From ee3659e38580c64f7df74984ef09a2742958c8ab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 10 Feb 2010 23:37:37 +0100 Subject: scsi: add topology support Export the physical block size in the READ CAPACITY (16) command, and add the new block limits VPD page to export the minimum and optiomal I/O sizes. Note that we also need to bump the scsi revision level to SPC-2 as that is the minimum requirement by at least the Linux kernel to try READ CAPACITY (16) first and look at the block limits VPD page. Signed-off-by: Christoph Hellwig Signed-off-by: Anthony Liguori --- hw/scsi-disk.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index d510da4..b2f61fe 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -349,10 +349,11 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) case 0x00: /* Supported page codes, mandatory */ DPRINTF("Inquiry EVPD[Supported pages] " "buffer size %zd\n", req->cmd.xfer); - outbuf[buflen++] = 3; // number of pages + outbuf[buflen++] = 4; // number of pages outbuf[buflen++] = 0x00; // list of supported pages (this page) outbuf[buflen++] = 0x80; // unit serial number outbuf[buflen++] = 0x83; // device identification + outbuf[buflen++] = 0xb0; // block device characteristics break; case 0x80: /* Device serial number, optional */ @@ -394,6 +395,27 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) buflen += id_len; break; } + case 0xb0: /* block device characteristics */ + { + unsigned int min_io_size = s->qdev.conf.min_io_size >> 9; + unsigned int opt_io_size = s->qdev.conf.opt_io_size >> 9; + + /* required VPD size with unmap support */ + outbuf[3] = buflen = 0x3c; + + memset(outbuf + 4, 0, buflen - 4); + + /* optimal transfer length granularity */ + outbuf[6] = (min_io_size >> 8) & 0xff; + outbuf[7] = min_io_size & 0xff; + + /* optimal transfer length */ + outbuf[12] = (opt_io_size >> 24) & 0xff; + outbuf[13] = (opt_io_size >> 16) & 0xff; + outbuf[14] = (opt_io_size >> 8) & 0xff; + outbuf[15] = opt_io_size & 0xff; + break; + } default: BADF("Error: unsupported Inquiry (EVPD[%02X]) " "buffer size %zd\n", page_code, req->cmd.xfer); @@ -440,7 +462,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) memcpy(&outbuf[32], s->version ? s->version : QEMU_VERSION, 4); /* Identify device as SCSI-3 rev 1. Some later commands are also implemented. */ - outbuf[2] = 3; + outbuf[2] = 5; outbuf[3] = 2; /* Format 2 */ if (buflen > 36) { @@ -794,6 +816,8 @@ static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf) outbuf[9] = 0; outbuf[10] = s->cluster_size * 2; outbuf[11] = 0; + outbuf[12] = 0; + outbuf[13] = get_physical_block_exp(&s->qdev.conf); /* Protection, exponent and lowest lba field left blank. */ buflen = req->cmd.xfer; break; -- cgit v1.1