summaryrefslogtreecommitdiffstats
path: root/target-cris
Commit message (Collapse)AuthorAgeFilesLines
* gdbstub: Allow target CPUs to specify watchpoint STOP_BEFORE_ACCESS flagPeter Maydell2014-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | GDB assumes that watchpoint set via the gdbstub remote protocol will behave in the same way as hardware watchpoints for the target. In particular, whether the CPU stops with the PC before or after the insn which triggers the watchpoint is target dependent. Allow guest CPU code to specify which behaviour to use. This fixes a bug where with guest CPUs which stop before the accessing insn GDB would manually step forward over what it thought was the insn and end up one insn further forward than it should be. We set this flag for the CPU architectures which set gdbarch_have_nonsteppable_watchpoint in gdb 7.7: ARM, CRIS, LM32, MIPS and Xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Michael Walle <michael@walle.cc> (for lm32) Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
* target-cris: Use cpu_exec_interrupt qom hookRichard Henderson2014-09-253-0/+33
| | | | | | | | Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1410626734-3804-11-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* trace: [tcg] Include TCG-tracing header on all targetsLluís Vilanova2014-08-121-0/+3
| | | | | Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* target-cris/translate.c: Remove _t_gen_mov_TN_env and _t_gen_mov_env_TNPeter Maydell2014-06-091-17/+2
| | | | | | | | | | | | | | | The wrapper functions _t_gen_mov_TN_env and _t_gen_mov_env_TN are only used via their accompanying non-underscore macros. The check they add on offset is thus pointless, since the compiler will complain if the struct field passed to the macro is not part of the struct. Remove the functions and make the macros directly expand to the appropriate tcg_gen_{ld,st}_tl calls. This conveniently avoids a warning due to _t_gen_mov_TN_env() being unused. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* target-cris/translate.c: Remove t_gen_mov_TN_reg and t_gen_mov_reg_TNPeter Maydell2014-06-092-19/+4
| | | | | | | | | | Remove the t_gen_mov_TN_reg and t_gen_mov_reg_TN wrappers: the latter is completely unused, and the former only used in a few places (which are thus inconsistent with the rest of the decoder which directly accesses cpu_R[]). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* softmmu: introduce cpu_ldst.hPaolo Bonzini2014-06-053-2/+3
| | | | | | | | | | This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* softmmu: commonize helper definitionsPaolo Bonzini2014-06-051-14/+0
| | | | | | | | | They do not need to be in op_helper.c. Because cputlb.c now includes softmmu_template.h twice for each size, io_readX must be elided the second time through. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* tcg: Invert the inclusion of helper.hRichard Henderson2014-05-283-8/+3
| | | | | | | | | | Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* cputlb: Change tlb_set_page() argument to CPUStateAndreas Färber2014-03-131-1/+1
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cputlb: Change tlb_flush() argument to CPUStateAndreas Färber2014-03-131-1/+1
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cputlb: Change tlb_flush_page() argument to CPUStateAndreas Färber2014-03-132-4/+11
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: Replace DisasContext::env field with CRISCPUAndreas Färber2014-03-132-16/+16
| | | | | | This cleans up repeated cris_env_get_cpu() for cpu_abort(). Signed-off-by: Andreas Färber <afaerber@suse.de>
* exec: Change cpu_abort() argument to CPUStateAndreas Färber2014-03-133-11/+11
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* translate-all: Change cpu_restore_state() argument to CPUStateAndreas Färber2014-03-131-1/+1
| | | | | | This lets us drop some local variables in tlb_fill() functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu-exec: Change cpu_loop_exit() argument to CPUStateAndreas Färber2014-03-131-2/+2
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* exec: Change tlb_fill() argument to CPUStateAndreas Färber2014-03-131-3/+4
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber2014-03-133-5/+6
| | | | | | | | Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber2014-03-132-11/+13
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber2014-03-134-15/+19
| | | | | | | | Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Factor out cpu_generic_init()Andreas Färber2014-03-131-12/+1
| | | | | | | All targets using it gain the ability to set -cpu name,key=value,... options via the default TYPE_CPU CPUClass::parse_features() implementation. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_has_work() into a CPUClass hookAndreas Färber2014-03-132-5/+6
| | | | | | | | | Default to false. Tidy variable naming and inline cast uses while at it. Tested-by: Jia Liu <proljc@gmail.com> (or32) Signed-off-by: Andreas Färber <afaerber@suse.de>
* cris: Add interrupt signals to the CPU deviceEdgar E. Iglesias2014-02-032-0/+24
| | | | | Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* cris: Abort when a v10 takes interrupts while in a delayslotEdgar E. Iglesias2014-02-031-0/+5
| | | | | | | This is an internal error as the CRISv10 should mask interrupts while executing delay slots. Bail out sooner rather than later. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* cris: Add "any" as alias for "crisv32" in user emulationEdgar E. Iglesias2014-02-031-0/+6
| | | | | Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* target-cris: Use new qemu_ld/st opcodesRichard Henderson2013-12-081-25/+4
| | | | | | | | | | Using the new opcodes we can reduce if/else trees to a single statement. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* tcg: Remove stray semi-colons from target-*/helper.hRichard Henderson2013-10-101-4/+4
| | | | | | | | | | | | | | | During GEN_HELPER=1, these are actually stray top-level semi-colons which are technically invalid ISO C, but GCC accepts as an extension. If we added enough __extension__ markers that we could dare use -Wpedantic, we'd see warning: ISO C does not allow extra ‘;’ outside of a function This will become a hard error in the next patch, wherein those ; will appear in the middle of a data structure. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Move helper registration into tcg_context_initRichard Henderson2013-10-101-3/+0
| | | | | | No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
* tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson2013-09-021-1/+1
| | | | | | | And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
* cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"Andreas Färber2013-07-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code. This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed". The reason for the failure is that CPUClass::kvm_fd is not yet initialized in the following call graph: ->x86_cpu_realizefn ->x86_cpu_apic_realize ->qdev_init ->device_set_realized ->device_reset (hotplugged == 1) ->apic_reset_common ->vapic_base_update ->kvm_apic_vapic_base_update This causes attempted KVM vCPU ioctls to fail. By contrast, in the non-hotplug case the APIC is reset much later, when the vCPU is already initialized. As a quick and safe solution, move the qemu_init_vcpu() call back into the targets' realize functions. Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386) Tested-by: Jia Liu <proljc@gmail.com> (for openrisc) Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: Factor out CPUClass::gdb_read_register() hook for v10Andreas Färber2013-07-273-6/+9
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Introduce CPUClass::gdb_{read,write}_register()Andreas Färber2013-07-274-2/+15
| | | | | | | | Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
* gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functionsAndreas Färber2013-07-271-15/+15
| | | | | | | | | | | | | This avoids polluting the global namespace with a non-prefixed macro and makes it obvious in the call sites that we return. Semi-automatic conversion using, e.g., sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c followed by manual tweaking for sparc's GET_REGA() and Coding Style. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: Move cpu_gdb_{read,write}_register()Andreas Färber2013-07-271-0/+125
| | | | Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regsAndreas Färber2013-07-261-0/+2
| | | | | | | | | | | | | CPUState::gdb_num_regs replaces num_g_regs. CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS. Allows building gdb_register_coprocessor() for xtensa, too. As a side effect this should fix coprocessor register numbering for SMP. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber2013-07-233-3/+9
| | | | | | | | | | | | Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber2013-07-231-3/+4
| | | | | | | Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()Andreas Färber2013-07-231-4/+0
| | | | | | | Where no extra implementation is needed, fall back to CPUClass::set_pc(). Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Introduce CPUClass::set_pc() for gdb_set_cpu_pc()Andreas Färber2013-07-231-0/+8
| | | | | | | This moves setting the Program Counter from gdbstub into target code. Use vaddr type as upper-bound replacement for target_ulong. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move reset logging to CPUStateAndreas Färber2013-07-091-5/+0
| | | | | | | | | | | x86 was using additional CPU_DUMP_* flags, so make that configurable in CPUClass::reset_dump_flags. This adds reset logging for alpha, unicore32 and xtensa. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber2013-07-091-1/+1
| | | | | | | | | | | | | | | | Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: Change gen_intermediate_code_internal() argument to CRISCPUAndreas Färber2013-07-091-4/+5
| | | | | | | | | Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: gen_intermediate_code_internal() should be inlinedAndreas Färber2013-07-091-1/+1
| | | | | | | Cc: qemu-stable@nongnu.org Reported-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Drop unnecessary dynamic casts in *_env_get_cpu()Andreas Färber2013-07-091-1/+1
| | | | | | | | | | | | | | | | | A transition from CPUFooState to FooCPU can be considered safe, just like FooCPU::env access in the opposite direction. The only benefit of the FOO_CPU() casts would be protection against bogus CPUFooState pointers, but then surrounding code would likely break, too. This should slightly improve interrupt etc. performance when going from CPUFooState to FooCPU. For any additional CPU() casts see 3556c233d931ad5ffa46a35cb25cfc057732ebb8 (qom: allow turning cast debugging off). Reported-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell2013-07-091-14/+0
| | | | | | | | | | | | | The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber2013-06-281-1/+0
| | | | | | | | This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber2013-06-284-3/+11
| | | | | | | | | Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris: Override do_interrupt for pre-v32 CPU coresAndreas Färber2013-04-163-6/+17
| | | | | | | | | Instead of forwarding from cris_cpu_do_interrupt() to do_interruptv10(), override CPUClass::do_interrupt with crisv10_cpu_do_interrupt() in the newly introduced class_init functions. Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber2013-03-124-4/+10
| | | | | | | | | | This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
* cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber2013-03-123-7/+9
| | | | | | | | | | Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
* target-cris/helper.c: Update Coding StyleAndreas Färber2013-03-121-197/+196
| | | | | | | | | | | Reindent, add missing braces and drop/adjust whitespace. Prepares for CPUArchState-to-CPUState field movements in cpu_cris_handle_mmu_fault(), do_interruptv10() and do_interrupt(). The remaining functions were so minor that they can be fixed in one go. Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
OpenPOWER on IntegriCloud