas(volatile int *m)
 
 #define set_mb(var, value) do { xchg(&var, value); } while (0)
 
-/* Interrupt Control */
-#ifdef CONFIG_CPU_HAS_SR_RB
-static inline void local_irq_enable(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "and	%1, %0\n\t"
-			     "stc	r6_bank, %1\n\t"
-			     "or	%1, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy0), "=r" (__dummy1)
-			     : "1" (~0x000000f0)
-			     : "memory");
-}
-#else
-static inline void local_irq_enable(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	%1, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "1" (~0x000000f0)
-		: "memory");
-}
-#endif
-
-static inline void local_irq_disable(void)
-{
-	unsigned long __dummy;
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "or	#0xf0, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&z" (__dummy)
-			     : /* no inputs */
-			     : "memory");
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ ("stc	sr, %0\n\t"
-			     "or	%2, %0\n\t"
-			     "and	%3, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy0), "=r" (__dummy1)
-			     : "r" (0x10000000), "r" (0xffffff0f)
-			     : "memory");
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ ("stc	sr, %0\n\t"
-			     "and	%2, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy0), "=r" (__dummy1)
-			     : "1" (~0x10000000)
-			     : "memory");
-}
-
-#define local_save_flags(x) \
-	__asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" )
-
-#define irqs_disabled()			\
-({					\
-	unsigned long flags;		\
-	local_save_flags(flags);	\
-	(flags != 0);			\
-})
-
-static inline unsigned long local_irq_save(void)
-{
-	unsigned long flags, __dummy;
-
-	__asm__ __volatile__("stc	sr, %1\n\t"
-			     "mov	%1, %0\n\t"
-			     "or	#0xf0, %0\n\t"
-			     "ldc	%0, sr\n\t"
-			     "mov	%1, %0\n\t"
-			     "and	#0xf0, %0"
-			     : "=&z" (flags), "=&r" (__dummy)
-			     :/**/
-			     : "memory" );
-	return flags;
-}
-
-#define local_irq_restore(x) do {			\
-	if ((x & 0x000000f0) != 0x000000f0)		\
-		local_irq_enable();			\
-} while (0)
-
 /*
  * Jump to P2 area.
  * When handling TLB or caches, we need to do it from P2 area.
@@ -264,9 +168,6 @@ do {							\
 		: "=&r" (__dummy));			\
 } while (0)
 
-/* For spinlocks etc */
-#define local_irq_save(x)	x = local_irq_save()
-
 static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 {
 	unsigned long flags, retval;
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
index 3ebc3f9..0c01dc5 100644
--- a/include/asm-sh/thread_info.h
+++ b/include/asm-sh/thread_info.h
@@ -90,13 +90,7 @@ static inline struct thread_info *current_thread_info(void)
 #endif
 #define free_thread_info(ti)	kfree(ti)
 
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) \
-	stc     r7_bank, reg
-
-#endif
+#endif /* __ASSEMBLY__ */
 
 /*
  * thread information flags
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
index 5df842b..17b5e76 100644
--- a/include/asm-sh/timer.h
+++ b/include/asm-sh/timer.h
@@ -18,11 +18,32 @@ struct sys_timer {
 
 	struct sys_device	dev;
 	struct sys_timer_ops	*ops;
+
+#ifdef CONFIG_NO_IDLE_HZ
+	struct dyn_tick_timer	*dyn_tick;
+#endif
 };
 
+#ifdef CONFIG_NO_IDLE_HZ
+#define DYN_TICK_ENABLED	(1 << 1)
+
+struct dyn_tick_timer {
+	spinlock_t	lock;
+	unsigned int	state;			/* Current state */
+	int		(*enable)(void);	/* Enables dynamic tick */
+	int		(*disable)(void);	/* Disables dynamic tick */
+	void		(*reprogram)(unsigned long); /* Reprograms the timer */
+	int		(*handler)(int, void *);
+};
+
+void timer_dyn_reprogram(void);
+#else
+#define timer_dyn_reprogram()	do { } while (0)
+#endif
+
 #define TICK_SIZE (tick_nsec / 1000)
 
-extern struct sys_timer tmu_timer;
+extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
 extern struct sys_timer *sys_timer;
 
 #ifndef CONFIG_GENERIC_TIME
diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h
index 270a4f4..03f3583 100644
--- a/include/asm-sh/titan.h
+++ b/include/asm-sh/titan.h
@@ -1,9 +1,8 @@
 /*
  * Platform defintions for Titan
  */
-
-#ifndef _ASM_SH_TITAN_TITAN_H
-#define _ASM_SH_TITAN_TITAN_H
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
 
 #define __IO_PREFIX titan
 #include <asm/io_generic.h>
@@ -15,29 +14,4 @@
 #define TITAN_IRQ_MPCIB		11	/* mPCI B */
 #define TITAN_IRQ_USB		11	/* USB */
 
