Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-05-07

Here are a few more Bluetooth patches for the 4.7 kernel:

 - NULL pointer fix in hci_intel driver
 - New Intel Bluetooth controller id in btusb driver
 - Added device tree binding documentation for Marvel's bt-sd8xxx
 - Platform specific wakeup interrupt support for btmrvl driver

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 180 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt
deleted file mode 100644
index 58f964b..0000000
--- a/Documentation/devicetree/bindings/btmrvl.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-btmrvl
-------
-
-Required properties:
-
-  - compatible : must be "btmrvl,cfgdata"
-
-Optional properties:
-
-  - btmrvl,cal-data : Calibration data downloaded to the device during
-		      initialization. This is an array of 28 values(u8).
-
-  - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
-		      configured.
-
-Example:
-
-GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
-in below example.
-
-btmrvl {
-	compatible = "btmrvl,cfgdata";
-
-	btmrvl,cal-data = /bits/ 8 <
-		0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
-		0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
-		0x00 0x00 0xf0 0x00>;
-	btmrvl,gpio-gap = <0x0d64>;
-};
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
new file mode 100644
index 0000000..14aa6cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
@@ -0,0 +1,56 @@
+Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices
+------
+
+Required properties:
+
+  - compatible : should be one of the following:
+	* "marvell,sd8897-bt"
+	* "marvell,sd8997-bt"
+
+Optional properties:
+
+  - marvell,cal-data: Calibration data downloaded to the device during
+		      initialization. This is an array of 28 values(u8).
+
+  - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
+		        firmware will use the pin to wakeup host system.
+  - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
+		      platform. The value will be configured to firmware. This
+		      is needed to work chip's sleep feature as expected.
+  - interrupt-parent: phandle of the parent interrupt controller
+  - interrupts : interrupt pin number to the cpu. Driver will request an irq based
+		 on this interrupt number. During system suspend, the irq will be
+		 enabled so that the bluetooth chip can wakeup host platform under
+		 certain condition. During system resume, the irq will be disabled
+		 to make sure unnecessary interrupt is not received.
+
+Example:
+
+IRQ pin 119 is used as system wakeup source interrupt.
+wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host
+using this device side pin and wakeup latency.
+calibration data is also available in below example.
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	btmrvl: bluetooth@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&pio>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+		marvell,cal-data = /bits/ 8 <
+			0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+			0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0xf0 0x00>;
+		marvell,wakeup-pin = <0x0d>;
+		marvell,wakeup-gap-ms = <0x64>;
+	};
+};
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 0590473..f742384 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,6 +23,17 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <net/bluetooth/bluetooth.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
 
 #define BTM_HEADER_LEN			4
 #define BTM_UPLD_SIZE			2312
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index f25a825..7ad8d61 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -510,34 +510,39 @@ static int btmrvl_download_cal_data(struct btmrvl_private *priv,
 static int btmrvl_check_device_tree(struct btmrvl_private *priv)
 {
 	struct device_node *dt_node;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
 	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
-	int ret;
-	u32 val;
+	int ret = 0;
+	u16 gpio, gap;
+
+	if (card->plt_of_node) {
+		dt_node = card->plt_of_node;
+		ret = of_property_read_u16(dt_node, "marvell,wakeup-pin",
+					   &gpio);
+		if (ret)
+			gpio = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+
+		ret = of_property_read_u16(dt_node, "marvell,wakeup-gap-ms",
+					   &gap);
+		if (ret)
+			gap = (u8)(priv->btmrvl_dev.gpio_gap & 0x00ff);
 
-	for_each_compatible_node(dt_node, NULL, "btmrvl,cfgdata") {
-		ret = of_property_read_u32(dt_node, "btmrvl,gpio-gap", &val);
-		if (!ret)
-			priv->btmrvl_dev.gpio_gap = val;
+		priv->btmrvl_dev.gpio_gap = (gpio << 8) + gap;
 
-		ret = of_property_read_u8_array(dt_node, "btmrvl,cal-data",
+		ret = of_property_read_u8_array(dt_node, "marvell,cal-data",
 						cal_data + BT_CAL_HDR_LEN,
 						BT_CAL_DATA_SIZE);
-		if (ret) {
-			of_node_put(dt_node);
+		if (ret)
 			return ret;
-		}
 
 		BT_DBG("Use cal data from device tree");
 		ret = btmrvl_download_cal_data(priv, cal_data,
 					       BT_CAL_DATA_SIZE);
-		if (ret) {
+		if (ret)
 			BT_ERR("Fail to download calibrate data");
-			of_node_put(dt_node);
-			return ret;
-		}
 	}
 
-	return 0;
+	return ret;
 }
 
 static int btmrvl_setup(struct hci_dev *hdev)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index c6ef248..f425ddf 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -52,6 +52,68 @@ static struct memory_type_mapping mem_type_mapping_tbl[] = {
 	{"EXTLAST", NULL, 0, 0xFE},
 };
 
