summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorHaavard Skinnemoen <hskinnemoen@atmel.com>2007-01-10 20:20:02 +0100
committerHaavard Skinnemoen <hskinnemoen@atmel.com>2007-02-09 15:01:59 +0100
commit3d60ee1b04320d0695e071828dbadf3564d4568a (patch)
treee8c7ab2f9318cc751a98da4589857edfe2c79e11
parent7f9f4678637f9ee1a999cc0870c4668f32e1a7eb (diff)
downloadop-kernel-dev-3d60ee1b04320d0695e071828dbadf3564d4568a.zip
op-kernel-dev-3d60ee1b04320d0695e071828dbadf3564d4568a.tar.gz
[AVR32] SPI platform code update
Move stuff in spi.c into ATSTK1002 board code and update SPI platform device definitions according to the new GPIO API. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-rw-r--r--arch/avr32/boards/atstk1000/Makefile2
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c14
-rw-r--r--arch/avr32/boards/atstk1000/spi.c27
-rw-r--r--arch/avr32/mach-at32ap/at32ap7000.c44
4 files changed, 51 insertions, 36 deletions
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index df94994..8e09922 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -1,2 +1,2 @@
-obj-y += setup.o spi.o flash.o
+obj-y += setup.o flash.o
obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index bca815f..d47e39f 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -8,15 +8,18 @@
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
+#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/spi/spi.h>
#include <asm/io.h>
#include <asm/setup.h>
+#include <asm/arch/at32ap7000.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
#include <asm/arch/portmux.h>
@@ -33,6 +36,16 @@ static struct eth_addr __initdata hw_addr[2];
static struct eth_platform_data __initdata eth_data[2];
extern struct lcdc_platform_data atstk1000_fb0_data;
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "ltv350qv",
+ .controller_data = (void *)GPIO_PIN_PA(4),
+ .max_speed_hz = 16000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ },
+};
+
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
@@ -136,6 +149,7 @@ static int __init atstk1002_init(void)
set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
at32_add_device_spi(0);
at32_add_device_lcdc(0, &atstk1000_fb0_data);
diff --git a/arch/avr32/boards/atstk1000/spi.c b/arch/avr32/boards/atstk1000/spi.c
deleted file mode 100644
index 567726c..0000000
--- a/arch/avr32/boards/atstk1000/spi.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * ATSTK1000 SPI devices
- *
- * Copyright (C) 2005 Atmel Norway
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "ltv350qv",
- .max_speed_hz = 16000000,
- .bus_num = 0,
- .chip_select = 1,
- },
-};
-
-static int board_init_spi(void)
-{
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- return 0;
-}
-arch_initcall(board_init_spi);
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 981d553..c1e477e 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -736,12 +736,19 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
-static struct resource spi0_resource[] = {
+static struct resource atmel_spi0_resource[] = {
PBMEM(0xffe00000),
IRQ(3),
};
-DEFINE_DEV(spi, 0);
-DEV_CLK(mck, spi0, pba, 0);
+DEFINE_DEV(atmel_spi, 0);
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
+static struct resource atmel_spi1_resource[] = {
+ PBMEM(0xffe00400),
+ IRQ(4),
+};
+DEFINE_DEV(atmel_spi, 1);
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
struct platform_device *__init at32_add_device_spi(unsigned int id)
{
@@ -749,13 +756,33 @@ struct platform_device *__init at32_add_device_spi(unsigned int id)
switch (id) {
case 0:
- pdev = &spi0_device;
+ pdev = &atmel_spi0_device;
select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
- select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
- select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
- select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
+
+ /* NPCS[2:0] */
+ at32_select_gpio(GPIO_PIN_PA(3),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(GPIO_PIN_PA(4),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(GPIO_PIN_PA(5),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ break;
+
+ case 1:
+ pdev = &atmel_spi1_device;
+ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+
+ /* NPCS[2:0] */
+ at32_select_gpio(GPIO_PIN_PB(2),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(GPIO_PIN_PB(3),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(GPIO_PIN_PB(4),
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
break;
default:
@@ -877,7 +904,8 @@ struct clk *at32_clock_list[] = {
&macb0_pclk,
&macb1_hclk,
&macb1_pclk,
- &spi0_mck,
+ &atmel_spi0_spi_clk,
+ &atmel_spi1_spi_clk,
&lcdc0_hclk,
&lcdc0_pixclk,
};
OpenPOWER on IntegriCloud