diff options
author | Andrew Jeffery <andrew@aj.id.au> | 2017-11-20 15:12:06 +1030 |
---|---|---|
committer | Guenter Roeck <linux@roeck-us.net> | 2018-01-02 15:05:34 -0800 |
commit | cf583b4275761754638c946ff777546d1a9b6744 (patch) | |
tree | 1148c9ee65f4f716352c7d9d2a8b5f79611d9453 | |
parent | 464df6fa3766784b85b00d56cd4d7c706aee5375 (diff) | |
download | op-kernel-dev-cf583b4275761754638c946ff777546d1a9b6744.zip op-kernel-dev-cf583b4275761754638c946ff777546d1a9b6744.tar.gz |
hwmon: (pmbus/max31785) Add dual tachometer support
The dual tachometer feature is implemented in hardware with a TACHSEL
input to indicate the rotor under measurement, and exposed on the device
by extending the READ_FAN_SPEED_1 word with two extra bytes*. The need
to read the non-standard four-byte response leads to a cut-down
implementation of i2c_smbus_xfer_emulated() included in the driver.
Further, to expose the second rotor tachometer value to userspace the
values are exposed through virtual pages. We re-route accesses to
FAN_CONFIG_1_2 and READ_FAN_SPEED_1 on pages 23-28 (not defined by the
hardware) to the same registers on pages 0-5, and with the latter command
we extract the value from the second word of the four-byte response.
* The documentation recommends the slower rotor be associated with
TACHSEL=0, which corresponds to the first word of the response. The
TACHSEL=0 measurement is used by the controller's closed-loop fan
management to judge target fan rate.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-rw-r--r-- | Documentation/hwmon/max31785 | 8 | ||||
-rw-r--r-- | drivers/hwmon/pmbus/max31785.c | 147 |
2 files changed, 152 insertions, 3 deletions
diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 index 7b0a0a8c..270c5f8 100644 --- a/Documentation/hwmon/max31785 +++ b/Documentation/hwmon/max31785 @@ -17,8 +17,9 @@ management with temperature and remote voltage sensing. Various fan control features are provided, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. -For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the -two in the fan[1-4]_input attributes. +For dual-rotor configurations the MAX31785A exposes the second rotor tachometer +readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes +the slowest rotor measurement, and does so in the fan[1-4]_input attributes. Usage Notes ----------- @@ -31,7 +32,8 @@ Sysfs attributes fan[1-4]_alarm Fan alarm. fan[1-4]_fault Fan fault. -fan[1-4]_input Fan RPM. +fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the + second rotor of fans 1-4 fan[1-4]_target Fan input target in[1-6]_crit Critical maximum output voltage diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c index 8706a69..bffab44 100644 --- a/drivers/hwmon/pmbus/max31785.c +++ b/drivers/hwmon/pmbus/max31785.c @@ -16,9 +16,79 @@ enum max31785_regs { MFR_REVISION = 0x9b, + MFR_FAN_CONFIG = 0xf1, }; +#define MAX31785 0x3030 +#define MAX31785A 0x3040 + +#define MFR_FAN_CONFIG_DUAL_TACH BIT(12) + #define MAX31785_NR_PAGES 23 +#define MAX31785_NR_FAN_PAGES 6 + +static int max31785_read_byte_data(struct i2c_client *client, int page, + int reg) +{ + if (page < MAX31785_NR_PAGES) + return -ENODATA; + + switch (reg) { + case PMBUS_VOUT_MODE: + return -ENOTSUPP; + case PMBUS_FAN_CONFIG_12: + return pmbus_read_byte_data(client, page - MAX31785_NR_PAGES, + reg); + } + + return -ENODATA; +} + +static int max31785_write_byte(struct i2c_client *client, int page, u8 value) +{ + if (page < MAX31785_NR_PAGES) + return -ENODATA; + + return -ENOTSUPP; +} + +static int max31785_read_long_data(struct i2c_client *client, int page, + int reg, u32 *data) +{ + unsigned char cmdbuf[1]; + unsigned char rspbuf[4]; + int rc; + + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(cmdbuf), + .buf = cmdbuf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(rspbuf), + .buf = rspbuf, + }, + }; + + cmdbuf[0] = reg; + + rc = pmbus_set_page(client, page); + if (rc < 0) + return rc; + + rc = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (rc < 0) + return rc; + + *data = (rspbuf[0] << (0 * 8)) | (rspbuf[1] << (1 * 8)) | + (rspbuf[2] << (2 * 8)) | (rspbuf[3] << (3 * 8)); + + return rc; +} static int max31785_get_pwm(struct i2c_client *client, int page) { @@ -62,9 +132,30 @@ static int max31785_get_pwm_mode(struct i2c_client *client, int page) static int max31785_read_word_data(struct i2c_client *client, int page, int reg) { + u32 val; int rv; switch (reg) { + case PMBUS_READ_FAN_SPEED_1: + if (page < MAX31785_NR_PAGES) + return -ENODATA; + + rv = max31785_read_long_data(client, page - MAX31785_NR_PAGES, + reg, &val); + if (rv < 0) + return rv; + + rv = (val >> 16) & 0xffff; + break; + case PMBUS_FAN_COMMAND_1: + /* + * PMBUS_FAN_COMMAND_x is probed to judge whether or not to + * expose fan control registers. + * + * Don't expose fan_target attribute for virtual pages. + */ + rv = (page >= MAX31785_NR_PAGES) ? -ENOTSUPP : -ENODATA; + break; case PMBUS_VIRT_PWM_1: rv = max31785_get_pwm(client, page); break; @@ -157,11 +248,15 @@ static int max31785_write_word_data(struct i2c_client *client, int page, #define MAX31785_VOUT_FUNCS \ (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT) +#define MAX37185_NUM_FAN_PAGES 6 + static const struct pmbus_driver_info max31785_info = { .pages = MAX31785_NR_PAGES, .write_word_data = max31785_write_word_data, + .read_byte_data = max31785_read_byte_data, .read_word_data = max31785_read_word_data, + .write_byte = max31785_write_byte, /* RPM */ .format[PSC_FAN] = direct, @@ -208,13 +303,46 @@ static const struct pmbus_driver_info max31785_info = { .func[22] = MAX31785_VOUT_FUNCS, }; +static int max31785_configure_dual_tach(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int ret; + int i; + + for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) { + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_FAN_CONFIG); + if (ret < 0) + return ret; + + if (ret & MFR_FAN_CONFIG_DUAL_TACH) { + int virtual = MAX31785_NR_PAGES + i; + + info->pages = virtual + 1; + info->func[virtual] |= PMBUS_HAVE_FAN12; + info->func[virtual] |= PMBUS_PAGE_VIRTUAL; + } + } + + return 0; +} + static int max31785_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct pmbus_driver_info *info; + bool dual_tach = false; s64 ret; + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL); if (!info) return -ENOMEM; @@ -225,6 +353,25 @@ static int max31785_probe(struct i2c_client *client, if (ret < 0) return ret; + ret = i2c_smbus_read_word_data(client, MFR_REVISION); + if (ret < 0) + return ret; + + if (ret == MAX31785A) { + dual_tach = true; + } else if (ret == MAX31785) { + if (!strcmp("max31785a", id->name)) + dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n"); + } else { + return -ENODEV; + } + + if (dual_tach) { + ret = max31785_configure_dual_tach(client, info); + if (ret < 0) + return ret; + } + return pmbus_do_probe(client, id, info); } |