/* * QEMU PPC PREP hardware System Emulator * * Copyright (c) 2003-2007 Jocelyn Mayer * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "hw/hw.h" #include "hw/timer/m48t59.h" #include "hw/i386/pc.h" #include "hw/char/serial.h" #include "hw/block/fdc.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/isa/isa.h" #include "hw/pci/pci.h" #include "hw/pci/pci_host.h" #include "hw/ppc/ppc.h" #include "hw/boards.h" #include "qemu/log.h" #include "hw/ide.h" #include "hw/loader.h" #include "hw/timer/mc146818rtc.h" #include "hw/isa/pc87312.h" #include "sysemu/block-backend.h" #include "sysemu/arch_init.h" #include "sysemu/qtest.h" #include "exec/address-spaces.h" #include "elf.h" //#define HARD_DEBUG_PPC_IO //#define DEBUG_PPC_IO /* SMP is not enabled, for now */ #define MAX_CPUS 1 #define MAX_IDE_BUS 2 #define BIOS_SIZE (1024 * 1024) #define BIOS_FILENAME "ppc_rom.bin" #define KERNEL_LOAD_ADDR 0x01000000 #define INITRD_LOAD_ADDR 0x01800000 #if defined (HARD_DEBUG_PPC_IO) && !defined (DEBUG_PPC_IO) #define DEBUG_PPC_IO #endif #if defined (HARD_DEBUG_PPC_IO) #define PPC_IO_DPRINTF(fmt, ...) \ do { \ if (qemu_loglevel_mask(CPU_LOG_IOPORT)) { \ qemu_log("%s: " fmt, __func__ , ## __VA_ARGS__); \ } else { \ printf("%s : " fmt, __func__ , ## __VA_ARGS__); \ } \ } while (0) #elif defined (DEBUG_PPC_IO) #define PPC_IO_DPRINTF(fmt, ...) \ qemu_log_mask(CPU_LOG_IOPORT, fmt, ## __VA_ARGS__) #else #define PPC_IO_DPRINTF(fmt, ...) do { } while (0) #endif /* Constants for devices init */ static const int ide_iobase[2] = { 0x1f0, 0x170 }; static const int ide_iobase2[2] = { 0x3f6, 0x376 }; static const int ide_irq[2] = { 13, 13 }; #define NE2000_NB_MAX 6 static uint32_t ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 }; static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; /* ISA IO ports bridge */ #define PPC_IO_BASE 0x80000000 /* PowerPC control and status registers */ #if 0 // Not used static struct { /* IDs */ uint32_t veni_devi; uint32_t revi; /* Control and status */ uint32_t gcsr; uint32_t xcfr; uint32_t ct32; uint32_t mcsr; /* General purpose registers */ uint32_t gprg[6]; /* Exceptions */ uint32_t feen; uint32_t fest; uint32_t fema; uint32_t fecl; uint32_t eeen; uint32_t eest; uint32_t eecl; uint32_t eeint; uint32_t eemck0; uint32_t eemck1; /* Error diagnostic */ } XCSR; static void PPC_XCSR_writeb (void *opaque, hwaddr addr, uint32_t value) { printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, value); } static void PPC_XCSR_writew (void *opaque, hwaddr addr, uint32_t value) { printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, value); } static void PPC_XCSR_writel (void *opaque, hwaddr addr, uint32_t value) { printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, value); } static uint32_t PPC_XCSR_readb (void *opaque, hwaddr addr) { uint32_t retval = 0; printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, retval); return retval; } static uint32_t PPC_XCSR_readw (void *opaque, hwaddr addr) { uint32_t retval = 0; printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, retval); return retval; } static uint32_t PPC_XCSR_readl (void *opaque, hwaddr addr) { uint32_t retval = 0; printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, retval); return retval; } static const MemoryRegionOps PPC_XCSR_ops = { .old_mmio = { .read = { PPC_XCSR_readb, PPC_XCSR_readw, PPC_XCSR_readl, }, .write = { PPC_XCSR_writeb, PPC_XCSR_writew, PPC_XCSR_writel, }, }, .endianness = DEVICE_LITTLE_ENDIAN, }; #endif /* Fake super-io ports for PREP platform (Intel 82378ZB) */ typedef struct sysctrl_t { qemu_irq reset_irq; M48t59State *nvram; uint8_t state; uint8_t syscontrol; int contiguous_map; qemu_irq contiguous_map_irq; int endian; } sysctrl_t; enum { STATE_HARDFILE = 0x01, }; static sysctrl_t *sysctrl; static void PREP_io_800_writeb (void *opaque, uint32_t addr, uint32_t val) { sysctrl_t *sysctrl = opaque; PPC_IO_DPRINTF("0x%08" PRIx32 " => 0x%02" PRIx32 "\n", addr - PPC_IO_BASE, val); switch (addr) { case 0x0092: /* Special port 92 */ /* Check soft reset asked */ if (val & 0x01) { qemu_irq_raise(sysctrl->reset_irq); } else { qemu_irq_lower(sysctrl->reset_irq); } /* Check LE mode */ if (val & 0x02) { sysctrl->endian = 1; } else { sysctrl->endian = 0; } break; case 0x0800: /* Motorola CPU configuration register : read-only */ break; case 0x0802: /* Motorola base module feature register : read-only */ break; case 0x0803: /* Motorola base module status register : read-only */ break; case 0x0808: /* Hardfile light register */ if (val & 1) sysctrl->state |= STATE_HARDFILE; else sysctrl->state &= ~STATE_HARDFILE; break; case 0x0810: /* Password protect 1 register */ if (sysctrl->nvram != NULL) m48t59_toggle_lock(sysctrl->nvram, 1); break; case 0x0812: /* Password protect 2 register */ if (sysctrl->nvram != NULL) m48t59_toggle_lock(sysctrl->nvram, 2); break; case 0x0814: /* L2 invalidate register */ // tlb_flush(first_cpu, 1); break; case 0x081C: /* system control register */ sysctrl->syscontrol = val & 0x0F; break; case 0x0850: /* I/O map type register */ sysctrl->contiguous_map = val & 0x01; qemu_set_irq(sysctrl->contiguous_map_irq, sysctrl->contiguous_map); break; default: printf("ERROR: unaffected IO port write: %04" PRIx32 " => %02" PRIx32"\n", addr, val); break; } } static uint32_t PREP_io_800_readb (void *opaque, uint32_t addr) { sysctrl_t *sysctrl = opaque; uint32_t retval = 0xFF; switch (addr) { case 0x0092: /* Special port 92 */ retval = sysctrl->endian << 1; break; case 0x0800: /* Motorola CPU configuration register */ retval = 0xEF; /* MPC750 */ break; case 0x0802: /* Motorola Base module feature register */ retval = 0xAD; /* No ESCC, PMC slot neither ethernet */ break; case 0x0803: /* Motorola base module status register */ retval = 0xE0; /* Standard MPC750 */ break; case 0x080C: /* Equipment present register: * no L2 cache * no upgrade processor * no cards in PCI slots * SCSI fuse is bad */ retval = 0x3C; break; case 0x0810: /* Motorola base module extended feature register */ retval = 0x39; /* No USB, CF and PCI bridge. NVRAM present */ break; case 0x0814: /* L2 invalidate: don't care */ break; case 0x0818: /* Keylock */ retval = 0x00; break; case 0x081C: /* system control register * 7 - 6 / 1 - 0: L2 cache enable */ retval = sysctrl->syscontrol; break; case 0x0823: /* */ retval = 0x03; /* no L2 cache */ break; case 0x0850: /* I/O map type register */ retval = sysctrl->contiguous_map; break; default: printf("ERROR: unaffected IO port: %04" PRIx32 " read\n", addr); break; } PPC_IO_DPRINTF("0x%08" PRIx32 " <= 0x%02" PRIx32 "\n", addr - PPC_IO_BASE, retval); return retval; } #define NVRAM_SIZE 0x2000 static void cpu_request_exit(void *opaque, int irq, int level) { CPUState *cpu = current_cpu; if (cpu && level) { cpu_exit(cpu); } } static void ppc_prep_reset(void *opaque) { PowerPCCPU *cpu = opaque; cpu_reset(CPU(cpu)); } static const MemoryRegionPortio prep_portio_list[] = { /* System control ports */ { 0x0092, 1, 1, .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, { 0x0800, 0x52, 1, .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, /* Special port to get debug messages from Open-Firmware */ { 0x0F00, 4, 1, .write = PPC_debug_write, }, PORTIO_END_OF_LIST(), }; static PortioList prep_port_list; /* PowerPC PREP hardware initialisation */ static void ppc_prep_init(MachineState *machine) { ram_addr_t ram_size = machine->ram_size; const char *cpu_model = machine->cpu_model; const char *kernel_filename = machine->kernel_filename; const char *kernel_cmdline = machine->kernel_cmdline; const char *initrd_filename = machine->initrd_filename; const char *boot_device = machine->boot_order; MemoryRegion *sysmem = get_system_memory(); PowerPCCPU *cpu = NULL; CPUPPCState *env = NULL; nvram_t nvram; M48t59State *m48t59; #if 0 MemoryRegion *xcsr = g_new(MemoryRegion, 1); #endif int linux_boot, i, nb_nics1; MemoryRegion *ram = g_new(MemoryRegion, 1); uint32_t kernel_base, initrd_base; long kernel_size, initrd_size; DeviceState *dev; PCIHostState *pcihost; PCIBus *pci_bus; PCIDevice *pci; ISABus *isa_bus; ISADevice *isa; qemu_irq *cpu_exit_irq; int ppc_boot_device; DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; sysctrl = g_malloc0(sizeof(sysctrl_t)); linux_boot = (kernel_filename != NULL); /* init CPUs */ if (cpu_model == NULL) cpu_model = "602"; for (i = 0; i < smp_cpus; i++) { cpu = cpu_ppc_init(cpu_model); if (cpu == NULL) { fprintf(stderr, "Unable to find PowerPC CPU definition\n"); exit(1); } env = &cpu->env; if (env->flags & POWERPC_FLAG_RTC_CLK) { /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */ cpu_ppc_tb_init(env, 7812500UL); } else { /* Set time-base frequency to 100 Mhz */ cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL); } qemu_register_reset(ppc_prep_reset, cpu); } /* allocate RAM */ memory_region_allocate_system_memory(ram, NULL, "ppc_prep.ram", ram_size); memory_region_add_subregion(sysmem, 0, ram); if (linux_boot) { kernel_base = KERNEL_LOAD_ADDR; /* now we can load the kernel */ kernel_size = load_image_targphys(kernel_filename, kernel_base, ram_size - kernel_base); if (kernel_size < 0) { hw_error("qemu: could not load kernel '%s'\n", kernel_filename); exit(1); } /* load initrd */ if (initrd_filename) { initrd_base = INITRD_LOAD_ADDR; initrd_size = load_image_targphys(initrd_filename, initrd_base, ram_size - initrd_base); if (initrd_size < 0) { hw_error("qemu: could not load initial ram disk '%s'\n", initrd_filename); } } else { initrd_base = 0; initrd_size = 0; } ppc_boot_device = 'm'; } else { kernel_base = 0; kernel_size = 0; initrd_base = 0; initrd_size = 0; ppc_boot_device = '\0'; /* For now, OHW cannot boot from the network. */ for (i = 0; boot_device[i] != '\0'; i++) { if (boot_device[i] >= 'a' && boot_device[i] <= 'f') { ppc_boot_device = boot_device[i]; break; } } if (ppc_boot_device == '\0') { fprintf(stderr, "No valid boot device for Mac99 machine\n"); exit(1); } } if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) { hw_error("Only 6xx bus is supported on PREP machine\n"); } dev = qdev_create(NULL, "raven-pcihost"); if (bios_name == NULL) { bios_name = BIOS_FILENAME; } qdev_prop_set_string(dev, "bios-name", bios_name); qdev_prop_set_uint32(dev, "elf-machine", ELF_MACHINE); pcihost = PCI_HOST_BRIDGE(dev); object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL); qdev_init_nofail(dev); pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); if (pci_bus == NULL) { fprintf(stderr, "Couldn't create PCI host controller.\n"); exit(1); } sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0); /* PCI -> ISA bridge */ pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378"); cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1); cpu = POWERPC_CPU(first_cpu); qdev_connect_gpio_out(&pci->qdev, 0, cpu->env.irq_inputs[PPC6xx_INPUT_INT]); qdev_connect_gpio_out(&pci->qdev, 1, *cpu_exit_irq); sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9)); sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11)); sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9)); sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11)); isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci), "isa.0")); /* Super I/O (parallel + serial ports) */ isa = isa_create(isa_bus, TYPE_PC87312); dev = DEVICE(isa); qdev_prop_set_uint8(dev, "config", 13); /* fdc, ser0, ser1, par0 */ qdev_init_nofail(dev); /* init basic PC hardware */ pci_vga_init(pci_bus); nb_nics1 = nb_nics; if (nb_nics1 > NE2000_NB_MAX) nb_nics1 = NE2000_NB_MAX; for(i = 0; i < nb_nics1; i++) { if (nd_table[i].model == NULL) { nd_table[i].model = g_strdup("ne2k_isa"); } if (strcmp(nd_table[i].model, "ne2k_isa") == 0) { isa_ne2000_init(isa_bus, ne2000_io[i], ne2000_irq[i], &nd_table[i]); } else { pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL); } } ide_drive_get(hd, ARRAY_SIZE(hd)); for(i = 0; i < MAX_IDE_BUS; i++) { isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i], hd[2 * i], hd[2 * i + 1]); } isa_create_simple(isa_bus, "i8042"); cpu = POWERPC_CPU(first_cpu); sysctrl->reset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET]; portio_list_init(&prep_port_list, NULL, prep_portio_list, sysctrl, "prep"); portio_list_add(&prep_port_list, isa_address_space_io(isa), 0x0); /* PowerPC control and status register group */ #if 0 memory_region_init_io(xcsr, NULL, &PPC_XCSR_ops, NULL, "ppc-xcsr", 0x1000); memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr); #endif if (usb_enabled()) { pci_create_simple(pci_bus, -1, "pci-ohci"); } m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59); if (m48t59 == NULL) return; sysctrl->nvram = m48t59; /* Initialise NVRAM */ nvram.opaque = m48t59; nvram.read_fn = &m48t59_read; nvram.write_fn = &m48t59_write; PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "PREP", ram_size, ppc_boot_device, kernel_base, kernel_size, kernel_cmdline, initrd_base, initrd_size, /* XXX: need an option to load a NVRAM image */ 0, graphic_width, graphic_height, graphic_depth); } static QEMUMachine prep_machine = { .name = "prep", .desc = "PowerPC PREP platform", .init = ppc_prep_init, .max_cpus = MAX_CPUS, .default_boot_order = "cad", }; static void prep_machine_init(void) { qemu_register_machine(&prep_machine); } machine_init(prep_machine_init);