summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBenoit Cousson <b-cousson@ti.com>2011-12-22 15:56:36 +0100
committerBen Dooks <ben-linux@fluff.org>2012-01-17 22:44:57 +0000
commit6145197be6cc0583fa1a2f4ec1079d366137061e (patch)
treeebade77ae1a25a56e822feed87c7135d01500083
parent78e1cf42ee3efd2c3e8af0b97cf0a0a570cc0c1f (diff)
downloadop-kernel-dev-6145197be6cc0583fa1a2f4ec1079d366137061e.zip
op-kernel-dev-6145197be6cc0583fa1a2f4ec1079d366137061e.tar.gz
i2c: OMAP: Add DT support for i2c controller
Add initial DT support to retrieve the frequency using a DT attribute instead of the pdata pointer if of_node exist. Add documentation for omap i2c controller binding. Based on original patches from Manju and Grant. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Ben Dooks <ben-linux@fluff.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@ti.com>
-rw-r--r--Documentation/devicetree/bindings/i2c/omap-i2c.txt30
-rw-r--r--drivers/i2c/busses/i2c-omap.c102
2 files changed, 97 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
new file mode 100644
index 0000000..56564aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
@@ -0,0 +1,30 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+ the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e0733b7..f713eac 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -37,6 +37,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
@@ -182,7 +185,9 @@ struct omap_i2c_dev {
u32 latency; /* maximum mpu wkup latency */
void (*set_mpu_wkup_lat)(struct device *dev,
long latency);
- u32 speed; /* Speed of bus in Khz */
+ u32 speed; /* Speed of bus in kHz */
+ u32 dtrev; /* extra revision from DT */
+ u32 flags;
u16 cmd_err;
u8 *buf;
u8 *regs;
@@ -266,11 +271,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
-
- if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+ if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
@@ -291,13 +292,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
- struct omap_i2c_bus_platform_data *pdata;
u16 iv;
- pdata = dev->dev->platform_data;
-
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
@@ -320,9 +318,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
unsigned long timeout;
unsigned long internal_clk = 0;
struct clk *fclk;
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
@@ -373,7 +368,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
+ if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
* The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420
@@ -397,7 +392,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
psc = fclk_rate / 12000000;
}
- if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
+ if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/*
* HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -406,7 +401,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
* The filter is iclk (fclk for HS) period.
*/
if (dev->speed > 400 ||
- pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
+ dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200;
else if (dev->speed > 100)
internal_clk = 9600;
@@ -475,7 +470,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
dev->errata = 0;
- if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+ if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
@@ -484,7 +479,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
- if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+ if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc;
dev->scllstate = scll;
dev->sclhstate = sclh;
@@ -804,9 +799,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 bits;
u16 stat, w;
int err, count = 0;
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
@@ -873,7 +865,7 @@ complete:
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (pdata->flags &
+ if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
*dev->buf++ = w >> 8;
@@ -916,7 +908,7 @@ complete:
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (pdata->flags &
+ if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
w |= *dev->buf++ << 8;
@@ -963,6 +955,32 @@ static const struct i2c_algorithm omap_i2c_algo = {
.functionality = omap_i2c_func,
};
+#ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap3_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap4_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_2,
+};
+
+static const struct of_device_id omap_i2c_of_match[] = {
+ {
+ .compatible = "ti,omap4-i2c",
+ .data = &omap4_pdata,
+ },
+ {
+ .compatible = "ti,omap3-i2c",
+ .data = &omap3_pdata,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
+#endif
+
static int __devinit
omap_i2c_probe(struct platform_device *pdev)
{
@@ -970,9 +988,10 @@ omap_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem, *irq, *ioarea;
struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *match;
irq_handler_t isr;
int r;
- u32 speed = 0;
/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -999,15 +1018,24 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
- if (pdata != NULL) {
- speed = pdata->clkrate;
+ match = of_match_device(omap_i2c_of_match, &pdev->dev);
+ if (match) {
+ u32 freq = 100000; /* default to 100000 Hz */
+
+ pdata = match->data;
+ dev->dtrev = pdata->rev;
+ dev->flags = pdata->flags;
+
+ of_property_read_u32(node, "clock-frequency", &freq);
+ /* convert DT freq value in Hz into kHz for speed */
+ dev->speed = freq / 1000;
+ } else if (pdata != NULL) {
+ dev->speed = pdata->clkrate;
+ dev->flags = pdata->flags;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
- } else {
- speed = 100; /* Default speed */
- dev->set_mpu_wkup_lat = NULL;
+ dev->dtrev = pdata->rev;
}
- dev->speed = speed;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
@@ -1018,9 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
+ dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
- if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
dev->regs = (u8 *)reg_map_ip_v2;
else
dev->regs = (u8 *)reg_map_ip_v1;
@@ -1033,7 +1061,7 @@ omap_i2c_probe(struct platform_device *pdev)
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
- if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
+ if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
/* Set up the fifo size - Get total size */
@@ -1056,7 +1084,7 @@ omap_i2c_probe(struct platform_device *pdev)
/* calculate wakeup latency constraint for MPU */
if (dev->set_mpu_wkup_lat != NULL)
dev->latency = (1000000 * dev->fifo_size) /
- (1000 * speed / 8);
+ (1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
@@ -1072,7 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
}
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
- pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+ dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
pm_runtime_put(dev->dev);
@@ -1083,6 +1111,7 @@ omap_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
/* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id;
@@ -1092,6 +1121,8 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
+ of_i2c_register_devices(adap);
+
return 0;
err_free_irq:
@@ -1164,6 +1195,7 @@ static struct platform_driver omap_i2c_driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
.pm = OMAP_I2C_PM_OPS,
+ .of_match_table = of_match_ptr(omap_i2c_of_match),
},
};
OpenPOWER on IntegriCloud