summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2006-01-23 16:07:10 -0800
committerDavid S. Miller <davem@davemloft.net>2006-01-23 16:07:10 -0800
commitb090ae2b59f3db57732340c6af3beceec8d6c148 (patch)
treed776af0e28bdbce20be5589c26ceab644778e368
parente29054f92d7d575631691865c1b95bee5bc974cc (diff)
downloadop-kernel-dev-b090ae2b59f3db57732340c6af3beceec8d6c148.zip
op-kernel-dev-b090ae2b59f3db57732340c6af3beceec8d6c148.tar.gz
[BNX2]: Improve handshake with firmware
Improve handshake with bootcode with the following changes: 1. Increase timeout to 100msec and use msleep instead of udelay. 2. Add more error checking for timeouts and errors. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/bnx2.c44
-rw-r--r--drivers/net/bnx2.h4
2 files changed, 25 insertions, 23 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 790dc92..3486324 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1327,43 +1327,45 @@ bnx2_set_mac_loopback(struct bnx2 *bp)
}
static int
-bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
+bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent)
{
int i;
u32 val;
- if (bp->fw_timed_out)
- return -EBUSY;
-
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
/* wait for an acknowledgement. */
- for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
- udelay(5);
+ for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
+ msleep(10);
val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB);
if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
break;
}
+ if ((msg_data & BNX2_DRV_MSG_DATA) == BNX2_DRV_MSG_DATA_WAIT0)
+ return 0;
/* If we timed out, inform the firmware that this is the case. */
- if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) &&
- ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) {
+ if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
+ if (!silent)
+ printk(KERN_ERR PFX "fw sync timeout, reset code = "
+ "%x\n", msg_data);
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
- bp->fw_timed_out = 1;
-
return -EBUSY;
}
+ if ((val & BNX2_FW_MSG_STATUS_MASK) != BNX2_FW_MSG_STATUS_OK)
+ return -EIO;
+
return 0;
}
@@ -2374,7 +2376,7 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg);
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
@@ -3014,16 +3016,14 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
udelay(5);
+ /* Wait for the firmware to tell us it is ok to issue a reset. */
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1);
+
/* Deposit a driver reset signature so the firmware knows that
* this is a soft reset. */
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE,
BNX2_DRV_RESET_SIGNATURE_MAGIC);
- bp->fw_timed_out = 0;
-
- /* Wait for the firmware to tell us it is ok to issue a reset. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code);
-
/* Do a dummy read to force the chip to complete all current transaction
* before we issue a reset. */
val = REG_RD(bp, BNX2_MISC_ID);
@@ -3062,10 +3062,10 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
return -ENODEV;
}
- bp->fw_timed_out = 0;
-
/* Wait for the firmware to finish its initialization. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 0);
+ if (rc)
+ return rc;
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
/* Adjust the voltage regular to two steps lower. The default
@@ -3083,6 +3083,7 @@ static int
bnx2_init_chip(struct bnx2 *bp)
{
u32 val;
+ int rc;
/* Make sure the interrupt is not active. */
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
@@ -3225,14 +3226,15 @@ bnx2_init_chip(struct bnx2 *bp)
/* Initialize the receive filter. */
bnx2_set_rx_mode(bp->dev);
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
+ 0);
REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
udelay(20);
- return 0;
+ return rc;
}
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 8a70311..a99b041 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -3999,7 +3999,7 @@ struct bnx2 {
u16 bus_speed_mhz;
u8 wol;
- u8 fw_timed_out;
+ u8 pad;
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
@@ -4173,7 +4173,7 @@ struct fw_info {
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
-#define FW_ACK_TIME_OUT_MS 50
+#define FW_ACK_TIME_OUT_MS 100
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
OpenPOWER on IntegriCloud