bnx2x: Fix grammar and relocate code

This patch relocates some functions as a preparation for next patches, and also fixes some grammar mistakes.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 276 insertions, 266 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 6c70e86..81bcd61 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -509,7 +509,7 @@ static void bnx2x_emac_init(struct link_params *params,
 }
 
 static int bnx2x_emac_enable(struct link_params *params,
-			      struct link_vars *vars, u8 lb)
+			     struct link_vars *vars, u8 lb)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
@@ -1613,7 +1613,172 @@ static void bnx2x_xgxs_deassert(struct link_params *params)
 	       params->phy[INT_PHY].def_md_devad);
 }
 
+static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
+				     struct link_params *params, u16 *ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
+	/**
+	 * resolve pause mode and advertisement Please refer to Table
+	 * 28B-3 of the 802.3ab-1999 spec
+	 */
+
+	switch (phy->req_flow_ctrl) {
+	case BNX2X_FLOW_CTRL_AUTO:
+		if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH)
+			*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		else
+			*ieee_fc |=
+			MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+		break;
+
+	case BNX2X_FLOW_CTRL_TX:
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+		break;
+
+	case BNX2X_FLOW_CTRL_RX:
+	case BNX2X_FLOW_CTRL_BOTH:
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		break;
+
+	case BNX2X_FLOW_CTRL_NONE:
+	default:
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+		break;
+	}
+	DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
+}
+
+static void set_phy_vars(struct link_params *params,
+			 struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 actual_phy_idx, phy_index, link_cfg_idx;
+	u8 phy_config_swapped = params->multi_phy_config &
+			PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+	for (phy_index = INT_PHY; phy_index < params->num_phys;
+	      phy_index++) {
+		link_cfg_idx = LINK_CONFIG_IDX(phy_index);
+		actual_phy_idx = phy_index;
+		if (phy_config_swapped) {
+			if (phy_index == EXT_PHY1)
+				actual_phy_idx = EXT_PHY2;
+			else if (phy_index == EXT_PHY2)
+				actual_phy_idx = EXT_PHY1;
+		}
+		params->phy[actual_phy_idx].req_flow_ctrl =
+			params->req_flow_ctrl[link_cfg_idx];
+
+		params->phy[actual_phy_idx].req_line_speed =
+			params->req_line_speed[link_cfg_idx];
+
+		params->phy[actual_phy_idx].speed_cap_mask =
+			params->speed_cap_mask[link_cfg_idx];
 
+		params->phy[actual_phy_idx].req_duplex =
+			params->req_duplex[link_cfg_idx];
+
+		if (params->req_line_speed[link_cfg_idx] ==
+		    SPEED_AUTO_NEG)
+			vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
+
+		DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"
+			   " speed_cap_mask %x\n",
+			   params->phy[actual_phy_idx].req_flow_ctrl,
+			   params->phy[actual_phy_idx].req_line_speed,
+			   params->phy[actual_phy_idx].speed_cap_mask);
+	}
+}
+
+static void bnx2x_ext_phy_set_pause(struct link_params *params,
+				    struct bnx2x_phy *phy,
+				    struct link_vars *vars)
+{
+	u16 val;
+	struct bnx2x *bp = params->bp;
+	/* read modify write pause advertizing */
+	bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val);
+
+	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+	bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
+	}
+	DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val);
+	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
+}
+
+static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
+{						/*  LD	    LP	 */
+	switch (pause_result) {			/* ASYM P ASYM P */
+	case 0xb:				/*   1  0   1  1 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
+		break;
+
+	case 0xe:				/*   1  1   1  0 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
+		break;
+
+	case 0x5:				/*   0  1   0  1 */
+	case 0x7:				/*   0  1   1  1 */
+	case 0xd:				/*   1  1   0  1 */
+	case 0xf:				/*   1  1   1  1 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
+		break;
+
+	default:
+		break;
+	}
+	if (pause_result & (1<<0))
+		vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
+	if (pause_result & (1<<1))
+		vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;
+}
+
+static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
+				   struct link_params *params,
+				   struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 ld_pause;		/* local */
+	u16 lp_pause;		/* link partner */
+	u16 pause_result;
+	u8 ret = 0;
+	/* read twice */
+
+	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+	if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO)
+		vars->flow_ctrl = phy->req_flow_ctrl;
+	else if (phy->req_line_speed != SPEED_AUTO_NEG)
+		vars->flow_ctrl = params->req_fc_auto_adv;
+	else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
+		ret = 1;
+		bnx2x_cl45_read(bp, phy,
+				MDIO_AN_DEVAD,
+				MDIO_AN_REG_ADV_PAUSE, &ld_pause);
+		bnx2x_cl45_read(bp, phy,
+				MDIO_AN_DEVAD,
+				MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
+		pause_result = (ld_pause &
+				MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
+		pause_result |= (lp_pause &
+				 MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
+		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
+		   pause_result);
+		bnx2x_pause_resolve(vars, pause_result);
+	}
+	return ret;
+}
 void bnx2x_link_status_update(struct link_params *params,
 			      struct link_vars *vars)
 {
@@ -2078,8 +2243,8 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy,
 