+static const struct of_device_id btmrvl_sdio_of_match_table[] = {
+	{ .compatible = "marvell,sd8897-bt" },
+	{ .compatible = "marvell,sd8997-bt" },
+	{ }
+};
+
+static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv)
+{
+	struct btmrvl_plt_wake_cfg *cfg = priv;
+
+	if (cfg->irq_bt >= 0) {
+		pr_info("%s: wake by bt", __func__);
+		cfg->wake_by_bt = true;
+		disable_irq_nosync(irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* This function parses device tree node using mmc subnode devicetree API.
+ * The device node is saved in card->plt_of_node.
+ * If the device tree node exists and includes interrupts attributes, this
+ * function will request platform specific wakeup interrupt.
+ */
+static int btmrvl_sdio_probe_of(struct device *dev,
+				struct btmrvl_sdio_card *card)
+{
+	struct btmrvl_plt_wake_cfg *cfg;
+	int ret;
+
+	if (!dev->of_node ||
+	    !of_match_node(btmrvl_sdio_of_match_table, dev->of_node)) {
+		pr_err("sdio platform data not available");
+		return -1;
+	}
+
+	card->plt_of_node = dev->of_node;
+
+	card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card->plt_wake_cfg),
+					  GFP_KERNEL);
+	cfg = card->plt_wake_cfg;
+	if (cfg && card->plt_of_node) {
+		cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0);
+		if (!cfg->irq_bt) {
+			dev_err(dev, "fail to parse irq_bt from device tree");
+		} else {
+			ret = devm_request_irq(dev, cfg->irq_bt,
+					       btmrvl_wake_irq_bt,
+					       IRQF_TRIGGER_LOW,
+					       "bt_wake", cfg);
+			if (ret) {
+				dev_err(dev,
+					"Failed to request irq_bt %d (%d)\n",
+					cfg->irq_bt, ret);
+			}
+			disable_irq(cfg->irq_bt);
+		}
+	}
+
+	return 0;
+}
+
 /* The btmrvl_sdio_remove() callback function is called
  * when user removes this module from kernel space or ejects
  * the card from the slot. The driver handles these 2 cases
@@ -1464,6 +1526,9 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 
 	btmrvl_sdio_enable_host_int(card);
 
+	/* Device tree node parsing and platform specific configuration*/
+	btmrvl_sdio_probe_of(&func->dev, card);
+
 	priv = btmrvl_add_card(card);
 	if (!priv) {
 		BT_ERR("Initializing card failed!");
@@ -1544,6 +1609,13 @@ static int btmrvl_sdio_suspend(struct device *dev)
 		return 0;
 	}
 
+	/* Enable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+		card->plt_wake_cfg->wake_by_bt = false;
+		enable_irq(card->plt_wake_cfg->irq_bt);
+		enable_irq_wake(card->plt_wake_cfg->irq_bt);
+	}
+
 	priv = card->priv;
 	priv->adapter->is_suspending = true;
 	hcidev = priv->btmrvl_dev.hcidev;
@@ -1606,6 +1678,13 @@ static int btmrvl_sdio_resume(struct device *dev)
 	BT_DBG("%s: SDIO resume", hcidev->name);
 	hci_resume_dev(hcidev);
 
+	/* Disable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+		disable_irq_wake(card->plt_wake_cfg->irq_bt);
+		if (!card->plt_wake_cfg->wake_by_bt)
+			disable_irq(card->plt_wake_cfg->irq_bt);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 1a3bd06..3a522d2 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -62,6 +62,10 @@
 
 #define FIRMWARE_READY				0xfedc
 
+struct btmrvl_plt_wake_cfg {
+	int irq_bt;
+	bool wake_by_bt;
+};
 
 struct btmrvl_sdio_card_reg {
 	u8 cfg;
@@ -97,6 +101,8 @@ struct btmrvl_sdio_card {
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
 	struct btmrvl_private *priv;
+	struct device_node *plt_of_node;
+	struct btmrvl_plt_wake_cfg *plt_wake_cfg;
 };
 
 struct btmrvl_sdio_device {
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0d4e372..6aae959 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2001,12 +2001,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 		return -EINVAL;
 	}
 
-	/* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
-	 * supported by this firmware loading method. This check has been
-	 * put in place to ensure correct forward compatibility options
-	 * when newer hardware variants come along.
+	/* At the moment the iBT 3.0 hardware variants 0x0b (LnP/SfP)
+	 * and 0x0c (WsP) are supported by this firmware loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come along.
 	 */
-	if (ver.hw_variant != 0x0b) {
+	if (ver.hw_variant != 0x0b && ver.hw_variant != 0x0c) {
 		BT_ERR("%s: Unsupported Intel hardware variant (%u)",
 		       hdev->name, ver.hw_variant);
 		return -EINVAL;
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 91d6051..f6f2b01 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -1210,8 +1210,7 @@ static int intel_probe(struct platform_device *pdev)
 
 	idev->pdev = pdev;
 
-	idev->reset = devm_gpiod_get_optional(&pdev->dev, "reset",
-					      GPIOD_OUT_LOW);
+	idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(idev->reset)) {
 		dev_err(&pdev->dev, "Unable to retrieve gpio\n");
 		return PTR_ERR(idev->reset);
@@ -1223,8 +1222,7 @@ static int intel_probe(struct platform_device *pdev)
 
 		dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
 
-		host_wake = devm_gpiod_get_optional(&pdev->dev, "host-wake",
-						    GPIOD_IN);
+		host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
 		if (IS_ERR(host_wake)) {
 			dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
 			goto no_irq;