summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2008-04-14 12:17:10 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2008-04-24 21:16:53 -0700
commit58a97ffeb2297f154659f339d77eb3f32c4d8b3e (patch)
tree2ca171b7f720769007f9c9624b74ca4ad3442f02
parentb950bdbc67041412cb042e404938667204c7902c (diff)
downloadop-kernel-dev-58a97ffeb2297f154659f339d77eb3f32c4d8b3e.zip
op-kernel-dev-58a97ffeb2297f154659f339d77eb3f32c4d8b3e.tar.gz
USB: HCDs use the do_remote_wakeup flag
When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/core/driver.c1
-rw-r--r--drivers/usb/host/ehci-hub.c17
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/isp116x-hcd.c2
-rw-r--r--drivers/usb/host/ohci-hub.c5
-rw-r--r--drivers/usb/host/uhci-hcd.c21
6 files changed, 18 insertions, 30 deletions
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2ea333a..edc31e1 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -932,7 +932,6 @@ static int autosuspend_check(struct usb_device *udev, int reschedule)
* is disabled. Also fail if any interfaces require remote wakeup
* but it isn't available.
*/
- udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 21ac378..536b433 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -30,6 +30,8 @@
#ifdef CONFIG_PM
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
static int ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -149,10 +151,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
}
/* enable remote wakeup on all ports */
- if (device_may_wakeup(&hcd->self.root_hub->dev))
- t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
+ if (hcd->self.root_hub->do_remote_wakeup)
+ t2 |= PORT_WAKE_BITS;
else
- t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
+ t2 &= ~PORT_WAKE_BITS;
if (t1 != t2) {
ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
@@ -174,7 +176,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
/* allow remote wakeup */
mask = INTR_MASK;
- if (!device_may_wakeup(&hcd->self.root_hub->dev))
+ if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);
@@ -232,8 +234,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- temp &= ~(PORT_RWC_BITS
- | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
@@ -534,8 +535,6 @@ ehci_hub_descriptor (
/*-------------------------------------------------------------------------*/
-#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
-
static int ehci_hub_control (
struct usb_hcd *hcd,
u16 typeReq,
@@ -801,8 +800,6 @@ static int ehci_hub_control (
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
- if (device_may_wakeup(&hcd->self.root_hub->dev))
- temp |= PORT_WAKE_BITS;
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
break;
case USB_PORT_FEAT_POWER:
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a0afc78..88dad4b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -300,7 +300,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
int mask = INTR_MASK;
- if (!device_may_wakeup(&hcd->self.root_hub->dev))
+ if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 66d773c..20b9a0d 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1400,7 +1400,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd)
spin_unlock_irqrestore(&isp116x->lock, flags);
val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
val |= HCCONTROL_USB_SUSPEND;
- if (device_may_wakeup(&hcd->self.root_hub->dev))
+ if (hcd->self.root_hub->do_remote_wakeup)
val |= HCCONTROL_RWE;
/* Wait for usb transfers to finish */
msleep(2);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 28d6d77..cf3e1d2 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -103,10 +103,9 @@ __acquires(ohci->lock)
finish_unlinks (ohci, ohci_frame_no(ohci));
/* maybe resume can wake root hub */
- if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev) ||
- autostop)
+ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
ohci->hc_control |= OHCI_CTRL_RWE;
- else {
+ } else {
ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
ohci->hc_control &= ~OHCI_CTRL_RWE;
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index fec9872..f65d5a8 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -262,20 +262,12 @@ __acquires(uhci->lock)
{
int auto_stop;
int int_enable, egsm_enable;
+ struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
- dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "%s%s\n", __FUNCTION__,
+ dev_dbg(&rhdev->dev, "%s%s\n", __func__,
(auto_stop ? " (auto-stop)" : ""));
- /* If we get a suspend request when we're already auto-stopped
- * then there's nothing to do.
- */
- if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
- uhci->rh_state = new_state;
- return;
- }
-
/* Enable resume-detect interrupts if they work.
* Then enter Global Suspend mode if _it_ works, still configured.
*/
@@ -285,8 +277,10 @@ __acquires(uhci->lock)
if (remote_wakeup_is_broken(uhci))
egsm_enable = 0;
if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
- !device_may_wakeup(
- &uhci_to_hcd(uhci)->self.root_hub->dev))
+#ifdef CONFIG_PM
+ (!auto_stop && !rhdev->do_remote_wakeup) ||
+#endif
+ (auto_stop && !device_may_wakeup(&rhdev->dev)))
uhci->working_RD = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
@@ -308,8 +302,7 @@ __acquires(uhci->lock)
return;
}
if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
- dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "Controller not stopped yet!\n");
+ dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
uhci_get_current_frame_number(uhci);
OpenPOWER on IntegriCloud