summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-07-26 17:13:04 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-07-26 17:13:04 -0700
commit2d86a3f04e345b03d5e429bfe14985ce26bff4dc (patch)
tree10d0d3e57fb65f4df6763e7ef859fdabcf4badd8
parent3960ef326a1838971466193ffa008ff37c1d978d (diff)
parent5ddac6bc1c4bfcbf645d18668a5033ca257a8ea7 (diff)
downloadop-kernel-dev-2d86a3f04e345b03d5e429bfe14985ce26bff4dc.zip
op-kernel-dev-2d86a3f04e345b03d5e429bfe14985ce26bff4dc.tar.gz
Merge branch 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: S3C64XX: Configure backup battery charger on Cragganmore ARM: S3C64XX: Fix WM8915 IRQ polarity on Cragganmore ARM: S3C64XX: Configure supplies for all Cragganmore regulators ARM: S3C64XX: Refresh Cragganmore support ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff OMAP4: Keyboard: Mux changes in the board file omap: blaze: add mmc5/wl1283 device support omap: 4430SDP: Register the card detect GPIO properly arm: omap3: cm-t35: add support for cm-t3730 OMAP3: beagle: add support for beagleboard xM revision C OMAP3: rx-51: Add full regulator definitions omap: rx51: Platform support for lp5523 led chip
-rw-r--r--arch/arm/mach-omap2/Kconfig6
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c148
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c77
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c78
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c135
-rw-r--r--arch/arm/mach-omap2/devices.c3
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig23
-rw-r--r--arch/arm/mach-s3c64xx/Makefile1
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/irqs.h4
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c774
-rw-r--r--arch/arm/plat-omap/include/plat/omap4-keypad.h3
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h1
12 files changed, 1205 insertions, 48 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 19d5891..4ae6257 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
- bool "CompuLab CM-T35 module"
+ bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP3
default y
+ select MACH_CM_T3730
select OMAP_PACKAGE_CUS
config MACH_CM_T3517
@@ -277,6 +278,9 @@ config MACH_CM_T3517
default y
select OMAP_PACKAGE_CBB
+config MACH_CM_T3730
+ bool
+
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 933b25b..a7c0b31 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -22,6 +22,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
@@ -37,6 +38,7 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
@@ -51,6 +53,9 @@
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define GPIO_WIFI_PMENA 54
+#define GPIO_WIFI_IRQ 53
+
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
@@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = {
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
+static struct omap_device_pad keypad_pads[] __initdata = {
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col2.kpd_col2",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col3.kpd_col3",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col4.kpd_col4",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col5.kpd_col5",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a23.kpd_col7",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a22.kpd_col6",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_row0.kpd_row0",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row1.kpd_row1",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row2.kpd_row2",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row3.kpd_row3",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row4.kpd_row4",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row5.kpd_row5",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a18.kpd_row6",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a19.kpd_row7",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
@@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = {
.rows = 8,
.cols = 8,
};
+
+static struct omap_board_data keypad_data = {
+ .id = 1,
+ .pads = keypad_pads,
+ .pads_cnt = ARRAY_SIZE(keypad_pads),
+};
+
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
@@ -315,8 +385,17 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
+ {
+ .mmc = 5,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ocr_mask = MMC_VDD_165_195,
+ .nonremovable = true,
+ },
{} /* Terminator */
};
@@ -324,6 +403,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
+ },
+};
+
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
@@ -593,6 +703,41 @@ static inline void board_serial_init(void)
}
#endif
+static void omap4_sdp4430_wifi_mux_init(void)
+{
+ omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
+ OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
+
+ omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+
+}
+
+static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+ .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+ .board_ref_clock = WL12XX_REFCLOCK_26,
+ .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+};
+
+static void omap4_sdp4430_wifi_init(void)
+{
+ omap4_sdp4430_wifi_mux_init();
+ if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
+ pr_err("Error setting wl12xx data\n");
+ platform_device_register(&omap_vwlan_device);
+}
+
static void __init omap_4430sdp_init(void)
{
int status;
@@ -609,6 +754,7 @@ static void __init omap_4430sdp_init(void)
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
@@ -622,7 +768,7 @@ static void __init omap_4430sdp_init(void)
ARRAY_SIZE(sdp4430_spi_board_info));
}
- status = omap4_keyboard_init(&sdp4430_keypad_data);
+ status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index f074921..3af8aab 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -1,5 +1,5 @@
/*
- * board-cm-t35.c (CompuLab CM-T35 module)
+ * CompuLab CM-T35/CM-T3730 modules support
*
* Copyright (C) 2009-2011 CompuLab, Ltd.
