summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlex Chiang <achiang@hp.com>2009-03-31 09:23:16 -0600
committerJesse Barnes <jbarnes@virtuousgeek.org>2009-06-11 12:04:08 -0700
commit427438c61b0083a60bb953cb36cfdc5841f0bb03 (patch)
tree4583b0f23eed091006324bc1f3f61ed7fcd8a7ac
parent861fefbf550d41e7a4f44584f3ec35977fa08bf1 (diff)
downloadop-kernel-dev-427438c61b0083a60bb953cb36cfdc5841f0bb03.zip
op-kernel-dev-427438c61b0083a60bb953cb36cfdc5841f0bb03.tar.gz
PCI Hotplug: cpqphp: fix comment style
Fix up comments from C++ to C-style, wrapping if necessary, etc. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-rw-r--r--drivers/pci/hotplug/cpqphp.h22
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c157
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c131
-rw-r--r--drivers/pci/hotplug/cpqphp_nvram.c79
-rw-r--r--drivers/pci/hotplug/cpqphp_pci.c313
5 files changed, 387 insertions, 315 deletions
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index b627dfd..e15d657 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -190,7 +190,9 @@ struct hrt {
u32 reserved2;
} __attribute__ ((packed));
-/* offsets to the hotplug resource table registers based on the above structure layout */
+/* offsets to the hotplug resource table registers based on the above
+ * structure layout
+ */
enum hrt_offsets {
SIG0 = offsetof(struct hrt, sig0),
SIG1 = offsetof(struct hrt, sig1),
@@ -217,7 +219,9 @@ struct slot_rt {
u16 pre_mem_length;
} __attribute__ ((packed));
-/* offsets to the hotplug slot resource table registers based on the above structure layout */
+/* offsets to the hotplug slot resource table registers based on the above
+ * structure layout
+ */
enum slot_rt_offsets {
DEV_FUNC = offsetof(struct slot_rt, dev_func),
PRIMARY_BUS = offsetof(struct slot_rt, primary_bus),
@@ -286,8 +290,8 @@ struct event_info {
struct controller {
struct controller *next;
u32 ctrl_int_comp;
- struct mutex crit_sect; /* critical section mutex */
- void __iomem *hpc_reg; /* cookie for our pci controller location */
+ struct mutex crit_sect; /* critical section mutex */
+ void __iomem *hpc_reg; /* cookie for our pci controller location */
struct pci_resource *mem_head;
struct pci_resource *p_mem_head;
struct pci_resource *io_head;
@@ -299,7 +303,7 @@ struct controller {
u8 next_event;
u8 interrupt;
u8 cfgspc_irq;
- u8 bus; /* bus number for the pci hotplug controller */
+ u8 bus; /* bus number for the pci hotplug controller */
u8 rev;
u8 slot_device_offset;
u8 first_slot;
@@ -458,7 +462,6 @@ static inline char *slot_name(struct slot *slot)
* return_resource
*
* Puts node back in the resource list pointed to by head
- *
*/
static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
{
@@ -575,13 +578,12 @@ static inline u8 read_slot_enable(struct controller *ctrl)
}
-/*
+/**
* get_controller_speed - find the current frequency/mode of controller.
*
* @ctrl: controller to get frequency/mode for.
*
* Returns controller speed.
- *
*/
static inline u8 get_controller_speed(struct controller *ctrl)
{
@@ -607,14 +609,13 @@ static inline u8 get_controller_speed(struct controller *ctrl)
}
-/*
+/**
* get_adapter_speed - find the max supported frequency/mode of adapter.
*
* @ctrl: hotplug controller.
* @hp_slot: hotplug slot where adapter is installed.
*
* Returns adapter speed.
- *
*/
static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot)
{
@@ -719,4 +720,3 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl)
}
#endif
-
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 55eae4c..91dc958 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -26,7 +26,6 @@
*
* Jan 12, 2003 - Added 66/100/133MHz PCI-X support,
* Torben Mathiasen <torben.mathiasen@hp.com>
- *
*/
#include <linux/module.h>
@@ -171,7 +170,7 @@ static int init_SERR(struct controller * ctrl)
tempdword = ctrl->first_slot;
number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- // Loop through slots
+ /* Loop through slots */
while (number_of_slots) {
physical_slot = tempdword;
writeb(0, ctrl->hpc_reg + SLOT_SERR);
@@ -200,7 +199,7 @@ static int pci_print_IRQ_route (void)
len = (routing_table->size - sizeof(struct irq_routing_table)) /
sizeof(struct irq_info);
- // Make sure I got at least one entry
+ /* Make sure I got at least one entry */
if (len == 0) {
kfree(routing_table);
return -1;
@@ -244,7 +243,7 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
if (!smbios_table || !curr)
return(NULL);
- // set p_max to the end of the table
+ /* set p_max to the end of the table */
p_max = smbios_start + readw(smbios_table + ST_LENGTH);
p_temp = curr;
@@ -253,7 +252,8 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
while ((p_temp < p_max) && !bail) {
/* Look for the double NULL terminator
* The first condition is the previous byte
- * and the second is the curr */
+ * and the second is the curr
+ */
if (!previous_byte && !(readb(p_temp))) {
bail = 1;
}
@@ -387,8 +387,9 @@ static int ctrl_slot_setup(struct controller *ctrl,
slot->task_event.expires = jiffies + 5 * HZ;
slot->task_event.function = cpqhp_pushbutton_thread;
- //FIXME: these capabilities aren't used but if they are
- // they need to be correctly implemented
+ /*FIXME: these capabilities aren't used but if they are
+ * they need to be correctly implemented
+ */
slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
@@ -402,14 +403,14 @@ static int ctrl_slot_setup(struct controller *ctrl,
ctrl_slot =
slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
- // Check presence
+ /* Check presence */
slot->capabilities |=
((((~tempdword) >> 23) |
((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
- // Check the switch state
+ /* Check the switch state */
slot->capabilities |=
((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
- // Check the slot enable
+ /* Check the slot enable */
slot->capabilities |=
((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
@@ -476,11 +477,11 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
cpqhp_remove_debugfs_files(ctrl);
- //Free IRQ associated with hot plug device
+ /* Free IRQ associated with hot plug device */
free_irq(ctrl->interrupt, ctrl);
- //Unmap the memory
+ /* Unmap the memory */
iounmap(ctrl->hpc_reg);
- //Finally reclaim PCI mem
+ /* Finally reclaim PCI mem */
release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
pci_resource_len(ctrl->pci_dev, 0));
@@ -488,20 +489,17 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
}
-//============================================================================
-// function: get_slot_mapping
-//
-// Description: Attempts to determine a logical slot mapping for a PCI
-// device. Won't work for more than one PCI-PCI bridge
-// in a slot.
-//
-// Input: u8 bus_num - bus number of PCI device
-// u8 dev_num - device number of PCI device
-// u8 *slot - Pointer to u8 where slot number will
-// be returned
-//
-// Output: SUCCESS or FAILURE
-//=============================================================================
+/**
+ * get_slot_mapping - determine logical slot mapping for PCI device
+ *
+ * Won't work for more than one PCI-PCI bridge in a slot.
+ *
+ * @bus_num - bus number of PCI device
+ * @dev_num - device number of PCI device
+ * @slot - Pointer to u8 where slot number will be returned
+ *
+ * Output: SUCCESS or FAILURE
+ */
static int
get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
{
@@ -522,7 +520,7 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
len = (PCIIRQRoutingInfoLength->size -
sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- // Make sure I got at least one entry
+ /* Make sure I got at least one entry */
if (len == 0) {
kfree(PCIIRQRoutingInfoLength);
return -1;
@@ -539,13 +537,14 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
return 0;
} else {
/* Did not get a match on the target PCI device. Check
- * if the current IRQ table entry is a PCI-to-PCI bridge
- * device. If so, and it's secondary bus matches the
- * bus number for the target device, I need to save the
- * bridge's slot number. If I can not find an entry for
- * the target device, I will have to assume it's on the
- * other side of the bridge, and assign it the bridge's
- * slot. */
+ * if the current IRQ table entry is a PCI-to-PCI
+ * bridge device. If so, and it's secondary bus
+ * matches the bus number for the target device, I need
+ * to save the bridge's slot number. If I can not find
+ * an entry for the target device, I will have to
+ * assume it's on the other side of the bridge, and
+ * assign it the bridge's slot.
+ */
bus->number = tbus;
pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
PCI_CLASS_REVISION, &work);
@@ -563,17 +562,18 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
}
- // If we got here, we didn't find an entry in the IRQ mapping table
- // for the target PCI device. If we did determine that the target
- // device is on the other side of a PCI-to-PCI bridge, return the
- // slot number for the bridge.
+ /* If we got here, we didn't find an entry in the IRQ mapping table for
+ * the target PCI device. If we did determine that the target device
+ * is on the other side of a PCI-to-PCI bridge, return the slot number
+ * for the bridge.
+ */
if (bridgeSlot != 0xFF) {
*slot = bridgeSlot;
kfree(PCIIRQRoutingInfoLength);
return 0;
}
kfree(PCIIRQRoutingInfoLength);
- // Couldn't find an entry in the routing table for this PCI device
+ /* Couldn't find an entry in the routing table for this PCI device */
return -1;
}
@@ -595,7 +595,7 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
hp_slot = func->device - ctrl->slot_device_offset;
- // Wait for exclusive access to hardware
+ /* Wait for exclusive access to hardware */
mutex_lock(&ctrl->crit_sect);
if (status == 1) {
@@ -603,17 +603,17 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
} else if (status == 0) {
amber_LED_off (ctrl, hp_slot);
} else {
- // Done with exclusive hardware access
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
return(1);
}
set_SOGO(ctrl);
- // Wait for SOBS to be unset
+ /* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
- // Done with exclusive hardware access
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
return(0);
@@ -815,7 +815,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return err;
}
- // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
+ /* Need to read VID early b/c it's used to differentiate CPQ and INTC
+ * discovery
+ */
rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
err(msg_HPC_non_compaq_or_intel);
@@ -837,7 +839,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* Also Intel HPC's may have RID=0.
