summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2012-01-19 12:16:36 +1000
committerPaul Mundt <lethal@linux-sh.org>2012-01-19 12:16:36 +1000
commit446e326c15c3b45da87b6d883e1c981df035b2ac (patch)
tree94d43260cdf9da14cc4d5484ff5f05a388174295
parentd5bb386d70c8e8e79c7f652a794610e01d79f33e (diff)
parent6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f (diff)
downloadop-kernel-dev-446e326c15c3b45da87b6d883e1c981df035b2ac.zip
op-kernel-dev-446e326c15c3b45da87b6d883e1c981df035b2ac.tar.gz
Merge branch 'rmobile/mackerel' into rmobile-fixes-for-linus
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c83
1 files changed, 19 insertions, 64 deletions
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 1a955e2..a281324 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
@@ -145,11 +144,6 @@
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD Host
- * CONFIG_USB_RENESAS_USBHS Function
- *
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
*/
/*
@@ -208,6 +193,16 @@
*/
/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
* FIXME !!
*
* gpio_no_direction
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ * - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ * - J30 "open"
+ * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ * - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
- if (!power) /* only power-on is supported for now */
- return;
-
- /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
- .on_chip = 1,
- .port_power = usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
- },
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
static int usbhs1_get_id(struct platform_device *pdev)
{
- return USBHS_GADGET;
+ return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
- .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@@ -1303,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
@@ -1465,9 +1423,6 @@ static void __init mackerel_init(void)
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
- /* USB phy tweak to make the r8a66597_hcd host driver work */
- __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
-
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
OpenPOWER on IntegriCloud