Merge tag 'usb-for-v3.12-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.12 merge window (part 2)

Here's a set of important fixes for v3.12 merge
window which have been pending in the mailing list
for quite some time.

We have use-after-free fixes, signedness fixes,
more of HAS_DMA dependencies, fixes for NULL pointer
deferences, build fixes and some other fixes to
the musb driver caused by recent patches.

Patches are quite small and contain valuable fixes
which will give us a much better -rc1 release.

Please consider merging

Signed-of-by: Felipe Balbi <balbi@ti.com>

21 files changed, 329 insertions, 126 deletions

diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index dc9dc8c..20c2ff2 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -1,35 +1,197 @@
-AM33XX MUSB GLUE
- - compatible : Should be "ti,musb-am33xx"
- - reg : offset and length of register sets, first usbss, then for musb instances
- - interrupts : usbss, musb instance interrupts in order
- - ti,hwmods : must be "usb_otg_hs"
- - multipoint : Should be "1" indicating the musb controller supports
-   multipoint. This is a MUSB configuration-specific setting.
- - num-eps : Specifies the number of endpoints. This is also a
-   MUSB configuration-specific setting. Should be set to "16"
- - ram-bits : Specifies the ram address size. Should be set to "12"
- - port0-mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
-   represents PERIPHERAL.
- - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
-   represents PERIPHERAL.
- - power : Should be "250". This signifies the controller can supply up to
-   500mA when operating in host mode.
+  AM33xx MUSB
+~~~~~~~~~~~~~~~
+- compatible: ti,am33xx-usb
+- reg: offset and length of the usbss register sets
+- ti,hwmods : must be "usb_otg_hs"
+
+The glue layer contains multiple child nodes. It is required the have
+at least a control module node, USB node and a PHY node. The second USB
+node and its PHY node is optional. The DMA node is also optional.
+
+Reset module
+~~~~~~~~~~~~
+- compatible: ti,am335x-usb-ctrl-module
+- reg: offset and length of the "USB control registers" in the "Control
+  Module" block. A second offset and length for the USB wake up control
+  in the same memory block.
+- reg-names: "phy_ctrl" for the "USB control registers" and "wakeup" for
+  the USB wake up control register.
+
+USB PHY
+~~~~~~~
+compatible: ti,am335x-usb-phy
+reg: offset and length of the "USB PHY" register space
+ti,ctrl_mod: reference to the "reset module" node
+reg-names: phy
+The PHY should have a "phy" alias numbered properly in the alias
+node.
+
+USB
+~~~
+- compatible: ti,musb-am33xx
+- reg: offset and length of "USB Controller Registers", and offset and
+  length of "USB Core" register space.
+- reg-names: control for the ""USB Controller Registers" and "mc" for
+  "USB Core" register space
+- interrupts: USB interrupt number
+- interrupt-names: mc
+- dr_mode: Should be one of "host", "peripheral" or "otg".
+- mentor,multipoint: Should be "1" indicating the musb controller supports
+  multipoint. This is a MUSB configuration-specific setting.
+- mentor,num-eps: Specifies the number of endpoints. This is also a
+  MUSB configuration-specific setting. Should be set to "16"
+- mentor,ram-bits: Specifies the ram address size. Should be set to "12"
+- mentor,power: Should be "500". This signifies the controller can supply up to
+  500mA when operating in host mode.
+- phys: reference to the USB phy
+- dmas: specifies the dma channels
+- dma-names: specifies the names of the channels. Use "rxN" for receive
+  and "txN" for transmit endpoints. N specifies the endpoint number.
+
+The controller should have an "usb" alias numbered properly in the alias
+node.
+
+DMA
+~~~
+- compatible: ti,am3359-cppi41
+- reg: offset and length of the following register spaces: USBSS, USB
+  CPPI DMA Controller, USB CPPI DMA Scheduler, USB Queue Manager
+- reg-names: glue, controller, scheduler, queuemgr
+- #dma-cells: should be set to 2. The first number represents the
+  endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29
+  for endpoints 1 … 15 on instance 1). The second number is 0 for RX and
+  1 for TX transfers.
+- #dma-channels: should be set to 30 representing the 15 endpoints for
+  each USB instance.
 