*/
if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
- // TODO: This code can be made to support non-Compaq or Intel subsystem IDs
+ /* TODO: This code can be made to support non-Compaq or Intel
+ * subsystem IDs
+ */
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
err("%s : pci_read_config_word failed\n", __func__);
@@ -865,7 +869,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
- /* Set Vendor ID, so it can be accessed later from other functions */
+ /* Set Vendor ID, so it can be accessed later from other
+ * functions
+ */
ctrl->vendor_id = vendor_id;
switch (subsystem_vid) {
@@ -992,23 +998,23 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* PHP Status (0=De-feature PHP, 1=Normal operation) */
if (subsystem_deviceid & 0x0008) {
- ctrl->defeature_PHP = 1; // PHP supported
+ ctrl->defeature_PHP = 1; /* PHP supported */
} else {
- ctrl->defeature_PHP = 0; // PHP not supported
+ ctrl->defeature_PHP = 0; /* PHP not supported */
}
/* Alternate Base Address Register Interface (0=not supported, 1=supported) */
if (subsystem_deviceid & 0x0010) {
- ctrl->alternate_base_address = 1; // supported
+ ctrl->alternate_base_address = 1; /* supported */
} else {
- ctrl->alternate_base_address = 0; // not supported
+ ctrl->alternate_base_address = 0; /* not supported */
}
/* PCI Config Space Index (0=not supported, 1=supported) */
if (subsystem_deviceid & 0x0020) {
- ctrl->pci_config_space = 1; // supported
+ ctrl->pci_config_space = 1; /* supported */
} else {
- ctrl->pci_config_space = 0; // not supported
+ ctrl->pci_config_space = 0; /* not supported */
}
/* PCI-X support */
@@ -1042,7 +1048,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
- // Tell the user that we found one.
+ /* Tell the user that we found one. */
info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
pdev->bus->number);
@@ -1120,7 +1126,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
*
********************************************************/
- // find the physical slot number of the first hot plug slot
+ /* find the physical slot number of the first hot plug slot */
/* Get slot won't work for devices behind bridges, but
* in this case it will always be called for the "base"
@@ -1137,7 +1143,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_iounmap;
}
- // Store PCI Config Space for all devices on this bus
+ /* Store PCI Config Space for all devices on this bus */
rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
if (rc) {
err("%s: unable to save PCI configuration data, error %d\n",
@@ -1148,7 +1154,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/*
* Get IO, memory, and IRQ resources for new devices
*/
- // The next line is required for cpqhp_find_available_resources
+ /* The next line is required for cpqhp_find_available_resources */
ctrl->interrupt = pdev->irq;
if (ctrl->interrupt < 0x10) {
cpqhp_legacy_mode = 1;
@@ -1196,12 +1202,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_iounmap;
}
- /* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
+ /* Enable Shift Out interrupt and clear it, also enable SERR on power
+ * fault
+ */
temp_word = readw(ctrl->hpc_reg + MISC);
temp_word |= 0x4006;
writew(temp_word, ctrl->hpc_reg + MISC);
- // Changed 05/05/97 to clear all interrupts at start
+ /* Changed 05/05/97 to clear all interrupts at start */
writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
@@ -1216,13 +1224,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
cpqhp_ctrl_list = ctrl;
}
- // turn off empty slots here unless command line option "ON" set
- // Wait for exclusive access to hardware
+ /* turn off empty slots here unless command line option "ON" set
+ * Wait for exclusive access to hardware
+ */
mutex_lock(&ctrl->crit_sect);
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- // find first device number for the ctrl
+ /* find first device number for the ctrl */
device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
while (num_of_slots) {
@@ -1234,7 +1243,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hp_slot = func->device - ctrl->slot_device_offset;
dbg("hp_slot: %d\n", hp_slot);
- // We have to save the presence info for these slots
+ /* We have to save the presence info for these slots */
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -1258,7 +1267,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!power_mode) {
set_SOGO(ctrl);
- // Wait for SOBS to be unset
+ /* Wait for SOBS to be unset */
wait_for_ctrl_irq(ctrl);
}
@@ -1269,7 +1278,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_free_irq;
}
- // Done with exclusive hardware access
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
cpqhp_create_debugfs_files(ctrl);
@@ -1316,11 +1325,11 @@ static int one_time_init(void)
cpqhp_slot_list[loop] = NULL;
}
- // FIXME: We also need to hook the NMI handler eventually.
- // this also needs to be worked with Christoph
- // register_NMI_handler();
-
- // Map rom address
+ /* FIXME: We also need to hook the NMI handler eventually.
+ * this also needs to be worked with Christoph
+ * register_NMI_handler();
+ */
+ /* Map rom address */
cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
if (!cpqhp_rom_start) {
err ("Could not ioremap memory region for ROM\n");
@@ -1328,7 +1337,9 @@ static int one_time_init(void)
goto error;
}
- /* Now, map the int15 entry point if we are on compaq specific hardware */
+ /* Now, map the int15 entry point if we are on compaq specific
+ * hardware
+ */
compaq_nvram_init(cpqhp_rom_start);
/* Map smbios table entry point structure */
@@ -1462,11 +1473,11 @@ static void __exit unload_cpqphpd(void)
}
}
- // Stop the notification mechanism
+ /* Stop the notification mechanism */
if (initialized)
cpqhp_event_stop_thread();
- //unmap the rom address
+ /* unmap the rom address */
if (cpqhp_rom_start)
iounmap(cpqhp_rom_start);
if (smbios_start)
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index ec3a765..b02b8dd 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x1L << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
/* this is the structure that tells the worker thread
- *what to do */
+ * what to do
+ */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
@@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
- /**********************************
+ /*
* Switch opened
- **********************************/
+ */
func->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
- /**********************************
+ /*
* Switch closed
- **********************************/
+ */
func->switch_save = 0x10;
@@ -152,17 +153,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
if (!change)
return 0;
- /**********************************
+ /*
* Presence Change
- **********************************/
+ */
dbg("cpqsbd: Presence/Notify input change.\n");
dbg(" Changed bits are 0x%4.4x\n", change );
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x0101 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -177,22 +178,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
return 0;
/* If the switch closed, must be a button
- * If not in button mode, nevermind */
+ * If not in button mode, nevermind
+ */
if (func->switch_save && (ctrl->push_button == 1)) {
temp_word = ctrl->ctrl_int_comp >> 16;
temp_byte = (temp_word >> hp_slot) & 0x01;
temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
if (temp_byte != func->presence_save) {
- /**************************************
+ /*
* button Pressed (doesn't do anything)
- **************************************/
+ */
dbg("hp_slot %d button pressed\n", hp_slot);
taskInfo->event_type = INT_BUTTON_PRESS;
} else {
- /**********************************
+ /*
* button Released - TAKE ACTION!!!!