 }
 
-static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy,
-					     struct link_params *params)
+static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy,
+					      struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
 	u16 val = 0;
@@ -2100,44 +2265,9 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy,
 			  MDIO_OVER_1G_UP3, 0x400);
 }
 
-static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
-				     struct link_params *params, u16 *ieee_fc)
-{
-	struct bnx2x *bp = params->bp;
-	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-	/*
-	 * Resolve pause mode and advertisement.
-	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec
-	 */
-
-	switch (phy->req_flow_ctrl) {
-	case BNX2X_FLOW_CTRL_AUTO:
-		if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH)
-			*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
-		else
-			*ieee_fc |=
-			MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
-		break;
-	case BNX2X_FLOW_CTRL_TX:
-		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
-		break;
-
-	case BNX2X_FLOW_CTRL_RX:
-	case BNX2X_FLOW_CTRL_BOTH:
-		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
-		break;
-
-	case BNX2X_FLOW_CTRL_NONE:
-	default:
-		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-		break;
-	}
-	DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
-}
-
-static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x_phy *phy,
-					     struct link_params *params,
-					     u16 ieee_fc)
+static void bnx2x_set_ieee_aneg_advertisement(struct bnx2x_phy *phy,
+					      struct link_params *params,
+					      u16 ieee_fc)
 {
 	struct bnx2x *bp = params->bp;
 	u16 val;
@@ -2271,33 +2401,6 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy,
  * link management
  */
 
-static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{						/*  LD	    LP	 */
-	switch (pause_result) {			/* ASYM P ASYM P */
-	case 0xb:				/*   1  0   1  1 */
-		vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
-		break;
-
-	case 0xe:				/*   1  1   1  0 */
-		vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
-		break;
-
-	case 0x5:				/*   0  1   0  1 */
-	case 0x7:				/*   0  1   1  1 */
-	case 0xd:				/*   1  1   0  1 */
-	case 0xf:				/*   1  1   1  1 */
-		vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
-		break;
-
-	default:
-		break;
-	}
-	if (pause_result & (1<<0))
-		vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
-	if (pause_result & (1<<1))
-		vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;
-}
-
 static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy,
 					     struct link_params *params)
 {
@@ -2402,7 +2505,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy,
 					 struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
-	u16 rx_status, ustat_val, cl37_fsm_recieved;
+	u16 rx_status, ustat_val, cl37_fsm_received;
 	DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n");
 	/* Step 1: Make sure signal is detected */
 	CL22_RD_OVER_CL45(bp, phy,
@@ -2440,15 +2543,15 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy,
 	CL22_RD_OVER_CL45(bp, phy,
 			  MDIO_REG_BANK_REMOTE_PHY,
 			  MDIO_REMOTE_PHY_MISC_RX_STATUS,
-			  &cl37_fsm_recieved);
-	if ((cl37_fsm_recieved &
+			  &cl37_fsm_received);
+	if ((cl37_fsm_received &
 	     (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
 	     MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
 	    (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
 	      MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
 		DP(NETIF_MSG_LINK, "No CL37 FSM were received. "
 			     "misc_rx_status(0x8330) = 0x%x\n",
-			 cl37_fsm_recieved);
+			 cl37_fsm_received);
 		return;
 	}
 	/*
@@ -2761,11 +2864,11 @@ static void bnx2x_init_internal_phy(struct bnx2x_phy *phy,
 			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
 
