diff options
Diffstat (limited to 'x11vnc/tkx11vnc')
| -rwxr-xr-x | x11vnc/tkx11vnc | 7335 |
1 files changed, 0 insertions, 7335 deletions
diff --git a/x11vnc/tkx11vnc b/x11vnc/tkx11vnc deleted file mode 100755 index c87d753..0000000 --- a/x11vnc/tkx11vnc +++ /dev/null @@ -1,7335 +0,0 @@ -#!/bin/sh -# the next line restarts using wish. \ -exec wish "$0" "$@" -catch {rename send {}} -# -# Copyright (C) 2004-2009 Karl J. Runge <runge@karlrunge.com> -# All rights reserved. -# -# This is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This software is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this software; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, -# USA. - -# -# tkx11vnc v0.2 -# This is a simple frontend to x11vnc. It uses the remote control -# and query features (-remote/-query aka -R/-Q) to interact with it. -# It is just a quick-n-dirty hack (it parses -help output, etc), but -# it could be of use playing with or learning about the (way too) many -# parameters x11vnc has. -# -# It can be used to interact with a running x11vnc (see the x11vnc -# -gui option), or to set the parameters and then start up x11vnc. -# - -# -# Below is a simple picture of how the gui should be laid out and how -# the menus should be organized. Most menu items correspond to remote -# control commands. A trailing ":" after the item name means it is a string -# to be set rather than a boolean that can be toggled (e.g. the entry -# box must be used). -# -# Some tweak options may be set in the prefix "=" string. -# A means it is an "Action" (not a true variable) -# R means it is an action only valid in remote mode. -# S means it is an action only valid in startup mode. -# Q means it is an action worth querying after running. -# P means the string can be +/- appended/deleted (string may not -# be the same after the remote command) -# G means gui internal item -# F means can be set via file browse -# D means for simple gui -# -C:val1,... means it will be a checkbox (radio button) -# the "-" means no other options follow -# 0 means to skip the item. -# -- means add a separator -# -# The =GAL ... =GAL LOFF stuff is to provide submenus. -# - -global env started time_count -set started "" -proc dtime {{msg ""}} { - global started time_count - if {$started == ""} { - return - } - set diff [expr "[exec gtod.bin] - $started"] - set diff [format "%.2f" $diff] - incr time_count - if {$msg == ""} { - set msg $time_count - } - puts -nonewline stderr "$msg $diff " - puts stderr [clock format [clock seconds]] -} - -if [info exists env(X11VNC_GUI_TIME)] { - global started time_count - set started [exec gtod.bin] - set time_count 0 - dtime "S" -} - -proc set_template {} { - global template - set template " -Row: Actions Clients Permissions Keyboard Pointer Help -Row: Displays Screen Tuning Debugging Misc - -Actions - =SA start - =RA stop - -- - =DSA attach - =DRA detach - -- - =RA ping - =RA update-all - =GAL Settings:: - =GA save-settings - =SFA load-settings: - =SA defaults-all - =0SA clear-all - -- - =F rc: - norc - =GAL LOFF - -- D - =DRA stop+quit - =DGA Quit - -Help - =DGA gui - =DGA all - -Clients - =DRQA current: - =DF connect: - =DRQA disconnect: - -- - accept: - afteraccept: - gone: - vncconnect - zeroconf - -- D - tightfilexfer - ultrafilexfer - proxy: - =GAL Chat:: - chatwindow - =DRA chaton - =DRA chatoff - =GAL LOFF - =GAL Java-applet:: - =D http - httpdir: - httpport: - https: - httpsredir: - enablehttpproxy - =GAL LOFF - -Displays - =D display: - =F auth: - =S reflect: - =D desktop: - =D rfbport: - =S autoport: - =0 gui: - -Screen - =DRA refresh - =RA reset - =RA blacken - -- D - =D scale: - scale_cursor: - -- - =D solid - solid_color: - -- - =GAL OverlayVisuals:: - overlay - overlay_nocursor - 8to24 - 8to24_opts: - =GAL LOFF - =GAL 8-Bit-Color:: - flashcmap - shiftcmap: - notruecolor - =GAL LOFF - =GAL SubWindow:: - id: - sid: - =RA id_cmd: - =GAL LOFF - =GAL ResizeRotate:: - = xrandr - =-C:resize,newfbsize,exit xrandr_mode: - rotate: - padgeom: - =GAL LOFF - =GAL Clipping:: - =P blackout: - xinerama - clip: - =GAL LOFF - =GAL Misc-Screen:: - fixscreen: - visual: - rawfb: - pipeinput: - uinput_accel: - uinput_reset: - uinput_always: - 24to32 - =GAL LOFF - -Keyboard - =D norepeat - =D add_keysyms - modtweak - xkb - -- - capslock - skip_lockkeys - -- - skip_keycodes: - skip_dups - sloppy_keys - -- - =FP remap: - clear_mods - clear_keys - clear_all - =RA clear_locks - -Pointer - =D-C:none,arrow,X,some,most cursor: - =-C:1,2,3,4,5,6 arrow: - -- - cursorpos - =D nocursorshape - -- - noxfixes - cursor_drag - =GAL AlphaBlending:: - noalphablend - alphacut: - alphafrac: - alpharemove - =GAL LOFF - -- - buttonmap: - -- - xwarppointer - always_inject - -Misc - =GD-C:full,icon,tray WindowView: - =GD simple-gui - -- D - =GA all-settings - =RA remote-cmd: - =GAL Selection:: - =D nosel - noprimary - nosetprimary - noclipboard - nosetclipboard - seldir: - =GAL LOFF - =GAL X-ext:: - xtrap - noxrecord - =RQA reset_record - =GAL LOFF - =GAL MacOSX:: - macnosaver - macnowait - macwheel: - macnoswap - macnoresize - maciconanim: - macmenu - =GAL LOFF - -- - 6 - noipv6 - noipv4 - -- - nofb - =D nobell - nolookup - rfbversion: - bg - =S loop - =S loopbg - =S sleepin: - =-C:ignore,exit sigpipe: - =0 inetd - -Debugging - debug_pointer - debug_keyboard - =F logfile: - =GA show-logfile - =GA tail-logfile - quiet - -- - =GA show-start-cmd - =DG debug_gui - =GAL Misc-Debug:: - debug_xevents - debug_xdamage - =-C:0,1,2,3 debug_wireframe: - debug_scroll - debug_tiles - debug_grabs - debug_sel - debug_ncache - dbg - =GAL LOFF - -Permissions - =DRQA lock - =DRQA unlock - =D shared - =D forever - -- - =DFP allow: - =D localhost - =RA allowonce: - listen: - -- D - =D viewonly - input: - -- - =GAL Passwords:: - passwd: - viewpasswd: - =F passwdfile: - =F rfbauth: - usepw - -- - unixpw - unixpw_list: - unixpw_nis - unixpw_nis_list: - =0 storepasswd - =GAL LOFF - =GAL SSL:: - ssl - =F ssl_pem: - stunnel - =F stunnel_pem: - =F ssldir: - =F sslverify: - ssltimeout: - -- - enc: - =GAL LOFF - =GAL Misc-Perms:: - safer - unsafe - =RA noremote - =0S alwaysshared - =0S nevershared - =0S dontdisconnect - =SQA deny_all - timeout: - grabkbd - grabptr - grabalways - grablocal: - forcedpms - clientdpms - noserverdpms - noultraext - =GAL LOFF - -Tuning - =D-C:0,1,2,3,4 pointer_mode: - input_skip: - allinput - =D nodragging - -- D - speeds: - =D wait: - defer: - =D nap - screen_blank: - -- - =GAL WireFrame:: - wireframe - wireframe_mode: - =-C:never,top,always wirecopyrect: - =GAL LOFF - =GAL ScrollCopyRect:: - =-C:never,keys,mouse,always scrollcopyrect: - scr_area: - scr_skip: - scr_inc: - scr_keys: - scr_term: - scr_keyrepeat: - scr_parms: - =GAL LOFF - =GAL XDAMAGE:: - xdamage - xd_area: - xd_mem: - =GAL LOFF - =GAL Ncache:: - ncache - ncache_size: - ncache_cr - ncache_no_moveraise - ncache_no_dtchange - ncache_old_wm - ncache_no_rootpixmap - ncache_keep_anims - ncache_pad: - =RA ncache_reset_rootpixmap - =GAL LOFF - -- - =GAL SharedMemory:: - noshm - flipbyteorder - onetile - =GAL LOFF - =GAL Misc-Tuning:: - progressive: - fs: - gaps: - grow: - fuzz: - extra_fbur: - wait_ui: - setdefer: - nowait_bog - slow_fb: - xrefresh: - readtimeout: - snapfb - threads - wmdt: - rfbwait: - nodpms - nofbpm - =GAL LOFF -" -} - -proc set_internal_help {} { - global helptext helpall - - # set some internal item help here: - set helptext(start) " -Launch x11vnc with the settings you have prescribed in the gui. -The x11vnc process is started in an xterm window so you can see the -output, kill it, etc. - -By viewing this help item, the command built so far will be displayed -in the gui text area. Have a look. If you Press start it will be shown -as well and you will be asked to confirm running it. - -If you want to use a saved profile \"rc file\" you can do \"Misc -> rc\" and -select the file and simply start x11vnc using the rc file. Alternatively, -you could first use the \"Actions -> load-settings\" action to load in -an \"rc file\" and then press \"Actions -> start\" to start up x11vnc -based on those values. -" - set helptext(stop) " -The \"Actions -> stop\" action sends a signal to the running x11vnc -server indicating it should shutdown all connections and exit. - -The GUI stays running in case you want to start a new x11vnc or attach -to another one. Use \"Actions -> Quit\" if you then want to have the -gui exit. Use \"Actions -> stop+quit\" to have both exit at once. -" - - set helptext(show-start-cmd) " -Displays in the text area what the x11vnc start command (i.e. the command -run by \"Actions -> start\") looks like for the current values of the -settings. This can be done even in the attached state. Intended for -debugging the gui. The help item for \"Actions -> start\" gives the -same info. - -If you want to load in a saved profile \"rc file\" use \"Misc -> rc\" -and select the file. \"Actions -> load-settings\" does a similar thing -with an rc-file, but reading the file and setting the gui variables to -its values. -" - - set helptext(debug_gui) " -Set debug_gui to get more output printed in the text area. -" - - set helptext(detach) " -No longer be associated with the x11vnc server. Switch to the -non-connected state. The x11vnc server keeps running: it does not exit. - -You can either later reattach to it \"Actions -> attach\", or start -up a new x11vnc \"Actions -> start\", or exit \"Actions -> Quit\". -" - - set helptext(attach) " -Attach to a running x11vnc server, if possible. Switches to connected -state if successful. Usually the channel used to attach is via the X -display (VNC_CONNECT rootwin property) being polled by the x11vnc server. -To change or set the X display to use do \"Displays -> display\". - -Sometimes the \"-connect /path/to/filename\" is used as the communcation -channel. The running x11vnc has to know that \"/path/to/filename\" -is the communication channel (i.e. it is using the same -connect option). -" - - set helptext(ping) " -Check if x11vnc still responds to \"ping\" remote command. -" - - set helptext(update-all) " -Query the x11vnc server for the current values of all variables. -Populate the values into the gui's database. - -Normally the gui will refresh this info every time it interacts with -the x11vnc server (including after a few minutes of inactivity), so one -doesn't need to use this action very often (unless something else is -changing the state of the x11vnc server, or new clients have connected, -etc). -" - - set helptext(clear-all) " -Forget any variable settings either entered in by you or set at the -default. Basically sets everything to 0 or the string (unset). - -This action is only available in \"startup\" mode, not when connected -to a running x11vnc server (in that case the variable settings reflect -the state of the running x11vnc). To detach from a running x11vnc -server use \"Actions -> detach\"; to completely stop the x11vnc server -use \"Actions -> stop\". -" - - set helptext(defaults-all) " -Reset all variable settings to the default values. Basically sets -everything to the default queries \"x11vnc -QD var\" retrieved at startup. - -This action is only available in \"startup\" mode, not when connected -to a running x11vnc server (in that case the variable settings reflect -the state of the running x11vnc). To detach from a running x11vnc -server use \"Actions -> detach\"; to completely stop the x11vnc server -use \"Actions -> stop\". -" - - set helptext(load-settings) " -Read in the \"rc file\" you prescribe in the dialog and then set the -variables to those in the rc-file. Any variables not mentioned in the -rc-file are set to their default value. - -You could then do \"Actions -> start\" to start x11vnc with these -parameters. Or you could make some further changes to variables -using the gui before starting x11vnc. - -This action is only available in \"startup\" mode, not when connected -to a running x11vnc server (in that case the variable settings reflect -the state of the running x11vnc). To detach from a running x11vnc -server use \"Actions -> detach\"; to completely stop the x11vnc server -use \"Actions -> stop\". -" - - set helptext(save-settings) " -Construct a ~/.x11vncrc file based on the current settings and -offer to save it in a file (default ~/.x11vncrc). If saved in a -file other than the default, you can access the profile by using -the \"-rc <filename>\" option when starting x11vnc. - -If an rc file entry begins with \"#d\" that means the current -setting is at the Default value and so you probably want to leave -it commented out with the \"#\" character. - -If an rc file entry begins with \"#?\" that means we think -you probably do not really want to force the value to this setting. - -In either case, feel free to uncomment the line and/or change any -of the parameter values in the file. -" - - set helptext(all-settings) " -Displays the gui's database of all of the x11vnc server's current -settings. Use \"Actions -> update-all\" or \"Control+R\" to -refresh this list if it ever gets out of sync. -" - - set helptext(remote-cmd) " -Run a remote command (-R) or query (-Q) directly. Only a few -remote commands are not on a menu, but for those few you can -run the command directly this way. Just enter the command into -the Entry box when prompted. Use the prefix \"Q:\" to indicate -a -Q query. Examples: \"zero:20,20,100,100\", \"Q:ext_xfixes\" -" - - set helptext(stop+quit) " -Send the stop command to the x11vnc server, then terminate the tkx11vnc gui. -" - - set helptext(show-logfile) " -View the current contents of the logfile (if it exists and is accessible -by the gui process). -" - - set helptext(tail-logfile) " -Run the tail(1) command with -f option on the logfile in an xterm. -(if it exists and is accessible by the gui process). -" - - set helptext(Quit) " -Terminate the tkx11vnc gui. Any x11vnc server will be left running. -" - - set helptext(current) " -Shows a menu of currently connected VNC clients on the x11vnc server. - -Allows you to find more information about them, change their input -permissions, or disconnect them. - -Note that the File transfer permission only applies to UltraVNC -file transfer, not TightVNC file transfer. - -You will be prompted to confirm any disconnections. -" - - set helptext(client) " -After selecting a VNC client from the \"Clients -> current\" menu, -you will be presented with a dialog that shows the information -about the VNC client. - -You can choose to disconnect the client by clicking on the -\"Disconnect\" checkbox and pressing \"OK\". There will be a -confirmation dialog to doublecheck. - -Alternatively, you can fine tune the VNC client's input permissions -by selecting any of the Keystrokes, Mouse-Motion, Button-Click, -Clipboard-Input, or Files checkboxes and pressing \"OK\". This is like -the \"-input\" option but on a per-client basis. - -To not change any aspects of the VNC client press \"Cancel\". -" - - set helptext(solid_color) " -Set the -solid color value. -" - - set helptext(xrandr_mode) " -Set the -xrandr mode value. -" - - set helptext(unixpw_list) " -Set the -unixpw usernames list value. -" - - set helptext(unixpw_nis_list) " -Set the -unixpw_nis usernames list value. -" - - set helptext(stunnel_pem) " -Set the -stunnel pem filename value. -" - - set helptext(ssl_pem) " -Set the -ssl pem filename value. -" - - set helptext(wireframe_mode) " -Set the -wireframe mode string value. -" - - set helptext(simple-gui) " -Toggle between menu items corresponding the most basic ones -and all possible settings. I.e. toggle between a simple gui -and one for power users. -" - - set helptext(Tray) " -The tray/icon mode (started with \"x11vnc -gui tray ...\", etc.) presents -a small icon that indicates the status of the running x11vnc server. - -Depending on your environment, this icon may be embedded in a system -tray or applet dock, or simply be a standalone window. \"-gui tray\" -will attempt to embed the icon in the system tray, while \"-gui icon\" -is for a standalone window. Use \"-gui tray=setpass\" (or icon=setpass) -to be prompted to set the session password at startup. - -When the icon has a light background, that means no VNC viewers are -currently connected to the VNC display. - -When the icon has a dark background (i.e. reverse-video), that means at -least one VNC viewer is connected to the VNC display. - -Moving the mouse pointer over the icon will popup a \"status balloon\" -indicating the VNC display name and the names and info of any connected VNC -viewers. Press the middle mouse button if the balloon does not appear. - -Clicking the left or right mouse button on the icon displays a menu -of actions: - - Properties - Brings up the Properties dialog to set some basic - parameters. The full tkx11vnc GUI may be accessed - via the \"Advanced ...\" button. Press \"Help\" - in the Properties dialog for more info. - - Help - Displays this help text. - - New Client - Presents an entry box where you type in the name - of a computer that is running a VNC viewer in - \"listen\" mode (e.g. vncviewer -listen). For a - non-standard listening port use \"host:port\". - - Pressing \"OK\" will initiate the reverse - connection. Use a blank hostname to skip it. - - Disconnect - Shows a popup menu of connected clients. Click on - one to disconnect it, or click on \"All Clients\" - disconnect all clients. - - Window View - Switch between the \"full\" gui (also known as - \"Advanced\"), \"icon\" mode (small icon window with - popups), or \"tray\" mode (small icon embedded in the - system tray). This is a shortcut for the action: - \"Properties -> Advanced -> Misc -> WindowView\". - - Stop x11vnc - Directs the x11vnc server to disconnect all vncviewers - and then exit. The tray/icon GUI then exits as well. - - Logfile - Show the logfile if x11vnc is being run with one. - - Custom - If you have a \$HOME/.x11vnc.gui file each uncommented - line in it becomes an additional menu item for this - menu. The remote control command is run directly - via \"x11vnc -R <command>\", or if prefixed with - \"action:\" runs a gui internal action, or if \"sep\" - adds a separator. Set X11VNC_CUSTOM_GUI to use - a different filename. Example file contents: - - scale:3/4 - scale:1 - scale_cursor:1 - sep - action:all-settings - #debug_keyboard - sep - action:Quit - -Termination: - -If the x11vnc server stops for any reason, the tray/icon gui will exit. - -If you delete the tray/icon (e.g. X out button), that is the same -as the \"Stop x11vnc\" action in the menu. (This will disconnect any -VNC viewer you are currently using to access the display since the -x11vnc server is terminated). - -To terminate the tray/icon gui window but not the x11vnc server press -Control-C on the tray/icon window. You can also do this (and much -more) via Properties -> Advanced -> Actions -> Quit -" - - set helptext(NewClient) " - New Client - Presents an entry box where you type in the name - of a computer that is running a VNC viewer in - \"listen\" mode (e.g. vncviewer -listen). For a - non-standard listening port use \"host:port\". - - Pressing \"OK\" will initiate the reverse - connection. Use a blank hostname to skip it, or - delete (\"X-out\") the window. - -" - - set helptext(Properties) " -The Properties dialog allows you to set some basic parameters of a -running x11vnc server. After modifying them press \"OK\" or \"Apply\" -to apply the changes, or press \"Cancel\" to skip applying them. - - Accept Connections: - - Toggles whether VNC viewers are allowed to connect or not. It corresponds - to the \"-R unlock\" and \"-R lock\" remote-control commands. - - Ask for Confirmation: - - Toggles whether a popup menu will be presented at the X display when - a new VNC viewer attempts to connect. The person sitting at the X - display can choose to accept or reject the connection or accept the - connection in ViewOnly mode. It corresponds to the \"-R accept:popup\" - and \"-R accept:\" remote-control commands. - - All Clients ViewOnly: - - Toggles whether the entire VNC desktop is view only. All clients - will only be able to watch when this is set (regardless of how they - logged in). It corresponds to the \"-R viewonly\" and \"-R noviewonly\" - remote-control commands. - - Shared: - - Toggles whether multiple simultaneous viewer connections are allowed - or not. It corresponds to the \"-R shared\" and \"-R noshared\" - remote-control commands. - - Advertise Service (Zeroconf): - - Toggles whether this VNC server should advertize itself via Zeroconf - (also called Bonjour, mDNS, and avahi). Then VNC viewers can then find - this service on the local network. It corresponds to the \"-R zeroconf\" - and \"-R nozeroconf\" remote-control commands. - - Serve Java Viewer Applet: - - Toggles whether this VNC server should serve up a Java VNC Viewer - applet via HTTP on http://hostname:5800/ (or port 5800+n for VNC - port 5900+n). A java enabled Web Browser can then connect to the - desktopby VNC. If SSL is active then the HTTPS URL https://hostname:5900/ - (etc.) will work as well. This requires the x11vnc java viewer jar file - (shared/x11vnc/classes) to be installed. It corresponds to the - \"-R http\" and \"-R nohttp\" remote commands. - - Solid Background Color: - - To improve VNC performance, if this option is set, then x11vnc will try - to make the desktop background a solid color (which compresses extremely - well compared to photo images, etc.) It corresponds to the \"-R solid\" - and \"-R nosolid\" remote commands. - - Password: - - Lets you set the session password viewers may use to gain full access - to the display. This will only work if x11vnc was started with the - -gui icon or -gui tray mode. - - ViewOnly Password: - - Lets you set the session password viewers may use to gain view only - access to the display. This will only work if x11vnc was started with - the -gui icon or -gui tray mode. - - - NOTE: These \"session\" passwords only last for the current x11vnc - session (they are not remembered, see the -storepasswd, -passwdfile, - and -rfbauth x11vnc options for using stored passwords). - - If you set \"Password\" to the empty string that makes the \"ViewOnly - Password\" empty as well and removes the need for any password to log in. - - If you set \"ViewOnly Password\" to the empty string that just removes - the ViewOnly log in aspect: \"Password\" is still required to log in. - - - The \"Help\" button shows this help text. - - - The \"Advanced ...