* Authors: Mike Rapoport <mike@compulab.co.il>
@@ -535,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- /* DSS */
+ /* common DSS */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
@@ -558,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -576,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+
+static void __init cm_t3x_common_dss_mux_init(int mux_mode)
+{
+ omap_mux_init_signal("dss_data18", mux_mode);
+ omap_mux_init_signal("dss_data19", mux_mode);
+ omap_mux_init_signal("dss_data20", mux_mode);
+ omap_mux_init_signal("dss_data21", mux_mode);
+ omap_mux_init_signal("dss_data22", mux_mode);
+ omap_mux_init_signal("dss_data23", mux_mode);
+}
+
+static void __init cm_t35_init_mux(void)
+{
+ omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+}
+
+static void __init cm_t3730_init_mux(void)
+{
+ omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+}
+#else
+static inline void cm_t35_init_mux(void) {}
+static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
-static void __init cm_t35_init(void)
+static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
- cm_t35_init_nand();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
@@ -598,6 +620,19 @@ static void __init cm_t35_init(void)
usbhs_init(&usbhs_bdata);
}
+static void __init cm_t35_init(void)
+{
+ cm_t3x_common_init();
+ cm_t35_init_mux();
+ cm_t35_init_nand();
+}
+
+static void __init cm_t3730_init(void)
+{
+ cm_t3x_common_init();
+ cm_t3730_init_mux();
+}
+
MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
@@ -607,3 +642,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
+
+MACHINE_START(CM_T3730, "Compulab CM-T3730")
+ .boot_params = 0x80000100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = cm_t35_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = cm_t3730_init,
+ .timer = &omap3_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 34f8411..32f5f89 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -60,7 +60,8 @@
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -68,14 +69,26 @@ enum {
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
+ OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
-static u8 omap3_beagle_get_rev(void)
-{
- return omap3_beagle_version;
-}
+/*
+ * Board-specific configuration
+ * Defaults to BeagleBoard-xMC
+ */
+static struct {
+ int mmc1_gpio_wp;
+ int usb_pwr_level;
+ int reset_gpio;
+ int usr_button_gpio;
+} beagle_config = {
+ .mmc1_gpio_wp = -EINVAL,
+ .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+ .reset_gpio = 129,
+ .usr_button_gpio = 4,
+};
static struct gpio omap3_beagle_rev_gpios[] __initdata = {
{ 171, GPIOF_IN, "rev_id_0" },
@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+ beagle_config.mmc1_gpio_wp = 29;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 0:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ break;
+ case 2:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
break;
default:
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
+ .gpio_wp = -EINVAL,
},
{} /* Terminator */
};
@@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int r, usb_pwr_level;
-
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- mmc[0].gpio_wp = -EINVAL;
- } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
- (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
+ int r;
+
+ if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
@@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- usb_pwr_level = GPIOF_OUT_INIT_HIGH;
- beagle_dvi_device.reset_gpio = 129;
+ /* Valid for all -xM revisions */
+ if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
@@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
} else {
- usb_pwr_level = GPIOF_OUT_INIT_LOW;
- beagle_dvi_device.reset_gpio = 170;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
+ beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
+ "nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -404,7 +424,8 @@ static struct platform_device leds_gpio = {
static struct gpio_keys_button gpio_buttons[] = {
{
.code = BTN_EXTRA,
- .gpio = 7,
+ /* Dynamically assigned depending on board */
+ .gpio = -EINVAL,
.desc = "user",
.wakeup = 1,
},
@@ -468,8 +489,8 @@ static void __init beagle_opp_init(void)
return;
}
- /* Custom OPP enabled for XM */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ /* Custom OPP enabled for all xM versions */
+ if (cpu_is_omap3630()) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
@@ -509,6 +530,9 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
+
+ gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
+
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index bdb24db..0c9e0f2 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -39,6 +39,7 @@
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
+#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
@@ -53,6 +54,7 @@
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
+#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
@@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