- **********************************/
+ */
dbg("hp_slot %d button released\n", hp_slot);
taskInfo->event_type = INT_BUTTON_RELEASE;
@@ -210,7 +212,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
}
} else {
/* Switch is open, assume a presence change
- * Save the presence state */
+ * Save the presence state
+ */
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -241,17 +244,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
if (!change)
return 0;
- /**********************************
+ /*
* power fault
- **********************************/
+ */
info("power fault interrupt\n");
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x01 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -262,16 +265,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
rc++;
if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
- /**********************************
+ /*
* power fault Cleared
- **********************************/
+ */
func->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
- /**********************************
+ /*
* power fault
- **********************************/
+ */
taskInfo->event_type = INT_POWER_FAULT;
if (ctrl->rev < 4) {
@@ -432,13 +435,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h
/* If we got here, there the bridge requires some of the resource, but
- * we may be able to split some off of the front */
+ * we may be able to split some off of the front
+ */
node = *head;
if (node->length & (alignment -1)) {
/* this one isn't an aligned length, so we'll make a new entry
- * and split it up. */
+ * and split it up.
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -556,7 +561,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
if (node->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -581,7 +587,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
/* Don't need to check if too small since we already did */
if (node->length > size) {
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -601,7 +608,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
continue;
/* If we got here, then it is the right size
- * Now take it out of the list and break */
+ * Now take it out of the list and break
+ */
if (*head == node) {
*head = node->next;
} else {
@@ -643,13 +651,15 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
for (max = *head; max; max = max->next) {
/* If not big enough we could probably just bail,
- * instead we'll continue to the next. */
+ * instead we'll continue to the next.
+ */
if (max->length < size)
continue;
if (max->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (max->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -672,7 +682,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
if ((max->base + max->length) & (size - 1)) {
/* this one isn't end aligned properly at the top
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -744,7 +755,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
if (node->base & (size - 1)) {
dbg("%s: not aligned\n", __func__);
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -769,7 +781,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
if (node->length > size) {
dbg("%s: too big\n", __func__);
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -888,17 +901,17 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
misc = readw(ctrl->hpc_reg + MISC);
- /***************************************
+ /*
* Check to see if it was our interrupt
- ***************************************/
+ */
if (!(misc & 0x000C)) {
return IRQ_NONE;
}
if (misc & 0x0004) {
- /**********************************
+ /*
* Serial Output interrupt Pending
- **********************************/
+ */
/* Clear the interrupt */
misc |= 0x0004;
@@ -963,7 +976,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber)
new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
if (new_slot == NULL) {
/* I'm not dead yet!
- * You will be. */
+ * You will be.
+ */
return new_slot;
}
@@ -1135,7 +1149,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
return 0;
/* We don't allow freq/mode changes if we find another adapter running
- * in another slot on this controller */
+ * in another slot on this controller
+ */
for(slot = ctrl->slot; slot; slot = slot->next) {
if (slot->device == (hp_slot + ctrl->slot_device_offset))
continue;
@@ -1145,7 +1160,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
continue;
/* If another adapter is running on the same segment but at a
* lower speed/mode, we allow the new adapter to function at
- * this rate if supported */
+ * this rate if supported
+ */
if (ctrl->speed < adapter_speed)
return 0;
@@ -1153,7 +1169,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
}
/* If the controller doesn't support freq/mode changes and the
- * controller is running at a higher mode, we bail */
+ * controller is running at a higher mode, we bail
+ */
if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
@@ -1162,7 +1179,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
return 0;
/* We try to set the max speed supported by both the adapter and
- * controller */
+ * controller
+ */
if (ctrl->speed_capability < adapter_speed) {
if (ctrl->speed == ctrl->speed_capability)
return 0;
@@ -1244,7 +1262,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
}
/* the following routines constitute the bulk of the
- hotplug controller logic
+ * hotplug controller logic
*/
@@ -1269,14 +1287,14 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
hp_slot = func->device - ctrl->slot_device_offset;
if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
- /**********************************
+ /*
* The switch is open.