 			/* AN enabled */
-			bnx2x_set_brcm_cl37_advertisment(phy, params);
+			bnx2x_set_brcm_cl37_advertisement(phy, params);
 
 			/* program duplex & pause advertisement (for aneg) */
-			bnx2x_set_ieee_aneg_advertisment(phy, params,
-							 vars->ieee_fc);
+			bnx2x_set_ieee_aneg_advertisement(phy, params,
+							  vars->ieee_fc);
 
 			/* enable autoneg */
 			bnx2x_set_autoneg(phy, params, vars, enable_cl73);
@@ -3338,7 +3441,8 @@ static int bnx2x_link_initialize(struct link_params *params,
 			if (phy_index == EXT_PHY2 &&
 			    (bnx2x_phy_selection(params) ==
 			     PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
-				DP(NETIF_MSG_LINK, "Ignoring second phy\n");
+				DP(NETIF_MSG_LINK, "Not initializing"
+						" second phy\n");
 				continue;
 			}
 			params->phy[phy_index].config_init(
@@ -3520,7 +3624,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	 * Step 1:
 	 * Check external link change only for external phys, and apply
 	 * priority selection between them in case the link on both phys
-	 * is up. Note that the instead of the common vars, a temporary
+	 * is up. Note that instead of the common vars, a temporary
 	 * vars argument is used since each phy may have different link/
 	 * speed/duplex result
 	 */
@@ -3704,7 +3808,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	}
 	/*
 	 * Link is up only if both local phy and external phy (in case of
-	 * non-direct board) are up
+	 * non-direct board) are up and no fault detected on active PHY.
 	 */
 	vars->link_up = (vars->phy_link_up &&
 			 (ext_phy_link_up ||
@@ -3756,69 +3860,6 @@ static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp,
 				  phy->ver_addr);
 }
 
-static void bnx2x_ext_phy_set_pause(struct link_params *params,
-				    struct bnx2x_phy *phy,
-				    struct link_vars *vars)
-{
-	u16 val;
-	struct bnx2x *bp = params->bp;
-	/* read modify write pause advertizing */
-	bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val);
-
-	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
-
-	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
-	bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
-	if ((vars->ieee_fc &
-	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
-	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
-		val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
-	}
-	if ((vars->ieee_fc &
-	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
-	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
-		val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
-	}
-	DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val);
-	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
-}
-
-static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
-				   struct link_params *params,
-				   struct link_vars *vars)
-{
-	struct bnx2x *bp = params->bp;
-	u16 ld_pause;		/* local */
-	u16 lp_pause;		/* link partner */
-	u16 pause_result;
-	u8 ret = 0;
-	/* read twice */
-
-	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
-
-	if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO)
-		vars->flow_ctrl = phy->req_flow_ctrl;
-	else if (phy->req_line_speed != SPEED_AUTO_NEG)
-		vars->flow_ctrl = params->req_fc_auto_adv;
-	else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
-		ret = 1;
-		bnx2x_cl45_read(bp, phy,
-				MDIO_AN_DEVAD,
-				MDIO_AN_REG_ADV_PAUSE, &ld_pause);
-		bnx2x_cl45_read(bp, phy,
-				MDIO_AN_DEVAD,
-				MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
-		pause_result = (ld_pause &
-				MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
-		pause_result |= (lp_pause &
-				 MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
-		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
-		   pause_result);
-		bnx2x_pause_resolve(vars, pause_result);
-	}
-	return ret;
-}
-
 static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp,
 				       struct bnx2x_phy *phy,
 				       struct link_vars *vars)
@@ -4732,8 +4773,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 					       params,
 					       SFP_EEPROM_FC_TX_TECH_ADDR,
 					       1,
-					       &copper_module_type) !=
-		    0) {
+					       &copper_module_type) != 0) {
 			DP(NETIF_MSG_LINK,
 				"Failed to read copper-cable-type"
 				" from SFP+ EEPROM\n");
@@ -5938,7 +5978,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
 	if (!lasi_ctrl)
 		return 0;
 