};
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ }, {
+ .chan_nr = 1,
+ .led_current = 50,
+ }, {
+ .chan_nr = 2,
+ .led_current = 50,
+ }, {
+ .chan_nr = 3,
+ .led_current = 50,
+ }, {
+ .chan_nr = 4,
+ .led_current = 50,
+ }, {
+ .chan_nr = 5,
+ .led_current = 50,
+ }, {
+ .chan_nr = 6,
+ .led_current = 50,
+ }, {
+ .chan_nr = 7,
+ .led_current = 50,
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ }
+};
+
+static int rx51_lp5523_setup(void)
+{
+ return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+ "lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+ gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+ gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+ .led_config = rx51_lp5523_led_config,
+ .num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_AUTO,
+ .setup_resources = rx51_lp5523_setup,
+ .release_resources = rx51_lp5523_release,
+ .enable = rx51_lp5523_enable,
+};
+#endif
+
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
@@ -495,6 +555,32 @@ static struct regulator_init_data rx51_vmmc2 = {
.consumer_supplies = rx51_vmmc2_supplies,
};
+static struct regulator_init_data rx51_vpll1 = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vpll2 = {
+ .constraints = {
+ .name = "VSDI_CSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct regulator_init_data rx51_vsim = {
.constraints = {
.name = "VMMC2_IO_18",
@@ -524,6 +610,43 @@ static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies,
};
+static struct regulator_init_data rx51_vintana1 = {
+ .constraints = {
+ .name = "VINTANA1",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintana2 = {
+ .constraints = {
+ .name = "VINTANA2",
+ .min_uV = 2750000,
+ .max_uV = 2750000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintdig = {
+ .constraints = {
+ .name = "VINTDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
@@ -761,7 +884,12 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
@@ -800,6 +928,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+ {
+ I2C_BOARD_INFO("lp5523", 0x32),
+ .platform_data = &rx51_lp5523_platform_data,
+ },
+#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
.platform_data = &rx51_tpa6130a2_data,
@@ -950,6 +1084,7 @@ error:
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
+ regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5b8ca68..1077ad6 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = {
};
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
- *sdp4430_keypad_data)
+ *sdp4430_keypad_data, struct omap_board_data *bdata)
{
struct omap_device *od;
struct omap_hwmod *oh;
@@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
name, oh->name);
return PTR_ERR(od);
}
+ oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
return 0;
}
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index fdc89fc..f057b6a 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -267,3 +267,26 @@ config MACH_SMARTQ7
select MACH_SMARTQ
help
Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+ bool "Wolfson Cragganmore 6410"
+ select CPU_S3C6410
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_KEYPAD
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_KEYPAD
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_WDT
+ select S3C_DEV_RTC
+ select S3C64XX_DEV_SPI
+ select S3C24XX_GPIO_EXTRA128
+ help
+ Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index f5a7144..61b4034 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
# device support
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 8e2df26..ddb63a1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -198,7 +198,9 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_SMDK6410_WM1190_EV1
+#ifdef CONFIG_MACH_WLF_CRAGG_6410
+#define IRQ_BOARD_NR 128
+#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
#define IRQ_BOARD_NR 64
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
new file mode 100644
index 0000000..9026249
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -0,0 +1,774 @@
+/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright 2011 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/basic_mmio_gpio.h>
+#include <linux/spi/spi.h>
+
+#include <linux/i2c/pca953x.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/s3c6410.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <mach/regs-gpio-memport.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <plat/keypad.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
+
+#include <sound/wm8915.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1000,
+ .dft_brightness = 600,
+ .pwm_period_ns = 100000, /* about 1kHz */
+};
+
+static struct platform_device crag6410_backlight_device = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &crag6410_backlight_data,
+ },
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+ pr_debug("%s: setting power %d\n", __func__, power);
+
+ if (power) {
+ gpio_set_value(S3C64XX_GPB(0), 1);
+ msleep(1);
+ s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+ } else {