- **********************************/
+ */
rc = INTERLOCK_OPEN;
} else if (is_slot_enabled (ctrl, hp_slot)) {
- /**********************************
+ /*
* The board is already on
- **********************************/
+ */
rc = CARD_FUNCTIONING;
} else {
mutex_lock(&ctrl->crit_sect);
@@ -1352,7 +1370,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
* Get slot won't work for devices behind
* bridges, but in this case it will always be
* called for the "base" bus/dev/func of an
- * adapter. */
+ * adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1377,7 +1396,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
* Get slot won't work for devices behind bridges, but
* in this case it will always be called for the "base"
- * bus/dev/func of an adapter. */
+ * bus/dev/func of an adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1434,7 +1454,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
wait_for_ctrl_irq (ctrl);
/* Change bits in slot power register to force another shift out
- * NOTE: this is to work around the timer bug */
+ * NOTE: this is to work around the timer bug
+ */
temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
@@ -2484,7 +2505,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
temp_resources.irqs = &irqs;
/* Make copies of the nodes we are going to pass down so that
- * if there is a problem,we can just use these to free resources */
+ * if there is a problem,we can just use these to free resources
+ */
hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
@@ -2556,7 +2578,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
- /* Adjust this to compensate for extra adjustment in first loop */
+ /* Adjust this to compensate for extra adjustment in first loop
+ */
irqs.barber_pole--;
rc = 0;
diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c
index 76e110f..76ba8a1 100644
--- a/drivers/pci/hotplug/cpqphp_nvram.c
+++ b/drivers/pci/hotplug/cpqphp_nvram.c
@@ -94,12 +94,13 @@ static u8 evbuffer[1024];
static void __iomem *compaq_int15_entry_point;
-static spinlock_t int15_lock; /* lock for ordering int15_bios_call() */
+/* lock for ordering int15_bios_call() */
+static spinlock_t int15_lock;
/* This is a series of function that deals with
- setting & getting the hotplug resource table in some environment variable.
-*/
+ * setting & getting the hotplug resource table in some environment variable.
+ */
/*
* We really shouldn't be doing this unless there is a _very_ good reason to!!!
@@ -210,14 +211,16 @@ static int load_HRT (void __iomem *rom_start)
available = 1024;
- // Now load the EV
+ /* Now load the EV */
temp_dword = available;
rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword);
evbuffer_length = temp_dword;
- // We're maintaining the resource lists so write FF to invalidate old info
+ /* We're maintaining the resource lists so write FF to invalidate old
+ * info
+ */
temp_dword = 1;
rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword);
@@ -264,12 +267,12 @@ static u32 store_HRT (void __iomem *rom_start)
ctrl = cpqhp_ctrl_list;
- // The revision of this structure
+ /* The revision of this structure */
rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available);
if (rc)
return(rc);
- // The number of controllers
+ /* The number of controllers */
rc = add_byte( &pFill, 1, &usedbytes, &available);
if (rc)
return(rc);
@@ -279,27 +282,27 @@ static u32 store_HRT (void __iomem *rom_start)
numCtrl++;
- // The bus number
+ /* The bus number */
rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available);
if (rc)
return(rc);
- // The device Number
+ /* The device Number */
rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
- // The function Number
+ /* The function Number */
rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
- // Skip the number of available entries
+ /* Skip the number of available entries */
rc = add_dword( &pFill, 0, &usedbytes, &available);
if (rc)
return(rc);
- // Figure out memory Available
+ /* Figure out memory Available */
resNode = ctrl->mem_head;
@@ -308,12 +311,12 @@ static u32 store_HRT (void __iomem *rom_start)
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -321,10 +324,10 @@ static u32 store_HRT (void __iomem *rom_start)
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->mem_avail = loop;
- // Figure out prefetchable memory Available
+ /* Figure out prefetchable memory Available */
resNode = ctrl->p_mem_head;
@@ -333,12 +336,12 @@ static u32 store_HRT (void __iomem *rom_start)
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -346,10 +349,10 @@ static u32 store_HRT (void __iomem *rom_start)
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->p_mem_avail = loop;
- // Figure out IO Available
+ /* Figure out IO Available */
resNode = ctrl->io_head;
@@ -358,12 +361,12 @@ static u32 store_HRT (void __iomem *rom_start)
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -371,10 +374,10 @@ static u32 store_HRT (void __iomem *rom_start)
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->io_avail = loop;
- // Figure out bus Available
+ /* Figure out bus Available */
resNode = ctrl->bus_head;
@@ -383,12 +386,12 @@ static u32 store_HRT (void __iomem *rom_start)
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -396,7 +399,7 @@ static u32 store_HRT (void __iomem *rom_start)
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->bus_avail = loop;
ctrl = ctrl->next;
@@ -404,7 +407,7 @@ static u32 store_HRT (void __iomem *rom_start)
p_EV_header->num_of_ctrl = numCtrl;
- // Now store the EV
+ /* Now store the EV */
temp_dword = usedbytes;
@@ -449,20 +452,21 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
struct ev_hrt_header *p_EV_header;
if (!evbuffer_init) {
- // Read the resource list information in from NVRAM
+ /* Read the resource list information in from NVRAM */
if (load_HRT(rom_start))
memset (evbuffer, 0, 1024);
evbuffer_init = 1;
}
- // If we saved information in NVRAM, use it now
+ /* If we saved information in NVRAM, use it now */
p_EV_header = (struct ev_hrt_header *) evbuffer;
- // The following code is for systems where version 1.0 of this
- // driver has been loaded, but doesn't support the hardware.
- // In that case, the driver would incorrectly store something
- // in NVRAM.
+ /* The following code is for systems where version 1.0 of this
+ * driver has been loaded, but doesn't support the hardware.
+ * In that case, the driver would incorrectly store something
+ * in NVRAM.