-	/* Check the LASI */
+	/* Check the LASI on Rx */
 	bnx2x_cl45_read(bp, phy,
 			MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
 			&rx_alarm_status);
@@ -6322,10 +6362,10 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 	    (phy->speed_cap_mask &
 	     PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
 		(phy->req_line_speed == SPEED_10000)) {
-		DP(NETIF_MSG_LINK, "Advertising 10G\n");
-		/* Restart autoneg for 10G*/
+			DP(NETIF_MSG_LINK, "Advertising 10G\n");
+			/* Restart autoneg for 10G*/
 
-		bnx2x_cl45_write(bp, phy,
+			bnx2x_cl45_write(bp, phy,
 				 MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
 				 0x3200);
 	} else if (phy->req_line_speed != SPEED_10 &&
@@ -7031,9 +7071,8 @@ static void bnx2x_7101_set_link_led(struct bnx2x_phy *phy,
 static struct bnx2x_phy phy_null = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN,
 	.addr		= 0,
-	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7058,9 +7097,8 @@ static struct bnx2x_phy phy_null = {
 static struct bnx2x_phy phy_serdes = {
 	.type		= PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT,
 	.addr		= 0xff,
-	.flags		= 0,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7094,9 +7132,8 @@ static struct bnx2x_phy phy_serdes = {
 static struct bnx2x_phy phy_xgxs = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
 	.addr		= 0xff,
-	.flags		= 0,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7131,9 +7168,8 @@ static struct bnx2x_phy phy_xgxs = {
 static struct bnx2x_phy phy_7101 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
 	.addr		= 0xff,
-	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7161,9 +7197,8 @@ static struct bnx2x_phy phy_7101 = {
 static struct bnx2x_phy phy_8073 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
 	.addr		= 0xff,
-	.flags		= FLAGS_HW_LOCK_REQUIRED,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_HW_LOCK_REQUIRED,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7193,9 +7228,8 @@ static struct bnx2x_phy phy_8073 = {
 static struct bnx2x_phy phy_8705 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705,
 	.addr		= 0xff,
-	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7222,9 +7256,8 @@ static struct bnx2x_phy phy_8705 = {
 static struct bnx2x_phy phy_8706 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
 	.addr		= 0xff,
-	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7253,10 +7286,9 @@ static struct bnx2x_phy phy_8706 = {
 static struct bnx2x_phy phy_8726 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
 	.addr		= 0xff,
+	.def_md_devad	= 0,
 	.flags		= (FLAGS_HW_LOCK_REQUIRED |
 			   FLAGS_INIT_XGXS_FIRST),
-	.def_md_devad	= 0,
-	.reserved	= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7286,9 +7318,8 @@ static struct bnx2x_phy phy_8726 = {
 static struct bnx2x_phy phy_8727 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
 	.addr		= 0xff,
-	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
 	.def_md_devad	= 0,
-	.reserved	= 0,
+	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7316,10 +7347,9 @@ static struct bnx2x_phy phy_8727 = {
 static struct bnx2x_phy phy_8481 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
 	.addr		= 0xff,
+	.def_md_devad	= 0,
 	.flags		= FLAGS_FAN_FAILURE_DET_REQ |
 			  FLAGS_REARM_LATCH_SIGNAL,
-	.def_md_devad	= 0,
-	.reserved	= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7353,10 +7383,9 @@ static struct bnx2x_phy phy_8481 = {
 static struct bnx2x_phy phy_84823 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823,
 	.addr		= 0xff,
+	.def_md_devad	= 0,
 	.flags		= FLAGS_FAN_FAILURE_DET_REQ |
 			  FLAGS_REARM_LATCH_SIGNAL,
-	.def_md_devad	= 0,
-	.reserved	= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7390,10 +7419,9 @@ static struct bnx2x_phy phy_84823 = {
 static struct bnx2x_phy phy_84833 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833,
 	.addr		= 0xff,
+	.def_md_devad	= 0,
 	.flags		= FLAGS_FAN_FAILURE_DET_REQ |
 			    FLAGS_REARM_LATCH_SIGNAL,
-	.def_md_devad	= 0,
-	.reserved	= 0,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -7827,77 +7855,10 @@ int bnx2x_phy_probe(struct link_params *params)
 	return 0;
 }
 