 Example:
+~~~~~~~~
+The following example contains all the nodes as used on am335x-evm:
+
+aliases {
+	usb0 = &usb0;
+	usb1 = &usb1;
+	phy0 = &usb0_phy;
+	phy1 = &usb1_phy;
+};
 
-usb@47400000  {
-	compatible = "ti,musb-am33xx";
-	reg = <0x47400000 0x1000	/* usbss */
-	       0x47401000 0x800		/* musb instance 0 */
-	       0x47401800 0x800>;	/* musb instance 1 */
-	interrupts = <17		/* usbss */
-		      18		/* musb instance 0 */
-		      19>;		/* musb instance 1 */
-	multipoint = <1>;
-	num-eps = <16>;
-	ram-bits = <12>;
-	port0-mode = <3>;
-	port1-mode = <3>;
-	power = <250>;
+usb: usb@47400000 {
+	compatible = "ti,am33xx-usb";
+	reg = <0x47400000 0x1000>;
+	ranges;
+	#address-cells = <1>;
+	#size-cells = <1>;
 	ti,hwmods = "usb_otg_hs";
+
+	ctrl_mod: control@44e10000 {
+		compatible = "ti,am335x-usb-ctrl-module";
+		reg = <0x44e10620 0x10
+			0x44e10648 0x4>;
+		reg-names = "phy_ctrl", "wakeup";
+	};
+
+	usb0_phy: usb-phy@47401300 {
+		compatible = "ti,am335x-usb-phy";
+		reg = <0x47401300 0x100>;
+		reg-names = "phy";
+		ti,ctrl_mod = <&ctrl_mod>;
+	};
+
+	usb0: usb@47401000 {
+		compatible = "ti,musb-am33xx";
+		reg = <0x47401400 0x400
+			0x47401000 0x200>;
+		reg-names = "mc", "control";
+
+		interrupts = <18>;
+		interrupt-names = "mc";
+		dr_mode = "otg"
+		mentor,multipoint = <1>;
+		mentor,num-eps = <16>;
+		mentor,ram-bits = <12>;
+		mentor,power = <500>;
+		phys = <&usb0_phy>;
+
+		dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+			&cppi41dma  2 0 &cppi41dma  3 0
+			&cppi41dma  4 0 &cppi41dma  5 0
+			&cppi41dma  6 0 &cppi41dma  7 0
+			&cppi41dma  8 0 &cppi41dma  9 0
+			&cppi41dma 10 0 &cppi41dma 11 0
+			&cppi41dma 12 0 &cppi41dma 13 0
+			&cppi41dma 14 0 &cppi41dma  0 1
+			&cppi41dma  1 1 &cppi41dma  2 1
+			&cppi41dma  3 1 &cppi41dma  4 1
+			&cppi41dma  5 1 &cppi41dma  6 1
+			&cppi41dma  7 1 &cppi41dma  8 1
+			&cppi41dma  9 1 &cppi41dma 10 1
+			&cppi41dma 11 1 &cppi41dma 12 1
+			&cppi41dma 13 1 &cppi41dma 14 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+			"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+			"rx14", "rx15",
+			"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+			"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+			"tx14", "tx15";
+	};
+
+	usb1_phy: usb-phy@47401b00 {
+		compatible = "ti,am335x-usb-phy";
+		reg = <0x47401b00 0x100>;
+		reg-names = "phy";
+		ti,ctrl_mod = <&ctrl_mod>;
+	};
+
+	usb1: usb@47401800 {
+		compatible = "ti,musb-am33xx";
+		reg = <0x47401c00 0x400
+			0x47401800 0x200>;
+		reg-names = "mc", "control";
+		interrupts = <19>;
+		interrupt-names = "mc";
+		dr_mode = "host"
+		mentor,multipoint = <1>;
+		mentor,num-eps = <16>;
+		mentor,ram-bits = <12>;
+		mentor,power = <500>;
+		phys = <&usb1_phy>;
+
+		dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+			&cppi41dma 17 0 &cppi41dma 18 0
+			&cppi41dma 19 0 &cppi41dma 20 0
+			&cppi41dma 21 0 &cppi41dma 22 0
+			&cppi41dma 23 0 &cppi41dma 24 0
+			&cppi41dma 25 0 &cppi41dma 26 0
+			&cppi41dma 27 0 &cppi41dma 28 0
+			&cppi41dma 29 0 &cppi41dma 15 1
+			&cppi41dma 16 1 &cppi41dma 17 1
+			&cppi41dma 18 1 &cppi41dma 19 1
+			&cppi41dma 20 1 &cppi41dma 21 1
+			&cppi41dma 22 1 &cppi41dma 23 1
+			&cppi41dma 24 1 &cppi41dma 25 1
+			&cppi41dma 26 1 &cppi41dma 27 1
+			&cppi41dma 28 1 &cppi41dma 29 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+			"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+			"rx14", "rx15",
+			"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+			"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+			"tx14", "tx15";
+	};
+
+	cppi41dma: dma-controller@07402000 {
+		compatible = "ti,am3359-cppi41";
+		reg =  <0x47400000 0x1000
+			0x47402000 0x1000
+			0x47403000 0x1000
+			0x47404000 0x4000>;
+		reg-names = "glue", "controller", "scheduler", "queuemgr";
+		interrupts = <17>;
+		interrupt-names = "glue";
+		#dma-cells = <2>;
+		#dma-channels = <30>;
+		#dma-requests = <256>;
+	};
 };
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a8907b5..d318987d 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -127,13 +127,26 @@
 				status = "okay";
 			};
 