\" button replaces the Properties dialog with the full - tkx11vnc GUI. All dynamic settings can be modified in the full GUI. - - -========================================================================== - -Don't Lock Yourself Out: - - If you are sitting at the physical X display you cannot get into too - much trouble setting the Properties dialog values. - - However IF you are using a VNC Viewer to REMOTELY access the X display - some items in the Properties dialog can lock you out of further access: - - \"Accept Connections\" if you disable this remotely, and - accidentally disconnect your VNC viewer then you will not be - able to reconnect. - - \"Ask for Confirmation\" if you enable this only someone - sitting at the X display can confirm any new VNC connections. - Furthermore, any current VNC viewers will be blocked while - waiting for the confirmation (times out in 120 sec by default). - - \"All Clients ViewOnly\" if you enable this remotely, well - you can no longer provide input to disable it. - - If you do lock yourself out you could log in remotely and start up - a second x11vnc and connect to that one to try to fix things in the - first one. - - Note that if there are two or more x11vnc's on the same display the - use of the GUI may be ill-behaved. Terminate the second x11vnc as - soon as you have fixed the setting in the first one. Use of a remote - control command, e.g. \"x11vnc -R noviewonly\" or \"x11vnc -R unlock\" - is a good way to avoid this problem. -" - - set helptext(all) $helpall - - set helptext(Misc-Tuning:) " -x11vnc has what seems like hundreds of tuning parameters! In this -sub-menu we place some lesser used ones. Most likely you'll want to -leave them at their default values, but you can try them out quickly -with the gui to see if they improve things. -" - - set helptext(Passwords:) " -The items in this sub-menu pertain to setting passwords. Note that x11vnc -has two types of password files: RealVNC-style ones (you can create them -with x11vnc -storepasswd or other VNC utility program) you use these -via -rfbauth; and plain-text file passwords you use via -passwdfile. - -Normally passwords cannot be changed by remote-control (e.g. the gui), -but for the case of the \"Icon\" and \"Tray\" modes this constraint has -been relaxed. - -In neither the RealVNC-style nor the plain-text file cases should the -password files be readable by users you do not want to access the VNC -server. Contrary to popular belief, the RealVNC-style passwords are -not encrypted, merely obscured. - -x11vnc has the even less secure -passwd and -viewpasswd supplied on -the command line. Be careful with these since they could be read by -users with something like the ps(1) command. On some operating systems -x11vnc tries to quickly overwrite them on the command line but it doesn't -work everywhere. - -Regarding ViewOnly passwords (where a VNC client using that password -can only watch the screen, not interact with it), this is not available -with -rfbauth, but only with -passwdfile, -passwd, and -viewpasswd. -" - - set helptext(SSL:) " -In this sub-menu we provide the options related to SSL encrpytion -and authentication. - -There is a built-in mode (-ssl) using the OpenSSL library, and a 2nd -using the external stunnel program (-stunnel, that needs to be installed -on the system). Either may require or benefit from having PEM certificate -files specified. - -" - - set helptext(Misc-Perms:) " -In this sub-menu we provide some lesser used permission options. - -Regarding -alwaysshared, -nevershared, and -dontdisconnect, you probably -should never use them and just use x11vnc's -shared and -forever options -instead (these give basically the same functionality and if you mixed -them too much unexpected things may happen). -" -#' - - set helptext(AlphaBlending:) " -In this sub-menu we provide some tweak parameters for cursors (little -icon at the mouse pointer) that have transparency (i.e. an Alpha channel -in addition to Red, Green, and Blue RGB channels). For these cursors, -some of the graphics underneath the cursor is allowed to be blended in: -e.g. a drop-shadow (a terrible effect IMNSHO). - -AlphaBlending for x11vnc is only available when the XFIXES X extension is -present (since otherwise it cannot see the cursors at all and so applies -heuristics to show some fake cursors). AlphaBlending is only a problem -with x11vnc when the cursors are not opaque. - -Opaque cursors (e.g. bitmap or simply colored cursor) are rendered -correctly by x11vnc. Only when there is transparency does x11vnc have -to make some approximation to transform the cursor to be opaque (the -VNC protocol does not provide for an alpha channel in cursors, only RGB). - -The items in this sub-menu let you tweak x11vnc's approximation scheme -for cursors with transparency. Hopefully you won't have to use them. -Certain cursor \"themes\" may require adjustment however. -" -#' - set helptext(OverlayVisuals:) " -In this sub-menu are some options that involve fixing color problems -for \"Overlay\" or \"Multi-Depth\" visuals. This problem is rare -since overlay and multi-depth visual video hardware is rare. -Some Sun, SGI, and HP machines are known to have them. - -The short answer is if you have a multi-depth visual display (e.g. 8 and -24 bits), and you see messed up colors in x11vnc try the \"-overlay\" -option on Solaris or IRIX. - -A brief Background on pixels, color, and visuals: - - Pixels (picture elements) are kept in video memory as a certain number - of bits-per-pixel (bpp). Most common are 8bpp, 16bpp, and 32bpp. - Less common are 24bpp, 4bpp, and 1bpp (monochrome). - - How pixel values (i.e. values of the bits) are rendered into colors on - the screen can be done via different \"Recipes\". These different - recipes are referred to as \"visuals\". E.g. for 8bpp there is - a PseudoColor visual that maintains a mapping (that can be changed - dynamically) of the pixel values (256 possible ones) into RGB values. - Other 8bpp visuals, e.g. StaticGrey and TrueColor have fixed, regular - mappings and so provide less variation in kinds of colors. - - A visual's \"depth\" is how many of the pixels are used in the - actual recipe. This may sound wasteful (i.e. not using some of the - bits), but for 32bpp (4 billion colors) that is too much and nearly - always only 24 for them are used. The most common Visual seems to - be depth 24 TrueColor at 32bpp. This provides 16 million colors - which is more than the number of pixels on most screens (1280x1024 = - 1.3 million pixels). Another sometimes used visual that ignores some - bits is depth 15 TrueColor at 16bpp. - -OK, now, finally, to the Overlay Visuals. Some hardware (or software -emulations) allow different depth visuals to be used on the display -at the same time. The pixels of windows using different depth visuals -may overlap. - -The most common seems to be both 8 and 24 depth visuals on a 32bpp setup. -24 of the pixels can be used for one visual and the remaining 8 for the -other. This is sometimes referred to as \"8+24\" mode. Furthermore, -a speedup is achieved because writing graphics data to, say, the 8bit -visual does not destroy the image data in the 24bit visual. Evidently -popup menus can be done very quickly this way: they use the 8bit visual -and when the popup goes away the graphics data in the 24bit visual is -immediately reexposed without having the application redraw it. - -Also, some legacy applications can only use 8bpp visuals. But in these -days of high color graphics and web browsers one would like the rest -of the desktop to use depth 24 visuals. They often work on the multi -depth visuals. - -How does this effect x11vnc? x11vnc nearly always polls the root window -(container of all other windows). The root window will be one depth, -e.g. 8 or 24. Any windows using the *other* depth will appear to have -messed up colors (or just be black or some other solid color) when viewed -via x11vnc. - -How to fix? Solaris and IRIX provide an API to extract the full snapshot -of the display with all the colors correct. It comes to x11vnc as depth -24 TrueColor. To enable this use the \"-overlay\" option. Performance -may be slower, but if the colors are correct that is a big improvement. -" - - set helptext(8-Bit-Color:) " -Some older displays (e.g. with limited Video RAM) use 8 bits-per-pixel -color. This allows for only 256 different colors on the screen at the -same time. This sometimes leads to problems with viewing these 8bpp -displays via x11vnc. This sub-menu has some options that correspond to -workarounds for this case. If you can configure the machine to use 16bpp -it may be worth it to avoid the color problems (e.g. color flashing -as the 8bit colormap is switched). -" - set helptext(SubWindow:) " -This sub-menu has a couple options regarding having x11vnc poll a -single window, not the entire display. This way just the window -is shared. - -Note if the application pops up multiple windows they are not tracked -and shared. So this is not application sharing. The application has to -be very simple (e.g. a simple terminal or the image window on a webcam) -for this mode to be usable. -" - set helptext(ResizeRotate:) " -This sub-menu has some options regarding screens that support the X -Resize, Reflection, and Rotation Extension (RANDR), and one expects screen -resizing, reflection, or rotation to take place during the x11vnc session. -This is pretty rare, but x11vnc seems to handle it reasonably well using -this X extension. - -This mode is on by default in -id mode to try to track the changing -size of the SubWindow. It is not on by default for full-screen mode -because of the extra overhead, etc. -" - - set helptext(WireFrame:) " -This sub-menu has some options for the x11vnc wireframing speedup scheme. - -For x11vnc, Wireframing means to watch for toplevel windows being Opaquely -Moved or Resized. When x11vnc detects this, it stops polling the screen -and simply shows a \"wireframe\" outline of the window as it is being -moved or resized. This avoids \"screen polling thrashing\" when the -screen is changing so rapidly during this period. For various reasons -this is usually much faster then letting the window manager do its -own wireframing (you are encouraged to do Opaque moves and resizes -when using x11vnc!) - -Also, once a moved window is released in its new position, x11vnc uses -the VNC CopyRect encoding to very efficiently update the VNC viewers -(each just copies the image data locally). - -This sort of scheme was used much in the 1990's on local displays because -video hardware was slow at the time. x11vnc tries to use this same trick -as a speedup for its activities (the network is much slower than video -hardware writes, and the video hardware reads that x11vnc uses to poll -the screen are still slow today). -" -#'" - - set helptext(Safe:) " -In this sub-menu are some options for making x11vnc operations -more, or less, safe. E.g. disable the running of external commands, etc. - -You can also turn off the Remote control channel (NOTE that doing that -will disable the GUI from being able to communicate with x11vnc). -" - - set helptext(X-ext:) " -In this sub-menu are a few rarely used options regarding some X extensions -used by x11vnc. -" - set helptext(Clipping:) " -In this sub-menu are some options regarding clipping or blacking out -portions of the Screen. E.g. under XINERAMA when the multiple monitors -are not the same size. - -" - set helptext(Misc-Screen:) " -In this sub-menu are some little used options modifying aspects of -the screen source. -" - - set helptext(Settings:) " -In this sub-menu are some options for saving and loading option settings. -The default file to store settings in is ~/.x11vncrc, but you can save -different \"profiles\" in other files for later use. - -" - set helptext(Java-applet:) " -In this sub-menu are some options for running the built-in HTTP server -that delivers the TightVNC Java VNC Viewer applet (VncViewer.jar) to -clients. The viewer runs in their Web browser. - -The default port listened on is 5800, so the URL is typically: - - http://hostname:5800/ - -but this can be altered by -httpport, etc. -" - - set helptext(Chat:) " -In this sub-menu are some options for enabling a local chat window -and starting or stopping the current chat. This is the UltraVNC -Text Chat support in x11vnc. -" - - set helptext(ScrollCopyRect:) " -This sub-menu has some options for the x11vnc Scroll detection and -CopyRect speedup scheme. - -For this mode, x11vnc \"spies\" on communication between the X server and -applications using the RECORD extension. It looks for various patterns -to detect a scrolled window. This only works for some applications, -fortunately some important ones. - -Once the scroll is detected it uses the VNC CopyRect encoding for a -big speedup. Screen polling is also sped up for this scheme. - -There are many tweakable parameters for this mode and they are described -in the sub-menu items. -" - - set helptext(XDAMAGE:) " -The DAMAGE X extension allows the X server to send signals to x11vnc -telling it which regions of the screen have been changed. This improves -x11vnc's performance markedly. The DAMAGE extension must be available -on the display for this to work. - -Unfortunately DAMAGE cannot be trusted completely for the changed regions, -because often the reported changed region is much larger than the actual -changed regions. Nevertheless, x11vnc uses the DAMAGE information very -effectively as hints to improve its performance. - -The items in the sub-menu allow tweaking x11vnc's DAMAGE algorithm. -" - - set helptext(Ncache:) " -A simple client-side (viewer) caching scheme is enabled with the -\"-ncache n\" option. It simply uses \"n\" framebuffer sized areas -below the actual display for caching window pixel data. - -Drawbacks are it uses a lot of RAM (roughly n times more), and the -pixels cache area is visible in the viewers. - -The items in the sub-menu allow tweaking x11vnc's -ncache algorithm. -" - - set helptext(SharedMemory:) " -This sub-menu provides some options regarding SYSV shared memory usage -(shm) by x11vnc. Usually you want shm turned on because the x11vnc -process is nearly always running on the same machine the X server process -is running on. SharedMemory gives a performance speedup. However, if you -need to modify this scenario for special usage these options allow you to. -" - - set helptext(Misc-Debug:) " -This sub-menu contains a lot of debugging parameters usually used -for debugging x11vnc itself. This is unlike the -debug_pointer and --debug_keyboard options that are useful in learning information, quirks, -etc. about your local display and environment. -" - - set helptext(Selection:) " -This sub-menu contains some options centering around the Selection -(also referred to as the Clipboard, Cutbuffers, etc). x11vnc will try -to exchange the selections between the VNC viewers and the X server. -You can adjust that behavior with these options. -" - - set helptext(WindowView) " -Set the Window View Mode for the gui. There are three modes: - - - full: Presents the full gui (Actions, Clients, etc, buttons, - and the Text area and Set/Entry box). - - - icon: Presents a small icon instead of the full gui. Moving - the mouse over it shows the VNC display name and any - connected clients. Clicking on the icon pops up a menu - of actions to perform. Among them is \"Properties\" that - allows setting more parameters. Clicking on \"Advanced\" - in \"Properties\" brings up the full gui. - - - tray: Attempt to embed the small icon in the system tray. If - this fails it will resort to icon mode where the small icon - is a standalone window. - -Note that in \"full\" mode if you delete the full gui window the gui -terminates (but the x11vnc server keeps running). However under \"icon\" -or \"tray\" mode if you bring up the full gui window via \"Properties -> -Advanced\" and then delete it the gui does NOT terminate. - -Also note that by default in \"icon\" mode if you delete the icon -window both the gui *and* the x11vnc server terminate. -" - - set helptext(gui) " -tkx11vnc is a simple frontend to x11vnc. Nothing fancy, it merely -provides an interface to each of the many x11vnc command line options and -remote control commands. See \"Help -> all\" for much info about x11vnc. - -For a simplier gui, run x11vnc in \"tray\" or \"icon\" mode such as -\"-gui tray\", \"-gui icon\", or \"-gui tray=setpass\". In that -mode the full gui is only available under \"Advanced ...\". - -Also, \"-gui ez\" will show fewer menu items (toggle via Misc -> simple_gui) - -All menu items have a (?) button one can click on to get more information -about the option or command. - -There are two states tkx11vnc can be in: - - 1) Available to control a running x11vnc process. - - 2) Getting ready to start a x11vnc process. - -Most people will just use state 1). - -In state 1) the Menu items available in the menus are those that -correspond to the x11vnc \"remote control\" commands. See the -remote -entry under \"Help -> all\" for a complete list. Also available is -the \"Actions -> stop\" item to shut down the running x11vnc server, -thereby changing to state 2). There are other actions available too. - -In state 2) the Menu items available in the menus (\"Actions\", \"Clients\", -etc.) are those that correspond to command line options used in starting -an x11vnc process, and the \"Actions -> start\" item executes -x11vnc thereby changing to state 1). To see what x11vnc startup command -you have built so far, look at the (?) help for \"Actions -> start\" -and it will show you what the command looks like. - -There is much overlap between the menu items available in state 1) -and state 2), but it is worth keeping in mind it is not 100%. -For example, you cannot set passwords or password files in state 1). -(update: simple password setting is now allowed in \"tray\" or \"icon\" mode). - - -Also note that there may be *two* separate X displays involved, not just -one: 1) the X display x11vnc will be polling (and making available to -VNC viewers), and 2) the X display this GUI is intended to display on. - -For example, one might use ssh to access the remote machine where the -GUI would display on :11 and x11vnc would poll display :0. By default -the gui will display on the value in the DISPLAY env. variable followed -by the value from the -display option. To override this, use something -like: \"-gui otherhost:0\", etc. - - -GUI components: ---- ---------- - -1) At the top of the gui is a info text label where information will - be posted, e.g. when traversing menu items text indicating how to get - help on the item and its current value will be displayed. - -2) Below the info label is the area where the menu buttons, \"Actions\", - \"Clients\", etc., are presented. If a menu item has a checkbox, - it corresponds to a boolean on/off variable. Otherwise it is - either a string variable, or an action not associated with a - variable (for the most part). - -3) Below the menu button area is a label indicating the current x11vnc - X display being polled and the corresponding VNC display name. Both - will be \"(*none*)\" when there is no connection established. - -4) Below the x11 and vnc displays label is a text area there scrolling - information about actions being taken and commands being run is displayed. - To scroll click in the area and use PageUp/PageDown or the arrow keys. - -5) At the bottom is an entry area. When one selects a menu item that - requires supplying a string value, the label will be set to the - parameter name and one types in the new value. Then one presses the - \"OK\" button or presses \"Enter\" to set the value. Or you can press - \"Cancel\" or \"Escape\" to avoid changing the variable. - - Many variables are boolean toggles (for example, \"Permissions -> - viewonly\") or Radio button selections. Selecting these menu items - will NOT activate the entry area but rather toggle the variable - immediately. - - -CASCADES BUG: There is a bug not yet worked around for the cascade menus -where the (?) help button gets in the way. To get the mouse over to -the cascade menu click and release mouse to activate the cascade, then -you can click on its items. Dragging with a mouse button held down will -not work (sorry!). - - -Key Bindings: - - In the Text Area: Control-/ selects all of the text. - Anywhere: Control-d invokes \"Actions -> detach\" - Anywhere: Control-a invokes \"Actions -> attach\" - Anywhere: Control-p invokes \"Actions -> ping\" - Anywhere: Control-u and Control-r invoke \"Actions -> update-all\" -" - -set under_wally " -Misc: - -Since x11vnc has so many settings and to avoid further confusion, -the libvncserver options: - - -alwaysshared - -nevershared - -dontdisconnect - -are not available for changing in a running x11vnc (even though it -is feasible). These options overlap with the x11vnc options -shared -and -forever which are hopefully enough for most usage. They may be -specified for x11vnc startup if desired. - -" - -global beginner_mode -if {$beginner_mode} { - set helptext(gui) " -tkx11vnc is a simple frontend to x11vnc. It is currently running in -\"ez\" or \"simple\" mode. For many more options run it in normal -mode by toggling \"Misc -> simple_gui\". - -All menu items have a (?) button one can click on to get more information -about the option or command. - -GUI components: ---- ---------- - -1) At the top of the gui is a info text label where information will - be posted, e.g. when traversing menu items text indicating how to get - help on the item and its current value will be displayed. - -2) Below the info label is the area where the menu buttons, \"Actions\", - \"Clients\", etc., are presented. If a menu item has a checkbox, - it corresponds to a boolean on/off variable. Otherwise it is - either a string variable, or an action not associated with a - variable (for the most part). - -3) Below the menu button area is a label indicating the current x11vnc - X display being polled and the corresponding VNC display name. Both - will be \"(*none*)\" when there is no connection established. - -4) Below the x11 and vnc displays label is a text area there scrolling - information about actions being