-static void set_phy_vars(struct link_params *params)
-{
-	struct bnx2x *bp = params->bp;
-	u8 actual_phy_idx, phy_index, link_cfg_idx;
-	u8 phy_config_swapped = params->multi_phy_config &
-			PORT_HW_CFG_PHY_SWAPPED_ENABLED;
-	for (phy_index = INT_PHY; phy_index < params->num_phys;
-	      phy_index++) {
-		link_cfg_idx = LINK_CONFIG_IDX(phy_index);
-		actual_phy_idx = phy_index;
-		if (phy_config_swapped) {
-			if (phy_index == EXT_PHY1)
-				actual_phy_idx = EXT_PHY2;
-			else if (phy_index == EXT_PHY2)
-				actual_phy_idx = EXT_PHY1;
-		}
-		params->phy[actual_phy_idx].req_flow_ctrl =
-			params->req_flow_ctrl[link_cfg_idx];
-
-		params->phy[actual_phy_idx].req_line_speed =
-			params->req_line_speed[link_cfg_idx];
-
-		params->phy[actual_phy_idx].speed_cap_mask =
-			params->speed_cap_mask[link_cfg_idx];
-
-		params->phy[actual_phy_idx].req_duplex =
-			params->req_duplex[link_cfg_idx];
-
-		DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"
-			   " speed_cap_mask %x\n",
-			   params->phy[actual_phy_idx].req_flow_ctrl,
-			   params->phy[actual_phy_idx].req_line_speed,
-			   params->phy[actual_phy_idx].speed_cap_mask);
-	}
-}
-
-int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
+void bnx2x_init_bmac_loopback(struct link_params *params,
+			      struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
-	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
-	DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",
-		   params->req_line_speed[0], params->req_flow_ctrl[0]);
-	DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",
-		   params->req_line_speed[1], params->req_flow_ctrl[1]);
-	vars->link_status = 0;
-	vars->phy_link_up = 0;
-	vars->link_up = 0;
-	vars->line_speed = 0;
-	vars->duplex = DUPLEX_FULL;
-	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
-	vars->mac_type = MAC_TYPE_NONE;
-	vars->phy_flags = 0;
-
-	/* disable attentions */
-	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
-		       (NIG_MASK_XGXS0_LINK_STATUS |
-			NIG_MASK_XGXS0_LINK10G |
-			NIG_MASK_SERDES0_LINK_STATUS |
-			NIG_MASK_MI_INT));
-
-	bnx2x_emac_init(params, vars);
-
-	if (params->num_phys == 0) {
-		DP(NETIF_MSG_LINK, "No phy found for initialization !!\n");
-		return -EINVAL;
-	}
-	set_phy_vars(params);
-
-	DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys);
-	if (params->loopback_mode == LOOPBACK_BMAC) {
-
 		vars->link_up = 1;
 		vars->line_speed = SPEED_10000;
 		vars->duplex = DUPLEX_FULL;
@@ -7912,9 +7873,12 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		bnx2x_bmac_enable(params, vars, 1);
 
 		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
 
-	} else if (params->loopback_mode == LOOPBACK_EMAC) {
-
+void bnx2x_init_emac_loopback(struct link_params *params,
+			      struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
 		vars->link_up = 1;
 		vars->line_speed = SPEED_1000;
 		vars->duplex = DUPLEX_FULL;
@@ -7928,29 +7892,32 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		bnx2x_emac_enable(params, vars, 1);
 		bnx2x_emac_program(params, vars);
 		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
 
