From 45fdd3bf5a00466cb0f762c638291a5446773dc9 Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Tue, 11 Jun 2013 10:59:09 +1000 Subject: intc/xilinx_intc: Handle level interrupt retriggering Acking a level sensitive interrupt should have no effect if the interrupt pin is still asserted. The current implementation requires and edge condition to occur for setting a level sensitive IRQ, which means an ACK can clear a level sensitive interrupt, until the original source strobes the interrupt again. Fix by keeping track of the interrupt pin state and setting ISR based on this every time update_irq() is called. Signed-off-by: Peter Crosthwaite Signed-off-by: Edgar E. Iglesias --- hw/intc/xilinx_intc.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'hw/intc/xilinx_intc.c') diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index d243a00..09b4453 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -49,11 +49,19 @@ struct xlx_pic /* Runtime control registers. */ uint32_t regs[R_MAX]; + /* state of the interrupt input pins */ + uint32_t irq_pin_state; }; static void update_irq(struct xlx_pic *p) { uint32_t i; + + /* level triggered interrupt */ + if (p->regs[R_MER] & 2) { + p->regs[R_ISR] |= p->irq_pin_state & ~p->c_kind_of_intr; + } + /* Update the pending register. */ p->regs[R_IPR] = p->regs[R_ISR] & p->regs[R_IER]; @@ -135,7 +143,13 @@ static void irq_handler(void *opaque, int irq, int level) return; } - p->regs[R_ISR] |= (level << irq); + /* edge triggered interrupt */ + if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { + p->regs[R_ISR] |= (level << irq); + } + + p->irq_pin_state &= ~(1 << irq); + p->irq_pin_state |= level << irq; update_irq(p); } -- cgit v1.1