diff options
author | Manuel Stahl <manuel.stahl@iis.fraunhofer.de> | 2013-02-01 08:51:00 +0000 |
---|---|---|
committer | Jonathan Cameron <jic23@kernel.org> | 2013-02-02 09:33:33 +0000 |
commit | 9dbf091da080508e9f632d307f357beb79a0766b (patch) | |
tree | 4f3fe19f392e7b55b2c349cb6df65155ad98d0e8 | |
parent | 420b0fcb523b61eefb347317d3956db3249e968d (diff) | |
download | op-kernel-dev-9dbf091da080508e9f632d307f357beb79a0766b.zip op-kernel-dev-9dbf091da080508e9f632d307f357beb79a0766b.tar.gz |
iio: gyro: Add itg3200
This patch adds support for the InvenSense itg3200.
The itg3200 is a three-axis gyro with 16-bit ADC and
I2C interface.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-rw-r--r-- | drivers/iio/gyro/Kconfig | 8 | ||||
-rw-r--r-- | drivers/iio/gyro/Makefile | 4 | ||||
-rw-r--r-- | drivers/iio/gyro/itg3200_buffer.c | 156 | ||||
-rw-r--r-- | drivers/iio/gyro/itg3200_core.c | 401 | ||||
-rw-r--r-- | include/linux/iio/gyro/itg3200.h | 154 |
5 files changed, 723 insertions, 0 deletions
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 51ac6bc..6be4628 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -70,4 +70,12 @@ config IIO_ST_GYRO_SPI_3AXIS depends on IIO_ST_GYRO_3AXIS depends on IIO_ST_SENSORS_SPI +config ITG3200 + tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver" + depends on I2C + select IIO_TRIGGERED_BUFFER if IIO_BUFFER + help + Say yes here to add support for the InvenSense ITG3200 digital + 3-axis gyroscope sensor. + endmenu diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index eff9bb0..225d289 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -8,6 +8,10 @@ obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o +itg3200-y := itg3200_core.o +itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o +obj-$(CONFIG_ITG3200) += itg3200.o + obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o st_gyro-y := st_gyro_core.o st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c new file mode 100644 index 0000000..f667d2c --- /dev/null +++ b/drivers/iio/gyro/itg3200_buffer.c @@ -0,0 +1,156 @@ +/* + * itg3200_buffer.c -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/gyro/itg3200.h> + + +static int itg3200_read_all_channels(struct i2c_client *i2c, __be16 *buf) +{ + u8 tx = 0x80 | ITG3200_REG_TEMP_OUT_H; + struct i2c_msg msg[2] = { + { + .addr = i2c->addr, + .flags = i2c->flags, + .len = 1, + .buf = &tx, + }, + { + .addr = i2c->addr, + .flags = i2c->flags | I2C_M_RD, + .len = ITG3200_SCAN_ELEMENTS * sizeof(s16), + .buf = (char *)&buf, + }, + }; + + return i2c_transfer(i2c->adapter, msg, 2); +} + +static irqreturn_t itg3200_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct itg3200 *st = iio_priv(indio_dev); + __be16 buf[ITG3200_SCAN_ELEMENTS + sizeof(s64)/sizeof(u16)]; + + int ret = itg3200_read_all_channels(st->i2c, buf); + if (ret < 0) + goto error_ret; + + if (indio_dev->scan_timestamp) + memcpy(buf + indio_dev->scan_bytes - sizeof(s64), + &pf->timestamp, sizeof(pf->timestamp)); + + iio_push_to_buffers(indio_dev, (u8 *)buf); + iio_trigger_notify_done(indio_dev->trig); + +error_ret: + return IRQ_HANDLED; +} + +int itg3200_buffer_configure(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + itg3200_trigger_handler, NULL); +} + +void itg3200_buffer_unconfigure(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + + +static int itg3200_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = trig->private_data; + int ret; + u8 msc; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, &msc); + if (ret) + goto error_ret; + + if (state) + msc |= ITG3200_IRQ_DATA_RDY_ENABLE; + else + msc &= ~ITG3200_IRQ_DATA_RDY_ENABLE; + + ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, msc); + if (ret) + goto error_ret; + +error_ret: + return ret; + +} + +static const struct iio_trigger_ops itg3200_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &itg3200_data_rdy_trigger_set_state, +}; + +int itg3200_probe_trigger(struct iio_dev *indio_dev) +{ + int ret; + struct itg3200 *st = iio_priv(indio_dev); + + st->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, + indio_dev->id); + if (!st->trig) + return -ENOMEM; + + ret = request_irq(st->i2c->irq, + &iio_trigger_generic_data_rdy_poll, + IRQF_TRIGGER_RISING, + "itg3200_data_rdy", + st->trig); + if (ret) + goto error_free_trig; + + + st->trig->dev.parent = &st->i2c->dev; + st->trig->ops = &itg3200_trigger_ops; + st->trig->private_data = indio_dev; + ret = iio_trigger_register(st->trig); + if (ret) + goto error_free_irq; + + /* select default trigger */ + indio_dev->trig = st->trig; + + return 0; + +error_free_irq: + free_irq(st->i2c->irq, st->trig); +error_free_trig: + iio_trigger_free(st->trig); + return ret; +} + +void itg3200_remove_trigger(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + + iio_trigger_unregister(st->trig); + free_irq(st->i2c->irq, st->trig); + iio_trigger_free(st->trig); +} diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c new file mode 100644 index 0000000..df2e6aa --- /dev/null +++ b/drivers/iio/gyro/itg3200_core.c @@ -0,0 +1,401 @@ +/* + * itg3200_core.c -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: + * - Support digital low pass filter + * - Support power management + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> + +#include <linux/iio/gyro/itg3200.h> + + +int itg3200_write_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 val) +{ + struct itg3200 *st = iio_priv(indio_dev); + + return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val); +} + +int itg3200_read_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 *val) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(st->i2c, reg_address); + if (ret < 0) + return ret; + *val = ret; + return 0; +} + +static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address, + int *val) +{ + struct itg3200 *st = iio_priv(indio_dev); + struct i2c_client *client = st->i2c; + int ret; + s16 out; + + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = client->flags, + .len = 1, + .buf = (char *)&lower_reg_address, + }, + { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = 2, + .buf = (char *)&out, + }, + }; + + lower_reg_address |= 0x80; + ret = i2c_transfer(client->adapter, msg, 2); + be16_to_cpus(&out); + *val = out; + + return (ret == 2) ? 0 : ret; +} + +static int itg3200_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long info) +{ + int ret = 0; + u8 reg; + + switch (info) { + case IIO_CHAN_INFO_RAW: + reg = (u8)chan->address; + ret = itg3200_read_reg_s16(indio_dev, reg, val); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + if (chan->type == IIO_TEMP) + *val2 = 1000000000/280; + else + *val2 = 1214142; /* (1 / 14,375) * (PI / 180) */ + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + /* Only the temperature channel has an offset */ + *val = 23000; + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return ret; +} + +static ssize_t itg3200_read_frequency(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + int ret, sps; + u8 val; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val); + if (ret) + return ret; + + sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val); + if (ret) + return ret; + + sps /= val + 1; + + return sprintf(buf, "%d\n", sps); +} + +static ssize_t itg3200_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + unsigned val; + int ret; + u8 t; + + ret = kstrtouint(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t); + if (ret) + goto err_ret; + + if (val == 0) { + ret = -EINVAL; + goto err_ret; + } + t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1; + + ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t); + +err_ret: + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +/* + * Reset device and internal registers to the power-up-default settings + * Use the gyro clock as reference, as suggested by the datasheet + */ +static int itg3200_reset(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + + dev_dbg(&st->i2c->dev, "reset device"); + + ret = itg3200_write_reg_8(indio_dev, + ITG3200_REG_POWER_MANAGEMENT, + ITG3200_RESET); + if (ret) { + dev_err(&st->i2c->dev, "error resetting device"); + goto error_ret; + } + + /* Wait for PLL (1ms according to datasheet) */ + udelay(1500); + + ret = itg3200_write_reg_8(indio_dev, + ITG3200_REG_IRQ_CONFIG, + ITG3200_IRQ_ACTIVE_HIGH | + ITG3200_IRQ_PUSH_PULL | + ITG3200_IRQ_LATCH_50US_PULSE | + ITG3200_IRQ_LATCH_CLEAR_ANY); + + if (ret) + dev_err(&st->i2c->dev, "error