-	} else if ((params->loopback_mode == LOOPBACK_XGXS) ||
-		   (params->loopback_mode == LOOPBACK_EXT_PHY)) {
-
+void bnx2x_init_xgxs_loopback(struct link_params *params,
+			      struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
 		vars->link_up = 1;
 		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 		vars->duplex = DUPLEX_FULL;
-		if (params->req_line_speed[0] == SPEED_1000) {
+	if (params->req_line_speed[0] == SPEED_1000)
 			vars->line_speed = SPEED_1000;
-			vars->mac_type = MAC_TYPE_EMAC;
-		} else {
+	else
 			vars->line_speed = SPEED_10000;
-			vars->mac_type = MAC_TYPE_BMAC;
-		}
 
-		bnx2x_xgxs_deassert(params);
-		bnx2x_link_initialize(params, vars);
 
-		if (params->req_line_speed[0] == SPEED_1000) {
-			bnx2x_emac_program(params, vars);
-			bnx2x_emac_enable(params, vars, 0);
-		} else
-			bnx2x_bmac_enable(params, vars, 0);
+	bnx2x_xgxs_deassert(params);
+	bnx2x_link_initialize(params, vars);
+
+	if (params->req_line_speed[0] == SPEED_1000) {
+		bnx2x_emac_program(params, vars);
+		bnx2x_emac_enable(params, vars, 0);
+
+	} else
+		bnx2x_bmac_enable(params, vars, 0);
+
+
 		if (params->loopback_mode == LOOPBACK_XGXS) {
 			/* set 10G XGXS loopback */
 			params->phy[INT_PHY].config_loopback(
@@ -7970,11 +7937,55 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
 
-		bnx2x_set_led(params, vars,
-			      LED_MODE_OPER, vars->line_speed);
-	} else
-	/* No loopback */
-	{
+	bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed);
+}
+
+int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+	DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",
+		   params->req_line_speed[0], params->req_flow_ctrl[0]);
+	DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",
+		   params->req_line_speed[1], params->req_flow_ctrl[1]);
+	vars->link_status = 0;
+	vars->phy_link_up = 0;
+	vars->link_up = 0;
+	vars->line_speed = 0;
+	vars->duplex = DUPLEX_FULL;
+	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+	vars->mac_type = MAC_TYPE_NONE;
+	vars->phy_flags = 0;
+
+	/* disable attentions */
+	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
+		       (NIG_MASK_XGXS0_LINK_STATUS |
+			NIG_MASK_XGXS0_LINK10G |
+			NIG_MASK_SERDES0_LINK_STATUS |
+			NIG_MASK_MI_INT));
+
+	bnx2x_emac_init(params, vars);
+
+	if (params->num_phys == 0) {
+		DP(NETIF_MSG_LINK, "No phy found for initialization !!\n");
+		return -EINVAL;
+	}
+	set_phy_vars(params, vars);
+
+	DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys);
+	switch (params->loopback_mode) {
+	case LOOPBACK_BMAC:
+		bnx2x_init_bmac_loopback(params, vars);
+		break;
+	case LOOPBACK_EMAC:
+		bnx2x_init_emac_loopback(params, vars);
+		break;
+	case LOOPBACK_XGXS:
+	case LOOPBACK_EXT_PHY:
+		bnx2x_init_xgxs_loopback(params, vars);
+		break;
+	default:
+		/* No loopback */
 		if (params->switch_cfg == SWITCH_CFG_10G)
 			bnx2x_xgxs_deassert(params);
 		else
@@ -7983,6 +7994,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		bnx2x_link_initialize(params, vars);
 		msleep(30);
 		bnx2x_link_int_enable(params);
+		break;
 	}
 	return 0;
 }
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 4d5509b..906b511 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -121,8 +121,8 @@ struct bnx2x_phy {
 
 	/* Loaded during init */
 	u8 addr;
-
-	u8 flags;
+	u8 def_md_devad;
+	u16 flags;
 	/* Require HW lock */
 #define FLAGS_HW_LOCK_REQUIRED		(1<<0)
 	/* No Over-Current detection */
@@ -134,8 +134,6 @@ struct bnx2x_phy {
 #define FLAGS_REARM_LATCH_SIGNAL	(1<<6)
 #define FLAGS_SFP_NOT_APPROVED		(1<<7)
 
-	u8 def_md_devad;
-	u8 reserved;
 	/* preemphasis values for the rx side */
 	u16 rx_preemphasis[4];