| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
| |
Almost dead code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
|
|
| |
We should avoid accessing env at translation stage, except of course for
static values like the supported features.
Remove variables copied from env in DisasContext and use the TB flags
instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit fd4bab102 PC is restored in case of exception through code
retranslation. While it is clearly the thing to do in case it is not
not known if an helper is going to trigger an exception or not
(e.g. for load/store, FPU, etc.), it just make things slower when the
exception is already known at translation time.
Partially revert this commit and save PC in the TCG code. Set bstate to
BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep
helper. Make all the exception helpers to call raise_exception and mark
it as noreturn.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
| |
gen_clr_t() and gen_set_t() have very few callers and can be remplaced
by a single line. Remove them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
It's possible swap the two 16-bit words of a 32-bit register using a
rotation. If the TCG target doesn't implement rotation, the replacement
code is similar to the previously implemented code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
The register being 32 bit long, after a shift to the right by 16 bits,
the upper 16 bit are already cleared. There is no need to call ext16u
to clear them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
addv and subv helpers implementation is directly copied from the SH4
manual and looks quite complex. It is however possible to explain it
without branches, and is therefore possible to implement it with TCG.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
| |
Now that setcond is available, the addc and subc can easily be
implemented using TCG.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
| |
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as
SH4 is always returning a default NaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
| |
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
| |
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
| |
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
|
|
| |
Also drop duplicate occurrence of device-hotplug.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
| |
Turn cpu_init macro into a static inline function returning
CPUSH4State for backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
|
|
|
|
| |
Move code from cpu_sh4_init() into a QOM initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
|
|
|
|
|
| |
Move code from cpu_state_reset() to QOM superh_cpu_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
|
|
|
|
|
|
|
| |
Embed CPUSH4State as first member of SuperHCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
|
|
|
|
|
|
|
| |
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
| |
Scripted conversion:
sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc]
sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
| |
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
| |
Remove some include statements which are not needed.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
|
|
|
|
|
|
|
|
|
|
|
| |
ocbp and ocbwb controls the writeback of a cache line to memory. They
are supposed to do nothing in case of a cache miss. Given QEMU only
partially emulate caches, it is safe to ignore these instructions.
This fixes a kernel oops when trying to access an rtl8139 NIC with
recent versions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Coverity complained about right shifts of opcode (16, 18) which were
larger than the size of opcode (16 bit).
Using the correct shift values fixes this.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Cc: Richard Henderson <rth@twiddle.net>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|/
|
|
|
| |
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
|
|
|
|
|
| |
Pass CPUState pointer to tlb_fill() instead of architecture local
cpu_single_env hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
| |
qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
| |
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
| |
Most exec-all.h include directives are now useless, remove them.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
| |
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is
needed by later patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Before the next patch, fix coding style of the areas affected.
Change the type of the return value from cpu_has_work() and
qemu_cpu_has_work() to bool.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
| |
Make cpu_loop_exit() take a parameter for CPUState instead of relying
on global env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
| |
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Function gen_pc_load was introduced in commit
d2856f1ad4c259e5766847c49acbb4e390731bd4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a10402f1644128b66414ca8f86bdea9ae7c.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
|
|
|
|
|
|
|
|
| |
SH4 is always using softfloat, so it's possible to have helpers directly
taking float32 or float64 value. This allow to get rid of conversions
through CPU_{Float,Double}U.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All targets except SH4 have the same cpu_halted() routine, and it has
only one caller. It is therefore a good candidate for inlining.
The difference is the handling of the intr_at_halt, which is necessary
to ignore SR.BL when sleeping. Move intr_at_halt handling out of it, by
setting this variable while executing the sleep instruction, and
clearing it when the CPU has been woken-up by an interrupt, whatever the
state of SR.BL. Also rename this variable in_sleep.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
| |
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
Update the PTEH register to contain the VPN at which an MMU
exception occured as specified by the SH4 reference.
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
| |
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
| |
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
| |
Exception index of address read error should be 0x0e0.
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
| |
In cpu_sh4_invalidate_tlb, the UTLB was invalidated twice and the
ITLB left unchaged, probably because of some unfortunate copy/paste.
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|