summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-01-15 12:34:35 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-01-15 12:34:35 -0800
commit793e039ea07191946b5ec136db00f8b03ee4a13e (patch)
tree8338b7d19af9a8f4d83b9bb509104ed06232b896
parentaa2797b30c322531981f24833b082446072d3c79 (diff)
parent97f9c5f211d1f063b1745370e6b4fd64d6adaeff (diff)
downloadop-kernel-dev-793e039ea07191946b5ec136db00f8b03ee4a13e.zip
op-kernel-dev-793e039ea07191946b5ec136db00f8b03ee4a13e.tar.gz
Merge tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 4.10-rc4 to resolve some reported issues. The "largest" here is a number of bugs being fixed in the ch341 usb-serial driver, to hopefully resolve the mess of different devices floating around that use this driver that have been having problems with the 4.10-rc1 release. There's also a tiny musb fix that I missed in the last pull request, as well as the traditional xhci fix rounding out the batch. All have been in linux-next with no reported issues" * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: fix deadlock at host remove by running watchdog correctly USB: serial: ch341: fix control-message error handling usb: musb: fix runtime PM in debugfs wusbcore: Fix one more crypto-on-the-stack bug USB: serial: kl5kusb105: fix line-state error handling USB: serial: ch341: fix baud rate and line-control handling USB: serial: ch341: fix line settings after reset-resume USB: serial: ch341: fix resume after reset USB: serial: ch341: fix open error handling USB: serial: ch341: fix modem-control and B0 handling USB: serial: ch341: fix open and resume after B0 USB: serial: ch341: fix initial modem-control state
-rw-r--r--drivers/usb/host/xhci-ring.c11
-rw-r--r--drivers/usb/host/xhci.c13
-rw-r--r--drivers/usb/musb/musb_debugfs.c20
-rw-r--r--drivers/usb/serial/ch341.c108
-rw-r--r--drivers/usb/serial/kl5kusb105.c9
-rw-r--r--drivers/usb/wusbcore/crypto.c3
6 files changed, 98 insertions, 66 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 25f522b..e32029a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -913,17 +913,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
spin_lock_irqsave(&xhci->lock, flags);
ep->stop_cmds_pending--;
- if (xhci->xhc_state & XHCI_STATE_REMOVING) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- return;
- }
- if (xhci->xhc_state & XHCI_STATE_DYING) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Stop EP timer ran, but another timer marked "
- "xHCI as DYING, exiting.");
- spin_unlock_irqrestore(&xhci->lock, flags);
- return;
- }
if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Stop EP timer ran, but no command pending, "
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0c8deb9..9a0ec11 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1534,19 +1534,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
xhci_urb_free_priv(urb_priv);
return ret;
}
- if ((xhci->xhc_state & XHCI_STATE_DYING) ||
- (xhci->xhc_state & XHCI_STATE_HALTED)) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Ep 0x%x: URB %p to be canceled on "
- "non-responsive xHCI host.",
- urb->ep->desc.bEndpointAddress, urb);
- /* Let the stop endpoint command watchdog timer (which set this
- * state) finish cleaning up the endpoint TD lists. We must
- * have caught it in the middle of dropping a lock and giving
- * back an URB.