+ */
if ((p_EV_header->Version == 2) ||
((p_EV_header->Version == 1) && !ctrl->push_flag)) {
p_byte = &(p_EV_header->next);
@@ -491,7 +495,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
if (p_byte > ((u8*)p_EV_header + evbuffer_length))
return 2;
- // Skip forward to the next entry
+ /* Skip forward to the next entry */
p_byte += (nummem + numpmem + numio + numbus) * 8;
if (p_byte > ((u8*)p_EV_header + evbuffer_length))
@@ -629,8 +633,9 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
ctrl->bus_head = bus_node;
}
- // If all of the following fail, we don't have any resources for
- // hot plug add
+ /* If all of the following fail, we don't have any resources for
+ * hot plug add
+ */
rc = 1;
rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 573a270..2e96bae 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -178,17 +178,17 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
if (!rc)
return !rc;
- // set the Edge Level Control Register (ELCR)
+ /* set the Edge Level Control Register (ELCR) */
temp_word = inb(0x4d0);
temp_word |= inb(0x4d1) << 8;
temp_word |= 0x01 << irq_num;
- // This should only be for x86 as it sets the Edge Level Control Register
- outb((u8) (temp_word & 0xFF), 0x4d0);
- outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
- rc = 0;
- }
+ /* This should only be for x86 as it sets the Edge Level
+ * Control Register
+ */
+ outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
+ 0xFF00) >> 8), 0x4d1); rc = 0; }
return rc;
}
@@ -213,11 +213,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
ctrl->pci_bus->number = bus_num;
for (tdevice = 0; tdevice < 0xFF; tdevice++) {
- //Scan for access first
+ /* Scan for access first */
if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
continue;
dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
- //Yep we got one. Not a bridge ?
+ /* Yep we got one. Not a bridge ? */
if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
*dev_num = tdevice;
dbg("found it !\n");
@@ -225,11 +225,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
}
}
for (tdevice = 0; tdevice < 0xFF; tdevice++) {
- //Scan for access first
+ /* Scan for access first */
if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
continue;
dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
- //Yep we got one. bridge ?
+ /* Yep we got one. bridge ? */
if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
@@ -257,7 +257,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
len = (PCIIRQRoutingInfoLength->size -
sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- // Make sure I got at least one entry
+ /* Make sure I got at least one entry */
if (len == 0) {
kfree(PCIIRQRoutingInfoLength );
return -1;
@@ -304,11 +304,14 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
{
- return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed)
+ /* plain (bridges allowed) */
+ return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
}
-/* More PCI configuration routines; this time centered around hotplug controller */
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
/*
@@ -339,12 +342,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
int stop_it;
int index;
- // Decide which slots are supported
+ /* Decide which slots are supported */
if (is_hot_plug) {
- //*********************************
- // is_hot_plug is the slot mask
- //*********************************
+ /*
+ * is_hot_plug is the slot mask
+ */
FirstSupported = is_hot_plug >> 4;
LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
} else {
@@ -352,13 +355,13 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
LastSupported = 0x1F;
}
- // Save PCI configuration space for all devices in supported slots
+ /* Save PCI configuration space for all devices in supported slots */
ctrl->pci_bus->number = busnumber;
for (device = FirstSupported; device <= LastSupported; device++) {
ID = 0xFFFFFFFF;
rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
- if (ID != 0xFFFFFFFF) { // device in slot
+ if (ID != 0xFFFFFFFF) { /* device in slot */
rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
if (rc)
return rc;
@@ -367,7 +370,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
if (rc)
return rc;
- // If multi-function device, set max_functions to 8
+ /* If multi-function device, set max_functions to 8 */
if (header_type & 0x80)
max_functions = 8;
else
@@ -377,18 +380,19 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
do {
DevError = 0;
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge
- // Recurse the subordinate bus
- // get the subordinate bus number
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus
+ * get the subordinate bus number
+ */
rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
if (rc) {
return rc;
} else {
sub_bus = (int) secondary_bus;
- // Save secondary bus cfg spc
- // with this recursive call.
+ /* Save secondary bus cfg spc
+ * with this recursive call.
+ */
rc = cpqhp_save_config(ctrl, sub_bus, 0);
if (rc)
return rc;
@@ -403,7 +407,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
new_slot = cpqhp_slot_find(busnumber, device, index++);
if (!new_slot) {
- // Setup slot structure.
+ /* Setup slot structure. */
new_slot = cpqhp_slot_create(busnumber);
if (new_slot == NULL)
@@ -415,7 +419,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
new_slot->function = (u8) function;
new_slot->is_a_board = 1;
new_slot->switch_save = 0x10;
- // In case of unsupported board
+ /* In case of unsupported board */
new_slot->status = DevError;
new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
@@ -429,14 +433,15 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
stop_it = 0;
- // this loop skips to the next present function
- // reading in Class Code and Header type.
+ /* this loop skips to the next present function
+ * reading in Class Code and Header type.
+ */
while ((function < max_functions)&&(!stop_it)) {
rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
- if (ID == 0xFFFFFFFF) { // nothing there.
+ if (ID == 0xFFFFFFFF) { /* nothing there. */
function++;
- } else { // Something there
+ } else { /* Something there */
rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
if (rc)
return rc;
@@ -450,9 +455,9 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
}
} while (function < max_functions);
- } // End of IF (device in slot?)
+ } /* End of IF (device in slot?) */
else if (is_hot_plug) {
- // Setup slot structure with entry for empty slot
+ /* Setup slot structure with entry for empty slot */
new_slot = cpqhp_slot_create(busnumber);
if (new_slot == NULL) {
@@ -466,7 +471,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
new_slot->presence_save = 0;
new_slot->switch_save = 0;
}
- } // End of FOR loop
+ } /* End of FOR loop */
return(0);
}
@@ -498,11 +503,11 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
ctrl->pci_bus->number = new_slot->bus;
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
- if (ID != 0xFFFFFFFF) { // device in slot
+ if (ID != 0xFFFFFFFF) { /* device in slot */
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
- if (header_type & 0x80) // Multi-function device
+ if (header_type & 0x80) /* Multi-function device */
max_functions = 8;
else
max_functions = 1;
@@ -510,19 +515,21 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
function = 0;
do {
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // Recurse the subordinate bus
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus */
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
- // Save the config headers for the secondary bus.