init device"); + +error_ret: + return ret; +} + +/* itg3200_enable_full_scale() - Disables the digital low pass filter */ +static int itg3200_enable_full_scale(struct iio_dev *indio_dev) +{ + u8 val; + int ret; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val); + if (ret) + goto err_ret; + + val |= ITG3200_DLPF_FS_SEL_2000; + return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val); + +err_ret: + return ret; +} + +static int itg3200_initial_setup(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + u8 val; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val); + if (ret) + goto err_ret; + + if (((val >> 1) & 0x3f) != 0x34) { + dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val); + ret = -ENXIO; + goto err_ret; + } + + ret = itg3200_reset(indio_dev); + if (ret) + goto err_ret; + + ret = itg3200_enable_full_scale(indio_dev); +err_ret: + return ret; +} + +#define ITG3200_TEMP_INFO_MASK (IIO_CHAN_INFO_OFFSET_SHARED_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_RAW_SEPARATE_BIT) +#define ITG3200_GYRO_INFO_MASK (IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_RAW_SEPARATE_BIT) + +#define ITG3200_ST \ + { .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE } + +#define ITG3200_GYRO_CHAN(_mod) { \ + .type = IIO_ANGL_VEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .info_mask = ITG3200_GYRO_INFO_MASK, \ + .address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \ + .scan_index = ITG3200_SCAN_GYRO_ ## _mod, \ + .scan_type = ITG3200_ST, \ +} + +static const struct iio_chan_spec itg3200_channels[] = { + { + .type = IIO_TEMP, + .channel2 = IIO_NO_MOD, + .info_mask = ITG3200_TEMP_INFO_MASK, + .address = ITG3200_REG_TEMP_OUT_H, + .scan_index = ITG3200_SCAN_TEMP, + .scan_type = ITG3200_ST, + }, + ITG3200_GYRO_CHAN(X), + ITG3200_GYRO_CHAN(Y), + ITG3200_GYRO_CHAN(Z), + IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS), +}; + +/* IIO device attributes */ +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency, + itg3200_write_frequency); + +static struct attribute *itg3200_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL +}; + +static const struct attribute_group itg3200_attribute_group = { + .attrs = itg3200_attributes, +}; + +static const struct iio_info itg3200_info = { + .attrs = &itg3200_attribute_group, + .read_raw = &itg3200_read_raw, + .driver_module = THIS_MODULE, +}; + +static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 }; + +static int itg3200_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct itg3200 *st; + struct iio_dev *indio_dev; + + dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq); + + indio_dev = iio_device_alloc(sizeof(*st)); + if (indio_dev == NULL) { + ret = -ENOMEM; + goto error_ret; + } + + st = iio_priv(indio_dev); + + i2c_set_clientdata(client, indio_dev); + st->i2c = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = client->dev.driver->name; + indio_dev->channels = itg3200_channels; + indio_dev->num_channels = ARRAY_SIZE(itg3200_channels); + indio_dev->available_scan_masks = itg3200_available_scan_masks; + indio_dev->info = &itg3200_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = itg3200_buffer_configure(indio_dev); + if (ret) + goto error_free_dev; + + if (client->irq) { + ret = itg3200_probe_trigger(indio_dev); + if (ret) + goto error_unconfigure_buffer; + } + + ret = itg3200_initial_setup(indio_dev); + if (ret) + goto error_remove_trigger; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_remove_trigger; + + return 0; + +error_remove_trigger: + if (client->irq) + itg3200_remove_trigger(indio_dev); +error_unconfigure_buffer: + itg3200_buffer_unconfigure(indio_dev); +error_free_dev: + iio_device_free(indio_dev); +error_ret: + return ret; +} + +static int itg3200_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + + if (client->irq) + itg3200_remove_trigger(indio_dev); + + itg3200_buffer_unconfigure(indio_dev); + + iio_device_free(indio_dev); + + return 0; +} + +static const struct i2c_device_id itg3200_id[] = { + { "itg3200", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, itg3200_id); + +static struct i2c_driver itg3200_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "itg3200", + }, + .id_table = itg3200_id, + .probe = itg3200_probe, + .remove = itg3200_remove, +}; + +module_i2c_driver(itg3200_driver); + +MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>"); +MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h new file mode 100644 index 0000000..c53f169 --- /dev/null +++ b/include/linux/iio/gyro/itg3200.h @@ -0,0 +1,154 @@ +/* + * itg3200.h -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef I2C_ITG3200_H_ +#define I2C_ITG3200_H_ + +#include <linux/iio/iio.h> + +/* Register with I2C address (34h) */ +#define ITG3200_REG_ADDRESS 0x00 + +/* Sample rate divider + * Range: 0 to 255 + * Default value: 0x00 */ +#define ITG3200_REG_SAMPLE_RATE_DIV 0x15 + +/* Digital low pass filter settings */ +#define ITG3200_REG_DLPF 0x16 +/* DLPF full scale range */ +#define ITG3200_DLPF_FS_SEL_2000 0x18 +/* Bandwidth (Hz) and internal sample rate + * (kHz) of DLPF */ +#define ITG3200_DLPF_256_8 0x00 +#define ITG3200_DLPF_188_1 0x01 +#define ITG3200_DLPF_98_1 0x02 +#define ITG3200_DLPF_42_1 0x03 +#define ITG3200_DLPF_20_1 0x04 +#define ITG3200_DLPF_10_1 0x05 +#define ITG3200_DLPF_5_1 0x06 + +#define ITG3200_DLPF_CFG_MASK 0x07 + +/* Configuration for interrupt operations */ +#define ITG3200_REG_IRQ_CONFIG 0x17 +/* Logic level */ +#define ITG3200_IRQ_ACTIVE_LOW 0x80 +#define ITG3200_IRQ_ACTIVE_HIGH 0x00 +/* Drive type */ +#define ITG3200_IRQ_OPEN_DRAIN 0x40 +#define ITG3200_IRQ_PUSH_PULL 0x00 +/* Latch mode */ +#define ITG3200_IRQ_LATCH_UNTIL_CLEARED 0x20 +#define ITG3200_IRQ_LATCH_50US_PULSE 0x00 +/* Latch clear method */ +#define ITG3200_IRQ_LATCH_CLEAR_ANY 0x10 +#define ITG3200_IRQ_LATCH_CLEAR_STATUS 0x00 +/* Enable interrupt when device is ready */ +#define ITG3200_IRQ_DEVICE_RDY_ENABLE 0x04 +/* Enable interrupt when data is available */ +#define ITG3200_IRQ_DATA_RDY_ENABLE 0x01 + +/* Determine the status of ITG-3200 interrupts */ +#define ITG3200_REG_IRQ_STATUS 0x1A +/* Status of 'device is ready'-interrupt */ +#define ITG3200_IRQ_DEVICE_RDY_STATUS 0x04 +/* Status of 'data is available'-interrupt */ +#define ITG3200_IRQ_DATA_RDY_STATUS 0x01 + +/* Sensor registers */ +#define ITG3200_REG_TEMP_OUT_H 0x1B +#define ITG3200_REG_TEMP_OUT_L 0x1C +#define ITG3200_REG_GYRO_XOUT_H 0x1D +#define ITG3200_REG_GYRO_XOUT_L 0x1E +#define ITG3200_REG_GYRO_YOUT_H 0x1F +#define ITG3200_REG_GYRO_YOUT_L 0x20 +#define ITG3200_REG_GYRO_ZOUT_H 0x21 +#define ITG3200_REG_GYRO_ZOUT_L 0x22 + +/* Power management */ +#define ITG3200_REG_POWER_MANAGEMENT 0x3E +/* Reset device and internal registers to the + * power-up-default settings */ +#define ITG3200_RESET 0x80 +/* Enable low power sleep mode */ +#define ITG3200_SLEEP 0x40 +/* Put according gyroscope in standby mode */ +#define ITG3200_STANDBY_GYRO_X 0x20 +#define ITG3200_STANDBY_GYRO_Y 0x10 +#define ITG3200_STANDBY_GYRO_Z 0x08 +/* Determine the device clock source */ +#define ITG3200_CLK_INTERNAL 0x00 +#define ITG3200_CLK_GYRO_X 0x01 +#define ITG3200_CLK_GYRO_Y 0x02 +#define ITG3200_CLK_GYRO_Z 0x03 +#define ITG3200_CLK_EXT_32K 0x04 +#define ITG3200_CLK_EXT_19M 0x05 + + +/** + * struct itg3200 - device instance specific data + * @i2c: actual i2c_client + * @trig: data ready trigger from itg3200 pin + **/ +struct itg3200 { + struct i2c_client *i2c; + struct iio_trigger *trig; +}; + +enum ITG3200_SCAN_INDEX { + ITG3200_SCAN_TEMP, + ITG3200_SCAN_GYRO_X, + ITG3200_SCAN_GYRO_Y, + ITG3200_SCAN_GYRO_Z, + ITG3200_SCAN_ELEMENTS, +}; + +int itg3200_write_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 val); + +int itg3200_read_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 *val); + + +#ifdef CONFIG_IIO_BUFFER + +void itg3200_remove_trigger(struct iio_dev *indio_dev); +int itg3200_probe_trigger(struct iio_dev *indio_dev); + +int itg3200_buffer_configure(struct iio_dev *indio_dev); +void itg3200_buffer_unconfigure(struct iio_dev *indio_dev); + +#else /* CONFIG_IIO_BUFFER */ + +static inline void itg3200_remove_trigger(struct iio_dev *indio_dev) +{ +} + +static inline int itg3200_probe_trigger(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline int itg3200_buffer_configure(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev) +{ +} + +#endif /* CONFIG_IIO_RING_BUFFER */ + +#endif /* ITG3200_H_ */ |