summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2012-09-21 01:06:29 +0000
committerDavid S. Miller <davem@davemloft.net>2012-09-21 14:59:52 -0400
commita630844d898ae8a0b4a3db84af061150682e0d3c (patch)
tree8317ae037bf24b70c0fa00d560f46c724045ed5d
parentbf5b30b8a4416de04f1ac1196281ddb318669464 (diff)
downloadop-kernel-dev-a630844d898ae8a0b4a3db84af061150682e0d3c.zip
op-kernel-dev-a630844d898ae8a0b4a3db84af061150682e0d3c.tar.gz
net/stmmac: Use clk_prepare_enable and clk_disable_unprepare
This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c10
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c6
2 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c136162..3be8833 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev)
} else
priv->tm->enable = 1;
#endif
- clk_enable(priv->stmmac_clk);
+ clk_prepare_enable(priv->stmmac_clk);
stmmac_check_ether_addr(priv);
@@ -1188,7 +1188,7 @@ open_error:
if (priv->phydev)
phy_disconnect(priv->phydev);
- clk_disable(priv->stmmac_clk);
+ clk_disable_unprepare(priv->stmmac_clk);
return ret;
}
@@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
- clk_disable(priv->stmmac_clk);
+ clk_disable_unprepare(priv->stmmac_clk);
return 0;
}
@@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev)
else {
stmmac_set_mac(priv->ioaddr, false);
/* Disable clock in case of PWM is off */
- clk_disable(priv->stmmac_clk);
+ clk_disable_unprepare(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
@@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, 0);
else
/* enable the clk prevously disabled */
- clk_enable(priv->stmmac_clk);
+ clk_prepare_enable(priv->stmmac_clk);
netif_device_attach(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
index 197fb8c..4ccd4e2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
@@ -97,12 +97,12 @@ static struct clk *timer_clock;
static void stmmac_tmu_start(unsigned int new_freq)
{
clk_set_rate(timer_clock, new_freq);
- clk_enable(timer_clock);
+ clk_prepare_enable(timer_clock);
}
static void stmmac_tmu_stop(void)
{
- clk_disable(timer_clock);
+ clk_disable_unprepare(timer_clock);
}
int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
@@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
int stmmac_close_ext_timer(void)
{
- clk_disable(timer_clock);
+ clk_disable_unprepare(timer_clock);
tmu2_unregister_user();
clk_put(timer_clock);
return 0;
OpenPOWER on IntegriCloud