- */
- goto done;
- }
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4fef50e..dd70c88 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -114,6 +114,7 @@ static int musb_regdump_show(struct seq_file *s, void *unused)
unsigned i;
seq_printf(s, "MUSB (M)HDRC Register Dump\n");
+ pm_runtime_get_sync(musb->controller);
for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
switch (musb_regmap[i].size) {
@@ -132,6 +133,8 @@ static int musb_regdump_show(struct seq_file *s, void *unused)
}
}
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return 0;
}
@@ -145,7 +148,10 @@ static int musb_test_mode_show(struct seq_file *s, void *unused)
struct musb *musb = s->private;
unsigned test;
+ pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
if (test & MUSB_TEST_FORCE_HOST)
seq_printf(s, "force host\n");
@@ -194,11 +200,12 @@ static ssize_t musb_test_mode_write(struct file *file,
u8 test;
char buf[18];
+ pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
if (test) {
dev_err(musb->controller, "Error: test mode is already set. "
"Please do USB Bus Reset to start a new test.\n");
- return count;
+ goto ret;
}
memset(buf, 0x00, sizeof(buf));
@@ -234,6 +241,9 @@ static ssize_t musb_test_mode_write(struct file *file,
musb_writeb(musb->mregs, MUSB_TESTMODE, test);
+ret:
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return count;
}
@@ -254,8 +264,13 @@ static int musb_softconnect_show(struct seq_file *s, void *unused)
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_WAIT_BCON:
+ pm_runtime_get_sync(musb->controller);
+
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0;
+
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
break;
default:
connect = -1;
@@ -284,6 +299,7 @@ static ssize_t musb_softconnect_write(struct file *file,
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
+ pm_runtime_get_sync(musb->controller);
if (!strncmp(buf, "0", 1)) {
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
@@ -314,6 +330,8 @@ static ssize_t musb_softconnect_write(struct file *file,
}
}
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return count;
}
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2597b83..95aa523 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -95,6 +95,7 @@ struct ch341_private {
unsigned baud_rate; /* set baud rate */
u8 line_control; /* set line control value RTS/DTR */
u8 line_status; /* active status of modem control inputs */
+ u8 lcr;
};
static void ch341_set_termios(struct tty_struct *tty,
@@ -112,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
value, index, NULL, 0, DEFAULT_TIMEOUT);
+ if (r < 0)
+ dev_err(&dev->dev, "failed to send control message: %d\n", r);
return r;
}
@@ -129,11 +132,24 @@ static int ch341_control_in(struct usb_device *dev,
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
value, index, buf, bufsize, DEFAULT_TIMEOUT);
- return r;
+ if (r < bufsize) {
+ if (r >= 0) {
+ dev_err(&dev->dev,
+ "short control message received (%d < %u)\n",
+ r, bufsize);
+ r = -EIO;
+ }
+
+ dev_err(&dev->dev, "failed to receive control message: %d\n",
+ r);
+ return r;
+ }
+
+ return 0;
}
-static int ch341_init_set_baudrate(struct usb_device *dev,
- struct ch341_private *priv, unsigned ctrl)
+static int ch341_set_baudrate_lcr(struct usb_device *dev,
+ struct ch341_private *priv, u8 lcr)
{
short a;
int r;
@@ -156,9 +172,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev,
factor = 0x10000 - factor;
a = (factor & 0xff00) | divisor;
- /* 0x9c is "enable SFR_UART Control register and timer" */
- r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT,
- 0x9c | (ctrl << 8), a | 0x80);
+ /*
+ * CH341A buffers data until a full endpoint-size packet (32 bytes)
+ * has been received unless bit 7 is set.
