diff options
author | Hiral Patel <hiral.patel@qlogic.com> | 2014-04-11 16:54:20 -0400 |
---|---|---|
committer | Christoph Hellwig <hch@lst.de> | 2014-05-19 13:31:01 +0200 |
commit | 2f389fc47281dc5f0cfed1306ed22eba51bcc980 (patch) | |
tree | d4b82f8bc6faa3ef146143242fb948b03037f744 | |
parent | 4babb90e5744a56c01ce886cbed9a968a6258ba7 (diff) | |
download | op-kernel-dev-2f389fc47281dc5f0cfed1306ed22eba51bcc980.zip op-kernel-dev-2f389fc47281dc5f0cfed1306ed22eba51bcc980.tar.gz |
qla2xxx: Remove unnecessary delays from fw dump code path.
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-rw-r--r-- | drivers/scsi/qla2xxx/qla_dbg.c | 71 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_dbg.h | 2 |
2 files changed, 32 insertions, 41 deletions
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index ba72e16..16939a9 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -296,23 +296,13 @@ qla24xx_read_window(struct device_reg_24xx __iomem *reg, uint32_t iobase, return buf; } -int +void qla24xx_pause_risc(struct device_reg_24xx __iomem *reg) { - int rval = QLA_SUCCESS; - uint32_t cnt; - WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE); - for (cnt = 30000; - ((RD_REG_DWORD(®->host_status) & HSRX_RISC_PAUSED) == 0) && - rval == QLA_SUCCESS; cnt--) { - if (cnt) - udelay(100); - else - rval = QLA_FUNCTION_TIMEOUT; - } - return rval; + /* 100 usec delay is sufficient enough for hardware to pause RISC */ + udelay(100); } int @@ -320,10 +310,14 @@ qla24xx_soft_reset(struct qla_hw_data *ha) { int rval = QLA_SUCCESS; uint32_t cnt; - uint16_t mb0, wd; + uint16_t wd; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; - /* Reset RISC. */ + /* + * Reset RISC. The delay is dependent on system architecture. + * Driver can proceed with the reset sequence after waiting + * for a timeout period. + */ WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); for (cnt = 0; cnt < 30000; cnt++) { if ((RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE) == 0) @@ -337,13 +331,6 @@ qla24xx_soft_reset(struct qla_hw_data *ha) pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); udelay(100); - /* Wait for firmware to complete NVRAM accesses. */ - mb0 = (uint32_t) RD_REG_WORD(®->mailbox0); - for (cnt = 10000 ; cnt && mb0; cnt--) { - udelay(5); - mb0 = (uint32_t) RD_REG_WORD(®->mailbox0); - barrier(); - } /* Wait for soft-reset to complete. */ for (cnt = 0; cnt < 30000; cnt++) { @@ -356,10 +343,10 @@ qla24xx_soft_reset(struct qla_hw_data *ha) WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); RD_REG_DWORD(®->hccr); /* PCI Posting. */ - for (cnt = 30000; RD_REG_WORD(®->mailbox0) != 0 && + for (cnt = 10000; RD_REG_WORD(®->mailbox0) != 0 && rval == QLA_SUCCESS; cnt--) { if (cnt) - udelay(100); + udelay(10); else rval = QLA_FUNCTION_TIMEOUT; } @@ -1075,10 +1062,11 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) fw->host_status = htonl(RD_REG_DWORD(®->host_status)); - /* Pause RISC. */ - rval = qla24xx_pause_risc(reg); - if (rval != QLA_SUCCESS) - goto qla24xx_fw_dump_failed_0; + /* + * Pause RISC. No need to track timeout, as resetting the chip + * is the right approach incase of pause timeout + */ + qla24xx_pause_risc(reg); /* Host interface registers. */ dmp_reg = ®->flash_addr; @@ -1325,10 +1313,11 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) fw->host_status = htonl(RD_REG_DWORD(®->host_status)); - /* Pause RISC. */ - rval = qla24xx_pause_risc(reg); - if (rval != QLA_SUCCESS) - goto qla25xx_fw_dump_failed_0; + /* + * Pause RISC. No need to track timeout, as resetting the chip + * is the right approach incase of pause timeout + */ + qla24xx_pause_risc(reg); /* Host/Risc registers. */ iter_reg = fw->host_risc_reg; @@ -1641,10 +1630,11 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) fw->host_status = htonl(RD_REG_DWORD(®->host_status)); - /* Pause RISC. */ - rval = qla24xx_pause_risc(reg); - if (rval != QLA_SUCCESS) - goto qla81xx_fw_dump_failed_0; + /* + * Pause RISC. No need to track timeout, as resetting the chip + * is the right approach incase of pause timeout + */ + qla24xx_pause_risc(reg); /* Host/Risc registers. */ iter_reg = fw->host_risc_reg; @@ -1959,10 +1949,11 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) fw->host_status = htonl(RD_REG_DWORD(®->host_status)); - /* Pause RISC. */ - rval = qla24xx_pause_risc(reg); - if (rval != QLA_SUCCESS) - goto qla83xx_fw_dump_failed_0; + /* + * Pause RISC. No need to track timeout, as resetting the chip + * is the right approach incase of pause timeout + */ + qla24xx_pause_risc(reg); WRT_REG_DWORD(®->iobase_addr, 0x6000); dmp_reg = ®->iobase_window; diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index cc96104..3679b73 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -353,5 +353,5 @@ extern int qla27xx_dump_mpi_ram(struct qla_hw_data *, uint32_t, uint32_t *, uint32_t, void **); extern int qla24xx_dump_ram(struct qla_hw_data *, uint32_t, uint32_t *, uint32_t, void **); -extern int qla24xx_pause_risc(struct device_reg_24xx __iomem *); +extern void qla24xx_pause_risc(struct device_reg_24xx __iomem *); extern int qla24xx_soft_reset(struct qla_hw_data *); |