+ gpio_direction_output(S3C64XX_GPF(14), 0);
+ gpio_set_value(S3C64XX_GPB(0), 0);
+ }
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &(struct plat_lcd_data) {
+ .set_power = crag6410_lcd_power_set,
+ },
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .left_margin = 150,
+ .right_margin = 80,
+ .upper_margin = 40,
+ .lower_margin = 5,
+ .hsync_len = 40,
+ .vsync_len = 5,
+ .xres = 640,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .virtual_y = 480 * 2,
+ .virtual_x = 640,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &crag6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_HOME),
+ KEY(0, 2, KEY_VOLUMEDOWN),
+ KEY(0, 3, KEY_HELP),
+ KEY(0, 4, KEY_MENU),
+ KEY(0, 5, KEY_MEDIA),
+ KEY(1, 0, 232),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_LEFT),
+ KEY(1, 3, KEY_UP),
+ KEY(1, 4, KEY_RIGHT),
+ KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+ .keymap = crag6410_keymap,
+ .keymap_size = ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+ .keymap_data = &crag6410_keymap_data,
+ .rows = 2,
+ .cols = 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+ [0] = {
+ .code = KEY_SUSPEND,
+ .gpio = S3C64XX_GPL(10), /* EINT 18 */
+ .type = EV_KEY,
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ [1] = {
+ .code = SW_FRONT_PROXIMITY,
+ .gpio = S3C64XX_GPN(11), /* EINT 11 */
+ .type = EV_SW,
+ },
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+ .buttons = crag6410_gpio_keys,
+ .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN5,
+ .end = S3C64XX_PA_XM0CSN5 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN5 + (1 << 8),
+ .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = S3C_EINT(17),
+ .end = S3C_EINT(17),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
+ .resource = crag6410_dm9k_resource,
+ .dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN4 + 1,
+ .end = S3C64XX_PA_XM0CSN4 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device crag6410_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = -1,
+ .resource = crag6410_mmgpio_resource,
+ .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
+ .dev.platform_data = &(struct bgpio_pdata) {
+ .base = -1,
+ },
+};
+
+static struct platform_device speyside_device = {
+ .name = "speyside",
+ .id = -1,
+};
+
+static struct platform_device speyside_wm8962_device = {
+ .name = "speyside-wm8962",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+ REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+ .consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+ .supply_name = "WALLVDD",
+ .microvolts = 5000000,
+ .init_data = &wallvdd_data,
+ .gpio = -EINVAL,
+};
+
+static struct platform_device wallvdd_device = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &wallvdd_pdata,
+ },
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_usb_hsotg,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c64xx_device_iis0,
+ &s3c64xx_device_iis1,
+ &samsung_asoc_dma,
+ &samsung_device_keypad,
+ &crag6410_gpio_keydev,
+ &crag6410_dm9k_device,
+ &s3c64xx_device_spi0,
+ &crag6410_mmgpio,
+ &crag6410_lcd_powerdev,
+ &crag6410_backlight_device,
+ &speyside_device,
+ &speyside_wm8962_device,
+ &wallvdd_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+ .gpio_base = PCA935X_GPIO_BASE,
+ .irq_base = 0,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm __initdata = {
+ .constraints = {
+ .name = "VDDARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+ .consumer_supplies = vddarm_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddint __initdata = {
+ .constraints = {
+ .name = "VDDINT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+static struct regulator_init_data vddmem __initdata = {
+ .constraints = {
+ .name = "VDDMEM",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddsys __initdata = {
+ .constraints = {
+ .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc __initdata = {
+ .constraints = {
+ .name = "VDDMMC,UH",
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+ .consumer_supplies = vddmmc_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotgi __initdata = {
+ .constraints = {
+ .name = "VDDOTGi",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotg __initdata = {
+ .constraints = {
+ .name = "VDDOTG",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddhi __initdata = {
+ .constraints = {
+ .name = "VDDHI",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddadc __initdata = {
+ .constraints = {
+ .name = "VDDADC,VDDDAC",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem0 __initdata = {
+ .constraints = {
+ .name = "VDDMEM0",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddpll __initdata = {
+ .constraints = {
+ .name = "VDDPLL",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddlcd __initdata = {
+ .constraints = {
+ .name = "VDDLCD",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddalive __initdata = {
+ .constraints = {
+ .name = "VDDALIVE",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+ .charger_enable = 1,
+ .vlim = 2500, /* mV */
