diff options
| author | Patrice Chotard <patrice.chotard@st.com> | 2016-08-10 09:39:07 +0200 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2016-08-10 09:23:33 +0100 |
| commit | c4dd1ba355aae2bc3d1213da6c66c53e3c31e028 (patch) | |
| tree | 5d6175b5371a9010f5736c5c5ed84f95548f60cc | |
| parent | 0f4be8cf637ea4637faba8a0e4bf2270287c6ba0 (diff) | |
| download | op-kernel-dev-c4dd1ba355aae2bc3d1213da6c66c53e3c31e028.zip op-kernel-dev-c4dd1ba355aae2bc3d1213da6c66c53e3c31e028.tar.gz | |
mfd: stmpe: Add reset support for all STMPE variant
Reset was only implemented for STMPE1801 variant despite
all variant have a SOFT_RESET bit.
For STMPE2401/2403/801/1601/1801 SOFT_RESET bit is bit 7
of SYS_CTRL register.
For STMPE610/811 (which have the same variant id) SOFT_RESET
bit is bit 1 of SYS_CTRL register.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
| -rw-r--r-- | drivers/mfd/stmpe.c | 23 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.h | 7 |
2 files changed, 20 insertions, 10 deletions
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index c053b2b6..8500525 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -756,13 +756,22 @@ static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks, enable ? mask : 0); } -static int stmpe1801_reset(struct stmpe *stmpe) +static int stmpe_reset(struct stmpe *stmpe) { + u16 id_val = stmpe->variant->id_val; unsigned long timeout; int ret = 0; + u8 reset_bit; + + if (id_val == STMPE811_ID) + /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */ + reset_bit = STMPE811_SYS_CTRL_RESET; + else + /* all other STMPE variant use bit 7 of SYS_CTRL register */ + reset_bit = STMPE_SYS_CTRL_RESET; ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], - STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET); + reset_bit, reset_bit); if (ret < 0) return ret; @@ -771,7 +780,7 @@ static int stmpe1801_reset(struct stmpe *stmpe) ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]); if (ret < 0) return ret; - if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET)) + if (!(ret & reset_bit)) return 0; usleep_range(100, 200); } @@ -1095,11 +1104,9 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (ret) return ret; - if (id == STMPE1801_ID) { - ret = stmpe1801_reset(stmpe); - if (ret < 0) - return ret; - } + ret = stmpe_reset(stmpe); + if (ret < 0) + return ret; if (stmpe->irq >= 0) { if (id == STMPE801_ID) diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 406f9f2..4ae343d 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -104,6 +104,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE_ICR_LSB_EDGE (1 << 1) #define STMPE_ICR_LSB_GIM (1 << 0) +#define STMPE_SYS_CTRL_RESET (1 << 7) + /* * STMPE801 */ @@ -126,6 +128,7 @@ int stmpe_remove(struct stmpe *stmpe); /* * STMPE811 */ +#define STMPE811_ID 0x0811 #define STMPE811_IRQ_TOUCH_DET 0 #define STMPE811_IRQ_FIFO_TH 1 @@ -155,6 +158,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE811_REG_GPIO_FE 0x16 #define STMPE811_REG_GPIO_AF 0x17 +#define STMPE811_SYS_CTRL_RESET (1 << 1) + #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0) #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1) #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2) @@ -244,8 +249,6 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE1801_REG_GPIO_PULL_UP_MID 0x23 #define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24 -#define STMPE1801_MSK_SYS_CTRL_RESET (1 << 7) - #define STMPE1801_MSK_INT_EN_KPC (1 << 1) #define STMPE1801_MSK_INT_EN_GPIO (1 << 3) |