+ /* Save the config headers for the secondary
+ * bus.
+ */
rc = cpqhp_save_config(ctrl, sub_bus, 0);
if (rc)
return(rc);
ctrl->pci_bus->number = new_slot->bus;
- } // End of IF
+ } /* End of IF */
new_slot->status = 0;
@@ -534,15 +541,15 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
stop_it = 0;
- // this loop skips to the next present function
- // reading in the Class Code and the Header type.
-
+ /* this loop skips to the next present function
+ * reading in the Class Code and the Header type.
+ */
while ((function < max_functions) && (!stop_it)) {
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
- if (ID == 0xFFFFFFFF) { // nothing there.
+ if (ID == 0xFFFFFFFF) { /* nothing there. */
function++;
- } else { // Something there
+ } else { /* Something there */
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
@@ -552,7 +559,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
}
} while (function < max_functions);
- } // End of IF (device in slot?)
+ } /* End of IF (device in slot?) */
else {
return 2;
}
@@ -590,11 +597,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
- // PCI-PCI Bridge
pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
@@ -610,23 +616,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
}
pci_bus->number = func->bus;
- //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together
- // Figure out IO and memory base lengths
+ /* FIXME: this loop is duplicated in the non-bridge
+ * case. The two could be rolled together Figure out
+ * IO and memory base lengths
+ */
for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // set base = amount of IO space requested
+ /* IO base
+ * set base = amount of IO space
+ * requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
+ /* memory base */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -637,32 +647,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
type = 0;
}
- // Save information in slot structure
+ /* Save information in slot structure */
func->base_length[(cloop - 0x10) >> 2] =
base;
func->base_type[(cloop - 0x10) >> 2] = type;
- } // End of base register loop
-
+ } /* End of base register loop */
- } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge
- // Figure out IO and memory base lengths
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // base = amount of IO space requested
+ /* IO base
+ * base = amount of IO space
+ * requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
- // base = amount of memory space requested
+ /* memory base
+ * base = amount of memory
+ * space requested
+ */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -673,16 +687,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
type = 0;
}
- // Save information in slot structure
+ /* Save information in slot structure */
func->base_length[(cloop - 0x10) >> 2] = base;
func->base_type[(cloop - 0x10) >> 2] = type;
- } // End of base register loop
+ } /* End of base register loop */
- } else { // Some other unknown header type
+ } else { /* Some other unknown header type */
}
- // find the next device in this slot
+ /* find the next device in this slot */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
@@ -728,18 +742,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Save the command register
+ /* Save the command register */
pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
- // disable card
+ /* disable card */
command = 0x00;
pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // Clear Bridge Control Register
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Clear Bridge Control Register */
command = 0x00;
pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
@@ -755,7 +769,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
bus_node->next = func->bus_head;
func->bus_head = bus_node;
- // Save IO base and Limit registers
+ /* Save IO base and Limit registers */
pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
@@ -771,7 +785,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
func->io_head = io_node;
}
- // Save memory base and Limit registers
+ /* Save memory base and Limit registers */
pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
@@ -787,7 +801,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
func->mem_head = mem_node;
}
- // Save prefetchable memory base and Limit registers
+ /* Save prefetchable memory base and Limit registers */
pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
@@ -802,7 +816,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
p_mem_node->next = func->p_mem_head;
func->p_mem_head = p_mem_node;
}
- // Figure out IO and memory base lengths
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
@@ -812,11 +826,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
temp_register = base;
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (((base & 0x03L) == 0x01)
&& (save_command & 0x01)) {
- // IO base
- // set temp_register = amount of IO space requested
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
temp_register = base & 0xFFFFFFFE;
temp_register = (~temp_register) + 1;
@@ -834,7 +851,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
if (((base & 0x0BL) == 0x08)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -851,7 +868,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
if (((base & 0x0BL) == 0x00)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -868,9 +885,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
return(1);
}
- } // End of base register loop
- } else if ((header_type & 0x7F) == 0x00) { // Standard header
- // Figure out IO and memory base lengths
+ } /* End of base register loop */
+ /* Standard header */
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
@@ -880,11 +898,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
temp_register = base;
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (((base & 0x03L) == 0x01)
&& (save_command & 0x01)) {
- // IO base
- // set temp_register = amount of IO space requested
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
temp_register = base & 0xFFFFFFFE;
temp_register = (~temp_register) + 1;
@@ -901,7 +922,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
if (((base & 0x0BL) == 0x08)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -918,7 +939,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
if (((base & 0x0BL) == 0x00)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -935,11 +956,12 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
} else
return(1);
}
- } // End of base register loop
- } else { // Some other unknown header type
+ } /* End of base register loop */
+ /* Some other unknown header type */
+ } else {
}
- // find the next device in this slot
+ /* find the next device in this slot */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
@@ -975,16 +997,17 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Start at the top of config space so that the control
- // registers are programmed last
+ /* Start at the top of config space so that the control
+ * registers are programmed last
+ */
for (cloop = 0x3C; cloop > 0; cloop -= 4) {
pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
}
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- // If this is a bridge device, restore subordinate devices
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ /* If this is a bridge device, restore subordinate devices */
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
@@ -1000,8 +1023,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
}
} else {
- // Check all the base Address Registers to make sure
- // they are the same. If not, the board is different.