+ .ilim = 200, /* uA */
+};
+
+static struct wm831x_status_pdata banff_red_led __initdata = {
+ .name = "banff:red:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led __initdata = {
+ .name = "banff:green:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata __initdata = {
+ .data_irq = S3C_EINT(26),
+ .pd_irq = S3C_EINT(27),
+};
+
+static struct wm831x_pdata crag_pmic_pdata __initdata = {
+ .wm831x_num = 1,
+ .irq_base = BANFF_PMIC_IRQ_BASE,
+ .gpio_base = GPIO_BOARD_START + 8,
+
+ .backup = &banff_backup_pdata,
+
+ .gpio_defaults = {
+ /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+ /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+ [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+ },
+
+ .dcdc = {
+ &vddarm, /* DCDC1 */
+ &vddint, /* DCDC2 */
+ &vddmem, /* DCDC3 */
+ },
+
+ .ldo = {
+ &vddsys, /* LDO1 */
+ &vddmmc, /* LDO2 */
+ NULL, /* LDO3 */
+ &vddotgi, /* LDO4 */
+ &vddotg, /* LDO5 */
+ &vddhi, /* LDO6 */
+ &vddadc, /* LDO7 */
+ &vddmem0, /* LDO8 */
+ &vddpll, /* LDO9 */
+ &vddlcd, /* LDO10 */
+ &vddalive, /* LDO11 */
+ },
+
+ .status = {
+ &banff_green_led,
+ &banff_red_led,
+ },
+
+ .touch = &touch_pdata,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("tca6408", 0x20),
+ .platform_data = &crag6410_pca_data,
+ },
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &crag_pmic_pdata,
+ .irq = S3C_EINT(23),
+ },
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+ .frequency = 400000,
+};
+
+static struct regulator_init_data pvdd_1v2 __initdata = {
+ .constraints = {
+ .name = "PVDD_1V2",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("CPVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DCVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_1v8 __initdata = {
+ .constraints = {
+ .name = "PVDD_1V8",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_1v8_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+ REGULATOR_SUPPLY("MICVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 __initdata = {
+ .constraints = {
+ .name = "PVDD_3V3",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_3v3_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+ .wm831x_num = 2,
+ .irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+ .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+
+ .gpio_defaults = {
+ /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+ [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ },
+
+ .dcdc = {
+ &pvdd_1v2, /* DCDC1 */
+ &pvdd_1v8, /* DCDC2 */
+ &pvdd_3v3, /* DCDC3 */
+ },
+
+ .disable_touch = true,
+};
+
+static struct wm8915_retune_mobile_config wm8915_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8915_pdata wm8915_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8915_DIFFERRENTIAL_1,
+ .inr_mode = WM8915_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8915_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8311", 0x34),
+ .irq = S3C_EINT(0),
+ .platform_data = &glenfarclas_pmic_pdata },
+
+ { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
+ { I2C_BOARD_INFO("wm8915", 0x1a),
+ .platform_data = &wm8915_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+static void __init crag6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+
+ /* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C64XX_GPF(11),
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+ /* force card-detected for prototype 0 */
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .cfg_gpio = crag6410_cfg_sdhci0,
+};
+
+static void __init crag6410_machine_init(void)
+{
+ /* Open drain IRQs need pullups */
+ s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+ gpio_request(S3C64XX_GPB(0), "LCD power");
+ gpio_direction_output(S3C64XX_GPB(0), 0);
+
+ gpio_request(S3C64XX_GPF(14), "LCD PWM");
+ gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
+
+ gpio_request(S3C64XX_GPB(1), "SD power");
+ gpio_direction_output(S3C64XX_GPB(1), 0);
+
+ gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+ gpio_direction_output(S3C64XX_GPF(10), 1);
+
+ s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+ s3c_i2c0_set_platdata(&i2c0_pdata);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&crag6410_lcd_pdata);
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+ platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+ regulator_has_full_constraints();
+
+ s3c_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+ /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = crag6410_map_io,
+ .init_machine = crag6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 2b1d9bc..9fe6c87 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -10,5 +10,6 @@ struct omap4_keypad_platform_data {
u8 cols;
};
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+ struct omap_board_data *);
#endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ac4b60d..a067484 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
DEBUG_LL_OMAP3(3, craneboard);
DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
OpenPOWER on IntegriCloud