taken and commands being run is displayed. - To scroll click in the area and use PageUp/PageDown or the arrow keys. - -5) At the bottom is an entry area. When one selects a menu item that - requires supplying a string value, the label will be set to the - parameter name and one types in the new value. Then one presses the - \"OK\" button or presses \"Enter\" to set the value. Or you can press - \"Cancel\" or \"Escape\" to avoid changing the variable. - - Many variables are boolean toggles (for example, \"Permissions -> - viewonly\") or Radio button selections. Selecting these menu items - will NOT activate the entry area but rather toggle the variable - immediately. - -CASCADES BUG: There is a bug not yet worked around for the cascade menus -where the (?) help button gets in the way. To get the mouse over to -the cascade menu click and release mouse to activate the cascade, then -you can click on its items. Dragging with a mouse button held down will -not work (sorry!). - -" -} - -} - -proc center_win {w} { - wm withdraw $w - set x [expr [winfo screenwidth $w]/2 - [winfo reqwidth $w]/2]; - set y [expr [winfo screenheight $w]/2 - [winfo reqheight $w]/2]; - wm geometry $w +$x+$y - wm deiconify $w - update -} - -proc textwidth {text} { - set min 0; - foreach line [split $text "\n"] { - set n [string length $line] - if {$n > $min} { - set min $n - } - } - return $min -} - -proc textheight {text} { - set count 0; - foreach line [split $text "\n"] { - incr count - } - return $count -} - -proc set_name {name} { - global full_win icon_mode - global saved_set_name - - if {![info exists saved_set_name]} { - set saved_set_name "tkx11vnc" - } - if {$name == "RESTORE"} { - set name $saved_set_name - } else { - set saved_set_name $name - } - if {![info exists full_win]} { - return - } - set w "." - if {$icon_mode} { - wm title $w "$name" - wm iconname $w "$name" - set w $full_win - } - wm title $w "$name" - wm iconname $w "$name" -} - -proc make_toplevel {w {title ""}} { - catch {destroy $w} - toplevel $w; - bind $w <Escape> "destroy $w" - if {$title != ""} { - wm title $w $title - wm iconname $w $title - } -} - -proc textwin {name title text {entry ""}} { - global max_text_height max_text_width - global bfont ffont - - set width [textwidth $text] - incr width - if {$width > $max_text_width} { - set width $max_text_width - } - set height [textheight $text] - if {$height > $max_text_height} { - set height $max_text_height - } - - set w ".text_$name" - make_toplevel $w $title - - frame $w.f -bd 0; - pack $w.f -fill both -expand 1 - text $w.f.t -width $width -height $height -setgrid 1 -bd 2 \ - -yscrollcommand "$w.f.y set" -relief ridge \ - -font $ffont; - scrollbar $w.f.y -orient v -relief sunken -command "$w.f.t yview"; - button $w.f.b -text "Dismiss" -command "destroy $w" -font $bfont \ - -pady 2 - - $w.f.t insert 1.0 $text; - - bind $w <Enter> "focus $w.f.t" - - if {$entry != ""} { - # varname+Label Name - set list [split $entry "+"] - set varname [lindex $list 0] - set labname [lindex $list 1] - frame $w.f.ef -bd 1 -relief groove - label $w.f.ef.l -text "$labname" -anchor w -font $bfont - entry $w.f.ef.e -relief sunken -font $ffont \ - -textvariable $varname - button $w.f.ef.b -text "OK" -font $bfont \ - -command "set ${varname}_ok 1; destroy $w" - bind $w.f.ef.e <KeyPress-Return> "set ${varname}_ok 1; destroy $w" - - pack $w.f.ef.l -side left - pack $w.f.ef.e -side left -fill x -expand 1 - pack $w.f.ef.b -side right - } - - wm withdraw $w - pack $w.f.b -side bottom -fill x - if {$entry != ""} { - pack $w.f.ef -side bottom -fill x - bind $w <Enter> "focus $w.f.ef.e" - $w.f.ef.e icursor end - } else { - bind $w <Enter> "focus $w.f.t" - } - pack $w.f.y -side right -fill y; - pack $w.f.t -side top -fill both -expand 1; - update - - center_win $w - - return $w -} - -proc active_when_connected {item} { - global helpremote helptext - global icon_mode - - if {$icon_mode} { - if {$item == "passwd"} { - return 1 - } - if {$item == "viewpasswd"} { - return 1 - } - } - - if {[opt_match G $item]} { - return 1 - } elseif {[opt_match R $item]} { - return 1 - } elseif {[opt_match S $item]} { - return 0 - } elseif {[is_action $item]} { - if {[opt_match R $item]} { - return 1 - } else { - return 0 - } - } elseif {[info exists helpremote($item)]} { - return 1 - } else { - return 0 - } -} - -proc active_when_starting {item} { - global helpremote helptext beginner_mode - - if {$beginner_mode} { - if {[opt_match G $item]} { - return 1 - } - if {$item == "display"} { - return 1 - } - if {$item == "attach"} { - return 1 - } - if {$item == "debug_gui"} { - return 1 - } - return 0 - } - - if {[opt_match G $item]} { - return 1 - } elseif {[opt_match S $item]} { - return 1 - } elseif {[opt_match R $item]} { - return 0 - } elseif {[is_action $item]} { - if {[opt_match S $item]} { - return 1 - } else { - return 0 - } - } elseif {[info exists helptext($item)]} { - return 1 - } else { - return 0 - } -} - -proc help_win {item} { - global helptext helpremote menu_var - global query_ans query_aro - global beginner_mode - - set ok 0 - set text "Help on $item:\n\n" - - if {$item == "NewClient"} { - ; - } elseif {[is_gui_internal $item]} { - if {$item != "gui" && $item != "all" && $item != "Misc-Tuning:" \ - && $item != "Properties" && $item != "Tray"} { - append text " + Is a gui internal Action (cannot be set).\n"; - } - } elseif {[is_action $item]} { - append text " + Is a remote control Action (cannot be set).\n"; - } elseif {[active_when_connected $item]} { - append text " + Can be changed in a running x11vnc.\n"; - } else { - append text " - Cannot be changed in a running x11vnc.\n"; - } - if {$item == "NewClient"} { - ; - } elseif {[is_gui_internal $item]} { - ; - } elseif {[active_when_starting $item]} { - append text " + Can be set at x11vnc startup.\n"; - } else { - if {! $beginner_mode} { - append text " - Cannot be set at x11vnc startup.\n"; - } - } - append text "\n" - - if {[info exists helptext($item)]} { - append text "\n" - if {[is_gui_internal $item]} { - append text "==== x11vnc help: ====\n"; - } else { - append text "==== x11vnc startup option help: ====\n"; - } - append text "\n" - append text $helptext($item) - append text "\n" - set ok 1 - } - - if {[info exists helpremote($item)]} { - append text "\n" - append text "==== x11vnc remote control help: ====\n"; - append text "\n" - append text $helpremote($item) - set ok 1 - } - - if {![is_action $item] && [info exists menu_var($item)]} { - global unset_str - append text "\n\n" - append text "==== current $item value: ====\n"; - append text "\n" - - if {$item == "passwd" || $item == "viewpasswd"} { - ; - } elseif {$menu_var($item) == ""} { - append text "$unset_str\n" - } else { - append text "$menu_var($item)\n" - } - if {$item == "http" || $item == "httpdir" || $item == "httpport"} { - global vnc_url; - append text "\nURL: $vnc_url\n" - } - } - - if {$item == "start"} { - set str [get_start_x11vnc_txt] - append_text "$str\n" -# append text "\nPossible \$HOME/.x11vncrc settings for this command:\n\n" -# set rctxt [get_start_x11vnc_cmd 1] -# append text "$rctxt\n" - } - - regsub -all { } $item " " name - - if {$ok} { - textwin $name "x11vnc help: $item" "$text"; - } - return $ok -} - -proc parse_help {} { - global env x11vnc_prog; - global helpall helptext; - - set helppipe [open "| $x11vnc_prog -help" "r"]; - if {$helppipe == ""} { - puts stderr "failed to run $x11vnc_prog -help"; - exit 1; - } - - set sawopts 0; - set curropt ""; - while {[gets $helppipe line] > -1} { - append helpall "$line\n" - - # XXX - if {[regexp {^Options:} $line]} { - set sawopts 1; - continue; - } - # XXX - if {[regexp {^These options} $line]} { - continue; - } - # tweak aliases: - regsub {^-zeroconf} $line "-zero_conf" line - regsub {^-avahi } $line "-zeroconf" line - - if {! $sawopts} { - continue; - } - if {[regexp {^-([0-9A-z_][0-9A-z_]*)} $line match name]} { - set allnames($name) 1; - if {"$curropt" != "no$name" && "no$curropt" != "$name"} { - set curropt $name; - set helptext($curropt) "$line\n"; - } else { - append helptext($curropt) "$line\n"; - } - } elseif {$curropt != ""} { - append helptext($curropt) "$line\n"; - } - } - foreach name [array names allnames] { - if {[regexp {^no} $name]} { - regsub {^no} $name "" pair - } else { - set pair "no$name" - } - if {[info exists helptext($name)]} { - if ![info exists helptext($pair)] { - set helptext($pair) $helptext($name); - } - } elseif {[info exists helptext($pair)]} { - if ![info exists helptext($name)] { - set helptext($name) $helptext($pair); - } - } - } - - set_internal_help -} - -proc tweak_both {new old} { - tweak_help $new $old - tweak_remote_help $new $old -} - -proc tweak_remote_help {new old} { - global helpremote - if ![info exists helpremote($new)] { - if {[info exists helpremote($old)]} { - set helpremote($new) $helpremote($old) - } - } -} - -proc tweak_help {new old} { - global helptext - if ![info exists helptext($new)] { - if {[info exists helptext($old)]} { - set helptext($new) $helptext($old) - } - } -} - -proc parse_remote_help {} { - global helpremote helptext help_indent remote_name; - - set sawopts 0; - set curropt ""; - set possopts ""; - set offset [expr $help_indent - 1]; - foreach line [split $helptext(remote) "\n"] { - - set line [string range $line $offset end]; - - # XXX - if {[regexp {^The following -remote/-R commands} $line]} { - set sawopts 1; - continue; - } - # XXX - if {[regexp {^The vncconnect.*command} $line]} { - set sawopts 0; - } - - if {! $sawopts} { - continue; - } - if {[regexp {^([0-9A-z_][0-9A-z_:]*)} $line match name]} { - regsub {:.*$} $name "" popt - lappend possopts $popt - if {"$curropt" != "no$name" && "no$curropt" != "$name"} { - set curropt $name; - regsub {:.*$} $curropt "" curropt - set remote_name($curropt) $name - set helpremote($curropt) "$line\n"; - } else { - append helpremote($curropt) "$line\n"; - } - } elseif {$curropt != ""} { - append helpremote($curropt) "$line\n"; - } - } - - foreach popt $possopts { - if {[info exists helpremote($popt)]} { - continue - } - if {[regexp {^no} $popt]} { - regsub {^no} $popt "" try - } else { - set try "no$popt" - } - if {[info exists helpremote($try)]} { - set helpremote($popt) $helpremote($try) - } - } -} - -proc parse_query_help {} { - global query_ans query_aro query_ans_list query_aro_list helptext; - - set sawans 0; - set sawaro 0; - set ans_str "" - set aro_str "" - - foreach line [split $helptext(query) "\n"] { - - if {! $sawans && [regexp {^ *ans=} $line]} { - set sawans 1 - } - if {! $sawans} { - continue - } - - if {[regexp {^ *aro=} $line]} { - set sawaro 1 - } - if {$sawaro && [regexp {^[ ]*$} $line]} { - set sawans 0 - break - } - - regsub {ans=} $line "" line - regsub {aro=} $line "" line - set line [string trim $line] - - if {$sawaro} { - set aro_str "$aro_str $line" - } else { - set ans_str "$ans_str $line" - } - } - - regsub -all { *} $ans_str " " ans_str - regsub -all { *} $aro_str " " aro_str - - set ans_str [string trim $ans_str] - set aro_str [string trim $aro_str] - set query_ans_list [split $ans_str] - set query_aro_list [split $aro_str] - - foreach item $query_ans_list { - if {[regexp {^[ ]*$} $item]} { - continue - } - set query_ans($item) 1 - } - foreach item $query_aro_list { - if {[regexp {^[ ]*$} $item]} { - continue - } - set query_aro($item) 1 - } -} - -proc in_debug_mode {} { - global menu_var - if {![info exists menu_var(debug_gui)]} { - return 0 - } - return $menu_var(debug_gui) -} - -# Menubar utilities: -proc menus_state {state} { - global menu_b - - foreach case [array names menu_b] { - set menu_button $menu_b($case) - if {![winfo exists $menu_button]} { - continue - } - $menu_button configure -state $state - } -} - -proc menus_enable {} { - global menus_disabled - - menus_state "normal" - set menus_disabled 0 -} - -proc menus_disable {} { - global menus_disabled - - set menus_disabled 1 - menus_state "disabled" -} - -# Entry box utilities: -proc entry_state {x state} { - global entry_box entry_label entry_ok entry_help entry_skip entry_browse - global old_labels - if {$x == "all"} { - if {!$old_labels} { - $entry_label configure -state $state - } - $entry_box configure -state $state - $entry_ok configure -state $state - $entry_skip configure -state $state - $entry_help configure -state $state - $entry_browse configure -state $state - } elseif {$x == "label"} { - if {!$old_labels} { - $entry_label configure -state $state - } - } elseif {$x == "box"} { - $entry_box configure -state $state - } elseif {$x == "ok"} { - $entry_ok configure -state $state - } elseif {$x == "skip"} { - $entry_skip configure -state $state - } elseif {$x == "help"} { - $entry_help configure -state $state - } elseif {$x == "browse"} { - $entry_browse configure -state $state - } -} - -proc entry_enable {{x "all"}} { - entry_state $x normal -} - -proc entry_disable {{x "all"}} { - entry_state $x disabled -} - -proc entry_browse_button {{show 1}} { - global entry_browse - if {$show} { - pack $entry_browse -side left - } else { - pack forget $entry_browse - } -} -proc entry_focus {} { - global entry_box - focus $entry_box -} -proc entry_select {} { - global entry_box - $entry_box selection range 0 end -} -proc entry_get {} { - global entry_box - return [$entry_box get] -} -proc entry_insert {str} { - global entry_box - entry_delete - $entry_box insert end $str - $entry_box icursor end -} -proc entry_delete {} { - global entry_box - $entry_box delete 0 end -} - - -# Utilities for remote control and updating vars. - -proc push_new_value {item name new {query 1}} { - global menu_var always_update remote_output query_output - global query_result_list - - set debug [in_debug_mode] - - set getout 0 - set print_getout 0; - - set do_query_all 0 - - set newnew "" - if {$item == "disconnect"} { - set newnew "N/A" - set do_query_all 1 - } elseif {$always_update} { - set do_query_all 1 - } - - if {$item == "remote-cmd"} { - # kludge for arbitrary remote command: - if {[regexp {^Q:} $new]} { - # extra kludge for Q:var to mean -Q var - regsub {^Q:} $new "" new - set qonly 1 - } else { - set qonly 0 - } - # need to extract item from new: - set qtmp $new - regsub {:.*$} $qtmp "" qtmp - if {$qonly} { - set rargs [list "-Q" "$qtmp"] - set print_getout 1 - set qargs "" - } else { - set rargs [list "-R" "$new"] - set qargs "" - } - set getout 1 - - } elseif {[value_is_string $item]} { - # string var: - set rargs [list "-R" "$name:$new"] - set qargs [list "-Q" "$name"] - } else { - # boolean var: - set rargs [list "-R" "$name"] - set qargs [list "-Q" "$name"] - } - - if {! $query && ! $always_update} { - set getout 1 - } elseif {$item == "noremote"} { - set getout 1 - } elseif {[is_action $item] && ![opt_match Q $item] && $rargs != ""} { - set getout 1 - } elseif {[regexp {^(sid|id)$} $item] && ![regexp {^0x} $new]} { - set getout 1 - } - - set remote_output "" - set query_output "" - - if {!$debug} { - if [regexp {passwd} $rargs] { - append_text "x11vnc ..." - } else { - append_text "x11vnc $rargs ..." - } - } - - if {$getout} { - set remote_output [run_remote_cmd $rargs] - if {$print_getout} { - append_text "\t$remote_output" - } - append_text "\n" - return - } - - if {$do_query_all} { - set all [all_query_vars] - set qargs [list "-Q" $all] - - global last_query_all_time - set last_query_all_time [clock seconds] - } - - set rqargs [concat $rargs $qargs] - - set query [run_remote_cmd $rqargs] - set query_output $query - - set query_result_list "" - - if {$newnew != ""} { - set new $newnew - } - - if {![see_if_ok $query $item "$name:$new"]} { - # failed - if {[regexp {^a..=} $query]} { - # but some result came back - # synchronize everything with a 2nd call. - set query_output [query_all 1] - } else { - # server may be dead - if {$item != "ping" && $item != "attach"} { - try_connect - } - } - } else { - # succeeded - # synchronize this variable (or variables) - # for a speedup used the list parsed by see_if_ok. - update_menu_vars "USE_LIST" - - if {$do_query_all} { - global all_settings - set all_settings $query - } - } -} - -proc set_kmbc_str {} { - global vl_bk vl_bm vl_bb vl_bc vl_bf vr_bk vr_bm vr_bb vr_bc vr_bf - - set str "" - if {$vl_bk} { - append str "K" - } - if {$vl_bm} { - append str "M" - } - if {$vl_bb} { - append str "B" - } - if {$vl_bc} { - append str "C" - } - if {$vl_bf} { - append str "F" - } - if {$vr_bk || $vr_bm || $vr_bb || $vr_bc || $vr_bf} { - append str "," - } - if {$vr_bk} { - append str "K" - } - if {$vr_bm} { - append str "M" - } - if {$vr_bb} { - append str "B" - } - if {$vr_bc} { - append str "C" - } - if {$vr_bf} { - append str "F" - } - entry_insert $str -} - -proc insert_input_window {} { - global text_area cleanup_window - global ffont menu_var - global vl_bk vl_bm vl_bb vl_bc vl_bf vr_bk vr_bm vr_bb vr_bc vr_bf - - append_text "\nUse these checkboxes to set the input permissions, " - append_text "or type in the \"KMBCF...\"\n" - append_text "-input string manually. Then press \"OK\" or \"Cancel\".\n" - append_text "(note: an empty setting means use the default behavior, " - append_text "see viewonly)\n\n" - set w "$text_area.wk_f" - catch {destroy $w} - frame $w -bd 1 -relief ridge -cursor {top_left_arrow} - set fl $w.fl - frame $fl - set fr $w.fr - frame $fr - label $fl.l -font $ffont -text "Normal clients: " - checkbutton $fl.bk -pady 1 -font $ffont -anchor w -variable vl_bk \ - -pady 1 -command set_kmbc_str -text "Keystrokes" - checkbutton $fl.bm -font $ffont -anchor w -variable vl_bm \ - -pady 1 -command set_kmbc_str -text "Mouse-Motion" - checkbutton $fl.bb -font $ffont -anchor w -variable vl_bb \ - -pady 1 -command set_kmbc_str -text "Button-Click" - checkbutton $fl.bc -font $ffont -anchor w -variable vl_bc \ - -pady 1 -command set_kmbc_str -text "Clipboard-Input" - checkbutton $fl.bf -font $ffont -anchor w -variable vl_bf \ - -pady 1 -command set_kmbc_str -text "Files" - label $fr.l -pady 1 -font $ffont -text "View-Only clients:" - checkbutton $fr.bk -font $ffont -anchor w -variable vr_bk \ - -pady 1 -command set_kmbc_str -text "Keystrokes" - checkbutton $fr.bm -font $ffont -anchor w -variable vr_bm \ - -pady 1 -command set_kmbc_str -text "Mouse-Motion" - checkbutton $fr.bb -font $ffont -anchor w -variable vr_bb \ - -pady 1 -command set_kmbc_str -text "Button-Click" - checkbutton $fr.bc -font $ffont -anchor w -variable vr_bc \ - -pady 1 -command set_kmbc_str -text "Clipboard-Input" - checkbutton $fr.bf -font $ffont -anchor w -variable vr_bf \ - -pady 1 -command set_kmbc_str -text "Files" - - if {[info exists menu_var(input)]} { - set input_str $menu_var(input) - } else { - set input_str "" - } - - if {[regexp {(.*),(.*)} $input_str match normal viewonly]} { - ; - } else { - set normal $input_str - set viewonly "" - } - set vl_bk 0 - set vl_bm 0 - set vl_bb 0 - set vl_bc 0 - set vl_bf 0 - - set vr_bk 0 - set vr_bm 0 - set vr_bb 0 - set vr_bc 0 - set vr_bf 0 - - if {[regexp -nocase {K} $normal]} { - set vl_bk 1 - } - if {[regexp -nocase {M} $normal]} { - set vl_bm 1 - } - if {[regexp -nocase {B} $normal]} { - set vl_bb 1 - } - if {[regexp -nocase {C} $normal]} { - set vl_bc 1 - } - if {[regexp -nocase {F} $normal]} { - set vl_bf 1 - } - if {[regexp -nocase {K} $viewonly]} { - set vr_bk 1 - } - if {[regexp -nocase {M} $viewonly]} { - set vr_bm 1 - } - if {[regexp -nocase {B} $viewonly]} { - set vr_bb 1 - } - if {[regexp -nocase {C} $viewonly]} { - set vr_bc 1 - } - if {[regexp -nocase {F} $viewonly]} { - set vr_bf 1 - } - - pack $fl.l $fl.bk $fl.bm $fl.bb $fl.bc $fl.bf -side top -fill x - pack $fr.l $fr.bk $fr.bm $fr.bb $fr.bc $fr.bf -side top -fill x - pack $fl $fr -side left - update - update idletasks - $text_area window create end -window $w - $text_area see end - $text_area insert end "\n" -# $text_area insert end "\n\n\n\n\n\n\n\n\n" - - set cleanup_window $w -} - -proc set_ca_str {w} { - global ca_bk ca_bm ca_bb ca_bc ca_bf ca_di - - if {$ca_di} { - entry_insert "disconnect" - $w.bk configure -state disabled - $w.bm configure -state disabled - $w.bb configure -state disabled - $w.bc configure -state disabled - $w.bf configure -state disabled - return - } - - $w.bk configure -state normal - $w.bm configure -state normal - $w.bb configure -state normal - $w.bc configure -state normal - $w.bf configure -state normal - - set str "" - if {$ca_bk} { - append str "K" - } - if {$ca_bm} { - append str "M" - } - if {$ca_bb} { - append str "B" - } - if {$ca_bc} { - append str "C" - } - if {$ca_bf} { - append str "F" - } - entry_insert $str -} - -proc insert_client_action_window {input} { - global text_area cleanup_window - global ffont menu_var - global ca_bk ca_bm ca_bb ca_bc ca_bf ca_di - - append_text "\nUse these checkboxes to set the input permissions " - append_text "for this client\n-OR- whether to disconnect it instead. " - append_text "Then press \"OK\" or \"Cancel\".