-			phy@47401300 {
+			usb-phy@47401300 {
+				status = "okay";
+			};
+
+			usb-phy@47401b00 {
 				status = "okay";
 			};
 
 			usb@47401000 {
 				status = "okay";
 			};
+
+			usb@47401800 {
+				status = "okay";
+				dr_mode = "host";
+			};
+
+			dma-controller@07402000  {
+				status = "okay";
+			};
 		};
 
 		i2c0: i2c@44e0b000 {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index c26c16c..e8ec875 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -178,11 +178,11 @@
 				status = "okay";
 			};
 
-			phy@47401300 {
+			usb-phy@47401300 {
 				status = "okay";
 			};
 
-			phy@47401b00 {
+			usb-phy@47401b00 {
 				status = "okay";
 			};
 
@@ -192,9 +192,10 @@
 
 			usb@47401800 {
 				status = "okay";
+				dr_mode = "host";
 			};
 
-			dma@07402000  {
+			dma-controller@07402000  {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index e92446c..a6c5033 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -214,7 +214,7 @@
 				status = "okay";
 			};
 
-			phy@47401300 {
+			usb-phy@47401300 {
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 24d6309..f9c5da9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -354,7 +354,7 @@
 				status = "disabled";
 			};
 
-			usb0_phy: phy@47401300 {
+			usb0_phy: usb-phy@47401300 {
 				compatible = "ti,am335x-usb-phy";
 				reg = <0x47401300 0x100>;
 				reg-names = "phy";
@@ -364,25 +364,19 @@
 
 			usb0: usb@47401000 {
 				compatible = "ti,musb-am33xx";
-				ranges;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x47401000 0x200>;
-				reg-names = "control";
 				status = "disabled";
-
-				musb0: usb@47401400 {
-					compatible = "mg,musbmhdrc";
-					reg = <0x47401400 0x400>;
-					reg-names = "mc";
-					interrupts = <18>;
-					interrupt-names = "mc";
-					multipoint = <1>;
-					num-eps = <16>;
-					ram-bits = <12>;
-					port-mode = <3>;
-					power = <250>;
-					phys = <&usb0_phy>;
+				reg = <0x47401400 0x400
+					0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
 
