diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-17 10:15:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-17 10:15:57 -0700 |
commit | d7d45fedf92b351500af99d03004e59531a3d070 (patch) | |
tree | 3d6a89e8b66770747c9df65186ec345a8babcebe | |
parent | 9134e7d2706a8954f216a9f11ef784e0f9ccd551 (diff) | |
parent | f3261dfb5538e2ff0264fde3050dbd4e922fa296 (diff) | |
download | op-kernel-dev-d7d45fedf92b351500af99d03004e59531a3d070.zip op-kernel-dev-d7d45fedf92b351500af99d03004e59531a3d070.tar.gz |
Merge tag 'char-misc-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char / Misc driver fixes from Greg Kroah-Hartman:
"Here are some small misc and w1 driver fixes for 3.6-rc3. Nothing
major, just some some bugfixes and a new device id for a w1 driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
1-Wire: Add support for the maxim ds1825 temperature sensor
ti-st: Fix check for pdata->chip_awake function pointer
mei: add mei_quirk_probe function
mei: fix device stall after wd is stopped
-rw-r--r-- | Documentation/w1/slaves/w1_therm | 2 | ||||
-rw-r--r-- | drivers/misc/mei/interrupt.c | 2 | ||||
-rw-r--r-- | drivers/misc/mei/main.c | 27 | ||||
-rw-r--r-- | drivers/misc/ti-st/st_ll.c | 2 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_therm.c | 9 | ||||
-rw-r--r-- | drivers/w1/w1_family.h | 1 |
6 files changed, 41 insertions, 2 deletions
diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 0403aaa..874a8ca 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -3,6 +3,7 @@ Kernel driver w1_therm Supported chips: * Maxim ds18*20 based temperature sensors. + * Maxim ds1825 based temperature sensors. Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru> @@ -15,6 +16,7 @@ supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 +W1_THERM_DS1825 0x3B Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index c6ffbbe..d78c05e 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -1253,7 +1253,7 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list, if (dev->wd_timeout) *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); else - *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); + *slots -= mei_data2slots(MEI_WD_PARAMS_SIZE); } } if (dev->stop) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 0923302..7422c76 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -925,6 +925,27 @@ static struct miscdevice mei_misc_device = { }; /** + * mei_quirk_probe - probe for devices that doesn't valid ME interface + * @pdev: PCI device structure + * @ent: entry into pci_device_table + * + * returns true if ME Interface is valid, false otherwise + */ +static bool __devinit mei_quirk_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u32 reg; + if (ent->device == MEI_DEV_ID_PBG_1) { + pci_read_config_dword(pdev, 0x48, ®); + /* make sure that bit 9 is up and bit 10 is down */ + if ((reg & 0x600) == 0x200) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + } + return true; +} +/** * mei_probe - Device Initialization Routine * * @pdev: PCI device structure @@ -939,6 +960,12 @@ static int __devinit mei_probe(struct pci_dev *pdev, int err; mutex_lock(&mei_mutex); + + if (!mei_quirk_probe(pdev, ent)) { + err = -ENODEV; + goto end; + } + if (mei_device) { err = -EEXIST; goto end; diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 1ff460a..93b4d67 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -87,7 +87,7 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) /* communicate to platform about chip wakeup */ kim_data = st_data->kim_data; pdata = kim_data->kim_pdev->dev.platform_data; - if (pdata->chip_asleep) + if (pdata->chip_awake) pdata->chip_awake(NULL); } diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index d90062b..92d08e7 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -91,6 +91,11 @@ static struct w1_family w1_therm_family_DS28EA00 = { .fops = &w1_therm_fops, }; +static struct w1_family w1_therm_family_DS1825 = { + .fid = W1_THERM_DS1825, + .fops = &w1_therm_fops, +}; + struct w1_therm_family_converter { u8 broken; @@ -120,6 +125,10 @@ static struct w1_therm_family_converter w1_therm_families[] = { .f = &w1_therm_family_DS28EA00, .convert = w1_DS18B20_convert_temp }, + { + .f = &w1_therm_family_DS1825, + .convert = w1_DS18B20_convert_temp + } }; static inline int w1_DS18B20_convert_temp(u8 rom[9]) diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index b00ada4..a1f0ce1 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -39,6 +39,7 @@ #define W1_EEPROM_DS2431 0x2D #define W1_FAMILY_DS2760 0x30 #define W1_FAMILY_DS2780 0x32 +#define W1_THERM_DS1825 0x3B #define W1_FAMILY_DS2781 0x3D #define W1_THERM_DS28EA00 0x42 |