\n\n" - set w "$text_area.ca_f" - catch {destroy $w} - frame $w -bd 1 -relief ridge -cursor {top_left_arrow} - checkbutton $w.di -pady 1 -font $ffont -anchor w -variable ca_di \ - -pady 1 -command "set_ca_str $w" -text "Disconnect " - checkbutton $w.bk -font $ffont -anchor w -variable ca_bk \ - -pady 1 -command "set_ca_str $w" -text "Keystrokes" - checkbutton $w.bm -font $ffont -anchor w -variable ca_bm \ - -pady 1 -command "set_ca_str $w" -text "Mouse-Motion" - checkbutton $w.bb -font $ffont -anchor w -variable ca_bb \ - -pady 1 -command "set_ca_str $w" -text "Button-Click" - checkbutton $w.bc -font $ffont -anchor w -variable ca_bc \ - -pady 1 -command "set_ca_str $w" -text "Clipboard" - checkbutton $w.bf -font $ffont -anchor w -variable ca_bf \ - -pady 1 -command "set_ca_str $w" -text "Files" - - set ca_di 0 - set ca_bk 0 - set ca_bm 0 - set ca_bb 0 - set ca_bf 0 - set ca_bc 0 - - if {[regexp -nocase {K} $input]} { - set ca_bk 1 - } - if {[regexp -nocase {M} $input]} { - set ca_bm 1 - } - if {[regexp -nocase {B} $input]} { - set ca_bb 1 - } - if {[regexp -nocase {C} $input]} { - set ca_bc 1 - } - if {[regexp -nocase {F} $input]} { - set ca_bf 1 - } - - pack $w.di $w.bk $w.bm $w.bb $w.bc $w.bf -side left - update - update idletasks - $text_area window create end -window $w - $text_area see end - $text_area insert end "\n" - - set cleanup_window $w -} - -proc cleanup_text_window {} { - global cleanup_window - if {[info exists cleanup_window]} { - catch {destroy $cleanup_window} - } -} - -# For updating a string variable. Also used for simple OK/Cancel dialogs -# with entry = 0. -proc entry_dialog {item {entry 1}} { - global menu_var entry_str entry_set entry_dialog_item - global unset_str connected_to_x11vnc entry_box - - set entry_str "Set $item" - set entry_set 0 - set entry_dialog_item $item - - entry_enable - menus_disable - - if {$item == "passwd" || $item == "viewpasswd"} { - $entry_box configure -show "*" - } - - if {$entry} { - entry_insert "" - if {[info exists menu_var($item)] && - $menu_var($item) != $unset_str} { - entry_insert $menu_var($item) - entry_select - } - - if {[is_browse $item]} { - entry_browse_button - } - set_info "Set parameter in entry box, " - entry_focus - } else { - entry_disable box - } - - set clean_text_window 0; - - if {$item == "input"} { - insert_input_window - set clean_text_window 1 - } - - update - - # wait for user reply: - vwait entry_set - - set rc $entry_set - set entry_set 0 - - set value [entry_get] - update - - entry_browse_button 0 - set entry_str "Set... :" - - entry_delete - entry_disable - menus_enable - - if {$clean_text_window} { - cleanup_text_window; - } - - update - - if {! $entry} { - ; - } elseif {$rc} { - set menu_var($item) $value - } else { - if {[in_debug_mode]} { - append_text "skipped setting $item\n" - } - } - - $entry_box configure -show "" - - return $rc -} - -proc warning_dialog {msg {item "gui"} } { - append_text $msg - # just reuse the entry widgets for a yes/no dialog - return [entry_dialog $item 0] -} - -# For updating a boolean toggle: -proc check_var {item} { - global menu_var - - set inval $menu_var($item); - - if {$item == "debug_gui"} { - return ""; - } - - set rname $item - if {! $inval} { - if {[regexp {^no} $item]} { - regsub {^no} $rname "" rname - } else { - set rname "no$rname" - } - } - return $rname -} - -proc see_if_ok {query item expected} { - global query_result_list - - set ok 0 - set found "" - - set query_result_list [split_query $query] - - foreach q $query_result_list { - # XXX following will crash if $item is not a good regexp - # need to protect it \Q$item\E style... -# if {[regexp "^$item:" $q]} { -# set found $q -# } - if {[string first "$item:" $q] == 0} { - set found $q - } - if {$q == $expected} { - set ok 1 - if {$found != ""} { - break; - } - } - } - if {$found == ""} { - set msg $query - regsub {^a..=} $msg {} msg - if {[string length $msg] > 60} { - set msg [string range $msg 0 60] - } - } else { - set msg $found - } - if {!$ok && $found != ""} { - # check for floating point match: - set v1 "" - set v2 "" - regexp {:([0-9.][0-9.]*)$} $found m0 v1 - regexp {:([0-9.][0-9.]*)$} $expected m0 v2 - if {$v1 != "" && $v2 != ""} { - set diff "" - catch {set diff [expr "$v1 - $v2"]} - if {$diff != ""} { - if {$diff < 0} { - set diff [expr "0.0 - $diff"] - } - if {$diff < 0.00001} { - set ok 1 - } - } - } - } - if {$ok} { - append_text "\tSet OK ($msg)\n" - return 1 - - } elseif {[opt_match P $item] && [regexp {:(-|\+)} $expected]} { - # e.g. blackout:+30x30+20+20 - append_text "\t($msg)\n" - return 1 - } elseif {[regexp {:[0-9]\.[0-9]} $expected]} { - append_text "\t($msg)\n" - return 1 - } elseif {$item == "connect" || $item == "disconnect" - || $item == "client" || $item == "client_input"} { - append_text "\t($msg)\n" - return 1 - } elseif {$item == "passwd" || $item == "viewpasswd"} { - append_text "\t($msg)\n" - return 1 - } else { - append_text "\t*FAILED* $msg\n" - return 0 - } -} - -proc get_default_vars {} { - global default_var env - - set qry [all_query_vars] - - append qry ",vncconnect" - - set q "" - set i 0 - set all "" - foreach s [split $qry ","] { - if {$q != ""} { - append q "," - } - append q $s - incr i - if {$i > 50} { - set qargs [list "-QD" $q] - set a [run_remote_cmd $qargs] - if [info exists env(TKX11VNC_PRINT_ALL_QD)] { - puts $q - puts $a - puts "---------------" - } - if {$all != ""} { - append all "," - } - append all $a - set q "" - set i 0 - } - } - if {$q != ""} { - set qargs [list "-QD" $q] - set a [run_remote_cmd $qargs] - if [info exists env(TKX11VNC_PRINT_ALL_QD)] { - puts $q - puts $a - puts "---------------" - } - if {$all != ""} { - append all "," - } - append all $a - } - -# old way, qry too long... -# set qargs [list "-QD" $qry] -# set all [run_remote_cmd $qargs] - - if {[regexp {ans=} $all]} { - #append_text "Retrieved all default settings.\n" - } else { - #append_text "Failed to retrieve default settings.\n" - } - - set query_result_list [split_query $all] - - set default_var(gui) "" - - foreach piece $query_result_list { - if {[regexp {^([^:][^:]*):(.*)$} $piece m0 item val]} { - if {$val == "N/A"} { - if {$item == "vncconnect"} { - set val 1 - } else { - set val "" - } - } - if {$item == "display"} { - set val "" - } elseif {$item == "desktop"} { - set val "" - } elseif {$item == "auth"} { - set val "" - } elseif {$item == "gui"} { - continue - } - # some hacks we do here for now.. - if {$item == "cursor" && $val == ""} { - set val "most" - } elseif {$item == "scrollcopyrect" && $val == ""} { - set val "always" - } elseif {$item == "wirecopyrect" && $val == ""} { - set val "always" -# } elseif {$item == "overlay_nocursor" && $val == 0} { -# set val 1 - } - - set default_var($item) $val -#puts "default: $item -> $val" - } - } -} - -proc tilde_expand {file} { - global env - if {[file exists $file]} { - return $file - } - - set user "" - if {[info exists env(USER)]} { - set user $env(USER) - } - if {$user == "" && [info exists env(LOGNAME)]} { - set user $env(LOGNAME) - } - - set home "" - if {[info exists env(HOME)]} { - set home $env(HOME) - } elseif {$user != ""} { - set home "/home/$user" - } - - if {[regexp {^~} $file]} { - if {[regexp {^~/} $file]} { - if {$home != ""} { - regsub {^~} $file $home file - } - } else { - regsub {^~} $file "/home/" file - } - } - return $file -} - -proc insert_cmdline_vars {} { - global env cmd_var menu_var default_var x11vnc_cmdline - if {![info exists x11vnc_cmdline]} { - return - } - if {$x11vnc_cmdline == ""} { - return - } - set cmd_var(novar) 1 - set str [string trim $x11vnc_cmdline] - - while {[regexp -- {^-} $str]} { - if {[regexp -- {^--*([^ \t][^ \t]*)(.*)$} $str m var rest]} { - set rest [string trim $rest] - set var [string trim $var] - if {[regexp {^\{\{([^\}]*)\}\}(.*)} $rest m val rest]} { - set str [string trim $rest] - set cmd_var($var) $val - } else { - set str $rest - set cmd_var($var) "boolean" - } - } else { - break - } - } - - if {[info exists cmd_var(rc)]} { - load_settings $cmd_var(rc) - } elseif {[info exists cmd_var(norc)]} { - ; - } else { - set filex [tilde_expand "~/.x11vncrc"] - if {[file exists $filex]} { - load_settings $filex - } - } - - foreach var [array names cmd_var] { - if {$var == "novar"} { - continue - } - if {[regexp {^[ \t]*$} $var]} { - continue - } - if {[info exists menu_var($var)]} { - if {$cmd_var($var) == "boolean"} { - set menu_var($var) 1 - } else { - set menu_var($var) $cmd_var($var) - } - } - } -} - -proc copy_default_vars {} { - global menu_var default_var - foreach item [array names default_var] { - if {[info exists menu_var($item)]} { - if {[info exists default_var($item)]} { - set menu_var($item) $default_var($item) - } - } - } - foreach item [array names menu_var] { - if {[info exists default_var($item)]} { - set menu_var($item) $default_var($item) - } - } -} - -proc update_menu_vars {{query ""}} { - global all_settings menu_var query_result_list - global x11vnc_icon_mode - - set debug [in_debug_mode] - - if {$query == "USE_LIST"} { - ; - } elseif {$query == ""} { - set query_result_list [split_query $all_settings] - } else { - set query_result_list [split_query $query] - } - - foreach piece $query_result_list { -#puts stderr "UMV: $piece" - if [regexp {icon_mode:0} $piece] { - set x11vnc_icon_mode 0 - #puts stderr "x11vnc_icon_mode: $x11vnc_icon_mode" - } - if [regexp {icon_mode:1} $piece] { - set x11vnc_icon_mode 1 - #puts stderr "x11vnc_icon_mode: $x11vnc_icon_mode" - } - # XXX ipv6 - if {[regexp {^([^:][^:]*):(.*)$} $piece m0 item val]} { - if {[info exists menu_var($item)]} { - set old $menu_var($item) -#puts stderr " $old" - if {$val == "N/A"} { - continue - } - set menu_var($item) $val - } - if {$item == "clients"} { - update_clients_menu $val - } elseif {$item == "display"} { - set_x11_display $val - } elseif {$item == "vncdisplay"} { - set_vnc_display $val - } elseif {$item == "http_url"} { - set_vnc_url $val - } - } - } -} - -proc load_settings {{file ""}} { - global menu_var default_var env - - if {$file == ""} { - if {![info exists menu_var(load-settings)]} { - return - } - set file $menu_var(load-settings) - } - if {$file == ""} { - return - } - - set fh "" - set filex [tilde_expand $file] - catch {set fh [open $filex "r"]} - - if {$fh == ""} { - append_text "load_settings: *** failed to open $filex ***\n" - return - } - copy_default_vars - - set str "" - while {[gets $fh line] > -1} { - regsub -all {\\#} $line {__QUOTED_HASH__} line - if {[regexp {^[ \t]*#} $line]} { - continue - } - for {set i 0} {$i < 5} {incr i} { - regsub {#.*$} $line "" line - } - if {[regexp {^[ \t]*$} $line]} { - continue - } - regsub -all {__QUOTED_HASH__} $line {#} line - if {[regexp {\\$} $line]} { - regsub {\\$} $line " " line - append str "$line" - } else { - append str "$line\n" - } - } - close $fh - - set count 0 - set parms "" - - foreach line [split $str "\n"] { - set line [string trim $line] - regsub {^--*} $line "" line - regsub -all {[ \t][ \t]*} $line " " line - set list [split $line] - set item [lindex $list 0] - set value [lindex $list 1] - if {[regexp {^[ \t]*$} $item]} { - continue - } - if {$item == "gui"} { - continue - } - if {[info exists menu_var($item)]} { - if {[value_is_bool $item]} { - set menu_var($item) 1 - incr count - append parms " -$item\n" - } elseif {[value_is_string $item]} { - if {$value != ""} { - set menu_var($item) $value - set nitem [get_nitem $item] - append parms " -$nitem $value\n" - incr count - } - } - } - } - append_text "loaded $count parameter settings from $filex" - if {$count > 0} { - append_text ":\n" - append_text $parms - } else { - append_text ".\n" - } -} - -proc save_settings {} { - set rc_text [get_settings_rcfile] - - set top "# -# This file is based on the current x11vnc settings and can be used as -# as a ~/.x11vncrc defaults file. If saved to another filename, these -# settings can be passed to x11vnc at startup via \"-rc <filename>\". -# -# The rc file comment character is \"#\". Use \"\\#\" for the literal char. -# You can continue lines using \"\\\" as the last character of a line. -# -# Lines beginning with \"#d\" indicate the parameter value is at its default -# setting and you probably want to leave it commented out. -# -# Lines beginning with \"#?\" indicate parameters you probably do not -# want to hardwire to the current setting (uncomment if you want that). -# -# Some parameters are boolean, e.g. -forever, and take no value; while -# the others, e.g. -wait 50, take a string or numerical value. -# -# For booleans, the line will end with comment \"default: on\" or -# \"default: off\" indicating the default setting. (Note: often -# \"-nofoobar\" corresponds to option \"-foobar\" and the former is -# \"the default\", e.g. -norepeat). -# -# For string or numerical options, the value \"\" in a line below -# means the default is unset and you will need to supply some non-empty -# value to use the parameter. For reference, if the default differs -# from your value it placed at the end of the line as a comment. -# -# Feel free to uncomment or comment any of the lines or to change any -# of the values of the parameters. Don't be surprised that most if not -# all of the lines below are commented out (x11vnc has so many parameters, -# most of them will be at their default values). -#------------------------------------------------------------------------- - -" - - set rc_text "$top$rc_text" - - global env save_settings_var save_settings_var_ok - if {[info exists env(HOME)]} { - set save_settings_var "$env(HOME)/.x11vncrc" - } else { - set save_settings_var ".x11vncrc" - } - set save_settings_var_ok 0 - - set w [textwin "save_settings" "Save Settings..." $rc_text \ - "save_settings_var+Save as:"] - - tkwait window $w - - if {$save_settings_var_ok == 1} { - set file $save_settings_var - if {$file == ""} { - return - } - set file [tilde_expand $file] - append_text "\nSaving current settings to $file ...\n" - if {[file exists $file]} { - set backup "${file}~" - append_text "Backing up $file -> $backup ...\n" - catch {file delete -force $backup} - set emsg "*** Backup to $backup failed. ***\n" - if {![file exists $backup]} { - catch {file copy -force $file $backup} - if {![file exists $backup]} { - append_text $emsg - bell - } - } else { - append_text $emsg - bell - } - } - set fh "" - catch {set fh [open $file "w"]} - if {$fh != ""} { - puts $fh $rc_text - close $fh - if {![file exists $file]} { - append_text "*** Saving to $file failed. ***\n" - bell - } else { - append_text "Done.\n" - } - } else { - append_text "*** Open of $file failed. ***\n" - bell - } - } -} - -proc clear_all {} { - global menu_var unset_str - - set debug [in_debug_mode] - - foreach item [array names menu_var] { - if {$item == "debug_gui"} { - continue - } - if {[info exists menu_var($item)]} { - if {[is_action $item]} { - set menu_var($item) "" - } elseif {[value_is_bool $item]} { - set menu_var($item) 0 - } elseif {[value_is_string $item]} { - set menu_var($item) $unset_str - } - } - } - append_text "Cleared all settings.\n" -} - -proc defaults_all {} { - copy_default_vars - append_text "Reset all variables to default values.\n" -} - -proc all_query_vars {} { - global query_ans_list query_aro_list all_settings - global cache_all_query_vars - - if {$cache_all_query_vars != ""} { - return $cache_all_query_vars - } - - set qry "" - foreach item $query_ans_list { - if {$qry == ""} { - set qry $item - } else { - append qry ",$item" - } - } - foreach item $query_aro_list { - if {$qry == ""} { - set qry $item - } else { - append qry ",$item" - } - } - set cache_all_query_vars $qry - - global env - if [info exists env(TKX11VNC_PRINT_ALL_VARS)] { - puts "--------------- BEGIN ALL VARS ---------------" - puts $qry - puts "--------------- END ALL VARS ---------------" - } - - return $qry -} - -proc query_all {{quiet 0}} { - global query_ans_list query_aro_list all_settings - global last_query_all_time - - dtime 1 - set qry [all_query_vars] - - set qargs [list "-Q" $qry] - set all [run_remote_cmd $qargs] - - if {[regexp {ans=} $all]} { - if {! $quiet} { - append_text "Retrieved all current settings.\n" - } - set all_settings $all - update_menu_vars $all - } else { - if {! $quiet} { - append_text "Failed to retrieve current settings.\n" - } - } - set last_query_all_time [clock seconds] - dtime 2 - return $all -} - -proc set_info {str} { - global info_str info_label -#set w1 [$info_label cget -width] -#set w2 [winfo width $info_label] -#puts "set_info: w=$w1 winfo=$w2" -#append_text "$str\n" - set info_str "$str" - update -} - -proc append_text {str} { - global text_area text_area_str - - if {![info exists text_area_str]} { - set text_area_str "" - } - append text_area_str $str - - if {![info exists text_area]} { - puts stderr $str - return - } - if {$text_area == ""} { - puts stderr $str - return - } - if {![winfo exists $text_area]} { - puts stderr $str - return - } - - $text_area insert end $str - $text_area see end -} - -proc show_all_settings {} { - global all_settings - global client_sock client_tail - global x11vnc_client_file - - set txt "\nRead-Write settings:\n\n" - foreach item [split_query $all_settings] { - regsub {:} $item {: } item - append txt " $item\n" - if {[regexp {noremote} $item]} { - append txt "\nRead-Only settings:\n\n" - } - } - append txt "\nInternal settings:\n\n" - append txt "x11vnc_client_file: $x11vnc_client_file\n" - if {[info exists client_tail]} { - append txt "client_tail: $client_tail\n" - } else { - append txt "client_tail: unset\n" - } - if {[info exists client_sock]} { - append txt "client_sock: $client_sock\n" - } else { - append txt "client_sock: unset\n" - } - set estr "" - catch {set estr [exec env | grep -i X11VNC]} - append txt "$estr\n" - textwin "Settings" "All Current Settings" $txt -} - -proc show_logfile {} { - global menu_var unset_str - - set logfile [tilde_expand $menu_var(logfile)] - - if {$logfile == "" || $logfile == $unset_str} { - set txt "\nNo logfile was specified at x11vnc startup.\n\n" - } elseif {![file exists $logfile]} { - set txt "\nLogfile \"$logfile\" does not exist.\n\n" - } else { - set fh "-3" - set err "" - catch {set fh [open $logfile "r"]} err - if {$fh == "-3"} { - set txt "\nError opening \"$logfile\" $err.\n\n" - } else { - set txt "\nLogfile \"$logfile\" current contents:\n" - while {[gets $fh line] > -1} { - append txt "$line\n" - } - close $fh - } - } - textwin "Logfile" "Logfile" $txt -} - -proc tail_logfile {} { - global menu_var unset_str ffont - set logfile $menu_var(logfile) - - set txt "" - if {$logfile == "" || $logfile == $unset_str} { - set txt "\nNo logfile was specified at x11vnc startup.\n\n" - } elseif {![file exists $logfile]} { - set txt "\nLogfile \"$logfile\" does not exist.\n\n" - } else { - set cmd "" - set xterm_cmd "xterm -sb -fn $ffont -geometry 80x45 -title x11vnc-logfile -e" - set cmd [split $xterm_cmd] - lappend cmd "tail" - lappend cmd "-3000f" - lappend cmd $logfile - lappend cmd "&" - catch {[eval exec $cmd]} - } - if {$txt != ""} { - textwin "Logfile" "Logfile" $txt - } -} - -proc set_connected {yesno} { - global connected_to_x11vnc - set orig $connected_to_x11vnc - - if {$yesno == "yes"} { - set connected_to_x11vnc 1 - } else { - set connected_to_x11vnc 0 - no_x11_display - no_vnc_display - } - if {$orig != $connected_to_x11vnc} { - set_widgets - } -} - -proc detach_from_display {} { - global connected_to_x11vnc reply_xdisplay x11vnc_xdisplay - set str "Detaching from X display." - if {$reply_xdisplay != ""} { - set str "Detaching from $reply_xdisplay." - } elseif {$x11vnc_xdisplay != ""} { - set str "Detaching from $x11vnc_xdisplay." - } - if {$connected_to_x11vnc} { - append_text "$str\n" - } - set_connected no -} - -proc do_stop_quit {} { - push_new_value "stop" "stop" 1 0 - set_connected no - update - after 250 - destroy . -} - -# Menu item is an action: -proc do_action {item} { - global menu_var connected_to_x11vnc beginner_mode - - if {[in_debug_mode]} { - append_text "action: \"$item\"\n" - } -#puts "action: \"$item\"\n" - - if {$item == "ping"} { - if {$beginner_mode} { - try_connect_and_query_all - } else { - try_connect - } - return - } elseif {$item == "start"} { - start_x11vnc - return - } elseif {$item == "detach"} { - detach_from_display - return - } elseif {$item == "attach"} { - try_connect_and_query_all - return - } elseif {$item == "update-all"} { - query_all - return - } elseif {$item == "clear-all"} { - clear_all - return - } elseif {$item == "defaults-all"} { - defaults_all - return - } elseif {$item == "save-settings"} { - save_settings - return - } elseif {$item == "show-start-cmd"} { - show_start_cmd - return - } elseif {$item == "all-settings"} { - show_all_settings - return - } elseif {$item == "show-logfile"} { - show_logfile - return - } elseif {$item == "tail-logfile"} { - tail_logfile - return - } elseif {$item == "Misc-Tuning:"} { - menu_help "$item" - return - } elseif {$item == "WindowView"} { - change_view_state - return - } elseif {$item == "quit" || $item == "Quit"} { - destroy . - exit 0 - } elseif {$item == "stop+quit"} { - do_stop_quit - } - - if {[value_is_string $item]} { - if {! [entry_dialog $item]} { - return - } - set new $menu_var($item) - set name $item - } else { - set new 1 - set name $item - } - - if {$item == "load-settings"} { - load_settings - return - } - - if {! $connected_to_x11vnc} { - ; - } elseif {[regexp {^(stop|quit|exit|shutdown)$} $item]} { - # just do -R - append_text "stopping remote x11vnc server...\n" - push_new_value $item $name $new 0 - set_connected no - - } elseif {[opt_match Q $item]} { - push_new_value $item $name $new 1 - } else { - push_new_value $item $name $new 0 - } -} - -proc ptime {time} { - set usec [lindex [split $time] 0] - set sec [format "%.3f" [expr "$usec / 1000000.0"]] - puts "time: $sec secs." -} - -proc do_var {item} { - global connected_to_x11vnc item_cascade menu_var - - set debug [in_debug_mode] - - set string 0 - if {[is_action $item] || $item == "WindowView"} { - # Menu item is action: - if {$debug} { - ptime [time {do_action $item}] - } else { - do_action $item - } - return - } - - if {[value_is_string $item]} { - # Menu item is a string: - if {$item_cascade($item) != ""} { - # Cascade sets variable automatically - } else { - # Otherwise Entry box - if {![entry_dialog $item]} { - return - } - } - set new $menu_var($item) - set name $item - } else { - # Menu item is a boolean: - set name [check_var $item] - if {$name == ""} { - return - } - set new 1 - } - if {$connected_to_x11vnc} { - if {$debug} { - ptime [time {push_new_value $item $name $new 1}] - } else { - push_new_value $item $name $new 1 - } - - if {$item == "http"} { - global vnc_url - append_text " URL: $vnc_url\n" - } - } -} - -proc menu_help {item} { - if ![help_win $item] { - textwin "nohelp" "No help available" \ - "Sorry, no help avaiable for \"$item\"" - } -} - -proc opt_match {c item} { - global item_opts - if {[info exists item_opts($item)]} { - if {[regexp "^\[A-z\]*$c" $item_opts($item)]} { - return 1 - } - } - return 0 -} - -proc is_action {item} { - return [opt_match A $item] -} - -proc is_gui_internal {item} { - if {$item == "Properties"} { - return 1 - } - if {$item == "Tray"} { - return 1 - } - return [opt_match G $item] -} - -proc is_browse {item} { - return [opt_match F $item] -} - -proc value_is_string {item} { - global item_bool - if {![info exists item_bool($item)]} { - return 0 - } - if {! $item_bool($item)} { - return 1 - } else { - return 0 - } -} - -proc value_is_bool {item} { - global item_bool - if {![info exists item_bool($item)]} { - return 0 - } - if {$item_bool($item)} { - return 1 - } else { - return 0 - } -} - -proc split_query0 {query} { - # original slower way with regexp/regsub - regsub -all {aro=} $query {ans=} query - set items {} - while {1} { - if {! [regexp {^ans=(.*)$} $query m0 m1]} { - break - } - set item $m1 - set m2 "" - regexp {,ans=.*$} $item m2 - regsub {,ans=.*$} $item "" item - if {$item != ""} { - lappend items $item - } - set query $m2 - regsub {^,} $query "" query - } - return $items -} - -proc split_query {query} { - regsub -all {aro=} $query {ans=} query - set items {} - while {1} { - set n [string first "ans=" $query] - if {$n < 0} { - break - } - set from [expr $n+4] - - set m [string first ",ans=" $query] - if {$m < 0} { - set more 0 - set item [string range $query $from end] - } else { - set more 1 - set to [expr $m-1] - set item [string range $query $from $to] - } - if {$item != ""} { - lappend items $item - } - if {$more} { - incr m - set query [string range $query $m end] - } else { - set query "" - } - } - return $items -} - -proc set_x11_display {name} { - global x11_display - set x11_display "x11vnc X display: $name" - set_name "tkx11vnc - $name" -} -proc set_vnc_display {name} { - global vnc_display icon_mode - set vnc_display "VNC display: $name" - - if {$icon_mode} { - set_icon_label - } -} -proc set_vnc_url {name} { - global vnc_url - set vnc_url $name -} -proc no_x11_display {} { - set_x11_display "(*none*)" - set_name "tkx11vnc" -} -proc no_vnc_display {} { - set_vnc_display "(*none*)" -} -proc no_vnc_url {} { - set_vnc_url "(*none*)" -} - -proc get_vnc_display_number {} { - global vnc_display - if ![info exists vnc_display] { - return "none" - } - if {$vnc_display == ""} { - return "none" - } - set str $vnc_display - regsub {VNC display: *} $str "" str - if [regexp {:([0-9][0-9]*)} $str m0 n] { - return $n - } - return "none" -} - -proc fetch_displays {} { - - set qargs [list "-Q" "display,vncdisplay"] - set result [run_remote_cmd $qargs] - - set got_x11 0 - set got_vnc 0 - set got_url 0 - - foreach item [split_query $result] { - if {[regexp {^display:(.*)$} $item m0 m1]} { - set_x11_display $m1 - set got_x11 1 - } elseif {[regexp {^vncdisplay:(.*)$} $item m0 m1]} { - set_vnc_display $m1 - set got_vnc 1 - } elseif {[regexp {^http_url:(.*)$} $item m0 m1]} { - set_vnc_url $m1 - set got_url 1 - } - } - if {! $got_x11} { - no_x11_display - } - if {! $got_vnc} { - no_vnc_display - } - if {! $got_url} { - no_vnc_url - } -} - -proc client_dialog {client} { - set cid "" - set host "" - set ip "" - global menu_var text_area cleanup_window item_bool - - #<id>:<ip>:<port>:<user>:<unix>:<hostname>:<input>:<loginview>:<time> - append_text "\nClient info string:\n - $client\n\n" - if {[regexp {^(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*)$} \ - $client m0 m1 m2 m3 m4 m5 m6 m7 m8 m9]} { - set cid $m1 - set ip $m2 - set port $m3 - set user $m4 - set unix $m5 - set host $m6 - regsub {\..*$} $host "" host - set input $m7 - set logvo $m8 - set ltime $m9 - append_text "Host: $host, Port: $port, User: $user" - if {$unix != "" && $unix != "none"} { - append_text ", Unix: $unix" - } - append_text ", IP: $ip, Id: $cid\n" - append_text " - originally logged in as: " - if {$logvo == "1" } { - append_text "View-Only Client" - } else { - append_text "Normal Client" - } - if {$ltime != ""} { - set tim [clock format $ltime] - append_text ", $tim" - } - append_text "\n" - append_text " - currently allowed input: " - set sk 0 - set sm 0 - set sb 0 - set sc 0 - set sf 0 - if {[regexp -nocase {K} $input]} { - append_text "Keystrokes" - set sk 1 - } - if {[regexp -nocase {M} $input]} { - if {$sk} { - append_text ", " - } - append_text "Mouse-Motion" - set sm 1 - } - if {[regexp -nocase {B} $input]} { - if {$sk || $sm} { - append_text ", " - } - append_text "Button-Click" - set sb 1 - } - if {[regexp -nocase {C} $input]} { - if {$sk || $sm || $sb} { - append_text ", " - } - append_text "Clipboard" - set sm 1 - } - if {[regexp -nocase {F} $input]} { - if {$sk || $sm || $sb || $sf} { - append_text ", " - } - append_text "Files" - set sf 1 - } - if {! $sk && ! $sm && ! $sb && ! $sm && ! $sf} { - append_text "None" - } - append_text "\n" - } - if {$cid == ""} { - append_text "Invalid client info string: $client\n" - return - } - - regsub -all {_} $input "" input - set menu_var(client) "$input" - set item_bool(client) 0 - - insert_client_action_window $input - set rc [entry_dialog client 1] - - cleanup_text_window - - set val $menu_var(client) - #puts "rc: $rc val: $val" - - if {! $rc} { - return; - } elseif {[regexp -nocase {(disconnect|close)} $val]} { - disconnect_dialog $client - } else { - regsub -all -nocase {[^KMBCF]} $val "" val - set item_bool(client_input) 0 - push_new_value "client_input" "client_input" "$cid:$val" 0 - } -} - -proc disconnect_dialog {client} { - set cid "" - set host "" - set msg "\n" - append msg "*** Client info string:\n $client\n" - if {[regexp {^(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*)$} \ - $client m0 m1 m2 m3 m4 m5 m6 m7 m8 m9]} { - set cid $m1 - set ip $m2 - set port $m3 - set user $m4 - set unix $m5 - set host $m6 - regsub {\..*$} $host "" host - set input $m7 - set logvo $m8 - set ltime $m9 - append_text "Host: $host, Port: $port, IP: $ip, User: $user" - if {$unix != "" && $unix != "none"} { - append_text ", Unix: $unix" - } - append_text ", Id: $cid\n" - } - if {$cid == ""} { - append_text "Invalid client info string: $client\n" - return - } - append msg "*** To *DISCONNECT* this client press \"OK\" again, otherwise press \"Cancel\"\n" - bell - if {[warning_dialog $msg "current"]} { - push_new_value "disconnect" "disconnect" $cid 1 - } else { - append_text "disconnect cancelled.\n" - } -} - -proc update_clients_and_repost {} { - global item_cascade menu_m menu_b - - append_text "Refreshing connected clients list... " - query_all 1 - update - - set saw 0 - set casc $item_cascade(current) - set last [$casc index end] - for {set i 0} {$i <= $last} {incr i} { - if {[$casc type $i] == "separator"} { - continue - } - set name [$casc entrycget $i -label] - if {[regexp {^num-clients} $name]} { - continue - } - if {[regexp {^refresh-list} $name]} { - continue - } - if {! $saw} { - append_text "\n" - } - set saw 1 - append_text "client: $name\n" - } - if {! $saw} { - append_text "done.\n" - } -} - -proc update_clients_menu {list} { - global item_cascade ffont - global saved_clients_str - - if {![info exists saved_clients_str]} { - set saved_clients_str "" - } - if {$list == "INIT"} { - set list $saved_clients_str - } else { - set saved_clients_str $list - } - - set subm $item_cascade(current); - catch {destroy $subm} - menu $subm -tearoff 0 -font $ffont - $subm add command - $subm add command -label "refresh-list" \ - -command "update_clients_and_repost" - $subm add separator - set count 0 - foreach client [split $list ","] { - if {![regexp {^[a-z0-9]*[a-z0-9]:} $client]} { - #append_text "Skipping client line: " - #append_text $client - #append_text "\n" - continue - } - regsub -all {[{}()~!$&*|;'"`{}<>\[\]]} $client "" client - #' - if {[regexp {^(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*)$} \ - $client m0 m1 m2 m3 m4 m5 m6 m7 m8 m9]} { - set id $m1 - set user $m4 - set unix $m5 - set host $m6 - regsub {\..*$} $host "" host - set clabel "$host $id" - if {$unix != "" && $unix != "none"} { - set clabel "$unix@$clabel" - } elseif {$user != "unknown-user"} { - set clabel "$user@$clabel" - } - } else { - regsub {:.*$} $client "" clabel - } - $subm add command -label "$clabel" \ - -command "client_dialog \{$client\}" - incr count - } - $subm entryconfigure 0 -label "num-clients: $count" -} - -proc set_widgets {} { - global connected_to_x11vnc item_case item_menu item_entry menu_m - - foreach item [array names item_case] { - if ![info exists item_case($item)] { continue; } - set case $item_case($item) - if ![info exists item_menu($item)] { continue; } - set menu $item_menu($item) - if ![info exists item_entry($item)] { continue; } - set entry $item_entry($item) - if {$entry < 0} { - # skip case under beginner_mode - continue - } - set type [$menu type $entry] - if {$type == "separator" || $type == "tearoff"} { - continue - } - if {![winfo exists $menu]} { - continue - } - if {$connected_to_x11vnc} { - if {[active_when_connected $item]} { - $menu entryconfigure $entry -state normal - } else { - $menu entryconfigure $entry -state disabled - } - } else { - if {[active_when_starting $item]} { - $menu entryconfigure $entry -state normal - } else { - $menu entryconfigure $entry -state disabled - } - } - } -} - -proc toggle_simple_gui {} { - global beginner_mode simple_gui_created - global connected_to_x11vnc make_gui_count - - if {$beginner_mode} { - append_text "\nSwitching to simple-gui mode.\n" - } else { - append_text "\nSwitching to power-user gui mode.\n" - } - - if {$make_gui_count == 1} { - incr make_gui_count - } - set simple_gui_created 1 - make_menu_items - set_widgets - set_internal_help - append_text "\n" -} - -proc little_qs {m} { - global bfont ffont beginner_mode - global helpremote helptext helplabel - global tk_version osname - - if {$tk_version < 8.0} { - return - } - if {$osname == "Darwin"} { - return - } - - set n [$m index end] - - for {set i 0} {$i <= $n} {incr i} { - set type [$m type $i] -#puts "$m - $i - $type" - if {$type == "separator"} { - $m add separator - } elseif {$type == "tearoff"} { - continue; - } else { - set label [$m entrycget $i -label] - set str "" - if {[info exists helpremote($label)]} { - set str "(?)" - } elseif {[info exists helptext($label)]} { - set str "(?)" - } - $m add command -label $str \ - -font $ffont \ - -command "menu_help $label"; - - if {$str == ""} { - $m entryconfigure end -state disabled - } - set arg "$m,$i" -#puts "helplabel: $arg -> $label" - set helplabel($arg) $label - set j [$m index end] - set arg "$m,$j" - set helplabel($arg) $label - } - if {$i == 0} { - $m entryconfigure end -columnbreak 1 - } - } - - menu_bindings $m -} - -proc make_menu_items {} { - global template - global menu_b menu_m menu_count - global item_opts item_bool item_case item_menu item_entry menu_var unset_str - global item_cascade - global bfont ffont beginner_mode simple_gui_created - global helptext helpremote helplabel - - # some tweaks... - if {![info exists menu_var(deny)]} { - set menu_var(deny) 0 - } - - set case ""; - set L_casc "" - set L_casc_count 0 - set L_menus [list] - - # Extract the menu items: - foreach line [split $template "\n"] { - if {[regexp {^Row:} $line]} { - continue - } - if {[regexp {^[A-z]} $line]} { - set case [string trim $line] - - if {$simple_gui_created} { - set i0 0 - #if {$case == "Misc"} { # kludge for simple_gui - # set i0 1 - #} - catch {$menu_m($case) delete $i0 end} - } - set menu_count($case) 0 - continue; - } - - set item [string trim $line] - regsub -all { *} $item " " item - if {$item == ""} { - continue; - } - set opts "" - if {[regexp {^=} $item]} { - set opts [lindex [split $item] 0] - regsub {^=} $opts "" opts - set item [lindex [split $item] 1] - } - if {[regexp {^0} $opts]} { - continue; - } - if {[regexp {:$} $item]} { - set bool 0 - } else { - set bool 1 - } - regsub {:$} $item {} item - - if {$item == "LOFF"} { - set L_casc "" - continue - } - - if {$item == "-- D"} { - set beginner_sep 1 - set item "--" - } else { - set beginner_sep 0 - } - - set item_opts($item) $opts - set item_case($item) $case - set item_bool($item) $bool - set item_cascade($item) "" - - if {$L_casc == ""} { - set item_entry($item) $menu_count($case) - set m $menu_m($case) - } else { - # hack for cascades for crowded menus. See =GAL opts. - set item_entry($item) $L_casc_count - set m $L_casc - } - - set mvar 0 - - if {$beginner_mode && ! $beginner_sep && ![opt_match D $item]} { - set item_entry($item) "-1" - continue; - } - - set item_menu($item) $m - - if {0} { puts "ITEM: $item\t- $opts\t- $case\t- \ - $bool\t- $menu_count($case)" } - - # Create the menu items, its variables, etc., etc. - - if {$item == "--"} { - $m add separator - - } elseif {$item == "Quit"} { - # Quit item must shut us down: - $m add command -label "$item" -underline 0 \ - -font $ffont \ - -command {destroy .; exit 0} - - } elseif {$case == "Help"} { - # Help is simple help: - $m add command -label "$item" \ - -font $ffont \ - -command "menu_help $item" - - } elseif {[opt_match L $item]} { - # Special sub-menu cascade (=GAL ends with LOFF) - set subm $m.casc_L$menu_count($case) - catch {destroy $subm} - menu $subm -tearoff 0 -font $ffont - set item_cascade($item) $subm - $m add cascade -label "$item" \ - -font $ffont \ - -menu $subm - set L_casc $subm - set L_casc_count -1 - lappend L_menus $L_casc - - } elseif {$item == "current"} { - # Current clients cascade - set subm $m.current_cascade - catch {destroy $subm} - set item_cascade($item) $subm - update_clients_menu "INIT" - $m add cascade -label "$item" \ - -font $ffont \ - -menu $subm - - } elseif {[is_action $item]} { - # Action - $m add command -label "$item" \ - -font $ffont \ - -command "do_var $item" - if {![info exists menu_var($item)]} { - set menu_var($item) ""; # for convenience - } - - } elseif {! $item_bool($item)} { - # String - if {[regexp -- {-C:(.*)} $item_opts($item) m0 m1]} { - # Radiobutton select - set subm $m.radio_cascade$menu_count($case) - catch {destroy $subm} - menu $subm -tearoff 0 -font $ffont - foreach val [split $m1 ","] { - $subm add radiobutton -label "$val" \ - -command "do_var $item" \ - -value "$val" \ - -font $ffont \ - -variable menu_var($item) - } - $m add cascade -label "$item" \ - -font $ffont \ - -menu $subm - set item_cascade($item) $subm - } else { - # Arbitrary_string - $m add command -label "$item" \ - -font $ffont \ - -command "do_var $item" - } - set mvar 1 - - } elseif {$item == "simple-gui"} { - $m add checkbutton -label "$item" \ - -command "toggle_simple_gui" \ - -font $ffont \ - -variable beginner_mode - } else { - # Boolean - $m add checkbutton -label "$item" \ - -command "do_var $item" \ - -font $ffont \ - -variable menu_var($item) - if {![info exists menu_var($item)]} { - set menu_var($item) 0 - } - } - - if {$L_casc_count == -1} { - incr menu_count($case) - incr L_casc_count - } elseif {$L_casc != ""} { - incr L_casc_count - } else { - incr menu_count($case) - } - - if {$mvar} { - if {![info exists menu_var($item)]} { - set menu_var($item) $unset_str - } - } - } - - # Now make the little "(?)" help buttons - global osname - foreach case [array names menu_m] { - if {$case == "Help"} { - continue; - } - little_qs $menu_m($case); - } - foreach m $L_menus { - little_qs $m - } -} - -proc check_update_vars {} { - global last_query_all_time query_all_freq icon_mode - global connected_to_x11vnc client_tail client_sock - - set now [clock seconds] - - set delay $query_all_freq - if {$client_tail != "" && $client_sock == ""} { - set delay [expr 2 * $query_all_freq] - } - - if {$connected_to_x11vnc} { - set quiet 0 - set refresh [expr "$last_query_all_time + $delay"] - - # puts "menu_posted $now $last_query_all_time" - # puts "menu_posted $refresh" - - if {$now > $refresh} { - append_text "Refreshing current settings... " - query_all $quiet - if {$quiet} { - append_text "done\n" - } - } - } -} - -proc menu_posted {} { - check_update_vars -} - -proc props_widgets {state} { - global props_buttons - foreach w $props_buttons { - $w configure -state $state - } - update -} - -proc props_apply {} { - global props_accept props_confirm props_viewonly props_shared - global props_zeroconf props_javaview props_solid - global props_passwd props_viewpasswd - global prop0_accept prop0_confirm prop0_viewonly prop0_shared - global prop0_zeroconf prop0_javaview prop0_solid - global prop0_passwd prop0_viewpasswd - global menu_var - global client_sock - - props_widgets disabled - - set aft 500 - if {[info exists client_sock]} { - if {$client_sock != ""} { - set aft 150 - } - } - set did 0 - - set fail 0 - - if {$props_confirm != $prop0_confirm} { - if {$did > 0} {after $aft}; incr did - if {$props_confirm} { - push_new_value "accept" "accept" "popup" 1 - } else { - push_new_value "accept" "accept" "" 1 - } - if {$menu_var(accept) == "popup"} { - set props_confirm 1 - } elseif {$menu_var(accept) == ""} { - set props_confirm 0 - } - if {$props_confirm == $prop0_confirm} {incr fail} - set prop0_confirm $props_confirm - } - - if {$props_viewonly != $prop0_viewonly} { - if {$did > 0} {after $aft}; incr did - if {$props_viewonly} { - push_new_value "viewonly" "viewonly" 1 1 - } else { - push_new_value "viewonly" "noviewonly" 1 1 - } - if {$menu_var(viewonly)} { - set props_viewonly 1 - } else { - set props_viewonly 0 - } - if {$props_viewonly == $prop0_viewonly} {incr fail} - set prop0_viewonly $props_viewonly - } - - if {$props_shared != $prop0_shared} { - if {$did > 0} {after $aft}; incr did - if {$props_shared} { - push_new_value "shared" "shared" 1 1 - } else { - push_new_value "shared" "noshared" 1 1 - } - if {$menu_var(shared)} { - set props_shared 1 - } else { - set props_shared 0 - } - if {$props_shared == $prop0_shared} {incr fail} - set prop0_shared $props_shared - } - - if {$props_zeroconf != $prop0_zeroconf} { - if {$did > 0} {after $aft}; incr did - if {$props_zeroconf} { - push_new_value "zeroconf" "zeroconf" 1 1 - } else { - push_new_value "zeroconf" "nozeroconf" 1 1 - } - if {$menu_var(zeroconf)} { - set props_zeroconf 1 - } else { - set props_zeroconf 0 - } - if {$props_zeroconf == $prop0_zeroconf} {incr fail} - set prop0_zeroconf $props_zeroconf - } - - if {$props_javaview != $prop0_javaview} { - if {$did > 0} {after $aft}; incr did - if {$props_javaview} { - push_new_value "http" "http" 1 1 - } else { - push_new_value "http" "nohttp" 1 1 - } - if {$menu_var(http)} { - set props_javaview 1 - } else { - set props_javaview 0 - } - if {$props_javaview == $prop0_javaview} {incr fail} - set prop0_javaview $props_javaview - } - - if {$props_solid != $prop0_solid} { - if {$did > 0} {after $aft}; incr did - if {$props_solid} { - push_new_value "solid" "solid" 1 1 - } else { - push_new_value "solid" "nosolid" 1 1 - } - if {$menu_var(solid)} { - set props_solid 1 - } else { - set props_solid 0 - } - if {$props_solid == $prop0_solid} {incr fail} - set prop0_solid $props_solid - } - - set fpw 0 - if {$props_passwd != $prop0_passwd} { - set fpw 1 - } - set vpw 0 - if {$props_viewpasswd != $prop0_viewpasswd} { - set vpw 1 - } - - set pw_ord [list] - if {!$fpw && !$vpw } { - # neither change - ; - } elseif {$fpw && !$vpw} { - # full password change - if {$props_passwd == ""} { - if {$prop0_viewpasswd != ""} { - # set view to "" as well and first - set props_viewpasswd "" - set pw_ord [list vpw fpw] - } else { - set pw_ord [list fpw] - } - } else { - # assume view state OK - set pw_ord [list fpw] - } - - } elseif {!$fpw && $vpw} { - # view password change - if {$props_viewpasswd == ""} { - # assume full state OK - set pw_ord [list vpw] - } else { - if {$prop0_passwd == ""} { - # could be trouble, x11vnc makes random - # full passwd... - set pw_ord [list vpw] - } else { - # OK, full non-null. - set pw_ord [list vpw] - } - } - } elseif {$fpw && $vpw} { - # both full and view password change - if {$props_passwd == "" && $props_viewpasswd == ""} { - # OK, do view first - set pw_ord [list vpw fpw] - } elseif {$props_passwd == "" && $props_viewpasswd != ""} { - # Not good, do view first anyway x11vnc will fix. - set pw_ord [list vpw fpw] - } elseif {$props_passwd != "" && $props_viewpasswd == ""} { - # OK, view first - set pw_ord [list vpw fpw] - } elseif {$props_passwd != "" && $props_viewpasswd != ""} { - # OK, full first - set pw_ord [list fpw vpw] - } - } - - foreach case $pw_ord { - if {$case == "fpw"} { - if {$did > 0} {after $aft}; incr did - push_new_value "passwd" "passwd" "$props_passwd" 1 - if {$props_passwd == $prop0_passwd} {incr fail} - set prop0_passwd $props_passwd - } - if {$case == "vpw"} { - if {$did > 0} {after $aft}; incr did - push_new_value "viewpasswd" "viewpasswd" "$props_viewpasswd" 1 - if {$props_viewpasswd == $prop0_viewpasswd} {incr fail} - set prop0_viewpasswd $props_viewpasswd - } - } - - if {$props_accept != $prop0_accept} { - if {$did > 0} {after $aft}; incr did - if {$props_accept} { - push_new_value "unlock" "unlock" 1 0 - } else { - push_new_value "lock" "lock" 1 0 - } - if {$props_accept == $prop0_accept} {incr fail} - set prop0_accept $props_accept - } - - props_widgets normal - if {$fail > 0} { - return 0 - } else { - return 1 - } -} - -proc props_advanced {} { - global icon_mode props_win full_win - global props_advanced_first - - if ![info exists props_advanced_first] { - center_win $full_win - set props_advanced_first 1 - set first 1 - } else { - set first 0 - } - update - wm deiconify $full_win - update - - if {$first} { - set w $full_win - wm minsize $w [winfo width $w] [winfo height $w] - } - push_new_value "remote-cmd" "remote-cmd" "Q:clients" 1 -} - -proc do_props {} { - global props_accept props_confirm props_viewonly props_shared - global props_zeroconf props_javaview props_solid - global props_passwd props_viewpasswd - global prop0_accept prop0_confirm prop0_viewonly prop0_shared - global prop0_zeroconf prop0_javaview prop0_solid - global prop0_passwd prop0_viewpasswd - global menu_var unset_str - global have_labelframes ffont bfont - global props_buttons icon_noadvanced - global icon_mode icon_mode_at_startup - global screen_height screen_width - global do_props_msg - - set msg "" - if {[info exists do_props_msg]} { - set msg $do_props_msg - } - - check_update_vars - - set pady 0.5m - set pady 0.3m - if {$screen_height <= 360} { - set pady 0m - } - - if [info exists menu_var(deny)] { - if {$menu_var(deny) == $unset_str || $menu_var(deny) == 0} { - set props_accept 1 - } else { - set props_accept 0 - } - } else { - set menu_var(deny) 0 - set props_accept 1 - } - set prop0_accept $props_accept - - if [info exists menu_var(accept)] { - if {$menu_var(accept) == $unset_str || $menu_var(accept) == ""} { - set props_confirm 0 - } else { - set props_confirm 1 - } - } else { - set menu_var(accept) "" - set props_confirm 0 - } - set prop0_confirm $props_confirm - - if [info exists menu_var(viewonly)] { - if {$menu_var(viewonly) == $unset_str || $menu_var(viewonly) == ""} { - set props_viewonly 0 - } elseif ($menu_var(viewonly)) { - set props_viewonly 1 - } else { - set props_viewonly 0 - } - } else { - set menu_var(viewonly) 0 - set props_viewonly 0 - } - set prop0_viewonly $props_viewonly - - if [info exists menu_var(shared)] { - if {$menu_var(shared) == $unset_str || $menu_var(shared) == ""} { - set props_shared 0 - } elseif ($menu_var(shared)) { - set props_shared 1 - } else { - set props_shared 0 - } - } else { - set menu_var(shared) 0 - set props_shared 0 - } - set prop0_shared $props_shared - - if [info exists menu_var(zeroconf)] { - if {$menu_var(zeroconf) == $unset_str || $menu_var(zeroconf) == ""} { - set props_zeroconf 0 - } elseif ($menu_var(zeroconf)) { - set props_zeroconf 1 - } else { - set props_zeroconf 0 - } - } else { - set menu_var(zeroconf) 0 - set props_zeroconf 0 - } - set prop0_zeroconf $props_zeroconf - - if [info exists menu_var(http)] { - if {$menu_var(http) == $unset_str || $menu_var(http) == ""} { - set props_javaview 0 - } elseif ($menu_var(http)) { - set props_javaview 1 - } else { - set props_javaview 0 - } - } else { - set menu_var(http) 0 - set props_javaview 0 - } - set prop0_javaview $props_javaview - - if [info exists menu_var(solid)] { - if {$menu_var(solid) == $unset_str || $menu_var(solid) == ""} { - set props_solid 0 - } elseif ($menu_var(solid)) { - set props_solid 1 - } else { - set props_solid 0 - } - } else { - set menu_var(solid) 0 - set props_solid 0 - } - set prop0_solid $props_solid - - if ![info exists props_passwd] { - set props_passwd "" - } - set prop0_passwd $props_passwd - - if ![info exists props_viewpasswd] { - set props_viewpasswd "" - } - set prop0_viewpasswd $props_viewpasswd - - if [info exists props_buttons] { - catch {unset props_buttons} - } - set props_buttons [list] - - set wp .props - set w $wp - catch {destroy $wp} - toplevel $wp - wm title $wp "x11vnc Properties" - frame $w.lf - set w $w.lf - set b1 "$w.buttons1" - frame $b1 - button $b1.ok -text OK -command "if {\[props_apply\]} {destroy $wp}" -font $bfont - button $b1.cancel -text Cancel -command "destroy $wp" -font $bfont - button $b1.apply -text Apply -command "props_apply" -font $bfont - - bind $w <KeyPress-Escape> "destroy $wp" - - pack $b1.ok $b1.cancel $b1.apply -side left -expand 0 - lappend props_buttons $b1.apply $b1.cancel $b1.ok - - set b2 "$w.buttons2" - frame $b2 - - button $b2.advanced -text " Advanced ... " \ - -command "destroy $wp; props_advanced" -font $bfont - if {! $icon_noadvanced} { - lappend props_buttons $b2.advanced - pack $b2.advanced -side left -expand 0 - } - - button $b2.help -text " Help " -command "menu_help Properties" -font $bfont - lappend props_buttons $b2.help - pack $b2.help -side left -expand 0 - - set pw "$w.passwd" - if {$have_labelframes} { - labelframe $pw -text "Password" -font $bfont - } else { - frame $pw - set l $pw.l - label $l -text "Password:" -justify left -anchor w -font $bfont - pack $pw.l -fill x -expand 1 -padx 1m -pady 0m -side top - } - entry $pw.e -show "*" -textvariable props_passwd -font $bfont - pack $pw.e -fill x -expand 1 -padx 1m -pady $pady -side top - - global x11vnc_icon_mode - if {! $x11vnc_icon_mode} { - catch { $pw.e configure -state disabled} - if {! $have_labelframes} { - catch { $pw.l configure -state disabled} - } - } else { - lappend props_buttons $pw.e - } - - - set vp "$w.viewpw" - if {$have_labelframes} { - labelframe $vp -text "ViewOnly Password" -font $bfont - } else { - frame $vp - set l $vp.l - label $l -text "ViewOnly Password:" -justify left -anchor w -font $bfont - pack $vp.l -fill x -expand 1 -padx 1m -pady 0m -side top - } - entry $vp.e -show "*" -textvariable props_viewpasswd -font $bfont - pack $vp.e -fill x -expand 1 -padx 1m -pady $pady -side top - - if {! $x11vnc_icon_mode} { - catch { $vp.e configure -state disabled} - if {! $have_labelframes} { - catch { $vp.l configure -state disabled} - } - } else { - lappend props_buttons $vp.e - } - - if {! $icon_mode_at_startup} { - $vp.e configure -state disabled - catch {$vp.l configure -state disabled} - catch {$vp configure -state disabled} - catch {$vp configure -foreground grey60} - $pw.e configure -state disabled - catch {$pw.l configure -state disabled} - catch {$pw configure -state disabled} - catch {$pw configure -foreground grey60} - } - - set sb "$w.solid" - frame $sb - checkbutton $sb.button -text "Solid Background Color" \ - -variable props_solid -anchor w -font $bfont - pack $sb.button -fill x -expand 1 -padx 1m -pady $pady - - set jv "$w.javaview" - frame $jv - checkbutton $jv.button -text "Serve Java Viewer Applet" \ - -variable props_javaview -anchor w -font $bfont - pack $jv.button -fill x -expand 1 -padx 1m -pady $pady - - set zc "$w.zeroconf" - frame $zc - checkbutton $zc.button -text "Advertise Service (Zeroconf)" \ - -variable props_zeroconf -anchor w -font $bfont - pack $zc.button -fill x -expand 1 -padx 1m -pady $pady - - set sh "$w.shared" - frame $sh - checkbutton $sh.button -text "Shared" \ - -variable props_shared -anchor w -font $bfont - pack $sh.button -fill x -expand 1 -padx 1m -pady $pady - - set vo "$w.viewonly" - frame $vo - checkbutton $vo.button -text "All Clients ViewOnly" \ - -variable props_viewonly -anchor w -font $bfont - pack $vo.button -fill x -expand 1 -padx 1m -pady $pady - - set cf "$w.confirm" - frame $cf - checkbutton $cf.button -text "Ask for Confirmation" \ - -variable props_confirm -anchor w -font $bfont - pack $cf.button -fill x -expand 1 -padx 1m -pady $pady - - set ac "$w.accept" - frame $ac - checkbutton $ac.button -text "Accept Connections" \ - -variable props_accept -anchor w -font $bfont - pack $ac.button -fill x -expand 1 -padx 1m -pady $pady - - set px "6m" - pack $b1 -side bottom -fill x -pady $pady -padx $px - pack $b2 -side bottom -fill x -pady $pady -padx $px - pack $vp -side bottom -fill x -pady $pady -padx $px - pack $pw -side bottom -fill x -pady $pady -padx $px - pack $sb -side bottom -fill x -pady 0m -padx $px - pack $jv -side bottom -fill x -pady 0m -padx $px - pack $zc -side bottom -fill x -pady 0m -padx $px - pack $sh -side bottom -fill x -pady 0m -padx $px - pack $vo -side bottom -fill x -pady 0m -padx $px - pack $cf -side bottom -fill x -pady 0m -padx $px - pack $ac -side bottom -fill x -pady 0m -padx $px - - global show_props_instructions - if {![info exists show_props_instructions]} { - set show_props_instructions 1 - } - - wm withdraw .props - - set wl $w - - pack $wl -side left - - if {$msg != ""} { - set tw [textwidth $msg] - set th [textheight $msg] - set th [expr $th - 1] - set ms ".props.msg" - text $ms -font $ffont -relief ridge -width $tw -height $th - $ms insert 1.0 $msg - - set si "$wl.instructions" - frame $si - checkbutton $si.button -text "Show Instructions" \ - -variable show_props_instructions -anchor w -font $bfont \ - -command "toggle_instructions $ms $pady $px" - - pack $si.button -fill x -expand 1 -padx 1m -pady $pady - pack $si -side bottom -fill x -pady 0m -padx $px - - if {$show_props_instructions} { - pack $ms -side left -fill both - } - - update - } - - - lappend props_buttons $ac.button $cf.button $vo.button $sh.button $zc.button $jv.button $sb.button - - - set w .props - update - wm resizable $w 1 0 - center_win $w - update - - #wm minsize $w [winfo width $w] [winfo height $w] - - tkwait window $w - set show_props_instructions 0 -} - -proc toggle_instructions {ms pady px} { - global show_props_instructions - if {$show_props_instructions} { - pack $ms -side left -fill both - } else { - pack forget $ms - } - catch {pack .props} - update -} - -proc do_new_client {} { - global newclient ffont bfont - - set w .newclient - catch {destroy $w} - toplevel $w - label $w.l -text "Hostname: " -font $bfont - set newclient "" - entry $w.e -width 16 -textvariable newclient -font $bfont - button $w.b -text OK -command "destroy $w" -font $bfont - button $w.h -text Help -command "menu_help NewClient" -font $bfont - bind $w.e <Return> "update; after 100; destroy $w" - - wm title $w "New Client" - - pack $w.l $w.e $w.h $w.b -side left -pady 1m -padx 0.5m - focus $w.e - center_win $w - update - - tkwait window $w - - regsub -all {[{}()~!$&*|;'"`{}<>\[\]]} $newclient "" newclient - #' - if {$newclient != ""} { - push_new_value "connect" "connect" "$newclient" 1 - } -} - -proc do_disconnect_all {} { - push_new_value "disconnect" "disconnect" "all" 1 -} - -proc do_disconnect_client {id} { - push_new_value "disconnect" "disconnect" "$id" 1 -} - -proc popup_post {m} { - global popup_cascade_posted client_balloon - global client_id_list - - set popup_cascade_posted 0 - - set wd "$m.disconnect" - - if {![winfo exists $wd]} { - return - } - - catch {$wd delete 0 end} - - $wd add command -label "Disconnect client:" - $wd add separator - $wd add command -label "All Clients" -command do_disconnect_all - - if {![info exists client_id_list]} { - return - } - - foreach client $client_id_list { - if {$client == ""} { - continue - } - if {[regexp {^([^:]*):(.*)$} $client mat id lab]} { - set nid [expr "$id + 0"] - $wd add command -label "$nid $lab" \ - -command "do_disconnect_client $id" - } - } -} - -proc pmenu {m x y} { - if {![winfo exists $m]} { - return - } - set x [expr $x-10] - set y [expr $y-10] - $m post $x $y - # XXX more care needed - grab set -global $m -} - -proc set_client_balloon {str} { - global client_balloon vnc_display - global client_id_list - - set client_id_list [list] - - set client_balloon "$vnc_display" - set count 0 - regsub -all {^.*aro=clients:} $str "" str - regsub -all {aro=.*$} $str "" str - regsub -all {ans=.*$} $str "" str - foreach client [split $str ","] { - #puts "client: $client" - if [regexp {^[ ]*$} $client] { - continue - } - if {[regexp {^(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*):(.*)$} \ - $client m0 m1 m2 m3 m4 m5 m6 m7 m8 m9]} { - set id $m1 - set nid [expr "$m1 + 0"] - set ip $m2 - set port $m3 - set user $m4 - set unix $m5 - if {[string length $user] >= 24} { - # weird identd hash... - set user [string range $user 0 8] - set user "${user}..." - } - if {$unix != "" && $unix != "none"} { - set user $unix - } - set host $m6 - set input $m7 - set vo $m8 - set ltime $m9 - if [regexp {^[ ]*$} $host] { - set host $ip - } - set client_balloon "${client_balloon}\n$nid $user\@$host" - if {$vo == "1"} { - set client_balloon "${client_balloon} - view" - lappend client_id_list "$id:$user\@$host - view" - } else { - set client_balloon "${client_balloon} - full" - lappend client_id_list "$id:$user\@$host - full" - } - } else { - set i [expr $count+1] - if {$i == 1} { - set client_balloon "${client_balloon}\nunknown-host$i" - } - } - incr count - } - if {$count == 0} { - set client_balloon "${client_balloon}\nNo connections." - } - icon_win_cfg $count -} - -proc read_client_info {channel} { - global x11vnc_client_file client_str client_info_read - global read_client_info_lock - global read_clients - set db 0 - - set read_clients 0 - - if {![info exists read_client_info_lock]} { - set read_client_info_lock 0 - } - - if {$channel != ""} { - - if {$read_client_info_lock} { - return - } - set read_client_info_lock 1 - after 100 - set str "" - set count [gets $channel str] - if {$db} {puts stderr "read_client_info-$channel: $str"} - - if {$count == -1 || [eof $channel]} { - close $channel - catch {file delete $x11vnc_client_file} - set read_client_info_lock 0 - clean_icon_exit - } - if {$count > 0 && ![regexp {^[ ]*$} $str]} { - set client_info_read 1 - if {$str == "quit"} { - catch {file delete $x11vnc_client_file} - set read_client_info_lock 0 - clean_icon_exit - } elseif {$str == "skip"} { - ; - } elseif [regexp {^clients:} $str] { - regsub {^clients:} $str "" str - set read_clients 1 - if {$str == "none"} { - set str "" - } - update_clients_menu $str - set client_str $str - set_client_balloon $str - } - } - set read_client_info_lock 0 - } -} - -proc check_set_vnc_display {} { - - global read_clients check_set_vnc_display_done - - if {[info exists check_set_vnc_display_done]} { - return - } - if {[info exists read_clients]} { - if {$read_clients} { - after 250 - query_all - global client_str - set_client_balloon $client_str - set check_set_vnc_display_done 1 - } - } -} - -proc read_client_tail {} { - global client_tail - - if {$client_tail != ""} { - read_client_info $client_tail - check_set_vnc_display - } -} - -proc read_client_sock {} { - global client_sock - - if {$client_sock != ""} { - read_client_info $client_sock - check_set_vnc_display - } -} - -proc show_client_balloon {} { - global icon_mode icon_win props_win full_win - global client_balloon ffont connected_to_x11vnc - - set noinfo "tkx11vnc: no client information" - set noinfo "$noinfo\navailable from x11vnc ..." - if ![info exists client_balloon] { - set client_balloon $noinfo - } - if {$client_balloon == ""} { - set client_balloon $noinfo - } - if {! [info exists icon_win]} { - return - } elseif {$icon_win == ""} { - return - } elseif {! [winfo exists $icon_win]} { - return - } - - set x [expr [winfo rootx $icon_win] + ([winfo width $icon_win]/2)] - set y [expr [winfo rooty $icon_win] + [winfo height $icon_win] + 4] - - set infotext $client_balloon - if {!$connected_to_x11vnc} { - set infotext "Not currently attached to x11vnc\nLast available info:\n$infotext" - } - - set w .client_balloon - catch {destroy $w} - toplevel $w -bg black -screen [winfo screen $icon_win] - wm overrideredirect $w 1 - label $w.l -text "$infotext" -relief flat -bg "#ffffaa" -fg black \ - -padx 2 -pady 0 -anchor w -justify left -font $ffont - pack $w.l -side left -padx 1 -pady 1 - - set w2 [winfo reqwidth $w.l] - set h2 [winfo reqheight $w.l] - - set W [winfo screenwidth $w] - set H [winfo screenheight $w] - - if {[expr $x+$w2] > $W} { - set w3 [winfo width $icon_win] - set x [expr "$W - $w2 - $w3 - 4"] - } - if {[expr $y+$h2] > $H} { - set h3 [winfo height $icon_win] - set y [expr "$H - $h2 - $h3 - 4"] - } - - wm geometry $w +${x}+${y} -} - -proc kill_client_balloon {} { - global client_balloon_id client_balloon_win - if [info exists client_balloon_id] { - catch {after cancel $client_balloon_id} - } - if [winfo exists .client_balloon] { - destroy .client_balloon - } -} - -proc icon_win_cfg {clients} { - global icon_win client_tail client_sock client_info_read - - if {! [info exists icon_win]} { - return - } elseif {$icon_win == ""} { - return - } elseif {! [winfo exists $icon_win]} { - return - } - if {$clients > 0} { - $icon_win configure -bg black -fg white - } else { - $icon_win configure -bg white -fg black - } - - if {$client_tail == "" || !$client_info_read} { - if {$client_sock == ""} { - $icon_win configure -fg red - } - } -} - -proc server_accept {sock addr port} { - global socket_cookie server socket_got_callback - global client_tail client_sock - set db 0 - - if {$db} {puts stderr "sock=$sock addr=$addr port=$port"} - - update; update idletasks - after 50 - update; update idletasks - set count [gets $sock str] - - if {$count >= 0} { - set str [string trim $str] - if {$db} {puts stderr "server_accept: \"$str\""} - if {$str == "COOKIE:$socket_cookie"} { - set client_sock $sock - if {$db} {puts stderr "cookie matched. $client_sock"} - } else { - if {$db} {puts stderr "cookie NO matched."} - } - } - catch {close $server} - set socket_got_callback 1 - if {$db} {puts stderr "socket_got_callback $socket_got_callback"} -} - -proc try_client_info_sock {} { - global socket_cookie server socket_got_callback - global x11vnc_started x11vnc_xdisplay hostname client_sock - global x11vnc_xdisplay0 menu_var - - set db 0 -#dtime t1 - set start 13037 - set tries 100 - set socket_got_callback 0 - - set xd $x11vnc_xdisplay - if {$xd == "" && $x11vnc_xdisplay0 != ""} { - set xd $x11vnc_xdisplay0 - } - if {$xd == "" && [info exists menu_var(display)]} { - set xd $menu_var(display) - } - - set myaddr "" - regsub {\..*$} $hostname "" shost - if {$x11vnc_started} { - set myaddr "127.0.0.1" - } elseif {$xd != ""} { - if {[regexp {^:} $xd]} { - set myaddr "127.0.0.1" - } elseif {[regexp -nocase "^$shost" $xd]} { - set myaddr "127.0.0.1" - } elseif {[regexp -nocase "^localhost" $xd]} { - set myaddr "127.0.0.1" - } else { - set myaddr $hostname - } - } else { - set myaddr $hostname - } - - for {set i 0} {$i <= $tries} {incr i} { - set port [expr $start + $i] - set server [socket -server server_accept -myaddr $myaddr $port] - if {$server == ""} { - continue - } - if {[eof $server]} { - continue - } - set err "" - catch {set err [fconfigure $server -error]} - #puts "err: $server: $err" - if {$err == ""} { - break - } - } - if {$server == ""} { - append_text "try_client_info_sock: server socket failed.\n" - return - } - if {! $x11vnc_started} { - run_remote_cmd [list "-nosync" "-R" "noop"] - if {$db} {dtime A} - after 250 - if {$db} {dtime A} - } - - # set the cookie to some obscured randomness - set socket_cookie [clock clicks] - set r [expr rand()] - if {$r != ""} { - append socket_cookie $r - } - set r "" - catch {set r [winfo id .]} - if {$r != ""} { - append socket_cookie $r - } - if {[regexp {([0-9])([0-9])$} [clock clicks] m m1 m2]} { - regsub -all {\.} $socket_cookie $m1 socket_cookie - regsub -all {x} $socket_cookie $m2 socket_cookie - } - run_remote_cmd [list "-nosync" "-R" \ - "client_info_sock:$myaddr:$port:$socket_cookie"] -#dtime t2 - if {$db} {puts "client_info_sock:$myaddr:$port:$socket_cookie"} - for {set i 0} {$i < 10} {incr i} { - after 50 - update; update idletasks -#dtime aa - if {$socket_got_callback != 0} { -#puts "break-" - break - } - } -#dtime t3 - - set aftid "" - if {$socket_got_callback == 0} { - set aftid [after 10000 {set socket_got_callback 2}] - tkwait variable socket_got_callback - } - - if {$aftid != ""} { - catch {after cancel $aftid} - } - - if {$socket_got_callback != 1} { - puts stderr "try_client_info_sock failed: no callback\n" - catch {close $server} - } else { - setup_client_sock 1 - } -#dtime t4 -} - -proc set_icon_label {} { - global icon_win - - set lab [get_icon_label] - - if {! [info exists icon_win]} { - return - } elseif {$icon_win == ""} { - return - } elseif {! [winfo exists $icon_win]} { - return - } - - if {[info exists icon_win]} { - $icon_win configure -text $lab - } -} - -proc get_icon_label {{set 0}} { - global icon_minimal - - set lab0 "x11\nvnc" - - if {$icon_minimal} { - set lab [get_vnc_display_number] - if {$lab != "none"} { - #set lab " :$lab" - set lab ":$lab" - } else { - set lab "-" - } - } else { - set lab $lab0 - } - return $lab -} - -# currently unused -proc lmenu {menu} { - global popup_cascade_posted - global left_iconwin_menu - set left_iconwin_menu 1 - after 100 - update - if {!$popup_cascade_posted && $left_iconwin_menu} { - for {set i 0} {$i < 3} {incr i} { - after 100 - update - } - if {!$popup_cascade_posted && $left_iconwin_menu} { - $menu unpost - return - } - } - # kludge for WindowView - if {$popup_cascade_posted} { - focus $menu - } -} - -proc old_balloon {} { - global client_str saved_clients_str - set str "" - if {[info exists client_str]} { - if {$client_str != ""} { - set str $client_str - } - } - if {$str == ""} { - if {[info exists saved_clients_str]} { - set str $saved_clients_str - } - } - if {$str != ""} { - set_client_balloon $str - } -} - -proc get_custom_menu_items {} { - global env custom_last_read - - if {![info exists custom_last_read]} { - set custom_last_read 0 - } - if {[info exists env(X11VNC_CUSTOM_GUI)]} { - set custom "$env(X11VNC_CUSTOM_GUI)" - } elseif {![info exists env(HOME)]} { - return [list "none"] - } else { - set custom "$env(HOME)/.x11vnc.gui" - } - if {![file exists $custom]} { - return [list "none"] - } - -# if {[file mtime $custom] <= $custom_last_read} { -# return [list "nochange"] -# } - - set in "" - catch {set in [open $custom "r"]} - if {$in == ""} { - return [list "none"] - } - - set custom_last_read [clock seconds] - - set count 0 - while {[gets $in line] > -1} { - if {[regexp {^[ \t]*#} $line]} { - continue - } - set line [string trim $line] - if {$line != ""} { - lappend items $line - incr count - } - } - close $in - - if {$count > 0} { - return $items - } else { - return [list "none"] - } -} - -proc make_custom_menu {menu font} { - set items [get_custom_menu_items] - set i0 [lindex $items 0] - catch {$menu delete 0 end} - if {$i0 != "none"} { - $menu add command -font $font -label "Custom items:" - $menu add separator - foreach item $items { - if {$item == "sep" || $item == "separator"} { - $menu add separator - continue - } - if {[regexp {^action:(.*)$} $item m action]} { - $menu add command -font $font -label "$action" \ - -command "do_var $action" - continue - } - $menu add command -font $font -label "$item" \ - -command "run_remote_cmd \[list \"-R\" \"$item\"\]" - } - } -} - -proc make_icon {} { - global icon_mode icon_embed_id icon_win props_win full_win - global tray_embed tray_running env - global x11vnc_client_file client_tail client_sock client_str saved_clients_str - global client_balloon_id - global bfont sfont snfont ffont - global icon_minimal gui_start_mode - global popup_cascade_posted menu_var x11vnc_gui_geom - set min_x 24 - set min_y 24 - - set font $bfont - set mfont $font - - if {$tray_embed} { - set font $sfont - set mfont $snfont - } - if {[info exists env(X11VNC_ICON_FONT)]} { - set font $env(X11VNC_ICON_FONT) - } - if {[regexp {([0-9][0-9]*)x([0-9][0-9]*)} $x11vnc_gui_geom m mx my]} { - if {$mx < $min_x} { - set min_x $mx - } - if {$my < $min_y} { - set min_y $my - } - } - wm minsize . $min_x $min_y - - if {$tray_embed && $tray_running} { - wm withdraw . - } - - set l .icon - set icon_win $l - catch destroy {$icon_win} - if {$icon_minimal} { - set bw 1 - } else { - set bw 5 - } - set lab [get_icon_label] - label $l -text $lab -borderwidth $bw -font $font - icon_win_cfg 0 - - - set popup_cascade_posted 0 - pack $l -fill both -expand 1 - set menu "$l.menu" - menu $menu -tearoff 0 -postcommand "popup_post $menu" - $menu add command -font $mfont -label "Properties" -command do_props - $menu add command -font $mfont -label "Help" -command "menu_help Tray" - $menu add command -font $mfont -label "Logfile" -command show_logfile - $menu add separator - $menu add command -font $mfont -label "New Client" -command do_new_client - - set wd "$menu.disconnect" - catch {destroy $wd} - menu $wd -tearoff 0 -font $ffont \ - -postcommand {set popup_cascade_posted 1} - $wd add command -label "Disconnect client:" - $wd add separator - $wd add command -label "All Clients" -command do_disconnect_all - $menu add cascade -font $mfont -label "Disconnect:" -menu $wd - - $menu add separator - - set wv "$menu.windowview" - catch {destroy $wv} - menu $wv -tearoff 0 -font $ffont \ - -postcommand {set popup_cascade_posted 1} - foreach val {full icon tray} { - $wv add radiobutton -label "$val" \ - -value "$val" -font $ffont \ - -command "do_var WindowView" \ - -variable menu_var(WindowView) - } - $menu add cascade -font $mfont -label "Window View:" -menu $wv - - $menu add command -font $mfont -label "Dismiss" -command "$menu unpost" - $menu add command -font $mfont -label "Stop x11vnc" -command clean_icon_exit - - set items [get_custom_menu_items] - set i0 [lindex $items 0] - if {$i0 != "none" && $i0 != "nochange"} { - $menu add separator - set cm "$menu.custom" - catch {destroy $cm} - menu $cm -tearoff 0 -font $ffont \ - -postcommand "set popup_cascade_posted 1; make_custom_menu $cm $ffont" - $menu add cascade -font $mfont -label "Custom:" -menu $cm - } - - bind $icon_win <ButtonRelease-1> "pmenu $menu %X %Y" - bind $icon_win <ButtonRelease-3> "pmenu $menu %X %Y" - bind $icon_win <Enter> {set client_balloon_id [after 500 show_client_balloon]} - bind $icon_win <Button> {kill_client_balloon} - bind $icon_win <Leave> {kill_client_balloon} - bind $icon_win <Shift-ButtonRelease-1> {kill_client_balloon; show_client_balloon} - bind $icon_win <ButtonRelease-2> {kill_client_balloon; show_client_balloon} -# bind $menu <Leave> "lmenu $menu" -# bind $menu <Enter> "set left_iconwin_menu 0" -# bind $menu <KeyPress-Escape> "$menu unpost" - - bind . <Control-KeyPress-c> {destroy .; exit 0} - - if {!$tray_embed || !$tray_running} { - global x11vnc_gui_geom - if {$x11vnc_gui_geom != ""} { - set doit 1 - if {[regexp {x} $x11vnc_gui_geom]} { - if {$gui_start_mode == "full"} { - set doit 0 - } - } - if {$doit} { - wm geometry . $x11vnc_gui_geom - } - } - } - wm iconname . "tkx11vnc" - wm title . "tkx11vnc" - update - if {$tray_embed && $tray_running} { - #wm deiconify .; # why did we have this??? - #after 10000 {wm deiconify .; puts "reqheight [winfo reqheight .]"; puts "reqwidth [winfo reqwidth .]"; puts "height [winfo height .]"; puts "width [winfo width .]"} - } else { - wm deiconify . - } - update - -#puts "reqheight [winfo reqheight .]" -#puts "reqwidth [winfo reqwidth .]" -#puts "height [winfo height .]" -#puts "width [winfo width .]" -#puts "AAA" - - old_balloon -} - -proc setup_client_channel {} { - global client_sock client_tail - -# XXX/setup_client_channel - if {$client_sock == "" } { - stop_watch on - try_client_info_sock - if {$client_sock == "" } { - after 500 - try_client_info_sock - } - stop_watch off - } - if {$client_tail == "" && $client_sock == ""} { - set m "\n" - set m "${m}tkx11vnc:\n" - set m "${m}\n" - set m "${m} Warning -- running in icon/tray mode but the\n" - set m "${m} connected client info channel from x11vnc is\n" - set m "${m} not working. The viewer client list and icon\n" - set m "${m} color indicator will not be accurate.\n" - set m "${m}\n" - set m "${m} You may need to restart \"x11vnc -gui tray ...\"\n" - set m "${m} for this to work properly.\n" - set m "${m}\n" - textwin "Warning" "Warning" $m - update - } - dtime C -} - -proc clean_client_tail {} { - global client_tail client_info_read - if [info exists client_tail] { - if {$client_tail != ""} { - set p "" - catch {set p [pid $client_tail]} - if {$p != ""} { - catch {exec kill -TERM $p >/dev/null 2>/dev/null} - } - catch {close $client_tail} - set client_tail "" - } - } - set client_info_read 0 -} - -proc clean_icon_exit {} { - clean_client_tail - push_new_value "stop" "stop" 1 0 - set_connected no - update - destroy . - exit -} - -proc make_gui {mode} { - global icon_mode tray_embed tray_running full_win icon_win - global top_widget_names x11vnc_gui_geom - global gui_current_state make_gui_count - global x11vnc_connect connected_to_x11vnc - global x11_display - global gui_start_mode - - incr make_gui_count - - if {$gui_start_mode == ""} { - set gui_start_mode $mode - } - - wm withdraw . - - set full_geom "" - if {[winfo exists .full]} { - catch {set full_geom [wm geometry .full]} - } - - set fw .full - set full_win $fw - catch {pack forget $full_win} - catch {pack forget $icon_win} - catch {destroy $full_win} - catch {destroy $icon_win} - - wm minsize . 1 1 - - set gui_current_state "" - - if {$mode == "full"} { - frame $fw - set icon_mode 0 - - wm protocol . WM_DELETE_WINDOW "destroy .; exit" - make_widgets $fw - - set w "." - wm geometry $w "" - if {$x11vnc_gui_geom != ""} { - set doit 1 - if {[regexp {x} $x11vnc_gui_geom]} { - if {$gui_start_mode != $mode} { - set doit 0 - } - } - if {$doit} { - wm geometry $w $x11vnc_gui_geom - } - } - pack $fw -fill both -expand 1 - - } elseif {$mode == "icon" || $mode == "tray"} { - - toplevel $fw - wm withdraw $fw - - wm protocol $fw WM_DELETE_WINDOW "wm withdraw .full" - wm protocol . WM_DELETE_WINDOW "clean_icon_exit" - - if {$mode == "icon"} { - set tray_embed 0 - } elseif {$mode == "tray"} { - set tray_embed 1 - } - set icon_mode 1 - make_widgets $fw - set w $fw - make_icon - wm geometry $fw "" - wm geometry . "" - } else { - return - } - set_view_variable $mode - set gui_current_state $mode - - - update - if {!$tray_embed || !$tray_running} { - wm deiconify . - } - update idletasks - wm minsize $w [winfo width $w] [winfo height $w] - if {$mode == "full" && $make_gui_count > 1} { - center_win . - } - - - if {$make_gui_count == 1} { - copy_default_vars - if {$x11vnc_connect} { - try_connect_and_query_all - } else { - insert_cmdline_vars - } - } else { - set_name "RESTORE" - } - - setup_client_tail - - set_widgets - - if {$mode == "tray"} { - setup_tray_embed - } -} - -proc make_widgets {top} { - global template make_gui_count - global menu_b menu_m menu_count - global item_opts item_bool item_case item_menu item_entry menu_var unset_str - global item_cascade - global info_label info_str x11_display vnc_display - global text_area text_area_str - global entry_box entry_str entry_set entry_label entry_ok entry_browse - global entry_help entry_skip - global bfont ffont beginner_mode - global helptext helpremote helplabel - global icon_mode icon_win props_win full_win - global top_widget_names - global screen_height screen_width - - - # Make the top label - set label_width 84 - if {$screen_width <= 400} { - set label_width 64 - } - set info_label "$top.info" - label $info_label -textvariable info_str -bd 2 -relief groove \ - -anchor w -width $label_width -font $ffont - pack $info_label -side top -fill x -expand 0 - - set top_widget_names(info) $info_label - - # Extract the Rows: - set row 0; - set colmax 0; - foreach line [split $template "\n"] { - if {[regexp {^Row: (.*)} $line rest]} { - set col 0 - foreach case [split $rest] { - if {$case == "" || $case == "Row:"} { - continue - } - set menu_row($case) $row - set menu_col($case) $col - - lappend cases($col) $case; - set len [string length $case] - if {[info exists max_len($col)]} { - if {$len > $max_len($col)} { - set max_len($col) $len - } - } else { - set max_len($col) $len - } - incr col - if {$col > $colmax} { - set colmax $col - } - } - incr row; - } - } - - # Make frames for the rows and make the menu buttons. - set f "$top.menuframe" - frame $f - for {set c 0} {$c < $colmax} {incr c} { - set colf "$f.menuframe$c" - frame $colf - pack $colf -side left -fill y - set fbg [$colf cget -background] - foreach case $cases($c) { - set menub "$colf.menu$case"; - set menu "$colf.menu$case.menu"; - set menu_b($case) $menub - set menu_m($case) $menu - set ul 0 - foreach char [split $case ""] { - set char [string tolower $char] - if {![info exists underlined($char)]} { - set underlined($char) 1 - break - } - incr ul - } - global osname - set tstr "$case" - if {$osname == "Darwin"} { - #set tstr " $case " - } - menubutton $menub -text "$tstr" -underline $ul \ - -anchor w -menu $menu -background $fbg \ - -font $bfont - pack $menub -side top -fill x - menu $menu -tearoff 0 -postcommand menu_posted - } - } - pack $f -side top -fill x - set top_widget_names(menuframe) $f - - make_menu_items - - # Make the x11 and vnc display label bar: - set df "$top.displayframe" - frame $df -bd 1 -relief groove - set top_widget_names(displayframe) $df - - set df_x11 "$df.xdisplay" - - if {$make_gui_count == 1} { - no_x11_display - } - set lw [expr {$label_width / 2}] - label $df_x11 -textvariable x11_display -width $lw -anchor w \ - -font $ffont - - set df_vnc "$df.vdisplay" - - if {$make_gui_count == 1} { - no_vnc_display - } - label $df_vnc -textvariable vnc_display -width $lw -anchor w \ - -font $ffont - - pack $df_x11 $df_vnc -side left - pack $df -side top -fill x - - # text area - global text_height - set text_area "$top.text" - if {$screen_width <= 400} { - text $text_area -height $text_height -width $label_width \ - -relief ridge -font $ffont - } else { - text $text_area -height $text_height -relief ridge -font $ffont - } - pack $text_area -side top -fill both -expand 1 - set top_widget_names(text) $text_area - - - if {$text_area_str == ""} { - set str "Click Help -> gui for overview." - append_text "\n$str\n\n" - } else { - append_text $text_area_str - } - - # Make entry box stuff - set ef "$top.entryframe" - frame $ef -bd 1 -relief groove - set top_widget_names(entryframe) $ef - - # Entry Label - set ef_label "$ef.label" - label $ef_label -textvariable entry_str -anchor w -font $bfont - - set entry_str "Set... : " - set ef_entry "$ef.entry" - entry $ef_entry -relief sunken -font $ffont - bind $ef_entry <KeyPress-Return> {set entry_set 1} - bind $ef_entry <KeyPress-Escape> {set entry_set 0} - - set ok_s "OK" - set cancel_s "Cancel" - set help_s "Help" - set browse_s "Browse..." - global osname - if {$osname == "Darwin"} { - set ok_s " OK " - set cancel_s " Cancel " - set help_s " Help " - set browse_s " Browse... " - } - - # Entry OK button - set bpx "1m" - set bpy "1" - set hlt "0" - set ef_ok "$ef.ok" - button $ef_ok -text $ok_s -pady $bpy -padx $bpx -command {set entry_set 1} \ - -highlightthickness $hlt \ - -font $bfont - - # Entry Skip button - set ef_skip "$ef.skip" - button $ef_skip -text $cancel_s -pady $bpy -padx $bpx -command {set entry_set 0} \ - -highlightthickness $hlt \ - -font $bfont - - # Entry Help button - set ef_help "$ef.help" - button $ef_help -text $help_s -pady $bpy -padx $bpx -command \ - {menu_help $entry_dialog_item} -font $bfont \ - -highlightthickness $hlt - - # Entry Browse button - set ef_browse "$ef.browse" - button $ef_browse -text $browse_s -pady $bpy -padx $bpx -font $bfont \ - -highlightthickness $hlt \ - -command {entry_insert [tk_getOpenFile]} - - pack $ef_label -side left - pack $ef_entry -side left -fill x -expand 1 - pack $ef_ok -side right - pack $ef_skip -side right - pack $ef_help -side right - pack $ef -side bottom -fill x - - set entry_ok $ef_ok - set entry_skip $ef_skip - set entry_help $ef_help - set entry_box $ef_entry - set entry_browse $ef_browse - set entry_label $ef_label - entry_disable - -} - -proc menu_bindings {m} { - set db 0 - if {$db} {puts "menu_bindings $m"} - - bind $m <<MenuSelect>> { -#syntax hilite bug \ -MenuSelect>> - set n [%W index active] - set db 0 - if {$db} {puts stderr "menu_bindings %W $n"} - set label " " - if {$n != "none"} { - set str %W,$n - set which "" - - if {$db} {puts "menu_bindings $str"} - if {[info exists helplabel($str)]} { - set vname [format %%-16s $helplabel($str)] - set label "Click (?) for help on: $vname" - set which $helplabel($str) - } - if {$which == ""} { - ; - } elseif {$which == "passwd" || $which == "viewpasswd"} { - ; - } elseif {[is_action $which]} { - if {[info exists menu_var($which)] - && $menu_var($which) != ""} { - set label "$label value: $menu_var($which)" - } else { - set label "$label (is action)" - } - } elseif {[info exists menu_var($which)]} { - set label "$label value: $menu_var($which)" - if {$which == "http"} { - global vnc_url - set label "$label URL: $vnc_url" - } - } - } - set_info $label - } -} - -proc key_bindings {} { - global env menus_disabled - if {[info exists env(USER)] && $env(USER) == "runge"} { - # quick restart - bind . <Control-KeyPress-k> {exec $argv0 $argv &; destroy .} - } - bind . <Control-KeyPress-p> { \ - global menus_disabled; \ - if {!$menus_disabled} {try_connect_and_query_all} \ - } - bind . <Control-KeyPress-u> { \ - global menus_disabled; \ - if {!$menus_disabled} {query_all 0} \ - } - bind . <Control-KeyPress-r> { \ - global menus_disabled; \ - if {!$menus_disabled} {query_all 0} \ - } - bind . <Control-KeyPress-d> { \ - global menus_disabled; \ - if {!$menus_disabled} {detach_from_display} \ - } - bind . <Control-KeyPress-a> { \ - global menus_disabled; \ - if {!$menus_disabled} {try_connect_and_query_all} \ - } -} - -proc stop_watch {onoff} { - global orig_cursor text_area entry_box - - set widgets [list .] - if [info exists text_area] { - if {$text_area != ""} { - lappend widgets $text_area - } - } - if [info exists entry_box] { - if {$entry_box != ""} { - lappend widgets $entry_box - } - } - - if {$onoff == "on"} { - foreach item $widgets { - if {![winfo exists $item]} { - continue - } - $item config -cursor {watch} - } - } else { - foreach item $widgets { - if {![winfo exists $item]} { - continue - } - $item config -cursor {} - } - } - update -} - -proc double_check_noremote {} { - set msg "\n\n" - append msg "*** WARNING: setting \"noremote\" will disable ALL remote control commands (i.e.\n" - append msg "*** WARNING: *this* gui will be locked out). Do you really want to do this?\n" - append msg "*** WARNING: If so, press \"OK\", otherwise press \"Cancel\"\n" - append msg "\n" - bell - return [warning_dialog $msg "noremote"] -} - -proc get_settings_rcfile {} { - global menu_var default_var unset_str - global x11vnc_gui_params - - set rc_txt "" - - set menu_var(gui) $x11vnc_gui_params - - foreach item [lsort [array names menu_var]] { - if {$item == "gui"} { - ; - } elseif {![active_when_starting $item]} { - continue - } elseif {[is_action $item]} { - continue - } - if {$item == "debug_gui"} { - continue - } elseif {$item == "WindowView"} { - continue - } elseif {$item == "rc" || $item == "norc"} { - continue - } elseif {$item == "loop"} { - continue - } elseif {$item == "loopbg"} { - continue - } - - set def "" - if {[info exists default_var($item)]} { - set def $default_var($item) - } - - - set qst "" - set hmm "#? " - if {$item == "display"} { - set qst $hmm - } elseif {$item == "desktop"} { - set qst $hmm - } elseif {$item == "dontdisconnect"} { - set qst $hmm - } elseif {$item == "alwaysshared"} { - set qst $hmm - } elseif {$item == "nevershared"} { - set qst $hmm - } elseif {$item == "gui"} { - set qst $hmm - } - - if {![info exists menu_var($item)]} { - set mv $def - } else { - set mv $menu_var($item) - } -#puts "item=$item def=$def mv=$mv" - if {$mv == $unset_str} { - set mv "" - } - set ntab 3 - - if {$item == "gui" || [value_is_string $item]} { - set nitem [get_nitem $item] - - if {$mv == "" && $def != ""} { - set qst $hmm - } - set n 0 - if {$qst != ""} { - append rc_txt $qst - incr n [string length $qst] - } elseif {$mv == $def} { - append rc_txt "#d " - incr n [string length "#d "] - } - set mt $mv - regsub -all {#} $mt {\#} mt - if {$mt == ""} { - set mt {""} - } - append rc_txt "-$nitem $mt" - - if {$mv != $def} { - set m [string length "-$nitem $mt"] - incr n $m - set n [expr $n / 8] - set c 0 - for {set i $n} {$i <= $ntab} {incr i} { - append rc_txt "\t" - incr c - } - if {$c == 0} { - append rc_txt "\t" - } - regsub -all {#} $def {\#} def - if {$def == ""} { - set def {""} - } - append rc_txt "# default: $def" - } - append rc_txt "\n" - - } elseif {[value_is_bool $item]} { - set n 0 - if {$qst != ""} { - append rc_txt $qst - incr n [string length $qst] - } elseif {$mv == $def} { - append rc_txt "#d " - incr n [string length "#d "] - } - if {$def == 1} { - set dv "on" - } else { - set dv "off" - } - append rc_txt "-$item" - set m [string length "-$item"] - incr n $m - set n [expr $n / 8] - for {set i $n} {$i <= $ntab} {incr i} { - append rc_txt "\t" - } - append rc_txt "# default: $dv" - append rc_txt "\n" - - } - } - return $rc_txt -} - -proc double_check_start_x11vnc {} { - global hostname - set msg [get_start_x11vnc_txt] - bell - append msg "\n" - append msg "*** To run the above command on machine \"$hostname\" (thereby\n" - append msg "*** starting x11vnc) press \"OK\", otherwise press \"Cancel\".\n" - return [warning_dialog $msg "start"] -} - -proc get_start_x11vnc_txt {} { - set cmd [get_start_x11vnc_cmd] - set str [join $cmd] - set msg "" - append msg "\n" - append msg "==== The command built so far is: ====\n"; - append msg "\n" - append msg "$str\n" - return $msg -} - -proc show_start_cmd {} { - set msg [get_start_x11vnc_txt] - append_text "$msg\n" -} - -proc get_nitem {item} { - set nitem $item - if {$nitem == "screen_blank"} { - set nitem "sb" - } elseif {$nitem == "xrandr_mode"} { - set nitem "xrandr" - } elseif {$nitem == "unixpw_list"} { - set nitem "unixpw" - } elseif {$nitem == "unixpw_nis_list"} { - set nitem "unixpw_nis" - } elseif {$nitem == "stunnel_pem"} { - set nitem "stunnel" - } elseif {$nitem == "ssl_pem"} { - set nitem "ssl" - } elseif {$nitem == "wireframe_mode"} { - set nitem "wireframe" - } elseif {$nitem == "solid_color"} { - set nitem "solid" - } - return $nitem -} - -proc get_start_x11vnc_cmd {{show_rc 0}} { - global cmd_var menu_var default_var unset_str x11vnc_prog - - set xterm_cmd "xterm -iconic -geometry 80x35 -title x11vnc-console -e" - - set cmd [split $xterm_cmd] - - lappend cmd $x11vnc_prog - - lappend cmd "-gui" - lappend cmd "none" - - set rc_txt "" - - set saw_id 0 - - foreach item [lsort [array names menu_var]] { - if {$item == "gui"} { - continue - } elseif {![active_when_starting $item]} { - continue - } elseif {[is_action $item]} { - continue - } elseif {$item == "debug_gui"} { - continue - } elseif {$item == "WindowView"} { - continue - } - - if {$item == "id" || $item == "sid"} { - set val $menu_var($item); - if {$val == "0x0" || $val == "root"} { - continue - } - } - if {$item == "sid" && $saw_id} { - continue - } - if {$item == "id"} { - set saw_id 1 - } elseif {$item == "httpport" && $menu_var($item) == "0"} { - continue - } elseif {$item == "progressive" && $menu_var($item) == "0"} { - continue - } elseif {$item == "dontdisconnect" && $menu_var($item) == "-1"} { - continue - } elseif {$item == "alwaysshared" && $menu_var($item) == "-1"} { - continue - } - - if {[value_is_bool $item]} { - if {[info exists menu_var($item)]} { - set add 1 - if {[info exists default_var($item)]} { - if {$menu_var($item) == $default_var($item)} { - set add 0; - } - } elseif {! $menu_var($item)} { - set add 0 - } - if {$add} { - lappend cmd "-$item" - append rc_txt "-$item\n" - } - } - } elseif {[value_is_string $item]} { - if {![info exists menu_var($item)]} { - continue - } - if {$menu_var($item) != "" && $menu_var($item) != $unset_str} { - set add 1 - set nitem [get_nitem $item] - - if {[info exists default_var($item)]} { - if {$menu_var($item) == $default_var($item)} { - set add 0; - } - } - if {$add} { - lappend cmd "-$nitem" - set mv $menu_var($item) - - if {[regexp {^~} $mv]} { - if {$item == "auth" || - $item == "rc" || - $item == "accept" || - $item == "connect" || - $item == "allow" || - $item == "passwdfile" || - $item == "o" || - $item == "logfile" || - $item == "remap" || - $item == "httpdir"} { - set mv [tilde_expand $mv] - } - } - - lappend cmd $mv - set mt $mv - regsub -all {#} $mt {\#} mt - append rc_txt "-$nitem $mt\n" - } - } - } - } - lappend cmd "2>" - lappend cmd "/dev/null" - lappend cmd "&" - - if {$show_rc} { - return $rc_txt - } else { - return $cmd - } -} - -proc start_x11vnc {} { - global menu_var unset_str - global x11vnc_prog x11vnc_xdisplay - global connected_to_x11vnc - - if {$connected_to_x11vnc} { - append_text "\n" - append_text "WARNING: Still connected to an x11vnc server.\n" - append_text "WARNING: Use \"stop\" or \"detach\" first.\n" - return 0 - } - - if {![double_check_start_x11vnc]} { - return - } - - set x11vnc_xdisplay "" - if {[info exists menu_var(display)]} { - if {$menu_var(display) != "" && $menu_var(display) != $unset_str} { - set x11vnc_xdisplay $menu_var(display) - } - } - - set cmd [get_start_x11vnc_cmd] - - set str [join $cmd] - regsub { -e} $str " -e \\\n " str - - if {0} { - puts "running: $str" - foreach word $cmd { - puts " word: $word" - } - } - - append_text "Starting x11vnc in an iconified xterm with command:\n" - append_text " $str\n\n" - catch {[eval exec $cmd]} - after 500 - try_connect_and_query_all 3 - if {!$connected_to_x11vnc} { - append_text "\nStarting x11vnc seems to have failed.\n" - if {[regexp -- {-o } $str] || [regexp -- {-logfile} $str]} { - append_text "Examine the logfile (Debugging -> show-logfile) for error messages.\n" - } else { - append_text "Rerun with a logfile (if needed) and examine the logfile\n" - append_text "(Debugging -> show-logfile) for error messages.\n" - } - } -} - -proc run_remote_cmd_via_sock {opts} { - global client_sock - - set db 0 - if {[file channels $client_sock] == ""} { - set client_sock "" - return "fail" - } - if {[eof $client_sock]} { - catch {close $client_sock} - set client_sock "" - return "fail" - } - set result "" - - setup_client_sock 0 - - set docmd "" - foreach opt $opts { - if {$opt == "-R"} { - set docmd "-R" - continue - } elseif {$opt == "-Q"} { - set docmd "-Q" - continue - } - - if {$docmd == ""} { - continue - } elseif {$docmd == "-R"} { - set str "cmd=$opt" - } elseif {$docmd == "-Q"} { - set str "qry=$opt" - } else { - set docmd "" - continue - } - - if {$db} {puts stderr "run_remote_cmd_via_sock: $docmd \"$str\""} - catch {puts $client_sock $str} - if {$db} {puts stderr "run_remote_cmd_via_sock: flush"} - catch {flush $client_sock} - if {$db} {puts stderr "run_remote_cmd_via_sock: gets"} - catch {gets $client_sock res} - if {$db} {puts stderr "run_remote_cmd_via_sock: \"$res\""} - set res [string trim $res] - - if [regexp {=clients:} $res] { - regsub {^.*=clients:} $res "" cres - regsub {,aro=.*$} $cres "" cres - regsub {,ans=.*$} $cres "" cres - if {$cres == "none"} { - set cres "" - } - update_clients_menu $cres - set client_str $cres - set_client_balloon $cres - } - - if [regexp {^clients:} $res] { - regsub {^clients:} $res "" tmp - if {$tmp == "none"} { - set tmp "" - } - update_clients_menu $tmp - set client_str $tmp - set_client_balloon $tmp - - if ![regexp {^clients} $opt] { - # we could block here... - if {$db} {puts stderr "run_remote_cmd_via_sock: gets"} - gets $client_sock res - if {$db} {puts stderr "run_remote_cmd_via_sock: \"$res\""} - set res [string trim $res] - } - } - - set docmd "" - - if {$res != ""} { - append result "$res\n" - } - } - - setup_client_sock 1 - - set result [string trim $result] - - return $result -} - -proc run_remote_cmd {opts} { - global menu_var x11vnc_prog x11vnc_cmdline x11vnc_xdisplay - global x11vnc_auth_file x11vnc_connect_file - global client_sock - - set debug [in_debug_mode] - - if {[lindex $opts 0] == "-R" && [lindex $opts 1] == "noremote"} { - set str [join $opts] - if ![double_check_noremote] { - append_text "skipping: x11vnc $str" - return "" - } else { - append_text "running: x11vnc $str (please do \"Actions -> detach\" to clean things up)\n" - append_text "subsequent -R/-Q commands should fail..." - } - } - - if {$client_sock != ""} { - menus_disable - stop_watch on - set result [run_remote_cmd_via_sock $opts] - stop_watch off - menus_enable - if {$result != "fail"} { - return $result - } - } - - set cmd "" - - lappend cmd $x11vnc_prog; - - if {$x11vnc_connect_file != ""} { - lappend cmd "-connect" - lappend cmd $x11vnc_connect_file - } else { - if {$x11vnc_xdisplay != ""} { - lappend cmd "-display" - lappend cmd $x11vnc_xdisplay - } - if {$x11vnc_auth_file != ""} { - lappend cmd "-auth" - lappend cmd $x11vnc_auth_file - } - } - lappend cmd "-sync" - foreach word $opts { - lappend cmd $word - } - lappend cmd "2>" - lappend cmd "/dev/null" - - if {0 || $debug} { - set str [join $cmd] - puts "running: $str" - foreach word $cmd { - puts " word: $word" - } - } - - set output "" - menus_disable - - stop_watch on - catch {set output [eval exec $cmd]} - stop_watch off - - menus_enable - if {$debug} { - if {[string length $output] > 100} { - set str [string range $output 0 100] - append_text "output: $str ...\n" - } else { - append_text "output: $output\n" - } - } - return $output -} - -proc try_connect_and_query_all {{n 2}} { - for {set i 0} {$i < $n} {incr i} { - if {$i > 0} { - after 500 - append_text "trying again ...\n" - } - if {[try_connect]} { - query_all - break - } - } -} - -proc try_connect {} { - global x11vnc_xdisplay connected_to_x11vnc reply_xdisplay - global menu_var unset_str - - set db 0 -#dtime c1 - - if {! $connected_to_x11vnc} { - if {[info exists menu_var(display)]} { - set d $menu_var(display) - if {$d != "" && $d != $unset_str && $d != $x11vnc_xdisplay} { - set x11vnc_xdisplay $menu_var(display) - append_text "Setting X display to: $x11vnc_xdisplay\n" - } - } - } - - set_info "Pinging $x11vnc_xdisplay ..." - set rargs [list "-Q" "ping"] - set result [run_remote_cmd $rargs] -#dtime c2a - - if {$db} {puts "try_connect: \"$result\""} - - if {[regexp {^ans=ping:} $result]} { - regsub {^ans=ping:} $result {} reply_xdisplay - set msg "Connected to $reply_xdisplay" - set_info $msg - append_text "$msg\n" - set_connected yes - - setup_client_channel -#dtime c2b - setup_client_sock 1 - setup_client_tail - - fetch_displays -#dtime c3a - return 1 - } else { - set str "x11vnc server." - if {$x11vnc_xdisplay != ""} { - set str $x11vnc_xdisplay - } - set msg "No reply from $str" - set_info $msg - append_text "$msg\n" - set_connected no - return 0 - } -} - -proc set_view_variable {val} { - global menu_var - set menu_var(WindowView) $val -} -proc get_view_variable {} { - global menu_var - if {![info exists menu_var(WindowView)]} { - set menu_var(WindowView) "none" - } - return $menu_var(WindowView) -} - -proc dono {a b c} { - exit 1; -} - -proc do_port_prompt {} { - global bfont ffont - global port_reply port_set - - set guess 5900 - for {set i 0} {$i < 50} {incr i} { - set fh "" - set try [expr $guess + $i] - catch {set fh [socket -server dono $try]} - if {$fh != ""} { - catch {close $fh} - set guess $try - break; - } - } - set hn "" - catch {set hn [exec uname -n]} - if {$hn == ""} { - set hn "hostname" - } - - set text " Set the x11vnc Listening Port: - - VNC Display :0 corresponds to TCP port 5900 - VNC Display :1 corresponds to TCP port 5901 - etc. - - In the Entry below, indicate a Port for x11vnc to listen on. - - Note that to connect to x11vnc, a VNC Viewer will need to - know your selection, for example: - - vncviewer $hn:0 - vncviewer $hn:1 - etc. - - Your firewall may block incoming connections to TCP ports; - if it does you may need to reconfigure it. - - You can also set some additional parameters: - - - Enable SSL encryption. - (requires an SSL enabled vncviewer, such as SSVNC) - - Listen only on localhost. (e.g. for an SSH tunnel) - - Enable UltraVNC or TightVNC File transfer. -" - set port_set $guess - set port_reply "" - - toplevel .pp - wm title .pp "Select x11vnc port" - - wm protocol . WM_DELETE_WINDOW "destroy .; exit" - wm protocol .pp WM_DELETE_WINDOW "destroy .pp; exit" - - label .pp.m -text "$text" -relief ridge -justify left -font $ffont - - global tk_version - set tkold 0 - if [info exists tk_version] { - if [regexp {^8\.[0-3]$} $tk_version] { - set tkold 1 - } - if [regexp {^[3-7]\.} $tk_version] { - set tkold 1 - } - } - - if {$tkold} { - frame .pp.f -bd 1 -relief ridge - } else { - frame .pp.f -bd 1 -relief ridge -pady 2 - } - label .pp.f.l -text "Port: " -font $bfont - entry .pp.f.e -width 8 -textvariable port_set -font $ffont - global enable_ssl; set enable_ssl 0 - if [info exists env(X11VNC_SSL_ENABLED)] { - set enable_ssl 1 - } - checkbutton .pp.f.ssl -relief raised -pady 3 -padx 3 -text "Enable SSL" -variable enable_ssl -font $bfont - global localhost; set localhost 0 - if [info exists env(X11VNC_LOCALHOST_ENABLED)] { - set localhost 1 - } - checkbutton .pp.f.loc -relief raised -pady 3 -padx 3 -text "Listen on localhost" -variable localhost -font $bfont - pack .pp.f.l .pp.f.e -side left - pack .pp.f.loc .pp.f.ssl -side right - - if {$tkold} { - frame .pp.t -bd 1 -relief ridge - } else { - frame .pp.t -bd 1 -relief ridge -pady 2 - } - global file_transfer; set file_transfer "none" - if [info exists env(X11VNC_FILETRANSFER_ENABLED)] { - set file_transfer $env(X11VNC_FILETRANSFER_ENABLED) - } - label .pp.t.l -text "File Transfer: " -font $bfont - radiobutton .pp.t.none -text "None" -variable file_transfer -value "none" -font $bfont - radiobutton .pp.t.ultra -text "UltraVNC" -variable file_transfer -value "ultra" -font $bfont - radiobutton .pp.t.tight -text "TightVNC" -variable file_transfer -value "tight" -font $bfont - pack .pp.t.l .pp.t.none .pp.t.ultra .pp.t.tight -side left - - frame .pp.o -bd 1 -relief ridge - button .pp.o.ok -text "OK" -command "set port_reply 1; destroy .pp" -font $bfont - button .pp.o.cancel -text "Cancel" -command "set port_reply 0; destroy .pp" -font $bfont - pack .pp.o.ok .pp.o.cancel -side left -fill x -expand 1 - pack .pp.m -side top -fill x -expand 1 - pack .pp.f .pp.t .pp.o -side top -fill x - - focus .pp.f.e - .pp.f.e icursor end - - wm withdraw .pp - update - center_win .pp - - wm minsize .pp [winfo width .pp] [winfo height .pp] - - bind .pp.f.e <KeyPress-Return> "set port_reply 1; destroy .pp" - - vwait port_reply - - if {$port_reply} { - regsub -all {^:} $port_set "" port_set - regsub -all {[ \t]} $port_set "" port_set - if {[regexp {^[0-9][0-9]*$} $port_set]} { - if {$port_set < 0} { - set port_set [expr 0 - $port_set] - } elseif {$port_set < 200} { - set port_set [expr $port_set + 5900] - } - puts "$port_set:ssl${enable_ssl}:localhost$localhost:ft_$file_transfer" - } - } -} - -proc change_view_state {} { - global menu_var gui_current_state - - set new [get_view_variable] - - if {![info exists gui_current_state]} { - set gui_current_state "" - } - set old $gui_current_state - #puts "$old -> $new" - - if {$old == $new} { - return - } - - if {$old == "full" || $old == "icon" || $old == "tray"} { - ; - } else { - set old "none" - } - - if {$new == "full" || $new == "icon" || $new == "tray"} { - if {$old == "tray"} { - # sigh XReparentWindow would be too easy... - # undo_tray_embed - restart_everything $new - destroy . - exit - } - make_gui $new - if {$new == "tray"} { - wm withdraw . - } - } else { - set_view_variable $old - } -} - -proc setup_client_tail {} { - global client_tail - if {$client_tail != ""} { - fileevent $client_tail readable read_client_tail - } -} - -proc setup_client_sock {{enable 1}} { - global client_sock - if {$client_sock != ""} { - if {$enable} { - fileevent $client_sock readable read_client_sock - } else { - fileevent $client_sock readable "" - } - } -} - -proc setup_tray_embed {} { - update - set w [winfo width .] - set h [winfo height .] - if {$w < 24} { - set w 24 - } - if {$h < 24} { - set h 24 - } - wm minsize . $w $h - set wid [winfo id .] - push_new_value "remote-cmd" "remote-cmd" "trayembed:$wid" 0 -} - -proc restart_everything {gui_mode} { - global env gui_argv0 x11vnc_prog full_win - global icon_mode_at_startup - global tray_embed tray_running - if {$gui_mode == "full"} { - set env(X11VNC_ICON_MODE) 0 - } elseif {$gui_mode == "icon"} { - set env(X11VNC_ICON_MODE) 1 - } elseif {$gui_mode == "tray"} { - if {$tray_running} { - set env(X11VNC_ICON_MODE) "RUNNING" - } else { - set env(X11VNC_ICON_MODE) "TRAY" - } - } - puts stderr "" - puts stderr "tkx11vnc: restarting gui to leave tray mode." - puts stderr " new gui will be running in the background." - puts stderr " use kill(1) rather than Ctrl-C to kill it." - puts stderr "" - if {[info exists env(X11VNC_RESTART_DEPTH)]} { - set n $env(X11VNC_RESTART_DEPTH) - incr n - set env(X11VNC_RESTART_DEPTH) $n - } else { - set env(X11VNC_RESTART_DEPTH) 0 - } - set env(X11VNC_ICON_SETPASS) "" - - if {![info exists env(X11VNC_WISHCMD)]} { - puts stderr "failure in restart_everything." - exit 1; - } - - set code [exec $x11vnc_prog -printgui] - if {[string length $code] < 20000} { - puts stderr "failure in restart_everything." - exit 1; - } - set tmp "/tmp/x11vnc[pid]" - append tmp [clock clicks] - set tmp2 "" - catch {set tmp2 [exec mktemp $tmp.XXXXXX 2>/dev/null]} - if {$tmp2 != "" && [file exists $tmp2]} { - set tmp $tmp2 - } else { - file delete -force $tmp - if {[file exists $tmp]} { - puts stderr "failure in restart_everything." - exit 1; - } - } - set fh [open $tmp "a"] - if {![file owned $tmp]} { - puts stderr "failure in restart_everything." - exit 1; - } - file attributes $tmp -permissions "0400" - puts $fh $code - close $fh - - #puts stderr [exec ls -l $tmp] - - wm withdraw . - catch {wm withdraw $full_win} - update - - exec $env(X11VNC_WISHCMD) $tmp & - after 2000 - file delete -force $tmp - - destroy . - exit -} - -proc undo_tray_embed {} { - set wid [winfo id .] - push_new_value "remote-cmd" "remote-cmd" "trayunembed:$wid" 0 -} - -############################################################################ -# main: - -if [info exists env(X11VNC_GUI_TIME)] { - dtime M -} - -wm withdraw . - -global env x11vnc_prog x11vnc_cmdline x11vnc_xdisplay x11vnc_connect; -global x11vnc_xdisplay0 -global x11vnc_client_file x11vnc_gui_geom x11vnc_started vnc_url -global x11vnc_gui_params -global x11vnc_auth_file x11vnc_connect_file beginner_mode simple_gui_created -global helpall helptext helpremote helplabel hostname osname -global all_settings reply_xdisplay always_update -global max_text_height max_text_width -global text_height -global menu_var unset_str menus_disabled -global bfont ffont sfont snfont old_labels have_labelframes -global connected_to_x11vnc -global cache_all_query_vars -global last_query_all_time query_all_freq client_tail client_sock client_info_read -global icon_mode icon_mode_at_startup x11vnc_icon_mode -global tray_embed tray_running icon_setpasswd icon_embed_id -global icon_noadvanced icon_minimal -global make_gui_count text_area_str -global gui_argv0 gui_start_mode -global screen_height screen_width - -set unset_str "(unset)" -set vnc_url $unset_str -set connected_to_x11vnc 0 -set menus_disabled 0 -set max_text_height 40 -set max_text_width 90 -set text_height 14 -set bfont "-adobe-helvetica-bold-r-*-*-*-120-*-*-*-*-*-*" -set sfont "-adobe-helvetica-bold-r-*-*-*-100-*-*-*-*-*-*" -set snfont "-adobe-helvetica-medium-r-*-*-*-100-*-*-*-*-*-*" -set ffont "fixed" - -set got_helv 0 -catch { - foreach fam [font families] { - if {$fam == "helvetica"} { - set got_helv 1 - } - if {$fam == "Helvetica"} { - set got_helv 1 - } - } -} - -if {$got_helv} { - set bfont "Helvetica -12 bold" - set sfont "Helvetica -10 bold" - set snfont "Helvetica -10" -} - -set ls "" -catch {set ls [font metrics $bfont -linespace]} -if {$ls != "" && $ls > 14} { - # some recent setups have BIG rendering for the above fonts. - # on recent (8/08) debian these are really ragged: - set bfont "-adobe-helvetica-bold-r-*-*-*-90-*-*-*-*-*-*" - set sfont "-adobe-helvetica-bold-r-*-*-*-75-*-*-*-*-*-*" - set snfont "-adobe-helvetica-medium-r-*-*-*-75-*-*-*-*-*-*" - - set ls "" - catch {set ls [font metrics $bfont -linespace]} - if {$ls != "" && $ls < 14} { - # these are bigger but look better... but for how long? - set bfont "-adobe-helvetica-bold-r-*-*-*-100-*-*-*-*-*-*" - set sfont "-adobe-helvetica-bold-r-*-*-*-80-*-*-*-*-*-*" - set snfont "-adobe-helvetica-medium-r-*-*-*-80-*-*-*-*-*-*" - - # maybe consider... {-font font Font {Helvetica -12 bold} {Helvetica -12 bold}} - # or stick with system font like ssvnc. - } -} - -# need to check if "fixed" font under XFT on tk8.5 is actually fixed width!! -set ls "" -catch {set ls [font metrics $ffont -linespace]} -set fs "" -catch {set fs [font metrics $ffont -fixed]} -set redo 0 -if {$fs != "" && $fs != "1"} { - set redo 1 -} -if {$ls != "" && $ls > 14} { - set redo 1 -} -if {$redo} { - foreach fn [font names] { - if {$fn == "TkFixedFont"} { - set ffont $fn - break - } - } -} - -set help_indent 24; -set reply_xdisplay "" -set all_settings "None so far." -set always_update 1 -set cache_all_query_vars "" -set query_all_freq 120 -set last_query_all_time [clock seconds] -set client_tail "" -set client_sock "" -set client_info_read 0 -set make_gui_count 0 -set text_area_str "" -set gui_argv0 $argv0 -set gui_start_mode "" - -if {$tk_version < 8.0} { - puts stderr "" - puts stderr "*** tkx11vnc: tk version is old $tk_version, please use 8.0 or higher." - puts stderr "*** will try to continue with reduced functionality..." - puts stderr "" -} -if {[regexp {^[34]} $tk_version] || $tk_version == "8.0"} { - set old_labels 1 -} else { - set old_labels 0 -} -set have_labelframes 1 -if {$tk_version < 8.4} { - set have_labelframes 0 -} - -set screen_height [winfo screenheight .] -set screen_width [winfo screenwidth .] -if {$screen_height < 700} { - # short screen, netbook? - set max_text_height 30 - if {$screen_height < 500} { - # short screen, PDA? - set max_text_height 22 - set text_height 13 - if {$screen_height <= 360} { - # very short. - set max_text_height 16 - set max_text_width 60 - set text_height 11 - } - } -} -if {[info exists env(X11VNC_GUI_TEXT_HEIGHT)]} { - set max_text_height $env(X11VNC_GUI_TEXT_HEIGHT) -} -if {[info exists env(X11VNC_GUI_TEXT_WIDTH)]} { - set max_text_width $env(X11VNC_GUI_TEXT_WIDTH) -} - -if {"$argv" == "-spit"} { - set fh [open $argv0 r] - puts "#ifndef _TKX11VNC_H" - puts "#define _TKX11VNC_H" - puts "#ifdef NOGUI" - puts "char gui_code\[\] = \"\";" - puts "#else" - puts "/*" - puts " * tkx11vnc.h: generated by 'tkx11vnc -spit'" - puts " * Abandon all hope, ye who enter here..." - puts " * ...edit tkx11vnc instead." - puts " */" - puts " char gui_code\[\] =" - while {[gets $fh line] > -1} { - regsub -all {\\} $line {\\\\} line - regsub -all {"} $line {\\"} line - puts "\"$line\\n\"" - } - puts "#endif" - puts "/* ifdef NOGUI */" - puts "#endif" - puts "/* ifndef _TKX11VNC_H */" - close $fh - puts ";" - exit 0 -} - -set_view_variable "full" - -#puts [exec env | grep X11VNC] - -# Read environment for clues: - -set x11vnc_client_file ""; -if {[info exists env(X11VNC_CLIENT_FILE)]} { - set x11vnc_client_file $env(X11VNC_CLIENT_FILE); - set file $x11vnc_client_file - - set client_tail "" - if {[file exists $file] && [file isfile $file]} { - if {[file readable $file] && [file owned $file]} { - set client_tail [open "|tail -f $x11vnc_client_file" "r"] - } - } - if {$client_tail != ""} { - gets $client_tail tmp - if [eof $client_tail] { -#puts "eof $client_tail" - clean_client_tail - set client_tail "" - } - } - catch {file delete -force $x11vnc_client_file} -} - -if {[info exists env(X11VNC_PROG)]} { - set x11vnc_prog $env(X11VNC_PROG); -} else { - set x11vnc_prog "x11vnc"; -} - -if {[info exists env(X11VNC_CMDLINE)]} { - set x11vnc_cmdline $env(X11VNC_CMDLINE); -} else { - set x11vnc_cmdline ""; -} - -if {[info exists env(X11VNC_CONNECT)]} { - set x11vnc_connect 1 -} else { - set x11vnc_connect 0; -} - -if {[info exists env(X11VNC_GUI_GEOM)]} { - set x11vnc_gui_geom $env(X11VNC_GUI_GEOM); -} else { - set x11vnc_gui_geom "" -} -if {[info exists env(X11VNC_GUI_PARAMS)]} { - set x11vnc_gui_params $env(X11VNC_GUI_PARAMS); -} else { - set x11vnc_gui_params "" -} - -if {[info exists env(X11VNC_FONT_BOLD)]} { - set bfont $env(X11VNC_FONT_BOLD) -} -if {[info exists env(X11VNC_FONT_BOLD_SMALL)]} { - set sfont $env(X11VNC_FONT_BOLD_SMALL) -} -if {[info exists env(X11VNC_FONT_REG_SMALL)]} { - set snfont $env(X11VNC_FONT_REG_SMALL) -} -if {[info exists env(X11VNC_FONT_FIXED)]} { - set ffont $env(X11VNC_FONT_FIXED) -} - -if {[info exists env(X11VNC_CONNECT_FILE)]} { - set x11vnc_connect_file $env(X11VNC_CONNECT_FILE); -} else { - set x11vnc_connect_file ""; -} - -set x11vnc_started 0 -if {[info exists env(X11VNC_STARTED)]} { - set x11vnc_started 1 -} - -set x11vnc_xdisplay "" -if {[info exists env(X11VNC_XDISPLAY)]} { - set x11vnc_xdisplay $env(X11VNC_XDISPLAY); - set x11vnc_connect 1 - -} elseif {$argv != "" && [regexp {:[0-9]} $argv]} { - set env(X11VNC_XDISPLAY) "$argv" - set x11vnc_xdisplay "$argv" - set x11vnc_connect 1 - -} elseif {[info exists env(DISPLAY)]} { - set x11vnc_xdisplay $env(DISPLAY); -} else { - set x11vnc_xdisplay ":0"; -} -set x11vnc_xdisplay0 $x11vnc_xdisplay - -if {[info exists env(X11VNC_AUTH_FILE)]} { - set x11vnc_auth_file $env(X11VNC_AUTH_FILE) -} else { - set x11vnc_auth_file "" -} - -set simple_gui_created 0 -if {[info exists env(X11VNC_SIMPLE_GUI)]} { - set beginner_mode 1 -} else { - set beginner_mode 0 -} - -set icon_mode 0 -set x11vnc_icon_mode 0 -set tray_embed 0 -set tray_running 0 - -if {![info exists env(X11VNC_ICON_MODE_AT_STARTUP)]} { - if {[info exists env(X11VNC_ICON_MODE)]} { - if {$env(X11VNC_ICON_MODE) != 0} { - set env(X11VNC_ICON_MODE_AT_STARTUP) 1 - } else { - set env(X11VNC_ICON_MODE_AT_STARTUP) 0 - } - } else { - set env(X11VNC_ICON_MODE_AT_STARTUP) 0 - } -} -set icon_mode_at_startup $env(X11VNC_ICON_MODE_AT_STARTUP) - -if {![info exists env(X11VNC_ICON_MODE)]} { - set icon_mode 0 -} elseif {$env(X11VNC_ICON_MODE) == "" || $env(X11VNC_ICON_MODE) == "0"} { - set icon_mode 0 -} else { - set icon_mode 1 - set_view_variable "icon" - if [regexp -nocase {TRAY} $env(X11VNC_ICON_MODE)] { - set tray_embed 1 - } - if [regexp -nocase {RUNNING} $env(X11VNC_ICON_MODE)] { - set tray_running 1 - } -} - -set icon_setpasswd 0 -if {[info exists env(X11VNC_ICON_SETPASS)]} { - if {$env(X11VNC_ICON_SETPASS) != ""} { - set icon_setpasswd 1 - } -} - -set icon_noadvanced 0 -if {[info exists env(X11VNC_ICON_NOADVANCED)]} { - set icon_noadvanced 1 -} - -set icon_minimal 0 -if {[info exists env(X11VNC_ICON_MINIMAL)]} { - set icon_minimal 1 -} - -if {[info exists env(X11VNC_ICON_EMBED_ID)]} { - set icon_embed_id $env(X11VNC_ICON_EMBED_ID) -} else { - set icon_embed_id "" -} - - -set hostname [exec uname -n] -set osname [exec uname] - -if {[regexp -nocase {IRIX} $osname]} { - # IRIX "fixed" font is huge and doublespaced... - set ffont $snfont -} -if {[regexp -nocase {Darwin} $osname]} { - set ffont {Monaco 10} - set bfont {system} -} - -if {"$argv" == "-portprompt"} { - do_port_prompt - exit 0 -} - -#puts [exec env] -#puts "x11vnc_xdisplay: $x11vnc_xdisplay" - -set env(X11VNC_STD_HELP) 1 - -# scrape the help output for the text and remote control vars: -parse_help; -parse_remote_help; -parse_query_help; - -# tweaks to duplicate help text: -tweak_remote_help lock deny -tweak_remote_help unlock deny - -tweak_both quiet q -tweak_help logfile o -tweak_both xwarppointer xwarp -tweak_both screen_blank sb - -set_template - -set_name "tkx11vnc" - -key_bindings; - -get_default_vars - -dtime D - -proc check_setpasswd {} { - global env icon_setpasswd - global do_props_msg - set do_props_msg "" - if {$icon_setpasswd} { - set m "\n" - set m "${m} Note the x11vnc icon in the system tray.\n" - set m "${m} This panel is its 'Properties' dialog.\n" - set m "${m}\n" - set m "${m} To specify a Session Password and to\n" - set m "${m} allow VNC viewers to connect, follow\n" - set m "${m} these steps:\n" - set m "${m}\n" - set m "${m} Enter a passwd in the Password field\n" - set m "${m} (it can be left blank.) You can also\n" - set m "${m} supply a ViewOnly passwd if desired.\n" - set m "${m}\n" - set m "${m} Set 'Accept Connections' and then Press \n" - set m "${m} 'Apply' to allow incoming connections.\n" - set m "${m}\n" - set m "${m} No Viewer can connect until you do this.\n" - set m "${m}\n" - set m "${m} The passwords are only for this x11vnc\n" - set m "${m} session and are not saved. Run x11vnc\n" - set m "${m} manually for more control (e.g. -rfbauth \n" - set m "${m} for a saved password.)\n" - set m "${m}\n" - set m "${m} See 'Help' for details on each option.\n" - - global x11vnc_cmdline - - set dossl 0 - if {[info exists x11vnc_cmdline]} { - if [regexp -- {-ssl} $x11vnc_cmdline] { - set dossl 1 - } - } - if {$dossl || [info exists env(X11VNC_GOT_SSL)]} { - set m "${m}\n" - set m "${m} SSL encryption mode active. You can\n" - set m "${m} find your Public Cert in the Logfile\n" - set m "${m} and also the ~/.vnc/certs directory.\n" - } - - if {[info exists env(X11VNC_SETPASS_FAIL)]} { - set pp 5900 - if {[info exists env(X11VNC_GOT_RFBPORT_VAL)]} { - if {$env(X11VNC_GOT_RFBPORT_VAL) > 0} { - set pp $env(X11VNC_GOT_RFBPORT_VAL) - } - } - - set m " The x11vnc program failed to start! \n" - set m "${m}\n" - set m "${m} Maybe there is another VNC server\n" - set m "${m} already listening on port $pp?\n" - set m "${m}\n" - set m "${m} You will need to start over after\n" - set m "${m} you make sure x11vnc can start.\n" - } - - set do_props_msg $m - do_props - } -} - -if {0} { - if {[info exists env(X11VNC_ICON_SETPASS)]} { - if {$env(X11VNC_ICON_SETPASS) == "2"} { - global icon_mode_at_startup icon_mode - set icon_mode_at_startup 1 - set icon_mode 2 - } - } -} - -if {$icon_mode} { - if {$icon_mode == 2} { - make_gui "full" - } elseif {$tray_embed} { - make_gui "tray" - } else { - make_gui "icon" - } - dtime G - old_balloon - check_setpasswd - push_new_value "remote-cmd" "remote-cmd" "Q:clients" 1 -} else { - make_gui "full" - dtime G - check_setpasswd -} - - -# main loop. |