 				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 					&cppi41dma  2 0 &cppi41dma  3 0
@@ -406,10 +400,9 @@
 					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 					"tx14", "tx15";
-				};
 			};
 
-			usb1_phy: phy@47401b00 {
+			usb1_phy: usb-phy@47401b00 {
 				compatible = "ti,am335x-usb-phy";
 				reg = <0x47401b00 0x100>;
 				reg-names = "phy";
@@ -419,25 +412,18 @@
 
 			usb1: usb@47401800 {
 				compatible = "ti,musb-am33xx";
-				ranges;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x47401800 0x200>;
-				reg-names = "control";
 				status = "disabled";
-
-				musb1: usb@47401c00 {
-					compatible = "mg,musbmhdrc";
-					reg = <0x47401c00 0x400>;
-					reg-names = "mc";
-					interrupts = <19>;
-					interrupt-names = "mc";
-					multipoint = <1>;
-					num-eps = <16>;
-					ram-bits = <12>;
-					port-mode = <3>;
-					power = <250>;
-					phys = <&usb1_phy>;
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
 
 				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 					&cppi41dma 17 0 &cppi41dma 18 0
@@ -461,16 +447,15 @@
 					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 					"tx14", "tx15";
-				};
 			};
 
-			cppi41dma: dma@07402000 {
+			cppi41dma: dma-controller@07402000 {
 				compatible = "ti,am3359-cppi41";
 				reg =  <0x47400000 0x1000
 					0x47402000 0x1000
 					0x47403000 0x1000
 					0x47404000 0x4000>;
-				reg-names = "glue controller scheduler queuemgr";
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index 5dcebca..6c4e64f 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -9,6 +9,7 @@
 #include <linux/dmapool.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
+#include <linux/pm_runtime.h>
 #include "dmaengine.h"
 
 #define DESC_TYPE	27
@@ -579,7 +580,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
 				WARN_ON(!c->is_tx && !(pd0 & TD_DESC_IS_RX));
 				WARN_ON((pd0 & 0x1f) != c->port_num);
 			} else {
-				__WARN();
+				WARN_ON_ONCE(1);
 			}
 			c->td_seen = 1;
 		}
@@ -960,6 +961,11 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 		goto err_remap;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret)
+		goto err_get_sync;
+
 	cdd->queues_rx = glue_info->queues_rx;
 	cdd->queues_tx = glue_info->queues_tx;
 	cdd->td_queue = glue_info->td_queue;
@@ -1005,6 +1011,9 @@ err_irq:
 err_chans:
 	deinit_cpii41(pdev, cdd);
 err_init_cppi:
+	pm_runtime_put(&pdev->dev);
+err_get_sync:
+	pm_runtime_disable(&pdev->dev);
 	iounmap(cdd->usbss_mem);
 	iounmap(cdd->ctrl_mem);
 	iounmap(cdd->sched_mem);
@@ -1029,6 +1038,8 @@ static int cppi41_dma_remove(struct platform_device *pdev)
 	iounmap(cdd->ctrl_mem);
 	iounmap(cdd->sched_mem);
 	iounmap(cdd->qmgr_mem);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	kfree(cdd);
 	return 0;
 }
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 577af1b..474162e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -33,7 +33,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 
-#include <linux/usb/otg.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/of.h>
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bddd7ed..30e2dd8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -187,7 +187,7 @@ config USB_FSL_USB2
 
 config USB_FUSB300
 	tristate "Faraday FUSB300 USB Peripheral Controller"
-	depends on !PHYS_ADDR_T_64BIT
+	depends on !PHYS_ADDR_T_64BIT && HAS_DMA
 	help
 	   Faraday usb device controller FUSB300 driver
 
@@ -244,6 +244,7 @@ config USB_PXA25X_SMALL
 
 config USB_R8A66597
 	tristate "Renesas R8A66597 USB Peripheral Controller"
+	depends on HAS_DMA
 	help
 	   R8A66597 is a discrete USB host and peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -385,7 +386,7 @@ config USB_NET2272
 
 config USB_NET2272_DMA
 	boolean "Support external DMA controller"
-	depends on USB_NET2272
+	depends on USB_NET2272 && HAS_DMA
 	help
 	  The NET2272 part can optionally support an external DMA
 	  controller, but your board has to have support in the
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 40d2338..2cb52e0 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1772,7 +1772,7 @@ out:
 static int atmel_usba_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver)
 {
-	int ret = 0;
+	int ret;
 	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
 	unsigned long flags;
 
@@ -1784,11 +1784,11 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 
 	ret = clk_prepare_enable(udc->pclk);
 	if (ret)
-		goto out;
+		return ret;
 	ret = clk_prepare_enable(udc->hclk);
 	if (ret) {
 		clk_disable_unprepare(udc->pclk);
-		goto out;
+		return ret;
 	}
 
 	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
@@ -1804,11 +1804,9 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
 		usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
 	}
-
-out:
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	return ret;
+	return 0;
 }
 
 static int atmel_usba_stop(struct usb_gadget *gadget,
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 80e7f75..8f0d614 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -859,8 +859,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
 		list_for_each_entry_safe(f, tmp, &cfg->func_list, list) {
 			list_del(&f->list);
 			ret = usb_add_function(c, f);
-			if (ret)
+			if (ret) {
+				list_add(&f->list, &cfg->func_list);
 				goto err_purge_funcs;
+			}
 		}
 		usb_ep_autoconfig_reset(cdev->gadget);
 	}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index f394f29..1a66c5b 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1417,8 +1417,8 @@ static void functionfs_unbind(struct ffs_data *ffs)
 		usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req);
 		ffs->ep0req = NULL;
 		ffs->gadget = NULL;
-		ffs_data_put(ffs);
 		clear_bit(FFS_FL_BOUND, &ffs->flags);
+		ffs_data_put(ffs);
 	}
 }
 
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 570c005..465ef8e 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1270,10 +1270,6 @@ dev_release (struct inode *inode, struct file *fd)
 	dev->buf = NULL;
 	put_dev (dev);
 
-	/* other endpoints were all decoupled from this device */
-	spin_lock_irq(&dev->lock);
-	dev->state = STATE_DEV_DISABLED;
-	spin_unlock_irq(&dev->lock);
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index e64701d..ae95974 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -150,8 +150,10 @@ static void cppi41_dma_callback(void *private_data)
 				remain_bytes,
 				direction,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		if (WARN_ON(!dma_desc))
+		if (WARN_ON(!dma_desc)) {
+			spin_unlock_irqrestore(&musb->lock, flags);
 			return;
+		}
 
 		dma_desc->callback = cppi41_dma_callback;
 		dma_desc->callback_param = channel;
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 4ffbaac..4047cbb 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -44,6 +44,7 @@
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/usb/of.h>
 
 #include "musb_core.h"
 
@@ -230,6 +231,8 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
 		glue->last_timer = jiffies;
 		return;
 	}
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return;
 
 	if (time_after(glue->last_timer, timeout) &&
 				timer_pending(&glue->timer)) {
@@ -313,7 +316,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 					jiffies + wrp->poll_seconds * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
-			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
 			musb->xceiv->otg->default_a = 1;
 			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -361,8 +363,8 @@ static int dsps_musb_init(struct musb *musb)
 		return -EINVAL;
 
 	reg_base = devm_ioremap_resource(dev, r);
-	if (!musb->ctrl_base)
-		return -EINVAL;
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
 	musb->ctrl_base = reg_base;
 
 	/* NOP driver needs change if supporting dual instance */
@@ -425,35 +427,51 @@ static int get_int_prop(struct device_node *dn, const char *s)
 	return val;
 }
 
+static int get_musb_port_mode(struct device *dev)
+{
+	enum usb_dr_mode mode;
+
+	mode = of_usb_get_dr_mode(dev->of_node);
+	switch (mode) {
+	case USB_DR_MODE_HOST:
+		return MUSB_PORT_MODE_HOST;
+
+	case USB_DR_MODE_PERIPHERAL:
+		return MUSB_PORT_MODE_GADGET;
+
+	case USB_DR_MODE_UNKNOWN:
+	case USB_DR_MODE_OTG:
+	default:
+		return MUSB_PORT_MODE_DUAL_ROLE;
+	};
+}
+
 static int dsps_create_musb_pdev(struct dsps_glue *glue,
 		struct platform_device *parent)
 {
 	struct musb_hdrc_platform_data pdata;
 	struct resource	resources[2];
+	struct resource	*res;
 	struct device *dev = &parent->dev;
 	struct musb_hdrc_config	*config;
 	struct platform_device *musb;
 	struct device_node *dn = parent->dev.of_node;
-	struct device_node *child_node;
 	int ret;
 
-	child_node = of_get_child_by_name(dn, "usb");
-	if (!child_node)
-		return -EINVAL;
-
 	memset(resources, 0, sizeof(resources));
-	ret = of_address_to_resource(child_node, 0, &resources[0]);
-	if (ret) {
+	res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
+	if (!res) {
 		dev_err(dev, "failed to get memory.\n");
-		return ret;
+		return -EINVAL;
 	}
+	resources[0] = *res;
 
-	ret = of_irq_to_resource(child_node, 0, &resources[1]);
-	if (ret == 0) {
+	res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc");
+	if (!res) {
 		dev_err(dev, "failed to get irq.\n");
-		ret = -EINVAL;
-		return ret;
+		return -EINVAL;
 	}
+	resources[1] = *res;
 
 	/* allocate the child platform device */
 	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
@@ -465,7 +483,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	musb->dev.parent		= dev;
 	musb->dev.dma_mask		= &musb_dmamask;
 	musb->dev.coherent_dma_mask	= musb_dmamask;
-	musb->dev.of_node		= of_node_get(child_node);
+	musb->dev.of_node		= of_node_get(dn);
 
 	glue->musb = musb;
 
@@ -485,11 +503,12 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	pdata.config = config;
 	pdata.platform_ops = &dsps_ops;
 
-	config->num_eps = get_int_prop(child_node, "num-eps");
-	config->ram_bits = get_int_prop(child_node, "ram-bits");
-	pdata.mode = get_int_prop(child_node, "port-mode");
-	pdata.power = get_int_prop(child_node, "power");
-	config->multipoint = of_property_read_bool(child_node, "multipoint");
+	config->num_eps = get_int_prop(dn, "mentor,num-eps");
+	config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
+	pdata.mode = get_musb_port_mode(dev);
+	/* DT keeps this entry in mA, musb expects it as per USB spec */
+	pdata.power = get_int_prop(dn, "mentor,power") / 2;
+	config->multipoint = of_property_read_bool(dn, "mentor,multipoint");
 
 	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
 	if (ret) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4376f51..9a08679 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -76,13 +76,21 @@ static inline void map_dma_buffer(struct musb_request *request,
 		return;
 
 	if (request->request.dma == DMA_ADDR_INVALID) {
-		request->request.dma = dma_map_single(
+		dma_addr_t dma_addr;
+		int ret;
+
+		dma_addr = dma_map_single(
 				musb->controller,
 				request->request.buf,
 				request->request.length,
 				request->tx
 					? DMA_TO_DEVICE
 					: DMA_FROM_DEVICE);
+		ret = dma_mapping_error(musb->controller, dma_addr);
+		if (ret)
+			return;
+
+		request->request.dma = dma_addr;
 		request->map_state = MUSB_MAPPED;
 	} else {
 		dma_sync_single_for_device(musb->controller,
@@ -1804,6 +1812,8 @@ err:
 
 void musb_gadget_cleanup(struct musb *musb)
 {
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return;
 	usb_del_gadget_udc(&musb->g);
 }
 
@@ -1929,7 +1939,8 @@ static int musb_gadget_stop(struct usb_gadget *g,
 	stop_activity(musb, driver);
 	otg_set_peripheral(musb->xceiv->otg, NULL);
 
-	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
+	dev_dbg(musb->controller, "unregistering driver %s\n",
+				  driver ? driver->function : "(removed)");
 
 	musb->is_active = 0;
 	musb->gadget_driver = NULL;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index a9695f5..9a2b8c8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2628,6 +2628,8 @@ int musb_host_alloc(struct musb *musb)
 
 void musb_host_cleanup(struct musb *musb)
 {
+	if (musb->port_mode == MUSB_PORT_MODE_GADGET)
+		return;
 	usb_remove_hcd(musb->hcd);
 	musb->hcd = NULL;
 }
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index e51dd9b..3700e97 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -333,7 +333,9 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
 			if (!ux500_channel->dma_chan)
 				ux500_channel->dma_chan =
 					dma_request_channel(mask,
-							    data->dma_filter,
+							    data ?
+							    data->dma_filter :
+							    NULL,
 							    param_array[ch_num]);
 
 			if (!ux500_channel->dma_chan) {
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 7597545..22cf07d 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -42,8 +42,8 @@ static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
 		reg = AM335X_USB1_CTRL;
 		break;
 	default:
-		__WARN();
-		 return;
+		WARN_ON(1);
+		return;
 	}
 
 	val = readl(usb_ctrl->phy_reg + reg);
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index ca26628..e1859b8 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -15,7 +15,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include "otg_fsm.h"
+#include "phy-fsm-usb.h"
 #include <linux/usb/otg.h>
 #include <linux/ioctl.h>
 
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
index c520b35..7f45966 100644
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -29,7 +29,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
-#include "phy-otg-fsm.h"
+#include "phy-fsm-usb.h"
 
 /* Change USB protocol when there is a protocol change */
 static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
diff --git a/drivers/usb/phy/phy-omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c
index 844ab68..d266861 100644
--- a/drivers/usb/phy/phy-omap-usb2.c
+++ b/drivers/usb/phy/phy-omap-usb2.c
@@ -98,8 +98,8 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
 
 static int omap_usb2_suspend(struct usb_phy *x, int suspend)
 {
-	u32 ret;
 	struct omap_usb *phy = phy_to_omapusb(x);
+	int ret;
 
 	if (suspend && !phy->is_suspended) {
 		omap_control_usb_phy_power(phy->control_dev, 0);
@@ -108,8 +108,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend)
 	} else if (!suspend && phy->is_suspended) {
 		ret = pm_runtime_get_sync(phy->dev);
 		if (ret < 0) {
-			dev_err(phy->dev, "get_sync failed with err %d\n",
-									ret);
+			dev_err(phy->dev, "get_sync failed with err %d\n", ret);
 			return ret;
 		}
 		omap_control_usb_phy_power(phy->control_dev, 1);
@@ -209,9 +208,9 @@ static int omap_usb2_runtime_suspend(struct device *dev)
 
 static int omap_usb2_runtime_resume(struct device *dev)
 {
-	u32 ret = 0;
 	struct platform_device	*pdev = to_platform_device(dev);
 	struct omap_usb	*phy = platform_get_drvdata(pdev);
+	int ret;
 
 	ret = clk_enable(phy->wkupclk);
 	if (ret < 0) {