+ */
+ a |= BIT(7);
+
+ r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a);
+ if (r)
+ return r;
+
+ r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr);
+ if (r)
+ return r;
return r;
}
@@ -170,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control)
static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
{
+ const unsigned int size = 2;
char *buffer;
int r;
- const unsigned size = 8;
unsigned long flags;
buffer = kmalloc(size, GFP_KERNEL);
@@ -183,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- /* setup the private status if available */
- if (r == 2) {
- r = 0;
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
- spin_unlock_irqrestore(&priv->lock, flags);
- } else
- r = -EPROTO;
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+ spin_unlock_irqrestore(&priv->lock, flags);
out: kfree(buffer);
return r;
@@ -200,9 +221,9 @@ out: kfree(buffer);
static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
{
+ const unsigned int size = 2;
char *buffer;
int r;
- const unsigned size = 8;
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer)
@@ -232,7 +253,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- r = ch341_init_set_baudrate(dev, priv, 0);
+ r = ch341_set_baudrate_lcr(dev, priv, priv->lcr);
if (r < 0)
goto out;
@@ -258,7 +279,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
spin_lock_init(&priv->lock);
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(port->serial->dev, priv);
if (r < 0)
@@ -320,7 +340,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
r = ch341_configure(serial->dev, priv);
if (r)
- goto out;
+ return r;
if (tty)
ch341_set_termios(tty, port, NULL);
@@ -330,12 +350,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
if (r) {
dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
__func__, r);
- goto out;
+ return r;
}
r = usb_serial_generic_open(tty, port);
+ if (r)
+ goto err_kill_interrupt_urb;
+
+ return 0;
+
+err_kill_interrupt_urb:
+ usb_kill_urb(port->interrupt_in_urb);
-out: return r;
+ return r;
}
/* Old_termios contains the original termios settings and
@@ -356,7 +383,6 @@ static void ch341_set_termios(struct tty_struct *tty,
baud_rate = tty_get_baud_rate(tty);
- priv->baud_rate = baud_rate;
ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
switch (C_CSIZE(tty)) {
@@ -386,22 +412,25 @@ static void ch341_set_termios(struct tty_struct *tty,
ctrl |= CH341_LCR_STOP_BITS_2;
if (baud_rate) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
- r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
+ priv->baud_rate = baud_rate;
+
+ r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl);
if (r < 0 && old_termios) {
priv->baud_rate = tty_termios_baud_rate(old_termios);
tty_termios_copy_hw(&tty->termios, old_termios);
+ } else if (r == 0) {
+ priv->lcr = ctrl;
}
- } else {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
}
- ch341_set_handshake(port->serial->dev, priv->line_control);
+ spin_lock_irqsave(&priv->lock, flags);
+ if (C_BAUD(tty) == B0)
+ priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
}
static void ch341_break_ctl(struct tty_struct *tty, int break_state)
@@ -576,14 +605,23 @@ static int ch341_tiocmget(struct tty_struct *tty)
static int ch341_reset_resume(struct usb_serial *serial)
{
- struct ch341_private *priv;
-
- priv = usb_get_serial_port_data(serial->port[0]);
+ struct usb_serial_port *port = serial->port[0];
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ int ret;
/* reconfigure ch341 serial port after bus-reset */
ch341_configure(serial->dev, priv);
- return 0;
+ if (tty_port_initialized(&port->port)) {
+ ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ if (ret) {
+ dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return usb_serial_generic_resume(serial);
}
static struct usb_serial_driver ch341_device = {
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0ee190f..6cb4575 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
status_buf, KLSI_STATUSBUF_LEN,
10000
);
- if (rc < 0)
- dev_err(&port->dev, "Reading line status failed (error = %d)\n",
- rc);
- else {
+ if (rc != KLSI_STATUSBUF_LEN) {
+ dev_err(&port->dev, "reading line status failed: %d\n", rc);
+ if (rc >= 0)
+ rc = -EIO;
+ } else {
status = get_unaligned_le16(status_buf);
dev_info(&port->serial->dev->dev, "read status %x %x\n",
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 79451f7..062c205 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -216,7 +216,6 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
struct scatterlist sg[4], sg_dst;
void *dst_buf;
size_t dst_size;
- const u8 bzero[16] = { 0 };
u8 iv[crypto_skcipher_ivsize(tfm_cbc)];
size_t zero_padding;
@@ -261,7 +260,7 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1));
sg_set_buf(&sg[2], b, blen);
/* 0 if well behaved :) */
- sg_set_buf(&sg[3], bzero, zero_padding);
+ sg_set_page(&sg[3], ZERO_PAGE(0), zero_padding, 0);
sg_init_one(&sg_dst, dst_buf, dst_size);
skcipher_request_set_tfm(req, tfm_cbc);
OpenPOWER on IntegriCloud