pinctrl: nomadik: move platform data handling into driver

This decomissions the platform data header (which is no longer
in use after the systems using this driver were switched to
a pure device-tree config path) and merges the result into
the driver file or local driver header.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 227 insertions, 245 deletions

diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 7111c3b..3895f14 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -33,7 +33,6 @@
 #include <linux/pinctrl/pinconf.h>
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include "pinctrl-nomadik.h"
 #include "core.h"
 
@@ -45,6 +44,221 @@
  * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
  */
 
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *	bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *	bit  9..10 - Alternate Function Selection
+ *	bit 11..12 - Pull up/down state
+ *	bit     13 - Sleep mode behaviour
+ *	bit     14 - Direction
+ *	bit     15 - Value (if output)
+ *	bit 16..18 - SLPM pull up/down state
+ *	bit 19..20 - SLPM direction
+ *	bit 21..22 - SLPM Value (if output)
+ *	bit 23..25 - PDIS value (if input)
+ *	bit	26 - Gpio mode
+ *	bit	27 - Sleep mode
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *		     pull up/down = disabled
+ *		     sleep mode = input/wakeup
+ *		     direction = input
+ *		     value = low
+ *		     SLPM direction = same as normal
+ *		     SLPM pull = same as normal
+ *		     SLPM value = same as normal
+ *
+ * PIN_CFG	   - default config with alternate function
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK		0x1ff
+#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT		9
+#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT		11
+#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT		13
+#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
+
+#define PIN_DIR_SHIFT		14
+#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT		15
+#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT	16
+#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)	\
+	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE	\
+	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP	\
+	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN	\
+	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT	19
+#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)		\
+	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT	21
+#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)		\
+	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+#define PIN_SLPM_PDIS_SHIFT		23
+#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x)	\
+	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT	25
+#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT	26
+#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT	27
+#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
+
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT		(0)
+
+#define PIN_CFG(num, alt)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+#define NMK_GPIO_LOWEMI	0x28
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL	0x60
+
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int num_gpio;
+	u32 (*get_secondary_status)(unsigned int bank);
+	void (*set_ioforce)(bool enable);
+	bool supports_sleepmode;
+};
+
 struct nmk_gpio_chip {
 	struct gpio_chip chip;
 	struct irq_domain *domain;
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index bcd4191..d8215f1 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,13 +1,23 @@
 #ifndef PINCTRL_PINCTRL_NOMADIK_H
 #define PINCTRL_PINCTRL_NOMADIK_H
 
-#include <linux/platform_data/pinctrl-nomadik.h>
-
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0
 #define PINCTRL_NMK_DB8500	1
 #define PINCTRL_NMK_DB8540	2
 
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
 #define PRCM_GPIOCR_ALTCX(pin_num,\
 	altc1_used, altc1_ri, altc1_cb,\
 	altc2_used, altc2_ri, altc2_cb,\
diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
deleted file mode 100644
index abf5bed..0000000
--- a/include/linux/platform_data/pinctrl-nomadik.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- *	bit  0.. 8 - Pin Number (512 Pins Maximum)
- *	bit  9..10 - Alternate Function Selection
- *	bit 11..12 - Pull up/down state
- *	bit     13 - Sleep mode behaviour
- *	bit     14 - Direction
- *	bit     15 - Value (if output)
- *	bit 16..18 - SLPM pull up/down state
- *	bit 19..20 - SLPM direction
- *	bit 21..22 - SLPM Value (if output)
- *	bit 23..25 - PDIS value (if input)
- *	bit	26 - Gpio mode
- *	bit	27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- *		     pull up/down = disabled
- *		     sleep mode = input/wakeup
- *		     direction = input
- *		     value = low
- *		     SLPM direction = same as normal
- *		     SLPM pull = same as normal
- *		     SLPM value = same as normal
- *
- * PIN_CFG	   - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK		0x1ff
-#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT		9
-#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT		11
-#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT		13
-#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT		14
-#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT		15
-#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT	16
-#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x)	\
-	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE	\
-	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP	\
-	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN	\
-	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT	19
-#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x)		\
-	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT	21
-#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x)		\
-	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT		23
-#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x)	\
-	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT	25
-#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT	26
-#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT	27
-#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
-#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT		(0)
-
-#define PIN_CFG(num, alt)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-#define GPIO_BLOCK_SHIFT 5
-#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-#define NMK_GPIO_LOWEMI	0x28
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-/* These appear in DB8540 and later ASICs */
-#define NMK_GPIO_EDGELEVEL 0x5C
-#define NMK_GPIO_LEVEL	0x60
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-	NMK_GPIO_PULL_NONE,
-	NMK_GPIO_PULL_UP,
-	NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-	NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_NOCHANGE,
-	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int num_gpio;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */