summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 16:51:10 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 16:51:10 -0800
commit752451f01c4567b506bf4343082682dbb8fb30dd (patch)
treeec2ec2989c93e567952ddc1ec879013aa2704f0a
parent673ab8783b596cda5b616b317b1a1b47480c66fd (diff)
parent972deb4f49b5b6703d9c6117ba0aeda2180d4447 (diff)
downloadop-kernel-dev-752451f01c4567b506bf4343082682dbb8fb30dd.zip
op-kernel-dev-752451f01c4567b506bf4343082682dbb8fb30dd.tar.gz
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt27
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt81
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-ocores.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt20
-rw-r--r--arch/arm/boot/dts/imx28-cfa10049.dts24
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c42
-rw-r--r--arch/arm/mach-omap2/i2c.c19
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c12
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c3
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-at91.c338
-rw-r--r--drivers/i2c/busses/i2c-cbus-gpio.c300
-rw-r--r--drivers/i2c/busses/i2c-gpio.c6
-rw-r--r--drivers/i2c/busses/i2c-mxs.c2
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c14
-rw-r--r--drivers/i2c/busses/i2c-ocores.c164
-rw-r--r--drivers/i2c/busses/i2c-omap.c226
-rw-r--r--drivers/i2c/busses/i2c-rcar.c6
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c211
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c150
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c145
-rw-r--r--include/linux/i2c-omap.h2
-rw-r--r--include/linux/i2c/i2c-sh_mobile.h1
-rw-r--r--include/linux/platform_data/i2c-cbus-gpio.h27
27 files changed, 1480 insertions, 359 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
new file mode 100644
index 0000000..8ce9cd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
@@ -0,0 +1,27 @@
+Device tree bindings for i2c-cbus-gpio driver
+
+Required properties:
+ - compatible = "i2c-cbus-gpio";
+ - gpios: clk, dat, sel
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Optional properties:
+ - child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@0 {
+ compatible = "i2c-cbus-gpio";
+ gpios = <&gpio 66 0 /* clk */
+ &gpio 65 0 /* dat */
+ &gpio 64 0 /* sel */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ retu-mfd: retu@1 {
+ compatible = "retu-mfd";
+ reg = <0x1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
new file mode 100644
index 0000000..66709a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
@@ -0,0 +1,81 @@
+GPIO-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses GPIOs to
+route the I2C signals.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------+ +-----+ +-----+
+ | SoC | | |
+ | | /--------+--------+
+ | +------+ | +------+ child bus A, on GPIO value set to 0
+ | | I2C |-|--| Mux |
+ | +------+ | +--+---+ child bus B, on GPIO value set to 1
+ | | | \----------+--------+--------+
+ | +------+ | | | | |
+ | | GPIO |-|-----+ +-----+ +-----+ +-----+
+ | +------+ | | dev | | dev | | dev |
+ +------------+ +-----+ +-----+ +-----+
+
+Required properties:
+- compatible: i2c-mux-gpio
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+- mux-gpios: list of gpios used to control the muxer
+* Standard I2C mux properties. See mux.txt in this directory.
+* I2C child bus nodes. See mux.txt in this directory.
+
+Optional properties:
+- idle-state: value to set the muxer to when idle. When no value is
+ given, it defaults to the last value used.
+
+For each i2c child node, an I2C child bus will be created. They will
+be numbered based on their order in the device tree.
+
+Whenever an access is made to a device on a child bus, the value set
+in the revelant node's reg property will be output using the list of
+GPIOs, the first in the list holding the least-significant value.
+
+If an idle state is defined, using the idle-state (optional) property,
+whenever an access is not being made to a device on a child bus, the
+GPIOs will be set according to the idle value.
+
+If an idle state is not defined, the most recently used value will be
+left programmed into hardware whenever no access is being made to a
+device on a child bus.
+
+Example:
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+ i2c-parent = <&i2c1>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 1>;
+ reset-active-low;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index c15781f..1637c29 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -1,7 +1,7 @@
Device tree configuration for i2c-ocores
Required properties:
-- compatible : "opencores,i2c-ocores"
+- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
- reg : bus address start and address range size of device
- interrupts : interrupt number
- clock-frequency : frequency of bus clock in Hz
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index b6cb5a1..e9611ac 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -13,11 +13,17 @@ Required properties:
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
+ - Samsung GPIO variant (deprecated):
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective clienta
+ - Pinctrl variant (preferred, if available):
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
Optional properties:
- - gpios: The order of the gpios should be the following: <SDA, SCL>.
- The gpio specifier depends on the gpio controller. Required in all
- cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
- lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
@@ -31,8 +37,14 @@ Example:
interrupts = <345>;
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <100000>;
+ /* Samsung GPIO variant begins here */
gpios = <&gpd1 2 0 /* SDA */
&gpd1 3 0 /* SCL */>;
+ /* Samsung GPIO variant ends here */
+ /* Pinctrl variant begins here */
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ /* Pinctrl variant ends here */
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index b222614..bdc80a4 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -92,6 +92,30 @@
status = "okay";
};
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+ i2c-parent = <&i2c1>;
+
+ i2c@0 {
+ reg = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ };
+ };
+
usbphy1: usbphy@8007e000 {
status = "okay";
};
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index a4e167c..0abb30f 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -16,10 +16,12 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/stddef.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
@@ -40,6 +42,45 @@
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
+#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+static struct i2c_cbus_platform_data n8x0_cbus_data = {
+ .clk_gpio = 66,
+ .dat_gpio = 65,
+ .sel_gpio = 64,
+};
+
+static struct platform_device n8x0_cbus_device = {
+ .name = "i2c-cbus-gpio",
+ .id = 3,
+ .dev = {
+ .platform_data = &n8x0_cbus_data,
+ },
+};
+
+static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = {
+ {
+ I2C_BOARD_INFO("retu-mfd", 0x01),
+ },
+};
+
+static void __init n8x0_cbus_init(void)
+{
+ const int retu_irq_gpio = 108;
+
+ if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
+ return;
+ irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+ n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio);
+ i2c_register_board_info(3, n8x0_i2c_board_info_3,
+ ARRAY_SIZE(n8x0_i2c_board_info_3));
+ platform_device_register(&n8x0_cbus_device);
+}
+#else /* CONFIG_I2C_CBUS_GPIO */
+static void __init n8x0_cbus_init(void)
+{
+}
+#endif /* CONFIG_I2C_CBUS_GPIO */
+
#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
@@ -678,6 +719,7 @@ static void __init n8x0_init_machine(void)
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
+ n8x0_cbus_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fbb9b15..df6d6acb 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -120,6 +120,16 @@ static int __init omap_i2c_nr_ports(void)
return ports;
}
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
static const char name[] = "omap_i2c";
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
@@ -157,6 +167,15 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
pdata->flags = dev_attr->flags;
+ /*
+ * When waiting for completion of a i2c transfer, we need to
+ * set a wake up latency constraint for the MPU. This is to
+ * ensure quick enough wakeup from idle, when transfer
+ * completes.
+ * Only omap3 has support for constraints
+ */
+ if (cpu_is_omap34xx())
+ pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
NULL, 0, 0);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6c8fa70..d2d3840 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -77,8 +77,7 @@ static struct omap_hwmod_class i2c_class = {
static struct omap_i2c_dev_attr i2c_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 32820d89..081c71e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1118,8 +1118,7 @@ static struct omap_hwmod_class i2c_class = {
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ec4499e..8bb2628 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -794,9 +794,7 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
@@ -821,9 +819,7 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
/* I2C2 */
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
@@ -848,9 +844,7 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
/* I2C3 */
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eb61cfd..272b017 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1529,8 +1529,7 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c7bff51..bdca511 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -337,6 +337,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
help
The unit of the TWI clock is kHz.
+config I2C_CBUS_GPIO
+ tristate "CBUS I2C driver"
+ depends on GENERIC_GPIO
+ help
+ Support for CBUS access using I2C API. Mostly relevant for Nokia
+ Internet Tablets (770, N800 and N810).
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-cbus-gpio.
+
config I2C_CPM
tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
depends on (CPM1 || CPM2) && OF_I2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e5cb209..6181f3f 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index c02bf20..b4575ee 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -19,6 +19,8 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -29,9 +31,11 @@
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/platform_data/dma-atmel.h>
#define TWI_CLK_HZ 100000 /* max 400 Kbits/s */
#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
+#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
/* AT91 TWI register definitions */
#define AT91_TWI_CR 0x0000 /* Control Register */
@@ -66,24 +70,39 @@
#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
struct at91_twi_pdata {
- unsigned clk_max_div;
- unsigned clk_offset;
- bool has_unre_flag;
+ unsigned clk_max_div;
+ unsigned clk_offset;
+ bool has_unre_flag;
+ bool has_dma_support;
+ struct at_dma_slave dma_slave;
+};
+
+struct at91_twi_dma {
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_tx;
+ struct scatterlist sg;
+ struct dma_async_tx_descriptor *data_desc;
+ enum dma_data_direction direction;
+ bool buf_mapped;
+ bool xfer_in_progress;
};
struct at91_twi_dev {
- struct device *dev;
- void __iomem *base;
- struct completion cmd_complete;
- struct clk *clk;
- u8 *buf;
- size_t buf_len;
- struct i2c_msg *msg;
- int irq;
- unsigned transfer_status;
- struct i2c_adapter adapter;
- unsigned twi_cwgr_reg;
- struct at91_twi_pdata *pdata;
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct clk *clk;
+ u8 *buf;
+ size_t buf_len;
+ struct i2c_msg *msg;
+ int irq;
+ unsigned imr;
+ unsigned transfer_status;
+ struct i2c_adapter adapter;
+ unsigned twi_cwgr_reg;
+ struct at91_twi_pdata *pdata;
+ bool use_dma;
+ struct at91_twi_dma dma;
};
static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
@@ -102,6 +121,17 @@ static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY);
}
+static void at91_twi_irq_save(struct at91_twi_dev *dev)
+{
+ dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & 0x7;
+ at91_disable_twi_interrupts(dev);
+}
+
+static void at91_twi_irq_restore(struct at91_twi_dev *dev)
+{
+ at91_twi_write(dev, AT91_TWI_IER, dev->imr);
+}
+
static void at91_init_twi_bus(struct at91_twi_dev *dev)
{
at91_disable_twi_interrupts(dev);
@@ -138,6 +168,28 @@ static void __devinit at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv);
}
+static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
+{
+ struct at91_twi_dma *dma = &dev->dma;
+
+ at91_twi_irq_save(dev);
+
+ if (dma->xfer_in_progress) {
+ if (dma->direction == DMA_FROM_DEVICE)
+ dmaengine_terminate_all(dma->chan_rx);
+ else
+ dmaengine_terminate_all(dma->chan_tx);
+ dma->xfer_in_progress = false;
+ }
+ if (dma->buf_mapped) {
+ dma_unmap_single(dev->dev, sg_dma_address(&dma->sg),
+ dev->buf_len, dma->direction);
+ dma->buf_mapped = false;
+ }
+
+ at91_twi_irq_restore(dev);
+}
+
static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
{
if (dev->buf_len <= 0)
@@ -154,6 +206,60 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
++dev->buf;
}
+static void at91_twi_write_data_dma_callback(void *data)
+{
+ struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+ dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
+ dev->buf_len, DMA_MEM_TO_DEV);
+
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+}
+
+static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
+{
+ dma_addr_t dma_addr;
+ struct dma_async_tx_descriptor *txdesc;
+ struct at91_twi_dma *dma = &dev->dma;
+ struct dma_chan *chan_tx = dma->chan_tx;
+
+ if (dev->buf_len <= 0)
+ return;
+
+ dma->direction = DMA_TO_DEVICE;
+
+ at91_twi_irq_save(dev);
+ dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev->dev, dma_addr)) {
+ dev_err(dev->dev, "dma map failed\n");
+ return;
+ }
+ dma->buf_mapped = true;
+ at91_twi_irq_restore(dev);
+ sg_dma_len(&dma->sg) = dev->buf_len;
+ sg_dma_address(&dma->sg) = dma_addr;
+
+ txdesc = dmaengine_prep_slave_sg(chan_tx, &dma->sg, 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(dev->dev, "dma prep slave sg failed\n");
+ goto error;
+ }
+
+ txdesc->callback = at91_twi_write_data_dma_callback;
+ txdesc->callback_param = dev;
+
+ dma->xfer_in_progress = true;
+ dmaengine_submit(txdesc);
+ dma_async_issue_pending(chan_tx);
+
+ return;
+
+error:
+ at91_twi_dma_cleanup(dev);
+}
+
static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
{
if (dev->buf_len <= 0)
@@ -179,6 +285,61 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
++dev->buf;
}
+static void at91_twi_read_data_dma_callback(void *data)
+{
+ struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+ dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
+ dev->buf_len, DMA_DEV_TO_MEM);
+
+ /* The last two bytes have to be read without using dma */
+ dev->buf += dev->buf_len - 2;
+ dev->buf_len = 2;
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_RXRDY);
+}
+
+static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
+{
+ dma_addr_t dma_addr;
+ struct dma_async_tx_descriptor *rxdesc;
+ struct at91_twi_dma *dma = &dev->dma;
+ struct dma_chan *chan_rx = dma->chan_rx;
+
+ dma->direction = DMA_FROM_DEVICE;
+
+ /* Keep in mind that we won't use dma to read the last two bytes */
+ at91_twi_irq_save(dev);
+ dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len - 2,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev->dev, dma_addr)) {
+ dev_err(dev->dev, "dma map failed\n");
+ return;
+ }
+ dma->buf_mapped = true;
+ at91_twi_irq_restore(dev);
+ dma->sg.dma_address = dma_addr;
+ sg_dma_len(&dma->sg) = dev->buf_len - 2;
+
+ rxdesc = dmaengine_prep_slave_sg(chan_rx, &dma->sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc) {
+ dev_err(dev->dev, "dma prep slave sg failed\n");
+ goto error;
+ }
+
+ rxdesc->callback = at91_twi_read_data_dma_callback;
+ rxdesc->callback_param = dev;
+
+ dma->xfer_in_progress = true;
+ dmaengine_submit(rxdesc);
+ dma_async_issue_pending(dma->chan_rx);
+
+ return;
+
+error:
+ at91_twi_dma_cleanup(dev);
+}
+
static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
{
struct at91_twi_dev *dev = dev_id;
@@ -229,12 +390,36 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN))
start_flags |= AT91_TWI_STOP;
at91_twi_write(dev, AT91_TWI_CR, start_flags);
- at91_twi_write(dev, AT91_TWI_IER,
+ /*
+ * When using dma, the last byte has to be read manually in
+ * order to not send the stop command too late and then
+ * to receive extra data. In practice, there are some issues
+ * if you use the dma to read n-1 bytes because of latency.
+ * Reading n-2 bytes with dma and the two last ones manually
+ * seems to be the best solution.
+ */
+ if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+ at91_twi_read_data_dma(dev);
+ /*
+ * It is important to enable TXCOMP irq here because
+ * doing it only when transferring the last two bytes
+ * will mask NACK errors since TXCOMP is set when a
+ * NACK occurs.
+ */
+ at91_twi_write(dev, AT91_TWI_IER,
+ AT91_TWI_TXCOMP);
+ } else
+ at91_twi_write(dev, AT91_TWI_IER,
AT91_TWI_TXCOMP | AT91_TWI_RXRDY);
} else {
- at91_twi_write_next_byte(dev);
- at91_twi_write(dev, AT91_TWI_IER,
- AT91_TWI_TXCOMP | AT91_TWI_TXRDY);
+ if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+ at91_twi_write_data_dma(dev);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else {
+ at91_twi_write_next_byte(dev);
+ at91_twi_write(dev, AT91_TWI_IER,
+ AT91_TWI_TXCOMP | AT91_TWI_TXRDY);
+ }
}
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
@@ -242,23 +427,31 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
at91_init_twi_bus(dev);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto error;
}
if (dev->transfer_status & AT91_TWI_NACK) {
dev_dbg(dev->dev, "received nack\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto error;
}
if (dev->transfer_status & AT91_TWI_OVRE) {
dev_err(dev->dev, "overrun while reading\n");
- return -EIO;
+ ret = -EIO;
+ goto error;
}
if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
dev_err(dev->dev, "underrun while writing\n");
- return -EIO;
+ ret = -EIO;
+ goto error;
}
dev_dbg(dev->dev, "transfer complete\n");
return 0;
+
+error:
+ at91_twi_dma_cleanup(dev);
+ return ret;
}
static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
@@ -329,36 +522,42 @@ static struct at91_twi_pdata at91rm9200_config = {
.clk_max_div = 5,
.clk_offset = 3,
.has_unre_flag = true,
+ .has_dma_support = false,
};
static struct at91_twi_pdata at91sam9261_config = {
.clk_max_div = 5,
.clk_offset = 4,
.has_unre_flag = false,
+ .has_dma_support = false,
};
static struct at91_twi_pdata at91sam9260_config = {
.clk_max_div = 7,
.clk_offset = 4,
.has_unre_flag = false,
+ .has_dma_support = false,
};
static struct at91_twi_pdata at91sam9g20_config = {
.clk_max_div = 7,
.clk_offset = 4,
.has_unre_flag = false,
+ .has_dma_support = false,
};
static struct at91_twi_pdata at91sam9g10_config = {
.clk_max_div = 7,
.clk_offset = 4,
.has_unre_flag = false,
+ .has_dma_support = false,
};
static struct at91_twi_pdata at91sam9x5_config = {
.clk_max_div = 7,
.clk_offset = 4,
.has_unre_flag = false,
+ .has_dma_support = true,
};
static const struct platform_device_id at91_twi_devtypes[] = {
@@ -405,6 +604,90 @@ MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
#define atmel_twi_dt_ids NULL
#endif
+static bool __devinit filter(struct dma_chan *chan, void *slave)
+{
+ struct at_dma_slave *sl = slave;
+
+ if (sl->dma_dev == chan->device->dev) {
+ chan->private = sl;
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static int __devinit at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
+{
+ int ret = 0;
+ struct at_dma_slave *sdata;
+ struct dma_slave_config slave_config;
+ struct at91_twi_dma *dma = &dev->dma;
+
+ sdata = &dev->pdata->dma_slave;
+
+ memset(&slave_config, 0, sizeof(slave_config));
+ slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
+ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.src_maxburst = 1;
+ slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
+ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.dst_maxburst = 1;
+ slave_config.device_fc = false;
+
+ if (sdata && sdata->dma_dev) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma->chan_tx = dma_request_channel(mask, filter, sdata);
+ if (!dma->chan_tx) {
+ dev_err(dev->dev, "no DMA channel available for tx\n");
+ ret = -EBUSY;
+ goto error;
+ }
+ dma->chan_rx = dma_request_channel(mask, filter, sdata);
+ if (!dma->chan_rx) {
+ dev_err(dev->dev, "no DMA channel available for rx\n");
+ ret = -EBUSY;
+ goto error;
+ }
+ } else {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ slave_config.direction = DMA_MEM_TO_DEV;
+ if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
+ dev_err(dev->dev, "failed to configure tx channel\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ slave_config.direction = DMA_DEV_TO_MEM;
+ if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
+ dev_err(dev->dev, "failed to configure rx channel\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ sg_init_table(&dma->sg, 1);
+ dma->buf_mapped = false;
+ dma->xfer_in_progress = false;
+
+ dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+ dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+ return ret;
+
+error:
+ dev_info(dev->dev, "can't use DMA\n");
+ if (dma->chan_rx)
+ dma_release_channel(dma->chan_rx);
+ if (dma->chan_tx)
+ dma_release_channel(dma->chan_tx);
+ return ret;
+}
+
static struct at91_twi_pdata * __devinit at91_twi_get_driver_data(
struct platform_device *pdev)
{
@@ -413,7 +696,7 @@ static struct at91_twi_pdata * __devinit at91_twi_get_driver_data(
match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
if (!match)
return NULL;
- return match->data;
+ return (struct at91_twi_pdata *)match->data;
}
return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
}
@@ -423,6 +706,7 @@ static int __devinit at91_twi_probe(struct platform_device *pdev)
struct at91_twi_dev *dev;
struct resource *mem;
int rc;
+ u32 phy_addr;
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
@@ -433,6 +717,7 @@ static int __devinit at91_twi_probe(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem)
return -ENODEV;
+ phy_addr = mem->start;
dev->pdata = at91_twi_get_driver_data(pdev);
if (!dev->pdata)
@@ -462,6 +747,11 @@ static int __devinit at91_twi_probe(struct platform_device *pdev)
}
clk_prepare_enable(dev->clk);
+ if (dev->pdata->has_dma_support) {
+ if (at91_twi_configure_dma(dev, phy_addr) == 0)
+ dev->use_dma = true;
+ }
+
at91_calc_twi_clock(dev, TWI_CLK_HZ);
at91_init_twi_bus(dev);
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
new file mode 100644
index 0000000..98386d6
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -0,0 +1,300 @@
+/*
+ * CBUS I2C driver for Nokia Internet Tablets.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Based on code written by Juha Yrjölä, David Weinehall, Mikko Ylinen and
+ * Felipe Balbi. Converted to I2C driver by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
+
+/*
+ * Bit counts are derived from Nokia implementation. These should be checked
+ * if other CBUS implementations appear.
+ */
+#define CBUS_ADDR_BITS 3
+#define CBUS_REG_BITS 5
+
+struct cbus_host {
+ spinlock_t lock; /* host lock */
+ struct device *dev;
+ int clk_gpio;
+ int dat_gpio;
+ int sel_gpio;
+};
+
+/**
+ * cbus_send_bit - sends one bit over the bus
+ * @host: the host we're using
+ * @bit: one bit of information to send
+ */
+static void cbus_send_bit(struct cbus_host *host, unsigned bit)
+{
+ gpio_set_value(host->dat_gpio, bit ? 1 : 0);
+ gpio_set_value(host->clk_gpio, 1);
+ gpio_set_value(host->clk_gpio, 0);
+}
+
+/**
+ * cbus_send_data - sends @len amount of data over the bus
+ * @host: the host we're using
+ * @data: the data to send
+ * @len: size of the transfer
+ */
+static void cbus_send_data(struct cbus_host *host, unsigned data, unsigned len)
+{
+ int i;
+
+ for (i = len; i > 0; i--)
+ cbus_send_bit(host, data & (1 << (i - 1)));
+}
+
+/**
+ * cbus_receive_bit - receives one bit from the bus
+ * @host: the host we're using
+ */
+static int cbus_receive_bit(struct cbus_host *host)
+{
+ int ret;
+
+ gpio_set_value(host->clk_gpio, 1);
+ ret = gpio_get_value(host->dat_gpio);
+ gpio_set_value(host->clk_gpio, 0);
+ return ret;
+}
+
+/**
+ * cbus_receive_word - receives 16-bit word from the bus
+ * @host: the host we're using
+ */
+static int cbus_receive_word(struct cbus_host *host)
+{
+ int ret = 0;
+ int i;
+
+ for (i = 16; i > 0; i--) {
+ int bit = cbus_receive_bit(host);
+
+ if (bit < 0)
+ return bit;
+
+ if (bit)
+ ret |= 1 << (i - 1);
+ }
+ return ret;
+}
+
+/**
+ * cbus_transfer - transfers data over the bus
+ * @host: the host we're using
+ * @rw: read/write flag
+ * @dev: device address
+ * @reg: register address
+ * @data: if @rw == I2C_SBUS_WRITE data to send otherwise 0
+ */
+static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev,
+ unsigned reg, unsigned data)
+{
+ unsigned long flags;
+ int ret;
+
+ /* We don't want interrupts disturbing our transfer */
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Reset state and start of transfer, SEL stays down during transfer */
+ gpio_set_value(host->sel_gpio, 0);
+
+ /* Set the DAT pin to output */
+ gpio_direction_output(host->dat_gpio, 1);
+
+ /* Send the device address */
+ cbus_send_data(host, dev, CBUS_ADDR_BITS);
+
+ /* Send the rw flag */
+ cbus_send_bit(host, rw == I2C_SMBUS_READ);
+
+ /* Send the register address */
+ cbus_send_data(host, reg, CBUS_REG_BITS);
+
+ if (rw == I2C_SMBUS_WRITE) {
+ cbus_send_data(host, data, 16);
+ ret = 0;
+ } else {
+ ret = gpio_direction_input(host->dat_gpio);
+ if (ret) {
+ dev_dbg(host->dev, "failed setting direction\n");
+ goto out;
+ }
+ gpio_set_value(host->clk_gpio, 1);
+
+ ret = cbus_receive_word(host);
+ if (ret < 0) {
+ dev_dbg(host->dev, "failed receiving data\n");
+ goto out;
+ }
+ }
+
+ /* Indicate end of transfer, SEL goes up until next transfer */
+ gpio_set_value(host->sel_gpio, 1);
+ gpio_set_value(host->clk_gpio, 1);
+ gpio_set_value(host->clk_gpio, 0);
+
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return ret;
+}
+
+static int cbus_i2c_smbus_xfer(struct i2c_adapter *adapter,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data *data)
+{
+ struct cbus_host *chost = i2c_get_adapdata(adapter);
+ int ret;
+
+ if (size != I2C_SMBUS_WORD_DATA)
+ return -EINVAL;
+
+ ret = cbus_transfer(chost, read_write == I2C_SMBUS_READ, addr,
+ command, data->word);
+ if (ret < 0)
+ return ret;
+
+ if (read_write == I2C_SMBUS_READ)
+ data->word = ret;
+
+ return 0;
+}
+
+static u32 cbus_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA;
+}
+
+static const struct i2c_algorithm cbus_i2c_algo = {
+ .smbus_xfer = cbus_i2c_smbus_xfer,
+ .functionality = cbus_i2c_func,
+};
+
+static int cbus_i2c_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+
+ return i2c_del_adapter(adapter);
+}
+
+static int cbus_i2c_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ struct cbus_host *chost;
+ int ret;
+
+ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter),
+ GFP_KERNEL);
+ if (!adapter)
+ return -ENOMEM;
+
+ chost = devm_kzalloc(&pdev->dev, sizeof(*chost), GFP_KERNEL);
+ if (!chost)
+ return -ENOMEM;
+
+ if (pdev->dev.of_node) {
+ struct device_node *dnode = pdev->dev.of_node;
+ if (of_gpio_count(dnode) != 3)
+ return -ENODEV;
+ chost->clk_gpio = of_get_gpio(dnode, 0);
+ chost->dat_gpio = of_get_gpio(dnode, 1);
+ chost->sel_gpio = of_get_gpio(dnode, 2);
+ } else if (pdev->dev.platform_data) {
+ struct i2c_cbus_platform_data *pdata = pdev->dev.platform_data;
+ chost->clk_gpio = pdata->clk_gpio;
+ chost->dat_gpio = pdata->dat_gpio;
+ chost->sel_gpio = pdata->sel_gpio;
+ } else {
+ return -ENODEV;
+ }
+
+ adapter->owner = THIS_MODULE;
+ adapter->class = I2C_CLASS_HWMON;
+ adapter->dev.parent = &pdev->dev;
+ adapter->nr = pdev->id;
+ adapter->timeout = HZ;
+ adapter->algo = &cbus_i2c_algo;
+ strlcpy(adapter->name, "CBUS I2C adapter", sizeof(adapter->name));
+
+ spin_lock_init(&chost->lock);
+ chost->dev = &pdev->dev;
+
+ ret = devm_gpio_request_one(&pdev->dev, chost->clk_gpio,
+ GPIOF_OUT_INIT_LOW, "CBUS clk");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(&pdev->dev, chost->dat_gpio, GPIOF_IN,
+ "CBUS data");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(&pdev->dev, chost->sel_gpio,
+ GPIOF_OUT_INIT_HIGH, "CBUS sel");
+ if (ret)
+ return ret;
+
+ i2c_set_adapdata(adapter, chost);
+ platform_set_drvdata(pdev, adapter);
+
+ return i2c_add_numbered_adapter(adapter);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id i2c_cbus_dt_ids[] = {
+ { .compatible = "i2c-cbus-gpio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2c_cbus_dt_ids);
+#endif
+
+static struct platform_driver cbus_i2c_driver = {
+ .probe = cbus_i2c_probe,
+ .remove = cbus_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "i2c-cbus-gpio",
+ },
+};
+module_platform_driver(cbus_i2c_driver);
+
+MODULE_ALIAS("platform:i2c-cbus-gpio");
+MODULE_DESCRIPTION("CBUS I2C driver");
+MODULE_AUTHOR("Juha Yrjölä");
+MODULE_AUTHOR("David Weinehall");
+MODULE_AUTHOR("Mikko Ylinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index e62d2d9..257299a 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -184,7 +184,11 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
bit_data->data = pdata;
adap->owner = THIS_MODULE;
- snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
+ if (pdev->dev.of_node)
+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
+ else
+ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
+
adap->algo_data = bit_data;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 0670da7..6ed53da 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -359,7 +359,7 @@ static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
static u32 mxs_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 02c3115..8b2ffcf 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -435,13 +435,6 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
- if (timeout < 0) {
- dev_err(&dev->adev->dev,
- "wait_for_completion_timeout "
- "returned %d waiting for event\n", timeout);
- status = timeout;
- }
-
if (timeout == 0) {
/* Controller timed out */
dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
@@ -523,13 +516,6 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
- if (timeout < 0) {
- dev_err(&dev->adev->dev,
- "wait_for_completion_timeout "
- "returned %d waiting for event\n", timeout);
- status = timeout;
- }
-
if (timeout == 0) {
/* Controller timed out */
dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 15da1ac..9b35c9f 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -4,6 +4,9 @@
*
* Peter Korsgaard <jacmet@sunsite.dk>
*
+ * Support for the GRLIB port of the controller by
+ * Andreas Larsson <andreas@gaisler.com>
+ *
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
@@ -34,6 +37,8 @@ struct ocores_i2c {
int nmsgs;
int state; /* see STATE_ */
int clock_khz;
+ void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value);
+ u8 (*getreg)(struct ocores_i2c *i2c, int reg);
};
/* registers */
@@ -67,24 +72,47 @@ struct ocores_i2c {
#define STATE_READ 3
#define STATE_ERROR 4
+#define TYPE_OCORES 0
+#define TYPE_GRLIB 1
+
+static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite8(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite16(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite32(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg)
+{
+ return ioread8(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg)
+{
+ return ioread16(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg)
+{
+ return ioread32(i2c->base + (reg << i2c->reg_shift));
+}
+
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
- if (i2c->reg_io_width == 4)
- iowrite32(value, i2c->base + (reg << i2c->reg_shift));
- else if (i2c->reg_io_width == 2)
- iowrite16(value, i2c->base + (reg << i2c->reg_shift));
- else
- iowrite8(value, i2c->base + (reg << i2c->reg_shift));
+ i2c->setreg(i2c, reg, value);
}
static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
{
- if (i2c->reg_io_width == 4)
- return ioread32(i2c->base + (reg << i2c->reg_shift));
- else if (i2c->reg_io_width == 2)
- return ioread16(i2c->base + (reg << i2c->reg_shift));
- else
- return ioread8(i2c->base + (reg << i2c->reg_shift));
+ return i2c->getreg(i2c, reg);
}
static void ocores_process(struct ocores_i2c *i2c)
@@ -223,11 +251,59 @@ static struct i2c_adapter ocores_adapter = {
.algo = &ocores_algorithm,
};
+static struct of_device_id ocores_i2c_match[] = {
+ {
+ .compatible = "opencores,i2c-ocores",
+ .data = (void *)TYPE_OCORES,
+ },
+ {
+ .compatible = "aeroflexgaisler,i2cmst",
+ .data = (void *)TYPE_GRLIB,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ocores_i2c_match);
+
#ifdef CONFIG_OF
+/* Read and write functions for the GRLIB port of the controller. Registers are
+ * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
+ * register. The subsequent registers has their offset decreased accordingly. */
+static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
+{
+ u32 rd;
+ int rreg = reg;
+ if (reg != OCI2C_PRELOW)
+ rreg--;
+ rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
+ if (reg == OCI2C_PREHIGH)
+ return (u8)(rd >> 8);
+ else
+ return (u8)rd;
+}
+
+static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ u32 curr, wr;
+ int rreg = reg;
+ if (reg != OCI2C_PRELOW)
+ rreg--;
+ if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
+ curr = ioread32be(i2c->base + (rreg << i2c->reg_shift));
+ if (reg == OCI2C_PRELOW)
+ wr = (curr & 0xff00) | value;
+ else
+ wr = (((u32)value) << 8) | (curr & 0xff);
+ } else {
+ wr = value;
+ }
+ iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift));
+}
+
static int ocores_i2c_of_probe(struct platform_device *pdev,
struct ocores_i2c *i2c)
{
struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
u32 val;
if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) {
@@ -253,6 +329,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
of_property_read_u32(pdev->dev.of_node, "reg-io-width",
&i2c->reg_io_width);
+
+ match = of_match_node(ocores_i2c_match, pdev->dev.of_node);
+ if (match && (int)match->data == TYPE_GRLIB) {
+ dev_dbg(&pdev->dev, "GRLIB variant of i2c-ocores\n");
+ i2c->setreg = oc_setreg_grlib;
+ i2c->getreg = oc_getreg_grlib;
+ }
+
return 0;
}
#else
@@ -263,7 +347,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
{
struct ocores_i2c *i2c;
struct ocores_i2c_platform_data *pdata;
- struct resource *res, *res2;
+ struct resource *res;
+ int irq;
int ret;
int i;
@@ -271,26 +356,17 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2)
- return -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "Memory region busy\n");
- return -EBUSY;
- }
-
- i2c->base = devm_ioremap_nocache(&pdev->dev, res->start,
- resource_size(res));
- if (!i2c->base) {
- dev_err(&pdev->dev, "Unable to map registers\n");
- return -EIO;
- }
+ i2c->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!i2c->base)
+ return -EADDRNOTAVAIL;
pdata = pdev->dev.platform_data;
if (pdata) {
@@ -306,10 +382,34 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
if (i2c->reg_io_width == 0)
i2c->reg_io_width = 1; /* Set to default value */
+ if (!i2c->setreg || !i2c->getreg) {
+ switch (i2c->reg_io_width) {
+ case 1:
+ i2c->setreg = oc_setreg_8;
+ i2c->getreg = oc_getreg_8;
+ break;
+
+ case 2:
+ i2c->setreg = oc_setreg_16;
+ i2c->getreg = oc_getreg_16;
+ break;
+
+ case 4:
+ i2c->setreg = oc_setreg_32;
+ i2c->getreg = oc_getreg_32;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
+ i2c->reg_io_width);
+ return -EINVAL;
+ }
+ }
+
ocores_init(i2c);
init_waitqueue_head(&i2c->wait);
- ret = devm_request_irq(&pdev->dev, res2->start, ocores_isr, 0,
+ ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
@@ -383,12 +483,6 @@ static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume);
#define OCORES_I2C_PM NULL
#endif
-static struct of_device_id ocores_i2c_match[] = {
- { .compatible = "opencores,i2c-ocores", },
- {},
-};
-MODULE_DEVICE_TABLE(of, ocores_i2c_match);
-
static struct platform_driver ocores_i2c_driver = {
.probe = ocores_i2c_probe,
.remove = __devexit_p(ocores_i2c_remove),
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 3525c9e..7a62acb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,14 +43,16 @@
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
/* I2C controller revisions present on specific hardware */
-#define OMAP_I2C_REV_ON_2430 0x36
-#define OMAP_I2C_REV_ON_3430_3530 0x3C
-#define OMAP_I2C_REV_ON_3630_4430 0x40
+#define OMAP_I2C_REV_ON_2430 0x00000036
+#define OMAP_I2C_REV_ON_3430_3530 0x0000003C
+#define OMAP_I2C_REV_ON_3630 0x00000040
+#define OMAP_I2C_REV_ON_4430_PLUS 0x50400002
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -190,7 +192,6 @@ struct omap_i2c_dev {
void (*set_mpu_wkup_lat)(struct device *dev,
long latency);
u32 speed; /* Speed of bus in kHz */
- u32 dtrev; /* extra revision from DT */
u32 flags;
u16 cmd_err;
u8 *buf;
@@ -202,17 +203,18 @@ struct omap_i2c_dev {
* fifo_size==0 implies no fifo
* if set, should be trsh+1
*/
- u8 rev;
+ u32 rev;
unsigned b_hw:1; /* bad h/w fixes */
unsigned receiver:1; /* true when we're in receiver mode */
u16 iestate; /* Saved interrupt register */
u16 pscstate;
u16 scllstate;
u16 sclhstate;
- u16 bufstate;
u16 syscstate;
u16 westate;
u16 errata;
+
+ struct pinctrl *pins;
};
static const u8 reg_map_ip_v1[] = {
@@ -275,16 +277,39 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static void __omap_i2c_init(struct omap_i2c_dev *dev)
+{
+
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+
+ /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
+ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
+
+ /* SCL low and high time values */
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
+ if (dev->rev >= OMAP_I2C_REV_ON_3430_3530)
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+
+ /* Take the I2C module out of reset: */
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+
+ /*
+ * Don't write to this register if the IE state is 0 as it can
+ * cause deadlock.
+ */
+ if (dev->iestate)
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+}
+
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
{
- u16 psc = 0, scll = 0, sclh = 0, buf = 0;
- u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
- unsigned long fclk_rate = 12000000;
unsigned long timeout;
- unsigned long internal_clk = 0;
- struct clk *fclk;
+ u16 sysc;
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
+ sysc = omap_i2c_read_reg(dev, OMAP_I2C_SYSC_REG);
+
/* Disable I2C controller before soft reset */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
@@ -306,32 +331,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
}
/* SYSC register is cleared by the reset; rewrite it */
- if (dev->rev == OMAP_I2C_REV_ON_2430) {
-
- omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
- SYSC_AUTOIDLE_MASK);
-
- } else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
- dev->syscstate = SYSC_AUTOIDLE_MASK;
- dev->syscstate |= SYSC_ENAWAKEUP_MASK;
- dev->syscstate |= (SYSC_IDLEMODE_SMART <<
- __ffs(SYSC_SIDLEMODE_MASK));
- dev->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
- __ffs(SYSC_CLOCKACTIVITY_MASK));
-
- omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
- dev->syscstate);
- /*
- * Enabling all wakup sources to stop I2C freezing on
- * WFI instruction.
- * REVISIT: Some wkup sources might not be needed.
- */
- dev->westate = OMAP_I2C_WE_ALL;
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
- dev->westate);
- }
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, sysc);
+
+ }
+ return 0;
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+ u16 psc = 0, scll = 0, sclh = 0;
+ u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+ unsigned long fclk_rate = 12000000;
+ unsigned long internal_clk = 0;
+ struct clk *fclk;
+
+ if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
+ /*
+ * Enabling all wakup sources to stop I2C freezing on
+ * WFI instruction.
+ * REVISIT: Some wkup sources might not be needed.
+ */
+ dev->westate = OMAP_I2C_WE_ALL;
}
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
@@ -416,28 +437,17 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
}
- /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
- omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
-
- /* SCL low and high time values */
- omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
- omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
-
- /* Take the I2C module out of reset: */
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
-
- /* Enable interrupts */
dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
- if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
- dev->pscstate = psc;
- dev->scllstate = scll;
- dev->sclhstate = sclh;
- dev->bufstate = buf;
- }
+
+ dev->pscstate = psc;
+ dev->scllstate = scll;
+ dev->sclhstate = sclh;
+
+ __omap_i2c_init(dev);
+
return 0;
}
@@ -490,7 +500,7 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx)
omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf);
- if (dev->rev < OMAP_I2C_REV_ON_3630_4430)
+ if (dev->rev < OMAP_I2C_REV_ON_3630)
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
@@ -586,7 +596,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
OMAP_I2C_TIMEOUT);
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
- omap_i2c_init(dev);
+ omap_i2c_reset(dev);
+ __omap_i2c_init(dev);
return -ETIMEDOUT;
}
@@ -596,7 +607,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
/* We have an error */
if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
OMAP_I2C_STAT_XUDF)) {
- omap_i2c_init(dev);
+ omap_i2c_reset(dev);
+ __omap_i2c_init(dev);
return -EIO;
}
@@ -642,13 +654,14 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
break;
}
- if (dev->set_mpu_wkup_lat != NULL)
- dev->set_mpu_wkup_lat(dev->dev, -1);
-
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
+
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, -1);
+
out:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
@@ -1025,9 +1038,7 @@ static const struct i2c_algorithm omap_i2c_algo = {
#ifdef CONFIG_OF
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_i2c_bus_platform_data omap4_pdata = {
@@ -1048,6 +1059,16 @@ static const struct of_device_id omap_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
#endif
+#define OMAP_I2C_SCHEME(rev) ((rev & 0xc000) >> 14)
+
+#define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4)
+#define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf)
+
+#define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7)
+#define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f)
+#define OMAP_I2C_SCHEME_0 0
+#define OMAP_I2C_SCHEME_1 1
+
static int __devinit
omap_i2c_probe(struct platform_device *pdev)
{
@@ -1060,6 +1081,8 @@ omap_i2c_probe(struct platform_device *pdev)
const struct of_device_id *match;
int irq;
int r;
+ u32 rev;
+ u16 minor, major, scheme;
/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1091,7 +1114,6 @@ omap_i2c_probe(struct platform_device *pdev)
u32 freq = 100000; /* default to 100000 Hz */
pdata = match->data;
- dev->dtrev = pdata->rev;
dev->flags = pdata->flags;
of_property_read_u32(node, "clock-frequency", &freq);
@@ -1101,7 +1123,16 @@ omap_i2c_probe(struct platform_device *pdev)
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
- dev->dtrev = pdata->rev;
+ }
+
+ dev->pins = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(dev->pins)) {
+ if (PTR_ERR(dev->pins) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(&pdev->dev, "did not get pins for i2c error: %li\n",
+ PTR_ERR(dev->pins));
+ dev->pins = NULL;
}
dev->dev = &pdev->dev;
@@ -1114,11 +1145,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
- if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
- dev->regs = (u8 *)reg_map_ip_v2;
- else
- dev->regs = (u8 *)reg_map_ip_v1;
-
pm_runtime_enable(dev->dev);
pm_runtime_set_autosuspend_delay(dev->dev, OMAP_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(dev->dev);
@@ -1127,11 +1153,37 @@ omap_i2c_probe(struct platform_device *pdev)
if (IS_ERR_VALUE(r))
goto err_free_mem;
- dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+ /*
+ * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
+ * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
+ * Also since the omap_i2c_read_reg uses reg_map_ip_* a
+ * raw_readw is done.
+ */
+ rev = __raw_readw(dev->base + 0x04);
+
+ scheme = OMAP_I2C_SCHEME(rev);
+ switch (scheme) {
+ case OMAP_I2C_SCHEME_0:
+ dev->regs = (u8 *)reg_map_ip_v1;
+ dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG);
+ minor = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev);
+ major = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev);
+ break;
+ case OMAP_I2C_SCHEME_1:
+ /* FALLTHROUGH */
+ default:
+ dev->regs = (u8 *)reg_map_ip_v2;
+ rev = (rev << 16) |
+ omap_i2c_read_reg(dev, OMAP_I2C_IP_V2_REVNB_LO);
+ minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev);
+ major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev);
+ dev->rev = rev;
+ }
dev->errata = 0;
- if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+ if (dev->rev >= OMAP_I2C_REV_ON_2430 &&
+ dev->rev < OMAP_I2C_REV_ON_4430_PLUS)
dev->errata |= I2C_OMAP_ERRATA_I207;
if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
@@ -1152,7 +1204,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->fifo_size = (dev->fifo_size / 2);
- if (dev->rev < OMAP_I2C_REV_ON_3630_4430)
+ if (dev->rev < OMAP_I2C_REV_ON_3630)
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
@@ -1195,8 +1247,8 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_unuse_clocks;
}
- dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr,
- dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+ dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
+ major, minor, dev->speed);
of_i2c_register_devices(adap);
@@ -1239,14 +1291,13 @@ static int omap_i2c_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
- u16 iv;
_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
- iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
+ omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate);
@@ -1262,23 +1313,10 @@ static int omap_i2c_runtime_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
- if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
- omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
- omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
- omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
- omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
- omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
- omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
- omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
- }
+ if (!_dev->regs)
+ return 0;
- /*
- * Don't write to this register if the IE state is 0 as it can
- * cause deadlock.
- */
- if (_dev->iestate)
- omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
+ __omap_i2c_init(_dev);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index f9399d1..72a8071 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -642,7 +642,7 @@ static int __devinit rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- priv->io = devm_ioremap(dev, res->start, resource_size(res));
+ priv->io = devm_request_and_ioremap(dev, res);
if (!priv->io) {
dev_err(dev, "cannot ioremap\n");
return -ENODEV;
@@ -693,7 +693,7 @@ static int __devexit rcar_i2c_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_driver rcar_i2c_drv = {
+static struct platform_driver rcar_i2c_driver = {
.driver = {
.name = "i2c-rcar",
.owner = THIS_MODULE,
@@ -702,7 +702,7 @@ static struct platform_driver rcar_i2c_drv = {
.remove = __devexit_p(rcar_i2c_remove),
};
-module_platform_driver(rcar_i2c_drv);
+module_platform_driver(rcar_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Renesas R-Car I2C bus driver");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index b33d95e..a290d08 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -38,6 +38,7 @@
#include <linux/io.h>
#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/irq.h>
@@ -49,6 +50,9 @@
#define QUIRK_HDMIPHY (1 << 1)
#define QUIRK_NO_GPIO (1 << 2)
+/* Max time to wait for bus to become idle after a xfer (in us) */
+#define S3C2410_IDLE_TIMEOUT 5000
+
/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
@@ -59,7 +63,6 @@ enum s3c24xx_i2c_state {
};
struct s3c24xx_i2c {
- spinlock_t lock;
wait_queue_head_t wait;
unsigned int quirks;
unsigned int suspended:1;
@@ -78,11 +81,11 @@ struct s3c24xx_i2c {
void __iomem *regs;
struct clk *clk;
struct device *dev;
- struct resource *ioarea;
struct i2c_adapter adap;
struct s3c2410_platform_i2c *pdata;
int gpios[2];
+ struct pinctrl *pctrl;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
@@ -235,8 +238,47 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
dev_dbg(i2c->dev, "STOP\n");
- /* stop the transfer */
- iicstat &= ~S3C2410_IICSTAT_START;
+ /*
+ * The datasheet says that the STOP sequence should be:
+ * 1) I2CSTAT.5 = 0 - Clear BUSY (or 'generate STOP')
+ * 2) I2CCON.4 = 0 - Clear IRQPEND
+ * 3) Wait until the stop condition takes effect.
+ * 4*) I2CSTAT.4 = 0 - Clear TXRXEN
+ *
+ * Where, step "4*" is only for buses with the "HDMIPHY" quirk.
+ *
+ * However, after much experimentation, it appears that:
+ * a) normal buses automatically clear BUSY and transition from
+ * Master->Slave when they complete generating a STOP condition.
+ * Therefore, step (3) can be done in doxfer() by polling I2CCON.4
+ * after starting the STOP generation here.
+ * b) HDMIPHY bus does neither, so there is no way to do step 3.
+ * There is no indication when this bus has finished generating
+ * STOP.
+ *
+ * In fact, we have found that as soon as the IRQPEND bit is cleared in
+ * step 2, the HDMIPHY bus generates the STOP condition, and then
+ * immediately starts transferring another data byte, even though the
+ * bus is supposedly stopped. This is presumably because the bus is
+ * still in "Master" mode, and its BUSY bit is still set.
+ *
+ * To avoid these extra post-STOP transactions on HDMI phy devices, we
+ * just disable Serial Output on the bus (I2CSTAT.4 = 0) directly,
+ * instead of first generating a proper STOP condition. This should
+ * float SDA & SCK terminating the transfer. Subsequent transfers
+ * start with a proper START condition, and proceed normally.
+ *
+ * The HDMIPHY bus is an internal bus that always has exactly two
+ * devices, the host as Master and the HDMIPHY device as the slave.
+ * Skipping the STOP condition has been tested on this bus and works.
+ */
+ if (i2c->quirks & QUIRK_HDMIPHY) {
+ /* Stop driving the I2C pins */
+ iicstat &= ~S3C2410_IICSTAT_TXRXEN;
+ } else {
+ /* stop the transfer */
+ iicstat &= ~S3C2410_IICSTAT_START;
+ }
writel(iicstat, i2c->regs + S3C2410_IICSTAT);
i2c->state = STATE_STOP;
@@ -490,13 +532,6 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
unsigned long iicstat;
int timeout = 400;
- /* the timeout for HDMIPHY is reduced to 10 ms because
- * the hangup is expected to happen, so waiting 400 ms
- * causes only unnecessary system hangup
- */
- if (i2c->quirks & QUIRK_HDMIPHY)
- timeout = 10;
-
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
@@ -506,16 +541,61 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
msleep(1);
}
- /* hang-up of bus dedicated for HDMIPHY occurred, resetting */
- if (i2c->quirks & QUIRK_HDMIPHY) {
- writel(0, i2c->regs + S3C2410_IICCON);
- writel(0, i2c->regs + S3C2410_IICSTAT);
- writel(0, i2c->regs + S3C2410_IICDS);
+ return -ETIMEDOUT;
+}
- return 0;
+/* s3c24xx_i2c_wait_idle
+ *
+ * wait for the i2c bus to become idle.
+*/
+
+static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
+{
+ unsigned long iicstat;
+ ktime_t start, now;
+ unsigned long delay;
+ int spins;
+
+ /* ensure the stop has been through the bus */
+
+ dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+ start = now = ktime_get();
+
+ /*
+ * Most of the time, the bus is already idle within a few usec of the
+ * end of a transaction. However, really slow i2c devices can stretch
+ * the clock, delaying STOP generation.
+ *
+ * On slower SoCs this typically happens within a very small number of
+ * instructions so busy wait briefly to avoid scheduling overhead.
+ */
+ spins = 3;
+ iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+ while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
+ cpu_relax();
+ iicstat = readl(i2c->regs + S3C2410_IICSTAT);
}
- return -ETIMEDOUT;
+ /*
+ * If we do get an appreciable delay as a compromise between idle
+ * detection latency for the normal, fast case, and system load in the
+ * slow device case, use an exponential back off in the polling loop,
+ * up to 1/10th of the total timeout, then continue to poll at a
+ * constant rate up to the timeout.
+ */
+ delay = 1;
+ while ((iicstat & S3C2410_IICSTAT_START) &&
+ ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
+ usleep_range(delay, 2 * delay);
+ if (delay < S3C2410_IDLE_TIMEOUT / 10)
+ delay <<= 1;
+ now = ktime_get();
+ iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+ }
+
+ if (iicstat & S3C2410_IICSTAT_START)
+ dev_warn(i2c->dev, "timeout waiting for bus idle\n");
}
/* s3c24xx_i2c_doxfer
@@ -526,8 +606,7 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
struct i2c_msg *msgs, int num)
{
- unsigned long iicstat, timeout;
- int spins = 20;
+ unsigned long timeout;
int ret;
if (i2c->suspended)
@@ -540,8 +619,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
goto out;
}
- spin_lock_irq(&i2c->lock);
-
i2c->msg = msgs;
i2c->msg_num = num;
i2c->msg_ptr = 0;
@@ -550,7 +627,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
s3c24xx_i2c_enable_irq(i2c);
s3c24xx_i2c_message_start(i2c, msgs);
- spin_unlock_irq(&i2c->lock);
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
@@ -564,24 +640,11 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
else if (ret != num)
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
- /* ensure the stop has been through the bus */
-
- dev_dbg(i2c->dev, "waiting for bus idle\n");
-
- /* first, try busy waiting briefly */
- do {
- cpu_relax();
- iicstat = readl(i2c->regs + S3C2410_IICSTAT);
- } while ((iicstat & S3C2410_IICSTAT_START) && --spins);
-
- /* if that timed out sleep */
- if (!spins) {
- msleep(1);
- iicstat = readl(i2c->regs + S3C2410_IICSTAT);
- }
+ /* For QUIRK_HDMIPHY, bus is already disabled */
+ if (i2c->quirks & QUIRK_HDMIPHY)
+ goto out;
- if (iicstat & S3C2410_IICSTAT_START)
- dev_warn(i2c->dev, "timeout waiting for bus idle\n");
+ s3c24xx_i2c_wait_idle(i2c);
out:
return ret;
@@ -740,7 +803,6 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
- unsigned long flags;
unsigned int got;
int delta_f;
int ret;
@@ -754,9 +816,9 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
(val == CPUFREQ_PRECHANGE && delta_f > 0)) {
- spin_lock_irqsave(&i2c->lock, flags);
+ i2c_lock_adapter(&i2c->adap);
ret = s3c24xx_i2c_clockrate(i2c, &got);
- spin_unlock_irqrestore(&i2c->lock, flags);
+ i2c_unlock_adapter(&i2c->adap);
if (ret < 0)
dev_err(i2c->dev, "cannot find frequency\n");
@@ -858,14 +920,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
pdata = i2c->pdata;
- /* inititalise the gpio */
-
- if (pdata->cfg_gpio)
- pdata->cfg_gpio(to_platform_device(i2c->dev));
- else
- if (s3c24xx_i2c_parse_dt_gpio(i2c))
- return -EINVAL;
-
/* write slave address */
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
@@ -963,7 +1017,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
i2c->tx_setup = 50;
- spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
/* find the clock and enable it */
@@ -989,36 +1042,38 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
goto err_clk;
}
- i2c->ioarea = request_mem_region(res->start, resource_size(res),
- pdev->name);
-
- if (i2c->ioarea == NULL) {
- dev_err(&pdev->dev, "cannot request IO\n");
- ret = -ENXIO;
- goto err_clk;
- }
-
- i2c->regs = ioremap(res->start, resource_size(res));
+ i2c->regs = devm_request_and_ioremap(&pdev->dev, res);
if (i2c->regs == NULL) {
dev_err(&pdev->dev, "cannot map IO\n");
ret = -ENXIO;
- goto err_ioarea;
+ goto err_clk;
}
- dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
- i2c->regs, i2c->ioarea, res);
+ dev_dbg(&pdev->dev, "registers %p (%p)\n",
+ i2c->regs, res);
/* setup info block for the i2c core */
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
+ i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
+
+ /* inititalise the i2c gpio lines */
+
+ if (i2c->pdata->cfg_gpio) {
+ i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
+ } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
+ ret = -EINVAL;
+ goto err_clk;
+ }
+
/* initialise the i2c controller */
ret = s3c24xx_i2c_init(i2c);
if (ret != 0)
- goto err_iomap;
+ goto err_clk;
/* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
@@ -1027,7 +1082,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
- goto err_iomap;
+ goto err_clk;
}
ret = request_irq(i2c->irq, s3c24xx_i2c_irq, 0,
@@ -1035,7 +1090,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
- goto err_iomap;
+ goto err_clk;
}
ret = s3c24xx_i2c_register_cpufreq(i2c);
@@ -1075,13 +1130,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
err_irq:
free_irq(i2c->irq, i2c);
- err_iomap:
- iounmap(i2c->regs);
-
- err_ioarea:
- release_resource(i2c->ioarea);
- kfree(i2c->ioarea);
-
err_clk:
clk_disable_unprepare(i2c->clk);
clk_put(i2c->clk);
@@ -1110,16 +1158,13 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
clk_disable_unprepare(i2c->clk);
clk_put(i2c->clk);
- iounmap(i2c->regs);
-
- release_resource(i2c->ioarea);
- s3c24xx_i2c_dt_gpio_free(i2c);
- kfree(i2c->ioarea);
+ if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
+ s3c24xx_i2c_dt_gpio_free(i2c);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int s3c24xx_i2c_suspend_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1142,10 +1187,14 @@ static int s3c24xx_i2c_resume(struct device *dev)
return 0;
}
+#endif
+#ifdef CONFIG_PM
static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
.suspend_noirq = s3c24xx_i2c_suspend_noirq,
.resume = s3c24xx_i2c_resume,
+#endif
};
#define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 8110ca4..9411c1b 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -120,11 +120,12 @@ struct sh_mobile_i2c_data {
void __iomem *reg;
struct i2c_adapter adap;
unsigned long bus_speed;
+ unsigned int clks_per_count;
struct clk *clk;
u_int8_t icic;
- u_int8_t iccl;
- u_int8_t icch;
u_int8_t flags;
+ u_int16_t iccl;
+ u_int16_t icch;
spinlock_t lock;
wait_queue_head_t wait;
@@ -135,7 +136,8 @@ struct sh_mobile_i2c_data {
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
-#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
+#define STANDARD_MODE 100000
+#define FAST_MODE 400000
/* Register offsets */
#define ICDR 0x00
@@ -187,57 +189,90 @@ static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
}
-static void activate_ch(struct sh_mobile_i2c_data *pd)
+static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf, int offset)
{
- unsigned long i2c_clk;
- u_int32_t num;
- u_int32_t denom;
- u_int32_t tmp;
-
- /* Wake up device and enable clock */
- pm_runtime_get_sync(pd->dev);
- clk_enable(pd->clk);
-
- /* Get clock rate after clock is enabled */
- i2c_clk = clk_get_rate(pd->clk);
+ /*
+ * Conditional expression:
+ * ICCL >= COUNT_CLK * (tLOW + tf)
+ *
+ * SH-Mobile IIC hardware starts counting the LOW period of
+ * the SCL signal (tLOW) as soon as it pulls the SCL line.
+ * In order to meet the tLOW timing spec, we need to take into
+ * account the fall time of SCL signal (tf). Default tf value
+ * should be 0.3 us, for safety.
+ */
+ return (((count_khz * (tLOW + tf)) + 5000) / 10000) + offset;
+}
- /* Calculate the value for iccl. From the data sheet:
- * iccl = (p clock / transfer rate) * (L / (L + H))
- * where L and H are the SCL low/high ratio (5/4 in this case).
- * We also round off the result.
+static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf, int offset)
+{
+ /*
+ * Conditional expression:
+ * ICCH >= COUNT_CLK * (tHIGH + tf)
+ *
+ * SH-Mobile IIC hardware is aware of SCL transition period 'tr',
+ * and can ignore it. SH-Mobile IIC controller starts counting
+ * the HIGH period of the SCL signal (tHIGH) after the SCL input
+ * voltage increases at VIH.
+ *
+ * Afterward it turned out calculating ICCH using only tHIGH spec
+ * will result in violation of the tHD;STA timing spec. We need
+ * to take into account the fall time of SDA signal (tf) at START
+ * condition, in order to meet both tHIGH and tHD;STA specs.
*/
- num = i2c_clk * 5;
- denom = pd->bus_speed * 9;
- tmp = num * 10 / denom;
- if (tmp % 10 >= 5)
- pd->iccl = (u_int8_t)((num/denom) + 1);
- else
- pd->iccl = (u_int8_t)(num/denom);
+ return (((count_khz * (tHIGH + tf)) + 5000) / 10000) + offset;
+}
- /* one more bit of ICCL in ICIC */
- if (pd->flags & IIC_FLAG_HAS_ICIC67) {
- if ((num/denom) > 0xff)
- pd->icic |= ICIC_ICCLB8;
- else
- pd->icic &= ~ICIC_ICCLB8;
+static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
+{
+ unsigned long i2c_clk_khz;
+ u32 tHIGH, tLOW, tf;
+ int offset;
+
+ /* Get clock rate after clock is enabled */
+ clk_enable(pd->clk);
+ i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
+ i2c_clk_khz /= pd->clks_per_count;
+
+ if (pd->bus_speed == STANDARD_MODE) {
+ tLOW = 47; /* tLOW = 4.7 us */
+ tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
+ tf = 3; /* tf = 0.3 us */
+ offset = 0; /* No offset */
+ } else if (pd->bus_speed == FAST_MODE) {
+ tLOW = 13; /* tLOW = 1.3 us */
+ tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
+ tf = 3; /* tf = 0.3 us */
+ offset = 0; /* No offset */
+ } else {
+ dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
+ pd->bus_speed);
+ goto out;
}
- /* Calculate the value for icch. From the data sheet:
- icch = (p clock / transfer rate) * (H / (L + H)) */
- num = i2c_clk * 4;
- tmp = num * 10 / denom;
- if (tmp % 10 >= 5)
- pd->icch = (u_int8_t)((num/denom) + 1);
+ pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf, offset);
+ /* one more bit of ICCL in ICIC */
+ if ((pd->iccl > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67))
+ pd->icic |= ICIC_ICCLB8;
else
- pd->icch = (u_int8_t)(num/denom);
+ pd->icic &= ~ICIC_ICCLB8;
+ pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf, offset);
/* one more bit of ICCH in ICIC */
- if (pd->flags & IIC_FLAG_HAS_ICIC67) {
- if ((num/denom) > 0xff)
- pd->icic |= ICIC_ICCHB8;
- else
- pd->icic &= ~ICIC_ICCHB8;
- }
+ if ((pd->icch > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67))
+ pd->icic |= ICIC_ICCHB8;
+ else
+ pd->icic &= ~ICIC_ICCHB8;
+
+out:
+ clk_disable(pd->clk);
+}
+
+static void activate_ch(struct sh_mobile_i2c_data *pd)
+{
+ /* Wake up device and enable clock */
+ pm_runtime_get_sync(pd->dev);
+ clk_enable(pd->clk);
/* Enable channel and configure rx ack */
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
@@ -246,8 +281,8 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
iic_wr(pd, ICIC, 0);
/* Set the clock */
- iic_wr(pd, ICCL, pd->iccl);
- iic_wr(pd, ICCH, pd->icch);
+ iic_wr(pd, ICCL, pd->iccl & 0xff);
+ iic_wr(pd, ICCH, pd->icch & 0xff);
}
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
@@ -434,6 +469,9 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
wake_up(&pd->wait);
}
+ /* defeat write posting to avoid spurious WAIT interrupts */
+ iic_rd(pd, ICSR);
+
return IRQ_HANDLED;
}
@@ -451,8 +489,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
/* Set the clock */
- iic_wr(pd, ICCL, pd->iccl);
- iic_wr(pd, ICCH, pd->icch);
+ iic_wr(pd, ICCL, pd->iccl & 0xff);
+ iic_wr(pd, ICCH, pd->icch & 0xff);
pd->msg = usr_msg;
pd->pos = -1;
@@ -621,10 +659,13 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_irq;
}
- /* Use platformd data bus speed or NORMAL_SPEED */
- pd->bus_speed = NORMAL_SPEED;
+ /* Use platform data bus speed or STANDARD_MODE */
+ pd->bus_speed = STANDARD_MODE;
if (pdata && pdata->bus_speed)
pd->bus_speed = pdata->bus_speed;
+ pd->clks_per_count = 1;
+ if (pdata && pdata->clks_per_count)
+ pd->clks_per_count = pdata->clks_per_count;
/* The IIC blocks on SH-Mobile ARM processors
* come with two new bits in ICIC.
@@ -632,6 +673,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
if (size > 0x17)
pd->flags |= IIC_FLAG_HAS_ICIC67;
+ sh_mobile_i2c_init(pd);
+
/* Enable Runtime PM for this device.
*
* Also tell the Runtime PM core to ignore children
@@ -667,8 +710,9 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_all;
}
- dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
- adap->nr, pd->bus_speed);
+ dev_info(&dev->dev,
+ "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
+ adap->nr, pd->bus_speed, pd->iccl, pd->icch);
of_i2c_register_devices(adap);
return 0;
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 566a675..3b7bc06 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -16,6 +16,8 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include <linux/of_i2c.h>
+#include <linux/of_gpio.h>
struct gpiomux {
struct i2c_adapter *parent;
@@ -57,29 +59,110 @@ static int __devinit match_gpio_chip_by_label(struct gpio_chip *chip,
return !strcmp(chip->label, data);
}
+#ifdef CONFIG_OF
+static int __devinit i2c_mux_gpio_probe_dt(struct gpiomux *mux,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *adapter_np, *child;
+ struct i2c_adapter *adapter;
+ unsigned *values, *gpios;
+ int i = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+ if (!adapter_np) {
+ dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
+ return -ENODEV;
+ }
+ adapter = of_find_i2c_adapter_by_node(adapter_np);
+ if (!adapter) {
+ dev_err(&pdev->dev, "Cannot find parent bus\n");
+ return -ENODEV;
+ }
+ mux->data.parent = i2c_adapter_id(adapter);
+ put_device(&adapter->dev);
+
+ mux->data.n_values = of_get_child_count(np);
+
+ values = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->data.values) * mux->data.n_values,
+ GFP_KERNEL);
+ if (!values) {
+ dev_err(&pdev->dev, "Cannot allocate values array");
+ return -ENOMEM;
+ }
+
+ for_each_child_of_node(np, child) {
+ of_property_read_u32(child, "reg", values + i);
+ i++;
+ }
+ mux->data.values = values;
+
+ if (of_property_read_u32(np, "idle-state", &mux->data.idle))
+ mux->data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+ mux->data.n_gpios = of_gpio_named_count(np, "mux-gpios");
+ if (mux->data.n_gpios < 0) {
+ dev_err(&pdev->dev, "Missing mux-gpios property in the DT.\n");
+ return -EINVAL;
+ }
+
+ gpios = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->data.gpios) * mux->data.n_gpios, GFP_KERNEL);
+ if (!gpios) {
+ dev_err(&pdev->dev, "Cannot allocate gpios array");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < mux->data.n_gpios; i++)
+ gpios[i] = of_get_named_gpio(np, "mux-gpios", i);
+
+ mux->data.gpios = gpios;
+
+ return 0;
+}
+#else
+static int __devinit i2c_mux_gpio_probe_dt(struct gpiomux *mux,
+ struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
{
struct gpiomux *mux;
- struct i2c_mux_gpio_platform_data *pdata;
struct i2c_adapter *parent;
int (*deselect) (struct i2c_adapter *, void *, u32);
unsigned initial_state, gpio_base;
int i, ret;
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "Missing platform data\n");
- return -ENODEV;
+ mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux) {
+ dev_err(&pdev->dev, "Cannot allocate gpiomux structure");
+ return -ENOMEM;
}
+ platform_set_drvdata(pdev, mux);
+
+ if (!pdev->dev.platform_data) {
+ ret = i2c_mux_gpio_probe_dt(mux, pdev);
+ if (ret < 0)
+ return ret;
+ } else
+ memcpy(&mux->data, pdev->dev.platform_data, sizeof(mux->data));
+
/*
* If a GPIO chip name is provided, the GPIO pin numbers provided are
* relative to its base GPIO number. Otherwise they are absolute.
*/
- if (pdata->gpio_chip) {
+ if (mux->data.gpio_chip) {
struct gpio_chip *gpio;
- gpio = gpiochip_find(pdata->gpio_chip,
+ gpio = gpiochip_find(mux->data.gpio_chip,
match_gpio_chip_by_label);
if (!gpio)
return -EPROBE_DEFER;
@@ -89,49 +172,44 @@ static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
gpio_base = 0;
}
- parent = i2c_get_adapter(pdata->parent);
+ parent = i2c_get_adapter(mux->data.parent);
if (!parent) {
dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
- pdata->parent);
+ mux->data.parent);
return -ENODEV;
}
- mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
- if (!mux) {
- ret = -ENOMEM;
- goto alloc_failed;
- }
-
mux->parent = parent;
- mux->data = *pdata;
mux->gpio_base = gpio_base;
+
mux->adap = devm_kzalloc(&pdev->dev,
- sizeof(*mux->adap) * pdata->n_values,
+ sizeof(*mux->adap) * mux->data.n_values,
GFP_KERNEL);
if (!mux->adap) {
+ dev_err(&pdev->dev, "Cannot allocate i2c_adapter structure");
ret = -ENOMEM;
goto alloc_failed;
}
- if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) {
- initial_state = pdata->idle;
+ if (mux->data.idle != I2C_MUX_GPIO_NO_IDLE) {
+ initial_state = mux->data.idle;
deselect = i2c_mux_gpio_deselect;
} else {
- initial_state = pdata->values[0];
+ initial_state = mux->data.values[0];
deselect = NULL;
}
- for (i = 0; i < pdata->n_gpios; i++) {
- ret = gpio_request(gpio_base + pdata->gpios[i], "i2c-mux-gpio");
+ for (i = 0; i < mux->data.n_gpios; i++) {
+ ret = gpio_request(gpio_base + mux->data.gpios[i], "i2c-mux-gpio");
if (ret)
goto err_request_gpio;
- gpio_direction_output(gpio_base + pdata->gpios[i],
+ gpio_direction_output(gpio_base + mux->data.gpios[i],
initial_state & (1 << i));
}
- for (i = 0; i < pdata->n_values; i++) {
- u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0;
- unsigned int class = pdata->classes ? pdata->classes[i] : 0;
+ for (i = 0; i < mux->data.n_values; i++) {
+ u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
+ unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr,
i, class,
@@ -144,19 +222,17 @@ static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
}
dev_info(&pdev->dev, "%d port mux on %s adapter\n",
- pdata->n_values, parent->name);
-
- platform_set_drvdata(pdev, mux);
+ mux->data.n_values, parent->name);
return 0;
add_adapter_failed:
for (; i > 0; i--)
i2c_del_mux_adapter(mux->adap[i - 1]);
- i = pdata->n_gpios;
+ i = mux->data.n_gpios;
err_request_gpio:
for (; i > 0; i--)
- gpio_free(gpio_base + pdata->gpios[i - 1]);
+ gpio_free(gpio_base + mux->data.gpios[i - 1]);
alloc_failed:
i2c_put_adapter(parent);
@@ -180,12 +256,19 @@ static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id i2c_mux_gpio_of_match[] __devinitconst = {
+ { .compatible = "i2c-mux-gpio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_gpio_of_match);
+
static struct platform_driver i2c_mux_gpio_driver = {
.probe = i2c_mux_gpio_probe,
.remove = __devexit_p(i2c_mux_gpio_remove),
.driver = {
.owner = THIS_MODULE,
.name = "i2c-mux-gpio",
+ .of_match_table = of_match_ptr(i2c_mux_gpio_of_match),
},
};
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 92a0dc7..babe0cf 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -20,8 +20,6 @@
#define OMAP_I2C_FLAG_NO_FIFO BIT(0)
#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1)
#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2)
-#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3)
-#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4)
#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5)
#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6)
/* how the CPU address bus must be translated for I2C unit access */
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
index beda7081..06e3089 100644
--- a/include/linux/i2c/i2c-sh_mobile.h
+++ b/include/linux/i2c/i2c-sh_mobile.h
@@ -5,6 +5,7 @@
struct i2c_sh_mobile_platform_data {
unsigned long bus_speed;
+ unsigned int clks_per_count;
};
#endif /* __I2C_SH_MOBILE_H__ */
diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h
new file mode 100644
index 0000000..6faa992
--- /dev/null
+++ b/include/linux/platform_data/i2c-cbus-gpio.h
@@ -0,0 +1,27 @@
+/*
+ * i2c-cbus-gpio.h - CBUS I2C platform_data definition
+ *
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Written by Felipe Balbi and Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+
+struct i2c_cbus_platform_data {
+ int dat_gpio;
+ int clk_gpio;
+ int sel_gpio;
+};
+
+#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */
OpenPOWER on IntegriCloud