+ /* Check all the base Address Registers to make sure
+ * they are the same. If not, the board is different.
+ */
for (cloop = 16; cloop < 40; cloop += 4) {
pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
@@ -1058,27 +1082,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
- // No adapter present
+ /* No adapter present */
if (temp_register == 0xFFFFFFFF)
return(NO_ADAPTER_PRESENT);
if (temp_register != func->config_space[0])
return(ADAPTER_NOT_SAME);
- // Check for same revision number and class code
+ /* Check for same revision number and class code */
pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
- // Adapter not the same
+ /* Adapter not the same */
if (temp_register != func->config_space[0x08 >> 2])
return(ADAPTER_NOT_SAME);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // In order to continue checking, we must program the
- // bus registers in the bridge to respond to accesses
- // for it's subordinate bus(es)
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* In order to continue checking, we must program the
+ * bus registers in the bridge to respond to accesses
+ * for its subordinate bus(es)
+ */
temp_register = func->config_space[0x18 >> 2];
pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
@@ -1096,35 +1121,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
}
}
- // Check to see if it is a standard config header
+ /* Check to see if it is a standard config header */
else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
- // Check subsystem vendor and ID
+ /* Check subsystem vendor and ID */
pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
if (temp_register != func->config_space[0x2C >> 2]) {
- // If it's a SMART-2 and the register isn't filled
- // in, ignore the difference because
- // they just have an old rev of the firmware
-
+ /* If it's a SMART-2 and the register isn't
+ * filled in, ignore the difference because
+ * they just have an old rev of the firmware
+ */
if (!((func->config_space[0] == 0xAE100E11)
&& (temp_register == 0x00L)))
return(ADAPTER_NOT_SAME);
}
- // Figure out IO and memory base lengths
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
- if (base) { // If this register is implemented
+
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // set base = amount of IO space requested
+ /* IO base
+ * set base = amount of IO
+ * space requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
+ /* memory base */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -1135,23 +1164,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
type = 0;
}
- // Check information in slot structure
+ /* Check information in slot structure */
if (func->base_length[(cloop - 0x10) >> 2] != base)
return(ADAPTER_NOT_SAME);
if (func->base_type[(cloop - 0x10) >> 2] != type)
return(ADAPTER_NOT_SAME);
- } // End of base register loop
+ } /* End of base register loop */
- } // End of (type 0 config space) else
+ } /* End of (type 0 config space) else */
else {
- // this is not a type 0 or 1 config space header so
- // we don't know how to do it
+ /* this is not a type 0 or 1 config space header so
+ * we don't know how to do it
+ */
return(DEVICE_TYPE_NOT_SUPPORTED);
}
- // Get the next function
+ /* Get the next function */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
@@ -1190,7 +1220,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
if (rom_resource_table == NULL) {
return -ENODEV;
}
- // Sum all resources and setup resource maps
+ /* Sum all resources and setup resource maps */
unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
dbg("unused_IRQ = %x\n", unused_IRQ);
@@ -1262,13 +1292,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
primary_bus, secondary_bus, max_bus);
- // If this entry isn't for our controller's bus, ignore it
+ /* If this entry isn't for our controller's bus, ignore it */
if (primary_bus != ctrl->bus) {
i--;
one_slot += sizeof (struct slot_rt);
continue;
}
- // find out if this entry is for an occupied slot
+ /* find out if this entry is for an occupied slot */
ctrl->pci_bus->number = primary_bus;
pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
dbg("temp_D_word = %x\n", temp_dword);
@@ -1282,13 +1312,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
}
- // If we can't find a match, skip this table entry
+ /* If we can't find a match, skip this table entry */
if (!func) {
i--;
one_slot += sizeof (struct slot_rt);
continue;
}
- // this may not work and shouldn't be used
+ /* this may not work and shouldn't be used */
if (secondary_bus != primary_bus)
bridged_slot = 1;
else
@@ -1301,7 +1331,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
}
- // If we've got a valid IO base, use it
+ /* If we've got a valid IO base, use it */
temp_dword = io_base + io_length;
@@ -1325,7 +1355,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
}
}
- // If we've got a valid memory base, use it
+ /* If we've got a valid memory base, use it */
temp_dword = mem_base + mem_length;
if ((mem_base) && (temp_dword < 0x10000)) {
mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
@@ -1348,8 +1378,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
}
}
- // If we've got a valid prefetchable memory base, and
- // the base + length isn't greater than 0xFFFF
+ /* If we've got a valid prefetchable memory base, and
+ * the base + length isn't greater than 0xFFFF
+ */
temp_dword = pre_mem_base + pre_mem_length;
if ((pre_mem_base) && (temp_dword < 0x10000)) {
p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
@@ -1372,9 +1403,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
}
}
- // If we've got a valid bus number, use it
- // The second condition is to ignore bus numbers on
- // populated slots that don't have PCI-PCI bridges
+ /* If we've got a valid bus number, use it
+ * The second condition is to ignore bus numbers on
+ * populated slots that don't have PCI-PCI bridges
+ */
if (secondary_bus && (secondary_bus != primary_bus)) {
bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
if (!bus_node)
@@ -1398,8 +1430,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
one_slot += sizeof (struct slot_rt);
}
- // If all of the following fail, we don't have any resources for
- // hot plug add
+ /* If all of the following fail, we don't have any resources for
+ * hot plug add
+ */
rc = 1;
rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
OpenPOWER on IntegriCloud