summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMichael Hennerich <michael.hennerich@analog.com>2008-10-13 11:30:17 +0800
committerBryan Wu <cooloney@kernel.org>2008-10-13 11:30:17 +0800
commit46aa04f9b678d1d6f3558429109326775ca87715 (patch)
tree6f2b6b9a60513f51516b0c3ecf46486ce7914279
parent58c35bd31f8b577e03d904c214b55b3d91369a85 (diff)
downloadop-kernel-dev-46aa04f9b678d1d6f3558429109326775ca87715.zip
op-kernel-dev-46aa04f9b678d1d6f3558429109326775ca87715.tar.gz
Blackfin arch: AD7879 Touchscreen driver
Add AD7879 Touchscreen driver to the device structures Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c40
1 files changed, 37 insertions, 3 deletions
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ccfa088..dc5a308 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -51,7 +51,6 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -555,6 +554,7 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#include <linux/spi/ad7877.h>
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
@@ -575,6 +575,28 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#include <linux/spi/ad7879.h>
+static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+ .model = 7879, /* Model = AD7879 */
+ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
+ .pressure_max = 10000,
+ .pressure_min = 0,
+ .first_conversion_delay = 3, /* wait 512us before do a first conversion */
+ .acquisition_time = 1, /* 4us acquisition time per sample */
+ .median = 2, /* do 8 measurements */
+ .averaging = 1, /* take the average of 4 middle samples */
+ .pen_down_acc_interval = 255, /* 9.4 ms */
+ .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */
+ .gpio_default = 1, /* During initialization set GPIO = HIGH */
+};
+#endif
+
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = {
.enable_dma = 0,
@@ -728,6 +750,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+ {
+ .modalias = "ad7879",
+ .platform_data = &bfin_ad7879_ts_info,
+ .irq = IRQ_PF7,
+ .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spi_ad7879_chip_info,
+ .mode = SPI_CPHA | SPI_CPOL,
+ },
+#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
{
.modalias = "spidev",
@@ -742,7 +776,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 2,
.controller_data = &lq035q1_spi_chip_info,
.mode = SPI_CPHA | SPI_CPOL,
},
@@ -799,7 +833,7 @@ static struct platform_device bfin_fb_adv7393_device = {
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
- .use_bl = 1,
+ .use_bl = 0, /* let something else control the LCD Blacklight */
.gpio_bl = GPIO_PF7,
};
OpenPOWER on IntegriCloud