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-#define IRL0_IRQ	0
-#define IRL0_IPR_ADDR	INTC_IPRD
-#define IRL0_IPR_POS	3
-#define IRL0_PRIORITY	8
-
-#define IRL1_IRQ	1
-#define IRL1_IPR_ADDR	INTC_IPRD
-#define IRL1_IPR_POS	2
-#define IRL1_PRIORITY	8
-
-#define IRL2_IRQ	2
-#define IRL2_IPR_ADDR	INTC_IPRD
-#define IRL2_IPR_POS	1
-#define IRL2_PRIORITY	8
-
-#define IRL3_IRQ	3
-#define IRL3_IPR_ADDR	INTC_IPRD
-#define IRL3_IPR_POS	0
-#define IRL3_PRIORITY	8
-
-#endif
+#endif /* __ASM_SH_TITAN_H */
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
index 1c2abde..0cae1d2 100644
--- a/include/asm-sh/unistd.h
+++ b/include/asm-sh/unistd.h
@@ -349,12 +349,30 @@ do { \
 	return (type) (res); \
 } while (0)
 
+#if defined(__sh2__) || defined(__SH2E__) || defined(__SH2A__)
+#define SYSCALL_ARG0	"trapa #0x20"
+#define SYSCALL_ARG1	"trapa #0x21"
+#define SYSCALL_ARG2	"trapa #0x22"
+#define SYSCALL_ARG3	"trapa #0x23"
+#define SYSCALL_ARG4	"trapa #0x24"
+#define SYSCALL_ARG5	"trapa #0x25"
+#define SYSCALL_ARG6	"trapa #0x26"
+#else
+#define SYSCALL_ARG0	"trapa #0x10"
+#define SYSCALL_ARG1	"trapa #0x11"
+#define SYSCALL_ARG2	"trapa #0x12"
+#define SYSCALL_ARG3	"trapa #0x13"
+#define SYSCALL_ARG4	"trapa #0x14"
+#define SYSCALL_ARG5	"trapa #0x15"
+#define SYSCALL_ARG6	"trapa #0x16"
+#endif
+
 /* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
 #define _syscall0(type,name) \
 type name(void) \
 { \
 register long __sc0 __asm__ ("r3") = __NR_##name; \
-__asm__ __volatile__ ("trapa	#0x10" \
+__asm__ __volatile__ (SYSCALL_ARG0 \
 	: "=z" (__sc0) \
 	: "0" (__sc0) \
 	: "memory" ); \
@@ -366,7 +384,7 @@ type name(type1 arg1) \
 { \
 register long __sc0 __asm__ ("r3") = __NR_##name; \
 register long __sc4 __asm__ ("r4") = (long) arg1; \
-__asm__ __volatile__ ("trapa	#0x11" \
+__asm__ __volatile__ (SYSCALL_ARG1 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4) \
 	: "memory"); \
@@ -379,7 +397,7 @@ type name(type1 arg1,type2 arg2) \
 register long __sc0 __asm__ ("r3") = __NR_##name; \
 register long __sc4 __asm__ ("r4") = (long) arg1; \
 register long __sc5 __asm__ ("r5") = (long) arg2; \
-__asm__ __volatile__ ("trapa	#0x12" \
+__asm__ __volatile__ (SYSCALL_ARG2 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4), "r" (__sc5) \
 	: "memory"); \
@@ -393,7 +411,7 @@ register long __sc0 __asm__ ("r3") = __NR_##name; \
 register long __sc4 __asm__ ("r4") = (long) arg1; \
 register long __sc5 __asm__ ("r5") = (long) arg2; \
 register long __sc6 __asm__ ("r6") = (long) arg3; \
-__asm__ __volatile__ ("trapa	#0x13" \
+__asm__ __volatile__ (SYSCALL_ARG3 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6) \
 	: "memory"); \
@@ -408,7 +426,7 @@ register long __sc4 __asm__ ("r4") = (long) arg1; \
 register long __sc5 __asm__ ("r5") = (long) arg2; \
 register long __sc6 __asm__ ("r6") = (long) arg3; \
 register long __sc7 __asm__ ("r7") = (long) arg4; \
-__asm__ __volatile__ ("trapa	#0x14" \
+__asm__ __volatile__ (SYSCALL_ARG4 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6),  \
 	  "r" (__sc7) \
@@ -425,7 +443,7 @@ register long __sc5 __asm__ ("r5") = (long) arg2; \
 register long __sc6 __asm__ ("r6") = (long) arg3; \
 register long __sc7 __asm__ ("r7") = (long) arg4; \
 register long __sc0 __asm__ ("r0") = (long) arg5; \
-__asm__ __volatile__ ("trapa	#0x15" \
+__asm__ __volatile__ (SYSCALL_ARG5 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6), "r" (__sc7),  \
 	  "r" (__sc3) \
@@ -443,7 +461,7 @@ register long __sc6 __asm__ ("r6") = (long) arg3; \
 register long __sc7 __asm__ ("r7") = (long) arg4; \
 register long __sc0 __asm__ ("r0") = (long) arg5; \
 register long __sc1 __asm__ ("r1") = (long) arg6; \
-__asm__ __volatile__ ("trapa	#0x16" \
+__asm__ __volatile__ (SYSCALL_ARG6 \
 	: "=z" (__sc0) \
 	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6), "r" (__sc7),  \
 	  "r" (__sc3), "r" (__sc1) \